2014-09-18  Olivier Hainque  <hainque@adacore.com>

gcc/
	* config.gcc (powerpc-wrs-vxworksmils): New configuration.
	* config/rs6000/t-vxworksmils: New file.
	* config/rs6000/vxworksmils.h: New file.

libgcc/
	* config.host (powerpc-wrs-vxworksmils): New configuration,
	same as vxworksae.

contrib/
	* config-list.mk (LIST): Add powerpc-wrs-vxworksmils.

From-SVN: r215377

This patch removes the (undocumented) LIBGCC2_TF_CEXT target macro,
replacing it by -fbuilding-libgcc predefines (and thereby gets rid of
another LIBGCC2_LONG_DOUBLE_TYPE_SIZE conditional, though some more
patches are needed before that target macro can be eliminated).  This
macro indicated the suffix used on __builtin_huge_val,
__builtin_copysign, __builtin_fabs built-in function names to produce
the names for a given floating-point mode.

Predefines are added for all floating-point modes supported for
libgcc, not just TFmode.  These are fully accurate for modes
corresponding to float, double and long double.  For other modes, the
suffix for *constants* is determined by the targetm.c.mode_for_suffix
hook (the limit to two possible suffixes 'w' and 'q' being hardcoded
in various places).  This is in fact the suffix for built-in functions
as well where such functions exist.

* For i386, the *q functions always exist (whether or not TFmode is
  used for long double).  The *w functions never exist (but this
  doesn't matter for libgcc, since no i386 configuration treats XFmode
  as a supported scalar mode if long double is TFmode; if __float80
  were to be supported for 64-bit Android, properly such functions
  ought to be added).

* For ia64, the *q functions exist for non-HP-UX (under HP-UX, long
  double is TFmode, so they aren't needed).  The *w functions never
  exist.  This is an issue for this libgcc code for the XFmode complex
  functions in libgcc on HP-UX; as I understand it, right now those
  will accidentally be using TFmode versions of those three functions,
  so involving unnecessary conversions, while the sanity check on CEXT
  accidentally passes because all it tests is the sizes of the types.

Because of the lack of 'w' functions, the patch uses 'l' when the
constant suffix is 'w', matching what the existing libgcc code would
do for IA64 HP-UX in that case.

Ideally there would be generic code to create such built-in functions
for all supported floating-point types.  That may be something to
consider if support for TS 18661-3 (standard bindings for IEEE
754-2008, defining names such as _Float128, and function names such as
copysignf128) is added in future.

Bootstrapped with no regressions on x86_64-unknown-linux-gnu.

gcc:
	* system.h (LIBGCC2_TF_CEXT): Poison.
	* config/i386/cygming.h (LIBGCC2_TF_CEXT): Remove.
	* config/i386/darwin.h (LIBGCC2_TF_CEXT): Likewise.
	* config/i386/dragonfly.h (LIBGCC2_TF_CEXT): Likewise.
	* config/i386/freebsd.h (LIBGCC2_TF_CEXT): Likewise.
	* config/i386/gnu-user-common.h (LIBGCC2_TF_CEXT): Likewise.
	* config/i386/openbsdelf.h (LIBGCC2_TF_CEXT): Likewise.
	* config/i386/sol2.h (LIBGCC2_TF_CEXT): Likewise.
	* config/ia64/ia64.h (LIBGCC2_TF_CEXT): Likewise.
	* config/ia64/linux.h (LIBGCC2_TF_CEXT): Likewise.

gcc/c-family:
	* c-cppbuiltin.c (c_cpp_builtins): Define __LIBGCC_*_FUNC_EXT__
	for supported floating-point modes.

libgcc:
	* libgcc2.c (CEXT): Define using __LIBGCC_*_FUNC_EXT__.

From-SVN: r215368

The i386 sfp-machine.h defines FP_TRAPPING_EXCEPTIONS in a way that is
always wrong: it treats a set bit as indicating the exception is
trapping, when actually a set bit (both for 387 and SSE floating
point) indicates it is masked, and a clear bit indicates it is
trapping.  This patch fixes this bug.

Bootstrapped with no regressions on x86_64-unknown-linux-gnu.

libgcc:
	* config/i386/sfp-machine.h (FP_TRAPPING_EXCEPTIONS): Treat clear
	bits not set bits as indicating trapping exceptions.

gcc/testsuite:
	* gcc.dg/torture/float128-exact-underflow.c: New test.

From-SVN: r215347

	* Makefile.in (LIBGCOV_INTERFACE): Add _gcov_dump from ...
	(LIBGCOV_DRIVER): ... here.
	* libgcov-driver.c (gcov_master): New.
	(gcov_exit): Remove from master chain.
	(__gcov_init): Add to master chain if version compatible.  Don't
	clear the version.
	* libgcov_interface (__gcov_flust): Call gcov_dump_int.
	(gcov_reset_int): Clear master chain, if compatible.
	(gcov_dump_int): New internal interface.  Dump master chain, if
	compatible.
	(gcov_dump): Alias for gcov_dump_int.
	* libgcov.h (struct gcov_root): Add next and prev fields.
	(struct gcov_master): New struct.
	(__gcov_master): New.
	(gcov_dump_int): Declare.

From-SVN: r215337

config.host (x86_64-*-mingw*): Add i386/t-cygming to tmake_file and crtbegin.o + crtend.o to extra_parts.

2014-09-17  Olivier Hainque  <hainque@adacore.com>

        * config.host (x86_64-*-mingw*): Add i386/t-cygming to tmake_file
        and crtbegin.o + crtend.o to extra_parts.

From-SVN: r215323

This patch removes the LIBGCC2_HAS_{SF,DF,XF,TF}_MODE target macros,
replacing them by predefines with -fbuilding-libgcc, together with a
target hook that can influence those predefines when needed.

The new default is that a floating-point mode is supported in libgcc
if (a) it passes the scalar_mode_supported_p hook (otherwise it's not
plausible for it to be supported in libgcc) and (b) it's one of those
four modes (since those are the modes for which libgcc hardcodes the
possibility of support).  The target hook can override the default
choice (in either direction) for modes that pass
scalar_mode_supported_p (although overriding in the direction of
returning true when the default would return false only makes sense if
all relevant functions are specially defined in libgcc for that
particular target).

The previous default settings depended on various settings such as
LIBGCC2_LONG_DOUBLE_TYPE_SIZE, as well as targets defining the above
target macros if the default wasn't correct.

The default scalar_mode_supported_p only declares a floating-point
mode to be supported if it matches one of float / double / long
double.  This means that in most cases where a mode is only supported
conditionally in libgcc (TFmode only supported if it's the mode of
long double, most commonly), the default gets things right.  Overrides
were needed in the following cases:

* SFmode would always have been supported in libgcc (the condition was
  BITS_PER_UNIT == 8, true for all current targets), but pdp11
  defaults to 64-bit float, and in that case SFmode would fail
  scalar_mode_supported_p.  I don't know if libgcc actually built for
  pdp11 (and the port may well no longer be being used), but this
  patch adds a scalar_mode_supported_p hook to it to ensure SFmode is
  treated as supported.

* Certain i386 and ia64 targets need the new hook to match the
  existing cases for when XFmode or TFmode support is present in
  libgcc.  For i386, the hook can always declare XFmode to be
  supported - the cases where it's not are the cases where long double
  is TFmode, in which case XFmode fails scalar_mode_supported_p[*] -
  but TFmode support needs to be conditional.  (And of the targets not
  defining LIBGCC2_HAS_TF_MODE before this patch, some defined
  LONG_DOUBLE_TYPE_SIZE to 64, so ensuring LIBGCC2_HAS_TF_MODE would
  always be false, while others did not define it, so allowing it to
  be true in the -mlong-double-128 case.  This patch matches that
  logic, although I suspect all the latter targets would have been
  broken if you tried to enable -mlong-double-128 by default, for lack
  of the soft-fp TFmode support in libgcc, which is separately
  configured.)

  [*] I don't know if it's deliberate not to support __float80 at all
  with -mlong-double-128.

In order to implement the default version of the new hook,
insn-modes.h was made to contain macros such as HAVE_TFmode for each
machine mode, so the default hook can contain conditionals on whether
XFmode and TFmode exist (to match the hardcoding of a list of modes in
libgcc).  This is also used in fortran/trans-types.c; previously it
had a conditional on defined(LIBGCC2_HAS_TF_MODE) (a bit dubious,
since it ignored the value of the macro), which is replaced by testing
defined(HAVE_TFmode), in conjunction with requiring
targetm.libgcc_floating_mode_supported_p.

(Fortran is testing something stronger than that hook: not only is
libgcc support required, but also libm or equivalent.  Thus, it has a
test for ENABLE_LIBQUADMATH_SUPPORT in the case that the mode is
TFmode and that's not the same as any of the three standard types.
The old and new tests are intended to accept exactly the same set of
modes for all targets.)

Apart from the four target macros eliminated by this patch, it gets us
closer to eliminating LIBGCC2_LONG_DOUBLE_TYPE_SIZE as well, though a
few more places using that macro need changing first.

Bootstrapped with no regressions on x86_64-unknown-linux-gnu; also
built cc1 for crosses to ia64-elf and pdp11-none as a minimal test of
changes for those targets.

gcc:
	* target.def (libgcc_floating_mode_supported_p): New hook.
	* targhooks.c (default_libgcc_floating_mode_supported_p): New
	function.
	* targhooks.h (default_libgcc_floating_mode_supported_p): Declare.
	* doc/tm.texi.in (LIBGCC2_HAS_DF_MODE, LIBGCC2_HAS_XF_MODE)
	(LIBGCC2_HAS_TF_MODE): Remove.
	(TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P): New @hook.
	* doc/tm.texi: Regenerate.
	* genmodes.c (emit_insn_modes_h): Define HAVE_%smode for each
	machine mode.
	* system.h (LIBGCC2_HAS_SF_MODE, LIBGCC2_HAS_DF_MODE)
	(LIBGCC2_HAS_XF_MODE, LIBGCC2_HAS_TF_MODE): Poison.
	* config/i386/cygming.h (LIBGCC2_HAS_TF_MODE): Remove.
	* config/i386/darwin.h (LIBGCC2_HAS_TF_MODE): Remove.
	* config/i386/djgpp.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
	* config/i386/dragonfly.h (LIBGCC2_HAS_TF_MODE): Remove.
	* config/i386/freebsd.h (LIBGCC2_HAS_TF_MODE): Remove.
	* config/i386/gnu-user-common.h (LIBGCC2_HAS_TF_MODE): Remove.
	* config/i386/i386-interix.h (IX86_NO_LIBGCC_TFMODE): Define.
	* config/i386/i386.c (ix86_libgcc_floating_mode_supported_p): New
	function.
	(TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P): Define.
	* config/i386/i386elf.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
	* config/i386/lynx.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
	* config/i386/netbsd-elf.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
	* config/i386/netbsd64.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
	* config/i386/nto.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
	* config/i386/openbsd.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
	* config/i386/openbsdelf.h (LIBGCC2_HAS_TF_MODE): Remove.
	* config/i386/rtemself.h (IX86_NO_LIBGCC_TFMODE): Define.
	* config/i386/sol2.h (LIBGCC2_HAS_TF_MODE): Remove.
	* config/i386/vx-common.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
	* config/ia64/elf.h (IA64_NO_LIBGCC_TFMODE): Define.
	* config/ia64/freebsd.h (IA64_NO_LIBGCC_TFMODE): Define.
	* config/ia64/hpux.h (LIBGCC2_HAS_XF_MODE, LIBGCC2_HAS_TF_MODE):
	Remove.
	* config/ia64/ia64.c (TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P):
	New macro.
	(ia64_libgcc_floating_mode_supported_p): New function.
	* config/ia64/linux.h (LIBGCC2_HAS_TF_MODE): Remove.
	* config/ia64/vms.h (IA64_NO_LIBGCC_XFMODE)
	(IA64_NO_LIBGCC_TFMODE): Define.
	* config/msp430/msp430.h (LIBGCC2_HAS_DF_MODE): Remove.
	* config/pdp11/pdp11.c (TARGET_SCALAR_MODE_SUPPORTED_P): New
	macro.
	(pdp11_scalar_mode_supported_p): New function.
	* config/rl78/rl78.h (LIBGCC2_HAS_DF_MODE): Remove.
	* config/rx/rx.h (LIBGCC2_HAS_DF_MODE): Remove.

gcc/c-family:
	* c-cppbuiltin.c (c_cpp_builtins): Define __LIBGCC_HAS_%s_MODE__
	macros for floating-point modes.

gcc/fortran:
	* trans-types.c (gfc_init_kinds): Check
	targetm.libgcc_floating_mode_supported_p for floating-point
	modes.  Check HAVE_TFmode instead of LIBGCC2_HAS_TF_MODE.

libgcc:
	* libgcc2.h (LIBGCC2_HAS_SF_MODE): Define using
	__LIBGCC_HAS_SF_MODE__.
	(LIBGCC2_HAS_DF_MODE): Define using __LIBGCC_HAS_DF_MODE__.
	(LIBGCC2_HAS_XF_MODE): Define using __LIBGCC_HAS_XF_MODE__.
	(LIBGCC2_HAS_TF_MODE): Define using __LIBGCC_HAS_TF_MODE__.
	* config/libbid/bid_gcc_intrinsics.h
	(LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Do not define.
	(LIBGCC2_HAS_XF_MODE): Define using __LIBGCC_HAS_XF_MODE__.
	(LIBGCC2_HAS_TF_MODE): Define using __LIBGCC_HAS_TF_MODE__.
	* fixed-bit.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Do not define.
	(LIBGCC2_HAS_SF_MODE): Define using __LIBGCC_HAS_SF_MODE__.
	(LIBGCC2_HAS_DF_MODE): Define using __LIBGCC_HAS_DF_MODE__.

From-SVN: r215215

gcc/
	PR target/63223
	* config/avr/avr.md (*tablejump.3byte-pc): New insn.
	(*tablejump): Restrict to !AVR_HAVE_EIJMP_EICALL.  Add void clobber.
	(casesi): Expand to *tablejump.3byte-pc if AVR_HAVE_EIJMP_EICALL.
libgcc/
	PR target/63223
	* config/avr/libgcc.S (__tablejump2__): Rewrite to use RAMPZ, ELPM
	and R24 as needed.  Make work for all devices and .text locations.
	(__do_global_ctors, __do_global_dtors): Use word addresses.
	(__tablejump__, __tablejump_elpm__): Remove functions.
	* t-avr (LIB1ASMFUNCS): Remove _tablejump, _tablejump_elpm.
	Add _tablejump2.
	(XICALL, XIJMP): New macros.

From-SVN: r215152

gcc/Changelog

2014-09-09  Marcus Shawcroft  <marcus.shawcroft@arm.com>
            Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

     * config/aarch64/aarch64-elf-raw.h (ENDFILE_SPEC): Add crtfastmath.o.
     * config/aarch64/aarch64-linux.h (GNU_USER_TARGET_MATH_ENDFILE_SPEC): Define.
      (ENDFILE_SPEC): Define and use GNU_USER_TARGET_MATH_ENDFILE_SPEC.

libgcc/Changelog

2014-09-09  Marcus Shawcroft  <marcus.shawcroft@arm.com>
            Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

    * config.host (aarch64*): Include crtfastmath and t-crtfm.
    * config/aarch64/crtfastmath.c: New file. 

Co-Authored-By: Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>

From-SVN: r215086

contrib/ChangeLog:

2014-09-08  Trevor Saunders  <tsaunders@mozilla.com>

	* compare-all-tests: Don't test picochip.
	* config-list.mk: Likewise.

gcc/ChangeLog:

2014-09-08  Trevor Saunders  <tsaunders@mozilla.com>

	* common/config/picochip/picochip-common.c: Remove.
	* config.gcc: Remove support for picochip.
	* config/picochip/constraints.md: Remove.
	* config/picochip/dfa_space.md: Remove.
	* config/picochip/dfa_speed.md: Remove.
	* config/picochip/picochip-protos.h: Remove.
	* config/picochip/picochip.c: Remove.
	* config/picochip/picochip.h: Remove.
	* config/picochip/picochip.md: Remove.
	* config/picochip/picochip.opt: Remove.
	* config/picochip/predicates.md: Remove.
	* config/picochip/t-picochip: Remove.
	* doc/md.texi: Don't document picochi.

libgcc/ChangeLog:

2014-09-08  Trevor Saunders  <tsaunders@mozilla.com>

	* config.host: Remove picochip support.
	* config/picochip/adddi3.S: Remove.
	* config/picochip/ashlsi3.S: Remove.
	* config/picochip/ashlsi3.c: Remove.
	* config/picochip/ashrsi3.S: Remove.
	* config/picochip/ashrsi3.c: Remove.
	* config/picochip/clzsi2.S: Remove.
	* config/picochip/cmpsi2.S: Remove.
	* config/picochip/divmod15.S: Remove.
	* config/picochip/divmodhi4.S: Remove.
	* config/picochip/divmodsi4.S: Remove.
	* config/picochip/lib1funcs.S: Remove.
	* config/picochip/longjmp.S: Remove.
	* config/picochip/lshrsi3.S: Remove.
	* config/picochip/lshrsi3.c: Remove.
	* config/picochip/parityhi2.S: Remove.
	* config/picochip/popcounthi2.S: Remove.
	* config/picochip/setjmp.S: Remove.
	* config/picochip/subdi3.S: Remove.
	* config/picochip/t-picochip: Remove.
	* config/picochip/ucmpsi2.S: Remove.
	* config/picochip/udivmodhi4.S: Remove.
	* config/picochip/udivmodsi4.S: Remove.

From-SVN: r215039

gcc:
	* config/i386/cygming.h (TF_SIZE): Remove.
	* config/i386/darwin.h (TF_SIZE): Remove.
	* config/i386/dragonfly.h (TF_SIZE): Remove.
	* config/i386/freebsd.h (TF_SIZE): Remove.
	* config/i386/gnu-user-common.h (TF_SIZE): Remove.
	* config/i386/openbsdelf.h (TF_SIZE): Remove.
	* config/i386/sol2.h (TF_SIZE): Remove.
	* config/ia64/hpux.h (XF_SIZE, TF_SIZE): Remove.
	* config/ia64/linux.h (TF_SIZE): Remove.
	* doc/tm.texi.in (SF_SIZE, DF_SIZE, XF_SIZE, TF_SIZE): Remove.
	* doc/tm.texi: Regenerate.
	* system.h (SF_SIZE, DF_SIZE, XF_SIZE, TF_SIZE): Poison.

gcc/c-family:
	* c-cppbuiltin.c (c_cpp_builtins): Define macros for mantissa
	digits of floating-point modes if -fbuilding-libgcc.

libgcc:
	* libgcc2.c (SF_SIZE): Change all uses to __LIBGCC_SF_MANT_DIG__.
	(DF_SIZE): Change all uses to __LIBGCC_DF_MANT_DIG__.
	(XF_SIZE): Change all uses to __LIBGCC_XF_MANT_DIG__.
	(TF_SIZE): Change all uses to __LIBGCC_TF_MANT_DIG__.
	* libgcc2.h (SF_SIZE): Change to __LIBGCC_SF_MANT_DIG__.  Give
	error if not defined and LIBGCC2_HAS_SF_MODE is defined.
	(DF_SIZE): Change to __LIBGCC_DF_MANT_DIG__.  Give error if not
	defined and LIBGCC2_HAS_DF_MODE is defined.
	(XF_SIZE): Change to __LIBGCC_XF_MANT_DIG__.  Give error if not
	defined and LIBGCC2_HAS_XF_MODE is defined.
	(TF_SIZE): Change to __LIBGCC_TF_MANT_DIG__.  Give error if not
	defined and LIBGCC2_HAS_TF_MODE is defined.

From-SVN: r215014

gcc:
	* defaults.h (LARGEST_EXPONENT_IS_NORMAL, ROUND_TOWARDS_ZERO):
	Remove.
	* doc/tm.texi.in (ROUND_TOWARDS_ZERO, LARGEST_EXPONENT_IS_NORMAL):
	Remove.
	* doc/tm.texi: Regenerate.
	* system.h (LARGEST_EXPONENT_IS_NORMAL, ROUND_TOWARDS_ZERO):
	Poison.
	* config/arm/arm.h (LARGEST_EXPONENT_IS_NORMAL): Remove.
	* config/cris/cris.h (__make_dp): Remove.

libgcc:
	* fp-bit.c (pack_d, unpack_d): Remove LARGEST_EXPONENT_IS_NORMAL
	and ROUND_TOWARDS_ZERO conditionals.

From-SVN: r215013

	* libgcov-interface.c (STRONG_ALIAS): Rename to ...
	(ALIAS_weak): ... here. Use forwarding function.  Adjust uses.

From-SVN: r215005

gcc/c-family:
	* c-cppbuiltin.c (c_cpp_builtins): Also define
	__LIBGCC_EH_TABLES_CAN_BE_READ_ONLY__,
	__LIBGCC_EH_FRAME_SECTION_NAME__, __LIBGCC_JCR_SECTION_NAME__,
	__LIBGCC_CTORS_SECTION_ASM_OP__, __LIBGCC_DTORS_SECTION_ASM_OP__,
	__LIBGCC_TEXT_SECTION_ASM_OP__, __LIBGCC_INIT_SECTION_ASM_OP__,
	__LIBGCC_INIT_ARRAY_SECTION_ASM_OP__,
	__LIBGCC_STACK_GROWS_DOWNWARD__,
	__LIBGCC_DONT_USE_BUILTIN_SETJMP__,
	__LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__,
	__LIBGCC_DWARF_FRAME_REGISTERS__,
	__LIBGCC_EH_RETURN_STACKADJ_RTX__, __LIBGCC_JMP_BUF_SIZE__,
	__LIBGCC_STACK_POINTER_REGNUM__ and
	__LIBGCC_VTABLE_USES_DESCRIPTORS__ for -fbuilding-libgcc.
	(builtin_define_with_value): Handle backslash-escaping in string
	macro values.

libgcc:
	* Makefile.in (CRTSTUFF_CFLAGS): Add -fbuilding-libgcc.
	* config/aarch64/linux-unwind.h (STACK_POINTER_REGNUM): Change all
	uses to __LIBGCC_STACK_POINTER_REGNUM__.
	(DWARF_ALT_FRAME_RETURN_COLUMN): Change all uses to
	__LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
	* config/alpha/vms-unwind.h (DWARF_ALT_FRAME_RETURN_COLUMN):
	Change use to __LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
	* config/cr16/unwind-cr16.c (STACK_GROWS_DOWNWARD): Change all
	uses to __LIBGCC_STACK_GROWS_DOWNWARD__.
	(DWARF_FRAME_REGISTERS): Change all uses to
	__LIBGCC_DWARF_FRAME_REGISTERS__.
	(EH_RETURN_STACKADJ_RTX): Change all uses to
	__LIBGCC_EH_RETURN_STACKADJ_RTX__.
	* config/cr16/unwind-dw2.h (DWARF_FRAME_REGISTERS): Change use to
	__LIBGCC_DWARF_FRAME_REGISTERS__.  Remove conditional definition.
	* config/i386/cygming-crtbegin.c (EH_FRAME_SECTION_NAME): Change
	use to __LIBGCC_EH_FRAME_SECTION_NAME__.
	(JCR_SECTION_NAME): Change use to __LIBGCC_JCR_SECTION_NAME__.
	* config/i386/cygming-crtend.c (EH_FRAME_SECTION_NAME): Change use
	to __LIBGCC_EH_FRAME_SECTION_NAME__.
	(JCR_SECTION_NAME): Change use to __LIBGCC_JCR_SECTION_NAME__
	* config/mips/linux-unwind.h (STACK_POINTER_REGNUM): Change use to
	__LIBGCC_STACK_POINTER_REGNUM__.
	(DWARF_ALT_FRAME_RETURN_COLUMN): Change all uses to
	__LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
	* config/nios2/linux-unwind.h (STACK_POINTER_REGNUM): Change use
	to __LIBGCC_STACK_POINTER_REGNUM__.
	* config/pa/hpux-unwind.h (DWARF_ALT_FRAME_RETURN_COLUMN): Change
	all uses to __LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
	* config/pa/linux-unwind.h (DWARF_ALT_FRAME_RETURN_COLUMN): Change
	all uses to __LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
	* config/rs6000/aix-unwind.h (DWARF_ALT_FRAME_RETURN_COLUMN):
	Change all uses to __LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
	(STACK_POINTER_REGNUM): Change all uses to
	__LIBGCC_STACK_POINTER_REGNUM__.
	* config/rs6000/darwin-fallback.c (STACK_POINTER_REGNUM): Change
	use to __LIBGCC_STACK_POINTER_REGNUM__.
	* config/rs6000/linux-unwind.h (STACK_POINTER_REGNUM): Change all
	uses to __LIBGCC_STACK_POINTER_REGNUM__.
	* config/sparc/linux-unwind.h (DWARF_FRAME_REGISTERS): Change use
	to __LIBGCC_DWARF_FRAME_REGISTERS__.
	* config/sparc/sol2-unwind.h (DWARF_FRAME_REGISTERS): Change use
	to __LIBGCC_DWARF_FRAME_REGISTERS__.
	* config/tilepro/linux-unwind.h (STACK_POINTER_REGNUM): Change use
	to __LIBGCC_STACK_POINTER_REGNUM__.
	* config/xtensa/unwind-dw2-xtensa.h (DWARF_FRAME_REGISTERS):
	Remove conditional definition.
	* crtstuff.c (TEXT_SECTION_ASM_OP): Change all uses to
	__LIBGCC_TEXT_SECTION_ASM_OP__.
	(EH_FRAME_SECTION_NAME): Change all uses to
	__LIBGCC_EH_FRAME_SECTION_NAME__.
	(EH_TABLES_CAN_BE_READ_ONLY): Change all uses to
	__LIBGCC_EH_TABLES_CAN_BE_READ_ONLY__.
	(CTORS_SECTION_ASM_OP): Change all uses to
	__LIBGCC_CTORS_SECTION_ASM_OP__.
	(DTORS_SECTION_ASM_OP): Change all uses to
	__LIBGCC_DTORS_SECTION_ASM_OP__.
	(JCR_SECTION_NAME): Change all uses to
	__LIBGCC_JCR_SECTION_NAME__.
	(INIT_SECTION_ASM_OP): Change all uses to
	__LIBGCC_INIT_SECTION_ASM_OP__.
	(INIT_ARRAY_SECTION_ASM_OP): Change all uses to
	__LIBGCC_INIT_ARRAY_SECTION_ASM_OP__.
	* generic-morestack.c (STACK_GROWS_DOWNWARD): Change all uses to
	__LIBGCC_STACK_GROWS_DOWNWARD__.
	* libgcc2.c (INIT_SECTION_ASM_OP): Change all uses to
	__LIBGCC_INIT_SECTION_ASM_OP__.
	(INIT_ARRAY_SECTION_ASM_OP): Change all uses to
	__LIBGCC_INIT_ARRAY_SECTION_ASM_OP__.
	(EH_FRAME_SECTION_NAME): Change all uses to
	__LIBGCC_EH_FRAME_SECTION_NAME__.
	* libgcov-profiler.c (VTABLE_USES_DESCRIPTORS): Remove conditional
	definitions.  Change all uses to
	__LIBGCC_VTABLE_USES_DESCRIPTORS__.
	* unwind-dw2.c (STACK_GROWS_DOWNWARD): Change all uses to
	__LIBGCC_STACK_GROWS_DOWNWARD__.
	(DWARF_FRAME_REGISTERS): Change all uses to
	__LIBGCC_DWARF_FRAME_REGISTERS__.
	(EH_RETURN_STACKADJ_RTX): Change all uses to
	__LIBGCC_EH_RETURN_STACKADJ_RTX__.
	* unwind-dw2.h (DWARF_FRAME_REGISTERS): Remove conditional
	definition.  Change use to __LIBGCC_DWARF_FRAME_REGISTERS__.
	* unwind-sjlj.c (DONT_USE_BUILTIN_SETJMP): Change all uses to
	__LIBGCC_DONT_USE_BUILTIN_SETJMP__.
	(JMP_BUF_SIZE): Change use to __LIBGCC_JMP_BUF_SIZE__.

From-SVN: r214954

	* libgcov-interface.c (STRONG_ALIAS): New.
	(__gcov_flush): Call __gcov_reset_int.
	(__gcov_reset): Strong alias for ...
	(__gcov_reset_ing): ... this renamed hidden version.
	* libgcov.h (__gcov_reset_int): New declaration.

From-SVN: r214840

2014-08-19  Yaakov Selkowitz  <yselkowi@redhat.com>

	* config/i386/cygming-crtend.c (register_frame_ctor): Move atexit
	call from here...
	* config/i386/cygming-crtbegin.c (__gcc_register_frame): to here.
	(__dso_handle): Define on Cygwin.
	* config/i386/t-cygming (crtbeginS.o): New rule.
	* config.host (*-*-cygwin*): Add crtbeginS.o to extra_parts.

From-SVN: r214162

2014-08-19  Yaakov Selkowitz  <yselkowi@redhat.com>

        * config/i386/cygming-crtbegin.c (deregister_frame_fn): Fix
        declaration syntax.

From-SVN: r214153

2014-08-13  Steve Ellcey  <sellcey@mips.com>

	* crtstuff.c: Undef caddr_t.

From-SVN: r213931

2014-08-12  Steve Ellcey  <sellcey@mips.com>

	* config/mips/mips16.S:  Skip when __mips_soft_float is defined.

From-SVN: r213870

	* Makefile.in (LIBGCOV_INTERFACE): Move _gcov_dump ...
	(LIBGCOV_DRIVER): ... to here.
	* libgcov.h (gcov_do_dump): New #define.
	(struct gcov_root): New.
	(__gcov_root): New declaration.
	(__gcov_dump_one): Declare.
	* libgcov-driver.c (gcov_list, gcov_dump_complete,
	run_accounted): Delete.
	(gcov_compute_histogram): Add LIST argument, adjust.
	(compute_summary): Adjust gcov_compute_histogram call.
	(gcov_do_dump): Not hidden, static in libgcov.
	(gcov_clear): Move  to interface.c.
	(__gcov_dump_one): New, broken out of ...
	(gcov_exit): ... here.  Make static.
	(__gcov_root): New.
	(__gcov_init): Adjust.
	* libgcov-interface.c (gcov_clear, gcov_exit): Remove
	declarations.
	(__gcov_flush): Use __gcov_dump_one and __gcov_reset.
	(gcov_clear): Moved from driver.c.   Add LIST argument.
	(__gcov_reset): Adjust for changed interfaces.
	(__gcov_fork): Remove local declaration of __gcov_flush_mx.

From-SVN: r213719

From-SVN: r213640

	PR target/60102

[libgcc]
2014-07-31  Rohit  <rohitarulraj@freescale.com>
	* config/rs6000/linux-unwind.h (ppc_fallback_frame_state): Update
	  based on change in SPE high register numbers and 3 HTM registers.

[gcc]
2014-07-31  Rohit  <rohitarulraj@freescale.com>
	* config/rs6000/rs6000.c
	  (rs6000_reg_names) : Add SPE high register names.
	  (alt_reg_names) : Likewise.
	  (rs6000_dwarf_register_span) : For SPE high registers, replace
	  dwarf register numbers with GCC hard register numbers.
	  (rs6000_init_dwarf_reg_sizes_extra) : Likewise.
	  (rs6000_dbx_register_number): For SPE high registers, return dwarf
	  register number for the corresponding GCC hard register number.

	* config/rs6000/rs6000.h
	  (FIRST_PSEUDO_REGISTER) : Update based on 32 newly added GCC hard
	  register numbers for SPE high registers.
	  (DWARF_FRAME_REGISTERS) :  Likewise.
	  (DWARF_REG_TO_UNWIND_COLUMN) : Likewise.
	  (DWARF_FRAME_REGNUM) : Likewise.
	  (FIXED_REGISTERS) : Likewise.
	  (CALL_USED_REGISTERS) : Likewise.
	  (CALL_REALLY_USED_REGISTERS) : Likewise.
	  (REG_ALLOC_ORDER) : Likewise.
	  (enum reg_class) : Likewise.
	  (REG_CLASS_NAMES) : Likewise.
	  (REG_CLASS_CONTENTS) : Likewise.
	  (SPE_HIGH_REGNO_P) : New macro to identify SPE high registers.	

	* gcc.target/powerpc/pr60102.c: New testcase.

From-SVN: r213596

	* Makefile.in (LIBGCOV_MERGE, LIBGCOV_PROFILER,
	LIBGCOV_INTERFACE): Reformat.
	* libgcov-driver.c (gcov_exit, __gcov_init): Disable when
	IN_GCOV_TOOL.
	* libgcov-interface.c: Reformat some comments.
	(__gcov_flush_mx): Add declaration.  Tidy up definition.

From-SVN: r213442

	* config/rs6000/ibm-ldouble.c (typedef union longDblUnion): Delete.
	(pack_ldouble): New function.
	(__gcc_qadd): Use it.
	(__gcc_qmul): Likewise.
	(__gcc_qdiv): Likewise.
	(__gcc_qneg): Likewise.
	(__gcc_stoq): Likewise.
	(__gcc_dtoq): Likewise.

Co-Authored-By: Peter Bergner <bergner@vnet.ibm.com>

From-SVN: r213380

s390.c (s390_emit_tpf_eh_return): Pass original return address as second parameter to __tpf_eh_return routine.

gcc/

2014-07-30  Ulrich Weigand  <Ulrich.Weigand@de.ibm.com>

	* config/s390/s390.c (s390_emit_tpf_eh_return): Pass original return
	address as second parameter to __tpf_eh_return routine.

libgcc/

2014-07-30  J. D. Johnston  <jjohnst@us.ibm.com>

	* config/s390/tpf-unwind.h: Include <stdbool.h>.
	(__tpf_eh_return): Add original return address as second parameter.
	Handle cases where unwinder routines were called directly, instead
	of from within the C++ library.

From-SVN: r213305

	libgcc/
	* libgcov.h: Move renaming of entry points to lib gcov specific
	portion.
	(gcov_do_dump): New rename.
	(gcov_rewrite): Remove inline, make HIDDEN.
	* libgcov-driver.c (gcov_clear, gcov_exit): Remove declarations.
	(gcov_exit_compute_summary): Rename to ...
	(compute_summary): ... here.  Add LIST argument.
	(gcov_exit_merge_gcda): Rename to ...
	(merge_one_data): ... here.
	(gcov_exit_write_gcda): Rename to ...
	(write_one_data): ... here.
	(gcov_exit_merge_summary): Rename to ...
	(merge_summary): Add RUN_COUNTED argument.
	(gcov_exit_dump_gcov): Rename to ...
	(dump_one_gcov): Add RUN_COUNTED argument.
	(gcov_do_dump): New function, broken out of ...
	(gcov_exit): ... here.  Call it.

	gcc/
	* gcov-io.c (gcov_var): Make hidden.
	* gcov-tool.c (gcov_list, gcov_exit): Remove declarations.
	(gcov_do_dump): Declare.
	(gcov_output_files): Call gcov_do_dump, not gcov_exit).

From-SVN: r213188

From-SVN: r213108

From-SVN: r213098

	* libgcov-driver.c (struct gcov_filename_aux): Rename ...
	(struct gcov_filename): ... here.  Include buffer and max length
	fields.
	(gcov_max_filename): Remove.
	(gi_filename): Remove.
	(gcov_exit_compute_summary): Compute max filename here.
	(gcov_exit_merge_gcda): Add filename parm, adjust.
	(gcov_exit_merge_summary): Likewise.
	(gcov_exit_dump_gcov): Adjust for struct gcov_filename changes.
	(gcov_exit): Likewise.
	(__gcov_init): Don't calculate max length here.
	* libgcov_util.c (max_filename_len): Remove.
	(read_gcda_file): Don't calculate max length here.
	(gcov_read_profile_dir): Don't propagate here.
	* libgcov-driver-system.c (alloc_filename_struct): Adjust for
	struct gcov_filename changes.
	(gcov_exit_open_gcda_file): Likewise.

From-SVN: r213092

libgcov-driver.c (set_gcov_dump_complete, [...]): Remove global functions polluting user's namespace.

	* libgcov-driver.c (set_gcov_dump_complete,
	reset_gcov_dump_complete, get_gcov_dump_complete): Remove global
	functions polluting user's namespace.
	(gcov_exit): Set variable directly.
	(gcov_clear): Reset variable directly.
	* libgcov-interface.c (get_gcov_dymp_complete,
	reset_gov_dump_complete): Remove declarations.
	(__gcov_reset, __gcov_dump): Don't call them.

From-SVN: r213058

* config/i386/cygming-crtbegin.c (deregister_frame_fn): Newly public.
(__gcc_deregister_frame): Move logic to detect deregister function to...
(__gcc_register_frame): here, so it's consistent with the register logic.

From-SVN: r213009

	PR libgcc/61685
	* bid128_fma.c (rounding_correction): Remove redundant tests.

From-SVN: r212942

	gcc/
	* gcov-tool.c (gcov_list): Declare here.
	(set_gcov_list): Remove.
	(gcov_output_files): Set gcov_list directly.

	libgcc/
	* libgcov-driver.c (set_gcov_list): Remove.
	(gcov_list): Make non-static in GCOV_TOOL.
	* libgcov.h (GCOV_TOOL_LINKAGE): Remove unused #define.

From-SVN: r212931

	* config/pa/linux-atomic.c (__sync_lock_release_4): New.
	(SYNC_LOCK_RELEASE): Update to use __kernel_cmpxchg for release.
	Don't use SYNC_LOCK_RELEASE for int type.

From-SVN: r212767

2014-07-14  Richard Biener  <rguenther@suse.de>

	* libgcov.h (struct gcov_fn_info): Make ctrs size 1.

From-SVN: r212520

2014-07-11  Rong Xu  <xur@google.com>

	* libgcov-util.c (gcov_max_filename): Fix declartion.

From-SVN: r212463

2014-07-10  Rong Xu  <xur@google.com>

	Add gcov-tool: an offline gcda profile processing tool
	Support.
	* gcc/gcov-io.c (gcov_position): Make avaialble to gcov-tool.
	(gcov_is_error): Ditto.
	(gcov_read_string): Ditto.
	(gcov_read_sync): Ditto.
	* gcc/gcov-io.h: Move counter defines to gcov-counter.def.
	* gcc/gcov-dump.c (tag_counters): Use gcov-counter.def.
	* gcc/coverage.c: Ditto.
	* gcc/gcov-tool.c: Offline gcda profile processing tool.
        (unlink_gcda_file): Remove one gcda file.
	(unlink_profile_dir): Remove gcda files from the profile path.
	(gcov_output_files): Output gcda files to an output dir.
	(profile_merge): Merge two profiles in directory.
	(print_merge_usage_message): Print merge usage.
	(merge_usage): Print merge usage and exit.
	(do_merge): Driver for profile merge sub-command.
	(profile_rewrite): Rewrite profile.
	(print_rewrite_usage_message): Print rewrite usage.
	(rewrite_usage): Print rewrite usage and exit.
	(do_rewrite): Driver for profile rewrite sub-command.
	(print_usage): Print gcov-info usage and exit.
	(print_version): Print gcov-info version.
	(process_args): Process arguments.
	(main): Main routine for gcov-tool.
	* gcc/Makefile.in: Build and install gcov-tool.
	* gcc/gcov-counter.def: New file split from gcov-io.h.
	* libgcc/libgcov-driver.c (gcov_max_filename): Make available
        to gcov-tool.
	* libgcc/libgcov-merge.c (__gcov_merge_add): Replace
        gcov_read_counter() with a Macro.
	(__gcov_merge_ior): Ditto.
	(__gcov_merge_time_profile): Ditto.
	(__gcov_merge_single): Ditto.
	(__gcov_merge_delta): Ditto.
	* libgcc/libgcov-util.c (void gcov_set_verbose): Set the verbose flag
        in the utility functions.
	(set_fn_ctrs): Utility function for reading gcda files to in-memory
        gcov_list object link lists.
	(tag_function): Ditto.
	(tag_blocks): Ditto.
	(tag_arcs): Ditto.
	(tag_lines): Ditto.
	(tag_counters): Ditto.
	(tag_summary): Ditto.
	(read_gcda_finalize): Ditto.
	(read_gcda_file): Ditto.
	(ftw_read_file): Ditto.
	(read_profile_dir_init): Ditto.
	(gcov_read_profile_dir): Ditto.
	(gcov_read_counter_mem): Ditto.
	(gcov_get_merge_weight): Ditto.
	(merge_wrapper): A wrapper function that calls merging handler.
	(gcov_merge): Merge two gcov_info objects with weights.
	(find_match_gcov_info): Find the matched gcov_info in the list.
	(gcov_profile_merge): Merge two gcov_info object lists.
	(__gcov_add_counter_op): Process edge profile counter values.
	(__gcov_ior_counter_op): Process IOR profile counter values.
	(__gcov_delta_counter_op): Process delta profile counter values.
	(__gcov_single_counter_op): Process single  profile counter values.
	(fp_scale): Callback function for float-point scaling.
	(int_scale): Callback function for integer fraction scaling. 
	(gcov_profile_scale): Scaling profile counters.
	(gcov_profile_normalize): Normalize profile counters.
	* libgcc/libgcov.h: Add headers and functions for gcov-tool use.
        (gcov_get_counter): New.
        (gcov_get_counter_target): Ditto.
        (struct gcov_info): Make the functions field mutable in gcov-tool
        compilation.
	* gcc/doc/gcc.texi: Include gcov-tool.texi.
	* gcc/doc/gcov-tool.texi: Document for gcov-tool.

From-SVN: r212448

	PR libgcc/61585
	* unwind-seh.c (_Unwind_GetGR): Check for proper
	index range.
	(_Unwind_SetGR): Likewise.

From-SVN: r211900

2014-06-18  Charles Baylis  <charles.baylis@linaro.org>

	* config/arm/bpabi.c (__gnu_uldivmod_helper): Remove.

From-SVN: r211797

2014-06-18  Charles Baylis  <charles.baylis@linaro.org>

	* config/arm/bpabi-v6m.S (__aeabi_uldivmod): Perform division using
	__udivmoddi4.

From-SVN: r211796

2014-06-18  Charles Baylis  <charles.baylis@linaro.org>

	* config/arm/bpabi.S (__aeabi_ldivmod, __aeabi_uldivmod,
	push_for_divide, pop_for_divide): Use .cfi_* directives for DWARF
	annotations. Fix DWARF information.

From-SVN: r211795