./:	* common.opt: Add fstrict-overflow.
	* opts.c (decode_options): Set flag_strict_overflow if -O2.
	* flags.h (TYPE_OVERFLOW_WRAPS): Define.
	(TYPE_OVERFLOW_UNDEFINED): Define.
	(TYPE_OVERFLOW_TRAPS): Define.  This replaces TYPE_TRAP_SIGNED.
	Replace all uses.
	* tree.h (TYPE_TRAP_SIGNED): Don't define.
	* fold-const.c (negate_expr_p): Use TYPE_OVERFLOW_UNDEFINED.
	(fold_negate_expr): Likewise.
	(make_range): Likewise.
	(extract_muldiv_1): Likewise.
	(maybe_canonicalize_comparison): Likewise.
	(fold_comparison): Likewise.
	(fold_binary): Likewise.
	(tree_expr_nonnegative_p): Likewise.
	(tree_expr_nonzero_p): Likewise.
	* tree-vrp.c (compare_values): Likewise.
	(extract_range_from_binary_expr): Likewise.
	(extract_range_from_unary_expr): Likewise.
	* tree-ssa-loop-niter.c (infer_loop_bounds_from_signedness):
	Likewise.
	(nowrap_type_p): Likewise.
	* tree-scalar-evolution.c (simple_iv): Likewise.
	* fold-const.c (negate_expr_p): Use TYPE_OVERFLOW_WRAPS.
	(build_range_check): Likewise.
	(extract_muldiv_1): Likewise.
	(fold_comparison): Likewise.
	* tree-vrp.c (vrp_int_const_binop): Likewise.
	(extract_range_from_unary_expr): Likewise.
	* convert.c (convert_to_integer): Likewise.
	* fold-const.c (fold_negate_expr): Use TYPE_OVERFLOW_TRAPS.
	(fold_comparison): Likewise.
	(fold_binary): Likewise.
	* optabs.c (optab_for_tree_code): Likewise.
	* tree-vectorizer.c (vect_is_simple_reduction): Likewise.
	* simplify-rtx.c (simplify_const_relational_operation): Check
	flag_strict_overflow and flag_trapv.
	(simplify_const_relational_operation): Likewise.
	* doc/invoke.texi (Option Summary): Mention -fstrict-overflow.
	(Optimize Options): Add -fstrict-overflow to -O2 list.  Document
	-fstrict-overflow.
testsuite/:
	* gcc.dg/strict-overflow-1.c: New test.
	* gcc.dg/no-strict-overflow-1.c: New test.
	* gcc.dg/strict-overflow-2.c: New test.
	* gcc.dg/no-strict-overflow-2.c: New test.
	* gcc.dg/strict-overflow-3.c: New test.
	* gcc.dg/no-strict-overflow-3.c: New test.
	* gcc.dg/strict-overflow-4.c: New test.
	* gcc.dg/no-strict-overflow-4.c: New test.
	* gcc.dg/fold-mod-1.c: Add -fstrict-overflow option.
	* gcc.dg/pr15784-1.c: Likewise.
	* gcc.dg/pr20922-1.c: Likewise.
	* gcc.dg/pr20922-3.c: Likewise.
	* gcc.dg/pr20922-4.c: Likewise.
	* gcc.dg/pr20922-6.c: Likewise.
	* gcc.dg/compare-4.c: Likewise.
	* gcc.dg/torture/pr26898-1.c: Likewise.
	* gcc.dg/tree-ssa/divide-1.c: Likewise.
	* gcc.dg/tree-ssa/divide-2.c: Likewise.
	* gcc.dg/tree-ssa/divide-3.c: Likewise.
	* gcc.dg/tree-ssa/divide-4.c: Likewise.
	* gcc.dg/tree-ssa/pr14490-1.c: Likewise.
	* gcc.dg/tree-ssa/pr14490-3.c: Likewise.
	* gcc.dg/tree-ssa/pr21082.c: Likewise.
	* gcc.dg/tree-ssa/pr26899.c: Likewise.
	* g++.dg/tree-ssa/pr21082.C: Likewise.

From-SVN: r121254

	* doc/sourcebuild.texi: Add comma for clarity.
	* doc/extend.texi: Fix some typos.
	* doc/passes.texi: Likewise.
	* doc/cppinternals.texi: Likewise.
	* doc/c-tree.texi: Likewise.
	* doc/tree-ssa.texi: Likewise.

From-SVN: r121241

2007-01-25  Richard Guenther  <rguenther@suse.de>

	* doc/invoke.texi (-Wcoverage-mismatch): Document.
	* common.opt (-Wcoverage-mismatch): New warning option.
	* coverage.c (get_coverage_counts): Ignore coverage mismatch
	if -Wcoverage-mismatch is given.

	* gcc.dg/tree-prof/tree-prof.exp: Define _PROFILE_GENERATE
	and _PROFILE_USE.
	* gcc.dg/tree-prof/wcoverage-mismatch.c: New testcase.

From-SVN: r121169

2007-01-24  Douglas Gregor  <dgregor@osl.iu.edu>

	* c-common.h (RID_FIRST_CXX0X): New.
	(RID_LAST_CXX0X): New.
	* c-opts.c (c_common_handle_option): -Wc++0x-compat is triggered
	by -Wall.
	* c.opt (Wc++0x-compat): New.
	* doc/invoke.texi (-Wc++0x-compat): Document.

From-SVN: r121162

	* ipa-inline.c (initial_insns, max_insns): Delete.
	(compute_max_insns): New function.
	(cgraph_decide_inlining_of_small_function): Use it; take minimal amount
	of insns as base for code growth.
	(cgraph_decide_inlining): Make initial_insns local; do not compute
	max_insns.
	* params.def (PARAM_INLINE_UNIT_GROWTH): Set to 60.
	* doc/invoke.texi (inline-unit-growth): Update docs.

From-SVN: r121144

	* target.h (globalize_decl_name): New.
	* target-def.h (TARGET_ASM_GLOBALIZE_DECL_NAME): New.
	* output.h (default_globalize_decl_name): New.
	* varasm.c (asm_output_bss): Use globalize_decl_name instead of
	globalize_label.
        (globalize_decl): Ditto.
	(default_globalize_decl_name): New.
	* config/ia64/ia64.c (ia64_globalize_decl_name): New.
	(ia64_handle_version_id_attribute): New.
	(TARGET_ASM_GLOBALIZE_DECL_NAME): New.
	(ia64_asm_output_external): Use globalize_decl_name instead
	of globalize_label.
	* doc/extend.texi (version_id): New pragma.
	* doc/tm.texi (ARGET_ASM_GLOBALIZE_DECL_NAME): New target hook.

From-SVN: r121128

2007-01-24  Andreas Krebbel  <krebbel1@de.ibm.com>

	* c-cppbuiltin.c (builtin_define_type_sizeof): New function.
	(c_cpp_builtins): New builtin macros: __SIZEOF_INT__, __SIZEOF_LONG__,
	__SIZEOF_LONG_LONG__, __SIZEOF_SHORT__, __SIZEOF_POINTER__,
	__SIZEOF_FLOAT__, __SIZEOF_DOUBLE__, __SIZEOF_LONG_DOUBLE__,
	__SIZEOF_SIZE_T__, __SIZEOF_WCHAR_T__, __SIZEOF_WINT_T__ and
	__SIZEOF_PTRDIFF_T__.
	* doc/cpp.texi: Documentation for the new builtin macros added.

2007-01-24  Andreas Krebbel  <krebbel1@de.ibm.com>

	* gcc.c-torture/compile/sizeof-macros-1.c: New testcase.

From-SVN: r121107

	* doc/invoke.texi (-fdump-rtl-combine): Fix under/overfull hbox.
	(-fdump-rtl-stack): Likewise.
	(-fno-signed-zeros): Use @minus{} for a minus sign.  Correct typo.
	(-mcheck-zero-division, -mcpu): Fix under/overfull hbox.
	(-mpt-fixed): Use @minus{} for minus sign.
	(Using Precompiled Headers): Fix under/overfull hbox.


Co-Authored-By: Joseph Myers <joseph@codesourcery.com>

From-SVN: r121023

	* common.opt (fsigned-zeros): New command line option.
	* flags.h (HONOR_SIGNED_ZEROS): Control via flag_signed_zeros instead
	of flag_unsafe_math_optimizations.
	* opts.c (set_fast_math_flags): The -ffast-math command line option
	implies -fno-signed-zeros.
	(fast_math_flags_set_p): Likewise.

	* doc/invoke.texi: Document new -fno-signed-zeros option, and update
	the documentation of -ffast-math appropriately.  Wrap long lines.

	* gcc.dg/pr30172-1.c: Specify the -fno-signed-zeros command line
	option instead of -funsafe-math-optimizations.

From-SVN: r120978

2007-01-19  Basile Starynkevitch  <basile@starynkevitch.net>

	* gcc/doc/gty.texi (Options): Document the mark_hook option to
	GTY.
	* gcc/gengtype.c (write_types_data, write_func_for_structure,
	write_types, ggc_wtd, pch_wtd): Added skip_hooks to
	write_types_data, ggc_wtd, pch_wtd for mark_hook.
	(walk_type, write_func_for_structure): Generate the mark_hook if
	needed.

	* MAINTAINERS: added myself (Basile Starynkevitch) to write after
	approval.

From-SVN: r120973

2007-01-19  Richard Guenther  <rguenther@suse.de>

	* doc/tm.texi (TARGET_HAS_SINCOS): Document new target macro.
	* defaults.h (TARGET_HAS_SINCOS): Default to off.
	* config/linux.h (TARGET_HAS_SINCOS): Set to on if we have glibc.
	* config/alpha/linux.h (TARGET_HAS_SINCOS): Likewise.
	* config/sparc/linux.h (TARGET_HAS_SINCOS): Likewise.
	* config/sparc/linux64.h (TARGET_HAS_SINCOS): Likewise.
	* config/rs6000/linux.h (TARGET_HAS_SINCOS): Likewise.
	* config/rs6000/linux64.h (TARGET_HAS_SINCOS): Likewise.

From-SVN: r120952

gcc/
200x-xx-xx  Kazu Hirata  <kazu@codesourcery.com>
	    Richard Sandiford  <richard@codesourcery.com>

	* doc/tm.texi (TARGET_FUNCTION_VALUE): Expand documentation of
	parallels.
	* calls.c (expand_call): If the return value is a PARALLEL,
	extract its first member.
	* config/m68k/linux.h (FUNCTION_EXTRA_EPILOGUE): Remove.
	* config/m68k/m68k.c (m68k_output_function_epilogue): Don't
	use FUNCTION_EXTRA_EPILOGUE.
	(m68k_function_value): Return a PARALLEL if the return value
	is of a pointer type.
	* config/m68k/netbsd-elf.h (current_function_returns_pointer)
	(FUNCTION_EXTRA_EPILOGUE): Remove.
	* config/m68k/m68k.md (D0_REG): New constant.

Co-Authored-By: Richard Sandiford <richard@codesourcery.com>

From-SVN: r120929

From-SVN: r120909

2007-01-18  Dirk Mueller  <dmueller@suse.de>
·           Richard Guenther <rguenther@suse.de>

·       PR diagnostic/8268
·       * doc/invoke.texi (Warray-bounds): Document -Warray-bounds.
·       * common.opt (Warray-bounds): Add new warning option.
·       * c-opts.c (c_common_handle_option): Define -Warray-bounds
·       if -Wall is given.
        * Makefile.in: make tree-vrp.o depend on toplev.h
·       * tree-vrp.c (vrp_finalize): Call check_array_refs if -Warray-bounds
·       is enabled.
·       (check_array_refs, check_array_bounds, check_array_ref): New.

·       * gcc.dg/Warray-bounds.c: New testcase.
        * gcc.dg/Warray-bounds-2.c: New testcase.
        * g++.dg/warn/Warray-bounds.C: New testcase.
        * g++.dg/warn/Warray-bounds-2.C: New testcase.

From-SVN: r120898

	* doc/sourcebuild.texi (libgcj Tests): Use sourceware.org.
	* doc/install.texi (Testing): Use sourceware.org.
	(Binaries): Likewise.
	(Specific): Likewise.
	* doc/contrib.texi (Contributors): Use sourceware.org.

From-SVN: r120873

gcc
	* doc/sourcebuild.texi (libgcj Tests): Don't mention jacks.
	* doc/install.texi (Testing): Don't mention jacks.
	(Configuration): Document --enable-java-maintainer-mode.  Move
	--with-java-home to libgcj-specific section.  Document
	--with-ecj-jar.
	(Prerequisites): Mention --enable-java-maintainer-mode, ecj1.
contrib
	* download_ecj: New file.

From-SVN: r120802

        * param.h (MIN_VECT_LOOP_BOUND): New.
        * params.def (MIN_VECT_LOOP_BOUND): New.
        * tree-vectorizer.c (slpeel_tree_peel_loop_to_edge): Takes another
        argument - minimum threshold for number of iterations.
        * tree-vectorizer.h (slpeel_tree_peel_loop_to_edge): Add another
        argument to declaration.
        * tree-vect-analyze.c (vect_analyze_operations): Check value of
        MIN_VECT_LOOP_BOUND.
        * tree-vect-transform.c (vect_do_peeling_for_loop_bound): Call
        slpeel_tree_peel_loop_to_edge with additional argument.
        (vect_do_peeling_for_alignment): Likewise.
        * doc/invoke.texi (min-vect-loop-bound): Document new param option.

From-SVN: r120770

	* doc/loop.texi: Document recording of loop exits.
	* cfgloopmanip.c (loopify, duplicate_loop): Use alloc_loop.
	(update_single_exits_after_duplication,
	update_single_exit_for_duplicated_loop,
	update_single_exit_for_duplicated_loops): Removed.
	(duplicate_loop_to_header_edge): Do not call
	update_single_exits_after_duplication and
	update_single_exit_for_duplicated_loops.
	(loop_version): Do not update single_exit information.
	(fix_loop_structure): Use record_loop_exits instead of
	mark_single_exit_loops.
	* tree-ssa-loop-manip.c (tree_transform_and_unroll_loop): Update
	the lists of loop exits.
	* cfghooks.c (redirect_edge_and_branch, redirect_edge_and_branch_force,
	split_edge, merge_blocks): Update the lists of loop exits.
	* modulo-sched.c (sms_schedule): Pass LOOPS_HAVE_RECORDED_EXITS to
	loop_optimizer_init.
	* loop-init.c (loop_optimizer_init): Call record_loop_exits instead
	of mark_single_exit_loops.
	(loop_optimizer_finalize): Call release_recorded_exits.
	* tree-ssa-loop.c (tree_loop_optimizer_init): Pass
	LOOPS_HAVE_RECORDED_EXITS to loop_optimizer_init.
	* tree-vectorizer.c (slpeel_tree_duplicate_loop_to_edge_cfg): Do not
	update single exit information.
	* lambda-code.c (perfect_nestify): Ditto.
	* cfgloop.c (flow_loop_free): Destroy the list of exits of the loop.
	(mark_single_exit_loops): Removed.
	(alloc_loop, loop_exit_hash, loop_exit_eq, loop_exit_free,
	get_exit_descriptions, rescan_loop_exit, record_loop_exits,
	dump_recorded_exit, dump_recorded_exits, release_recorded_exits): New
	functions.
	(get_loop_exit_edges, single_exit): Use recorded exit lists.
	(add_bb_to_loop, remove_bb_from_loops): Update the lists of loop exits.
	(verify_loop_structure): Verify consistency of the exit lists.
	(flow_loops_find): Use alloc_loop.  Initialize exits hash.
	(set_single_exit): Removed.
	* cfgloop.h (struct loop_exit): New function.
	(struct loop): single_exit_ field replaced by exits field.
	(LOOPS_HAVE_MARKED_SINGLE_EXITS): Replaced by LOOPS_HAVE_RECORDED_EXITS.
	(struct loops): Added exits hash.
	(mark_single_exit_loops, set_single_exit): Declaration removed.
	(release_recorded_exits, record_loop_exits, rescan_loop_exit): Declare.

From-SVN: r120728

gcc/
	* doc/invoke.texi: Avoid use of @headitem.

From-SVN: r120726

gcc/
	* doc/install.texi: Fix m68k-*-* anchor and add m68k-*-* to the
	list of targets.

From-SVN: r120718

gcc/
200x-xx-xx  Nathan Sidwell  <nathan@codesourcery.com>
	    Richard Sandiford  <richard@codesourcery.com>

	* doc/invoke.texi: Document -mno-bitfield, -mno-rtd and -mno-short.
	* config/m68k/m68k.opt: Resort options.
	(mbitfield, mrtd, mshort): Remove RejectNegative properties.

Co-Authored-By: Richard Sandiford <richard@codesourcery.com>

From-SVN: r120717

gcc/
200x-xx-xx  Nathan Sidwell  <nathan@codesourcery.com>
	    Richard Sandiford  <richard@codesourcery.com>

	* doc/invoke.texi: Document the macros that are defined by
	m68k's -mtune and -mhard-float options.
	* config/m68k/m68k-protos.h (m68k_cpp_cpu_ident) Declare.
	(m68k_cpp_cpu_family): Likewise.
	* config/m68k/m68k.h (TARGET_CPU_CPP_BUILTINS): Add a full set
	of __ucfv*__ macros.  Define __mcffpu__ if generating code for
	ColdFire FPUs.  Define __mcf_cpu_* and __mcf_family_* macros.
	* config/m68k/m68k.c (m68k_cpp_cpu_ident): New function.
	(m68k_cpp_cpu_family): Likewise.

Co-Authored-By: Richard Sandiford <richard@codesourcery.com>

From-SVN: r120716

gcc/
200x-xx-xx  Julian Brown  <julian@codesourcery.com>
	    Nathan Sidwell  <nathan@codesourcery.com>
	    Richard Sandiford  <richard@codesourcery.com>

	* config.gcc (m680[012]0-*-*, m68k*-*-*): Set m68k_cpu_ident to
	the -mcpu= argument associated with the --with-cpu setting.
	Define M68K_DEFAULT_TUNE to the default -mtune= option,
	if different from the one implied by the -mcpu setting.
	Accept --with-cpu=FOO if FOO is listed in m68k-devices.def,
	using mcpu=FOO as the default CPU option.  Set target_cpu_default2.
	* doc/invoke.texi: Mention ColdFire in the introduction to the
	m68k options.  Document the new -march, -mcpu, -mtune, -mdiv,
	-mno-div and -mhard-float options.  Make -m68881 a synonym for
	-mhard-float.  Document the previously-undocumented -m5206e,
	-m528x, -m5307 and -m5407 options.  Tweak the existing option
	documentation for consistency.
	* doc/install.texi: Mention new --with-cpu arguments.
	* config/m68k/m68k.h (OPTION_DEFAULT_SPECS): Only use the
	default CPU if neither -mcpu nor -march are specified.
	(ASM_CPU_SPEC): Pass down -mcpu and -march options.
	(TARGET_CPU_CPP_BUILTINS): Set __mcfisa*__ macros from
	TARGET_ISA*.  Set the legacy __mcf*__ cpu macros in the same way,
	using m68k_tune to decide between families that implement the
	same ISA.  Use m68k_tune to set __mcfv4e__.
	(FL_BITFIELD, FL_68881, FL_COLDFIRE, FL_CF_HWDIV, FL_CF_MAC)
	(FL_CF_EMAC, FL_CF_EMAC_B, FL_CF_USP, FL_CF_FPU, FL_ISA_68000)
	(FL_ISA_68010, FL_ISA_68020, FL_ISA_68040, FL_ISA_A, FL_ISA_B)
	(FL_ISA_C, FL_ISA_MMU): New macros.
	(MASK_COLDFIRE): Delete.
	(TARGET_68010, TARGET_68020, TARGET_68040_ONLY, TARGET_COLDFIRE)
	(TARGET_ISAB): Redefine in terms of m68k_cpu_flags.
	(TARGET_68881, TARGET_COLDFIRE_FPU): Redefine in terms of m68k_fpu.
	(TARGET_HARD_FLOAT): Do not define here.
	(TARGET_ISAAPLUS, TARGET_ISAC): New macros.
	(TUNE_68000): New macro.
	(TUNE_68000_10): Redefine in terms of TUNE_68000 and TUNE_68010.
	(TUNE_68010, TUNE_68030, TUNE_68040, TUNE_68060, TUNE_CPU32)
	(TUNE_CFV2): Redefine in terms of m68k_tune.
	(uarch_type, target_device, fpu_type): New enums.
	(m68k_cpu, m68k_tune, m68k_fpu, m68k_cpu_flags): Declare.
	* config/m68k/m68k.c (TARGET_DEFAULT): Remove MASK_68881.
	(FL_FOR_isa_00, FL_FOR_isa_10, FL_FOR_isa_20, FL_FOR_isa_40)
	(FL_FOR_isa_cpu32, FL_FOR_isa_a, FL_FOR_isa_aplus, FL_FOR_isa_b)
	(FL_FOR_isa_c): New macros.
	(m68k_isa): New enum.
	(m68k_target_selection): New structure.
	(all_devices, all_isas, all_microarchs): New tables.
	(m68k_cpu_entry, m68k_arch_entry, m68k_tune_entry, m68k_cpu)
	(m68k_tune, m68k_fpu, m68k_cpu_flags): New variables.
	(MASK_ALL_CPU_BITS): Delete.
	(m68k_find_selection): New function.
	(m68k_handle_option): Handle -mcpu=, -march= and -mtune=.
	Map the legacy target options to a combination of the new ones.
	(override_options): Set m68k_cpu, m68k_tune, m68k_fpu and
	m68k_cpu_flags.  Handle M68K_DEFAULT_TUNE.  Use m68k_cpu_flags
	to derive default MASK_BITFIELD, MASK_CF_HWDIV and MASK_HARD_FLOAT
	settings.
	* config/m68k/m68k.opt (m5200, m5206e, m528x, m5307, m5407, mcfv4e)
	(m68010, m68020, m68020-40, m68020-60, m68030, m68040): Remove Mask
	properties.
	(m68881, msoft-float): Change mask from 68881 to HARD_FLOAT.
	(march=, mcpu=, mdiv, mhard-float, mtune=): New options.
	* config/m68k/m68k-devices.def: New file.

Co-Authored-By: Nathan Sidwell <nathan@codesourcery.com>
Co-Authored-By: Richard Sandiford <richard@codesourcery.com>

From-SVN: r120713

gcc/
200x-xx-xx  Nathan Sidwell  <nathan@codesourcery.com>
	    Richard Sandiford  <richard@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>

	* config.gcc (m68k-*-aout*, m68k-*-coff*, m68020-*-elf*, m68k-*-elf*)
	(m68k-*-uclinux*, m68k-*-linux*, m68k-*-rtems*): Set default_m68k_cpu
	to the configuration's default CPU.
	(m68010-*-netbsdelf*, m68k*-*-netbsdelf*, m68k*-*-openbsd*): Likewise.
	Remove default masks.
	(m680[012]0-*-*): Set the default with_cpu to the first part of
	the target name.
	(m68k*-*-*): Set the default with_cpu to m$default_m68k_cpu.
	(m68k*-*-linux): Extend the --with-cpu handling to...
	(m680[012]0-*-*, m68k*-*-*): ...these configurations.  Allow m68000
	and m68010.  Don't set target_cpu_default2.
	* doc/install.texi: Document --with-cpu for m68k.
	* config/m68k/m68k.h (OPTION_DEFAULT_SPECS): Define.
	* config/m68k/m68k-none.h (TARGET_CPU_DEFAULT, M68K_CPU_m68k)
	(M68K_CPU_m68000, M68K_CPU_m68010, M68K_CPU_m68020, M68K_CPU_m68030)
	(M68K_CPU_m68040, M68K_CPU_m68302, M68K_CPU_m68332, TARGET_DEFAULT)
	(ASM_CPU_DEFAULT_SPEC, CC1_CPU_DEFAULT_SPEC): Delete.
	(ASM_SPEC): Remove use of %(asm_cpu_default).
	(EXTRA_SPECS, SUBTARGET_EXTRA_SPECS, MULTILIB_DEFAULTS): Delete.
	* config/m68k/linux.h (TARGET_DEFAULT): Delete.
	(CPP_SPEC): Merge definitions.  Do not handle __HAVE_68881__ here.
	* config/m68k/netbsd-elf.h (TARGET_OS_CPP_BUILTINS): Define
	__HAVE_FPU__ if TARGET_HARD_FLOAT.
	(TARGET_DEFAULT): Delete.
	(EXTRA_SPECS): Delete cpp_cpu_default_spec, cpp_cpu_spec,
	cpp_fpu_spec, asm_default_spec and netbsd_cpp_spec.
	(CPP_CPU_SPEC): Delete.
	(TARGET_VERSION): Merge definitions, using TARGET_68010 to pick
	the appropriate string.
	(CPP_CPU_DEFAULT_SPEC, ASM_DEFAULT_SPEC, CPP_FPU_SPEC): Delete.
	(CPP_SPEC): Define to NETBSD_CPP_SPEC.
	(ASM_SPEC): Don't use %(asm_default_spec).
	* config/m68k/m68k.c (TARGET_DEFAULT_TARGET_FLAGS): Remove
	TARGET_DEFAULT and add MASK_68881.
	* config/m68k/m68k.md: Remove mention of TARGET_DEFAULT from comments.

Co-Authored-By: Julian Brown <julian@codesourcery.com>
Co-Authored-By: Richard Sandiford <richard@codesourcery.com>

From-SVN: r120711

gcc/
	* config.gcc (m68010-*-netbsdelf*): Add MASK_68010.
	(m68k*-*-netbsdelf*, m68k*-*-openbsd*, m68k*-linux*): Add
	MASK_68010 alongside MASK_68020.
	* doc/invoke.texi: Document -m68010.
	* config/m68k/m68k.opt (m68010): New.
	* config/m68k/m68k.h (TARGET_CPU_CPP_BUILTINS): Define mc68010
	if TUNE_68010.
	(TUNE_68010): New macro.
	* config/m68k/m68k-none.h (M68K_CPU_m68k, M68K_CPU_m68010)
	(M68K_CPU_m68020, M68K_CPU_m68030, M68K_CPU_m68040)
	(M68K_CPU_m68332): Add MASK_68010.
	* config/m68k/linux.h (TARGET_DEFAULT): Add MASK_68010 to
	fallback definition.
	* config/m68k/netbsd-elf.h (CPP_CPU_SPEC): Remove now-redundant
	defines.
	* config/m68k/m68k.c (MASK_ALL_CPU_BITS): Add MASK_68010.
	(m68k_handle_option): Handle OPT_m68010.  Add MASK_68010
	to all entries that use MASK_68020.
	(output_move_simode_const, output_move_himode, output_move_qimode)
	(output_move_stricthi, output_move_strictqi): Use TARGET_68010
	instead of TARGET_68020 to select clr behavior.  Remove comment
	about there being no TARGET_68010.
	* config/m68k/m68k.md: Likewise throughout.

From-SVN: r120710

	* doc/cppopts.texi <-MT>: Update description of algorithm for
	computing default target.
	<-M, -MD>: Reword "basename" text.

From-SVN: r120679

2007-01-11  Paolo Bonzini  <bonzini@gnu.org>

	* configure.ac (strict1_warn): Rename to strict_warn.
	(WERROR, --enable-werror, symlink hacks, stage1_cflags,
	cc_set_by_configure, quoted_cc_set_by_configure,
	stage_prefix_set_by_configure, quoted_stage_prefix_set_by_configure,
	all_boot_languages, all_stagestuff): Remove.
	(target_list): Remove bootstrap targets.
	* Makefile.in (quickstrap): Unconditionally make a synonym of all.
	(BOOT_LANGUAGES, STAGE1_CFLAGS, STAGE1_CHECKING,
	REMAKEFLAGS, FLAGS_TO_PASS, PREPEND_DOTDOT_TO_RELATIVE_PATHS,
	SUBDIR_FLAGS_TO_PASS, WERROR_FLAGS, STRICT2_WARN, LANG_STAGESTUFF,
	VOL_FILES, POSTSTAGE1_FLAGS_TO_PASS, STAGE2_FLAGS_TO_PASS,
	STAGEPROFILE_FLAGS_TO_PASS, STAGEFEEDBACK_FLAGS_TO_PASS, stage1_build,
	stage1_copy, stage2_build, stage2_copy, stageprofile_build,
	stageprofile_copy, stage3_build, stage3_copy, stagefeedback_build,
	stagefeedback_copy, stage4_build, clean_s1, clean_sw, bootstrap,
	bootstrap-lean, bootstrap2, bootstrap2-lean, bootstrap3,
	bootstrap3-lean, bootstrap4, bootstrap4-lean, unstage1, unstage2,
	unstage3, unstage4, unstageprofile, unstagefeedback, restage, restage2,
	restage3, restage4, restageprofile, restagefeedback, bubbleestrap,
	cleanstrap, unstrap, restrap, *compare, *compare3, *compare4,
	*compare-lean, *compare3-lean, *compare4-lean, stage1-start, stage1,
	stage2-start, stage2, stage3-start, stage3, stage4-start, stage4,
	stageprofile-start, stageprofile, stagefeedback-start, stagefeedback,
	risky-stage1, risky-stage2, risky-stage3, risky-stage4): Remove.
	(ORDINARY_FLAGS_TO_PASS): Rename to FLAGS_TO_PASS.
	(STAGECOPYSTUFF, STAGEMOVESTUFF): Consolidate into MOSTLYCLEANFILES.
	(mostlyclean): Adjust.
	(clean, distclean): Don't mention bootstrap stuff.
	* configure: Regenerate.
	* ada/config-lang.in, cp/config-lang.in, forttran/config-lang.in,
	java/config-lang.in, objc/config-lang.in, objcp/config-lang.in,
	treelang/config-lang.in (stagestuff): Remove.
	* doc/sourcebuild.texi (stage1, stage2, stage3, stage4,
	stageprofile, stagefeedback, stagestuff): Remove mention.

From-SVN: r120670

gcc/

2007-01-09  Carlos O'Donell  <carlos@codesourcery.com>

	* doc/tm.texi: Update documentation to reflect reality of exec
	and start file search behaviours. Update copyright year.
	* doc/invoke.texi: Explain how GCC_EXEC_PREFIX is used to find
	header file directories.

From-SVN: r120622

2007-01-08  Geoffrey Keating  <geoffk@apple.com>

	* target.h (struct gcc_target): New field library_rtti_comdat.
	* target-def.h (TARGET_CXX_LIBRARY_RTTI_COMDAT): New.
	(TARGET_CXX): Add TARGET_CXX_LIBRARY_RTTI_COMDAT.
	* doc/tm.texi (C++ ABI): Document TARGET_CXX_LIBRARY_RTTI_COMDAT.
	* config/darwin.h (TARGET_CXX_LIBRARY_RTTI_COMDAT): Define.

Index: testsuite/ChangeLog
2007-01-08  Geoffrey Keating  <geoffk@apple.com>

	* g++.dg/rtti/darwin-builtin-linkage.C: New.

Index: cp/ChangeLog
2007-01-08  Geoffrey Keating  <geoffk@apple.com>

	* rtti.c: Include target.h.
	(emit_support_tinfos): If ! targetm.cxx.library_rtti_comdat (),
	don't emit typeinfo for fundamental types as weak.
	* Make-lang.in (cp/rtti.o): Update and correct dependencies.

From-SVN: r120611

From-SVN: r120609

	* genautomata.c (STATS_OPTION): New option.
	(stats_flag): New flag.
	(gen_automata_option): Handle it.
	(initiate_automaton_gen): Ditto.
	(write_automata): Output statistics only if stats_flag is
	set. Likewise, output time statistics only if time_flag is set.
	* doc/md.texi (Processor pipeline description): Document new flag.

From-SVN: r120594

	gcc/
	* c.opt: Add -flax-vector-conversions.
	* c-typeck.c (convert_for_assignment): Pass flag to
	vector_types_convertible_p to allow emission of note.
	(digest_init): Likewise.
	(comptypes_internal): Use vector_types_convertible_p.
	* c-opts.c: Handle -flax-vector-conversions.
	* c-common.c (flag_lax_vector_conversions): New.
	(vector_types_convertible_p): Unless -flax-vector conversions
	has been passed, disallow conversions between vectors with
	differing numbers of subparts and/or element types.  If such
	a conversion is disallowed, possibly emit a note on the first
	occasion only to inform the user of -flax-vector-conversions.
	The new last argument specifies this.
	* c-common.h (flag_lax_vector_conversions): New.
	(vector_types_convertible_p): Add extra argument.
	* config/i386/i386.c (ix86_init_mmx_sse_builtins): Use
	char_type_node for V*QI type vectors.
	* config/rs6000/rs6000-c.c (altivec_overloaded_builtins):
	Update to satisfy new typechecking rules.
	* config/rs6000/altivec.h (vec_cmple): Use vec_cmpge.
	* doc/invoke.texi (C Dialect Options): Document
	-flax-vector-conversions.

	gcc/cp/
	* call.c (standard_conversion): Pass flag to
	vector_types_convertible_p to disallow emission of note.
	* typeck.c (convert_for_assignment): Pass flag to
	vector_types_convertible_p to allow emission of note.
	(ptr_reasonably_similar): Pass flag to vector_types_convertible_p
	to disallow emission of note.

	gcc/testsuite/
	* gcc.target/i386/20020531-1.c: Use "char" not "unsigned char"
	in __v8qi typedef.
	* gcc.target/powerpc/altivec-vec-merge.c (foo): Add casts.
	* gcc.dg/simd-1.c: Update dg-error directives to reflect new
	compiler behaviour.
	* gcc.dg/simd-5.c: Likewise.
	* gcc.dg/simd-6.c: Likewise.
	* g++.dg/conversion/simd1.C: Likewise.
	* g++.dg/conversion/simd3.C: Likewise.
	* g++.dg/ext/attribute-test-2.C (data): Add "vs" member.
	(main): Use it.

From-SVN: r120572

	* config/arm/arm.c, config/arm/arm.h, config/arm/arm.md,
	config/arm/thumb2.md: Fix comment typos.
	* doc/extend.texi: Fix a typo.

From-SVN: r120566

2007-01-05  Benjamin Kosnik  <bkoz@redhat.com>

	* c-cppbuiltin.c (c_cpp_builtins): __GXX_EXPERIMENTAL_CPP0X__ to
	__GXX_EXPERIMENTAL_CXX0X__.
	* doc/cpp.texi: Same.

From-SVN: r120502

        * doc/install.texi (Final install): Document the fact that
        the GNAT runtime should not be stripped.

From-SVN: r120484

./	* Makefile.def (target_modules): Add libgcc.
	(lang_env_dependencies): Remove default items.  Use no_c and no_gcc.
	* Makefile.tpl (clean-target-libgcc): Delete.
	(configure-target-[+module+]): Emit --disable-bootstrap dependencies
	on gcc even for bootstrapped modules.  Rewrite handling of
	lang_env_dependencies to loop over target_modules.
	* configure.in (target_libraries): Add target-libgcc.
	* Makefile.in, configure: Regenerated.
gcc/
	* config.gcc: Mention libgcc/config.host.
	* Makefile.in: Update comments mentioning libgcc.
	(LIBGCC, INSTALL_LIBGCC, GCC_PARTS, mklibgcc): Delete.
	(all.cross, start.encap, rest.encap, rest.cross): Update
	dependencies for libgcc move.
	(libgcc.mk, LIBGCC_DEPS, libgcov.a, libgcc.a, stmp-multilib)
	(clean-target, clean-target-libgcc): Delete.
	(srcdirify, GCC_EXTRA_PARTS): New macros.
	(libgcc-support, libgcc.mvars): New rules.
	(distclean): Remove mention of mklibgcc.
	(install): Don't reference INSTALL_LIBGCC.
	(install-common): Don't reference EXTRA_PARTS.
	(install-libgcc, install-multilib): Delete rules.
	* mklibgcc.in: Delete file.
	* doc/configfiles.texi: Don't mention mklibgcc.

	* config/i386/t-darwin (SHLIB_VERPFX): Delete (moved to libgcc).
	* config/i386/t-darwin64 (SHLIB_VERPFX): Likewise.
	* config/rs6000/t-darwin (SHLIB_VERPFX): Likewise.
	* config/rs6000/t-ppccomm (TARGET_LIBGCC2_CFLAGS, SHLIB_MAPFILES)
	(mklibgcc, ldblspecs): Likewise.

	* config/i386/t-nwld (libgcc.def, libc.def, libpcre.def)
	(posixpre.def): Use $(T).
	(SHLIB_EXT, SHLIB_NAME, SHLIB_SLIBDIR_QUAL, SHLIB_DEF, SHLIB_MAP)
	(SHLIB_SRC, SHLIB_INSTALL): Delete.
	(SHLIB_LINK): Make dummy.
	* config/t-slibgcc-darwin: Delete contents except for dummy SHLIB_LINK.

	* config/frv/t-linux (EXTRA_MULTILIB_PARTS): Clear.

	* config/alpha/t-crtfm: Use $(T) in rules for EXTRA_PARTS.
	* config/alpha/t-vms, config/alpha/t-vms64, config/fr30/t-fr30,
	config/i386/t-rtems-i386, config/ia64/t-ia64, config/rs6000/t-beos,
	config/rs6000/t-newas, config/sparc/t-elf: Likewise.

	* configure.ac (all_outputs): Remove mklibgcc.
	* configure: Regenerated.
libgcc/
	* Makefile.in, config/i386/t-darwin, config/i386/t-darwin64,
	config/i386/t-nwld, config/rs6000/t-darwin, config/rs6000/t-ldbl128,
	config/i386/t-crtfm, config/alpha/t-crtfm, config/ia64/t-ia64,
	config/sparc/t-crtfm, config/t-slibgcc-darwin,
	config/rs6000/t-ppccomm, config.host, configure.ac, empty.mk,
	shared-object.mk, siditi-object.mk, static-object.mk: New files.
	* configure: Generated.

Co-Authored-By: Paolo Bonzini <bonzini@gnu.org>

From-SVN: r120429

2007-01-03  Paul Brook  <paul@codesourcery.com>

	Merge from sourcerygxx-4_1.
	gcc/
	* config/arm/thumb2.md: New file.
	* config/arm/elf.h (JUMP_TABLES_IN_TEXT_SECTION): Return True for
	Thumb-2.
	* config/arm/coff.h (JUMP_TABLES_IN_TEXT_SECTION): Ditto.
	* config/arm/aout.h (ASM_OUTPUT_ADDR_VEC_ELT): Add !Thumb-2 assertion.
	(ASM_OUTPUT_ADDR_DIFF_ELT): Output Thumb-2 jump tables.
	* config/arm/aof.h (ASM_OUTPUT_ADDR_DIFF_ELT): Output Thumb-2 jump
	tables.
	(ASM_OUTPUT_ADDR_VEC_ELT): Add !Thumb-2 assertion.
	* config/arm/ieee754-df.S: Use macros for Thumb-2/Unified asm
	comptibility.
	* config/arm/ieee754-sf.S: Ditto.
	* config/arm/arm.c (thumb_base_register_rtx_p): Rename...
	(thumb1_base_register_rtx_p): ... to this.
	(thumb_index_register_rtx_p): Rename...
	(thumb1_index_register_rtx_p): ... to this.
	(thumb_output_function_prologue): Rename...
	(thumb1_output_function_prologue): ... to this.
	(thumb_legitimate_address_p): Rename...
	(thumb1_legitimate_address_p): ... to this.
	(thumb_rtx_costs): Rename...
	(thumb1_rtx_costs): ... to this.
	(thumb_compute_save_reg_mask): Rename...
	(thumb1_compute_save_reg_mask): ... to this.
	(thumb_final_prescan_insn): Rename...
	(thumb1_final_prescan_insn): ... to this.
	(thumb_expand_epilogue): Rename...
	(thumb1_expand_epilogue): ... to this.
	(arm_unwind_emit_stm): Rename...
	(arm_unwind_emit_sequence): ... to this.
	(thumb2_legitimate_index_p, thumb2_legitimate_address_p,
	thumb1_compute_save_reg_mask, arm_dwarf_handle_frame_unspec,
	thumb2_index_mul_operand, output_move_vfp, arm_shift_nmem,
	arm_save_coproc_regs, thumb_set_frame_pointer, arm_print_condition,
	thumb2_final_prescan_insn, thumb2_asm_output_opcode, arm_output_shift,
	thumb2_output_casesi): New functions.
	(TARGET_DWARF_HANDLE_FRAME_UNSPEC): Define.
	(FL_THUMB2, FL_NOTM, FL_DIV, FL_FOR_ARCH6T2, FL_FOR_ARCH7,
	FL_FOR_ARCH7A, FL_FOR_ARCH7R, FL_FOR_ARCH7M, ARM_LSL_NAME,
	THUMB2_WORK_REGS): Define.
	(arm_arch_notm, arm_arch_thumb2, arm_arch_hwdiv, arm_condexec_count,
	arm_condexec_mask, arm_condexec_masklen)): New variables.
	(all_architectures): Add armv6t2, armv7, armv7a, armv7r and armv7m.
	(arm_override_options): Check new CPU capabilities.
	Set new architecture flag variables.
	(arm_isr_value): Handle v7m interrupt functions.
	(user_return_insn): Return 0 for v7m interrupt functions.  Handle
	Thumb-2.
	(const_ok_for_arm): Handle Thumb-2 constants.
	(arm_gen_constant): Ditto.  Use movw when available.
	(arm_function_ok_for_sibcall): Return false for v7m interrupt
	functions.
	(legitimize_pic_address, arm_call_tls_get_addr): Handle Thumb-2.
	(thumb_find_work_register, arm_load_pic_register,
	legitimize_tls_address, arm_address_cost, load_multiple_sequence,
	emit_ldm_seq, emit_stm_seq, arm_select_cc_mode, get_jump_table_size,
	print_multi_reg, output_mov_long_double_fpa_from_arm,
	output_mov_long_double_arm_from_fpa, output_mov_double_fpa_from_arm,
	output_mov_double_fpa_from_arm, output_move_double,
	arm_compute_save_reg_mask, arm_compute_save_reg0_reg12_mask,
	output_return_instruction, arm_output_function_prologue,
	arm_output_epilogue, arm_get_frame_offsets, arm_regno_class,
	arm_output_mi_thunk, thumb_set_return_address): Ditto.
	(arm_expand_prologue): Handle Thumb-2.  Use arm_save_coproc_regs.
	(arm_coproc_mem_operand): Allow POST_INC/PRE_DEC.
	(arithmetic_instr, shift_op): Use arm_shift_nmem.
	(arm_print_operand): Use arm_print_condition.  Handle '(', ')', '.',
	'!' and 'L'.
	(arm_final_prescan_insn): Use extract_constrain_insn_cached.
	(thumb_expand_prologue): Use thumb_set_frame_pointer.
	(arm_file_start): Output directive for unified syntax.
	(arm_unwind_emit_set): Handle stack alignment instruction.
	* config/arm/lib1funcs.asm: Remove default for __ARM_ARCH__.
	Add v6t2, v7, v7a, v7r and v7m.
	(RETLDM): Add Thumb-2 code.
	(do_it, shift1, do_push, do_pop, COND, THUMB_SYNTAX): New macros.
	* config/arm/arm.h (TARGET_CPU_CPP_BUILTINS): Define __thumb2__.
	(TARGET_THUMB1, TARGET_32BIT, TARGET_THUMB2, TARGET_DSP_MULTIPLY,
	TARGET_INT_SIMD, TARGET_UNIFIED_ASM, ARM_FT_STACKALIGN, IS_STACKALIGN,
	THUMB2_TRAMPOLINE_TEMPLATE, TRAMPOLINE_ADJUST_ADDRESS,
	ASM_OUTPUT_OPCODE, THUMB2_GO_IF_LEGITIMATE_ADDRESS,
	THUMB2_LEGITIMIZE_ADDRESS, CASE_VECTOR_PC_RELATIVE,
	CASE_VECTOR_SHORTEN_MODE, ADDR_VEC_ALIGN, ASM_OUTPUT_CASE_END,
	ADJUST_INSN_LENGTH): Define.
	(TARGET_REALLY_IWMMXT, TARGET_IWMMXT_ABI, CONDITIONAL_REGISTER_USAGE,
	STATIC_CHAIN_REGNUM, HARD_REGNO_NREGS, INDEX_REG_CLASS,
	BASE_REG_CLASS, MODE_BASE_REG_CLASS, SMALL_REGISTER_CLASSES,
	PREFERRED_RELOAD_CLASS, SECONDARY_OUTPUT_RELOAD_CLASS,
	SECONDARY_INPUT_RELOAD_CLASS, LIBCALL_VALUE, FUNCTION_VALUE_REGNO_P,
	TRAMPOLINE_SIZE, INITIALIZE_TRAMPOLINE, HAVE_PRE_INCREMENT,
	HAVE_POST_DECREMENT, HAVE_PRE_DECREMENT, HAVE_PRE_MODIFY_DISP,
	HAVE_POST_MODIFY_DISP, HAVE_PRE_MODIFY_REG, HAVE_POST_MODIFY_REG,
	REGNO_MODE_OK_FOR_BASE_P, LEGITIMATE_CONSTANT_P,
	REG_MODE_OK_FOR_BASE_P, REG_OK_FOR_INDEX_P, GO_IF_LEGITIMATE_ADDRESS,
	LEGITIMIZE_ADDRESS, THUMB2_LEGITIMIZE_ADDRESS,
	GO_IF_MODE_DEPENDENT_ADDRESS, MEMORY_MOVE_COST, BRANCH_COST,
	ASM_APP_OFF, ASM_OUTPUT_CASE_LABEL, ARM_DECLARE_FUNCTION_NAME,
	FINAL_PRESCAN_INSN, PRINT_OPERAND_PUNCT_VALID_P,
	PRINT_OPERAND_ADDRESS): Adjust for Thumb-2.
	(arm_arch_notm, arm_arch_thumb2, arm_arch_hwdiv): New declarations.
	* config/arm/arm-cores.def: Add arm1156t2-s, cortex-a8, cortex-r4 and
	cortex-m3.
	* config/arm/arm-tune.md: Regenerate.
	* config/arm/arm-protos.h: Update prototypes.
	* config/arm/vfp.md: Enable patterns for Thumb-2.
	(arm_movsi_vfp): Add movw alternative.  Use output_move_vfp.
	(arm_movdi_vfp, movsf_vfp, movdf_vfp): Use output_move_vfp.
	(thumb2_movsi_vfp, thumb2_movdi_vfp, thumb2_movsf_vfp,
	thumb2_movdf_vfp, thumb2_movsfcc_vfp, thumb2_movdfcc_vfp): New.
	* config/arm/libunwind.S: Add Thumb-2 code.
	* config/arm/constraints.md: Update include Thumb-2.
	* config/arm/ieee754-sf.S: Add Thumb-2/Unified asm support.
	* config/arm/ieee754-df.S: Ditto.
	* config/arm/bpabi.S: Ditto.
	* config/arm/t-arm (MD_INCLUDES): Add thumb2.md.
	* config/arm/predicates.md (low_register_operand,
	low_reg_or_int_operand, thumb_16bit_operator): New.
	(thumb_cmp_operand, thumb_cmpneg_operand): Rename...
	(thumb1_cmp_operand, thumb1_cmpneg_operand): ... to this.
	* config/arm/t-arm-elf: Add armv7 multilib.
	* config/arm/arm.md: Update patterns for Thumb-2 and Unified asm.
	Include thumb2.md.
	(UNSPEC_STACK_ALIGN, ce_count): New.
	(arm_incscc, arm_decscc, arm_umaxsi3, arm_uminsi3,
	arm_zero_extendsidi2, arm_zero_extendqidi2): New
	insns/expanders.
	* config/arm/fpa.md: Update patterns for Thumb-2 and Unified asm.
	(thumb2_movsf_fpa, thumb2_movdf_fpa, thumb2_movxf_fpa,
	thumb2_movsfcc_fpa, thumb2_movdfcc_fpa): New insns.
	* config/arm/cirrus.md: Update patterns for Thumb-2 and Unified asm.
	(cirrus_thumb2_movdi, cirrus_thumb2_movsi_insn,
	thumb2_cirrus_movsf_hard_insn, thumb2_cirrus_movdf_hard_insn): New
	insns.
	* doc/extend.texi: Document ARMv7-M interrupt functions.
	* doc/invoke.texi: Document Thumb-2 new cores+architectures.

From-SVN: r120408

2007-01-02  Manuel Lopez-Ibanez  <manu@gcc.gnu.org>

	PR middle-end/7651
	* c.opt (Wold-style-declaration): New.
	* doc/invoke.texi (C-only Warning Options): New.
	(Wold-style-declaration): Document it.
	(Wextra): Enabled by -Wextra.
	* c-opts.c (c_common_post_options): Enabled by -Wextra.
	* c-decl.c (declspecs_add_scspec): Replace -Wextra with
	-Wold-style-declaration.

testsuite/
	* gcc.dg/declspec-3.c: Replace -W with -Wold-style-declaration.
	* gcc.dg/declspec-3-Wextra.c: New.
	* gcc.dg/declspec-3-no.c: New

From-SVN: r120347

c-common.c (c_common_nodes_and_builtins): Since variants of void_type_node get built before it is given a name...

2007-01-02  Douglas Gregor  <doug.gregor@gmail.com>

	* c-common.c(c_common_nodes_and_builtins): Since variants of
	void_type_node get built before it is given a name, we need to
	give those variants the name, too. 
	(complete_array_type): We need to work with the canonical main
	type of the array, from which we will build the qualified version.
	* params.def (PARAM_VERIFY_CANONICAL_TYPES): New.
	* print-tree.c (print_node): Display canonical type information
	for each type.
	* stor-layout.c (layout_type): When we don't know the
	alignment of a type for which we're building an array, we end up
	guessing wrong, so make the type require structural equality.
	* tree.c (make_node_stat): When we build a new type, it is its
	own canonical type.
	(build_type_attribute_qual_variant): When building an attribute
	variant, its canonical type is the non-attribute variant. However,
	if the attributes are target-dependent and they differ, we need to
	use structural equality checks for this type.
	(build_qualified_type): A qualified type is not equivalent to its
	unqualified variant; set the canonical type appropriately.
	(build_distinct_type_copy): When building a distinct type from
	another type, the new type is its own canonical type.
	(build_variant_type_copy): When building a new type variant, we
	assume that it is equivalent to the original type.
	(build_pointer_type_for_mode): When building a pointer type, also
	build a canonical type pointer.
	(build_reference_type_for_mode): When building a reference type,
	also build a canonical type reference.
	(build_index_type): When we can't hash an index type (e.g.,
	because its maximum value is negative), the index type requires
	structural equality tests.
	(build_array_type): Build the canonical form of an array type.
	(build_function_type): Function types require structural equality,
	because they contain default arguments, attributes, etc. 
	(build_method_type_directly): Ditto for method types.
	(build_offset_type): Build the canonical offset type.
	(build_complex_type): Build the canonical vector type.
	(make_vector_type): Build the canonical vector type.
	* tree.h (TYPE_CANONICAL): New.
	(TYPE_STRUCTURAL_EQUALITY_P): New.
	(SET_TYPE_STRUCTURAL_EQUALITY): New.
	(struct tree_type): Added "canonical" field.
	* params.h (VERIFY_CANONICAL_TYPES): New.
	* doc/c-tree.texi (TYPE_CANONICAL): Document.
	(TYPE_STRUCTURAL_EQUALITY_P): Document.
	(SET_TYPE_STRUCTURAL_EQUALITY): Document.
	* doc/invoke.texi (verify-canonical-types): Document --param
	parameter for verifying canonical types.
	
2007-01-02  Douglas Gregor  <doug.gregor@gmail.com>

	* typeck.c (structural_comptypes): Renamed from "comptypes".
	(comptypes): Use canonical type information to perform fast type
	comparison. When VERIFY_CANONICAL_TYPES, verify that the
	canonical type comparison returns the same results as we would see
	from the current, structural check. Support COMPARE_STRUCTURAL
	when we need structural checks.
	* decl.c (typename_compare): Fix comment.
	(build_typename_type): TYPENAME_TYPE nodes require structural
	equality checks, because they resolve different based on the
	current class type.
	(make_unbound_class_template): UNBOUND_CLASS_TEMPLATE nodes
	require structural equality checks (for now).
	(build_ptrmemfunc_type): Build the canonical pointer to member
	function type.
	(compute_array_index_type): Whenever we build a new index type
	to represent the size of an array in a template, we need to mark
	this index type as requiring structural equality. This goes for
	arrays with value-dependent sizes with the current ABI, or all
	arrays with ABI-1.
	* tree.c (cplus_array_hash): New.
	(struct cplus_array_info): New.
	(cplus_array_compare): New.
	(cplus_array_htab): New.
	(build_cplus_array_type_1): Use a hash table to cache the array
	types we build. Build the canonical array type for each array
	type.
	(cp_build_qualified_type_real): When building a cv-qualified array
	type, use the hash table of array types and build canonical array
	types as necessary.
	(bind_template_template_parm): BOUND_TEMPLATE_TEMPLATE_PARM nodes
	use structural equality (for now).
	* cp-tree.h (COMPARE_STRUCTURAL): New.
	* pt.c (canonical_template_parms): New.
	(canonical_type_parameter): New.
	(process_template_parm): Find the canonical type parameter.
	(lookup_template_class): When we have named the primary template
	type, set the canonical type for our template class to the primary
	template type. If any of the template arguments need structural
	equality checks, the template class needs structural equality
	checks.
	(tsubst): When reducing the level of a template template
	parameter, we require structural equality tests for the resulting
	parameter because its template parameters have not had their types
	canonicalized. When reducing a template type parameter, find the
	canonical reduced type parameter.
	(any_template_arguments_need_structural_equality_p): New.

2007-01-02  Douglas Gregor  <doug.gregor@gmail.com>
	
	* objc-act.c (objc_build_volatilized_type): Keep track of
	canonical types.
	(objc_get_protocol_qualified_type): Ditto.

From-SVN: r120341

2006-12-29  Marcin Dalecki  <martin@dalecki.de>

	* doc/invoke.texi: Replace no longer supported -fno-strength-reduce
	with -fmerge-constants in sample code.

From-SVN: r120253