When storing a TLS symbol to memory, always use an intermediate register to load it.

gcc/
xxxx-xx-xx  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (prepare_move_operands): Always use an
	intermediate register when storing a TLS symbols.

gcc/
xxxx-xx-xx  Claudiu Zissulescu  <claziss@synopsys.com>

	* gcc/testsuite/gcc.target/arc/tls-2.c: New test.
	* gcc/testsuite/gcc.target/arc/tls-3.c: Likewise.

From-SVN: r273657

From-SVN: r273656

	PR c++/67853
	* g++.dg/cpp0x/decltype72.C: New test.

From-SVN: r273652

The force_reg in or1k_expand_compare is hard coded for SImode, which is fine as
this used to only be used on SI expands.  However, with FP support this will
cause issues.  In general we should only force the right hand operand to a
register if its an immediate.  This patch adds an condition to check for that.

gcc/ChangeLog:

	* config/or1k/or1k.c (or1k_expand_compare): Check for int before
	force_reg.

From-SVN: r273651

This adds support for OpenRISC hardware floating point instructions.
This is enabled with the -mhard-float option.

Double-prevision floating point operations work using register pairing as
specified in: https://openrisc.io/proposals/orfpx64a32.  This has just been
added in the OpenRISC architecture specification 1.3.
This is enabled with the -mdouble-float option.

Not all architectures support unordered comparisons so an option,
-munordered-float is added.

Currently OpenRISC does not support sf/df or df/sf conversions, but this has
also just been added in architecture specification 1.3.

gcc/ChangeLog:

	* config.gcc (or1k*-*-*): Add mhard-float, mdouble-float, msoft-float
	and munordered-float validations.
	* config/or1k/constraints.md (d): New register constraint.
	* config/or1k/predicates.md (fp_comparison_operator): New.
	* config/or1k/or1k.c (or1k_print_operand): Add support for printing 'd'
	operands.
	(or1k_expand_compare): Normalize unordered comparisons.
	* config/or1k/or1k.h (reg_class): Define DOUBLE_REGS.
	(REG_CLASS_NAMES): Add "DOUBLE_REGS".
	(REG_CLASS_CONTENTS): Add contents for DOUBLE_REGS.
	* config/or1k/or1k.md (type): Add fpu.
	(fpu): New instruction reservation.
	(F, f, fr, fi, FI, FOP, fop): New.
	(<fop><F:mode>3): New ALU instruction definition.
	(float<fi><F:mode>2): New conversion instruction definition.
	(fix_trunc<F:mode><fi>2): New conversion instruction definition.
	(fpcmpcc): New code iterator.
	(*sf_fp_insn): New instruction definition.
	(cstore<F:mode>4): New expand definition.
	(cbranch<F:mode>4): New expand definition.
	* config/or1k/or1k.opt (msoft-float, mhard-float, mdouble-float,
	munordered-float): New options.
	* doc/invoke.texi: Document msoft-float, mhard-float, mdouble-float and
	munordered-float.

From-SVN: r273650

gcc/ChangeLog:

	* config.gcc (or1k*-*-*): Add mrori and mror to validation.
	* doc/invoke.texi (OpenRISC Options): Add mrori option, rewrite all
	documenation to be more clear.
	* config/or1k/elf.opt (mboard=, mnewlib): Rewrite documentation to be
	more clear.
	* config/or1k/or1k.opt (mrori): New option.
	(mhard-div, msoft-div, mhard-mul, msoft-mul, mcmov, mror, msext,
	msfimm, mshftimm): Rewrite documentation to be more clear.
	* config/or1k/or1k.md (insn_support): Add ror and rori.
	(enabled): Add conditions for ror and rori.
	(rotrsi3): Replace condition for shftimm with ror and rori.

gcc/testsuite/ChangeLog:

	* gcc.target/or1k/ror-4.c: New file.
	* gcc.target/or1k/shftimm-1.c: Update test from rotate to shift
	as the shftimm option no longer controls rotate.

From-SVN: r273649

Fixes bad assembly logic with software divide as reported by Richard Selvaggi.
Also, add a basic test to verify the soft math works when enabled.

gcc/testsuite/ChangeLog:

	PR target/90362
	* gcc.target/or1k/div-mul-3.c: New test.

libgcc/ChangeLog:

	PR target/90362
	* config/or1k/lib1funcs.S (__udivsi3): Change l.sfeqi
	to l.sfeq and l.sfltsi to l.sflts equivalents as the immediate
	instructions are not available on every processor.  Change a
	l.bnf to l.bf to fix logic issue.

From-SVN: r273648

Volatile memory does not match the memory_operand predicate.  This
causes extra extend/mask instructions instructions when reading
from volatile memory.  On OpenRISC loading volatile memory can be
treated the same as regular memory loads which supports combined
sign/zero extends.  Fixing this eliminates the need for extra
extend/mask instructions.

This also adds a test provided by Richard Selvaggi which uncovered the
issue while we were looking into another issue.

gcc/ChangeLog:

	PR target/90363
	* config/or1k/or1k.md (zero_extend<mode>si2): Update predicate.
	(extend<mode>si2): Update predicate.
	* gcc/config/or1k/predicates.md (volatile_mem_operand): New.
	(reg_or_mem_operand): New.

gcc/testsuite/ChangeLog:

	PR target/90363
	* gcc.target/or1k/swap-1.c: New test.
	* gcc.target/or1k/swap-2.c: New test.

From-SVN: r273647

The recent change to move code into the new rs6000-call.c file is missing a
default value for the TARGET_NO_PROTOTYPE value (which only affects targets
that don’t include svr4.h).  Fixed by moving the fallback setting from
rs6000.c (which has no uses now) to rs6000-call.c.

2019-07-21  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.c (TARGET_NO_PROTOTYPE): Move from here...
	* config/rs6000/rs6000-call.c: ... to here.

From-SVN: r273646

2019-07-21  Thomas König  <tkoenig@gcc.gnu.org>

	PR libfortran/91030
	* gfortran.texi (GFORTRAN_FORMATTED_BUFFER_SIZE): Document
	(GFORTRAN_UNFORMATTED_BUFFER_SIZE): Likewise.

2019-07-21  Thomas König  <tkoenig@gcc.gnu.org>

	PR libfortran/91030
	* io/unix.c (BUFFER_SIZE): Delete.
	(BUFFER_FORMATTED_SIZE_DEFAULT): New variable.
	(BUFFER_UNFORMATTED_SIZE_DEFAULT): New variable.
	(unix_stream): Add buffer_size.
	(buf_read): Use s->buffer_size instead of BUFFER_SIZE.
	(buf_write): Likewise.
	(buf_init): Add argument unformatted.  Handle block sizes
	for unformatted vs. formatted, using defaults if provided.
	(fd_to_stream): Add argument unformatted in call to buf_init.
	* libgfortran.h (options_t): Add buffer_size_formatted and
	buffer_size_unformatted.
	* runtime/environ.c (variable_table): Add
	GFORTRAN_UNFORMATTED_BUFFER_SIZE and
	GFORTRAN_FORMATTED_BUFFER_SIZE.

From-SVN: r273643

From-SVN: r273640

	* config/rs6000/predicates.md (offsettable_mem_operand): Allow volatile
	memory.

From-SVN: r273633

	* config/rs6000/predicates.md (input_operand): Allow volatile memory.

From-SVN: r273632

Testcase from comex, see https://lwn.net/Articles/793932/ .


	* config/rs6000/predicates.md (lwa_operand): Allow volatile memory.

gcc/testsuite/
	* gcc.target/powerpc/volatile-mem.c: New testcase.

From-SVN: r273631

The new predicate accepts both memory_operand and volatile_mem_operand.


	* config/rs6000/predicates.md (volatile_mem_operand): Modernize syntax.
	(any_memory_operand): New predicate.
	(reg_or_mem_operand): Use it.

From-SVN: r273630

	PR target/91204
	* optabs.c (expand_unop): As fallback, expand ~op0 as op0 ^ -1.

	* gcc.c-torture/compile/pr91204.c: New test.

From-SVN: r273629

	* config/pa/pa.h (hppa_profile_hook): Delete declaration.
	* config/pa/pa-protos.h (hppa_profile_hook): Add declaration.

From-SVN: r273628

In general, when we see a dependent using-declaration we don't know whether
it names a function or not, so it doesn't get an OVERLOAD unless we see
overloads of the same name in the current class.  In the case of an
inherited constructor we could figure that out from the name, but it's
simpler to handle USING_DECL properly.

	* cp-tree.h (ovl_iterator::using_p): A USING_DECL by itself was also
	introduced by a using-declaration.

From-SVN: r273623

I was seeing memory consumption issues on the concepts-cxx2a
branch. push_scope was, surprisingly, at the top of -fmem-report, and
push_access_scope was pretty high.  Fixing them was pretty simple.

	* name-lookup.c (leave_scope): Do add class levels other than
	previous_class_level to free_binding_level.
	(invalidate_class_lookup_cache): Move from class.c, add to
	free_binding_level.
	* pt.c (saved_access_scope): Change from list to vec.

From-SVN: r273622

	* tree.def (OMP_LOOP): New tree code.
	* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE_BIND.
	(enum omp_clause_bind_kind): New enum.
	(struct tree_omp_clause): Add subcode.bind_kind.
	* tree.h (OMP_LOOP_CHECK): Rename to ...
	(OMP_LOOPING_CHECK): ... this.
	(OMP_FOR_BODY, OMP_FOR_CLAUSES, OMP_FOR_INIT, OMP_FOR_COND,
	OMP_FOR_INCR, OMP_FOR_PRE_BODY, OMP_FOR_ORIG_DECLS): Use
	OMP_LOOPING_CHECK instead of OMP_LOOP_CHECK.
	(OMP_CLAUSE_BIND_KIND): Define.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add
	bind clause entries.
	(walk_tree_1): Handle OMP_CLAUSE_BIND.
	* tree-pretty-print.c (dump_omp_clause): Likewise.
	(dump_generic_node): Handle OMP_LOOP.
	* gimplify.c (enum omp_region_type): Add ORT_IMPLICIT_TARGET.
	(in_omp_construct): New variable.
	(is_gimple_stmt): Handle OMP_LOOP.
	(gimplify_scan_omp_clauses): For lastprivate don't set
	check_non_private if code == OMP_LOOP.  For reduction clause
	on OMP_LOOP combined with parallel or teams propagate as shared
	on the combined construct.  Handle OMP_CLAUSE_BIND.
	(gimplify_adjust_omp_clauses): Handle OMP_CLAUSE_BIND.
	(gimplify_omp_for): Pass OMP_LOOP instead of OMP_{FOR,DISTRIBUTE}
	for constructs from a loop construct to gimplify_scan_omp_clauses.
	Don't predetermine iterator linear on OMP_SIMD from loop construct.
	(replace_reduction_placeholders, gimplify_omp_loop): New functions.
	(gimplify_omp_workshare): Use ORT_IMPLICIT_TARGET instead of trying
	to match the implicit ORT_TARGET construct around whole body.
	Temporarily clear in_omp_construct when processing body.
	(gimplify_expr): Handle OMP_LOOP.  For OMP_MASTER, OMP_TASKGROUP
	etc. temporarily set in_omp_construct when processing body.
	(gimplify_body): Create ORT_IMPLICIT_TARGET instead of ORT_TARGET.
	* omp-low.c (struct omp_context): Add loop_p.
	(build_outer_var_ref): Treat ctx->loop_p similarly to simd construct
	in that the original var might be private.
	(scan_sharing_clauses): Handle OMP_CLAUSE_BIND.
	(check_omp_nesting_restrictions): Adjust nesting restrictions for
	addition of loop construct.
	(scan_omp_1_stmt): Allow setjmp inside of loop construct.
gcc/c-family/
	* c-pragma.h (enum pragma_kind): Add PRAGMA_OMP_LOOP.
	(enum pragma_omp_clause): Add PRAGMA_OMP_CLAUSE_BIND.
	* c-pragma.c (omp_pragmas_simd): Add PRAGMA_OMP_LOOP entry.
	* c-common.h (enum c_omp_clause_split): Add C_OMP_CLAUSE_SPLIT_LOOP.
	* c-omp.c (c_omp_split_clauses): Add support for 4 new combined
	constructs with the loop construct.
gcc/c/
	* c-parser.c (c_parser_omp_clause_name): Handle bind clause.
	(c_parser_omp_clause_bind): New function.
	(c_parser_omp_all_clauses): Handle PRAGMA_OMP_CLAUSE_BIND.
	(OMP_LOOP_CLAUSE_MASK): Define.
	(c_parser_omp_loop): New function.
	(c_parser_omp_parallel, c_parser_omp_teams): Handle parsing of
	loop combined with parallel or teams.
	(c_parser_omp_construct): Handle PRAGMA_OMP_LOOP.
	* c-typeck.c (c_finish_omp_clauses): Handle OMP_CLAUSE_BIND.
gcc/cp/
	* cp-tree.h (OMP_FOR_GIMPLIFYING_P): Use OMP_LOOPING_CHECK
	instead of OMP_LOOP_CHECK.
	* parser.c (cp_parser_omp_clause_name): Handle bind clause.
	(cp_parser_omp_clause_bind): New function.
	(cp_parser_omp_all_clauses): Handle PRAGMA_OMP_CLAUSE_BIND.
	(OMP_LOOP_CLAUSE_MASK): Define.
	(cp_parser_omp_loop): New function.
	(cp_parser_omp_parallel, cp_parser_omp_teams): Handle parsing of
	loop combined with parallel or teams.
	(cp_parser_omp_construct): Handle PRAGMA_OMP_LOOP.
	(cp_parser_pragma): Likewise.
	* pt.c (tsubst_expr): Handle OMP_LOOP.
	* semantics.c (finish_omp_clauses): Handle OMP_CLAUSE_BIND.
gcc/testsuite/
	* c-c++-common/gomp/cancel-1.c: Adjust expected diagnostic wording.
	* c-c++-common/gomp/clauses-1.c (foo, baz, bar): Add order(concurrent)
	clause where allowed.  Add combined constructs with loop with all
	possible clauses.
	(qux): New function.
	* c-c++-common/gomp/loop-1.c: New test.
	* c-c++-common/gomp/loop-2.c: New test.
	* c-c++-common/gomp/loop-3.c: New test.
	* c-c++-common/gomp/loop-4.c: New test.
	* c-c++-common/gomp/loop-5.c: New test.
	* c-c++-common/gomp/order-3.c: Adjust expected diagnostic wording.
	* c-c++-common/gomp/simd-setjmp-1.c: New test.
	* c-c++-common/gomp/teams-2.c: Adjust expected diagnostic wording.
libgomp/
	* testsuite/libgomp.c-c++-common/loop-1.c: New test.

