Skip to content

M
macroplacement
Commit 6b4fe784 by sakundu
Options

Updated MemPool tile sdc 

Signed-off-by: sakundu <sakundu@ucsd.edu>
parent 1ff0c6d0
Showing with 4 additions and 3 deletions
.gitignore
Flows/*/*/run/*/
Flows/job
Flows/ASAP7/mempool_tile/constraints/mempool_tile_wrap.sdc
......@@ -1299,4 +1299,4 @@ set_clock_uncertainty -setup 0.08 [get_clocks clk_i]
set_clock_uncertainty -hold 0.08 [get_clocks clk_i]
set_clock_latency 0.07 [get_clocks vclk_i]
## List of unsupported SDC commands ##
set_critical_range 0.100 [current_design]
#set_critical_range 0.100 [current_design]
Flows/NanGate45/mempool_tile/constraints/mempool_tile_wrap.sdc
......@@ -56,4 +56,4 @@ set_input_delay [expr 0.30*$clock_cycle] -clock vclk_i rst_ni
# Critical range
# Depending on the synthesis tool used, this can be helpful.
set_critical_range 0.100 [current_design]
#set_critical_range 0.100 [current_design]
Flows/SKY130HD/mempool_tile/constraints/mempool_tile_wrap.sdc
......@@ -56,4 +56,4 @@ set_input_delay [expr 0.30*$clock_cycle] -clock vclk_i rst_ni
# Critical range
# Depending on the synthesis tool used, this can be helpful.
set_critical_range 0.100 [current_design]
#set_critical_range 0.100 [current_design]
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment