RISC-V: Add with-multilib-list support.

	gcc/
	PR target/84797
	* config.gcc (riscv*-*-*): Handle --with-multilib-list.
	* config/riscv/t-withmultilib: New.
	* config/riscv/withmultilib.h: New.
	* doc/install.texi: Document RISC-V --with-multilib-list support.

From-SVN: r260096

gcc/ChangeLog

+2018-05-09  Jim Wilson  <jimw@sifive.com>
+
+	PR target/84797
+	* config.gcc (riscv*-*-*): Handle --with-multilib-list.
+	* config/riscv/t-withmultilib: New.
+	* config/riscv/withmultilib.h: New.
+	* doc/install.texi: Document RISC-V --with-multilib-list support.
+
 2018-05-09  Richard Biener  <rguenther@suse.de>
 
 	* tree-vect-slp.c (vect_bb_slp_scalar_cost): Fill a cost

gcc/config.gcc

@@ -4121,6 +4121,58 @@ case "${target}" in
 			exit 1
 			;;
 		esac
+
+		# Handle --with-multilib-list.
+		if test "x${with_multilib_list}" != xdefault; then
+			tm_file="${tm_file} riscv/withmultilib.h"
+			tmake_file="${tmake_file} riscv/t-withmultilib"
+
+			case ${with_multilib_list} in
+			ilp32 | ilp32f | ilp32d \
+			| lp64 | lp64f | lp64d )
+				TM_MULTILIB_CONFIG="${with_arch},${with_multilib_list}"
+				;;
+			*)
+				echo "--with-multilib-list=${with_multilib_list} not supported."
+				exit 1
+			esac
+
+			# Define macros to select the default multilib.
+			case ${with_arch} in
+			rv32gc)
+				tm_defines="${tm_defines} TARGET_MLIB_ARCH=1"
+				;;
+			rv64gc)
+				tm_defines="${tm_defines} TARGET_MLIB_ARCH=2"
+				;;
+			*)
+				echo "unsupported --with-arch for --with-multilib-list"
+				exit 1
+			esac
+			case ${with_abi} in
+			ilp32)
+				tm_defines="${tm_defines} TARGET_MLIB_ABI=1"
+				;;
+			ilp32f)
+				tm_defines="${tm_defines} TARGET_MLIB_ABI=2"
+				;;
+			ilp32d)
+				tm_defines="${tm_defines} TARGET_MLIB_ABI=3"
+				;;
+			lp64)
+				tm_defines="${tm_defines} TARGET_MLIB_ABI=4"
+				;;
+			lp64f)
+				tm_defines="${tm_defines} TARGET_MLIB_ABI=5"
+				;;
+			lp64d)
+				tm_defines="${tm_defines} TARGET_MLIB_ABI=6"
+				;;
+			*)
+				echo "unsupported --with-abi for --with-multilib"
+				exit 1
+			esac
+		fi
 		;;
 
 	mips*-*-*)

gcc/config/riscv/t-withmultilib

+comma=,
+MULTILIB_OPTIONS = $(subst lp64,mabi=lp64,$(subst ilp32,mabi=ilp32,$(subst rv,march=rv,$(subst $(comma), ,$(TM_MULTILIB_CONFIG)))))
+MULTILIB_DIRNAMES = $(patsubst rv32%,lib32,$(patsubst rv64%,lib64,$(subst $(comma), ,$(TM_MULTILIB_CONFIG))))
+MULTILIB_OSDIRNAMES = $(subst lib,../lib,$(MULTILIB_DIRNAMES))
+MULTILIB_REQUIRED   = $(subst lp64,mabi=lp64,$(subst ilp32,mabi=ilp32,$(subst rv,march=rv,$(subst $(comma),/,$(TM_MULTILIB_CONFIG)))))
+MULTILIB_REUSE =

gcc/config/riscv/withmultilib.h

+/* MULTILIB_DEFAULTS definitions for --with-multilib-list.
+   Copyright (C) 2018 Free Software Foundation, Inc.
+
+   This file is part of GCC.
+
+   GCC is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published
+   by the Free Software Foundation; either version 3, or (at your
+   option) any later version.
+
+   GCC is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+   License for more details.
+
+   Under Section 7 of GPL version 3, you are granted additional
+   permissions described in the GCC Runtime Library Exception, version
+   3.1, as published by the Free Software Foundation.
+
+   You should have received a copy of the GNU General Public License and
+   a copy of the GCC Runtime Library Exception along with this program;
+   see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+   <http://www.gnu.org/licenses/>.  */
+
+#if TARGET_MLIB_ARCH == 1
+
+# if TARGET_MLIB_ABI == 1
+#  define MULTILIB_DEFAULTS {"march=rv32gc", "mabi=ilp32" }
+# elif TARGET_MLIB_ABI == 2
+#  define MULTILIB_DEFAULTS {"march=rv32gc", "mabi=ilp32f" }
+# elif TARGET_MLIB_ABI == 3
+#  define MULTILIB_DEFAULTS {"march=rv32gc", "mabi=ilp32d" }
+# else
+#  error "unsupported TARGET_MLIB_ABI value for rv32gc"
+# endif
+
+#elif TARGET_MLIB_ARCH == 2
+
+# if TARGET_MLIB_ABI == 4
+#  define MULTILIB_DEFAULTS {"march=rv64gc", "mabi=lp64" }
+# elif TARGET_MLIB_ABI == 5
+#  define MULTILIB_DEFAULTS {"march=rv64gc", "mabi=lp64f" }
+# elif TARGET_MLIB_ABI == 6
+#  define MULTILIB_DEFAULTS {"march=rv64gc", "mabi=lp64d" }
+# else
+#  error "unsupported TARGET_MLIB_ABI value for rv64gc"
+# endif
+
+#else
+# error "unsupported TARGET_MLIB_ARCH value"
+#endif

gcc/doc/install.texi

@@ -1072,8 +1072,8 @@ sysv, aix.
 @itemx --without-multilib-list
 Specify what multilibs to build.  @var{list} is a comma separated list of
 values, possibly consisting of a single value.  Currently only implemented
-for arm*-*-*, sh*-*-* and x86-64-*-linux*.  The accepted values and meaning
-for each target is given below.
+for arm*-*-*, riscv*-*-*, sh*-*-* and x86-64-*-linux*.  The accepted
+values and meaning for each target is given below.
 
 @table @code
 @item arm*-*-*
@@ -1128,6 +1128,13 @@ and @code{rmprofile}.
 @code{-mfloat-abi=hard}
 @end multitable
 
+@item riscv*-*-*
+@var{list} is a single ABI name.  The target architecture must be either
+@code{rv32gc} or @code{rv64gc}.  This will build a single multilib for the
+specified architecture and ABI pair.  If @code{--with-multilib-list} is not
+given, then a default set of multilibs is selected based on the value of
+@option{--target}.  This is usually a large set of multilibs.
+
 @item sh*-*-*
 @var{list} is a comma separated list of CPU names.  These must be of the
 form @code{sh*} or @code{m*} (in which case they match the compiler option