The parameters of the `git_pkt_parse_line` function are quite confusing.
First, there is no real indicator what the `out` parameter is actually
all about, and it's not really clear what the `bufflen` parameter refers
to. Reorder and rename the parameters to make this more obvious.

When checking whether an "unpack" packet returned the "ok" status or
not, we use a call to `git__prefixcmp`. In case where the passed line
isn't properly NUL terminated, though, this may overrun the line buffer.
Fix this by using `git__prefixncmp` instead.

When parsing "ng" packets, we blindly assume that the character
immediately following the "ng" prefix is a space and skip it. As the
calling function doesn't make sure that this is the case, we can thus
end up blindly accepting an invalid packet line.

Fix the issue by using `git__prefixncmp`, checking whether the line
starts with "ng ".

There are two different buffer overflows present when parsing "ok"
packets. First, we never verify whether the line already ends after
"ok", but directly go ahead and also try to skip the expected space
after "ok". Second, we then go ahead and use `strchr` to scan for the
terminating newline character. But in case where the line isn't
terminated correctly, this can overflow the line buffer.

Fix the issues by using `git__prefixncmp` to check for the "ok " prefix
and only checking for a trailing '\n' instead of using `memchr`. This
also fixes the issue of us always requiring a trailing '\n'.

Reported by oss-fuzz, issue 9749:

Crash Type: Heap-buffer-overflow READ {*}
Crash Address: 0x6310000389c0
Crash State:
  ok_pkt
  git_pkt_parse_line
  git_smart__store_refs

Sanitizer: address (ASAN)

We are being quite lenient when parsing "ACK" packets. First, we didn't
correctly verify that we're not overrunning the provided buffer length,
which we fix here by using `git__prefixncmp` instead of
`git__prefixcmp`. Second, we do not verify that the actual contents make
any sense at all, as we simply ignore errors when parsing the ACKs OID
and any unknown status strings. This may result in a parsed packet
structure with invalid contents, which is being silently passed to the
caller. This is being fixed by performing proper input validation and
checking of return codes.

While the function parsing ref packets doesn't have any immediately
obvious buffer overflows, it's style is different to all the other
parsing functions. Instead of checking buffer length while we go, it
does a check up-front. This causes the code to seem a lot more magical
than it really is due to some magic constants. Refactor the function to
instead make use of the style of other packet parser and verify buffer
lengths as we go.

In the `git_pkt_parse_line` function, we determine what kind of packet
a given packet line contains by simply checking for the prefix of that
line. Except for "ERR" packets, we always only check for the immediate
identifier without the trailing space (e.g. we check for an "ACK"
prefix, not for "ACK "). But for "ERR" packets, we do in fact include
the trailing space in our check. This is not really much of a problem at
all, but it is inconsistent with all the other packet types and thus
causes confusion when the `err_pkt` function just immediately skips the
space without checking whether it overflows the line buffer.

Adjust the check in `git_pkt_parse_line` to not include the trailing
space and instead move it into `err_pkt` for consistency.

When parsing data, progress or error packets, we need to copy the
contents of the rest of the current packet line into the flex-array of
the parsed packet. To keep track of this array's length, we then assign
the remaining length of the packet line to the structure. We do have a
mismatch of types here, as the structure's `len` field is a signed
integer, while the length that we are assigning has type `size_t`.

On nearly all platforms, this shouldn't pose any problems at all. The
line length can at most be 16^4, as the line's length is being encoded
by exactly four hex digits. But on a platforms with 16 bit integers,
this assignment could cause an overflow. While such platforms will
probably only exist in the embedded ecosystem, we still want to avoid
this potential overflow. Thus, we now simply change the structure's
`len` member to be of type `size_t` to avoid any integer promotion.

When we parse the packet type of an incoming packet line, we do not
verify that we don't overflow the provided line buffer. Fix this by
using `git__prefixncmp` instead and passing in `len`. As we have
previously already verified that `len <= linelen`, we thus won't ever
overflow the provided buffer length.

The commits following this commit are about to introduce quite a lot of
refactoring and tightening of the smart packet parser. Unfortunately, we
do not yet have any tests despite our online tests that verify that our
parser does not regress upon changes. This is doubly unfortunate as our
online tests aren't executed by default.

Add new tests that exercise the smart parsing logic directly by
executing `git_pkt_parse_line`.

CI: refactoring

Don't stop on test failures; run all the tests, even when a test fails.

Similar to the way we parse the ctest output on POSIX systems, do the
same on Windows.  This allows us to append the `-r` flag to clar after
we've identified the command to run.

In-memory configuration

Now that we have abstracted away how to store and retrieve config
entries, it became trivial to implement a new in-memory backend by
making use of this. And thus we do so.

This commit implements a new read-only in-memory backend that can parse
a chunk of memory into a `git_config_backend` structure.

Right now, the config file code requires us to pass in its backend to
the config entry iterator. This is required with the current code, as
the config file backend will first create a read-only snapshot which is
then passed to the iterator just for that purpose. So after the iterator
is getting free'd, the code needs to make sure that the snapshot gets
free'd, as well.

By now, though, we can easily refactor the code to be more efficient and
remove the reverse dependency from iterator to backend. Instead of
creating a read-only snapshot (which also requires us to re-parse the
complete configuration file), we can simply duplicate the config entries
and pass those to the iterator. Like that, the iterator only needs to
make sure to free the duplicated config entries, which is trivial to do
and clears up memory ownership by a lot.

Access to the config entries is now completely done via the modules
function interface and no caller messes with the struct's internals. We
can thus completely move the structure declarations into the
implementation file so that nobody even has a chance to mess with the
members.

Instead of directly calling `git_atomic_inc` in users of the config
entries store, provide a `git_config_entries_incref` function to further
decouple the interfaces. Convert the refcount to a `git_refcount`
structure while at it.

The nice thing about our `git_config_iterator` interfaces is that nobody
needs to know anything about the implementation details. All that is
required is to obtain the iterator via any backend and then use it by
executing generic functions. We can thus completely internalize all the
implementation details of how to iterate over entries into the config
entries store and simply create such an iterator in our config file
backend when we want to iterate its entries. This further decouples the
config file backend from the config entries store.

The code accessing config entries in the `git_config_entries` structure
is still much too intimate with implementation details, directly
accessing the maps and handling indices. Provide two new functions to
get config entries from the internal map structure to decouple the
interfaces and use them in the config file code.

The function `git_config_entries_get` will simply look up the entry by
name and, in the case of a multi-value, return the last occurrence of
that entry. The second function, `git_config_entries_get_unique`, will
only return an entry if it is unique and not included via another
configuration file. This one is required to properly implement write
operations for single entries, as we refuse to write to or delete a
single entry if it is not clear which one was meant.

The previous commit simply moved all code that is required to handle
config entries to a new module without yet adjusting any of the function
and structure names to help readability. We now rename things
accordingly to have a common "git_config_entries" entries instead of the
old "diskfile_entries" one.

The configuration entry store that is used for configuration files needs
to keep track of all entries in two different structures:

- a singly linked list is being used to be able to iterate through
  configuration files in the order they have been found

- a string map is being used to efficiently look up configuration
  entries by their key

This store is thus something that may be used by other, future backends
as well to abstract away implementation details and iteration over the
entries.

Pull out the necessary functions from "config_file.c" and moves them
into their own "config_entries.c" module. For now, this is simply moving
over code without any renames and/or refactorings to help reviewing.

The implementation for config file snapshots has an unnecessary
redirection from `config_snapshot` to `git_config_file__snapshot`.
Inline the call to `git_config_file__snapshot` and remove it.

The header "config_file.h" has a list of inline-functions to access the
contents of a config backend without directly messing with the struct's
function pointers. While all these functions are called
"git_config_file_*", they are in fact completely backend-agnostic and
don't care whether it is a file or not. Rename all the function to
instead be backend-agnostic versions called "git_config_backend_*" and
rename the header to match.

The function `git_config_file_normalize_section` is never being used in
any file different than "config.c", but it is implemented in
"config_file.c". Move it over and make the symbol static.

As a last step to make variables and structures more backend agnostic
for our `git_config` structure, rename local variables to not be called
`file` anymore.

Some warnings

index: release the snapshot instead of freeing the index

"warning: values of type 'OSStatus' should not be used as format arguments; add an explicit cast to 'int' instead [-Wformat]"

online::clone: free url and username before resetting

Before resetting the url and username, ensure that we free them in case
they were set by environment variables.

git_remote_prune to be O(n  * logn)

Same as with the previous commit, the `file_internal` struct is used to
keep track of all the backends that are added to a `git_config` struct.
Rename it to `backend_internal` and rename its `file` member to
`backend` to make the implementation more backend-agnostic.

Originally, the `git_config` struct is a collection of all the parsed
configuration files from different scopes (system-wide config,
user-specific config as well as the repo-specific config files).
Historically, we didn't and don't yet have any other configuration
backends than the one for files, which is why the field holding the
config backends is called `files`. But in fact, nothing dictates that
the vector of backends actually holds file backends only, as they are
generic and custom backends can be implemented by users.

Rename the member to be called `backends` to clarify that there is
nothing specific to files here.

The variables `git_config_escaped` and `git_config_escapes` are both
defined as static const character pointers in "config_parse.h". In case
where "config_parse.h" is included but those two variables are not being
used, the compiler will thus complain about defined but unused
variables. Fix this by declaring them as external and moving the actual
initialization to the C file.

Note that it is not possible to simply make this a #define, as we are
indexing into those arrays.

When populating the list of submodule names, we use the submodule
configuration entry's name as the key in the map of submodule names.
This creates a hidden dependency on the liveliness of the configuration
that was used to parse the submodule, which is fragile and unexpected.

Fix the issue by duplicating the string before writing it into the
submodule name map.

Rename "VSTS" to "Azure DevOps" and "Azure Pipelines"