of returning by value.

From-SVN: r278196

  The recent vectorization cost adjustment on load leads
  the profitable min iteration count to change from 19 to 12.
  The case happens to hit the threshold.  This patch is to
  adjust the loop bound from 16 to 14.

  gcc/testsuite/ChangeLog

  2019-11-14  Kewen Lin  <linkw@gcc.gnu.org>

    PR target/92464
    * gcc.dg/vect/costmodel/ppc/costmodel-vect-76b.c: Adjust
    loop bound due to load cost adjustment.

From-SVN: r278195

This patch adds support for the C2x [[]] attribute syntax to the C
front end.  Support is only added for C at this point, not for
Objective-C; I intend to add the unbounded lookahead required to
support it for Objective-C in a followup patch, but maybe not in
development stage 1.

The syntax is supported in all relevant places where the standard says
it is supported, but support is not added for the individual
attributes specified in C2x (all of which are optional to support).  I
expect to add support for some of them in followup patches; all except
nodiscard can be mapped directly to the semantics of an existing GNU
attribute (subject to extra checks for invalid usages such as the same
attribute being used more than once inside a single [[]]), and the
fallthrough attribute already works after this patch because of
existing special-case code handling it (but without some of the checks
for invalid usage being present).

Note that the four functions c_token_starts_declspecs,
c_token_starts_declaration, c_parser_next_token_starts_declspecs and
c_parser_next_tokens_start_declaration do *not* accept "[[".  This is
analogous with the handling of __extension__: both cases have the
property that they can start either a declaration or some other
statements and so need an unbounded number of tokens to be parsed in
the caller before it can find out what kind of syntactic construct
follows.  Note also that, while I updated all places calling those
functions for standard C syntax to handle attributes if applicable, I
did not do anything regarding calls to such functions for OpenMP or
OpenACC constructs.  Thus, if there are such constructs using such
functions where "[[" *should* be accepted as a possible start to a
declaration, the code for parsing those constructs should be updated
accordingly.

Although all cases of the syntax are handled, and attributes applied
to the constructs the standard says they should be (with less laxity
than there is for GNU attributes to allow an attribute applied to one
construct to be moved automatically to another one), there is a major
limitation in the existing language-independent code in attribs.c
preventing most cases of type attributes from working.  The following
code has been present with minor changes since the first support for
[[]] attributes for C++ was added:

      if (TYPE_P (*node)
          && cxx11_attr_p
          && !(flags & ATTR_FLAG_TYPE_IN_PLACE))
        {
          /* This is a c++11 attribute that appertains to a
             type-specifier, outside of the definition of, a class
             type.  Ignore it.  */
          auto_diagnostic_group d;
          if (warning (OPT_Wattributes, "attribute ignored"))
            inform (input_location,
                    "an attribute that appertains to a type-specifier "
                    "is ignored");
          continue;
        }

I see no justification for this in general for either C or C++ and so
propose to remove or restrict it in a followup bug-fix patch.  Both C
and C++ are clear about attributes in certain places (at the end of
declaration specifiers, or after function or array declarators)
appertaining to a specific type (and explicitly say, in the case of
attributes at the end of declaration specifiers, that they only apply
for that particular use of that type, not for subsequent uses of the
same type without the attributes).  Thus it seems clear to me that,
for example,

int [[gnu::mode(DI)]] x;

ought to be accepted as an analogue in [[]] syntax for

int __attribute__((mode(DI))) x;

(or strictly as an analogue for a version of that with extra
parentheses to make the GNU attribute bind properly to the type rather
than being automatically moved from the declaration to the type).
There are certain cases where an attribute *does* only make sense for
the definition of a type (e.g. "packed" on structure types), but those
should already be handled in the individual attribute handlers (such
as handle_packed_attribute, which already has code to deal with that
issue).  So my inclination is that the above-quoted check in attribs.c
should simply be removed, but failing that it should be restricted to
structure and union types (and such a change would be a bug-fix).
That would then allow various cases of [[]] attributes on types to
work properly.

Bootstrapped with no regressions on x86_64-pc-linux-gnu.

gcc/c:
	* c-tree.h (enum c_typespec_kind): Add ctsk_tagref_attrs and
	ctsk_tagfirstref_attrs.
	(struct c_declspecs): Update description of attrs.  Add
	postfix_attrs and non_std_attrs_seen_p.  Increase size of
	typespec_kind bit-field.
	(c_warn_unused_attributes): New declaration.
	(parser_xref_tag): Update prototype.
	* c-decl.c (c_warn_unused_attributes): New function.
	(shadow_tag_warned): Handle ctsk_tagfirstref_attrs and
	ctsk_tagref_attrs.  Handle attribute declarations.
	(check_compound_literal_type): Handle ctsk_tagfirstref_attrs.
	(grokdeclarator): Handle standard attributes.
	(parser_xref_tag): Add arguments have_std_attrs and attrs.  Apply
	attributes to incomplete type reference.
	(xref_tag): Update call to parser_xref_tag.
	(declspecs_add_addrspace, declspecs_add_type)
	(declspecs_add_scspec, declspecs_add_attrs): Set
	non_std_attrs_seen_p.
	(finish_declspecs): Apply postfix standard attributes to type.
	* c-parser.c (c_token_starts_declspecs)
	(c_token_starts_declaration, c_parser_next_token_starts_declspecs)
	(c_parser_next_tokens_start_declaration): Update comments.
	(c_parser_consume_token, c_parser_consume_pragma): Handle moving
	parser->tokens[2] to parser->tokens[1].
	(c_parser_nth_token_starts_std_attributes)
	(c_parser_std_attribute_specifier_sequence): New functions.
	(c_parser_declaration_or_fndef): Add arguments have_attrs and
	attrs.  All callers changed.  Handle standard attributes.
	(c_parser_parms_declarator, c_parser_parms_list_declarator)
	(c_parser_parameter_declaration): Add argument have_gnu_attrs.
	All callers changed.
	(c_parser_declspecs): Add arguments start_std_attr_ok and
	end_std_attr_ok.  All callers changed.  Handle standard
	attributes.
	(c_parser_enum_specifier, c_parser_struct_or_union_specifier)
	(c_parser_direct_declarator, c_parser_direct_declarator_inner)
	(c_parser_compound_statement_nostart, c_parser_all_labels)
	(c_parser_label, c_parser_statement, c_parser_for_statement):
	Handle standard attributes.
	* c-parser.h (c_parser_declspecs): Update prototype.
	* gimple-parser.c (c_parser_gimple_declaration): Update call to
	c_parser_declspecs.

gcc/testsuite:
	* gcc.dg/c2x-attr-fallthrough-1.c, gcc.dg/c2x-attr-syntax-1.c,
	gcc.dg/c2x-attr-syntax-2.c, gcc.dg/c2x-attr-syntax-3.c,
	gcc.dg/gnu2x-attr-syntax-1.c, gcc.dg/gnu2x-attr-syntax-2.c,
	gcc.dg/gnu2x-attrs-1.c: New tests.

From-SVN: r278194

2019-11-14  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/91682
	* ipa-prop.h (jump_func_type): New value IPA_JF_LOAD_AGG.
	(ipa_load_agg_data, ipa_agg_value, ipa_agg_value_set): New structs.
	(ipa_agg_jf_item): Add new field jftype and type, redefine field value.
	(ipa_agg_jump_function): Remove member function equal_to.
	(ipa_agg_jump_function_p): Remove typedef.
	(ipa_copy_agg_values, ipa_release_agg_values): New functions.
	* ipa-prop.c (ipa_print_node_jump_functions_for_edge): Dump
	information for aggregate jump function.
	(get_ssa_def_if_simple_copy): Add new parameter rhs_stmt to
	record last definition statement.
	(load_from_unmodified_param_or_agg): New function.
	(ipa_known_agg_contents_list): Add new field type and value, remove
	field constant.
	(build_agg_jump_func_from_list): Rename parameter const_count to
	value_count, build aggregate jump function from ipa_load_agg_data.
	(analyze_agg_content_value): New function.
	(extract_mem_content): Analyze memory store assignment to prepare
	information for aggregate jump function generation.
	(determine_known_aggregate_parts): Add new parameter fbi, remove
	parameter aa_walk_budeget_p.
	(update_jump_functions_after_inlining): Update aggregate jump function.
	(ipa_find_agg_cst_for_param): Change type of parameter agg.
	(try_make_edge_direct_simple_call): Add new parameter new_root.
	(try_make_edge_direct_virtual_call): Add new parameter new_root and
	new_root_info.
	(update_indirect_edges_after_inlining): Pass new argument to
	try_make_edge_direct_simple_call and try_make_edge_direct_virtual_call.
	(ipa_write_jump_function): Write aggregate jump function to file.
	(ipa_read_jump_function): Read aggregate jump function from file.
	(ipa_agg_value::equal_to): Migrate from ipa_agg_jf_item::equal_to.
	* ipa-cp.c (ipa_get_jf_arith_result): New function.
	(ipa_agg_value_from_node): Likewise.
	(ipa_agg_value_set_from_jfunc): Likewise.
	(propagate_vals_across_arith_jfunc): Likewise.
	(propagate_aggregate_lattice): Likewise.
	(ipa_get_jf_pass_through_result): Call ipa_get_jf_arith_result.
	(propagate_vals_across_pass_through): Call
	propagate_vals_across_arith_jfunc.
	(get_clone_agg_value): Move forward.
	(propagate_aggs_across_jump_function): Handle value propagation for
	aggregate jump function.
	(agg_jmp_p_vec_for_t_vec): Remove.
	(context_independent_aggregate_values): Replace vec<ipa_agg_jf_item>
	with vec<ipa_agg_value>.
	(copy_plats_to_inter, intersect_with_plats): Likewise.
	(agg_replacements_to_vector, intersect_with_agg_replacements): Likewise.
	(intersect_aggregate_with_edge): Likewise.
	(find_aggregate_values_for_callers_subset): Likewise.
	(cgraph_edge_brings_all_agg_vals_for_node): Likewise.
	(estimate_local_effects): Replace vec<ipa_agg_jump_function> and
	vec<ipa_agg_jump_function_p> with vec<ipa_agg_value_set>.
	(gather_context_independent_values): Likewise.
	(perform_estimation_of_a_value, decide_whether_version_node): Likewise.
	* ipa-fnsummary.c (evaluate_conditions_for_known_args): Replace
	vec<ipa_agg_jump_function_p> with vec<ipa_agg_value_set>.
	(evaluate_properties_for_edge): Likewise.
	(estimate_edge_devirt_benefit): Likewise.
	(estimate_edge_size_and_time):  Likewise.
	(estimate_calls_size_and_time): Likewise.
	(ipa_call_context::ipa_call_context): Likewise.
	(estimate_ipcp_clone_size_and_time):  Likewise.
	* ipa-fnsummary.h (ipa_call_context): Replace
	vec<ipa_agg_jump_function_p> with vec<ipa_agg_value_set>.
	* ipa-inline-analysis.c (do_estimate_edge_time): Replace
	vec<ipa_agg_jump_function_p> with vec<ipa_agg_value_set>.
	(do_estimate_edge_size): Likewise.
	(do_estimate_edge_hints): Likewise.

2019-11-14  Feng Xue  <fxue@os.amperecomputing.com>

        PR ipa/91682
        * gcc.dg/ipa/ipcp-agg-10.c: Change dg-scan string.
        * gcc.dg/ipa/ipcp-agg-11.c: New test.

From-SVN: r278193

	PR ipa/92421
	* g++.dg/torture/pr92421.C: Add -Wno-return-type to
	dg-additional-options.  Avoid -Wwrite-string warnings, most of
	-Wreturn-type warnings, define bf ctor.  Use struct instead of class
	with public: at the start.

From-SVN: r278192

	* g++.dg/cpp0x/alias-decl-pr92206-3.C: Require effective target c++14
	rather than c++11.

From-SVN: r278191

	* gfortran.dg/ISO_Fortran_binding_17.c: Include
	../../../libgfortran/ISO_Fortran_binding.h rather than
	ISO_Fortran_binding.h.

From-SVN: r278190

From-SVN: r278189

	* ipa-cp.c (propagate_vr_across_jump_function): Propagate also across
	binary operations.

From-SVN: r278185

ipa-profile.c (check_argument_count): Check properly that e_info is non-NULL; do not check descriptors.

	* ipa-profile.c (check_argument_count): Check properly that e_info
	is non-NULL; do not check descriptors.

From-SVN: r278184

	* ipa-inline-analysis.c (do_estimate_edge_time): Relax
	check for ipa profiles.

From-SVN: r278179

	PR c++/92421
	* ipa-prop.c (update_indirect_edges_after_inlining):
	Mark parameter as used.
	* ipa-inline.c (recursive_inlining): Reset node cache
	after inlining.
	(inline_small_functions): Remove checking ifdef.
	* ipa-inline-analysis.c (do_estimate_edge_time): Verify
	cache consistency.
	* g++.dg/torture/pr92421.C: New testcase.

From-SVN: r278159

	PR ipa/92498
	* ipa-profile.c (check_argument_count): Do not ICE when descriptors
	is NULL.
	(ipa_profile): Fix reversed test.

From-SVN: r278157

	* ipa-cp.c (ignore_edge_p): Do not check caller flags.
	(propagate_constants_topo): Fix typo.

From-SVN: r278156

From-SVN: r278153

This was dormant for quite some time, but it started happening for me
on gcc.c-torture/compile/pr65153.c sometime after r276645 for -mabi=32 linux runs.

The pattern accepts any SMALL_OPERAND constant value while it asserts during the final
that the value is in the mode size range. I this case it happens that combine_and_move_insns
during ira makes a pattern with negative "shift count" which fails at final stage.

This simple fix just truncates the constant operand to mode size the same as shift patterns.

gcc/ChangeLog:

2019-11-13  Dragan Mladjenovic  <dmladjenovic@wavecomp.com>

	* config/mips/mips.md (rotr<mode>3): Sanitize the constant argument
	instead of asserting its value.

From-SVN: r278152

2019-11-13  Janne Blomqvist  <jb@gcc.gnu.org>

        * download_prerequisites: Use http instead of ftp for downloading.

From-SVN: r278151

        * gcc.target/powerpc/pr92090.c: Limit -mbig to powerpc64le-*-*.
        * gcc.target/powerpc/pr92090-2.c: Likewise.

From-SVN: r278150

This is incomplete because std::strong_order doesn't support
floating-point types.

The partial_order and weak_order tests use VERIFY instead of
static_assert because of PR 92431.

	* libsupc++/compare (strong_order, weak_order, partial_order)
	(compare_strong_order_fallback, compare_weak_order_fallback)
	(compare_partial_order_fallback): Define customization point objects
	for C++20.
	* testsuite/18_support/comparisons/algorithms/partial_order.cc: New
	test.
	* testsuite/18_support/comparisons/algorithms/strong_order.cc: New
	test.
	* testsuite/18_support/comparisons/algorithms/weak_order.cc: New test.

From-SVN: r278149

Rewrite value_range constructors to the value_range_kind is at the
end, and defaults to VR_RANGE.  Similarly for set() methods.

From-SVN: r278148

This is a complaint that we issue a [[nodiscard]] warning even in SFINAE
contexts.  Here 'complain' is tf_decltype, but not tf_warning so I guess
we can fix it as below.

	* cvt.c (convert_to_void): Guard maybe_warn_nodiscard calls with
	tf_warning.

	* g++.dg/cpp1z/nodiscard7.C: New test.

From-SVN: r278147

2019-11-13  Ulrich Drepper  <drepper@redhat.com>

	* tree-dump.c (dequeue_and_dump): Print first tree operand
	for VIEW_CONVERT_EXPR.

From-SVN: r278146

C2x adds <float.h> constants FLT_NORM_MAX, DBL_NORM_MAX and
LDBL_NORM_MAX.  These are for the maximum "normalized" finite
floating-point number, where the given definition of normalized is
that all possible values with MANT_DIG significand digits (leading one
not zero) can be represented with that exponent.  The effect of that
definition is that these macros are the same as the corresponding MAX
macros for all formats except IBM long double, where the NORM_MAX
value has exponent 1 smaller than the MAX one so that all 106 digits
can be 1.

This patch adds those macros to GCC.  They are only defined for float,
double and long double; C2x does not include such macros for DFP
types, and while the integration of TS 18661-3 into C2x has not yet
occurred, the draft proposed text does not add them for the _FloatN /
_FloatNx types (where they would always be the same as the MAX
macros).

Bootstrapped with no regressions on x86_64-pc-linux-gnu.  Also tested
compilation of the new test for powerpc-linux-gnu to confirm the check
of LDBL_NORM_MAX in the IBM long double case does get properly
optimized out.

gcc:
	* ginclude/float.c [__STDC_VERSION__ > 201710L] (FLT_NORM_MAX,
	DBL_NORM_MAX, LDBL_NORM_MAX): Define.
	* real.c (get_max_float): Add norm_max argument.
	* real.h (get_max_float): Update prototype.
	* builtins.c (fold_builtin_interclass_mathfn): Update calls to
	get_max_float.

gcc/c-family:
	* c-cppbuiltin.c (builtin_define_float_constants): Also define
	NORM_MAX constants.  Update call to get_max_float.
	(LAZY_HEX_FP_VALUES_CNT): Update value to include NORM_MAX
	constants.

gcc/d:
	* d-target.cc (define_float_constants): Update call to
	get_max_float.

gcc/testsuite:
	* gcc.dg/c11-float-3.c, gcc.dg/c2x-float-1.c: New tests.

From-SVN: r278145

2019-11-13  Martin Liska  <mliska@suse.cz>

	* dbgcnt.c (test_sorted_dbg_counters): New.
	(dbgcnt_c_tests): Likewise.
	* selftest-run-tests.c (selftest::run_tests): Likewise.
	* selftest.h (dbgcnt_c_tests): Likewise.

From-SVN: r278144

2019-11-13  Jan Hubicka  <hubicka@ucw.cz>
	    Martin Jambor  <mjambor@suse.cz>

	PR ipa/92454
	* ipa-cp.c (spread_undeadness): Check that IPA_NODE_REF exists.
	(identify_dead_nodes): Likewise.

	testsuite/
	* g++.dg/ipa/pr92454.C: New test.

From-SVN: r278142

2019-11-13  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (sem_function::equals_private): Do not overuse
	push/pop_cfun functions.

From-SVN: r278141

2019-11-13  Martin Liska  <mliska@suse.cz>

	* common.opt: Document change of -fdbg-cnt option.
	* dbgcnt.c (DEBUG_COUNTER): Remove.
	(dbg_cnt_is_enabled): Remove.
	(dbg_cnt): Work with new intervals.
	(dbg_cnt_set_limit_by_index): Set to new
	list of intervals.
	(dbg_cnt_set_limit_by_name): Likewise.
	(dbg_cnt_process_single_pair): Process new format.
	(dbg_cnt_process_opt): Likewise.
	(dbg_cnt_list_all_counters): Likewise.
	* doc/invoke.texi: Document change of -fdbg-cnt option.
	(cmp_tuples): New.
2019-11-13  Martin Liska  <mliska@suse.cz>

	* gcc.dg/ipa/ipa-icf-39.c: Update -fdbg-cnt to the new format.
	* gcc.dg/pr68766.c: Likewise.

From-SVN: r278140

	* ipa-inline.c (ipa_inline): Check that function is defined before
	flattening.
	* gcc.c-torture/compile/flatten.c: New testcase.

From-SVN: r278139

2019-11-13  Andrew Stubbs  <ams@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>

	libgomp/
	* plugin/Makefrag.am: Add amdgcn plugin support.
	* plugin/configfrag.ac: Likewise.
	* plugin/plugin-gcn.c: New file.
	* configure: Regenerate.
	* Makefile.in: Regenerate.
	* testsuite/Makefile.in: Regenerate.

Co-Authored-By: Julian Brown <julian@codesourcery.com>
Co-Authored-By: Kwok Cheung Yeung <kcy@codesourcery.com>
Co-Authored-By: Tom de Vries <tom@codesourcery.com>

From-SVN: r278138

2019-11-13  Andrew Stubbs  <ams@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>

	gcc/
	* config/gcn/gcn.c (gcn_goacc_validate_dims): Ensure
	flag_worker_partitioning is not set.
	(TARGET_GOACC_WORKER_PARTITIONING): Remove target hook definition.
	* config/gcn/gcn.opt (macc-experimental-workers): Default to off.

Co-Authored-By: Julian Brown <julian@codesourcery.com>

From-SVN: r278137

2019-11-13  Andrew Stubbs  <ams@codesourcery.com>

	libgomp/
	* config/gcn/team.c (gomp_gcn_enter_kernel): Set up the team arena
	and use team_malloc variants.
	(gomp_gcn_exit_kernel): Use team_free.
	* libgomp.h (TEAM_ARENA_SIZE): Define.
	(TEAM_ARENA_START): Define.
	(TEAM_ARENA_FREE): Define.
	(TEAM_ARENA_END): Define.
	(team_malloc): New function.
	(team_malloc_cleared): New function.
	(team_free): New function.
	* team.c (gomp_new_team): Initialize and use team_malloc.
	(free_team): Use team_free.
	(gomp_free_thread): Use team_free.
	(gomp_pause_host): Use team_free.
	* work.c (gomp_init_work_share): Use team_malloc.
	(gomp_fini_work_share): Use team_free.

From-SVN: r278136

2019-11-13  Andrew Stubbs  <ams@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>

	include/
	* gomp-constants.h (GOMP_DEVICE_GCN): Define.
	(GOMP_VERSION_GCN): Define.

	libgomp/
	* Makefile.am (libgomp_la_SOURCES): Add oacc-target.c.
	* Makefile.in: Regenerate.
	* config.h.in (PLUGIN_GCN): Add new undef.
	* config/accel/openacc.f90 (acc_device_gcn): New parameter.
	* config/gcn/affinity-fmt.c: New file.
	* config/gcn/bar.c: New file.
	* config/gcn/bar.h: New file.
	* config/gcn/doacross.h: New file.
	* config/gcn/icv-device.c: New file.
	* config/gcn/oacc-target.c: New file.
	* config/gcn/simple-bar.h: New file.
	* config/gcn/target.c: New file.
	* config/gcn/task.c: New file.
	* config/gcn/team.c: New file.
	* config/gcn/time.c: New file.
	* configure.ac: Add amdgcn*-*-*.
	* configure: Regenerate.
	* configure.tgt: Add amdgcn*-*-*.
	* libgomp-plugin.h (offload_target_type): Add OFFLOAD_TARGET_TYPE_GCN.
	* libgomp.h (gcn_thrs): Add amdgcn variant.
	(set_gcn_thrs): Likewise.
	(gomp_thread): Likewise.
	* oacc-int.h (goacc_thread): Likewise.
	* oacc-target.c: New file.
	* openacc.f90 (acc_device_gcn): New parameter.
	* openacc.h (acc_device_t): Add acc_device_gcn.
	* team.c (gomp_free_pool_helper): Add amdgcn support.

Co-Authored-By: Julian Brown <julian@codesourcery.com>
Co-Authored-By: Kwok Cheung Yeung <kcy@codesourcery.com>
Co-Authored-By: Tom de Vries <tom@codesourcery.com>

From-SVN: r278135

2019-11-13  Andrew Stubbs  <ams@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>

	libgomp/
	* libgomp-plugin.h (GOMP_OFFLOAD_openacc_async_construct): Add int
	parameter.
	* oacc-async.c (lookup_goacc_asyncqueue): Pass device number to the
	queue constructor.
	* oacc-host.c (host_openacc_async_construct): Add device parameter.
	* plugin/plugin-nvptx.c (GOMP_OFFLOAD_openacc_async_construct): Add
	device parameter.

Co-Authored-By: Julian Brown <julian@codesourcery.com>

From-SVN: r278134

2019-11-13  Andrew Stubbs  <ams@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>

	gcc/
	* config/gcn/mkoffload.c: New file.
	* config/gcn/offload.h: New file.

From-SVN: r278133

2019-11-13  Andrew Stubbs  <ams@codesourcery.com>

	libgomp/
	* configure.tgt (nvptx*-*-*): Add "accel" directory.
	* config/nvptx/libgomp-plugin.c: Move ...
	* config/accel/libgomp-plugin.c: ... to here.
	* config/nvptx/lock.c: Move ...
	* config/accel/lock.c: ... to here.
	* config/nvptx/mutex.c: Move ...
	* config/accel/mutex.c: ... to here.
	* config/nvptx/mutex.h: Move ...
	* config/accel/mutex.h: ... to here.
	* config/nvptx/oacc-async.c: Move ...
	* config/accel/oacc-async.c: ... to here.
	* config/nvptx/oacc-cuda.c: Move ...
	* config/accel/oacc-cuda.c: ... to here.
	* config/nvptx/oacc-host.c: Move ...
	* config/accel/oacc-host.c: ... to here.
	* config/nvptx/oacc-init.c: Move ...
	* config/accel/oacc-init.c: ... to here.
	* config/nvptx/oacc-mem.c: Move ...
	* config/accel/oacc-mem.c: ... to here.
	* config/nvptx/oacc-plugin.c: Move ...
	* config/accel/oacc-plugin.c: ... to here.
	* config/nvptx/omp-lock.h: Move ...
	* config/accel/omp-lock.h: ... to here.
	* config/nvptx/openacc.f90: Move ...
	* config/accel/openacc.f90: ... to here.
	* config/nvptx/pool.h: Move ...
	* config/accel/pool.h: ... to here.
	* config/nvptx/proc.c: Move ...
	* config/accel/proc.c: ... to here.
	* config/nvptx/ptrlock.c: Move ...
	* config/accel/ptrlock.c: ... to here.
	* config/nvptx/ptrlock.h: Move ...
	* config/accel/ptrlock.h: ... to here.
	* config/nvptx/sem.c: Move ...
	* config/accel/sem.c: ... to here.
	* config/nvptx/sem.h: Move ...
	* config/accel/sem.h: ... to here.
	* config/nvptx/thread-stacksize.h: Move ...
	* config/accel/thread-stacksize.h: ... to here.

From-SVN: r278132

2019-11-13  Andrew Stubbs  <ams@codesourcery.com>

	gcc/
	* config/gcn/gcn-run.c (heap_region): New global variable.
	(struct hsa_runtime_fn_info): Add hsa_memory_assign_agent_fn.
	(init_hsa_runtime_functions): Initialize hsa_memory_assign_agent.
	(get_kernarg_region): Move contents to ....
	(get_memory_region): .... here.
	(get_heap_region): New function.
	(init_device): Initialize the heap_region.
	(device_malloc): Add region parameter.
	(struct kernargs): Move heap ....
	(heap): ... to global scope.
	(main): Allocate heap separate to kernargs.

From-SVN: r278131

	* c-ada-spec.c (get_underlying_decl): Do not look through typedefs.
	(dump_forward_type): Do not generate a declaration for function types.
	(dump_nested_type) <ARRAY_TYPE>: Do not generate a nested declaration
	of the component type if it is declared in another file.

From-SVN: r278129

        libgfortran/
        PR fortran/92470
        * runtime/ISO_Fortran_binding.c (CFI_establish): Set lower_bound to 0
        also for CFI_attribute_other.

        gcc/testsuite/
        PR fortran/92470
        * gfortran.dg/ISO_Fortran_binding_1.c (establish_c): Add assert for
        lower_bound == 0.

From-SVN: r278128

	* ipa-prop.c (ipa_print_node_jump_functions,
	ipa_print_node_params): Print info about missing summaries.

From-SVN: r278127

	* configure.tgt (riscv64-*-linux*): Enable build.

From-SVN: r278126