Skip to content

R
riscv-gcc-1
Commit eaf1bcf1 by Michael Meissner
Options

Add @plt if -fpic; Fix double->int conversions if stack > 32k; Redo t-* files;… 

Add @plt if -fpic; Fix double->int conversions if stack > 32k; Redo t-* files; Fix trampolines on System V systems

From-SVN: r13298
parent a0a7cb35
Showing with 279 additions and 341 deletions
gcc/config/rs6000/rs6000.c
......@@ -4381,65 +4381,6 @@ int get_issue_rate()
}
}
/* Output insns to flush the {data|instruction} caches after building a
trampoline. */
static void
rs6000_sync_trampoline (addr)
rtx addr;
{
enum machine_mode pmode = Pmode;
rtx reg = gen_reg_rtx (pmode);
rtx mem2;
rtx mem1;
int size = rs6000_trampoline_size ();
rtx (*sub_fcn) PROTO ((rtx, rtx, rtx));
rtx (*cmp_fcn) PROTO ((rtx, rtx));
rtx label;
if (TARGET_32BIT)
{
sub_fcn = gen_subsi3;
cmp_fcn = gen_cmpsi;
}
else
{
sub_fcn = gen_subdi3;
cmp_fcn = gen_cmpdi;
}
addr = force_reg (pmode, addr);
mem2 = gen_rtx (MEM, pmode, gen_rtx (PLUS, pmode, addr, reg));
mem1 = gen_rtx (MEM, pmode, addr);
/* Issue a loop of dcbst's to flush the data cache */
emit_move_insn (reg, GEN_INT (size-4));
label = gen_label_rtx ();
emit_label (label);
emit_insn (gen_dcbst (mem2, addr, reg));
emit_insn ((*sub_fcn) (reg, reg, GEN_INT (4)));
emit_insn ((*cmp_fcn) (reg, const0_rtx));
emit_jump_insn (gen_bgt (label));
/* Issue a sync after the dcbst's to let things settle down */
emit_insn (gen_sync (mem1));
/* Issue a loop of icbi's to flush the instruction cache */
emit_move_insn (reg, GEN_INT (size-4));
label = gen_label_rtx ();
emit_label (label);
emit_insn (gen_icbi (mem2, addr, reg));
emit_insn ((*sub_fcn) (reg, reg, GEN_INT (4)));
emit_insn ((*cmp_fcn) (reg, const0_rtx));
emit_jump_insn (gen_bgt (label));
/* Issue a sync after the icbi's to let things settle down */
emit_insn (gen_sync (mem1));
/* Finally issue an isync to synchronize the icache */
emit_insn (gen_isync (mem1));
}
/* Output assembler code for a block containing the constant parts
......@@ -4466,7 +4407,6 @@ rs6000_trampoline_template (file)
the address of the function, the second word is the TOC pointer (r2),
and the third word is the static chain value. */
case ABI_AIX:
fprintf (file, "\t.long %s\n", (TARGET_32BIT) ? "0,0,0" : "0,0,0,0,0,0");
break;
......@@ -4475,35 +4415,6 @@ rs6000_trampoline_template (file)
case ABI_V4:
case ABI_SOLARIS:
case ABI_AIX_NODESC:
if (STATIC_CHAIN_REGNUM == 0 || !TARGET_NEW_MNEMONICS)
abort ();
if (TARGET_32BIT)
{
fprintf (file, "\tmflr %s\n", r0); /* offset 0 */
fprintf (file, "\tbl .LTRAMP1\n"); /* offset 4 */
fprintf (file, "\t.long 0,0\n"); /* offset 8 */
fprintf (file, ".LTRAMP1:\n");
fprintf (file, "\tmflr %s\n", sc); /* offset 20 */
fprintf (file, "\tmtlr %s\n", r0); /* offset 24 */
fprintf (file, "\tlwz %s,0(%s)\n", r0, sc); /* offset 28 */
fprintf (file, "\tlwz %s,4(%s)\n", sc, sc); /* offset 32 */
fprintf (file, "\tmtctr %s\n", r0); /* offset 36 */
fprintf (file, "\tbctr\n"); /* offset 40 */
}
else
{
fprintf (file, "\tmflr %s\n", r0); /* offset 0 */
fprintf (file, "\tbl .LTRAMP1\n"); /* offset 4 */
fprintf (file, "\t.long 0,0,0,0\n"); /* offset 8 */
fprintf (file, ".LTRAMP1:\n");
fprintf (file, "\tmflr %s\n", sc); /* offset 28 */
fprintf (file, "\tmtlr %s\n", r0); /* offset 32 */
fprintf (file, "\tld %s,0(%s)\n", r0, sc); /* offset 36 */
fprintf (file, "\tld %s,8(%s)\n", sc, sc); /* offset 40 */
fprintf (file, "\tmtctr %s\n", r0); /* offset 44 */
fprintf (file, "\tbctr\n"); /* offset 48 */
}
break;
/* NT function pointers point to a two word area (real address, TOC)
......@@ -4600,18 +4511,16 @@ rs6000_initialize_trampoline (addr, fnaddr, cxt)
}
break;
/* Under V.4/eabi, update the two words after the bl to have the real
function address and the static chain. */
/* Under V.4/eabi, call __trampoline_setup to do the real work. */
case ABI_V4:
case ABI_SOLARIS:
case ABI_AIX_NODESC:
{
rtx reg = gen_reg_rtx (pmode);
emit_move_insn (reg, fnaddr);
emit_move_insn (MEM_PLUS (addr, 8), reg);
emit_move_insn (MEM_PLUS (addr, 8 + regsize), ctx_reg);
rs6000_sync_trampoline (addr);
}
emit_library_call (gen_rtx (SYMBOL_REF, SImode, "__trampoline_setup"),
FALSE, VOIDmode, 4,
addr, pmode,
GEN_INT (rs6000_trampoline_size ()), SImode,
fnaddr, pmode,
ctx_reg, pmode);
break;
/* Under NT, update the first word to point to the ..LTRAMP1..0 header,
......@@ -4944,74 +4853,3 @@ rs6000_encode_section_info (decl)
}
#endif /* USING_SVR4_H */
/* CYGNUS LOCAL mac */
/* Whether we are using m68k-compatible alignment. */
int mac68k_aligned;
/* Most Mac compiler pragmas are unimportant, but we must recognize
the m68k alignment pragma, because that is crucial to transitions
to and from the m68k emulator on PowerMacs. */
int
handle_mac_pragma (finput, t)
FILE *finput;
tree t;
{
int retval = 0;
register char *pname;
char pbuf[200];
int c, psize = 0;
if (TREE_CODE (t) != IDENTIFIER_NODE)
return 0;
pname = IDENTIFIER_POINTER (t);
if (strcmp (pname, "segment") == 0)
{
/* (should collect pbuf + 8 into a segment name) */
}
else if (strcmp (pname, "options") == 0)
{
c = getc (finput);
/* Skip over initial whitespace. */
while (c == ' ' || c == '\t')
c = getc (finput);
/* Return without doing anything if no content. */
if (c == '\n' || c == EOF)
{
ungetc (c, finput);
return 0;
}
/* Collect the rest of the line. */
while (psize < sizeof (pbuf) - 1 && c != '\n')
{
pbuf[psize++] = c;
c = getc (finput);
}
if (strncmp (pbuf, "align=mac68k", 12) == 0)
{
mac68k_aligned = 1;
retval = 1;
}
else if (strncmp (pbuf, "align=power", 11) == 0)
{
mac68k_aligned = 0;
retval = 1;
}
else if (strncmp (pbuf, "align=reset", 11) == 0)
{
mac68k_aligned = 0;
retval = 1;
}
}
return retval;
}
/* END CYGNUS LOCAL mac */
gcc/config/rs6000/rs6000.h
......@@ -441,7 +441,6 @@ struct rs6000_cpu_select
extern struct rs6000_cpu_select rs6000_select[];
/* Sometimes certain combinations of command options do not make sense
on a particular target machine. You can define a macro
`OVERRIDE_OPTIONS' to take account of this. This macro, if
......@@ -1520,12 +1519,7 @@ typedef struct rs6000_args
#define FUNCTION_EPILOGUE(FILE, SIZE) output_epilog (FILE, SIZE)
/* Output assembler code for a block containing the constant parts
of a trampoline, leaving space for the variable parts.
The trampoline should set the static chain pointer to value placed
into the trampoline and should branch to the specified routine. */
#define TRAMPOLINE_TEMPLATE(FILE) rs6000_trampoline_template (FILE)
/* TRAMPOLINE_TEMPLATE deleted */
/* Length in units of the trampoline for entering a nested function. */
......
gcc/config/rs6000/rs6000.md
......@@ -3836,7 +3836,8 @@
operands[2] = gen_rtx (MEM, DFmode,
gen_rtx (PLUS, Pmode,
indx,
GEN_INT (rs6000_fpmem_offset)));
GEN_INT ((((rs6000_fpmem_offset & 0xffff)
^ 0x8000) - 0x8000))));
return \"stfd %0,%w2\";
}"
......@@ -7359,7 +7360,7 @@
else if (INTVAL (operands[2]) & CALL_V4_CLEAR_FP_ARGS)
output_asm_insn (\"creqv 6,6,6\", operands);
return \"bl %z0\";
return (flag_pic) ? \"bl %z0@plt\" : \"bl %z0\";
}"
[(set_attr "type" "branch")
(set_attr "length" "4,8")])
......@@ -7429,7 +7430,7 @@
else if (INTVAL (operands[3]) & CALL_V4_CLEAR_FP_ARGS)
output_asm_insn (\"creqv 6,6,6\", operands);
return \"bl %z1\";
return (flag_pic) ? \"bl %z1@plt\" : \"bl %z1\";
}"
[(set_attr "type" "branch")
(set_attr "length" "4,8")])
......@@ -7470,41 +7471,13 @@
""
"")
;; Synchronize instructions/data caches for V.4 trampolines
;; The extra memory_operand is to prevent the optimizer from
;; deleting insns with "no" effect.
(define_insn "icbi"
[(unspec [(match_operand 0 "memory_operand" "=m")
(match_operand 1 "register_operand" "b")
(match_operand 2 "register_operand" "r")] 3)]
"TARGET_POWERPC"
"icbi %1,%2")
(define_insn "dcbst"
[(unspec [(match_operand 0 "memory_operand" "=m")
(match_operand 1 "register_operand" "b")
(match_operand 2 "register_operand" "r")] 4)]
"TARGET_POWERPC"
"dcbst %1,%2")
(define_insn "sync"
[(unspec [(match_operand 0 "memory_operand" "=m")] 5)]
""
"{dcs|sync}")
(define_insn "isync"
[(unspec [(match_operand 0 "memory_operand" "=m")] 6)]
""
"{ics|isync}")
;; V.4 specific code to initialize the PIC register
(define_insn "init_v4_pic"
[(set (match_operand:SI 0 "register_operand" "=l")
(unspec [(const_int 0)] 7))]
"DEFAULT_ABI == ABI_V4 || DEFAULT_ABI == ABI_SOLARIS"
"bl _GLOBAL_OFFSET_TABLE_-4"
"bl _GLOBAL_OFFSET_TABLE_@local-4"
[(set_attr "type" "branch")])
......
gcc/config/rs6000/sol-c0.c
......@@ -84,12 +84,13 @@ _start(int argc, char *argv[], char *envp[], void *auxp, void (*termfunc)())
int ret;
int dummy = 0;
/* Load up r13 before we do anything else. */
__asm__ volatile ("mr %%r13,%0;mr %%r2,%1" : "=r" (dummy) : "r" (&_SDA_BASE_[0]), "r" (&_SDA2_BASE_[0]));
_environ = envp;
/* Load up r13/r2 before we do anything else. */
__asm__ volatile ("mr %%r13,%0;mr %%r2,%1" : "=r" (dummy) : "r" (&_SDA_BASE_[0]), "r" (&_SDA2_BASE_[0]), "r" (dummy));
_environ = envp + dummy;
/* Register loader termination function */
if (termfunc || dummy)
/* Register loader termination function (the || dummy is to make sure the above asm
is not optimized away). */
if (termfunc)
atexit (termfunc);
/* Register exception handler if needed */
......
gcc/config/rs6000/sysv4.h
......@@ -967,7 +967,7 @@ do { \
%{memb} %{!memb: %{msdata: -memb} %{msdata=eabi: -memb}} \
%{mlittle} %{mlittle-endian} %{mbig} %{mbig-endian} \
%{!mlittle: %{!mlittle-endian: %{!mbig: %{!mbig-endian: \
%{mcall-solaris: -mlittle} %{mcall-linux: -mbig} }}}}"
%{mcall-solaris: -mlittle -msolaris} %{mcall-linux: -mbig} }}}}"
#undef CC1_SPEC
/* Pass -G xxx to the compiler and set correct endian mode */
......
gcc/config/rs6000/t-ppc
# Do not build libgcc1.
LIBGCC1 =
CROSS_LIBGCC1 =
# These are really part of libgcc1, but this will cause them to be
# built correctly, so... [taken from t-sparclite]
LIB2FUNCS_EXTRA = fp-bit.c dp-bit.c eabi.S eabi-ctors.c
dp-bit.c: $(srcdir)/config/fp-bit.c
cat $(srcdir)/config/fp-bit.c > dp-bit.c
fp-bit.c: $(srcdir)/config/fp-bit.c
echo '#define FLOAT' > fp-bit.c
cat $(srcdir)/config/fp-bit.c >> fp-bit.c
eabi.S: $(srcdir)/config/rs6000/eabi.asm
cat $(srcdir)/config/rs6000/eabi.asm > eabi.S
eabi-ctors.c: $(srcdir)/config/rs6000/eabi-ctors.c
cat $(srcdir)/config/rs6000/eabi-ctors.c > eabi-ctors.c
# PowerPC support without gas
# Build libgcc.a with different options. If no gas support, don't build
# explicit little endian or big endian libraries, since it depends on the
# -mbig/-mlittle switches passed to gas. The -mrelocatable support also needs
# -mrelocatable passed to gas, so don't use it either.
MULTILIB_OPTIONS = msoft-float
MULTILIB_DIRNAMES = nof
MULTILIB_MATCHES =
MULTILIB_EXCEPTIONS =
LIBGCC = stmp-multilib
INSTALL_LIBGCC = install-multilib
EXTRA_MULTILIB_PARTS = ecrti$(objext) ecrtn$(objext) scrt0$(objext) scrti$(objext) scrtn$(objext)
# For eabigas we build {e,s}crti.o and {e,s}crtn.o which serve to add begin and
# end labels to all of the special sections used when we link using gcc.
# Assemble startup files.
ecrti.S: $(srcdir)/config/rs6000/eabi-ci.asm
cat $(srcdir)/config/rs6000/eabi-ci.asm >ecrti.S
ecrtn.S: $(srcdir)/config/rs6000/eabi-cn.asm
cat $(srcdir)/config/rs6000/eabi-cn.asm >ecrtn.S
scrti.S: $(srcdir)/config/rs6000/sol-ci.asm
cat $(srcdir)/config/rs6000/sol-ci.asm >scrti.S
scrtn.S: $(srcdir)/config/rs6000/sol-cn.asm
cat $(srcdir)/config/rs6000/sol-cn.asm >scrtn.S
scrt0.c: $(srcdir)/config/rs6000/sol-c0.c
cat $(srcdir)/config/rs6000/sol-c0.c >scrt0.c
# Build multiple copies of ?crt{i,n}.o, one for each target switch.
$(T)ecrti$(objext): ecrti.S
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -c ecrti.S -o $(T)ecrti$(objext)
$(T)ecrtn$(objext): ecrtn.S
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -c ecrtn.S -o $(T)ecrtn$(objext)
$(T)scrti$(objext): scrti.S
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -c ecrti.S -o $(T)scrti$(objext)
$(T)scrtn$(objext): scrtn.S
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -c ecrti.S -o $(T)scrtn$(objext)
$(T)scrt0$(objext): scrt0.c
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -c ecrti.S -o $(T)scrt0$(objext)
MULTILIB_EXTRA_OPTS =
MULTILIB_MATCHES = ${MULTILIB_MATCHES_FLOAT}
gcc/config/rs6000/t-ppccomm 0 → 100644
# Common support for PowerPC eabi, System V targets.
# Do not build libgcc1.
LIBGCC1 =
CROSS_LIBGCC1 =
# These are really part of libgcc1, but this will cause them to be
# built correctly, so... [taken from t-sparclite]
LIB2FUNCS_EXTRA = fp-bit.c dp-bit.c eabi.S eabi-ctors.c tramp.S
dp-bit.c: $(srcdir)/config/fp-bit.c
cat $(srcdir)/config/fp-bit.c > dp-bit.c
fp-bit.c: $(srcdir)/config/fp-bit.c
echo '#define FLOAT' > fp-bit.c
cat $(srcdir)/config/fp-bit.c >> fp-bit.c
eabi.S: $(srcdir)/config/rs6000/eabi.asm
cat $(srcdir)/config/rs6000/eabi.asm > eabi.S
eabi-ctors.c: $(srcdir)/config/rs6000/eabi-ctors.c
cat $(srcdir)/config/rs6000/eabi-ctors.c > eabi-ctors.c
tramp.S: $(srcdir)/config/rs6000/tramp.asm
cat $(srcdir)/config/rs6000/tramp.asm > tramp.S
# Switch synonyms
MULTILIB_MATCHES_FLOAT = msoft-float=mcpu?403 msoft-float=mcpu?821 msoft-float=mcpu?860
MULTILIB_MATCHES_ENDIAN = mlittle=mlittle-endian mbig=mbig-endian
MULTILIB_MATCHES_SYSV = mcall-sysv=mcall-sysv-eabi mcall-sysv=mcall-sysv-noeabi
LIBGCC = stmp-multilib
INSTALL_LIBGCC = install-multilib
EXTRA_MULTILIB_PARTS = ecrti$(objext) ecrtn$(objext) scrt0$(objext) scrti$(objext) scrtn$(objext)
# We build {e,s}crti.o, {e,s}crtn.o, and scrt0.o which serve to add begin and
# end labels to all of the special sections used when we link using gcc.
# Assemble startup files.
ecrti.S: $(srcdir)/config/rs6000/eabi-ci.asm
cat $(srcdir)/config/rs6000/eabi-ci.asm >ecrti.S
ecrtn.S: $(srcdir)/config/rs6000/eabi-cn.asm
cat $(srcdir)/config/rs6000/eabi-cn.asm >ecrtn.S
scrti.S: $(srcdir)/config/rs6000/sol-ci.asm
cat $(srcdir)/config/rs6000/sol-ci.asm >scrti.S
scrtn.S: $(srcdir)/config/rs6000/sol-cn.asm
cat $(srcdir)/config/rs6000/sol-cn.asm >scrtn.S
scrt0.c: $(srcdir)/config/rs6000/sol-c0.c
cat $(srcdir)/config/rs6000/sol-c0.c >scrt0.c
# Build multiple copies of ?crt{i,n}.o, one for each target switch.
$(T)ecrti$(objext): ecrti.S
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -c ecrti.S -o $(T)ecrti$(objext)
$(T)ecrtn$(objext): ecrtn.S
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -c ecrtn.S -o $(T)ecrtn$(objext)
$(T)scrti$(objext): scrti.S
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -c scrti.S -o $(T)scrti$(objext)
$(T)scrtn$(objext): scrtn.S
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -c scrtn.S -o $(T)scrtn$(objext)
$(T)scrt0$(objext): scrt0.c
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -c scrt0.c -o $(T)scrt0$(objext)
gcc/config/rs6000/t-ppcgas
# Do not build libgcc1.
LIBGCC1 =
CROSS_LIBGCC1 =
# These are really part of libgcc1, but this will cause them to be
# built correctly, so... [taken from t-sparclite]
LIB2FUNCS_EXTRA = fp-bit.c dp-bit.c eabi.S eabi-ctors.c
dp-bit.c: $(srcdir)/config/fp-bit.c
cat $(srcdir)/config/fp-bit.c > dp-bit.c
fp-bit.c: $(srcdir)/config/fp-bit.c
echo '#define FLOAT' > fp-bit.c
cat $(srcdir)/config/fp-bit.c >> fp-bit.c
eabi.S: $(srcdir)/config/rs6000/eabi.asm
cat $(srcdir)/config/rs6000/eabi.asm > eabi.S
eabi-ctors.c: $(srcdir)/config/rs6000/eabi-ctors.c
cat $(srcdir)/config/rs6000/eabi-ctors.c > eabi-ctors.c
# PowerPC embedded support with gas.
# Build libgcc.a with different options.
MULTILIB_OPTIONS = msoft-float \
......@@ -29,14 +9,6 @@ MULTILIB_DIRNAMES = nof \
le be \
cs ca sol lin
MULTILIB_MATCHES = mlittle=mlittle-endian \
mbig=mbig-endian \
msoft-float=mcpu?403 \
msoft-float=mcpu?821 \
msoft-float=mcpu?860 \
mcall-sysv=mcall-sysv-eabi \
mcall-sysv=mcall-sysv-noeabi
MULTILIB_EXTRA_OPTS = mrelocatable-lib mno-eabi
MULTILIB_EXCEPTIONS = *mbig/*mcall-solaris* \
*mlittle/*mcall-solaris* \
......@@ -45,41 +17,6 @@ MULTILIB_EXCEPTIONS = *mbig/*mcall-solaris* \
*mlittle/*mcall-linux* \
*msoft-float/*mcall-linux*
LIBGCC = stmp-multilib
INSTALL_LIBGCC = install-multilib
EXTRA_MULTILIB_PARTS = ecrti$(objext) ecrtn$(objext) scrt0$(objext) scrti$(objext) scrtn$(objext)
# For eabigas we build {e,s}crti.o and {e,s}crtn.o which serve to add begin and
# end labels to all of the special sections used when we link using gcc.
# Assemble startup files.
ecrti.S: $(srcdir)/config/rs6000/eabi-ci.asm
cat $(srcdir)/config/rs6000/eabi-ci.asm >ecrti.S
ecrtn.S: $(srcdir)/config/rs6000/eabi-cn.asm
cat $(srcdir)/config/rs6000/eabi-cn.asm >ecrtn.S
scrti.S: $(srcdir)/config/rs6000/sol-ci.asm
cat $(srcdir)/config/rs6000/sol-ci.asm >scrti.S
scrtn.S: $(srcdir)/config/rs6000/sol-cn.asm
cat $(srcdir)/config/rs6000/sol-cn.asm >scrtn.S
scrt0.c: $(srcdir)/config/rs6000/sol-c0.c
cat $(srcdir)/config/rs6000/sol-c0.c >scrt0.c
# Build multiple copies of ?crt{i,n}.o, one for each target switch.
$(T)ecrti$(objext): ecrti.S
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -c ecrti.S -o $(T)ecrti$(objext)
$(T)ecrtn$(objext): ecrtn.S
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -c ecrtn.S -o $(T)ecrtn$(objext)
$(T)scrti$(objext): scrti.S
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -c ecrti.S -o $(T)scrti$(objext)
$(T)scrtn$(objext): scrtn.S
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -c ecrti.S -o $(T)scrtn$(objext)
$(T)scrt0$(objext): scrt0.c
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -c ecrti.S -o $(T)scrt0$(objext)
MULTILIB_MATCHES = ${MULTILIB_MATCHES_FLOAT} \
${MULTILIB_MATCHES_ENDIAN} \
${MULTILIB_MATCHES_SYSV}
gcc/config/rs6000/t-ppcos 0 → 100644
# Target config file for a System V based system (Solaris, Linux, Netbsd) with gas
# Build libgcc.a with different options. With gas, build pic libraries
# as well no floating point
MULTILIB_OPTIONS = msoft-float fPIC
MULTILIB_DIRNAMES = nof pic
MULTILIB_EXCEPTIONS =
MULTILIB_MATCHES = ${MULTILIB_MATCHES_FLOAT} \
fPIC=mrelocatable-lib \
fPIC=mrelocatable \
fPIC=fpic
gcc/config/rs6000/tramp.asm 0 → 100644
/* CYGNUS LOCAL -- waiting for FSF sources to be restored/meissner */
/*
* special support for trampolines
*
* Copyright (C) 1996 Free Software Foundation, Inc.
* Written By Michael Meissner
*
* This file is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* In addition to the permissions in the GNU General Public License, the
* Free Software Foundation gives you unlimited permission to link the
* compiled version of this file with other programs, and to distribute
* those programs without any restriction coming from the use of this
* file. (The General Public License restrictions do apply in other
* respects; for example, they cover modification of the file, and
* distribution when not linked into another program.)
*
* This file is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 59 Temple Place - Suite 330,
* Boston, MA 02111-1307, USA.
*
* As a special exception, if you link this library with files
* compiled with GCC to produce an executable, this does not cause
* the resulting executable to be covered by the GNU General Public License.
* This exception does not however invalidate any other reasons why
* the executable file might be covered by the GNU General Public License.
*/
/* Set up trampolines */
.file "tramp.asm"
.section ".text"
#include "ppc-asm.h"
.globl __trampoline_initial
.type __trampoline_initial,@object
.align 2
__trampoline_initial:
mflr r0
bl 1f
.Lfunc = .-__trampoline_initial
.long 0 /* will be replaced with function address */
.Lchain = .-__trampoline_initial
.long 0 /* will be replaced with static chain */
1: mflr r11
mtlr r0
lwz r0,0(r11) /* function address */
lwz r11,4(r11) /* static chain */
mtctr r0
bctr
__trampoline_size = .-__trampoline_initial
.size __trampoline_initial,__trampoline_size
.section ".got2","aw"
.LCTOC1 = .+32768
.Ltramp = .-.LCTOC1
.long __trampoline_initial-4
.section ".text"
.LCL0:
.long .LCTOC1-.LCF0
/* R3 = stack address to store trampoline */
/* R4 = length of trampoline area */
/* R5 = function address */
/* R6 = static chain */
FUNC_START(__trampoline_setup)
mflr r0 /* save return address */
bl .LCF0 /* load up __trampoline_initial into r7 */
.LCF0:
mflr r11
lwz r12,(.LCL0-.LCF0)(r11)
add r11,r12,r11
lwz r7,.Ltramp(r11) /* trampoline addres -4 */
li r8,__trampoline_size /* verify that the trampoline is big enough */
cmpw cr1,r8,r4
srwi r4,r4,2 /* # words to move */
addi r9,r3,-4 /* adjust pointer for lwzu */
mtctr r4
blt cr1,.Labort
mtlr r0
/* Copy the instructions to the stack */
.Lmove:
lwzu r10,4(r7)
stwu r10,4(r9)
bdnz .Lmove
/* Store correct function and static chain */
stw r5,.Lfunc(r3)
stw r6,.Lchain(r3)
/* Now flush both caches */
mtctr r4
.Lcache:
icbi 0,r3
dcbf 0,r3
addi r3,r3,4
bdnz .Lcache
/* Finally synchronize things & return */
sync
isync
blr
.Labort:
bl abort
FUNC_END(__trampoline_setup)
/* END CYGNUS LOCAL -- waiting for FSF sources to be restored/meissner */
gcc/config/rs6000/win-nt.h
......@@ -472,3 +472,10 @@ dtors_section () \
#undef HAS_INIT_SECTION
#define HAS_INIT_SECTION
/* Output assembler code for a block containing the constant parts
of a trampoline, leaving space for the variable parts.
The trampoline should set the static chain pointer to value placed
into the trampoline and should branch to the specified routine. */
#define TRAMPOLINE_TEMPLATE(FILE) rs6000_trampoline_template (FILE)
gcc/ginclude/ppc-asm.h
......@@ -35,6 +35,48 @@
#define r29 29
#define r30 30
#define r31 31
#define cr0 0
#define cr1 1
#define cr2 2
#define cr3 3
#define cr4 4
#define cr5 5
#define cr6 6
#define cr7 7
#define f0 0
#define f1 1
#define f2 2
#define f3 3
#define f4 4
#define f5 5
#define f6 6
#define f7 7
#define f8 8
#define f9 9
#define f10 10
#define f11 11
#define f12 12
#define f13 13
#define f14 14
#define f15 15
#define f16 16
#define f17 17
#define f18 18
#define f19 19
#define f20 20
#define f21 21
#define f22 22
#define f23 23
#define f24 24
#define f25 25
#define f26 26
#define f27 27
#define f28 28
#define f29 29
#define f30 30
#define f31 31
#endif
/*
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment