[arm] Allow the summation result of signed add-with-overflow to be discarded.

This patch matches the signed add-with-overflow patterns when the
summation itself is dropped.  In this case we can use CMN (or CMP with
some immediates).  There are a small number of constants in thumb2
where this can result in less dense code (as we lack 16-bit CMN with
immediate patterns).  To handle this we use peepholes to try these
alternatives when either a scratch is available (0 <= i <= 7) or the
original register is dead (0 <= i <= 255).  We don't use a scratch in
the pattern as if those conditions are not satisfied then the 32-bit
form is preferable to forcing a reload.

	* config/arm/arm.md (addsi3_compareV_reg_nosum): New insn.
	(addsi3_compareV_imm_nosum): New insn.  Also add peephole2 patterns
	to transform this back into the summation version when that leads
	to smaller code.

From-SVN: r277185

gcc/ChangeLog

 2019-10-18  Richard Earnshaw  <rearnsha@arm.com>
 
+	* config/arm/arm.md (addsi3_compareV_reg_nosum): New insn.
+	(addsi3_compareV_imm_nosum): New insn.  Also add peephole2 patterns
+	to transform this back into the summation version when that leads
+	to smaller code.
+
+2019-10-18  Richard Earnshaw  <rearnsha@arm.com>
+
 	* config/arm/arm.md (addv<mode>4): Delete.
 	(addvsi4): New pattern.  Handle immediate values that the architecture
 	supports.

gcc/config/arm/arm.md

@@ -803,6 +803,21 @@
    (set_attr "type" "alus_sreg")]
 )
 
+(define_insn "*addsi3_compareV_reg_nosum"
+  [(set (reg:CC_V CC_REGNUM)
+	(compare:CC_V
+	  (plus:DI
+	    (sign_extend:DI (match_operand:SI 0 "register_operand" "%l,r"))
+	    (sign_extend:DI (match_operand:SI 1 "register_operand" "l,r")))
+	  (sign_extend:DI (plus:SI (match_dup 0) (match_dup 1)))))]
+  "TARGET_32BIT"
+  "cmn%?\\t%0, %1"
+  [(set_attr "conds" "set")
+   (set_attr "arch" "t2,*")
+   (set_attr "length" "2,4")
+   (set_attr "type" "alus_sreg")]
+)
+
 (define_insn "addsi3_compareV_imm"
   [(set (reg:CC_V CC_REGNUM)
 	(compare:CC_V
@@ -828,6 +843,69 @@
    (set_attr "type" "alus_imm")]
 )
 
+(define_insn "addsi3_compareV_imm_nosum"
+  [(set (reg:CC_V CC_REGNUM)
+	(compare:CC_V
+	  (plus:DI
+	    (sign_extend:DI
+	     (match_operand:SI 0 "register_operand" "l,r,r"))
+	    (match_operand 1 "arm_addimm_operand" "Pw,I,L"))
+	  (sign_extend:DI (plus:SI (match_dup 0) (match_dup 1)))))]
+  "TARGET_32BIT
+   && INTVAL (operands[1]) == ARM_SIGN_EXTEND (INTVAL (operands[1]))"
+  "@
+   cmp%?\\t%0, #%n1
+   cmn%?\\t%0, %1
+   cmp%?\\t%0, #%n1"
+  [(set_attr "conds" "set")
+   (set_attr "arch" "t2,*,*")
+   (set_attr "length" "2,4,4")
+   (set_attr "type" "alus_imm")]
+)
+
+;; We can handle more constants efficently if we can clobber either a scratch
+;; or the other source operand.  We deliberately leave this late as in
+;; high register pressure situations it's not worth forcing any reloads.
+(define_peephole2
+  [(match_scratch:SI 2 "l")
+   (set (reg:CC_V CC_REGNUM)
+	(compare:CC_V
+	  (plus:DI
+	    (sign_extend:DI
+	     (match_operand:SI 0 "low_register_operand"))
+	    (match_operand 1 "const_int_operand"))
+	  (sign_extend:DI (plus:SI (match_dup 0) (match_dup 1)))))]
+  "TARGET_THUMB2
+   && satisfies_constraint_Pd (operands[1])"
+  [(parallel[
+    (set (reg:CC_V CC_REGNUM)
+	 (compare:CC_V
+	  (plus:DI (sign_extend:DI (match_dup 0))
+		   (sign_extend:DI (match_dup 1)))
+	  (sign_extend:DI (plus:SI (match_dup 0) (match_dup 1)))))
+    (set (match_dup 2) (plus:SI (match_dup 0) (match_dup 1)))])]
+)
+
+(define_peephole2
+  [(set (reg:CC_V CC_REGNUM)
+	(compare:CC_V
+	  (plus:DI
+	    (sign_extend:DI
+	     (match_operand:SI 0 "low_register_operand"))
+	    (match_operand 1 "const_int_operand"))
+	  (sign_extend:DI (plus:SI (match_dup 0) (match_dup 1)))))]
+  "TARGET_THUMB2
+   && dead_or_set_p (peep2_next_insn (0), operands[0])
+   && satisfies_constraint_Py (operands[1])"
+  [(parallel[
+    (set (reg:CC_V CC_REGNUM)
+	 (compare:CC_V
+	  (plus:DI (sign_extend:DI (match_dup 0))
+		   (sign_extend:DI (match_dup 1)))
+	  (sign_extend:DI (plus:SI (match_dup 0) (match_dup 1)))))
+    (set (match_dup 0) (plus:SI (match_dup 0) (match_dup 1)))])]
+)
+
 (define_insn "addsi3_compare0"
   [(set (reg:CC_NOOV CC_REGNUM)
 	(compare:CC_NOOV