[gcc]
2013-10-03 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/rs6000-builtin.def (XSRDPIM): Use floatdf2,
ceildf2, btruncdf2, instead of vsx_* name.
* config/rs6000/vsx.md (vsx_add<mode>3): Change arithmetic
iterators to only do V2DF and V4SF here. Move the DF code to
rs6000.md where it is combined with SF mode. Replace <VSv> with
just 'v' since only vector operations are handled with these insns
after moving the DF support to rs6000.md.
(vsx_sub<mode>3): Likewise.
(vsx_mul<mode>3): Likewise.
(vsx_div<mode>3): Likewise.
(vsx_fre<mode>2): Likewise.
(vsx_neg<mode>2): Likewise.
(vsx_abs<mode>2): Likewise.
(vsx_nabs<mode>2): Likewise.
(vsx_smax<mode>3): Likewise.
(vsx_smin<mode>3): Likewise.
(vsx_sqrt<mode>2): Likewise.
(vsx_rsqrte<mode>2): Likewise.
(vsx_fms<mode>4): Likewise.
(vsx_nfma<mode>4): Likewise.
(vsx_copysign<mode>3): Likewise.
(vsx_btrunc<mode>2): Likewise.
(vsx_floor<mode>2): Likewise.
(vsx_ceil<mode>2): Likewise.
(vsx_smaxsf3): Delete scalar ops that were moved to rs6000.md.
(vsx_sminsf3): Likewise.
(vsx_fmadf4): Likewise.
(vsx_fmsdf4): Likewise.
(vsx_nfmadf4): Likewise.
(vsx_nfmsdf4): Likewise.
(vsx_cmpdf_internal1): Likewise.
* config/rs6000/rs6000.h (TARGET_SF_SPE): Define macros to make it
simpler to select whether a target has SPE or traditional floating
point support in iterators.
(TARGET_DF_SPE): Likewise.
(TARGET_SF_FPR): Likewise.
(TARGET_DF_FPR): Likewise.
(TARGET_SF_INSN): Macros to say whether floating point support
exists for a given operation for expanders.
(TARGET_DF_INSN): Likewise.
* config/rs6000/rs6000.c (Ftrad): New mode attributes to allow
combining of SF/DF mode operations, using both traditional and VSX
registers.
(Fvsx): Likewise.
(Ff): Likewise.
(Fv): Likewise.
(Fs): Likewise.
(Ffre): Likewise.
(FFRE): Likewise.
(abs<mode>2): Combine SF/DF modes using traditional floating point
instructions. Add support for using the upper DF registers with
VSX support, and SF registers with power8-vector support. Update
expanders for operations supported by both the SPE and traditional
floating point units.
(abs<mode>2_fpr): Likewise.
(nabs<mode>2): Likewise.
(nabs<mode>2_fpr): Likewise.
(neg<mode>2): Likewise.
(neg<mode>2_fpr): Likewise.
(add<mode>3): Likewise.
(add<mode>3_fpr): Likewise.
(sub<mode>3): Likewise.
(sub<mode>3_fpr): Likewise.
(mul<mode>3): Likewise.
(mul<mode>3_fpr): Likewise.
(div<mode>3): Likewise.
(div<mode>3_fpr): Likewise.
(sqrt<mode>3): Likewise.
(sqrt<mode>3_fpr): Likewise.
(fre<Fs>): Likewise.
(rsqrt<mode>2): Likewise.
(cmp<mode>_fpr): Likewise.
(smax<mode>3): Likewise.
(smin<mode>3): Likewise.
(smax<mode>3_vsx): Likewise.
(smin<mode>3_vsx): Likewise.
(negsf2): Delete SF operations that are merged with DF.
(abssf2): Likewise.
(addsf3): Likewise.
(subsf3): Likewise.
(mulsf3): Likewise.
(divsf3): Likewise.
(fres): Likewise.
(fmasf4_fpr): Likewise.
(fmssf4_fpr): Likewise.
(nfmasf4_fpr): Likewise.
(nfmssf4_fpr): Likewise.
(sqrtsf2): Likewise.
(rsqrtsf_internal1): Likewise.
(smaxsf3): Likewise.
(sminsf3): Likewise.
(cmpsf_internal1): Likewise.
(copysign<mode>3_fcpsgn): Add VSX/power8-vector support.
(negdf2): Delete DF operations that are merged with SF.
(absdf2): Likewise.
(nabsdf2): Likewise.
(adddf3): Likewise.
(subdf3): Likewise.
(muldf3): Likewise.
(divdf3): Likewise.
(fred): Likewise.
(rsqrtdf_internal1): Likewise.
(fmadf4_fpr): Likewise.
(fmsdf4_fpr): Likewise.
(nfmadf4_fpr): Likewise.
(nfmsdf4_fpr): Likewise.
(sqrtdf2): Likewise.
(smaxdf3): Likewise.
(smindf3): Likewise.
(cmpdf_internal1): Likewise.
(lrint<mode>di2): Use TARGET_<MODE>_FPR macro.
(btrunc<mode>2): Delete separate expander, and combine with the
insn and add VSX instruction support. Use TARGET_<MODE>_FPR.
(btrunc<mode>2_fpr): Likewise.
(ceil<mode>2): Likewise.
(ceil<mode>2_fpr): Likewise.
(floor<mode>2): Likewise.
(floor<mode>2_fpr): Likewise.
(fma<mode>4_fpr): Combine SF and DF fused multiply/add support.
Add support for using the upper registers with VSX and
power8-vector. Move insns to be closer to the define_expands. On
VSX systems, prefer the traditional form of FMA over the VSX
version, since the traditional form allows the target not to
overlap with the inputs.
(fms<mode>4_fpr): Likewise.
(nfma<mode>4_fpr): Likewise.
(nfms<mode>4_fpr): Likewise.
[gcc/testsuite]
2013-10-03 Michael Meissner <meissner@linux.vnet.ibm.com>
* gcc.target/powerpc/p8vector-fp.c: New test for floating point
scalar operations when using -mupper-regs-sf and -mupper-regs-df.
* gcc.target/powerpc/ppc-target-1.c: Update tests to allow either
VSX scalar operations or the traditional floating point form of
the instruction.
* gcc.target/powerpc/ppc-target-2.c: Likewise.
* gcc.target/powerpc/recip-3.c: Likewise.
* gcc.target/powerpc/recip-5.c: Likewise.
* gcc.target/powerpc/pr72747.c: Likewise.
* gcc.target/powerpc/vsx-builtin-3.c: Likewise.
From-SVN: r203162
