2008-09-21  Laurent Guerby  <laurent@guerby.net>

        PR ada/5911
	* gcc-interface/Makefile.in: Add multilib handling for x86_64
	and sparc.
	* system-linux-sparcv9.ads: New file.
	
2008-09-21  Laurent Guerby  <laurent@guerby.net>
            Paolo Bonzini  <bonzini@gnu.org>
	
	PR ada/5911
	* Makefile.in (all, install, mostlyclean, clean, distclean): Add
	multilib handling.
	* configure.ac: Add multilib handling.
	* configure: Regenerate.


Co-Authored-By: Paolo Bonzini <bonzini@gnu.org>

From-SVN: r140525

2008-08-29  Laurent Guerby  <laurent@guerby.net>
	
	* Makefile.in (FLAGS_TO_PASS): renamed to LIBADA_FLAGS_TO_PASS to
	avoid conflicts. Factor more flags to pass.
	(libsubdir): New variable.
	(install-gnatlib): New target.

From-SVN: r139767

2008-08-28  Laurent Guerby  <laurent@guerby.net>

	* configure: Regenerate.

From-SVN: r139716

2008-08-06  Thomas Quinot  <quinot@adacore.com>

	* Makefile.in: generate s-oscons.ads again, previous change was
	unneeded.

From-SVN: r138872

    gcc/ada/
	* gcc-interface/Make-lang.in: Use GCC_FOR_TARGET when dealing
	with s-oscons-tmplt.i.

    libada/
	* Makefile.in: Pass FLAGS_TO_PASS to sub-make for target
	oscons.

From-SVN: r138800

2008-08-06  Thomas Quinot  <quinot@adacore.com>

	* Makefile.in: Now generate s-oscons-$(THREAD_KIND).

From-SVN: r138789

	* Makefile.in (gnatlib*): Now depend on oscons target.
	(oscons): New target.

From-SVN: r138706

gcc:
2008-08-01  Paolo Bonzini  <bonzini@gnu.org>

	* configure.ac: Do not generate libada-mk.  Do not subst
	host_cc_for_libada.
	* libada-mk.in: Remove.
	* Makefile.in: Pass TARGET_LIBGCC2_CFLAGS to libgcc.mvars.
	* configure: Regenerate.

libada:
2008-08-01  Paolo Bonzini  <bonzini@gnu.org>

	* configure.ac (warn_cflags): Substitute.
	* configure: Regenerate.
	* Makefile.in (libdir, WARN_CFLAGS): Substitute.
	(GCC_WARN_CFLAGS): Remove NOCOMMON_FLAG.
	(ADA_CFLAGS, T_ADA_CFLAGS, X_ADA_CFLAGS, ALL_ADA_CFLAGS): Remove,
	they were unused.
	(libada-mk): Do not include.  Include libgcc.mvars instead.
	(tmake_file): Remove, do not include.
	(FLAGS_TO_PASS): Pass dummy values for exeext and CC.
	* configure: Regenerate.

gnattools:
2008-08-01  Paolo Bonzini  <bonzini@gnu.org>

	* configure.ac (warn_cflags): Substitute.
	* configure: Regenerate.
	* Makefile.in (libdir, exeext, WARN_CFLAGS): Substitute.
	(GCC_WARN_CFLAGS): Remove NOCOMMON_FLAG.
	(ADA_INCLUDE_DIR, ADA_RTL_OBJ_DIR): Remove as they were unused.
	(libsubdir): Remove.
	(libada-mk): Do not include.  Include libgcc.mvars instead.
	(xmake_file): Remove, do not include.

From-SVN: r138479

	* Makefile.tpl ($(srcdir)/configure): Update dependencies.
	* Makefile.in: Regenerate.
	* configure: Regenerate.

config/
	* override.m4: Use m4_version_prereq throughout.
	(_AC_ARG_VAR_VALIDATE, AC_MSG_FAILURE): Backport from git
	Autoconf: output pwd along with fatal errors, so the right
	config.log file is hinted at more prominently.
	(PARSE_ARGS): Push setting of ac_pwd in this diversion.
	(_GCC_AUTOCONF_VERSION): New, define to 2.59 if not defined.
	(_GCC_AUTOCONF_VERSION_CHECK): New macro, require use of Autoconf
	version _GCC_AUTOCONF_VERSION throughout the tree.
	(m4_wrap): New override, fix for Posix semantics of m4wrap.

libgcc/
	* configure.ac: sinclude override.m4.
	* configure: Regenerate.

gnattools/
	* configure.ac: move sinclude of acx.m4 before AC_INIT,
	also sinclude override.m4.
	* Makefile.in ($(srcdir)/configure): Update dependencies.
	* configure: Regenerate.

libada/
	* configure.ac: move sinclude of acx.m4 before AC_INIT,
	also sinclude override.m4.
	* Makefile.in ($(srcdir)/configure): Update dependencies.
	* configure: Regenerate.

intl/
	* configure: Regenerate.

libiberty/
	* configure: Regenerate.

boehm-gc/
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* include/Makefile.in: Regenerate.
	* include/gc_config.h.in: Regenerate.

fixincludes/
	* configure: Regenerate.

gcc/
	* configure: Regenerate.

libcpp/
	* Makefile.in ($(srcdir)/aclocal.m4): Update dependencies.
	* configure: Regenerate.

libdecnumber/
	* Makefile.in ($(srcdir)/aclocal.m4): Update dependencies.
	* configure: Regenerate.

libffi/
	* configure: Regenerate.
	* include/Makefile.in: Regenerate.
	* testsuite/Makefile.in: Regenerate.

libgfortran/
	* configure: Regenerate.

libgomp/
	* configure: Regenerate.

libjava/classpath/
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* doc/Makefile.in: Regenerate.
	* doc/api/Makefile.in: Regenerate.
	* examples/Makefile.in: Regenerate.
	* external/Makefile.in: Regenerate.
	* external/jsr166/Makefile.in: Regenerate.
	* external/relaxngDatatype/Makefile.in: Regenerate.
	* external/sax/Makefile.in: Regenerate.
	* external/w3c_dom/Makefile.in: Regenerate.
	* include/Makefile.in: Regenerate.
	* lib/Makefile.in: Regenerate.
	* native/Makefile.in: Regenerate.
	* native/fdlibm/Makefile.in: Regenerate.
	* native/jawt/Makefile.in: Regenerate.
	* native/jni/Makefile.in: Regenerate.
	* native/jni/classpath/Makefile.in: Regenerate.
	* native/jni/gconf-peer/Makefile.in: Regenerate.
	* native/jni/gstreamer-peer/Makefile.in: Regenerate.
	* native/jni/gtk-peer/Makefile.in: Regenerate.
	* native/jni/java-io/Makefile.in: Regenerate.
	* native/jni/java-lang/Makefile.in: Regenerate.
	* native/jni/java-net/Makefile.in: Regenerate.
	* native/jni/java-nio/Makefile.in: Regenerate.
	* native/jni/java-util/Makefile.in: Regenerate.
	* native/jni/midi-alsa/Makefile.in: Regenerate.
	* native/jni/midi-dssi/Makefile.in: Regenerate.
	* native/jni/native-lib/Makefile.in: Regenerate.
	* native/jni/qt-peer/Makefile.in: Regenerate.
	* native/jni/xmlj/Makefile.in: Regenerate.
	* native/plugin/Makefile.in: Regenerate.
	* resource/Makefile.in: Regenerate.
	* scripts/Makefile.in: Regenerate.
	* tools/Makefile.in: Regenerate.

libjava/
	* configure: Regenerate.
	* gcj/Makefile.in: Regenerate.
	* include/Makefile.in: Regenerate.
	* testsuite/Makefile.in: Regenerate.

libjava/libltdl/
	* Makefile.in: Regenerate.
	* configure: Regenerate.

libmudflap/
	* Makefile.in: Regenerate.
	* config.h.in: Regenerate.
	* configure: Regenerate.
	* testsuite/Makefile.in: Regenerate.

libobjc/
	* configure: Regenerate.

libssp/
	* Makefile.in: Regenerate.
	* config.h.in: Regenerate.
	* configure: Regenerate.

libstdc++-v3/
	* configure: Regenerate.

zlib/
	* Makefile.in: Regenerate.
	* configure: Regenerate.

From-SVN: r136876

From-SVN: r122453

2007-01-23  Richard Guenther  <rguenther@suse.de>

	PR bootstrap/30541
	* Makefile.def (flags_to_pass): Add GNATBIND and GNATMAKE.
	* Makefile.tpl (GNATBIND): Substitute it.
	(GNATMAKE): Likewise.
	(POSTSTAGE1_FLAGS_TO_PASS): Pass staged GNATBIND instead
	of STAGE_PREFIX.
	* Makefile.in: Regenerate.
	* configure: Regenerate.

        config/
	* acx.m4 (ACX_PROG_GNAT): Check for gnatmake.

	libada/
	* Makefile.in (STAGE_PREFIX): Do not define.
	(FLAGS_TO_PASS): Do not pass STAGE_PREFIX.

	gnattools/
	* Makefile.in (STAGE_PREFIX): Do not define.

	ada/
	* Make-lang.in: Replace invocations of gnatmake with $(GNATMAKE).
	(gnatboot2): Pass staged GNATMAKE instead of STAGE_PREFIX.
	(gnatboot3): Likewise.
	(GNATBIND): Do not define.
	* Makefile.in (GNATBIND): Do not define.

From-SVN: r121082

2006-11-16  Paolo Bonzini  <bonzini@gnu.org>

	* Makefile.tpl (clean-target-libgcc): Test for gcc Makefile presence.
	(unstage): Test for stage_last presence.

	PR bootstrap/29802
	* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Add HOST_SUBDIR in STAGE_PREFIX.
	* Makefile.in: Regenerate.

libada:
2006-11-16  Paolo Bonzini  <bonzini@gnu.org>

	PR bootstrap/29802
	* configure.ac: Call GCC_TOPLEV_SUBDIRS.
	* configure: Regenerate.
	* Makefile.in: Replace host_subdir.

From-SVN: r118927

gcc/ada/
	* Makefile.in: Add TEXI2PDF definition.
	* Make-lang.in: Add "ada.pdf" target.
libada/
	* Makefile.in: Add dummy "pdf" target.

From-SVN: r117818

2006-05-23  Carlos O'Donell  <carlos@codesourcery.com>

	* Makefile.in: Add install-html target.

From-SVN: r114035

libada:
2005-12-05  Paolo Bonzini  <bonzini@gnu.org>

	* Makefile.in (FLAGS_TO_PASS): Add GCC_FOR_TARGET.

gcc/ada:
2005-12-05  Paolo Bonzini  <bonzini@gnu.org>

        * Makefile.in (gnatlib): Fix regex, using \. instead of . when
	a period is meant.

From-SVN: r108058

* Makefile.in (html): New.

From-SVN: r98906

2005-05-25  Paolo Bonzini  <bonzini@gnu.org>

	PR bootstrap/17383
	* Makefile.def (target_modules): Remove "stage", now unnecessary.
	* Makefile.tpl (HOST_SUBDIR): New substitution.
	(STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET,
	USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET,
	USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET,
	USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it.
	(Host modules, Bootstrapped modules): Use it.
	(Build modules, Target modules): Do not create symlink trees,
	always configure out-of-srcdir.
	(distclean): Try removing $(host_subdir) with rm before using rm -rf.
	* configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET,
	GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use
	$(HOST_SUBDIR).  Create a symlink for host_subdir.

	* Makefile.in: Regenerate.
	* configure: Regenerate.

config:
2005-05-25  Paolo Bonzini  <bonzini@gnu.org>

	PR bootstrap/17383
	* config/acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src
	gcc build is going.

gcc:
2005-05-25  Paolo Bonzini  <bonzini@gnu.org>

	PR bootstrap/17383
	* gcc/Makefile.in (host_subdir): New.
	(build_objdir): New.  Replace ../$(build_subdir) with it throughout.
	* gcc/configure: Regenerate.

libada:
2005-05-25  Paolo Bonzini  <bonzini@gnu.org>

	PR bootstrap/17383
	* Makefile.in (GCC_DIR): Add $(HOST_SUBDIR) to the definition.

libjava:
2005-05-25  Paolo Bonzini  <bonzini@gnu.org>

	PR bootstrap/17383
	* configure.ac: Call GCC_TOPLEV_SUBDIRS.
	(COMPPATH): Removed.
	(ZIP, GCJH): Replace it with ../$(host_subdir).
	(built_gcc_dir): Add $(host_subdir).
	* configure: Regenerate.
	* Makefile.in, include/Makefile.in, testsuite/Makefile.in,
	gcj/Makefile.in, external/Makefile.in, external/sax/Makefile.in,
	external/w3c_dom/Makefile.in: Regenerate.

libobjc:
2005-05-25  Paolo Bonzini  <bonzini@gnu.org>

	PR bootstrap/17383
	* configure.ac: Call GCC_TOPLEV_SUBDIRS.
	(Determine CFLAGS for gthread): Use $host_subdir.
	* configure: Regenerate.
	* Makefile.in (host_subdir): New.
	(INCLUDES): Use it.

From-SVN: r95680

	Merged from libada-gnattools-branch:
	2004-11-28  Nathanael Nerode  <neroden@gcc.gnu.org>

	* gnattools: New directory.
	* Makefile.def: Add gnattools as a module, depending on target-libada.
	* Makefile.in: Regenerate.
	* configure.in: Include gnattools in host_tools; disable it if ada
	is disabled.
	* configure: Regenerate.

(gcc)
	* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
	* configure: Regenerate.
        * libada-mk.in: Remove CC; rename
	cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.

(gcc/ada)
	Partial merge from libada-gnattools-branch:

	2004-12-02  Nathanael Nerode  <neroden@gcc.gnu.org>
        * Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
        into code in gnattools/Makefile.in.  Remove direct dependencies on
        stamp-tools by tools clauses.
	2004-12-02  Nathanael Nerode  <neroden@gcc.gnu.org>
        * config-lang.in: Add gnattools to $lang_dirs.

(libada)
2004-12-03  Nathanael Nerode  <neroden@gcc.gnu.org>

	* Makefile.in: Add stamp file for building libada, to avoid
	duplicate builds every time all-gnattools is called.

2004-12-02  Nathanael Nerode  <neroden@gcc.gnu.org>

	* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
	here.

2004-08-16  Nathanael Nerode  <neroden@gcc.gnu.org>

	* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
	_TARGET.
	* configure: Regenerate.

2004-07-18  Nathanael Nerode  <neroden@gcc.gnu.org>

	* configure.ac, Makefile.in: Remove gnattools-specific code
	(see gnattools directory).
	* Makefile.in: Remove dead rts-* targets.
	* configure: Regenerate.

(gnattools)
2005-02-02  Nathanael Nerode  <neroden@gcc.gnu.org>

        * Makefile.in: Remove use of cc_set_by_configure; just use
        plain old CC from the top level in this case.

2005-01-30  Nathanael Nerode  <neroden@gcc.gnu.org>
	Merge from mainline at tag libada-gnattools-merge-20050129:
	* configure.ac: Changes propagated from gcc/ada/Makefile.in.
	* Makefile.in: Changes relocated from gcc/ada/Makefile.in.

2004-12-13  Nathanael Nerode  <neroden@gcc.gnu.org>

        * Makefile.in: Reinstate stamp-gnatlib check.

2004-12-02  Nathanael Nerode  <neroden@gcc.gnu.org>

	* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
	gcc/ada/configure.ac into gnattools-native and gnattools-cross
	targets, collecting flags as appropriate from here,
	gcc/ada/Makefile.in, gcc/ada/configure.ac, etc.  Attempt to retain
	identical behavior.
	* configure.ac: Add necessary configure bits from
	gcc/ada/configure.ac.
	* configure: Regenerate.

2004-08-16  Nathanael Nerode  <neroden@gcc.gnu.org>

	* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
	_TARGET.  Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
	ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
	* configure: Regenerate.

2004-07-18  Nathanael Nerode  <neroden@gcc.gnu.org>

	* Makefile.in, configure.ac: Remove libada-specific targets and
	variables.
	* configure: Regenerate.
	* New directory, cloned from libada.

From-SVN: r95594

From-SVN: r82256

	* Makefile.in: Put back merge of some targets to avoid code duplication.
	Remove at the same obsolete variable GNATLIBLDFLAGS.

From-SVN: r81192

	* configure.ac: Fix stupid brain-fade; set default_gnattools_target
	correctly.
	* configure: Regenerate.

From-SVN: r81167

	* Makefile.in: Revert most of Arnaud's last change.  Prefer anything
	over error-prone Make abuse.  Remove temporary debug code.
	(gnatlib-zcx): New target.
	(gnattools): Split into gnattools-native, gnattools-cross, to fix
	previous bug; select which on the basis of default_gnattools_target.
	(ada.all.cross): Merged with gnattools-cross target.
	* configure.ac: Set default_gnattools_target.
	* configure: Regenerate.

From-SVN: r81128

	* Makefile.in: Fix errors introduced in previous change (in particular,
	errors when building gnattools were ignored).
	Code clean up and simplification.
	update comments.
	Remove temporary debug code introduced by mistake in previous check in.
	Prefer GNU Make syntax over complex and error-prone sh syntax.
	(gnatlib-zcx): New target.
	(ada.all.cross): Merged with gnattools-cross target.

From-SVN: r80857

	* configure.ac: It's gnatlib-plain in the Makefile, not
	gnatlib-simple; make configure match.
	* configure: Regenerate.

From-SVN: r80810

	* Makefile.in: Call gcc/ada/Makefile directly, not through the
	intermediary of gcc/Makefile.  Incorporate all necessary parts of
	rules from gcc/ada/Make-lang.in, including extra gnatlib/gnattools
	targets, rts-zfp, rts-ravenscar.  Get needed bits of GCC
	configuration from (new) gcc/libada-mk.  Decide what gnatlib variant
	to build in configure.ac, not here.
	* configure.ac: Provide Makefile.in with the new information it needs,
	such as GCC's tmake_file and xmake_file.
	* configure: Regenerate.

From-SVN: r80711

boehm-gc/
2004-03-10  Kelley Cook  <kcook@gcc.gnu.org>

	* configure.ac: Bump AC_PREREQ to 2.59.
	* configure: Regenerate.
	* config.in: Regenerate.

fastjar/
2004-03-10  Kelley Cook  <kcook@gcc.gnu.org>

	* configure.ac: Bump AC_PREREQ to 2.59.
	* configure: Regenerate.

intl/
2004-03-10  Kelley Cook  <kcook@gcc.gnu.org>

	* configure.ac: Bump AC_PREREQ to 2.59.
	* configure: Regenerate.
	* config.h.in: Regenerate.

gcc/
2004-03-10  Kelley Cook  <kcook@gcc.gnu.org>

	* configure.ac: Bump AC_PREREQ to 2.59.
	* configure: Regenerate.

libada/
2004-03-10  Kelley Cook  <kcook@gcc.gnu.org>

	* configure.in: Rename file to ...
	* configure.ac: .. to this. Bump AC_PREREQ to 2.59.
	* configure: Regenerate.

libjava/libltdl/
2004-03-10  Kelley Cook  <kcook@gcc.gnu.org>

	* configure.ac: Bump AC_PREREQ to 2.59.
	* configure: Regenerate.
	* config-h.in: Regenerate.

libstdc++-v3/
2004-03-10  Kelley Cook  <kcook@gcc.gnu.org>

	* configure.ac: Bump AC_PREREQ to 2.59.

contrib/
2004-03-10  Kelley Cook  <kcook@gcc.gnu.org>

	* gcc_update (files_and_dependencies): Insert libada/configure.

From-SVN: r79285

From-SVN: r78761

        PR ada/14350
        * configure.in: Remove hardcoded gcc version.

        * configure: Regenerated.

From-SVN: r78760

From-SVN: r77621

2003-02-10  Arnaud Charlet  <charlet@act-europe.fr>

	PR ada/6637, PR ada/5911
	* configure.in, Makefile.in, configure: Merge with libada-branch

From-SVN: r77592