From-SVN: r273621

omp-low.c (lower_rec_input_clauses): Don't force simd arrays for lastprivate non-addressable iterator of a...

	* omp-low.c (lower_rec_input_clauses): Don't force simd arrays for
	lastprivate non-addressable iterator of a collapse(1) simd.

	* gcc.dg/vect/vect-simd-16.c: New test.

From-SVN: r273620

From-SVN: r273615

    
    The current Mark_inline_candidates helper looks only at budget when
    deciding to mark a function or method as inline (with the proviso that
    IR constructs not yet supported by the inliner are given artificially
    high cost). This patch changes the helper to also look at whether a
    function has the "go:noinline" pragma; if it does have the pragma
    there is no point putting it into the export data (it will just make
    the export data bigger).
    
    Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/186923

From-SVN: r273611

2019-07-17  Bill Seurer  <seurer@linux.vnet.ibm.com>

	* config/rs6000/rs6000-call.c (HAVE_AS_GNU_ATTRIBUTE): define value
	as in rs6000.c.

From-SVN: r273610

2019-07-19  François Dumont  <fdumont@gcc.gnu.org>

	* include/bits/stl_tempbuf.h (__detail::__return_temporary_buffer): Fix
	sized deallocation size computation.

From-SVN: r273609

This strips out a few driver specs that are only specifying a default state.
Also warn on an option now ignored, and add some comments to the driver specs
section.

2019-07-19  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.h (DRIVER_SELF_SPECS): Ignore X and Mach specs which
	refer to default conditions.  Warn for the 'y' spec which is ignored
	by current linkers.

From-SVN: r273608

The source file rs6000.c has grown to unreasonable size and is being
split up into several smaller source files.  This should improve
compilation speed for building gcc.

This is the second of several patches to do this and moves most of the
function call and builtin code to a new source file.

Bootstrapped and tested on powerpc64le-unknown-linux-gnu and
powerpc64-unknown-linux-gnu with no regressions.  Is this ok for trunk?


2019-07-17  Bill Seurer  <seurer@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (builtin_description, cpu_is_info,
	cpu_supports_info, builtin_hash_struct, builtin_hasher,
	builtin_hash_table, rs6000_builtin_info_type, rs6000_builtin_info,
	rs6000_aggregate_candidate, rs6000_discover_homogeneous_aggregate,
	rs6000_return_in_memory, rs6000_return_in_msb, call_ABI_of_interest,
	init_cumulative_args, rs6000_promote_function_mode,
	rs6000_must_pass_in_stack, is_complex_IBM_long_double,
	abi_v4_pass_in_fpr, rs6000_function_arg_padding,
	rs6000_function_arg_boundary, rs6000_parm_offset,
	rs6000_parm_start, rs6000_arg_size,
	rs6000_darwin64_record_arg_advance_flush,
	rs6000_darwin64_record_arg_advance_recurse,
	rs6000_darwin64_struct_check_p, rs6000_function_arg_advance_1,
	rs6000_function_arg_advance, rs6000_darwin64_record_arg_flush,
	rs6000_darwin64_record_arg_recurse, rs6000_darwin64_record_arg,
	rs6000_mixed_function_arg, rs6000_psave_function_arg,
	rs6000_finish_function_arg, rs6000_function_arg,
	rs6000_arg_partial_bytes, rs6000_pass_by_reference,
	rs6000_parm_needs_stack, rs6000_function_parms_need_stack,
	rs6000_reg_parm_stack_space, rs6000_move_block_from_reg,
	setup_incoming_varargs, rs6000_build_builtin_va_list, rs6000_va_start,
	rs6000_gimplify_va_arg, def_builtin, bdesc_3arg, bdesc_dst,
	bdesc_2arg, bdesc_altivec_preds, bdesc_abs, bdesc_1arg, bdesc_0arg,
	bdesc_htm, rs6000_overloaded_builtin_p, rs6000_overloaded_builtin_name,
	rs6000_expand_zeroop_builtin, rs6000_expand_mtfsf_builtin,
	rs6000_expand_mtfsb_builtin, rs6000_expand_set_fpscr_rn_builtin,
	rs6000_expand_set_fpscr_drn_builtin, rs6000_expand_unop_builtin,
	altivec_expand_abs_builtin, rs6000_expand_binop_builtin,
	altivec_expand_predicate_builtin, swap_endian_selector_for_mode,
	altivec_expand_lv_builtin, altivec_expand_stxvl_builtin,
	altivec_expand_stv_builtin, htm_spr_num, rs6000_htm_spr_icode,
	htm_expand_builtin, cpu_expand_builtin, rs6000_expand_ternop_builtin,
	altivec_expand_dst_builtin, altivec_expand_vec_init_builtin,
	get_element_number, altivec_expand_vec_set_builtin,
	altivec_expand_vec_ext_builtin, altivec_expand_builtin,
	rs6000_builtin_is_supported_p, rs6000_invalid_builtin,
	rs6000_fold_builtin, rs6000_builtin_valid_without_lhs,
	fold_build_vec_cmp, fold_compare_helper, fold_mergehl_helper,
	fold_mergeeo_helper, rs6000_gimple_fold_builtin,
	rs6000_expand_builtin, rs6000_vector_type,
	rs6000_init_builtins, rs6000_builtin_decl, altivec_init_builtins,
	htm_init_builtins, builtin_function_type, rs6000_common_init_builtins,
	rs6000_internal_arg_pointer, rs6000_output_mi_thunk): Move
	to rs6000-call.c.
	* config/rs6000/rs6000-call.c (builtin_description, cpu_is_info,
	cpu_supports_info, builtin_hash_struct, builtin_hasher,
	builtin_hash_table, rs6000_builtin_info_type, rs6000_builtin_info,
	rs6000_aggregate_candidate, rs6000_discover_homogeneous_aggregate,
	rs6000_return_in_memory, rs6000_return_in_msb, call_ABI_of_interest,
	init_cumulative_args, rs6000_promote_function_mode,
	rs6000_must_pass_in_stack, is_complex_IBM_long_double,
	abi_v4_pass_in_fpr, rs6000_function_arg_padding,
	rs6000_function_arg_boundary, rs6000_parm_offset,
	rs6000_parm_start, rs6000_arg_size,
	rs6000_darwin64_record_arg_advance_flush,
	rs6000_darwin64_record_arg_advance_recurse,
	rs6000_darwin64_struct_check_p, rs6000_function_arg_advance_1,
	rs6000_function_arg_advance, rs6000_darwin64_record_arg_flush,
	rs6000_darwin64_record_arg_recurse, rs6000_darwin64_record_arg,
	rs6000_mixed_function_arg, rs6000_psave_function_arg,
	rs6000_finish_function_arg, rs6000_function_arg,
	rs6000_arg_partial_bytes, rs6000_pass_by_reference,
	rs6000_parm_needs_stack, rs6000_function_parms_need_stack,
	rs6000_reg_parm_stack_space, rs6000_move_block_from_reg,
	setup_incoming_varargs, rs6000_build_builtin_va_list, rs6000_va_start,
	rs6000_gimplify_va_arg, def_builtin, bdesc_3arg, bdesc_dst,
	bdesc_2arg, bdesc_altivec_preds, bdesc_abs, bdesc_1arg, bdesc_0arg,
	bdesc_htm, rs6000_overloaded_builtin_p, rs6000_overloaded_builtin_name,
	rs6000_expand_zeroop_builtin, rs6000_expand_mtfsf_builtin,
	rs6000_expand_mtfsb_builtin, rs6000_expand_set_fpscr_rn_builtin,
	rs6000_expand_set_fpscr_drn_builtin, rs6000_expand_unop_builtin,
	altivec_expand_abs_builtin, rs6000_expand_binop_builtin,
	altivec_expand_predicate_builtin, swap_endian_selector_for_mode,
	altivec_expand_lv_builtin, altivec_expand_stxvl_builtin,
	altivec_expand_stv_builtin, htm_spr_num, rs6000_htm_spr_icode,
	htm_expand_builtin, cpu_expand_builtin, rs6000_expand_ternop_builtin,
	altivec_expand_dst_builtin, altivec_expand_vec_init_builtin,
	get_element_number, altivec_expand_vec_set_builtin,
	altivec_expand_vec_ext_builtin, altivec_expand_builtin,
	rs6000_builtin_is_supported_p, rs6000_invalid_builtin,
	rs6000_fold_builtin, rs6000_builtin_valid_without_lhs,
	fold_build_vec_cmp, fold_compare_helper, fold_mergehl_helper,
	fold_mergeeo_helper, rs6000_gimple_fold_builtin,
	rs6000_expand_builtin, rs6000_vector_type,
	rs6000_init_builtins, rs6000_builtin_decl, altivec_init_builtins,
	htm_init_builtins, builtin_function_type, rs6000_common_init_builtins,
	rs6000_internal_arg_pointer, rs6000_output_mi_thunk: Move
	to here from rs6000.c.
	* config/rs6000/rs6000-internal.h: (rs6000_darwin64_struct_check_p,
	rs6000_discover_homogeneous_aggregate, rs6000_output_mi_thunk,
	rs6000_output_addr_const_extra, rs6000_gimple_fold_builtin,
	rs6000_invalid_builtin, rs6000_build_builtin_va_list, rs6000_va_start,
	rs6000_gimplify_va_arg, rs6000_promote_function_mode,
	rs6000_return_in_memory, rs6000_return_in_msb,
	rs6000_pass_by_reference, setup_incoming_varargs,
	rs6000_function_arg_boundary, rs6000_must_pass_in_stack,
	rs6000_arg_partial_bytes, rs6000_function_arg_advance,
	rs6000_function_arg_padding, rs6000_function_arg,
	rs6000_darwin64_record_arg, rs6000_internal_arg_pointer,
	rs6000_init_builtins, rs6000_builtin_decl, rs6000_expand_builtin,
	rs6000_fold_builtin, rs6000_passes_ieee128, rs6000_passes_float,
	rs6000_passes_long_double, rs6000_passes_vector,
	rs6000_returns_struct, cpu_builtin_p, tree builtin_mode_to_type,
	altivec_builtin_mask_for_load) Add declarations.
	* config/rs6000/t-rs6000: Add new source file rs6000-call.c.
	* config/config.gcc: Add new source file rs6000-call.c to garbage
	collector and extra_objs.

From-SVN: r273607

	* tree-ssa-dse.c (initialize_ao_ref_for_dse): Handle
	strncpy.  Drop some trivial dead code.
	(maybe_trim_memstar_call): Handle strncpy.

	* gcc.dg/tree-ssa/ssa-dse-37.c: New test.
	* gcc.dg/tree-ssa/ssa-dse-38.c: New test.

From-SVN: r273606

re PR tree-optimization/91211 (wrong code with __builtin_memset() and __builtin_memcpy() at -O1 and above)

2019-07-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91211
	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): Fix
	memset encoding size.

	* gcc.dg/torture/pr91211.c: New testcase.

From-SVN: r273605

	PR target/91204
	* config/i386/mmx.md (one_cmpl<mode>2): New expander.

From-SVN: r273604

	PR ipa/91194
	* ipa-inline.c (recursive_inlining): Fix limits check.

From-SVN: r273603

2019-07-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91200
	* tree-ssa-phiopt.c (cond_store_replacement): Check we have
	no PHI nodes in middle-bb.

	* gcc.dg/torture/pr91200.c: New testcase.

From-SVN: r273602

After some discussion, we've decided to rename the +bitperm feature
flag to +sve2-bitperm, so that it's consistent with the other SVE2
feature flags.  The associated macro was already
__ARM_FEATURE_SVE2_BITPERM, so only the feature flag itself
needs to change.

2019-07-19  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
	* doc/invoke.texi: Rename the AArch64 +bitperm extension flag
	to +sve-bitperm.
	* config/aarch64/aarch64-option-extensions.def: Likewise.

From-SVN: r273600

	PR middle-end/91190
	* function.c (insert_temp_slot_address): Store into the hash table
	a copy of address to avoid RTL sharing issues.

	* gcc.c-torture/compile/pr91190.c: New test.

From-SVN: r273599

From-SVN: r273598

2019-07-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91207
	Revert
	2019-07-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91178
	* tree-vect-stmts.c (get_group_load_store_type): For SLP
	loads with a gap larger than the vector size always use
	VMAT_STRIDED_SLP.
	(vectorizable_load): For VMAT_STRIDED_SLP with a permutation
	avoid loading vectors that are only contained in the gap
	and thus are not needed.

	* gcc.dg/torture/pr91207.c: New testcase.

From-SVN: r273593

We shouldn't complain that a dependent type is incomplete.

	* pt.c (invalid_nontype_parm_type_p): Check for dependent class type.

From-SVN: r273592

A non-type template parameter of class type used in an expression has
const-qualified type; the pt.c hunks deal with this difference from the
unqualified type of the parameter declaration.  WAhen we use such a
parameter as an argument to another template, we don't want to confuse
things by copying it, we should pass it straight through.  And we might as
well skip copying other classes in constant evaluation context in a
template, too; we'll get the copy semantics at instantiation time.

	PR c++/90099
	PR c++/90101
	* call.c (build_converted_constant_expr_internal): Don't copy.
	* pt.c (process_partial_specialization): Allow VIEW_CONVERT_EXPR
	around class non-type parameter.
	(unify) [TEMPLATE_PARM_INDEX]: Ignore cv-quals.

From-SVN: r273591

From-SVN: r273590

2019-07-18  François Dumont  <fdumont@gcc.gnu.org>

	* include/bits/stl_tempbuf.h (__detail::__return_temporary_buffer): New.
	(~_Temporary_buffer()): Use latter.
	(_Temporary_buffer(_FIterator, size_type)): Likewise.

From-SVN: r273586