larith.asm (L_regs_frame): New for _.frame.

	* config/m68hc11/larith.asm (L_regs_frame): New for _.frame.
	Put the soft registers in bss for 68HC12.
	(L_regs_d3_4): New for _.d3 and _.d4.
	(L_regs_d5_6): Likewise.
	(L_regs_d1_2): Likewise.
	* config/m68hc11/t-m68hc11-gas (T_CPPFLAGS): Compile new parts.

From-SVN: r41846

gcc/ChangeLog

 2001-05-04  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 
+	* config/m68hc11/larith.asm (L_regs_frame): New for _.frame.
+	Put the soft registers in bss for 68HC12.
+	(L_regs_d3_4): New for _.d3 and _.d4.
+	(L_regs_d5_6): Likewise.
+	(L_regs_d1_2): Likewise.
+	* config/m68hc11/t-m68hc11-gas (T_CPPFLAGS): Compile new parts.	
+
+2001-05-04  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
+
 	* config/m68hc11/m68hc11.h (CPP_SPEC): Pass -D__HAVE_SHORT_DOUBLE__
 	to the pre-processor when -fshort-double is specified.
 	* config/m68hc11/m68hc11.2 (CPP_SPEC): Likewise.

gcc/config/m68hc11/larith.asm

@@ -52,38 +52,69 @@ NAME:	.word 0;			\
 #else
 	.sect .page0
 #endif
-	.globl _.tmp,_.frame
+	.globl _.tmp
 	.globl _.z,_.xy
 REG(_.tmp)
 REG(_.z)
 REG(_.xy)
-REG(_.frame)
 
 #endif
 
-#ifdef L_regs_d1_8
-/* Pseudo hard registers used by gcc.
-   They must be located in page0. 
-   They will normally appear at the end of .page0 section.  */
+#ifdef L_regs_frame
 #ifdef mc68hc12
 	.sect .bss
 #else
 	.sect .page0
 #endif
-	.globl _.d1,_.d2,_.d3,_.d4,_.d5,_.d6
-	.globl _.d7,_.d8
+	.globl _.frame
+REG(_.frame)
+#endif
+
+#ifdef L_regs_d1_2
+#ifdef mc68hc12
+	.sect .bss
+#else
+	.sect .page0
+#endif
+	.globl _.d1,_.d2
 REG(_.d1)
 REG(_.d2)
+#endif
+
+#ifdef L_regs_d3_4
+#ifdef mc68hc12
+	.sect .bss
+#else
+	.sect .page0
+#endif
+	.globl _.d3,_.d4
 REG(_.d3)
 REG(_.d4)
+#endif
+
+#ifdef L_regs_d5_6
+#ifdef mc68hc12
+	.sect .bss
+#else
+	.sect .page0
+#endif
+	.globl _.d5,_.d6
 REG(_.d5)
 REG(_.d6)
+#endif
+
+#ifdef L_regs_d7_8
+#ifdef mc68hc12
+	.sect .bss
+#else
+	.sect .page0
+#endif
+	.globl _.d7,_.d8
 REG(_.d7)
 REG(_.d8)
-
 #endif
 
-#ifdef L_regs_d8_16
+#ifdef L_regs_d9_16
 /* Pseudo hard registers used by gcc.
    They must be located in page0. 
    They will normally appear at the end of .page0 section.  */

gcc/config/m68hc11/t-m68hc11-gas

@@ -21,7 +21,8 @@ LIB1ASMFUNCS = _mulsi3 \
 	_mulqi3 _ashlsi3 _ashrsi3 _lshrsi3 \
 	_divmodhi4 _mulhi3 _mulhi32 \
 	_memcpy _memset _negsi2 _one_cmplsi2 \
-	_regs_min _regs_d1_8 _regs_d8_16 _regs_d17_32 \
+	_regs_min _regs_frame _regs_d1_2 \
+	_regs_d3_4 _regs_d5_6 _regs_d7_8 _regs_d9_16 _regs_d17_32 \
 	_premain __exit _abort _cleanup \
 	_adddi3 _subdi3 _notdi2 \
 	_ashrhi3 _lshrhi3 _lshlhi3 _ashrqi3 _lshlqi3 _map_data _init_bss