Skip to content

R
riscv-gcc-1
Commit f871d7bf by Toon Moene Committed by Toon Moene
Options

Makefile.in: Change dependencies on stamp files into dependencies on the generated .la files. 

2001-11-13  Toon Moene  <toon@moene.indiv.nluug.nl>

	* Makefile.in: Change dependencies on stamp files
	into dependencies on the generated .la files.
	Get rid of objlist.  Update comment.
	* libF77/Makefile.in: Ditto.
	* libI77/Makefile.in: Ditto.
	* libU77/Makefile.in: Ditto.

From-SVN: r46970
parent 0f658c83
Showing with 30 additions and 59 deletions
libf2c/ChangeLog
2001-11-13 Toon Moene <toon@moene.indiv.nluug.nl>
* Makefile.in: Change dependencies on stamp files
into dependencies on the generated .la files.
Get rid of objlist. Update comment.
* libF77/Makefile.in: Ditto.
* libI77/Makefile.in: Ditto.
* libU77/Makefile.in: Ditto.
2001-10-20 Hans-Peter Nilsson <hp@bitrange.com>
* configure.in: Fake AC_EXEEXT invocation.
......
libf2c/Makefile.in
......@@ -117,36 +117,24 @@ all: all-unilib
# meant to be invoked via multi-do for multilibs.
# Its dependencies can be satisfied in parallel. The [fiu]77 targets
# update stamp files (see the subdir makefiles) which the $(LIBG2C)
# target checks in the sub make to decide whether to run ar/ranlib.
# (Probably only one stamp file is really needed.) The stamp files
# s-lib[fiu]77 are intentionally not targets, since we're only meant
# to come in at the level of this target. The [fiu]77 targets always
# invoke sub makes to check dependencies in the subdirs, else we'd
# always invoke sub makes to check dependencies in the subdirs, else we'd
# have to maintain them at this level; we live with the overhead of
# some recursive makes which may do nothing.
all-unilib: i77 f77 u77 s-libe77
all-unilib: i77 f77 u77 libE77.la
$(MAKE) $(FLAGS_TO_PASS) $(LIBG2C)
i77 f77 u77: g2c.h
# This target should normally only get invoked via `all-unilib' --
# after all's well in the subdirs -- actually to assemble the library.
# The stamp file dependencies are just to check whether libg2c.a is
# up-to-date (to avoid running ar regardless) -- the files should
# always have been created by a successful `all-unilib'.
$(LIBG2C): s-libi77 s-libf77 s-libu77 s-libe77
$(LIBG2C): libF77.la libI77.la libU77.la libE77.la
rm -f $@ ;\
set -e; \
rm -f objlist ;\
touch objlist ;\
for i in $(F2CEXT); do objs="$$objs libE77/L$$i.lo"; done ;\
echo -n $$objs > objlist
$(LIBTOOL) --mode=link $(CC) -o $@ \
-version-info $(VERSION_MAJOR):$(VERSION_MINOR):$(VERSION_SUB) \
-rpath $(prefix)/lib `cat objlist` libF77.la libI77.la libU77.la -lc -lm
-rpath $(prefix)/lib libE77.la libF77.la libI77.la libU77.la -lc -lm
i77:
cd libI77; $(MAKE) $(FLAGS_TO_PASS) all
......@@ -157,7 +145,8 @@ f77:
u77:
cd libU77; $(MAKE) $(FLAGS_TO_PASS) all
s-libe77: f2cext.c
libE77.la: f2cext.c
rm -f $@
if [ -d libE77 ]; then rm -f libE77/*.o libE77/*.lo; else mkdir libE77; fi
for name in $(F2CEXT); \
do \
......@@ -167,7 +156,7 @@ s-libe77: f2cext.c
-o libE77/L$${name}.o ; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
done
echo timestamp >s-libe77
$(LIBTOOL) --mode=link $(CC) -o libE77.la libE77/*.lo
f2cext.c: g2c.h
......@@ -230,7 +219,7 @@ mostlyclean:
rm -f $(LIBG2C) objlist
$(MAKE) DO=$@ DODIRS="$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do; \
$(MULTICLEAN) multi-clean DO=$@
rm -fr libE77 s-libe77
rm -fr libE77 libE77.la
clean: mostlyclean
rm -f config.log
......@@ -239,7 +228,7 @@ clean: mostlyclean
rm -rf .libs
distclean: clean
rm -f g2c.h s-libe77
rm -f g2c.h libE77.la
$(MAKE) DO=$@ DODIRS="$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do; \
$(MULTICLEAN) multi-clean DO=distclean
rm -f config.cache config.status Makefile
......
libf2c/libF77/Makefile.in
......@@ -52,7 +52,7 @@ ALL_CFLAGS = -I. -I$(srcdir) -I$(G2C_H_DIR) -I$(F2C_H_DIR) $(CPPFLAGS) $(DEFS) $
.c.lo:
@LIBTOOL@ --mode=compile $(CC) -c -DSkip_f2c_Undefs $(ALL_CFLAGS) $<
LINK = @LIBTOOL@ --mode=link $(CC) $(ALL_CFLAGS) -o $@
LINK = @LIBTOOL@ --mode=link $(CC) -o $@
MISC = F77_aloc.lo VersionF.lo s_rnge.lo abort_.lo getarg_.lo iargc_.lo\
getenv_.lo signal_.lo s_stop.lo s_paus.lo system_.lo cabs.lo\
......@@ -80,20 +80,11 @@ F90BIT = lbitbits.lo lbitshft.lo qbitbits.lo qbitshft.lo
OBJS = $(MISC) $(POW) $(CX) $(DCX) $(REAL) $(DBL) $(INT) \
$(HALF) $(CMP) $(EFL) $(CHAR) $(F90BIT)
all: ../s-libf77 ../libfrtbegin.a
../s-libf77: ../libF77.la
echo timestamp > ../s-libf77
all: ../libF77.la ../libfrtbegin.a
../libF77.la: $(OBJS)
$(LINK) $(OBJS)
objlist:
objs="`cat ../objlist`" ; for i in $(OBJS) ; do \
objs="$$objs libF77/$$i" ;\
done ; \
echo -n $$objs > ../objlist
Makefile: Makefile.in config.status
$(SHELL) config.status
......@@ -249,10 +240,10 @@ mostlyclean:
clean: mostlyclean
rm -f config.log
rm -f ../s-libf77
rm -f ../libF77.la
distclean: clean
rm -f config.cache config.status Makefile ../s-libf77 configure
rm -f config.cache config.status Makefile ../libF77.la configure
maintainer-clean:
......
libf2c/libI77/Makefile.in
......@@ -51,7 +51,7 @@ ALL_CFLAGS = -I. -I$(srcdir) -I$(G2C_H_DIR) -I$(F2C_H_DIR) $(CPPFLAGS) \
.c.lo:
@LIBTOOL@ --mode=compile $(CC) -c -DSkip_f2c_Undefs -DAllow_TYQUAD $(ALL_CFLAGS) $<
LINK = @LIBTOOL@ --mode=link $(CC) $(ALL_CFLAGS) -o $@
LINK = @LIBTOOL@ --mode=link $(CC) -o $@
OBJS = VersionI.lo backspace.lo close.lo dfe.lo dolio.lo due.lo endfile.lo err.lo \
fmt.lo fmtlib.lo iio.lo ilnw.lo inquire.lo lread.lo lwrite.lo open.lo \
......@@ -59,20 +59,11 @@ OBJS = VersionI.lo backspace.lo close.lo dfe.lo dolio.lo due.lo endfile.lo err.l
util.lo wref.lo wrtfmt.lo wsfe.lo wsle.lo wsne.lo xwsne.lo \
ftell_.lo
all: ../s-libi77
../s-libi77: ../libI77.la
echo timestamp > ../s-libi77
all: ../libI77.la
../libI77.la: $(OBJS)
$(LINK) $(OBJS)
objlist:
objs="`cat ../objlist`" ; for i in $(OBJS) ; do \
objs="$$objs libI77/$$i" ;\
done ; \
echo -n $$objs > ../objlist
Makefile: Makefile.in config.status
$(SHELL) config.status
......@@ -166,10 +157,10 @@ mostlyclean:
rm -rf .libs
clean: mostlyclean
rm -f config.log ../s-libi77
rm -f config.log ../libI77.la
distclean: clean
rm -f config.cache config.status Makefile ../s-libi77 configure
rm -f config.cache config.status Makefile ../libI77.la configure
maintainer-clean:
......
libf2c/libU77/Makefile.in
......@@ -55,7 +55,7 @@ G77DIR = ../../../gcc/
.c.lo:
@LIBTOOL@ --mode=compile $(CC) -c -DSkip_f2c_Undefs $(ALL_CFLAGS) $<
LINK = @LIBTOOL@ --mode=link $(CC) $(ALL_CFLAGS) -o $@
LINK = @LIBTOOL@ --mode=link $(CC) -o $@
OBJS = VersionU.lo gerror_.lo perror_.lo ierrno_.lo itime_.lo time_.lo \
unlink_.lo fnum_.lo getpid_.lo getuid_.lo getgid_.lo kill_.lo rand_.lo \
......@@ -78,20 +78,11 @@ SRCS = Version.c gerror_.c perror_.c ierrno_.c itime_.c time_.c \
umask_.c sys_clock_.c date_.c second_.c flush1_.c mclock_.c \
alarm_.c datetime_.c
all: ../s-libu77
../s-libu77: ../libU77.la
echo timestamp > ../s-libu77
all: ../libU77.la
../libU77.la: $(OBJS)
$(LINK) $(OBJS)
objlist:
objs="`cat ../objlist`" ; for i in $(OBJS) ; do \
objs="$$objs libU77/$$i" ;\
done ; \
echo -n $$objs > ../objlist
Makefile: Makefile.in config.status
$(SHELL) config.status
......@@ -187,11 +178,11 @@ mostlyclean:
rm -rf .libs
clean: mostlyclean
rm -f config.log ../s-libu77
rm -f config.log ../libU77.la
distclean: clean
rm -f config.cache config.status Makefile config.h stamp.h \
../s-libu77 configure
../libU77.la configure
maintainer-clean:
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment