Skip to content

R
riscv-gcc-1
Commit db42e39d by Richard Henderson Committed by Richard Henderson
Options

dwarf2: Reduce some redundant definitions. 

Move some definitions to defaults.h; some simply aren't needed
anymore in the respective dwarf2{cfi,out}.c files.

        * defaults.h (DWARF_CIE_DATA_ALIGNMENT, DWARF_FRAME_RETURN_COLUMN,
        DWARF_FRAME_REGNUM, DWARF2_FRAME_REG_OUT): Move from ...
        * dwarf2cfi.c: ... here.
        (PTR_SIZE, DWARF_OFFSET_SIZE, DWARF_INITIAL_LENGTH_SIZE): Remove.
        (DWARF_ROUND, DWARF_CIE_ID): Remove.
        * dwarf2out.c (INCOMING_RETURN_ADDR_RTX): Remove.
        (DWARF2_FRAME_REG_OUT, DWARF_CIE_DATA_ALIGNMENT): Remove.
        (DWARF_FRAME_RETURN_COLUMN, DWARF_FRAME_REGNUM): Remove.

From-SVN: r176102
parent a8e5c0e7
Showing with 44 additions and 117 deletions
gcc/ChangeLog
2011-07-09 Richard Henderson <rth@redhat.com>
* defaults.h (DWARF_CIE_DATA_ALIGNMENT, DWARF_FRAME_RETURN_COLUMN,
DWARF_FRAME_REGNUM, DWARF2_FRAME_REG_OUT): Move from ...
* dwarf2cfi.c: ... here.
(PTR_SIZE, DWARF_OFFSET_SIZE, DWARF_INITIAL_LENGTH_SIZE): Remove.
(DWARF_ROUND, DWARF_CIE_ID): Remove.
* dwarf2out.c (INCOMING_RETURN_ADDR_RTX): Remove.
(DWARF2_FRAME_REG_OUT, DWARF_CIE_DATA_ALIGNMENT): Remove.
(DWARF_FRAME_RETURN_COLUMN, DWARF_FRAME_REGNUM): Remove.
2011-07-09 Richard Henderson <rth@redhat.com>
* dwarf2cfi.c (cie_return_save): New.
(queue_reg_save): Use compare_reg_or_pc.
(dwarf2out_flush_queued_reg_saves): Handle pc_rtx as return column.
......
gcc/defaults.h
......@@ -413,6 +413,26 @@ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
#define DWARF_FRAME_REGISTERS FIRST_PSEUDO_REGISTER
#endif
/* Offsets recorded in opcodes are a multiple of this alignment factor. */
#ifndef DWARF_CIE_DATA_ALIGNMENT
#ifdef STACK_GROWS_DOWNWARD
#define DWARF_CIE_DATA_ALIGNMENT (-((int) UNITS_PER_WORD))
#else
#define DWARF_CIE_DATA_ALIGNMENT ((int) UNITS_PER_WORD)
#endif
#endif
/* The DWARF 2 CFA column which tracks the return address. Normally this
is the column for PC, or the first column after all of the hard
registers. */
#ifndef DWARF_FRAME_RETURN_COLUMN
#ifdef PC_REGNUM
#define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (PC_REGNUM)
#else
#define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGISTERS
#endif
#endif
/* How to renumber registers for dbx and gdb. If not defined, assume
no renumbering is necessary. */
......@@ -420,6 +440,19 @@ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
#define DBX_REGISTER_NUMBER(REGNO) (REGNO)
#endif
/* The mapping from gcc register number to DWARF 2 CFA column number.
By default, we just provide columns for all registers. */
#ifndef DWARF_FRAME_REGNUM
#define DWARF_FRAME_REGNUM(REG) DBX_REGISTER_NUMBER (REG)
#endif
/* Map register numbers held in the call frame info that gcc has
collected using DWARF_FRAME_REGNUM to those that should be output in
.debug_frame and .eh_frame. */
#ifndef DWARF2_FRAME_REG_OUT
#define DWARF2_FRAME_REG_OUT(REGNO, FOR_EH) (REGNO)
#endif
/* Default sizes for base C types. If the sizes are different for
your target, you should override these values by defining the
appropriate symbols in your tm.h file. */
......
gcc/dwarf2cfi.c
......@@ -55,88 +55,8 @@ along with GCC; see the file COPYING3. If not see
#define INCOMING_RETURN_ADDR_RTX (gcc_unreachable (), NULL_RTX)
#endif
/* The size of the target's pointer type. */
#ifndef PTR_SIZE
#define PTR_SIZE (POINTER_SIZE / BITS_PER_UNIT)
#endif
/* Maximum size (in bytes) of an artificially generated label. */
#define MAX_ARTIFICIAL_LABEL_BYTES 30
/* The size of addresses as they appear in the Dwarf 2 data.
Some architectures use word addresses to refer to code locations,
but Dwarf 2 info always uses byte addresses. On such machines,
Dwarf 2 addresses need to be larger than the architecture's
pointers. */
#ifndef DWARF2_ADDR_SIZE
#define DWARF2_ADDR_SIZE (POINTER_SIZE / BITS_PER_UNIT)
#endif
/* The size in bytes of a DWARF field indicating an offset or length
relative to a debug info section, specified to be 4 bytes in the
DWARF-2 specification. The SGI/MIPS ABI defines it to be the same
as PTR_SIZE. */
#ifndef DWARF_OFFSET_SIZE
#define DWARF_OFFSET_SIZE 4
#endif
/* According to the (draft) DWARF 3 specification, the initial length
should either be 4 or 12 bytes. When it's 12 bytes, the first 4
bytes are 0xffffffff, followed by the length stored in the next 8
bytes.
However, the SGI/MIPS ABI uses an initial length which is equal to
DWARF_OFFSET_SIZE. It is defined (elsewhere) accordingly. */
#ifndef DWARF_INITIAL_LENGTH_SIZE
#define DWARF_INITIAL_LENGTH_SIZE (DWARF_OFFSET_SIZE == 4 ? 4 : 12)
#endif
/* Round SIZE up to the nearest BOUNDARY. */
#define DWARF_ROUND(SIZE,BOUNDARY) \
((((SIZE) + (BOUNDARY) - 1) / (BOUNDARY)) * (BOUNDARY))
/* Offsets recorded in opcodes are a multiple of this alignment factor. */
#ifndef DWARF_CIE_DATA_ALIGNMENT
#ifdef STACK_GROWS_DOWNWARD
#define DWARF_CIE_DATA_ALIGNMENT (-((int) UNITS_PER_WORD))
#else
#define DWARF_CIE_DATA_ALIGNMENT ((int) UNITS_PER_WORD)
#endif
#endif
/* CIE identifier. */
#if HOST_BITS_PER_WIDE_INT >= 64
#define DWARF_CIE_ID \
(unsigned HOST_WIDE_INT) (DWARF_OFFSET_SIZE == 4 ? DW_CIE_ID : DW64_CIE_ID)
#else
#define DWARF_CIE_ID DW_CIE_ID
#endif
/* The DWARF 2 CFA column which tracks the return address. Normally this
is the column for PC, or the first column after all of the hard
registers. */
#ifndef DWARF_FRAME_RETURN_COLUMN
#ifdef PC_REGNUM
#define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (PC_REGNUM)
#else
#define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGISTERS
#endif
#endif
/* The mapping from gcc register number to DWARF 2 CFA column number. By
default, we just provide columns for all registers. */
#ifndef DWARF_FRAME_REGNUM
#define DWARF_FRAME_REGNUM(REG) DBX_REGISTER_NUMBER (REG)
#endif
/* Map register numbers held in the call frame info that gcc has
collected using DWARF_FRAME_REGNUM to those that should be output in
.debug_frame and .eh_frame. */
#ifndef DWARF2_FRAME_REG_OUT
#define DWARF2_FRAME_REG_OUT(REGNO, FOR_EH) (REGNO)
#endif
/* A vector of call frame insns for the CIE. */
cfi_vec cie_cfi_vec;
......
gcc/dwarf2out.c
......@@ -122,17 +122,6 @@ int vms_file_stats_name (const char *, long long *, long *, char *, int *);
#pragma GCC poison DWARF2_UNWIND_INFO DWARF2_FRAME_INFO
#endif
#ifndef INCOMING_RETURN_ADDR_RTX
#define INCOMING_RETURN_ADDR_RTX (gcc_unreachable (), NULL_RTX)
#endif
/* Map register numbers held in the call frame info that gcc has
collected using DWARF_FRAME_REGNUM to those that should be output in
.debug_frame and .eh_frame. */
#ifndef DWARF2_FRAME_REG_OUT
#define DWARF2_FRAME_REG_OUT(REGNO, FOR_EH) (REGNO)
#endif
/* The size of the target's pointer type. */
#ifndef PTR_SIZE
#define PTR_SIZE (POINTER_SIZE / BITS_PER_UNIT)
......@@ -211,15 +200,6 @@ static GTY(()) section *debug_frame_section;
#define DWARF_ROUND(SIZE,BOUNDARY) \
((((SIZE) + (BOUNDARY) - 1) / (BOUNDARY)) * (BOUNDARY))
/* Offsets recorded in opcodes are a multiple of this alignment factor. */
#ifndef DWARF_CIE_DATA_ALIGNMENT
#ifdef STACK_GROWS_DOWNWARD
#define DWARF_CIE_DATA_ALIGNMENT (-((int) UNITS_PER_WORD))
#else
#define DWARF_CIE_DATA_ALIGNMENT ((int) UNITS_PER_WORD)
#endif
#endif
/* CIE identifier. */
#if HOST_BITS_PER_WIDE_INT >= 64
#define DWARF_CIE_ID \
......@@ -309,23 +289,6 @@ static GTY(()) rtx current_unit_personality;
#define LN_PROLOG_AS_LABEL "LASLTP"
#define LN_PROLOG_END_LABEL "LELTP"
#define DIE_LABEL_PREFIX "DW"
/* The DWARF 2 CFA column which tracks the return address. Normally this
is the column for PC, or the first column after all of the hard
registers. */
#ifndef DWARF_FRAME_RETURN_COLUMN
#ifdef PC_REGNUM
#define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (PC_REGNUM)
#else
#define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGISTERS
#endif
#endif
/* The mapping from gcc register number to DWARF 2 CFA column number. By
default, we just provide columns for all registers. */
#ifndef DWARF_FRAME_REGNUM
#define DWARF_FRAME_REGNUM(REG) DBX_REGISTER_NUMBER (REG)
#endif
/* Match the base name of a file to the base name of a compilation unit. */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment