* alias.c (set_mem_alias_set): New function.
	* rtl.h (set_mem_alias_set): Declare it.
	* builtins.c (expand_builtin_return_addr): Call it instead of
	using MEM_ALIAS_SET accessor.
	(expand_builtin_setjmp_setup, expand_builtin_longjmp): Likewise.
	(get_memory_rtx, expand_builtin_va_arg): Likewise.
	(expand_builtin_va_copy):Likewise.
	* caller-save.c (setup_save_areas): Likewise.
	* calls.c (compute_argument_addresses): Likewise.
	* explow.c (set_mem_attributes): Likewise.
	* expr.c (emit_single_push_insn, emit_push_insn): Likewise.
	(expand_assignment, store_constructor_field, store_field): Likewise.
	(expand_expr_unaligned): Likewise.
	* function.c (assign_stack_temp_for_type): Likewise.
	(put_reg_into_stack, gen_mem_addressof): Likewise.
	* ifcvt.c (noce_try_cmove_arith): Likewise.
	* reload1.c (reload, alter_reg): Likewise.
	* config/alpha/alpha.c (get_aligned_mem): Likewise.
	(alpha_set_memflags_1, alpha_expand_unaligned_load): Likewise.
	(alpha_expand_unaligned_store): Likewise
	(alpha_expand_unaligned_load_words): Likewise.
	(alpha_expand_unaligned_store_words): Likewise.
	(alpha_expand_block_clear, alpha_expand_prologue): Likewise.
	(alpha_expand_epilogue): Likewise.
	* config/arc/arc.c (arc_setup_incoming_varargs): Likewise.
	* config/clipper/clipper.c (clipper_builtin_saveregs): Likewise.
	* config/i386/i386.c (legitimize_pic_address): Likewise.
	* config/i960/i960.c (setup_incoming_varargs): Likewise.
	* config/ia64/ia64.c (spill_restore_mem): Likewise.
	* config/m32r/m32r.c (m32r_setup_incoming_varargs): Likewise.
	* config/m8k/m88k.c (m88k_builtin_saveregs): Likewise.
	* config/mips/mips.c (mips_va_arg): Likewise.
	* config/mn10300/mn10300.c (mn10300_builtin_saveregs): Likewise.
	* config/pa/pa.c (hppa_builtin_saveregs): Likewise.
	* config/rs6000/rs6000.c (rs6000_emit_move): Likewise.
	(setup_incoming_varargs, rs6000_va_arg): Likewise.
	(rs6000_emit_eh_toc_restore, rs6000_emit_prologue): Likewise.
	(rs6000_emit_epilogue): Likewise.
	* config/sh/sh.c (sh_builtin_saveregs): Likewise.
	* config/sparc/sparc.c (sparc_va_arg): Likewise.
	* config/v850/v850.c (v850_va_arg): Likewise.

From-SVN: r43951

2001-07-10  Jan van Male  <jan.vanmale@fenk.wau.nl>
	* regmove.c (replace_in_call_usage): Fix warnings.
	* sched-deps.c (add_dependence): Fix warnings.
	* simplify-rtx.c (simplify_subreg): Likewise.
	Return NULL_RTX instead of NULL.

	* reg-stack.c (emit_swap_insn): Eliminate warnings.
	(subst_asm_stack_regs): Likewise.

	* combine.c (num_sign_bit_copies): Cast bitwidth to int to avoid
	warnings.

	* dwarf2out.c (output_call_frame_info): Declare i as int.
	(build_abbrev_table): Declare n_alloc as int.
	(dwarf2out_finish): Initialize die.
	* except.c: Declare sjlj_funcdef_number as unsigned.
	(connect_post_landing_pads): Declare j as unsigned.
	(convert_to_eh_region_ranges): Initialize call_site.
	(output_function_exception_table): Initialize tt_format_size.
	* expr.c (move_by_pieces_1): Initialize to1.
	(store_constructor): Initialize minelt and maxelt.
	* flow.c (mark_regs_live_at_end): Declare i as unsigned.
	* function.c (instantiate_decls): Avoid signed/unsigned warning.

	* c-decl.c (combine_parm_decls): Unused, remove.
	* c-tree.h: Remove prototype for combine_parm_decls.

	* reload.c (push_reload): Fix warning.
	(regno_clobbered_p): Likewise.
	* reload1.c (replace_pseudos_in_call_usage): Likewise.
	(reload_combine): Likewise.

	* bitmap.c: Rename bitmap_zero to bitmap_zero_bits to fix warnings.
	* bitmap.h: Rename bitmap_zero to bitmap_zero_bits to fix
	warnings.
	* bitmap.c (bitmap_operation): Change user.
	* bitmap.h (EXECUTE_IF_AND_COMPL_IN_BITMAP): Likewise.
For cp/:
2001-07-10  Jan van Male  <jan.vanmale@fenk.wau.nl>

	* call.c (build_op_delete_call): Initialize fn.
	(convert_like_real): Delete conditional.
	(joust): Initialize *w and *l.
	* class.c: Add prototype for binfo_ctor_vtable.
	(get_primary_binfo): Initialize result.
	* init.c (build_java_class_ref): Initialize name.

	* typeck.c (unary_complex_lvalue): Do not duplicate the
	argument to modify, pre-, or post-increment when used as an
	lvalue and when the argument has side-effects.

For ch/:
2001-07-10  Jan van Male  <jan.vanmale@fenk.wau.nl>

	* ch-tree.h: Remove prototype for combine_parm_decls, unused
	function.

From-SVN: r43893

Mon Jul  9 06:41:07 2001  Richard Kenner  <kenner@vlsi1.ultra.nyu.edu>

	* emit-rtl.c (adjust_address_nv, replace_equiv_address_nv): New fcns.
	(operand_subword): Use them.
	(change_address_1): Renamed from change_address; new arg VALIDATE.
	* expr.h: Reflect above changes; change_address now macro.
	* alias.c (canon_rtx): Use replace_equiv_address_nv instead of
	making MEM.
	* cselib.c (add_mem_for_addr): Likewise.
	* expr.c (protect_from_queue, emit_move_insn_1): Likewise.
	* regmove.c (try_apply_stack_adjustment): Likewise.
	* reload.c (push_reload, make_memloc): Likewise.
	* reload1.c (eliminate_regs): Likewise.
	* simplify-rtx.c (simplify_replace_rtx): Likewise.
	* caller-save.c (setup_save_areas): Use adjust_address_nv instead of
	adjust_addess.
	* combine.c (make_extraction, simplify_shift_const): Likewise.
	(gen_lowpart_for_combine): Likewise.
	* cse.c (gen_lowpart_if_possible): Likewise.
	* function.c (fixup_var_refs_1, purge_addressof_1): Likewise.
	* expr.c (expand_expr, case COMPONENT_REF): Likewise.
	* optabs.c (gen_move_insn): Likewise.
	* reload1.c (alter_reg): Likewise.
	* simplify-rtx.c (simplify_subreg): Likewise.
	* stmt.c (expand_anon_union_decl): Likewise.
	* recog.c (validate_replace_rtx_1): Likewise.
	(expr.h): Include.
	* Makefile.in (recog.o): Add $(EXPR_H).
	* explow.c (stabilize): Call replace_equiv_address.
	* expr.c (move_by_pieces_1, store_by_pieces_2): Likewise.
	* final.c (alter_subreg): OFFSET is HOST_WIDE_INT.

2001-07-09  Bo Thorsen  <bo@suse.co.uk>

	* config/i386/unix.h (ASM_OUTPUT_MI_THUNK): Fix x86-64 vtable support.

2001-07-09  Neil Booth  <neil@daikokuya.demon.co.uk>

	* final.c (output_addr_const): Use target opening and
	closing parentheses.
	* target-def.h: Define TARGET_ASM_OPEN_PAREN, TARGET_ASM_CLOSE_PAREN
	defaults, add to TARGET_ASM_OUT.
	* target.h (struct gcc_target): Add open_paren and close_paren.
	* doc/md.texi: Update.
	* doc/tm.texi: Document TARGET_ASM_FUNCTION_END_PROLOGUE,
	TARGET_ASM_FUNCTION_BEGIN_EPILOGUE, TARGET_ASM_OPEN_PAREN and
	TARGET_ASM_CLOSE_PAREN.
	* config/i386/i386.c (TARGET_ASM_OPEN_PAREN, TARGET_ASM_CLOSE_PAREN):
	Override.
	* config/pdp11/pdp11.c (TARGET_ASM_OPEN_PAREN, TARGET_ASM_CLOSE_PAREN):
	Override.
	* config/1750a/1750a.h (ASM_OPEN_PAREN, ASM_CLOSE_PAREN): Remove.
	* config/a29k/a29k.h: Similarly.
	* config/alpha/alpha.h: Similarly.
	* config/arc/arc.h: Similarly.
	* config/arm/aof.h: Similarly.
	* config/arm/aout.h: Similarly.
	* config/avr/avr.h: Similarly.
	* config/c4x/c4x.h: Similarly.
	* config/clipper/clipper.h: Similarly.
	* config/convex/convex.h: Similarly.
	* config/d30v/d30v.h: Similarly.
	* config/dsp16xx/dsp16xx.h: Similarly.
	* config/elxsi/elxsi.h: Similarly.
	* config/fr30/fr30.h: Similarly.
	* config/h8300/h8300.h: Similarly.
	* config/i370/i370.h: Similarly.
	* config/i386/i386.h: Similarly.
	* config/i860/i860.h: Similarly.
	* config/i960/i960.h: Similarly.
	* config/ia64/ia64.h: Similarly.
	* config/m32r/m32r.h: Similarly.
	* config/m68hc11/m68hc11.h: Similarly.
	* config/m68k/m68k.h: Similarly.
	* config/m88k/m88k.h: Similarly.
	* config/mcore/mcore.h: Similarly.
	* config/mips/mips.h: Similarly.
	* config/mn10200/mn10200.h: Similarly.
	* config/mn10300/mn10300.h: Similarly.
	* config/ns32k/ns32k.h: Similarly.
	* config/pa/pa.h: Similarly.
	* config/pdp11/pdp11.h: Similarly.
	* config/pj/pj.h: Similarly.
	* config/romp/romp.h: Similarly.
	* config/rs6000/rs6000.h: Similarly.
	* config/sh/sh.h: Similarly.
	* config/sparc/sparc.h: Similarly.
	* config/v850/v850.h: Similarly.
	* config/vax/vax.h: Similarly.
	* config/we32k/we32k.h: Similarly.

2001-07-09  Joseph S. Myers  <jsm28@cam.ac.uk>

	* doc/c-tree.texi: Document representation of attributes.

2001-07-08  Joseph S. Myers  <jsm28@cam.ac.uk>

	* doc/tm.texi: Update some places for the rename of target to
	targetm.  Fix typo.

2001-07-08  Joseph S. Myers  <jsm28@cam.ac.uk>

	* target.h (struct gcc_target): Add insert_attributes.
	* target-def.h (TARGET_INSERT_ATTRIBUTES): Define.
	(TARGET_INITIALIZER): Update.
	* tree.c, tree.h (default_insert_attributes): New function.
	Update comments on other default functions to refer to targetm,
	not target.
	* doc/tm.texi (INSERT_ATTRIBUTES): Update to document
	TARGET_INSERT_ATTRIBUTES.
	(SET_DEFAULT_DECL_ATTRIBUTES): Remove.
	* c-common.c (decl_attributes): Use targetm.insert_attributes.
	Don't use PRAGMA_INSERT_ATTRIBUTES.
	* Makefile.in (c-common.o): Depend on $(TARGET_H).
	* c-decl.c (start_decl, start_function): Don't call
	SET_DEFAULT_DECL_ATTRIBUTES.
	* config/c4x/c4x.h (SET_DEFAULT_DECL_ATTRIBUTES): Don't define.
	* config/c4x/c4x-protos.h (c4x_set_default_attributes): Don't
	declare.
	* config/c4x/c4x.c (TARGET_INSERT_ATTRIBUTES): Define.
	(c4x_check_attribute): Avoid modifying attribute list itself.
	(c4x_set_default_attributes): Rename to c4x_insert_attributes.
	Make static.
	* config/sh/sh.h (PRAGMA_INSERT_ATTRIBUTES): Don't define.
	* config/sh/sh-protos.h (sh_pragma_insert_attributes): Don't
	declare.
	* config/sh/sh.c (TARGET_INSERT_ATTRIBUTES): Define.
	(sh_pragma_insert_attributes): Rename to sh_insert_attributes.
	Make static.
	* config/v850/v850.h (SET_DEFAULT_DECL_ATTRIBUTES): Don't define.
	* config/v850/v850-protos.h (v850_set_default_decl_attr): Don't
	declare.
	* config/v850/v850.c (TARGET_INSERT_ATTRIBUTES): Define.
	(v850_set_default_decl_attr): Rename to v850_insert_attributes.
	Adjust parameters.  Make static.

2001-07-08  Joseph S. Myers  <jsm28@cam.ac.uk>

	* c-common.c (decl_attributes): Only take a single attributes
	parameter.
	* c-common.h (decl_attributes): Update prototype.
	* c-decl.c (start_decl, start_function): Only take a single
	attributes parameter.  Update calls to decl_attributes.
	(finish_struct, finish_enum): Update calls to decl_attributes.
	(push_parm_decl): Expect unified list of attributes.  Update call
	to decl_attributes.
	* c-parse.in (fndef, initdcl, notype_initdcl, nested_function,
	notype_nested_function, component_declarator,
	component_notype_declarator, label): Update calls to
	decl_attributes.
	(absdcl_maybe_attribute, parm, firstparm, myparm): Unify attribute
	lists that are passed to push_parm_decl.
	* c-tree.h (start_function, start_decl): Update prototypes.
	* config/sh/sh-protos.h, config/sh/sh.c
	(sh_pragma_insert_attributes): Only take a single attributes
	parameter.
	* config/sh/sh.h (PRAGMA_INSERT_ATTRIBUTES): Likewise.
	* doc/tm.texi (INSERT_ATTRIBUTES): Update.
	* objc/objc-act.c (define_decl, generate_objc_symtab_decl,
	build_module_descriptor, generate_static_references,
	generate_strings, build_selector_translation_table,
	generate_descriptor_table, generate_protocols,
	generate_ivars_list, generate_dispatch_table,
	generate_protocol_list, generate_category,
	generate_shared_structures, really_start_method, add_objc_decls,
	generate_classref_translation_entry): Update calls to start_decl
	and start_function.
	(build_tmp_function_decl, start_method_def): Unify attribute lists
	that are passed to push_parm_decl.

2001-07-08  Neil Booth  <neil@daikokuya.demon.co.uk>

	* final.c (no_asm_to_stream): New.
	(final_scan_insn): Use target structures for prologue ends
	and epilogue starts.
	* output.h (no_asm_to_stream): New.
	* target-def.h (TARGET_ASM_FUNCTION_END_PROLOGUE,
	TARGET_ASM_FUNCTION_BEGIN_EPILOGUE): New.
	(TARGET_ASM_OUT): Update.
	* target.h (struct gcc_target): New members function_end_prologue
	and function_begin_epilogue.
	* config/1750/1750.h (ASM_OUTPUT_FUNNAM): Delete as unused.
	* config/alpha/alpha-protos.h (output_end_prologue): Delete.
	* config/alpha/alpha.c (output_end_prologue): Rename to
	alpha_output_function_end_prologue.  Use in target struct
	and make static.
	* config/alpha/alpha.h (FUNCTION_END_PROLOGUE): Delete.
	* config/ia64/ia64-protos.h (ia64_output_end_prologue): Delete.
	* config/ia64/ia64.c (ia64_output_end_prologue): Rename to
	ia64_output_function_end_prologue.  Use in target struct
	and make static.
	(ia64_function_prologue, ia64_funciton_epilogue): Rename
	mistyped prototypes.
	* config/ia64/ia64.h (FUNCTION_END_PROLOGUE): Delete.
	* config/m88k/m88k-protos.h (m88k_end_prologue, m88k_begin_epilogue):
	Delete.
	* config/m88k/m88k.c (m88k_end_prologue, m88k_begin_epilogue): Rename
	an use in target struct, make static.
	* config/ia64/ia64.h (FUNCTION_END_PROLOGUE, FUNCTION_BEGIN_EPILOGUE):
	Delete.

2001-07-08  Richard Henderson  <rth@redhat.com>

	* stmt.c (emit_case_nodes): Convert modes properly in low+high test.

2001-07-08  Richard Henderson  <rth@redhat.com>

	* config/i386/i386.md: Remove constraints strings from define_split
	and define_peephole2 patterns.
	(eh_return_si, eh_return_di): Split eh_return_1 for modes.
	(eh_return): Use them.

2001-07-08  Richard Henderson  <rth@redhat.com>

	* doc/tm.texi (Exception Handling): New subnode of Stack and Calling.
	Document MD_FALLBACK_FRAME_STATE_FOR.

2001-07-07  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

	* config/m68hc11/m68hc11.c (m68hc11_initial_elimination_offset):
	Take into account m68hc11_sp_correction for FRAME_POINTER_REGNUM
	elimination.
	* config/m68hc11/m68hc11.h (STARTING_FRAME_OFFSET): Use 0.

2001-07-07  Nick Clifton  <nickc@cambridge.redhat.com>

	* config/ia64/sysv4.h (ASM_OUTPUT_LABELREF): Append # to end
	of the label inside NAME as opposed to just the end of NAME.

2001-07-07  Neil Booth  <neil@daikokuya.demon.co.uk>

	* config/alpha/alpha-protos.h (vms_valid_decl_attribute_p): Delete.
	* config/alpha/alpha.c (alpha_init_machine_status,
	alpha_mark_machine_status, alpha_free_machine_status): Delete.
	(TARGET_VALID_DECL_ATTRIBUTE): Define for VMS.
	(vms_valid_decl_attribute_p): Make static, conditionally compile.
	* config/alpha/alpha.h (VALID_MACHINE_DECL_ATTRIBUTE): Delete.

2001-07-06  Stan Shebs  <shebs@apple.com>

	* target.h (targetm): Rename global from "target", so as not to
	conflict with local variables.
	* c-decl.c: Ditto.
	* c-typeck.c: Ditto.
	* final.c: Ditto.
	* tree.c: Ditto.
	* cp/decl.c: Ditto.
	* cp/decl2.c: Ditto.
	* cp/typeck.c: Ditto.
	* 1750a/1750a.c: Ditto.
	* a29k/a29k.c: Ditto.
	* arc/arc.c: Ditto.
	* arm/arm.c: Ditto.
	* avr/avr.c: Ditto.
	* clipper/clipper.c: Ditto.
	* convex/convex.c: Ditto.
	* d30v/d30v.c: Ditto.
	* dsp16xx/dsp16xx.c: Ditto.
	* elxsi/elxsi.c: Ditto.
	* fr30/fr30.c: Ditto.
	* h8300/h8300.c: Ditto.
	* i370/i370.c: Ditto.
	* i386/i386.c: Ditto.
	* i860/i860.c: Ditto.
	* i960/i960.c: Ditto.
	* ia64/ia64.c: Ditto.
	* m32r/m32r.c: Ditto.
	* m68hc11/m68hc11.c: Ditto.
	* m68k/m68k.c: Ditto.
	* m88k/m88k.c: Ditto.
	* mips/mips.c: Ditto.
	* ns32k/ns32k.c: Ditto.
	* pa/pa.c: Ditto.
	* pdp11/pdp11.c: Ditto.
	* romp/romp.c: Ditto.
	* rs6000/rs6000.c: Ditto.
	* sh/sh.c: Ditto.
	* sparc/sparc.c: Ditto.
	* vax/vax.c: Ditto.
	* we32k/we32k.c: Ditto.
	* doc/tm.texi: Update the manual to match.

2001-07-06  Richard Henderson  <rth@redhat.com>

	* except.h (MUST_USE_SJLJ_EXCEPTIONS): Examine the value of
	DWARF2_UNWIND_INFO not just whether it is defined.

2001-07-06  Diego Novillo  <dnovillo@redhat.com>

	* combine.c (combine_simplify_rtx): Also recompute 'mode' if the
	call to simplify_binary_operation returns a new pattern.

2001-07-06  Roman Lechtchinsky  <rl@cs.tu-berlin.de>

	* glimits.h (__SHRT_MAX__): New.
	(SHRT_MIN, USHRT_MAX): Define in terms of SHRT_MAX.
	(SHRT_MAX): Define in terms of __SHRT_MAX__.

2001-07-06  Jan van Male  <jan.vanmale@fenk.wau.nl>

	* alias.c (base_alias_check): Cast GET_MODE_UNIT_SIZE to int to
	avoid warnings.

2001-07-06  Richard Henderson  <rth@redhat.com>

	* bitmap.c (bitmap_release_memory): Move adjacent to the
	allocation functions.
	(bitmap_first_set_bit, bitmap_last_set_bit): Streamline knowing
	the implementation.  Binary search for the set bit.
	(bitmap_union_of_diff): Allocate the temporary on the stack
	instead of using xmalloc.

2001-07-06  Richard Henderson  <rth@redhat.com>

	* genrecog.c (validate_pattern): Warn for constraints in
	define_{expand,split,peephole2}.  Remove strict_low_part
	before looking up match_dup.

2001-07-06  DJ Delorie  <dj@redhat.com>

	* doc/gcc.texi (Makefile): Rename to be a more general purpose
	chapter about various build hints and history.  Add section
	talking about the various types of native and cross builds.

2001-07-06  Neil Booth  <neil@daikokuya.demon.co.uk>

	* Makefile.in (final.o): Depend on target.h.
	* final.c: Include target.h.
	(default_function_pro_epilogue): New.
	(final_start_function): Use target structure for function prologues.
	(final_end_function): Use target structure for function epilogues.
	* fold-const.c (real_hex_to_f): Constify s and p.
	* output.h (default_function_pro_epilogue): New.
	* real.h (real_hex_to_f): Update prototype.
	* target-def.h (TARGET_ASM_FUNCTION_PROLOGUE,
	TARGET_ASM_FUNCTION_EPILOGUE, TARGET_ASM_OUT): New.
	(TARGET_INITIALIZER): Update.
	* target.h (gcc_target): Add struct asm_out.
	* doc/tm.texi: Update.

config:
	Update each arch to use TARGET_ASM_FUNCTION_PROLOGUE and
	TARGET_ASM_FUNCTION_EPILOGUE.  Move macro code to functions
	in cpu/cpu.c, or rename old functions consistently.  Take
	a HOST_WIDE INT not an int as the SIZE parameter.  Remove now
	redundant macros and prototypes.  Make new functions static.

	* 1750a/1750a.c: Similarly.
	* 1750a/1750a.h: Similarly.
	* a29k/a29k-protos.h: Similarly.
	* a29k/a29k.c: Similarly.
	* a29k/a29k.h: Similarly.
	* arc/arc-protos.h: Similarly.
	* arc/arc.c: Similarly.
	* arc/arc.h: Similarly.
	* arm/arm-protos.h: Similarly.
	* arm/arm.c: Similarly.
	* arm/arm.h: Similarly.
	* avr/avr-protos.h: Similarly.
	* avr/avr.c: Similarly.
	* avr/avr.h: Similarly.
	* clipper/clipper-protos.h: Similarly.
	* clipper/clipper.c: Similarly.
	* clipper/clipper.h: Similarly.
	* convex/convex.c: Similarly.
	* convex/convex.h: Similarly.
	* d30v/d30v-protos.h: Similarly.
	* d30v/d30v.c: Similarly.
	* d30v/d30v.h: Similarly.
	* d30v/d30v.md: Similarly.
	* dsp16xx/dsp16xx-protos.h: Similarly.
	* dsp16xx/dsp16xx.c: Similarly.
	* dsp16xx/dsp16xx.h: Similarly.
	* elxsi/elxsi.c: Similarly.
	* elxsi/elxsi.h: Similarly.
	* fr30/fr30.c: Similarly.
	* fr30/fr30.md: Similarly.
	* h8300/h8300-protos.h: Similarly.
	* h8300/h8300.c: Similarly.
	* h8300/h8300.h: Similarly.
	* i370/i370-protos.h: Similarly.
	* i370/i370.c: Similarly.
	* i370/i370.h: Similarly.
	* i386/i386.c: Similarly.
	* i386/osf1elf.h: Similarly.
	* i386/osfrose.h: Similarly.
	* i860/i860-protos.h: Similarly.
	* i860/i860.c: Similarly.
	* i860/i860.h: Similarly.
	* i960/i960-protos.h: Similarly.
	* i960/i960.c: Similarly.
	* i960/i960.h: Similarly.
	* ia64/ia64-protos.h: Similarly.
	* ia64/ia64.c: Similarly.
	* ia64/ia64.h: Similarly.
	* m32r/m32r-protos.h: Similarly.
	* m32r/m32r.c: Similarly.
	* m32r/m32r.h: Similarly.
	* m68hc11/m68hc11-protos.h: Similarly.
	* m68hc11/m68hc11.c: Similarly.
	* m68hc11/m68hc11.h: Similarly.
	* m68k/crds.h: Similarly.
	* m68k/dpx2.h: Similarly.
	* m68k/m68k-protos.h: Similarly.
	* m68k/m68k.c: Similarly.
	* m68k/m68k.h: Similarly.
	* m68k/news.h: Similarly.
	* m88k/m88k-protos.h: Similarly.
	* m88k/m88k.c: Similarly.
	* m88k/m88k.h: Similarly.
	* mips/mips-protos.h: Similarly.
	* mips/mips.c: Similarly.
	* mips/mips.h: Similarly.
	* ns32k/merlin.h: Similarly.
	* ns32k/ns32k.c: Similarly.
	* ns32k/ns32k.h: Similarly.
	* ns32k/tek6000.h: Similarly.
	* pa/pa-protos.h: Similarly.
	* pa/pa.c: Similarly.
	* pa/pa.h: Similarly.
	* pdp11/2bsd.h: Similarly.
	* pdp11/pdp11-protos.h: Similarly.
	* pdp11/pdp11.c: Similarly.
	* pdp11/pdp11.h: Similarly.
	* romp/romp-protos.h: Similarly.
	* romp/romp.c: Similarly.
	* romp/romp.h: Similarly.
	* rs6000/rs6000-protos.h: Similarly.
	* rs6000/rs6000.c: Similarly.
	* rs6000/rs6000.h: Similarly.
	* rs6000/sysv4.h: Similarly.
	* sh/sh-protos.h: Similarly.
	* sh/sh.c: Similarly.
	* sh/sh.h: Similarly.
	* sparc/sparc-protos.h: Similarly.
	* sparc/sparc.c: Similarly.
	* sparc/sparc.h: Similarly.
	* vax/vax.c: Similarly.
	* vax/vax.h: Similarly.
	* vax/vms.h: Similarly.
	* we32k/we32k.c: Similarly.
	* we32k/we32k.h: Similarly.

Fri Jul  6 11:47:59 2001  Jeffrey A Law  (law@cygnus.com)

	* basic-block.h (first_insn_after_basic_block_note): Declare.
	* flow.c (first_insn_after_basic_block_note): Define.  Moved
	from...
	* ssa.c (first_insn_after_basic_block_note): Remove.
	* ssa-dce.c (find_inherently_necessary): Consider BARRIERs
	necessary.
	(ssa_eliminate_dead_code): Properly update the CFG and PHI
	nodes when we find a dead conditional branch.  Insert BARRIERs
	after any blocks with no successors, but which do not have
	any BARRIERs.

2001-07-06  Zack Weinberg  <zackw@stanford.edu>

	* varray.c (varray_check_failed): Use internal_error.

2001-07-05  Andrew Haley  <aph@redhat.com>

	* Makefile.in (LIB2_DIVMOD_FUNCS): New.
	(LIB2FUNCS): Move divmod functions to LIB2_DIVMOD_FUNCS.
	* mklibgcc.in: Compile LIB2_DIVMOD_FUNCS.

2001-07-02  Jason Merrill  <jason_merrill@redhat.com>

	* dwarf2out.c (mem_loc_descriptor): Only look through a constant pool
	reference if the target constant is also a SYMBOL_REF.

2001-07-05  Eric Christopher  <echristo@redhat.com>

	* config/mips/mips.h (MASK_MIPS3900): Remove.
	(MASK_MIPS16,MASK_NO_CHECK_ZERO_DIV,MASK_CHECK_RANGE_DIV,
	MASK_UNINIT_CONST_IN_RODATA): Change for 3900 mask removal.
	(TARGET_MIPS3900): Change to use mips_arch.
	(TARGET_MIPS4000): New.
	(TARGET_MIPS4100): New.
	(TARGET_MIPS4300): New.
	(TARGET_SWITCHES): Change 3900 and 4650 options to NULL.
	(SUBTARGET_TARGET_OPTIONS): Add -march. Change help text
	for -mipsX.
	(GENERATE_BRANCHLIKELY): Move TARGET_MIPS3900.
	(ISA_HAS_BRANCHLIKELY): To here.
	(CC1_CPU_SPEC):	 New.
	(CC1_SPEC): Use here.  Remove 4650 and 3900 options.
	(mips_arch_string): Declare.
	(mips_arch): Declare.
	(TARGET_OPTIONS): Add -march and -mtune.

	* config/mips/mips.c (mips_arch_string): New.
	(mips_arch): New.
	(override_options): Handle -march for codegen and -mtune
	for scheduling. Use mips_arch. Move tx39 target default here.
	(mips_parse_cpu): Move error message to override_options.

	* config/mips/r3900.h (TARGET_DEFAULT): Remove.

	* config/mips/mips.md: Use TARGET_MIPS4000 and TARGET_MIPS4300.

	* doc/invoke.texi (Option Summary): Add -march and -mtune entries.
	(MIPS Options): Ditto.	Change mcpu entry to historical text.

2001-07-05  H.J. Lu  (hjl@gnu.org)

        * config/mips/mips.c (mips_parse_cpu): New function to parse
        -march=*/-mcpu=*.

2001-07-05  Jim Wilson  <wilson@redhat.com>

	* config/ia64/lib1funcs.asm: Revert 2001-07-02 change.
	* config/ia64/t-ia64: Likewise.
	(LIB1ASMFUNCS): Update comment.

2001-07-05  David Edelsohn  <edelsohn@gnu.org>

	* doc/install.texi (Install GCC: Binaries): Fix typo.

2001-07-04  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

	* config/m68hc11/m68hc11.md ("*ashlsi3"): Operand 1 can be a memory
	reference using the stack pointer, adjust it since we push Y
	temporarily.
	("*ashrsi3"): Likewise.
	("*lshrsi3"): Likewise.

2001-07-05  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

	* config/m68hc11/m68hc11.h (RETURN_ADDR_RTX): Fix return address
	when -fomit-frame-pointer is used.

2001-07-05  Jeffrey Oldham  <oldham@codesourcery.com>

	* flow.c: Reverse Jan Hubicka's patch of 02July2001.
	(try_redirect_by_replacing_jump): Reverse updating properly the
	count and frequency information.  Reverse removing cc0 setter.
	(forwarder_block_p): Reverse fixing for fallthru blocks.

2001-07-05  DJ Delorie  <dj@redhat.com>

	* gcc.c (TARGET_OPTION_TRANSLATE_TABLE): New.
	(translate_options): If the above is defined, use it to map
	given options to new options.
	* doc/tm.texi: Document it.

2001-07-05  Brad Lucier <lucier@math.purdue.edu>
	    Gerald Pfeifer  <pfeifer@dbai.tuwien.ac.at>

	* doc/invoke.texi (Optimize Options): Document that -fgcse may
	cause programs using computed gotos to run more slowly.

2001-07-05  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>

	* doc/install.texi (Specific): Markup, spelling and typo fixes.
	Fixed sorting.
	Consistently require binutils 2.11.2, not prereleases.
	(Specific, decstation-*): Canonicalize as mips-dec-*.
	(Specific, i?86-*-sco3.2v5*): Remove make bootstrap requirement,
	always necessary.
	(Specific, m68k-altos): Removed reference to README.altos, deleted.
	(Specific, mips-*): Reword MIPS C compiler requirements.
	(Specific, powerpc*-*-*): New, mention --with-cpu once.
	(Specific, sunv5): Removed, obsolete.

2001-07-05  Nathan Sidwell  <nathan@codesourcery.com>

	* dwarf2out.c (output_loc_list): Use an all ones mask for
	.text asm output and don't rely on long long
	literals. Reformat some long lines.

2001-07-05  Andreas Jaeger  <aj@suse.de>

	* doc/gcc.texi (GNU/Linux): Remove accidental re-add of GPL
	section.

2001-07-04  Daniel Berlin  <dan@cgsoftware.com>

	* dwarf2out.c (dwarf2out_define): Update comment.
	(dwarf2out_undef): Ditto.
	(dwarf2out_start_source_file): Ditto.
	(dwarf2out_end_source_file): Ditto.
	(dwarf2out_finish): Output DW_MACINFO_end_file for primary file,
	since we never call the start/end debug hook for the primary file.

2001-07-04  Kazu Hirata  <kazu@hxi.com>

	* config/h8300/h8300.c (get_shift_alg): Remove an extra operand
	from shll.

2001-07-04  Nathan Sidwell  <nathan@codesourcery.com>

	* cppinit.c (remove_dup_dirs): Inform if a system include
        directory is being reordered.
	* doc/invoke.texi (Directory Options): GCC warns if you hide a
	system include.
	* doc/cpp.texi (Search Paths): Likewise.
	* doc/gcc.texi (Interoperation): Remove information about
	-I/usr/include.

2001-07-04  Nathan Sidwell  <nathan@codesourcery.com>

	* varray.h (VARRAY_TOP_GENERIC_PTR): Remove spurious parameter.
	(VARRAY_TOP_CHAR_PTR): Likewise.

2001-07-04  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

	* gcc.c (process_command): Don't assign elements of a const char*.

Wed Jul  4 13:40:02 2001  Richard Kenner  <kenner@vlsi1.ultra.nyu.edu>

	* emit-rtl.c (change_address): Don't abort if invalid address while
	reload is in progress.

2001-07-04  Daniel Berlin  <dan@cgsoftware.com>

	* c-lex.c (cb_file_change): Pass line number to
	debug_start_source_file.
	(cb_undefine): Pass correct line number to debug_undef.

	* toplev.c (debug_start_source_file): Add line number to
	parameters. Pass it along to dwarf2out_start_source_file.
	(decode_g_option): Stop resetting debug level back to normal when
	we change debug formats, unless the current level is
	none. (Before, -g3 -gdwarf-2 would use debug level 2, rather than
	3).

	* toplev.h (debug_start_source_file): Add line number to
	parameters.

	* dwarf2out.h (dwarf2out_start_source_file): Add line number to
	parameters.

	* dwarf2out.c (dwarf2out_start_source_file): Add line number to
	parameters.
	Output debug_macinfo data for starting file if requested.
	(dwarf2out_end_source_file): Output debug_macinfo data for ending
	file if requested.
	(dwarf2out_define): Output debug_macinfo data for defining a macro
	if requested.
	(dwarf2out_undef): Output debug_macinfo data for undefining a
	macro if requested.
	(DEBUG_MACINFO_SECTION): New. DWARF2 macro info section name.
	(DEBUG_MACINFO_SECTION_LABEL): New. DWARF2 macro info section label.
	(macinfo_section_label): New. DWARF2 macro info section label.
	(dwarf2out_init): If we want macro info, output the start label
	for the section.
	(dwarf2out_finish): If we want macro info, add a DW_AT_macro_info
	attribute to the compilation unit die pointing to the macro info.

2001-07-04  Daniel Berlin  <dan@cgsoftware.com>

	* dwarf2out.c (new_loc_list): Move to inside #ifdef
	DWARF2_DEBUGGING_INFO.
	(add_loc_descr_to_loc_list): Ditto.
	(output_loc_list): Ditto.
	Also, fix thinko in curr not being initialized.
	(gen_internal_sym): Ditto.

Wed Jul  4 13:40:02 2001  Richard Kenner  <kenner@vlsi1.ultra.nyu.edu>

	* emit-rtl.c (replace_equiv_address): New function.
	* expr.h (replace_equiv_address): New declaration.
	* explow.c (validize_mem): Call it instead of change_address and
	also call if -fforce-addr and address is constant.
	* expr.c: Replace more calls to change_address with adjust_address
	and/or replace_equiv_address or to validize_mem.
	* function.c, regmove.c, config/alpha/alpha.c: Likewise.
	* config/arm/arm.md, config/clipper/clipper.md: Likewise.
	* config/dsp16xx/dsp16xx.md, config/fr30/fr30.c: Likewise.
	* config/i370/i370.md, config/i860/i860.md: Likewise.
	* config/i960/i960.md, config/mips/mips.c: Likewise.
	* config/mips/mips.md, config/pa/pa.md: Likewise.
	* config/pdp11/pdp11.md, config/rs6000/rs6000.c: Likewise.
	* config/rs6000/rs6000.md, config/sh/sh.md: Likewise.

2001-07-04  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

	* bitmap.c (bitmap_union_of_diff): Don't use BITMAP_ALLOCA.

	* bitmap.h (BITMAP_ALLOCA): Don't pass alloca as an argument to a
	function.

2001-07-04  Joseph S. Myers  <jsm28@cam.ac.uk>

	* doc/include: New directory.
	* doc/fdl.texi: Move to doc/include/fdl.texi.
	* doc/texinfo.tex: Move to doc/include/texinfo.tex.
	* doc/include/funding.texi, doc/include/gpl.texi: New files.
	* doc/gcc.texi: Use funding.texi and gpl.texi.
	* Makefile.in ($(docdir)/cpp.info, $(docdir)/gcc.info,
	$(docdir)/cppinternals.info, cpp.dvi. gcc.dvi. cppinternals.dvi):
	Update dependencies and use -I $(docdir)/include.

2001-07-04  Anthony Green  <green@redhat.com>

	* config/v850/t-v850 (v850-c.o): Add missing dependencies.

2001-07-04  Gerald Pfeifer  <pfeifer@dbai.tuwien.ac.at>

	* doc/install.texi (sparc64-*-*): Remove garbage.

Wed Jul  4 09:07:44 2001  Jan van Male  <jan.vanmale@fenk.wau.nl>

	* i386.c (ix86_expand_builtin, case IX86_BUILTIN_SETPS):
	Fix typo in last change to use adjust_address.

2001-07-04  Gerald Pfeifer  <pfeifer@dbai.tuwien.ac.at>

	* doc/install.texi (Specific): Update information for *-*-solaris*.

Tue Jul  3 22:33:15 2001  Richard Kenner  <kenner@vlsi1.ultra.nyu.edu>

	* explow.c (plus_constant_wide): Reinitialize Y for restart.

2001-07-03  Stan Shebs  <shebs@apple.com>

	* config/darwin.h (SECTION_FUNCTION): Remove WAS_TEXT argument, remove
	case for flag_no_mach_text_sections.
	(EXTRA_SECTION_FUNCTIONS): Remove arg from uses of SECTION_FUNCTION.
	* config/darwin.c (flag_no_mach_text_sections): Remove.
	* config/darwin-protos.h (darwin_init_pragma): Remove decl.

Tue Jul  3 15:35:52 2001  Richard Kenner  <kenner@vlsi1.ultra.nyu.edu>

	* explow.c (plus_constant_wide, case PLUS): Call find_constant_term
	and avoid checking for constant as first operand.
	* recog.c (find_constant_term_loc): No longer static.
	(adj_offettable_operand): Delete.
	* rtl.h (adj_offsettable_operand): Delete declaration.
	(find_constant_term): Add declaration.
	* caller-save.c: Replace calls to adj_offsettable_operand with calls
	to adjust_address.
	* config/arm/arm.c, config/c4x/c4x.c: Likewise.
	* config/clipper/clipper.md, config/h8300/h8300.c: Likewise.
	* config/i386/i386.c, config/i386/i386.md: Likewise.
	* config/i860/i860.c, config/i960/i960.c: Likewise.
	* config/i960/i960.md, config/m68hc11/m68hc11.c: Likewise.
	* config/m68k/m68k.c, config/m68k/m68k.md: Likewise.
	* config/m88k/m88k.md, config/mcore/mcore.c: Likewise.
	* config/mips/mips.c, config/mips/mips.md: Likewise.
	* config/mn10200/mn10200.c, config/mn10300/mn10300.c: Likewise.
	* config/ns32k/ns32k.c, config/ns32k/ns32k.md: Likewise.
	* config/pa/pa.c, config/pdp11/pdp11.c: Likewise.
	* config/pdp11/pdp11.md, config/sh/sh.c, config/v850/v850.c: Likewise.
	* config/vax/vax.md, config/ns32k/ns32k.c: Likewise.
	* config/ns32k/ns32k.md: Likewise.

2001-07-03  Zack Weinberg  <zackw@stanford.edu>

	* rtl.c (copy_rtx): Handle 'T' format letter.
	* gensupport.c (collect_insn_data): Likewise.
	* print-rtl.c (print_rtx): Print 'T' slots like 's'.

2001-07-03  Nick Clifton  <nickc@cambridge.redhat.com>

	* doc/invoke.texi (Directory Options): Specifiy range for <N> in
	-B option.  Use 'dir' not 'foo' as example directory name.

2001-07-03  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>

	* config/i386/sol2.h (ASM_PREFERRED_EH_DATA_FORMAT): Define.
	Fixes PRs bootstrap/3067, bootstrap/3249, bootstrap/3275.

2001-07-03  Joseph S. Myers  <jsm28@cam.ac.uk>

	* doc/cppinternals.texi: Improve formatting and logical markup.

2001-07-03  Andreas Jaeger  <aj@suse.de>

	* Makefile.in (insn-recog.o): Add dependency on reload.h.

	* genrecog.c (write_header): Include reload.h for prototypes in
	insn-recog.c.

2001-07-03  Neil Booth  <neil@daikokuya.demon.co.uk>

config:
	* i386/cygwin.h (VALID_MACHINE_DECL_ATTRIBUTE,
	VALID_MACHINE_TYPE_ATTRIBUTE): Remove.
	* i386/i386-protos.h (i386_pe_valid_decl_attribute_p,
	i386_pe_valid_type_attribute_p): Add.
	* i386/i386.c (TARGET_INITIALIZER): Override for cygwin targets.
	* i386/winnt.c (i386_valid_decl_attribute_p): Return directly.

Mon Jul  2 21:52:19 2001  Richard Kenner  <kenner@vlsi1.ultra.nyu.edu>

	* explow.c (plus_constant_wide, case LO_SUM): New case.
	(plus_constant_for_output_wide): Delete.
	* rtl.h (plus_constant_for_output): Delete.
	* alias.c (canon_rtx, init_alias_analysis): Call plus_constant
	instead of plus_constant_for_output.
	* recog.c (offsettable_address_p, adj_offsettable_operand): Likewise.
	* config/darwin.c, config/arm/arm.c, config/m68k/m68k.c: Likewise.
	* config/m88k/m88k.c, config/mips/mips.c, config/pa/pa.c: Likewise.
	* config/rs6000/rs6000.c, config/sparc/sparc.c: Likewise.
	* config/sparc/sparc.md: Likewise.
	Convert some change_address calls to adjust_address.

2001-07-03  Joseph S. Myers  <jsm28@cam.ac.uk>

	* doc/extend.texi, doc/gcc.texi, doc/invoke.texi, doc/md.texi,
	doc/rtl.texi, doc/tm.texi: Improve formatting.  Improve
	documentation of -std and -Wwrite-strings.

2001-07-02  Geoffrey Keating  <geoffk@redhat.com>

	* cse.c (canon_hash): Don't register registers in very small
	register classes, as extending their lifetime might cause
	reload to fail.

Mon Jul  2 23:14:00 CEST 2001  Jan Hubicka  <jh@suse.cz>

	* flow.c (try_redirect_by_replacing_jump): Remove cc0 setter.

	* flow.c (forwarder_block_p): Fix for fallthru blocks.
	(try_redirect_by_replacing_jump): Update properly the count
	and frequency information.

Mon Jul  2 14:20:13 2001  Jeffrey A Law  (law@cygnus.com)

	* toplev.c (dump_file_index): Move SSA dumps just after first
	jump dump.
	(dump_file): Corresponding changes.
	(rest_of_compilation): Move SSA path to just after the first
	jump pass.
	* doc/gcc.texi (Passes): Update due to movement of SSA path.
	* doc/invoke.texi: Update dump file #s as they were completely
	out of date with reality.

2001-07-02  Geoffrey Keating  <geoffk@redhat.com>

	* doc/tm.texi (Frame Layout): Document STACK_PUSH_CODE.

	* expr.c (emit_move_insn_1): Deal with non-default
	STACK_PUSH_CODE.

	* expr.c (emit_single_push_insn): Fix warning.

2001-07-02  Toshiyasu Morita  <toshiyasu.morita@hsa.hitachi.com>

	* expr.c (emit_move_insn_1): Avoid modifying
	cfun->expr->x_stack_pointer when PUSH_ROUNDING is defined.

Mon Jul  2 15:33:31 2001  Richard Kenner  <kenner@vlsi1.ultra.nyu.edu>

	* emit-rtl.c (adjust_address): New function.
	* expr.h (adjust_address): Add declaration.
	* builtins.c: Replace some calls to change_address with calls to it
	or to validize_mem.
	* caller-save.c, dwarf2out.c, except.c, expmed.c, expr.c: Likewise.
	* function.c, config/a29k/a29k.md, config/alpha/alpha.c: Likewise.
	* config/arm/arm.c, config/convex/convex.c: Likewise.
	* config/dsp16xx/dsp16xx.md, config/fr30/fr30.c: Likewise.
	* config/i386/i386.c, config/i386/i386.md: Likewise.
	* config/ia64/ia64.c, config/ia64/ia64.md: Likewise.
	* config/m32r/m32r.c, config/m68k/m68k.md: Likewise.
	* config/m88k/m88k.c, config/mips/mips.md: Likewise.
	* config/ns32k/ns32k.c, config/rs6000/rs6000.c: Likewise.
	* config/sh/sh.c, config/sparc/sparc.md: Likewise.

2001-07-02  Jim Wilson  <wilson@redhat.com>

	* config/ia64/ia64.h: Delete obsolete lib1funcs.asm comment.

2001-07-02  Steve Ellcey  <sje@cup.hp.com>

        * config/ia64/t-ia64: Change LIB1ASMFUNCS to use single underscore.
        * config/ia64/lib1funcs.asm: Change macro names to match t-ia64.

2001-07-02  Zack Weinberg  <zackw@stanford.edu>

	* cppinit.c (lang_defaults): New table.
	(set_lang): Just read from lang_defaults into the live options
	structure.

2001-07-02  Zack Weinberg  <zackw@stanford.edu>

	* Makefile.in (doc): Depend on $(GENERATED_MANPAGES).
	* doc/.cvsignore: Add gcc.1, cpp.1, gcov.1.
	* doc/gcc.1, doc/cpp.1, doc/gcov.1: Removed.

2001-07-02  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>

	* doc/install.texi: Various spelling and markup fixes.
	(Installing GCC): Component specific installation instructions are
	gone.
	Fix reference.
	Warn about removing old install dir in the presence of shared libs.
	(Configuration): Invoke with options target to match configure
	--help.
	Consistently refer to gas, gld pathnames.
	Invert --enable-multilib documentation.
	Remove references to old compiler versions.

Mon Jul  2 12:50:51 2001  Richard Kenner  <kenner@vlsi1.ultra.nyu.edu>

	* flow.c (try_simplify_condjump): Fix typo in updating fallthru flags.

2001-07-02  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>

	* doc/install.texi (Specific, mips*-sgi-irix4): Split from IRIX 5
	section.
	(Specific, mips*-sgi-irix5): Note IDO download.
	Reworded MIPS C hints.
	Use GNU as instead of GAS.
	Markup fixes.
	Removed SGI Freeware reference, IRIX 6 only.
	(Specific, mips*-sgi-irix6): Removed ranlib caveats, obsolete.
	Note N64 library requirement/workaround.
	Update O32 hints.
	Complete list of structure passing bug victims.

2001-07-02  Gerald Pfeifer  <pfeifer@dbai.tuwien.ac.at>

	* doc/install.texi: Remove CVS Id.

2001-07-02  Andreas Jaeger  <aj@suse.de>

	* ssa-dce.c (note_inherently_necessary_set): Add unused attribute.
	(find_inherently_necessary): Remove unused variable.

2001-07-02  Nathan Sidwell  <nathan@codesourcery.com>

	* c-common.h (TDI_inlined): New ast dump phase.
	(dump_flag_name): New function.
	* c-dump.c (dump_files): Add inlined phase.
	(dump_flag_name): Define.
	* doc/invoke.texi (-fdump-ast-inlined): Document.

Mon Jul  2 06:29:36 2001  Richard Kenner  <kenner@vlsi1.ultra.nyu.edu>

	* stor-layout.c (layout_decl): Revert change to handling of alignment
	in packed types.

Sun Jul  1 11:53:52 2001  Richard Kenner  <kenner@vlsi1.ultra.nyu.edu>

	* c-common.c (decl_attributes, case A_MODE): Don't call layout_decl
	for FIELD_DECL.

2001-07-01  Geoffrey Keating  <geoffk@redhat.com>

	* doc/tm.texi (FUNCTION_ARG): Document that the last call
	is special.

2001-07-01  Nathan Sidwell  <nathan@codesourcery.com>

	* tlink.c (recompile_files): Remove COMPILER_PATH and
	LIBRARY_PATH from the environment.

2001-07-01  Zack Weinberg  <zackw@stanford.edu>

	* c-common.h (enum rid): Add RID_FIRST_AT, RID_LAST_AT,
	RID_LAST_PQ.  Move RID_FIRST_PQ down with the other FIRST/LAST
	enumerators.
	(OBJC_IS_AT_KEYWORD, OBJC_IS_PQ_KEYWORD): New macros.

	* c-parse.in (OBJC_STRING): Kill.
	(objc_string): Decompose to [objc_string] '@' STRING.
	(reswords): Take the leading '@' off all the Objective C keywords.
	(objc_rid_sans_at): Kill.
	(init_reswords): Don't initialize it.
	(yylexname): Use OBJC_IS_AT_KEYWORD and OBJC_IS_PQ_KEYWORD.
	(_yylex): Kill reconsider label.  Look ahead one token after
	an '@'; if we get an identifier, check whether it's an
	Objective C @-keyword.  If so, return the keyword.  Otherwise,
	put back the token and return the '@' as a terminal.

	* cpplib.c (lex_macro_node): Remove unnecessary check for
	leading '@' on identifier.  Clarify control flow and commentary.

Sun Jul  1 11:53:52 2001  Richard Kenner  <kenner@vlsi1.ultra.nyu.edu>

	* cse.c (new_label_ref): Variable deleted.
	(insert): Remove set of new_label_ref.
	(check_for_label_ref): New function.
	(cse_basic_block): Don't check new_label_ref; call check_for_label_ref.

See ChangeLog.5 for earlier changes.

From-SVN: r43861

	* emit-rtl.c (replace_equiv_address): New function.
	* expr.h (replace_equiv_address): New declaration.
	* explow.c (validize_mem): Call it instead of change_address and
	also call if -fforce-addr and address is constant.
	* expr.c: Replace more calls to change_address with adjust_address
	and/or replace_equiv_address or to validize_mem.
	* function.c, regmove.c, config/alpha/alpha.c: Likewise.
	* config/arm/arm.md, config/clipper/clipper.md: Likewise.
	* config/dsp16xx/dsp16xx.md, config/fr30/fr30.c: Likewise.
	* config/i370/i370.md, config/i860/i860.md: Likewise.
	* config/i960/i960.md, config/mips/mips.c: Likewise.
	* config/mips/mips.md, config/pa/pa.md: Likewise.
	* config/pdp11/pdp11.md, config/rs6000/rs6000.c: Likewise.
	* config/rs6000/rs6000.md, config/sh/sh.md: Likewise.

From-SVN: r43762

	* emit-rtl.c (adjust_address): New function.
	* expr.h (adjust_address): Add declaration.
	* builtins.c: Replace some calls to change_address with calls to it
	or to validize_mem.
	* caller-save.c, dwarf2out.c, except.c, expmed.c, expr.c: Likewise.
	* function.c, config/a29k/a29k.md, config/alpha/alpha.c: Likewise.
	* config/arm/arm.c, config/convex/convex.c: Likewise.
	* config/dsp16xx/dsp16xx.md, config/fr30/fr30.c: Likewise.
	* config/i386/i386.c, config/i386/i386.md: Likewise.
	* config/ia64/ia64.c, config/ia64/ia64.md: Likewise.
	* config/m32r/m32r.c, config/m68k/m68k.md: Likewise.
	* config/m88k/m88k.c, config/mips/mips.md: Likewise.
	* config/ns32k/ns32k.c, config/rs6000/rs6000.c: Likewise.
	* config/sh/sh.c, config/sparc/sparc.md: Likewise.

From-SVN: r43702

From-SVN: r43671

* integrate.c (ggc.h): Include.
(initial_value_pair, initial_value_struct,
setup_initial_hard_reg_value_integration): Add prototypes.
(expand_inline_function): Call
setup_initial_hard_reg_value_integration.
(has_func_hard_reg_initial_val, get_func_hard_reg_initial_val,
get_hard_reg_initial_val, has_hard_reg_initial_val): New functions
to keep track of values present at the start of a function.
(mark_hard_reg_initial_vals): New, for gc.
(setup_initial_hard_reg_value_integration): New.  Sets up pseudo
mappings for initial values.
(emit_initial_value_sets): New.  Emits code to set initial value
pseudos.
* integrate.h: Add prototypes for new functions.
* function.h (struct function): Add hard_reg_initial_vals field.
* function.c (integrate.h): Include.
(mark_function_status): Call
mark_hard_reg_initial_vals.
* toplev.c (integrate.h): Include.
(rest_of_compilation): Call emit_initial_value_sets.

From-SVN: r43486

From-SVN: r43408

	* function.c (diddle_return_value): Kill code to determine
	return value before expand_function_end.
	(expand_function_end): Delay call to clobber_return_register
	after fucntion return value is computed.

	Re-install temporary reverted patch:
	* toplev.c (rest_of_compilation): Call split_all_insns
	before reg-stack and shorten-branches. Do shorten-branches
	after reg-stack.
	* final.c (shorten_branches): Remove insn splitting code.

From-SVN: r43044

	* function.c (clobber_return_register): Clobber the pseudo return
	register too.

From-SVN: r43011

	* c-tree.h (lang_decl): Add pending_sizes fields.
	* c-decl.c (store_parm_decls): Save pending_sizes away for nested
	functions.
	(c_expand_body): Expand them.
	(lang_mark_tree): Mark lang_decl:pending_sizes.
	* function.c (expand_pending_sizes): New function, broken out
	from ...
	(expand_function_start): ... here.
	* tree.h (expand_pending_sizes): Declare it.

From-SVN: r42892

        * function.c (expand_function_start): Don't abort on PARALLEL
        returns from hard_function_value.

From-SVN: r42577

        * function.c (expand_function_start): Always use a pseudo
        for the function result value.

From-SVN: r42486

	* function.c (expand_function_start): Avoid creating BLKmode
	pseudos.

	* dwarf2out.c (output_comp_unit): Always output a compilation-unit
	DIE, even if it has no children.
	(dwarf2out_finish): Always output the line-number table, even if
	it has no content.

From-SVN: r42254

	* function.c (fixup_var_regs_1, case SUBREG): Use promoted mode
	for replacement.

From-SVN: r41765

	* bitmap.c: Change NULL_PTR to NULL or "(rtx*)0".
	* c-common.c: Likewise.
	* c-decl.c: Likewise.
	* combine.c: Likewise.
	* rs6000.c: Likewise.
	* except.c: Likewise.
	* explow.c: Likewise.
	* expr.c: Likewise.
	* fold-const.c: Likewise.
	* function.c: Likewise.
	* gcc.c: Likewise.
	* gcse.c: Likewise.
	* integrate.c: Likewise.
	* loop.c: Likewise.
	* objc/objc-act.c: Likewise.
	* recog.c: Likewise.
	* reg-stack.c: Likewise.
	* reload.c: Likewise.
	* reload1.c: Likewise.
	* simplify-rtx.c: Likewise.
	* stmt.c: Likewise.
	* varasm.c: Likewise.

From-SVN: r41722

	* function.c (purge_addressof_1): Remove the duplicate
	if (code == SET) block.  Fold the two if (code == ADDRESSOF)
	blocks together.

From-SVN: r41649

function.c (expand_function_end): Always clobber the return registers, even if there is no return label.

	* function.c (expand_function_end): Always clobber the
	return registers, even if there is no return label.

From-SVN: r41612

	* gcse.c (gcse_main): Fix comment typo.
	(delete_null_pointer_check): Likewise.
	(hash_scan_set): Don't consider sets with REG_EQUIV MEM notes.
	* cse.c (cse_insn): Likewise.
	* function.c (fixup_var_refs_insns_with_hash): The sequence is
	toplevel.

	* gcc.c-torture/execute/20010403-1.c: New test.

From-SVN: r41444

	* function.c (expand_function_end): Handle PARALLEL real_decl_rtl.

From-SVN: r41361

2001-04-10  Andrew MacLeod  <amacleod@redhat.com>

	* function.c (purge_single_hard_subreg_set): Only check REGNO if
	the subreg was a hard register. Pseudos are left as subregs.

From-SVN: r41217

* function.h (virtuals_instantiated): Declare.
* function.c: (virtuals_instantiated): Make global.
* calls.c (emit_library_call_value_1): Use
virtual_outgoing_args_rtx only if it hasn't been instantiated.
Otherwise, use the stack pointer directly.

From-SVN: r41127

2001-04-03  Jakub Jelinek  <jakub@redhat.com>
	    David S. Miller  <davem@pierdol.cobaltmicro.com>
            Andrew MacLeod  <amacleod@redhat.com>

	Use byte offsets in SUBREGs instead of words.

	* alias.c (nonlocal_mentioned_p): Use subreg_regno function.
	* caller-save.c (mark_set_regs): Change callers of subreg_hard_regno
	to pass new argument.
	(add_stored_regs): Use subreg_regno_offset function.
	* calls.c (expand_call): For non-paradoxical SUBREG take endianess
	into account.
	(precompute_arguments): Use gen_lowpart_SUBREG.
	* combine.c (try_combine): Replace explicit XEXP with SUBREG_REG.
	(combine_simplify_rtx): Rework to use SUBREG_BYTE.
	(simplify_set): Rework to use SUBREG_BYTE.
	(expand_field_assignment): Use SUBREG_BYTE.
	(make_extraction): Use SUBREG_BYTE.
	(if_then_else_cond): Use SUBREG_BYTE.
	(apply_distributive_law): Use SUBREG_BYTE and fixup subreg comments.
	(gen_lowpart_for_combine): Compute full byte offset.
	* cse.c (mention_regs): Use SUBREG_BYTE.
	(remove_invalid_subreg_refs): Rework to use SUBREG_BYTE.
	(canon_hash): Use SUBREG_BYTE.
	(fold_rtx): Pass SUBREG_BYTE div UNITS_PER_WORD to operand_subword.
	(gen_lowpart_if_possible): Formatting.
	* dbxout.c (dbxout_symbol_location): Compute SUBREG hard regnos
	correctly.
	* dwarf2out.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
	(mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
	(loc_descriptor): Fixup explicit XEXP into SUBREG_REG
	* dwarfout.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
	(output_mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
	(output_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
	* emit-rtl.c (gen_rtx_SUBREG): New function, used to verify
	certain invariants about SUBREGs the compiler creates.
	(gen_lowpart_SUBREG): New function.
	(subreg_hard_regno): New function to get the final register number.
	(gen_lowpart_common): Use SUBREG_BYTE.
	(gen_imagpart): Spacing nits.
	(subreg_realpart_p): Use SUBREG_BYTE.
	(gen_highpart): Use SUBREG_BYTE.
	(subreg_lowpart_p): Always compute endian corrected goal offset,
	even at the byte level, then compare against that.
	(constant_subword): New function, pulled out all constant cases
	from operand_subword and changed second argument name to offset.
	(operand_subword): Detect non REG/SUBREG/CONCAT/MEM cases early
	and call constant_subword to do the work.  Return const0_rtx if
	looking for a word outside of OP.
	(operand_subword_force): Change second arg name to offset.
	* expmed.c (store_bit_field): Use SUBREG_BYTE.
	(store_split_bit_field): Use SUBREG_BYTE.
	(extract_bit_field): Use SUBREG_BYTE.
	(extract_split_bit_field): Use SUBREG_BYTE.
	(expand_shift): Use SUBREG_BYTE.
	* expr.c (store_expr, expand_expr): Use gen_lowpart_SUBREG.
	* final.c (alter_subreg) Use subreg_hard_regno and SUBREG_BYTE.
	* flow.c (set_noop_p): Use SUBREG_BYTE.
	(mark_set_1): Remove ALTER_HARD_SUBREG. Use subreg_regno_offset instead.
	* function.c (fixup_var_refs_1): Fixup explicit XEXP into a SUBREG_REG.
	(fixup_memory_subreg): Use SUBREG_BYTE and remove byte endian
	correction code.
	(optimize_bit_field): Use SUBREG_BYTE.
	(purge_addressof_1): Use SUBREG_BYTE.
	(purge_single_hard_subreg_set): Use subreg_regno_offset function.
	(assign_params): Mark arguments SUBREG_PROMOTED_VAR_P if they are
	actually promoted by the caller and PROMOTE_FOR_CALLS_ONLY is true.
	* gengenrtl.c (special_rtx): Add SUBREG.
	* global.c (mark_reg_store): Use SUBREG_BYTE.
	(set_preference): Rework to use subreg_regno_offset and SUBREG_BYTE.
	* ifcvt (noce_emit_move_insn): Use SUBREG_BYTE.
	* integrate.c (copy_rtx_and_substitute): Use SUBREG_BYTE and make sure
	final byte offset is congruent to subreg's mode size.
	(subst_constants): Use SUBREG_BYTE.
	(mark_stores): Use subreg_regno_offset function.
	* jump.c (rtx_renumbered_equal_p, true_regnum): Use subreg_regno_offset
	function and SUBREG_BYTE.
	* local-alloc.c (combine_regs): Use subreg_regno_offset function.
	(reg_is_born): Use subreg_hard_regno.
	* recog.c (valid_replace_rtx_1): Use SUBREG_BYTE and remove byte
	endian correction code.  Don't combine subregs unless resulting
	offset aligns with type.  Fix subreg constant extraction for DImode.
	Simplify SUBREG of VOIDmode CONST_DOUBLE.
	(general_operand): Remove dead mode_altering_drug code.
	(indirect_operand): Use SUBREG_BYTE.
	(constrain_operands): Use subreg_regno_offset function.
	* reg-stack.c (get_true_reg): Use subreg_regno_offset function.
	* regmove.c (regmove_optimize): Use SUBREG_BYTE.
	(optimize_reg_copy_3): Use gen_lowpart_SUBREG.
	* regs.h (REG_SIZE): Allow target to override.
	(REGMODE_NATURAL_SIZE): New macro which target can override.
	* reload.c (reload_inner_reg_of_subreg): subreg_regno should be used
	on the entire subreg rtx.
	(push_reload): Use SUBREG_BYTE in comments and code.
	(find_dummy_reload): Use subreg_regno_offset.  Only adjust offsets
	for hard registers inside subregs.
	(operands_match_p): Use subreg_regno_offset.
	(find_reloads): Use SUBREG_BYTE and only advance offset for subregs
	containing hard regs.
	(find_reload_toplev): Use SUBREG_BYTE.  Remove byte endian
	corrections when fixing up MEM subregs.
	(find_reloads_address_1): Use SUBREG_BYTE, subreg_regno, and
	subreg_regno_offset where appropriate.
	(find_reloads_subreg_address): Use SUBREG_BYTE.  Remove
	byte endian corrections when fixing up MEM subregs.
	(subst_reloads): When combining two subregs, make sure final
	offset is congruent to subreg's mode size.
	(find_replacement): Use SUBREG_BYTE and subreg_regno_offset.
	(refers_to_regno_for_reload_p): Use subreg_regno.
	(reg_overlap_mentioned_for_reload_p): Use subreg_regno_offset.
	* reload1.c (eliminate_regs) Use SUBREG_BYTE. Remove byte endian
	correction code for memory subreg fixups.
	(forget_old_reload_1): Use subreg_regno_offset.
	(choose_reload_regs): Use subreg_regno.
	(emit_input_reload_insns): Use SUBREG_BYTE.
	(reload_combine_note_store): Use subreg_regno_offset.
	(move2add_note_store): Use subreg_regno_offset.
	* resource.c (update_live_status, mark_referenced_resources): Use
	subreg_regno function.
	(mark_set_resources): Use subreg_regno function.
	* rtl.h (SUBREG_WORD): Rename to SUBREG_BYTE.
	(subreg_regno_offset, subreg_regno): Define prototypes.
	(subreg_hard_regno, constant_subword, gen_rtx_SUBREG): Newi functions.
	(gen_lowpart_SUBREG): Add prototype.
	* rtl.texi (subreg): Update to reflect new byte offset representation.
	Add mentioning of the effect that BYTES_BIG_ENDIAN has on subregs now.
	* rtlanal.c (refers_to_regno_p): Use subreg_regno.
	(reg_overlap_mentioned_p): Use subreg_regno.
	(replace_regs); Make sure final offset of combined subreg is
	congruent to size of subreg's mode.
	(subreg_regno_offset): New function.
	(subreg_regno): New function.
	* sched-vis.c (print_value): Change SUBREG_WORD to SUBREG_BYTE.
	* sdbout.c (sdbout_symbol): Compute offset using alter_subreg.
	* stmt.c (expand_anon_union_decl): Use gen_lowpart_SUBREG.
	* tm.texi (ALTER_HARD_SUBREG): Remove, it is now dead.
	(SUBREG_REGNO_OFFSET): Describe SUBREG_REGNO_OFFSET overrides.
	* config/a29k/a29k.c (gpc_reg_operand): Use subreg_regno.
	(a29k_get_reloaded_address): Use SUBREG_BYTE.
	(print_operand): Use SUBREG_BYTE.
	* config/alpha/alpha.c (print_operand_address): Use SUBREG_BYTE.
	* config/arm/arm.c (arm_reload_in_hi): Use SUBREG_BYTE.
	(arm_reload_out_hi): Use SUBREG_BYTE.
	* config/d30v/d30v.c (d30v_split_double): Use subreg_regno_offset
	instead of SUBREG_WORD.
	(d30v_print_operand_memory_reference): Use subreg_regno_offset.
	* config/dsp16xx/dsp16xx.md (extendqihi2, zero_extendqihi2): Fix
	SUBREG creation to use byte offset.
	* config/h8300/h8300.md (Unnamed HImode zero extraction and 16bit
	inverted load insns): Fix explicit rtl subregs to use byte
	offsets.
	* config/i370/i370.md (cmpstrsi, movstrsi, mulsi3, divsi3,
	udivsi3, umodsi3): Generate SUBREGs with byte offsets.
	* config/i860/i860.c (single_insn_src_p): Use SUBREG_BYTE.
	* config/i860/i860.md (mulsi3_big): Fixup explicit SUBREGs in rtl
	to use byte offsets.
	(unnamed fmlow.dd insn): Fixup SUBREGS to use byte offsets.
	* config/i960/i960.md (extendhisi2): Generate SUBREGs with byte
	offsets, also make sure it is congruent to SUBREG's mode size.
	(extendqisi2, extendqihi2, zero_extendhisi2, zero_extendqisi2,
	unnamed ldob insn): Generate SUBREGs with byte offset.
	(zero_extendqihi2): SUBREG's are byte offsets.
	* config/m68hc11/m68hc11.c (m68hc11_gen_lowpart): Use SUBREG_BYTE.
	(m68hc11_gen_highpart): Use SUBREG_BYTE.
	* config/m68k/m68k.md (zero_extendhisi2, zero_extendqihi2,
	zero-extendqisi2): Generate SUBREGs with byte offset.
	(umulsidi3, mulsidi3, subreghi1ashrdi_const32,
	subregsi1ashrdi_const32, subreg1lshrdi_const32): Fixup explicit
	subregs in rtl to use byte offsets.
	* config/m88k/m88k.md (extendsidi2): fixup subregs to use byte offset.
	* config/mips/mips.c (mips_move_1word): Use subreg_regno_offset.
	(mips_move_2words): Use subreg_regno_offset.
	(mips_secondary_reload_class): Use subreg_regno_offset.
	* config/mips/mips.md (DImode plus, minus, move, and logical op
	splits): Fixup explicit subregs in rtl to use byte offsets.
	* config/mn10200/mn10200.c (print_operand): Use subreg_regno function.
	* config/mn10300/mn10300.c (print_operand): Use subreg_regno function.
	* config/ns32k/ns32k.md (udivmoddisi4): Fix explicit subregs in
	rtl to use byte offsets.
	* config/pa/pa.c (emit_move_sequence): Use SUBREG_BYTE.
	* config/pa/pa.md (floatunssisf2, floatunssidf2, mulsi3): fix explicit
	subregs to use byte offsets.
	* config/pdp11/pdp11.md (zero_extendhisi2, modhi3, modhi3+1):
	Fixup explicit subregs in rtl to use byte offsets.
	* config/romp/romp.c (memory_offset_in_range_p): Use SUBREG_BYTE
	and remove byte endian correction code.
	* config/sh/sh.c (output_movedouble): Use subreg_regno.
	(gen_ashift_hi): Use SUBREG_BYTE.
	(regs_used): Use subreg_regno_offset.
	(machine_dependent_reorg): Use subreg_regno_offset.
	* config/sh/sh.h (INDEX_REGISTER_RTX_P): Use SUBREG_BYTE.
	* config/sh/sh.md (DImode and DFmode move splits): Use subreg_regno.
	(movdf_i4): Subregs are byte offsets now.
	* config/sparc/sparc.c (ultra_find_type): Use SUBREG_BYTE.
	* config/sparc/sparc.h (ALTER_HARD_SUBREG): Removed.
	(REGMODE_NATURAL_SIZE): Override.
	(REG_SIZE): For SUBREG check float mode on SUBREG_REG's mode.
	* config/sparc/sparc.md (TFmode move splits): Generate SUBREGs
	with byte offsets.
	(zero_extendhisi2, zero_extendqidi2_insn, extendhisi2,
	extendqihi2, sign_extendqihi2_insn, sign_extendqisi2_insn,
	extendqidi2): Generate SUBREGs with byte offsets, also make sure
	it is congruent to SUBREG's mode size.
	(smulsi3_highpart_v8plus): Fix explicit subregs in rtl to use byte
	offsets.
	(cmp_siqi_trunc, cmp_siqi_trunc_set, cmp_diqi_trunc,
	cmp_diqi_trunc_set, lshrdi3_v8plus+1, lshrdi3_v8plus+2,
	lshrdi3_v8plus+3, lshrdi3_v8plus+4): Use proper
	SUBREG_BYTE offset for non-paradoxical subregs in patterns.
	* config/v850/v850.c (print_operand, output_move_double): Use
	subreg_regno function.

Co-Authored-By: Andrew MacLeod <amacleod@redhat.com>
Co-Authored-By: David S. Miller <davem@pierdol.cobaltmicro.com>

From-SVN: r41058

From-SVN: r40924

        * function.c (expand_function_start): Set DECL_REGISTER on
        a pseudo used for DECL_RESULT.

From-SVN: r40896

	* mkconfig.sh: Include insn-flags.h.
	* Makefile.in (CONFIG_H): Include insn-flags.h.
	(lots of objects): Remove insn-codes.h and insn-flags.h.

	* alias.c, bb-reorder.c, calls.c, do-loop.c, flow.c, haifa-sched.c,
	integrate.c, jump.c, loop.c, predict.c, profile.c, reg-stack.c,
	regmove.c, reorg.c, a29k/a29k.c, alpha/alpha.c, arc/arc.c, arm/arm.c,
	avr/avr.c, clipper/clipper.c, convex/convex.c, d30v/d30v.c,
	dsp16xx/dsp16xx.c, fr30/fr30.c, h8300/h8300.c, i370/i370.c,
	i386/i386.c, i860/i860.c, ia64/ia64.c, m32r/m32r.c, m68hc11/m68hc11.c,
	m68k/m68k.c, m88k/m88k.c, mcore/mcore.c, mn10200/mn10200.c,
	mn10300/mn10300.c, ns32k/ns32k.c, pa/pa.c, pdp11/pdp11.c,
	pj/pj.c, romp/romp.c, rs6000/rs6000.c, sh/sh.c, sparc/sparc.c,
	v850/v850.c, vax/vax.c:
	Don't include insn-flags.h.

	* diagnostic.c, expr.h, reload.c, toplev.c:
	Don't include insn-codes.h.

	* builtins.c, combine.c, except.c, explow.c, expmed.c, expr.c,
	final.c, function.c, optabs.c, recog.c, reload1.c, stmt.c,
	c4x/c4x.c, i960/i960.c, mips/mips.c:
	Don't include insn-codes.h or insn-flags.h.

	* genemit.c, genopinit.c, genoutput.c: Don't include insn-codes.h
	or insn-flags.h in the generated code.
	* genflags.c (gen_proto): Use "struct rtx_def *" instead of "rtx".
	(main): Forward declare struct rtx_def.

From-SVN: r40754

        * defaults.h (ACCUMULATE_OUTGOING_ARGS, PUSH_ARGS): Move from ...
        * calls.c: ... here.
        * combine.c, expr.c, final.c, function.c toplev.c: Don't provide
        defaults for them here.

From-SVN: r40603

	* varasm.c (assemble_alias): Use DECL_ASSEMBLER_NAME, not the
	contents of the RTL, to determine the name of the object.

	* tree.h (DECL_RTL): Allocate RTL lazily.
	(SET_DECL_RTL): New macro.
	(DECL_RTL_SET_P): Likewise.
	(COPY_DECL_RTL): Likewise.
	(DECL_RTL_IF_SET): Likewise.
	* varasm.c (make_decl_rtl): Add assertions about the kind of
	declaration we are processing.
	* c-decl.c (duplicate_decls): Use COPY_DECL_RTL, DECL_RTL_SET_P, etc.
	(start_decl): Likewise.
	(finish_decl): Likewise.
	* c-semantics.c (emit_local_var): Likewise.
	* calls.c (expand_call): Likewise.
	* dbxout.c (dbxout_symbol): Likewise.
	* emit-rtl.c (unshare_all_rtl): Likewise.
	(unshare_all_decls): Likewise.
	(reset_used_decls): Likewise.
	* expr.c (store_constructor): Likewise.
	(safe_from_p): Likewise.
	(expand_expr): Likewise.
	* function.c (put_var_into_stack): Likewise.
	(instantiate_decls_1): Likewise.
	(assign_parms): Likewise.
	(expand_function_start): Likewise.
	(expand_function_end): Likewise.
	* ggc-common.c (gcc_mark_trees): Likewise.
	* integrate.c (function_cannot_inline_p): Likewise.
	(copy_decl_for_inlining): Likewise.
	(expand_inline_function): Likewise.
	(integrate_parm_decls): Likewise.
	(integrate_decl_tree): Likewise.
	* print-tree.c (print_node): Likewise.
	* reg-stack.c (stack_result): Likewise.
	* stmt.c (label_rtx): Likewise.
	(expand_return): Likewise.
	(expand_decl): Likewise.
	(expand_decl_cleanup): Likewise.
	(expand_anon_union_decl): Likewise.
	* toplev.c (check_global_declarations): Likewise.
	(rest_of_decl_compilation): Likewise.
	* tree.c (simple_cst_equal): Likewise.
	* objc/objc-act.c (generate_static_references): Likewise.

	* class.c (build_clone): Use COPY_DECL_RTL, DECL_RTL_SET_P, etc.
	* cp-tree.h (DECL_IN_MEMORY_P): Likewise.
	* decl.c (duplicate_decls): Likewise.
	(builtin_function): Likewise.
	(build_library_fn): Likewise.
	(build_cp_library_fn): Likewise.
	(check_initializer): Likewise.
	(cp_finish_decl): Likewise.
	* decl2.c (grokfield): Likewise.
	(grok_function_init): Remove #if 0'd code.
	(finish_anon_union): Use COPY_DECL_RTL, DECL_RTL_SET_P, etc.
	* friend.c (do_friend): Likewise.
	* init.c (get_temp_regvar): Likewise.
	* method.c (make_thunk): Likewise.
	* pt.c (tsubst_friend_function): Likewise.
	(tsubst_decl): Likewise.
	(regenerate_decl_from_template): Likewise.
	* semantics.c (genrtl_named_return_value): Likewise.
	(expand_body): Likewise.
	(genrtl_finish_function): Likewise.
	* tree.c (cp_tree_equal): Likewise.

	* com.c (ffecom_member_phase_2): Use COPY_DECL_RTL,
	DECL_RTL_SET_P, etc.
	(duplicate_decls): Likewise.
	(start_decl): Likewise.

	* class.c (build_static_field_ref): Likewise.
	(make_method_value): Likewise.
	(get_dispatch_table): Likewise.

	* decl.c (push_jvm_slot): Use COPY_DECL_RTL, DECL_RTL_SET_P, etc.

From-SVN: r40482

emit-rtl.c (remove_unnecessary_notes): Reverse Richard Kenner's 2001-02-24 which broke building the Java library.

2001-03-12  Jeffrey Oldham  <oldham@codesourcery.com>

	* emit-rtl.c (remove_unnecessary_notes): Reverse Richard Kenner's
	2001-02-24 which broke building the Java library.
	* function.c (identify_blocks): Likewise.
	(all_blocks): Likewise.
	* integrate.c (integrate_decl_tree): Likewise.
	* print-tree.c (print_node): Likewise.
	* tree.h (BLOCK_NUMBER): Likewise.
	(struct tree_block): Likewise.

From-SVN: r40431

	* config/xm-lynx.h, config/xm-std32.h, config/a29k/xm-a29k.h,
	config/a29k/xm-unix.h, config/alpha/xm-alpha.h,
	config/arc/xm-arc.h, config/arm/xm-arm.h, config/c4x/xm-c4x.h,
	config/clipper/xm-clix.h, config/convex/xm-convex.h,
	config/d30v/xm-d30v.h, config/dsp16xx/xm-dsp16xx.h,
	config/elxsi/xm-elxsi.h, config/fr30/xm-fr30.h,
	config/h8300/xm-h8300.h, config/i370/xm-i370.h,
	config/i370/xm-linux.h, config/i370/xm-mvs.h,
	config/i370/xm-oe.h, config/i386/xm-aix.h,
	config/i386/xm-i386.h, config/i386/xm-osf.h,
	config/i860/xm-i860.h, config/i960/xm-i960.h,
	config/ia64/xm-ia64.h, config/m32r/xm-m32r.h,
	config/m68k/xm-m68k.h, config/m88k/xm-m88k.h,
	config/mcore/xm-mcore.h, config/mips/xm-mips.h,
	config/mn10200/xm-mn10200.h, config/mn10300/xm-mn10300.h,
	config/ns32k/xm-ns32k.h, config/pa/xm-linux.h,
	config/pa/xm-pa.h, config/pa/xm-pa64hpux.h,
	config/pa/xm-pahpux.h, config/pa/xm-papro.h,
	config/pj/xm-pj.h, config/romp/xm-romp.h,
	config/rs6000/xm-beos.h, config/rs6000/xm-rs6000.h,
	config/rs6000/xm-sysv4.h, config/sh/xm-sh.h,
	config/sparc/xm-sparc.h, config/sparc/xm-sysv4.h,
	config/v850/xm-v850.h, config/vax/xm-vax.h,
	config/vax/xm-vms.h, config/we32k/xm-we32k.h:
	Do not define TRUE or FALSE.

	* config/i386/xm-aix.h, config/i386/xm-osf.h: Delete; made
	empty by above change.
	* config.gcc: Remove references to these files.

	* configure.in: Detect stdbool.h.
	* configure, config.in: Regenerate.
	* system.h: Include stddef.h here if available.  Set
	HAVE__BOOL based on GCC_VERSION and __STDC_VERSION__.  Then
	set up a sensible boolean type at the very end.

	* combine.c, cse.c, expr.c, fold-const.c, gensupport.c,
	f/com.c, config/mcore/mcore.c:
	Rename variables named 'true' and/or 'false'.

	* hash.h: Delete 'boolean' typedef and related #undefs.
	* f/proj.h: Delete 'bool' type.  Don't include stddef.h here.

	* function.c, ggc-common.c, hash.h, hash.c, tlink.c, cp/decl.c,
	java/class.c, java/decl.c, java/java-tree.h:
	Replace all uses of 'boolean' with 'bool'.

From-SVN: r40176

	* tree.h (BLOCK_DEAD): New macro.
	(struct tree_block): New flag, dead_flag.
	* print-tree.c (print_node, case 'b'): Print missing fields.
	* emit-rtl.c (remove_unnecessary_notes): Set BLOCK_DEAD.
	* function.c (identify_blocks): Enable test for misplaced notes.
	(all_blocks): Skip BLOCK_DEAD blocks.
	* integrate.c (integrate_decl_tree): Likewise.

From-SVN: r40039

	* function.c (epilogue_done): Be ready for first basic block not
	containing PROLOGUE_END note.
	(reposition_prologue_and_epilogue_notes): Avoid placing
	PROLOGUE_END note between BASIC_BLOCK.

From-SVN: r40020

	* function.c (assign_parms): Set RTX_UNCHANGING_P in pseudo when we
	do in memory.

From-SVN: r39737

combine.c (nonzero_bits, case PLUS): If pointers extend unsigned and this is the sum of a pointer and a constant...

	* combine.c (nonzero_bits, case PLUS): If pointers extend unsigned
	and this is the sum of a pointer and a constant, we know the result
	did not overflow.
	(num_sign_bit_copies, case PLUS): Likewise.
	* explow.c (convert_memory_address): Remove opposite SUBREG.
	* function.c (instantiate_new_reg): New function (from common code).
	(instantiate_virtual_regs_1): Call it.
	For PLUS, handle if (plus (subreg (virt-reg) (const_int))
	if pointers sign- or zero-extend.
	* simplify-rtx.c (simplify_unary_operation, case ZERO_EXTEND):
	If pointers extend unsigned, use inside of SUBREG.
	(simplify_unary_operation, case SIGN_EXTEND): Likewise, if sign extend.

From-SVN: r39489

        * final.c: Move the declaration profile_label_no to ...
        * output.h: ... here.
        * function.c (expand_function_start): Call PROFILE_HOOK.
        * config/rs6000/aix.h: Define PROFILE_HOOK.
        * config/rs6000/rs6000-protos.h: output_profile_hook new.
        * config/rs6000/rs6000.c (output_profile_hook): Define.
        (output_prolog): Do nothing for ABI_AIX as it is taken care by
        output_profile_hook.
        tm.texi : Explain new macro PROFILE_HOOK.

From-SVN: r39473

From-SVN: r39154

2001-01-20  Jakub Jelinek  <jakub@redhat.com>

	* function.c (fixup_var_refs): Move CALL_PLACEHOLDER handling...
	(fixup_var_refs_insns): ...here.

	* gcc.c-torture/compile/20010118-1.c: New test.

2001-01-20  Zack Weinberg  <zack@wolery.stanford.edu>

	* function.c (fixup_var_refs_insns): Break up into
	fixup_var_refs_insn [body of loop], fixup_var_refs_insns
	[loop over entire insn list], and fixup_var_refs_insns_with_hash
	[loop over hash table entries].
	(fixup_var_refs): Adjust calls to fixup_var_refs_insns and/or
	fixup_var_refs_insns_with_hash, to match above changes.

From-SVN: r39151

	* alias.c (rtx_equal_for_memref_p, case ADDRESSOF): Don't assume
	args are REG.
	* expr.c (store_constructor): Don't look at MEM_ALIAS_SET unless MEM.
	* function.c (assign_parms): Use INTVAL for a CONST_INT.

From-SVN: r39139

From-SVN: r39066

Document {init|mark|free}_machine_status.

From-SVN: r38882