* doc/xml/manual/messages.xml: Switch link to www.oracle.com
	to https.

From-SVN: r264723

	* doc/xml/manual/policy_data_structures_biblio.xml: Update
	link to Microsoft Component Model Object Technologies.

From-SVN: r264722

2018-09-30  Paul Thomas  <pault@gcc.gnu.org>

	PR fortran/70149
	* trans-decl.c (gfc_get_symbol_decl): A deferred character
	length pointer that is initialized needs the string length to
	be initialized as well.

2018-09-30  Paul Thomas  <pault@gcc.gnu.org>

	PR fortran/70149
	* gfortran.dg/deferred_character_24.f90 : New test.

From-SVN: r264721

From-SVN: r264720

When passing and returning BLKmode values in 2 integer registers, use
1 TImode register instead of 2 DImode registers. Otherwise, V1TImode
may be used to move and store such BLKmode values, which prevent RTL
optimizations.

gcc/

	PR target/87370
	* config/i386/i386.c (construct_container): Use TImode for
	BLKmode values in 2 integer registers.

gcc/testsuite/

	PR target/87370
	* gcc.target/i386/pr87370.c: New test.

From-SVN: r264716

2018-09-29  Paul Thomas  <pault@gcc.gnu.org>

	PR fortran/65667
	* trans-expr.c (gfc_trans_assignment_1): If there is dependency
	fix the rse stringlength.

2018-09-29  Paul Thomas  <pault@gcc.gnu.org>

	PR fortran/65667
	* gfortran.dg/dependency_52.f90 : New test.

From-SVN: r264715

	* builtins.c (unterminated_array): Pass in c_strlen_data * to
	c_strlen rather than just a tree *.
	(c_strlen): Change NONSTR argument to a c_strlen_data pointer.
	Update recursive calls appropriately.  If caller did not provide a
	suitable data pointer, create a local one.  When a non-terminated
	string is discovered, bubble up information about the string via the
	c_strlen_data object.
	* builtins.h (c_strlen): Update prototype.
	(c_strlen_data): New structure.
	* gimple-fold.c (get_range_strlen): Update calls to c_strlen.
	For a type 2 call, if c_strlen indicates a non-terminated string
	use the length of the non-terminated string.
	(gimple_fold_builtin_stpcpy): Update calls to c_strlen.

From-SVN: r264712

	PR target/87467
	* config/i386/avx512fintrin.h (_mm512_abs_pd, _mm512_mask_abs_pd): Use
	__m512d type for __A argument rather than __m512.

	* gcc.target/i386/avx512f-abspd-1.c (SIZE): Divide by two.
	(CALC): Use double instead of float.
	(TEST): Adjust to test _mm512_abs_pd and _mm512_mask_abs_pd rather than
	_mm512_abs_ps and _mm512_mask_abs_ps.

From-SVN: r264711

	* doc/xml/gnu/fdl-1.3.xml: The Free Software Foundation web
	site now uses https. Also omit the unnecessary trailing slash.
	* doc/xml/gnu/gpl-3.0.xml: Ditto.

From-SVN: r264710

From-SVN: r264709

	* match.pd (simple_comparison): Don't optimize if either operand is
	a function pointer when target needs function pointer canonicalization.

From-SVN: r264705

Now that e.g. ASM_CPU_POWER5_SPEC is always "-mpower5" it is clearer and
easier to just write that directly.


	* config/rs6000/driver-rs6000.c (asm_names): Adjust the entries for
	power5 .. power9 to remove indirection.
	* config/rs6000/rs6000.h (ASM_CPU_POWER5_SPEC, ASM_CPU_POWER6_SPEC,
	ASM_CPU_POWER7_SPEC, ASM_CPU_POWER8_SPEC, ASM_CPU_POWER9_SPEC,
	ASM_CPU_476_SPEC): Delete.
	(ASM_CPU_SPEC): Adjust.
	(EXTRA_SPECS): Delete asm_cpu_power5, asm_cpu_power6, asm_cpu_power7,
	asm_cpu_power8, asm_cpu_power9, asm_cpu_476.

From-SVN: r264704

Every supported assembler supports these instructions.  Committing.


	* config.in: Delete HAVE_AS_DCI.
	* config/powerpcspe/powerpcspe.h: Treat HAVE_AS_DCI as always true.
	* config/rs6000/rs6000.h: Ditto.
	* configure.ac: Delete HAVE_AS_DCI.
	* configure: Regenerate.

From-SVN: r264703

All supported assemblers know lwsync, so we never need to generate this
instruction using the .long escape hatch.


	* config.in (HAVE_AS_LWSYNC): Delete.
	* config/powerpcspe/powerpcspe.h (TARGET_LWSYNC_INSTRUCTION): Delete.
	* config/powerpcspe/sync.md (*lwsync): Always generate lwsync, never
	do it as a .long .
	* config/rs6000/rs6000.h (TARGET_LWSYNC_INSTRUCTION): Delete.
	* config/rs6000/sync.md (*lwsync): Always generate lwsync, never do it
	as a .long .
	* configure.ac: Delete HAVE_AS_LWSYNC.
	* configure: Regenerate.

From-SVN: r264702

	* calls.c (expand_call): Try to do a tail call for thunks at -O0 too.
	* cgraph.h (struct cgraph_thunk_info): Add indirect_offset.
	(cgraph_node::create_thunk): Add indirect_offset parameter.
	(thunk_adjust): Likewise.
	* cgraph.c (cgraph_node::create_thunk): Add indirect_offset parameter
	and initialize the corresponding field with it.
	(cgraph_node::dump): Dump indirect_offset field.
	* cgraphclones.c (duplicate_thunk_for_node): Deal with indirect_offset.
	* cgraphunit.c (cgraph_node::analyze): Be prepared for external thunks.
	(thunk_adjust): Add indirect_offset parameter and deal with it.
	(cgraph_node::expand_thunk): Deal with the indirect_offset field and
	pass it to thunk_adjust.  Do not call the target hook if it's non-zero
	or if the thunk is external or local.  Fix formatting.  Do not chain
	the RESULT_DECL to BLOCK_VARS.  Pass the static chain to the target,
	if any, in the GIMPLE representation.
	* ipa-icf.c (sem_function::equals_wpa): Deal with indirect_offset.
	* lto-cgraph.c (lto_output_node): Write indirect_offset field.
	(input_node): Read indirect_offset field.
	* tree-inline.c (expand_call_inline): Pass indirect_offset field in the
	call to thunk_adjust.
	* tree-nested.c (struct nesting_info): Add thunk_p field.
	(create_nesting_tree): Set it.
	(convert_all_function_calls): Copy static chain from targets to thunks.
	(finalize_nesting_tree_1): Return early for thunks.
	(unnest_nesting_tree_1): Do not finalize thunks.
	(gimplify_all_functions): Do not gimplify thunks.
cp/
	* method.c (use_thunk): Adjust call to cgraph_node::create_thunk.
ada/
	* gcc-interface/decl.c (is_cplusplus_method): Do not require C++
	convention on Interfaces.
	* gcc-interface/trans.c (Subprogram_Body_to_gnu): Try to create a
	bona-fide thunk and hand it over to the middle-end.
	(get_controlling_type): New function.
	(use_alias_for_thunk_p): Likewise.
	(thunk_labelno): New static variable.
	(make_covariant_thunk): New function.
	(maybe_make_gnu_thunk): Likewise.
	* gcc-interface/utils.c (finish_subprog_decl): Set DECL_CONTEXT of the
	result DECL here instead of...
	(end_subprog_body): ...here.

Co-Authored-By: Pierre-Marie de Rodat <derodat@adacore.com>

From-SVN: r264701

functions.h (__foreign_iterator_aux3(const _Safe_iterator<>&, const _InputeIter&, const _InputIter&, __true_type)): Use empty() rather than begin() == end().

2018-09-28  François Dumont  <fdumont@gcc.gnu.org>

	* include/debug/functions.h
	(__foreign_iterator_aux3(const _Safe_iterator<>&, const _InputeIter&,
	const _InputIter&, __true_type)): Use empty() rather than begin() ==
	end().

From-SVN: r264699

gcc/ChangeLog:
	* opt-suggestions.c (option_proposer::build_option_suggestions):
	Release "option_values".

From-SVN: r264698

As noted at Cauldron, dumpfile.c currently emits "note: " for all kinds
of dump message, so that (after filtering) there's no distinction between
MSG_OPTIMIZED_LOCATIONS vs MSG_NOTE vs MSG_MISSED_OPTIMIZATION in the
textual output.

This patch changes dumpfile.c so that the "note: " varies to show
which MSG_* was used, with the string prefix matching that used for
filtering in -fopt-info, hence e.g.
  directive_unroll_3.f90:24:0: optimized: loop unrolled 7 times
and:
  pr19210-1.c:24:3: missed: missed loop optimization: niters analysis ends up with assumptions.

The patch adds "dg-optimized" and "dg-missed" directives for use
in the testsuite for matching these (with -fopt-info on stderr; they
don't help for dumpfile output).

The patch also converts the various problem-reporting dump messages
in coverage.c:get_coverage_counts to use MSG_MISSED_OPTIMIZATION
rather than MSG_OPTIMIZED_LOCATIONS, as the docs call out "optimized"
as
  "information when an optimization is successfully applied",
whereas "missed" is for
  "information about missed optimizations",
and problems with profile data seem to me to fall much more into the
latter category than the former.  Doing so requires converting a few
tests from using "-fopt-info" (which is implicitly
"-fopt-info-optimized-optall") to getting the "missed" optimizations.
Changing them to "-fopt-info-missed" added lots of noise from the
vectorizer, so I changed these tests to use "-fopt-info-missed-ipa".

gcc/ChangeLog:
	* coverage.c (get_coverage_counts): Convert problem-reporting dump
	messages from MSG_OPTIMIZED_LOCATIONS to MSG_MISSED_OPTIMIZATION.
	* dumpfile.c (kind_as_string): New function.
	(dump_loc): Rather than a hardcoded prefix of "note: ", use
	kind_as_string to vary the prefix based on dump_kind.
	(selftest::test_capture_of_dump_calls): Update for above.

gcc/testsuite/ChangeLog:
	* c-c++-common/unroll-1.c: Update expected output from "note" to
	"optimized".
	* c-c++-common/unroll-2.c: Likewise.
	* c-c++-common/unroll-3.c: Likewise.
	* g++.dg/tree-ssa/dom-invalid.C: Update expected output from
	dg-message to dg-missed.  Convert param from -fopt-info to
	-fopt-info-missed-ipa.
	* g++.dg/tree-ssa/pr81408.C: Update expected output from
	dg-message to dg-missed.
	* g++.dg/vect/slp-pr56812.cc: Update expected output from
	dg-message to dg-optimized.
	* gcc.dg/pr26570.c: Update expected output from dg-message to
	dg-missed.  Convert param from -fopt-info to
	-fopt-info-missed-ipa.
	* gcc.dg/pr32773.c: Likewise.
	* gcc.dg/tree-ssa/pr19210-1.c: Update expected output from
	dg-message to dg-missed.
	* gcc.dg/unroll-2.c: Update expected output from dg-message to
	dg-optimized.
	* gcc.dg/vect/nodump-vect-opt-info-1.c: Likewise.  Convert param
	from -fopt-info to -fopt-info-vec.
	* gfortran.dg/directive_unroll_1.f90: Update expected output from
	"note" to "optimized".
	* gfortran.dg/directive_unroll_2.f90: Likewise.
	* gfortran.dg/directive_unroll_3.f90: Likewise.
	* gnat.dg/unroll4.adb: Likewise.
	* lib/gcc-dg.exp (dg-optimized): New procedure.
	(dg-missed): New procedure.

From-SVN: r264697

As reported in
<https://gcc.gnu.org/ml/gcc-patches/2018-09/msg01684.html>, some
fp-int-convert tests fail after my fix for PR c/87390, in Arm /
AArch64 configurations where _Float16 uses excess precision by
default.  The issue is comparisons of the results of a conversion by
assignment (compile-time or run-time) from integer to floating-point
with the original integer value; previously this would compare against
an implicit compile-time conversion to the target type, but now, for
C11 and later, it compares against an implicit compile-time conversion
to a possibly wider evaluation format.  This is fixed by adding casts
to the test so that the comparison is with a value converted
explicitly to the target type at compile time, without any use of a
wider evaluation format.

	PR c/87390
	* gcc.dg/torture/fp-int-convert.h (TEST_I_F_VAL): Convert integer
	values explicitly to target type for comparison.

From-SVN: r264696

	* config/i386/i386.h (SSE_REGNO): Fix check for FIRST_REX_SSE_REG.
	(GET_SSE_REGNO): Rename from SSE_REGNO.  Update all uses for rename.

From-SVN: r264695

	* config/i386/i386.h (CC_REGNO): Remove FPSR_REGS.
	* config/i386/i386.c (ix86_fixed_condition_code_regs): Use
	INVALID_REGNUM instead of FPSR_REG.
	(ix86_md_asm_adjust): Do not clobber FPSR_REG.
	* config/i386/i386.md: Update comment of FP compares.
	(fldenv): Do not clobber FPSR_REG.

From-SVN: r264694

From-SVN: r264693

re PR testsuite/87433 (gcc.dg/zero_bits_compound-1.c and gcc.target/aarch64/ashltidisi.c tests fail after combine two to two instruction patch on aarch64)

2018-09-28  Steve Ellcey  <sellcey@cavium.com>

	PR testsuite/87433
	* gcc.target/aarch64/ashltidisi.c: Expect 3 asr instructions
	instead of 4.

From-SVN: r264692

re PR testsuite/87433 (gcc.dg/zero_bits_compound-1.c and gcc.target/aarch64/ashltidisi.c tests fail after combine two to two instruction patch on aarch64)

2018-09-28  Steve Ellcey  <sellcey@cavium.com>

	PR testsuite/87433
	* gcc.dg/zero_bits_compound-1.c: Do not run on aarch64*-*-*.

From-SVN: r264691

    
    Fix a bug in the parser code that decides whether a given name should
    be considered exported or not. The function Lex::is_exported_name
    (which assumes that its input is a mangled name) was being called on
    non-mangled (raw utf-8) names in various places. For the bug in
    question this caused an imported package to be registered under the
    wrong name. To fix the issue, rename 'Lex::is_exported_name' to
    'Lex::is_exported_mangled_name', and add a new 'Lex::is_exported_name'
    that works on utf-8 strings.
    
    Fixes golang/go#27836.
    
    Reviewed-on: https://go-review.googlesource.com/137736

From-SVN: r264690

2018-09-28  Richard Biener  <rguenther@suse.de>

	* tree.h (BLOCK_ORIGIN): New.
	* omp-expand.c (grid_expand_target_grid_body): Assign
	BLOCK_ORIGIN to BLOCK_ABSTRACT_ORIGIN.
	* tree-inline.c (remap_block): Likewise.

	* auto-profile.c (get_function_decl_from_block): Simplify
	by eliding the BLOCK_ABSTRACT_ORIGIN chasing.
	* langhooks.c (lhd_print_error_function): Likewise.
	* optinfo-emit-json.cc (optrecord_json_writer::inlining_chain_to):
	Likewise.
	* tree-ssa-live.c (remove_unused_scope_block_p): Likewise.
	* tree.c (block_nonartificial_location): Likewise.
	(block_ultimate_origin): Likewise.
	* tree-pretty-print.c (percent_K_format): Likewise.  Remove
	no longer needed LTO case.

	cp/
	* error.c (cp_print_error_function): Simplify by eliding
	the BLOCK_ABSTRACT_ORIGIN chasing.

From-SVN: r264689

This patch was part of the original patch we acquired from Honza and Martin.

It simplifies nested vec_merge operations using the same mask.

Self-tests are included.

2018-09-28  Andrew Stubbs  <ams@codesourcery.com>
	    Jan Hubicka  <jh@suse.cz>
	    Martin Jambor  <mjambor@suse.cz>

	* simplify-rtx.c (simplify_merge_mask): New function.
	(simplify_ternary_operation): Use it, also see if VEC_MERGEs with the
	same masks are used in op1 or op2.
	(test_vec_merge): New function.
	(test_vector_ops): Call test_vec_merge.

Co-Authored-By: Jan Hubicka <jh@suse.cz>
Co-Authored-By: Martin Jambor <mjambor@suse.cz>

From-SVN: r264688

	* config/sparc/sparc-protos.h (sparc_branch_cost): Declare.
	* config/sparc/sparc.h (BRANCH_COST): Call sparc_branch_cost.
	* config/sparc/sparc.c (struct processor_costs): Add branch_cost field.
	(cypress_costs): Set it.
	(supersparc_costs): Likewise.
	(hypersparc_costs): Likewise.
	(leon_cost): Likewise.
	(leon3_costs): Likewise.
	(sparclet_costs): Likewise.
	(ultrasparc_costs): Likewise.
	(ultrasparc_costs): Likewise.
	(niagara_costs): Likewise.
	(niagara2_costs): Likewise.
	(niagara3_costs): Likewise.
	(niagara4_costs): Likewise.
	(niagara7_costs): Likewise.
	(m8_costs): Likewise.
	(TARGET_CAN_FOLLOW_JUMP): Define.
	(pass_work_around_errata::gate): Minor tweak.
	(sparc_option_override): Remove MASK_FSMULD mask for V7 processors.
	Do not set both MASK_VIS4 and MASK_VIS4B for M8 processor.
	Automaitcally clear MASK_FSMULD mask for V7 processors.
	(sparc_can_follow_jump): New static function.
	(output_ubranch): Deal with CROSSING_JUMP_P.
	(sparc_use_sched_lookahead): Rewrite using switch statement.
	(sparc_issue_rate): Reorder.
	(sparc_branch_cost): New function.

From-SVN: r264687

From-SVN: r264685

This fixes the one remaining case where the stricter vec_splat checking
complains in the testsuite.


	* g++.dg/ext/altivec-6.C: Change the vec_splat second argument to a
	valid value, in the "vector bool int" case.

From-SVN: r264681

gcc/ChangeLog:

	* tree.h (tree_to_shwi): Add attribute nonnull and pure.
	(tree_to_poly_int64, tree_to_uhwi, tree_to_poly_uint64): Same.
	(int_fits_type_p): Same.

gcc/ada/ChangeLog:

	* gcc-interface/utils.c (make_packable_type): Introduce a temporary
	to avoid -Wnonnull.
	(unchecked_convert): Same.

From-SVN: r264680

2018-09-27  Jinsong Ji  <jji@us.ibm.com>
	    Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/mmintrin.h (_mm_unpackhi_pi8): Change __int128_t
	to __int128.
	(_mm_unpacklo_pi8): Likewise.
	(_mm_add_pi8): Likewise.
	(_mm_add_pi16): Likewise.
	(_mm_add_pi32): Likewise.
	(_mm_sub_pi8): Likewise.
	(_mm_sub_pi16): Likewise.
	(_mm_sub_pi32): Likewise.
	(_mm_cmpgt_pi8): Likewise.
	(_mm_cmpeq_pi16): Likewise.
	(_mm_cmpgt_pi16): Likewise.
	(_mm_cmpeq_pi32): Likewise.
	(_mm_cmpgt_pi32): Likewise.
	(_mm_adds_pi8): Likewise.
	(_mm_adds_pi16): Likewise.
	(_mm_adds_pu8): Likewise.
	(_mm_adds_pu16): Likewise.
	(_mm_subs_pi8): Likewise.
	(_mm_subs_pi16): Likewise.
	(_mm_subs_pu8): Likewise.
	(_mm_subs_pu16): Likewise.
	(_mm_madd_pi16): Likewise.
	(_mm_mulhi_pi16): Likewise.
	(_mm_mullo_pi16): Likewise.
	(_mm_sll_pi16): Likewise.
	(_mm_sra_pi16): Likewise.
	(_mm_srl_pi16): Likewise.
	(_mm_set1_pi16): Likewise.
	(_mm_set1_pi8): Likewise.
	* config/rs6000/xmmintrin.h (_mm_max_pi16): Likewise.
	(_mm_max_pu8): Likewise.
	(_mm_min_pi16): Likewise.
	(_mm_min_pu8): Likewise.

From-SVN: r264678

	* config/i386/i386.md (UNSPEC_FLDCW): Remove.

From-SVN: r264677

	* config/i386/i386.md (FPSR_REG): Remove.
	(x86_fnstcw_1): Use (const_int 0) instead of FPCR_REG.
	(x86_fldcw_1): Remove insn pattern.
	(fnstenv): Do not clobber FPCR_REG.
	(fldenv): Ditto.
	* config/i386/i386.h (FIXED_REGISTERS) Remove fpsr register.
	(CALL_USED_REGISTERS): Ditto.
	(REG_ALLOC_ORDER): Ditto.
	(REG_CLASS_CONTENTS): Ditto.
	(HI_REGISTER_NAMES): Ditto.
	(ADDITIONAL_REGISTER_NAMES): Use defines instead
	of numerical constants.
	* config/i386/i386.c (regclass_map): Remove fpsr register.
	(dbx_register_map): Ditto.
	(dbx64_register_map): Ditto.
	(svr4_dbx_register_map): Ditto.
	(print_reg): Do not handle FPCR_REG.

testsuite/ChangeLog:

	* gcc.dg/rtl/x86_64/dfinit.c: Update scan-rtl-dump string.
	* gcc.dg/rtl/x86_64/times-two.c.before-df.c: Ditto.
	* gcc.target/i386/pr79804.c (foo): Use register "19", not "20".

From-SVN: r264676

This deletes most HAVE_AS_* that determine if the assembler supports
some ISA level (and also HAVE_AS_MFPGPR and HAVE_AS_DFP).

These are not useful: we will only generate an instruction that requires
some newer ISA if the user specifically asked for it (with -mcpu=, say).
If the assembler cannot handle that, it is fine if it gives an error.

They also hurt: it increases the number of possible situations that all
need handling and all need testing.  We do not handle all cases, and
obviously do not test all either.

This patch removes:

HAVE_AS_POPCNTB (power5,  2.02)
HAVE_AS_FPRND   (power5+, 2.04)
HAVE_AS_CMPB    (power6,  2.05)
HAVE_AS_POPCNTD (power7,  2.06)
HAVE_AS_POWER8  (power8,  2.07)
HAVE_AS_POWER9  (power9,  3.0)

HAVE_AS_DFP     (power6,  2.05, server)
HAVE_AS_MFPGPR  (power6x but not later, not arch)


	PR target/87149
	* config.in (HAVE_AS_CMPB, HAVE_AS_DFP, HAVE_AS_FPRND, HAVE_AS_MFPGPR,
	HAVE_AS_POPCNTB, HAVE_AS_POPCNTD, HAVE_AS_POWER8, HAVE_AS_POWER9):
	Delete, always treat as true.
	* config/powerpcspe/powerpcspe.c (rs6000_option_override_internal):
	Ditto.  Simplify remaining code.
	* config/powerpcspe/powerpcspe.h: Ditto.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Ditto.
	Simplify remaining code.
	(rs6000_expand_builtin): Ditto.
	* config/rs6000/rs6000.h: Ditto.
	* configure.ac: Ditto.
	* configure: Regenerate.

From-SVN: r264675

2018-09-27  Martin Liska  <mliska@suse.cz>

	* coverage.c (get_coverage_counts): Revert the formatting
	of missing profile opt info.

	* g++.dg/pr60518.C: Add -Wno-missing-profile.
	* g++.dg/torture/pr59265.C: Likewise.
	* g++.dg/tree-prof/morefunc.C: Likewise.
	* g++.dg/tree-ssa/dom-invalid.C: Likewise.
	* gcc.dg/pr26570.c: Likewise.
	* gcc.dg/pr32773.c: Likewise.
	* gcc.dg/pr40209.c: Likewise.
	* gcc.dg/pr51957-1.c: Likewise.
	* gcc.dg/pr80747.c: Likewise.
	* gcc.target/aarch64/pr62262.c: Likewise.

From-SVN: r264669

2018-09-27  Richard Biener  <rguenther@suse.de>

	PR testsuite/87451
	* gcc.dg/debug/dwarf2/inline5.c: Deal with different comment characters.

From-SVN: r264668

2018-09-27  Richard Biener  <rguenther@suse.de>

	PR debug/37801
	PR debug/87440
	* dwarf2out.c (set_block_origin_self): Do not mark outermost
	block as we do not output that.
	(gen_inlined_subroutine_die): Elide the originally outermost
	block, matching what we do for concrete instances.
	(decls_for_scope): Add parameter specifying whether to recurse
	to subblocks.

	* gcc.dg/debug/dwarf2/inline2.c: Adjust.
	* gcc.dg/debug/dwarf2/inline4.c: New testcase.

From-SVN: r264667

This is an update of the patch posted to PR82089 long ago.  We ran into the
same bug on GCN, so we need this fixed as part of this series.

2018-09-27  Andrew Stubbs  <ams@codesourcery.com>
            Tom de Vries  <tom@codesourcery.com>

	PR 82089

	gcc/
	* expmed.c (emit_cstore): Fix handling of result_mode == BImode and
	STORE_FLAG_VALUE == 1.

Co-Authored-By: Tom de Vries <tom@codesourcery.com>

From-SVN: r264666

2018-09-27  Paolo Carlini  <paolo.carlini@oracle.com>

	PR c++/67544
	* g++.dg/concepts/pr67544.C: New.

From-SVN: r264665