h8300-protos.h: Provide prototypes for h8300_legitimate_constant_p and h8300_legitimate_address_p.

	* config/h8300/h8300-protos.h: Provide prototypes for
	h8300_legitimate_constant_p and h8300_legitimate_address_p.
	* config/h8300/h8300.c (h8300_legitimate_constant_p): New.
	(h8300_rtx_ok_for_base_p): Likewise.
	(h8300_legitimate_address_p): Likewise.
	* config/h8300/h8300.h (LEGITIMATE_CONSTANT_P): Use
	h8300_legitimate_constant_p.
	(RTX_OK_FOR_BASE_P): Remove.
	(GO_IF_LEGITIMATE_ADDRESS): Use h8300_legitimate_address_p.

From-SVN: r76484

gcc/ChangeLog

 2004-01-24  Kazu Hirata  <kazu@cs.umass.edu>
 
+	* config/h8300/h8300-protos.h: Provide prototypes for
+	h8300_legitimate_constant_p and h8300_legitimate_address_p.
+	* config/h8300/h8300.c (h8300_legitimate_constant_p): New.
+	(h8300_rtx_ok_for_base_p): Likewise.
+	(h8300_legitimate_address_p): Likewise.
+	* config/h8300/h8300.h (LEGITIMATE_CONSTANT_P): Use
+	h8300_legitimate_constant_p.
+	(RTX_OK_FOR_BASE_P): Remove.
+	(GO_IF_LEGITIMATE_ADDRESS): Use h8300_legitimate_address_p.
+
+2004-01-24  Kazu Hirata  <kazu@cs.umass.edu>
+
 	* config/h8300/h8300.h (REG_OK_FOR_INDEX_NONSTRICT_P): New.
 	(REG_OK_FOR_BASE_NONSTRICT_P): Likewise.
 	(REG_OK_FOR_INDEX_STRICT_P): Likewise.

gcc/config/h8300/h8300-protos.h

@@ -81,6 +81,9 @@ extern int byte_accesses_mergeable_p (rtx, rtx);
 extern int same_cmp_preceding_p (rtx);
 extern int same_cmp_following_p (rtx);
 
+extern int h8300_legitimate_constant_p (rtx);
+extern int h8300_legitimate_address_p (rtx, int);
+
 /* Used in builtins.c */
 extern rtx h8300_return_addr_rtx (int, rtx);
 #endif /* RTX_CODE */

gcc/config/h8300/h8300.c

@@ -4552,6 +4552,51 @@ h8300_hard_regno_rename_ok (unsigned int old_reg ATTRIBUTE_UNUSED,
 
   return 1;
 }
+
+/* Return nonzero if X is a legitimate constant.  */
+
+int
+h8300_legitimate_constant_p (rtx x ATTRIBUTE_UNUSED)
+{
+  return 1;
+}
+
+/* Return nonzero if X is a REG or SUBREG suitable as a base register.  */
+
+static int
+h8300_rtx_ok_for_base_p (rtx x, int strict)
+{
+  /* Strip off SUBREG if any.  */
+  if (GET_CODE (x) == SUBREG)
+    x = SUBREG_REG (x);
+
+  return (REG_P (x)
+	  && (strict
+	      ? REG_OK_FOR_BASE_STRICT_P (x)
+	      : REG_OK_FOR_BASE_NONSTRICT_P (x)));
+}
+
+/* Return nozero if X is a legitimate address.  On the H8/300, a
+   legitimate address has the form REG, REG+CONSTANT_ADDRESS or
+   CONSTANT_ADDRESS.  */
+
+int
+h8300_legitimate_address_p (rtx x, int strict)
+{
+  /* The register indirect addresses like @er0 is always valid.  */
+  if (h8300_rtx_ok_for_base_p (x, strict))
+    return 1;
+
+  if (CONSTANT_ADDRESS_P (x))
+    return 1;
+
+  if (GET_CODE (x) == PLUS
+      && CONSTANT_ADDRESS_P (XEXP (x, 1))
+      && h8300_rtx_ok_for_base_p (XEXP (x, 0), strict))
+    return 1;
+
+  return 0;
+}
 
 /* Perform target dependent optabs initialization.  */
 static void

gcc/config/h8300/h8300.h

@@ -796,7 +796,7 @@ struct cum_arg
 /* Nonzero if the constant value X is a legitimate general operand.
    It is given that X satisfies CONSTANT_P or is a CONST_DOUBLE.  */
 
-#define LEGITIMATE_CONSTANT_P(X) (1)
+#define LEGITIMATE_CONSTANT_P(X) (h8300_legitimate_constant_p (X))
 
 /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
    and check its validity for a certain class.
@@ -879,31 +879,23 @@ struct cum_arg
    (C) == 'U' ? OK_FOR_U (OP) :			\
    0)
 
-/* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression
-   that is a valid memory address for an instruction.
-   The MODE argument is the machine mode for the MEM expression
-   that wants to use this address.
-
-   The other macros defined here are used only in GO_IF_LEGITIMATE_ADDRESS,
-   except for CONSTANT_ADDRESS_P which is actually
-   machine-independent.
-
-   On the H8/300, a legitimate address has the form
-   REG, REG+CONSTANT_ADDRESS or CONSTANT_ADDRESS.  */
-
-/* Accept either REG or SUBREG where a register is valid.  */
-
-#define RTX_OK_FOR_BASE_P(X)				\
-  ((REG_P (X) && REG_OK_FOR_BASE_P (X))			\
-   || (GET_CODE (X) == SUBREG && REG_P (SUBREG_REG (X))	\
-       && REG_OK_FOR_BASE_P (SUBREG_REG (X))))
-
-#define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR)		\
-  if (RTX_OK_FOR_BASE_P (X)) goto ADDR;			\
-  if (CONSTANT_ADDRESS_P (X)) goto ADDR;		\
-  if (GET_CODE (X) == PLUS				\
-      && CONSTANT_ADDRESS_P (XEXP (X, 1))		\
-      && RTX_OK_FOR_BASE_P (XEXP (X, 0))) goto ADDR;
+#ifndef REG_OK_STRICT
+#define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR)	\
+  do						\
+    {						\
+      if (h8300_legitimate_address_p ((X), 0))	\
+	goto ADDR;				\
+    }						\
+  while (0)
+#else
+#define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR)	\
+  do						\
+    {						\
+      if (h8300_legitimate_address_p ((X), 1))	\
+	goto ADDR;				\
+    }						\
+  while (0)
+#endif
 
 /* Try machine-dependent ways of modifying an illegitimate address
    to be legitimate.  If we find one, return the new, valid address.