Skip to content

R
riscv-gcc-1
Commit e19eea71 by Bill Schmidt Committed by William Schmidt
Options

altivec.md (UNSPEC_VPERM_X, [...]): Remove. 

gcc:

2013-11-15  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/altivec.md (UNSPEC_VPERM_X, UNSPEC_VPERM_UNS_X):
	Remove.
	(altivec_vperm_<mode>): Revert earlier little endian change.
	(*altivec_vperm_<mode>_internal): Remove.
	(altivec_vperm_<mode>_uns): Revert earlier little endian change.
	(*altivec_vperm_<mode>_uns_internal): Remove.
	* config/rs6000/vector.md (vec_realign_load_<mode>): Revise
	commentary.

gcc/testsuite:

2013-11-15  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* gcc.dg/vmx/3b-15.c: Revise for little endian.

From-SVN: r204862
parent 6efe83b2
Showing with 28 additions and 76 deletions
gcc/ChangeLog
2013-11-15 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/altivec.md (UNSPEC_VPERM_X, UNSPEC_VPERM_UNS_X):
Remove.
(altivec_vperm_<mode>): Revert earlier little endian change.
(*altivec_vperm_<mode>_internal): Remove.
(altivec_vperm_<mode>_uns): Revert earlier little endian change.
(*altivec_vperm_<mode>_uns_internal): Remove.
* config/rs6000/vector.md (vec_realign_load_<mode>): Revise
commentary.
2013-11-15 Jeff Law <law@redhat.com>
* basic-block.h (has_abnormal_or_eh_outgoing_edge): Renamed from
gcc/config/rs6000/altivec.md
......@@ -59,8 +59,6 @@
UNSPEC_VSUMSWS
UNSPEC_VPERM
UNSPEC_VPERM_UNS
UNSPEC_VPERM_X
UNSPEC_VPERM_UNS_X
UNSPEC_VRFIN
UNSPEC_VCFUX
UNSPEC_VCFSX
......@@ -1393,91 +1391,21 @@
"vrfiz %0,%1"
[(set_attr "type" "vecfloat")])
(define_insn_and_split "altivec_vperm_<mode>"
(define_insn "altivec_vperm_<mode>"
[(set (match_operand:VM 0 "register_operand" "=v")
(unspec:VM [(match_operand:VM 1 "register_operand" "v")
(match_operand:VM 2 "register_operand" "v")
(match_operand:V16QI 3 "register_operand" "v")]
UNSPEC_VPERM_X))]
"TARGET_ALTIVEC"
"#"
"!reload_in_progress && !reload_completed"
[(set (match_dup 0) (match_dup 4))]
{
if (BYTES_BIG_ENDIAN)
operands[4] = gen_rtx_UNSPEC (<MODE>mode,
gen_rtvec (3, operands[1],
operands[2], operands[3]),
UNSPEC_VPERM);
else
{
/* We want to subtract from 31, but we can't vspltisb 31 since
it's out of range. -1 works as well because only the low-order
five bits of the permute control vector elements are used. */
rtx splat = gen_rtx_VEC_DUPLICATE (V16QImode,
gen_rtx_CONST_INT (QImode, -1));
rtx tmp = gen_reg_rtx (V16QImode);
emit_move_insn (tmp, splat);
rtx sel = gen_rtx_MINUS (V16QImode, tmp, operands[3]);
emit_move_insn (tmp, sel);
operands[4] = gen_rtx_UNSPEC (<MODE>mode,
gen_rtvec (3, operands[2],
operands[1], tmp),
UNSPEC_VPERM);
}
}
[(set_attr "type" "vecperm")])
(define_insn "*altivec_vperm_<mode>_internal"
[(set (match_operand:VM 0 "register_operand" "=v")
(unspec:VM [(match_operand:VM 1 "register_operand" "v")
(match_operand:VM 2 "register_operand" "v")
(match_operand:V16QI 3 "register_operand" "+v")]
UNSPEC_VPERM))]
"TARGET_ALTIVEC"
"vperm %0,%1,%2,%3"
[(set_attr "type" "vecperm")])
(define_insn_and_split "altivec_vperm_<mode>_uns"
(define_insn "altivec_vperm_<mode>_uns"
[(set (match_operand:VM 0 "register_operand" "=v")
(unspec:VM [(match_operand:VM 1 "register_operand" "v")
(match_operand:VM 2 "register_operand" "v")
(match_operand:V16QI 3 "register_operand" "v")]
UNSPEC_VPERM_UNS_X))]
"TARGET_ALTIVEC"
"#"
"!reload_in_progress && !reload_completed"
[(set (match_dup 0) (match_dup 4))]
{
if (BYTES_BIG_ENDIAN)
operands[4] = gen_rtx_UNSPEC (<MODE>mode,
gen_rtvec (3, operands[1],
operands[2], operands[3]),
UNSPEC_VPERM_UNS);
else
{
/* We want to subtract from 31, but we can't vspltisb 31 since
it's out of range. -1 works as well because only the low-order
five bits of the permute control vector elements are used. */
rtx splat = gen_rtx_VEC_DUPLICATE (V16QImode,
gen_rtx_CONST_INT (QImode, -1));
rtx tmp = gen_reg_rtx (V16QImode);
emit_move_insn (tmp, splat);
rtx sel = gen_rtx_MINUS (V16QImode, tmp, operands[3]);
emit_move_insn (tmp, sel);
operands[4] = gen_rtx_UNSPEC (<MODE>mode,
gen_rtvec (3, operands[2],
operands[1], tmp),
UNSPEC_VPERM_UNS);
}
}
[(set_attr "type" "vecperm")])
(define_insn "*altivec_vperm_<mode>_uns_internal"
[(set (match_operand:VM 0 "register_operand" "=v")
(unspec:VM [(match_operand:VM 1 "register_operand" "v")
(match_operand:VM 2 "register_operand" "v")
(match_operand:V16QI 3 "register_operand" "+v")]
UNSPEC_VPERM_UNS))]
"TARGET_ALTIVEC"
"vperm %0,%1,%2,%3"
......
gcc/config/rs6000/vector.md
......@@ -966,8 +966,8 @@
operands[2], operands[3]));
else
{
/* Avoid the "subtract from splat31" workaround for vperm since
we have changed lvsr to lvsl instead. */
/* We have changed lvsr to lvsl, so to complete the transformation
of vperm for LE, we must swap the inputs. */
rtx unspec = gen_rtx_UNSPEC (<MODE>mode,
gen_rtvec (3, operands[2],
operands[1], operands[3]),
......
gcc/testsuite/ChangeLog
2013-11-15 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* gcc.dg/vmx/3b-15.c: Revise for little endian.
2013-11-15 Richard Biener <rguenther@suse.de>
PR tree-optimization/50262
......
gcc/testsuite/gcc.dg/vmx/3b-15.c
......@@ -3,7 +3,11 @@
vector unsigned char
f (vector unsigned char a, vector unsigned char b, vector unsigned char c)
{
#ifdef __BIG_ENDIAN__
return vec_perm(a,b,c);
#else
return vec_perm(b,a,c);
#endif
}
static void test()
......@@ -12,8 +16,13 @@ static void test()
8,9,10,11,12,13,14,15}),
((vector unsigned char){70,71,72,73,74,75,76,77,
78,79,80,81,82,83,84,85}),
#ifdef __BIG_ENDIAN__
((vector unsigned char){0x1,0x14,0x18,0x10,0x16,0x15,0x19,0x1a,
0x1c,0x1c,0x1c,0x12,0x8,0x1d,0x1b,0xe})),
#else
((vector unsigned char){0x1e,0xb,0x7,0xf,0x9,0xa,0x6,0x5,
0x3,0x3,0x3,0xd,0x17,0x2,0x4,0x11})),
#endif
((vector unsigned char){1,74,78,70,76,75,79,80,82,82,82,72,8,83,81,14})),
"f");
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment