Skip to content

R
riscv-gcc-1
Commit b4378319 by Nick Clifton Committed by Nick Clifton
Options

config.gcc: Add v850e-*-* target. 

2002-08-27  Nick Clifton  <nickc@redhat.com>
            Catherine Moore  <clm@redhat.com>
            Jim Wilson  <wilson@cygnus.com>
        * config.gcc: Add v850e-*-* target.
        Add --with-cpu= support for v850.
        * config/v850/lib1funcs.asm: Add v850e callt functions.
        * config/v850/v850.h: Add support for v850e target.
        * config/v850/v850.c: Add functions to support v850e target.
        * config/v850/v850-protos.h: Add prototypes for new functions in v850.c.
        * config/v850/v850.md: Add patterns for v850e instructions.
        * doc/invoke.texi: Document new v850e command line switches.

Co-Authored-By: Catherine Moore <clm@redhat.com>
Co-Authored-By: Jim Wilson <wilson@cygnus.com>

From-SVN: r56612
parent 361d6b42
Showing with 1748 additions and 64 deletions
gcc/ChangeLog
2002-08-27 Nick Clifton <nickc@redhat.com>
Catherine Moore <clm@redhat.com>
Jim Wilson <wilson@cygnus.com>
* config.gcc: Add v850e-*-* target.
Add --with-cpu= support for v850.
* config/v850/lib1funcs.asm: Add v850e callt functions.
* config/v850/v850.h: Add support for v850e target.
* config/v850/v850.c: Add functions to support v850e target.
* config/v850/v850-protos.h: Add prototypes for new functions in v850.c.
* config/v850/v850.md: Add patterns for v850e instructions.
* doc/invoke.texi: Document new v850e command line switches.
Tue Aug 27 18:30:47 2002 J"orn Rennecke <joern.rennecke@superh.com> Tue Aug 27 18:30:47 2002 J"orn Rennecke <joern.rennecke@superh.com>
Aldy Hernandez <aldyh at redhat dot com> Aldy Hernandez <aldyh at redhat dot com>
......
gcc/config.gcc
...@@ -2643,6 +2643,21 @@ v850-*-rtems*) ...@@ -2643,6 +2643,21 @@ v850-*-rtems*)
c_target_objs="v850-c.o" c_target_objs="v850-c.o"
cxx_target_objs="v850-c.o" cxx_target_objs="v850-c.o"
;; ;;
v850e-*-*)
target_cpu_default="TARGET_CPU_v850e"
tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
tm_p_file=v850/v850-protos.h
tmake_file=v850/t-v850
md_file=v850/v850.md
out_file=v850/v850.c
if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
use_collect2=no
c_target_objs="v850-c.o"
cxx_target_objs="v850-c.o"
;;
v850-*-*) v850-*-*)
target_cpu_default="TARGET_CPU_generic" target_cpu_default="TARGET_CPU_generic"
tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
...@@ -2952,6 +2967,22 @@ sparc*-*-*) ...@@ -2952,6 +2967,22 @@ sparc*-*-*)
;; ;;
esac esac
;; ;;
v850*-*-*)
case "x$with_cpu" in
x)
;;
v850e)
target_cpu_default2="TARGET_CPU_$with_cpu"
;;
*)
if test x$pass2done = xyes
then
echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
exit 1
fi
;;
esac
;;
esac esac
if test "$target_cpu_default2" != "" if test "$target_cpu_default2" != ""
......
gcc/config/v850/lib1funcs.asm
/* libgcc routines for NEC V850. /* libgcc routines for NEC V850.
Copyright (C) 1996, 1997 Free Software Foundation, Inc. Copyright (C) 1996, 1997, 2002 Free Software Foundation, Inc.
This file is part of GNU CC. This file is part of GNU CC.
...@@ -1114,7 +1114,7 @@ __return_r29_r31: ...@@ -1114,7 +1114,7 @@ __return_r29_r31:
.type __save_r31,@function .type __save_r31,@function
/* Allocate space and save register 31 on the stack */ /* Allocate space and save register 31 on the stack */
/* Also allocate space for the argument save area */ /* Also allocate space for the argument save area */
/* Called via: jalr __save_r29_r31,r10 */ /* Called via: jalr __save_r31,r10 */
__save_r31: __save_r31:
addi -20,sp,sp addi -20,sp,sp
st.w r31,16[sp] st.w r31,16[sp]
...@@ -1130,7 +1130,7 @@ __return_r31: ...@@ -1130,7 +1130,7 @@ __return_r31:
ld.w 16[sp],r31 ld.w 16[sp],r31
addi 20,sp,sp addi 20,sp,sp
jmp [r31] jmp [r31]
.size __return_r29_r31,.-__return_r29_r31 .size __return_r31,.-__return_r31
#endif /* L_save_31c */ #endif /* L_save_31c */
#ifdef L_save_varargs #ifdef L_save_varargs
...@@ -1267,3 +1267,378 @@ __restore_all_interrupt: ...@@ -1267,3 +1267,378 @@ __restore_all_interrupt:
jmp [r10] jmp [r10]
.size __restore_all_interrupt,.-__restore_all_interrupt .size __restore_all_interrupt,.-__restore_all_interrupt
#endif /* L_save_all_interrupt */ #endif /* L_save_all_interrupt */
#if defined __v850e__
#ifdef L_callt_save_r2_r29
/* Put these functions into the call table area. */
.call_table_text
/* Allocate space and save registers 2, 20 .. 29 on the stack. */
/* Called via: callt ctoff(__callt_save_r2_r29). */
.align 2
.L_save_r2_r29:
add -4, sp
st.w r2, 0[sp]
prepare {r20 - r29}, 0
ctret
/* Restore saved registers, deallocate stack and return to the user. */
/* Called via: callt ctoff(__callt_return_r2_r29). */
.align 2
.L_return_r2_r29:
dispose 0, {r20-r29}
ld.w 0[sp], r2
add 4, sp
jmp [r31]
/* Place the offsets of the start of these routines into the call table. */
.call_table_data
.global __callt_save_r2_r29
.type __callt_save_r2_r29,@function
__callt_save_r2_r29: .short ctoff(.L_save_r2_r29)
.global __callt_return_r2_r29
.type __callt_return_r2_r29,@function
__callt_return_r2_r29: .short ctoff(.L_return_r2_r29)
#endif /* L_callt_save_r2_r29 */
#ifdef L_callt_save_r2_r31
/* Put these functions into the call table area. */
.call_table_text
/* Allocate space and save registers 2 and 20 .. 29, 31 on the stack. */
/* Also allocate space for the argument save area. */
/* Called via: callt ctoff(__callt_save_r2_r31). */
.align 2
.L_save_r2_r31:
add -4, sp
st.w r2, 0[sp]
prepare {r20 - r29, r31}, 4
ctret
/* Restore saved registers, deallocate stack and return to the user. */
/* Called via: callt ctoff(__callt_return_r2_r31). */
.align 2
.L_return_r2_r31:
dispose 4, {r20 - r29, r31}
ld.w 0[sp], r2
addi 4, sp, sp
jmp [r31]
/* Place the offsets of the start of these routines into the call table. */
.call_table_data
.global __callt_save_r2_r31
.type __callt_save_r2_r31,@function
__callt_save_r2_r31: .short ctoff(.L_save_r2_r31)
.global __callt_return_r2_r31
.type __callt_return_r2_r31,@function
__callt_return_r2_r31: .short ctoff(.L_return_r2_r31)
#endif /* L_callt_save_r2_r31 */
#ifdef L_callt_save_r6_r9
/* Put these functions into the call table area. */
.call_table_text
/* Save registers r6 - r9 onto the stack in the space reserved for them.
Use by variable argument functions.
Called via: callt ctoff(__callt_save_r6_r9). */
.align 2
.L_save_r6_r9:
mov ep,r1
mov sp,ep
sst.w r6,0[ep]
sst.w r7,4[ep]
sst.w r8,8[ep]
sst.w r9,12[ep]
mov r1,ep
ctret
/* Place the offsets of the start of this routines into the call table. */
.call_table_data
.global __callt_save_r6_r9
.type __callt_save_r6_r9,@function
__callt_save_r6_r9: .short ctoff(.L_save_r6_r9)
#endif /* L_callt_save_r6_r9 */
#ifdef L_callt_save_interrupt
/* Put this functions into the call table area */
.call_table_text
/* Save registers r1, ep, gp, r10 on stack and load up with expected values. */
/* Called via: callt ctoff(__callt_save_interrupt). */
.align 2
.L_save_interrupt:
/* SP has already been moved before callt ctoff(_save_interrupt). */
/* addi -24, sp, sp */
st.w ep, 0[sp]
st.w gp, 4[sp]
st.w r1, 8[sp]
/* R10 has alread been saved bofore callt ctoff(_save_interrupt). */
/* st.w r10, 12[sp] */
mov hilo(__ep),ep
mov hilo(__gp),gp
ctret
/* Place the offsets of the start of the routine into the call table. */
.call_table_data
.global __callt_save_interrupt
.type __callt_save_interrupt,@function
__callt_save_interrupt: .short ctoff(.L_save_interrupt)
.call_table_text
/* Restore saved registers, deallocate stack and return from the interrupt. */
/* Called via: callt ctoff(__callt_restore_itnerrupt). */
.text
.align 2
.globl __return_interrupt
.type __return_interrupt,@function
.L_return_interrupt:
ld.w 20[sp], r1
ldsr r1, ctpsw
ld.w 16[sp], r1
ldsr r1, ctpc
ld.w 12[sp], r10
ld.w 8[sp], r1
ld.w 4[sp], gp
ld.w 0[sp], ep
addi 24, sp, sp
reti
/* Place the offsets of the start of the routine into the call table. */
.call_table_data
.global __callt_return_interrupt
.type __callt_return_interrupt,@function
__callt_return_interrupt: .short ctoff(.L_return_interrupt)
#endif /* L_callt_save_interrupt */
#ifdef L_callt_save_all_interrupt
/* Put this functions into the call table area. */
.call_table_text
/* Save all registers except for those saved in __save_interrupt. */
/* Allocate enough stack for all of the registers & 16 bytes of space. */
/* Called via: callt ctoff(__callt_save_all_interrupt). */
.align 2
.L_save_all_interrupt:
addi -60, sp, sp
mov ep, r1
mov sp, ep
sst.w r2, 56[ep]
sst.w r5, 52[ep]
sst.w r6, 48[ep]
sst.w r7, 44[ep]
sst.w r8, 40[ep]
sst.w r9, 36[ep]
sst.w r11, 32[ep]
sst.w r12, 28[ep]
sst.w r13, 24[ep]
sst.w r14, 20[ep]
sst.w r15, 16[ep]
sst.w r16, 12[ep]
sst.w r17, 8[ep]
sst.w r18, 4[ep]
sst.w r19, 0[ep]
mov r1, ep
prepare {r20 - r29, r31}, 4
ctret
/* Restore all registers saved in __save_all_interrupt. */
/* & deallocate the stack space. */
/* Called via: callt ctoff(__callt_restore_all_interrupt). */
.align 2
.L_restore_all_interrupt:
dispose 4, {r20 - r29, r31}
mov ep, r1
mov sp, ep
sld.w 0 [ep], r19
sld.w 4 [ep], r18
sld.w 8 [ep], r17
sld.w 12[ep], r16
sld.w 16[ep], r15
sld.w 20[ep], r14
sld.w 24[ep], r13
sld.w 28[ep], r12
sld.w 32[ep], r11
sld.w 36[ep], r9
sld.w 40[ep], r8
sld.w 44[ep], r7
sld.w 48[ep], r6
sld.w 52[ep], r5
sld.w 56[ep], r2
mov r1, ep
addi 60, sp, sp
ctret
/* Place the offsets of the start of these routines into the call table. */
.call_table_data
.global __callt_save_all_interrupt
.type __callt_save_all_interrupt,@function
__callt_save_all_interrupt: .short ctoff(.L_save_all_interrupt)
.global __callt_restore_all_interrupt
.type __callt_restore_all_interrupt,@function
__callt_restore_all_interrupt: .short ctoff(.L_restore_all_interrupt)
#endif /* L_callt_save_all_interrupt */
#define MAKE_CALLT_FUNCS( START ) \
.call_table_text ;\
.align 2 ;\
/* Allocate space and save registers START .. r29 on the stack. */ ;\
/* Called via: callt ctoff(__callt_save_START_r29). */ ;\
.L_save_##START##_r29: ;\
prepare { START - r29 }, 0 ;\
ctret ;\
;\
/* Restore saved registers, deallocate stack and return. */ ;\
/* Called via: callt ctoff(__return_START_r29) */ ;\
.align 2 ;\
.L_return_##START##_r29: ;\
dispose 0, { START - r29 }, r31 ;\
;\
/* Place the offsets of the start of these funcs into the call table. */;\
.call_table_data ;\
;\
.global __callt_save_##START##_r29 ;\
.type __callt_save_##START##_r29,@function ;\
__callt_save_##START##_r29: .short ctoff(.L_save_##START##_r29 ) ;\
;\
.global __callt_return_##START##_r29 ;\
.type __callt_return_##START##_r29,@function ;\
__callt_return_##START##_r29: .short ctoff(.L_return_##START##_r29 )
#define MAKE_CALLT_CFUNCS( START ) \
.call_table_text ;\
.align 2 ;\
/* Allocate space and save registers START .. r31 on the stack. */ ;\
/* Called via: callt ctoff(__callt_save_START_r31c). */ ;\
.L_save_##START##_r31c: ;\
prepare { START - r29, r31}, 4 ;\
ctret ;\
;\
/* Restore saved registers, deallocate stack and return. */ ;\
/* Called via: callt ctoff(__return_START_r31c). */ ;\
.align 2 ;\
.L_return_##START##_r31c: ;\
dispose 4, { START - r29, r31}, r31 ;\
;\
/* Place the offsets of the start of these funcs into the call table. */;\
.call_table_data ;\
;\
.global __callt_save_##START##_r31c ;\
.type __callt_save_##START##_r31c,@function ;\
__callt_save_##START##_r31c: .short ctoff(.L_save_##START##_r31c ) ;\
;\
.global __callt_return_##START##_r31c ;\
.type __callt_return_##START##_r31c,@function ;\
__callt_return_##START##_r31c: .short ctoff(.L_return_##START##_r31c )
#ifdef L_callt_save_20
MAKE_CALLT_FUNCS (r20)
#endif
#ifdef L_callt_save_21
MAKE_CALLT_FUNCS (r21)
#endif
#ifdef L_callt_save_22
MAKE_CALLT_FUNCS (r22)
#endif
#ifdef L_callt_save_23
MAKE_CALLT_FUNCS (r23)
#endif
#ifdef L_callt_save_24
MAKE_CALLT_FUNCS (r24)
#endif
#ifdef L_callt_save_25
MAKE_CALLT_FUNCS (r25)
#endif
#ifdef L_callt_save_26
MAKE_CALLT_FUNCS (r26)
#endif
#ifdef L_callt_save_27
MAKE_CALLT_FUNCS (r27)
#endif
#ifdef L_callt_save_28
MAKE_CALLT_FUNCS (r28)
#endif
#ifdef L_callt_save_29
MAKE_CALLT_FUNCS (r29)
#endif
#ifdef L_callt_save_20c
MAKE_CALLT_CFUNCS (r20)
#endif
#ifdef L_callt_save_21c
MAKE_CALLT_CFUNCS (r21)
#endif
#ifdef L_callt_save_22c
MAKE_CALLT_CFUNCS (r22)
#endif
#ifdef L_callt_save_23c
MAKE_CALLT_CFUNCS (r23)
#endif
#ifdef L_callt_save_24c
MAKE_CALLT_CFUNCS (r24)
#endif
#ifdef L_callt_save_25c
MAKE_CALLT_CFUNCS (r25)
#endif
#ifdef L_callt_save_26c
MAKE_CALLT_CFUNCS (r26)
#endif
#ifdef L_callt_save_27c
MAKE_CALLT_CFUNCS (r27)
#endif
#ifdef L_callt_save_28c
MAKE_CALLT_CFUNCS (r28)
#endif
#ifdef L_callt_save_29c
MAKE_CALLT_CFUNCS (r29)
#endif
#ifdef L_callt_save_31c
.call_table_text
.align 2
/* Allocate space and save register r31 on the stack. */
/* Called via: callt ctoff(__callt_save_r31c). */
.L_callt_save_r31c:
prepare {r31}, 4
ctret
/* Restore saved registers, deallocate stack and return. */
/* Called via: callt ctoff(__return_r31c). */
.align 2
.L_callt_return_r31c:
dispose 4, {r31}, r31
/* Place the offsets of the start of these funcs into the call table. */
.call_table_data
.global __callt_save_r31c
.type __callt_save_r31c,@function
__callt_save_r31c: .short ctoff(.L_callt_save_r31c)
.global __callt_return_r31c
.type __callt_return_r31c,@function
__callt_return_r31c: .short ctoff(.L_callt_return_r31c)
#endif
#endif /* __v850e__ */
gcc/config/v850/t-v850
...@@ -29,7 +29,34 @@ LIB1ASMFUNCS = _mulsi3 \ ...@@ -29,7 +29,34 @@ LIB1ASMFUNCS = _mulsi3 \
_save_31c \ _save_31c \
_save_varargs \ _save_varargs \
_save_interrupt \ _save_interrupt \
_save_all_interrupt _save_all_interrupt \
_callt_save_20 \
_callt_save_21 \
_callt_save_22 \
_callt_save_23 \
_callt_save_24 \
_callt_save_25 \
_callt_save_26 \
_callt_save_27 \
_callt_save_28 \
_callt_save_29 \
_callt_save_20c \
_callt_save_21c \
_callt_save_22c \
_callt_save_23c \
_callt_save_24c \
_callt_save_25c \
_callt_save_26c \
_callt_save_27c \
_callt_save_28c \
_callt_save_29c \
_callt_save_31c \
_callt_save_varargs \
_callt_save_interrupt \
_callt_save_all_interrupt \
_callt_save_r2_r29 \
_callt_save_r2_r31 \
_callt_save_r6_r9
# We want fine grained libraries, so use the new code to build the # We want fine grained libraries, so use the new code to build the
# floating point emulation libraries. # floating point emulation libraries.
...@@ -50,6 +77,8 @@ fp-bit.c: $(srcdir)/config/fp-bit.c ...@@ -50,6 +77,8 @@ fp-bit.c: $(srcdir)/config/fp-bit.c
cat $(srcdir)/config/fp-bit.c >> fp-bit.c cat $(srcdir)/config/fp-bit.c >> fp-bit.c
TCFLAGS = -Wa,-mwarn-signed-overflow -Wa,-mwarn-unsigned-overflow TCFLAGS = -Wa,-mwarn-signed-overflow -Wa,-mwarn-unsigned-overflow
# Create non-target specific versions of the libraries
TCFLAGS += -mno-app-regs -msmall-sld -mv850 -D__v850e__ -Wa,-mv850any
v850-c.o: $(srcdir)/config/v850/v850-c.c $(RTL_H) $(TREE_H) $(CONFIG_H) v850-c.o: $(srcdir)/config/v850/v850-c.c $(RTL_H) $(TREE_H) $(CONFIG_H)
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $< $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $<
......
gcc/config/v850/v850-protos.h
...@@ -53,6 +53,10 @@ extern void notice_update_cc PARAMS ((rtx, rtx)); ...@@ -53,6 +53,10 @@ extern void notice_update_cc PARAMS ((rtx, rtx));
extern char * construct_save_jarl PARAMS ((rtx)); extern char * construct_save_jarl PARAMS ((rtx));
extern char * construct_restore_jr PARAMS ((rtx)); extern char * construct_restore_jr PARAMS ((rtx));
#ifdef HAVE_MACHINE_MODES #ifdef HAVE_MACHINE_MODES
extern char * construct_dispose_instruction PARAMS ((rtx));
extern char * construct_prepare_instruction PARAMS ((rtx));
extern int pattern_is_ok_for_prepare PARAMS ((rtx, Mmode));
extern int pattern_is_ok_for_dispose PARAMS ((rtx, Mmode));
extern int ep_memory_operand PARAMS ((rtx, Mmode, int)); extern int ep_memory_operand PARAMS ((rtx, Mmode, int));
extern int reg_or_0_operand PARAMS ((rtx, Mmode)); extern int reg_or_0_operand PARAMS ((rtx, Mmode));
extern int reg_or_int5_operand PARAMS ((rtx, Mmode)); extern int reg_or_int5_operand PARAMS ((rtx, Mmode));
......
gcc/config/v850/v850.c
...@@ -142,6 +142,13 @@ override_options () ...@@ -142,6 +142,13 @@ override_options ()
} }
} }
} }
/* Make sure that the US_BIT_SET mask has been correctly initialised. */
if ((target_flags & MASK_US_MASK_SET) == 0)
{
target_flags |= MASK_US_MASK_SET;
target_flags &= ~MASK_US_BIT_SET;
}
} }
...@@ -176,6 +183,9 @@ function_arg (cum, mode, type, named) ...@@ -176,6 +183,9 @@ function_arg (cum, mode, type, named)
else else
size = GET_MODE_SIZE (mode); size = GET_MODE_SIZE (mode);
if (size < 1)
return 0;
if (type) if (type)
align = TYPE_ALIGN (type) / BITS_PER_UNIT; align = TYPE_ALIGN (type) / BITS_PER_UNIT;
else else
...@@ -696,6 +706,38 @@ print_operand_address (file, addr) ...@@ -696,6 +706,38 @@ print_operand_address (file, addr)
} }
} }
/* When assemble_integer is used to emit the offsets for a switch
table it can encounter (TRUNCATE:HI (MINUS:SI (LABEL_REF:SI) (LABEL_REF:SI))).
output_addr_const will normally barf at this, but it is OK to omit
the truncate and just emit the difference of the two labels. The
.hword directive will automatically handle the truncation for us.
Returns 1 if rtx was handled, 0 otherwise. */
int
v850_output_addr_const_extra (file, x)
FILE * file;
rtx x;
{
if (GET_CODE (x) != TRUNCATE)
return 0;
x = XEXP (x, 0);
/* We must also handle the case where the switch table was passed a
constant value and so has been collapsed. In this case the first
label will have been deleted. In such a case it is OK to emit
nothing, since the table will not be used.
(cf gcc.c-torture/compile/990801-1.c). */
if (GET_CODE (x) == MINUS
&& GET_CODE (XEXP (x, 0)) == LABEL_REF
&& GET_CODE (XEXP (XEXP (x, 0), 0)) == CODE_LABEL
&& INSN_DELETED_P (XEXP (XEXP (x, 0), 0)))
return 1;
output_addr_const (file, x);
return 1;
}
/* Return appropriate code to load up a 1, 2, or 4 integer/floating /* Return appropriate code to load up a 1, 2, or 4 integer/floating
point value. */ point value. */
...@@ -716,16 +758,19 @@ output_move_single (operands) ...@@ -716,16 +758,19 @@ output_move_single (operands)
{ {
HOST_WIDE_INT value = INTVAL (src); HOST_WIDE_INT value = INTVAL (src);
if (CONST_OK_FOR_J (value)) /* signed 5 bit immediate */ if (CONST_OK_FOR_J (value)) /* Signed 5 bit immediate. */
return "mov %1,%0"; return "mov %1,%0";
else if (CONST_OK_FOR_K (value)) /* signed 16 bit immediate */ else if (CONST_OK_FOR_K (value)) /* Signed 16 bit immediate. */
return "movea lo(%1),%.,%0"; return "movea lo(%1),%.,%0";
else if (CONST_OK_FOR_L (value)) /* upper 16 bits were set */ else if (CONST_OK_FOR_L (value)) /* Upper 16 bits were set. */
return "movhi hi(%1),%.,%0"; return "movhi hi(%1),%.,%0";
else /* random constant */ /* A random constant. */
else if (TARGET_V850E)
return "mov %1,%0";
else
return "movhi hi(%1),%.,%0\n\tmovea lo(%1),%0,%0"; return "movhi hi(%1),%.,%0\n\tmovea lo(%1),%0,%0";
} }
...@@ -734,16 +779,21 @@ output_move_single (operands) ...@@ -734,16 +779,21 @@ output_move_single (operands)
HOST_WIDE_INT high, low; HOST_WIDE_INT high, low;
const_double_split (src, &high, &low); const_double_split (src, &high, &low);
if (CONST_OK_FOR_J (high)) /* signed 5 bit immediate */
if (CONST_OK_FOR_J (high)) /* Signed 5 bit immediate. */
return "mov %F1,%0"; return "mov %F1,%0";
else if (CONST_OK_FOR_K (high)) /* signed 16 bit immediate */ else if (CONST_OK_FOR_K (high)) /* Signed 16 bit immediate. */
return "movea lo(%F1),%.,%0"; return "movea lo(%F1),%.,%0";
else if (CONST_OK_FOR_L (high)) /* upper 16 bits were set */ else if (CONST_OK_FOR_L (high)) /* Upper 16 bits were set. */
return "movhi hi(%F1),%.,%0"; return "movhi hi(%F1),%.,%0";
else /* random constant */ /* A random constant. */
else if (TARGET_V850E)
return "mov %F1,%0";
else
return "movhi hi(%F1),%.,%0\n\tmovea lo(%F1),%0,%0"; return "movhi hi(%F1),%.,%0\n\tmovea lo(%F1),%0,%0";
} }
...@@ -757,7 +807,10 @@ output_move_single (operands) ...@@ -757,7 +807,10 @@ output_move_single (operands)
|| GET_CODE (src) == SYMBOL_REF || GET_CODE (src) == SYMBOL_REF
|| GET_CODE (src) == CONST) || GET_CODE (src) == CONST)
{ {
return "movhi hi(%1),%.,%0\n\tmovea lo(%1),%0,%0"; if (TARGET_V850E)
return "mov hilo(%1),%0";
else
return "movhi hi(%1),%.,%0\n\tmovea lo(%1),%0,%0";
} }
else if (GET_CODE (src) == HIGH) else if (GET_CODE (src) == HIGH)
...@@ -881,11 +934,25 @@ ep_memory_offset (mode, unsignedp) ...@@ -881,11 +934,25 @@ ep_memory_offset (mode, unsignedp)
switch (mode) switch (mode)
{ {
case QImode: case QImode:
max_offset = (1 << 7); if (TARGET_SMALL_SLD)
max_offset = (1 << 4);
else if (TARGET_V850E
&& ( ( unsignedp && ! TARGET_US_BIT_SET)
|| (! unsignedp && TARGET_US_BIT_SET)))
max_offset = (1 << 4);
else
max_offset = (1 << 7);
break; break;
case HImode: case HImode:
max_offset = (1 << 8); if (TARGET_SMALL_SLD)
max_offset = (1 << 5);
else if (TARGET_V850E
&& ( ( unsignedp && ! TARGET_US_BIT_SET)
|| (! unsignedp && TARGET_US_BIT_SET)))
max_offset = (1 << 5);
else
max_offset = (1 << 8);
break; break;
case SImode: case SImode:
...@@ -985,6 +1052,32 @@ reg_or_int5_operand (op, mode) ...@@ -985,6 +1052,32 @@ reg_or_int5_operand (op, mode)
return register_operand (op, mode); return register_operand (op, mode);
} }
/* Return true if OP is either a register or a signed nine bit integer. */
int
reg_or_int9_operand (op, mode)
rtx op;
enum machine_mode mode;
{
if (GET_CODE (op) == CONST_INT)
return CONST_OK_FOR_O (INTVAL (op));
return register_operand (op, mode);
}
/* Return true if OP is either a register or a const integer. */
int
reg_or_const_operand (op, mode)
rtx op;
enum machine_mode mode;
{
if (GET_CODE (op) == CONST_INT)
return TRUE;
return register_operand (op, mode);
}
/* Return true if OP is a valid call operand. */ /* Return true if OP is a valid call operand. */
int int
...@@ -1129,6 +1222,16 @@ Saved %d bytes (%d uses of register %s) in function %s, starting as insn %d, end ...@@ -1129,6 +1222,16 @@ Saved %d bytes (%d uses of register %s) in function %s, starting as insn %d, end
else if (GET_CODE (SET_SRC (pattern)) == MEM) else if (GET_CODE (SET_SRC (pattern)) == MEM)
p_mem = &SET_SRC (pattern); p_mem = &SET_SRC (pattern);
else if (GET_CODE (SET_SRC (pattern)) == SIGN_EXTEND
&& GET_CODE (XEXP (SET_SRC (pattern), 0)) == MEM)
p_mem = &XEXP (SET_SRC (pattern), 0);
else if (GET_CODE (SET_SRC (pattern)) == ZERO_EXTEND
&& GET_CODE (XEXP (SET_SRC (pattern), 0)) == MEM)
{
p_mem = &XEXP (SET_SRC (pattern), 0);
unsignedp = TRUE;
}
else else
p_mem = (rtx *)0; p_mem = (rtx *)0;
...@@ -1278,6 +1381,16 @@ void v850_reorg (start_insn) ...@@ -1278,6 +1381,16 @@ void v850_reorg (start_insn)
else if (GET_CODE (src) == MEM) else if (GET_CODE (src) == MEM)
mem = src; mem = src;
else if (GET_CODE (src) == SIGN_EXTEND
&& GET_CODE (XEXP (src, 0)) == MEM)
mem = XEXP (src, 0);
else if (GET_CODE (src) == ZERO_EXTEND
&& GET_CODE (XEXP (src, 0)) == MEM)
{
mem = XEXP (src, 0);
unsignedp = TRUE;
}
else else
mem = NULL_RTX; mem = NULL_RTX;
...@@ -1531,8 +1644,11 @@ expand_prologue () ...@@ -1531,8 +1644,11 @@ expand_prologue ()
/* Save/setup global registers for interrupt functions right now. */ /* Save/setup global registers for interrupt functions right now. */
if (interrupt_handler) if (interrupt_handler)
{ {
if (TARGET_V850E && ! TARGET_DISABLE_CALLT)
emit_insn (gen_callt_save_interrupt ());
else
emit_insn (gen_save_interrupt ()); emit_insn (gen_save_interrupt ());
actual_fsize -= INTERRUPT_FIXED_SAVE_SIZE; actual_fsize -= INTERRUPT_FIXED_SAVE_SIZE;
if (((1L << LINK_POINTER_REGNUM) & reg_saved) != 0) if (((1L << LINK_POINTER_REGNUM) & reg_saved) != 0)
...@@ -1544,7 +1660,10 @@ expand_prologue () ...@@ -1544,7 +1660,10 @@ expand_prologue ()
{ {
if (TARGET_PROLOG_FUNCTION) if (TARGET_PROLOG_FUNCTION)
{ {
emit_insn (gen_save_r6_r9 ()); if (TARGET_V850E && ! TARGET_DISABLE_CALLT)
emit_insn (gen_save_r6_r9_v850e ());
else
emit_insn (gen_save_r6_r9 ());
} }
else else
{ {
...@@ -1656,7 +1775,10 @@ Saved %d bytes via prologue function (%d vs. %d) for function %s\n", ...@@ -1656,7 +1775,10 @@ Saved %d bytes via prologue function (%d vs. %d) for function %s\n",
/* Special case interrupt functions that save all registers for a call. */ /* Special case interrupt functions that save all registers for a call. */
if (interrupt_handler && ((1L << LINK_POINTER_REGNUM) & reg_saved) != 0) if (interrupt_handler && ((1L << LINK_POINTER_REGNUM) & reg_saved) != 0)
{ {
emit_insn (gen_save_all_interrupt ()); if (TARGET_V850E && ! TARGET_DISABLE_CALLT)
emit_insn (gen_callt_save_all_interrupt ());
else
emit_insn (gen_save_all_interrupt ());
} }
else else
{ {
...@@ -1888,7 +2010,10 @@ Saved %d bytes via epilogue function (%d vs. %d) in function %s\n", ...@@ -1888,7 +2010,10 @@ Saved %d bytes via epilogue function (%d vs. %d) in function %s\n",
for a call. */ for a call. */
if (interrupt_handler && ((1L << LINK_POINTER_REGNUM) & reg_saved) != 0) if (interrupt_handler && ((1L << LINK_POINTER_REGNUM) & reg_saved) != 0)
{ {
emit_insn (gen_restore_all_interrupt ()); if (TARGET_V850E && ! TARGET_DISABLE_CALLT)
emit_insn (gen_callt_restore_all_interrupt ());
else
emit_insn (gen_restore_all_interrupt ());
} }
else else
{ {
...@@ -1926,7 +2051,12 @@ Saved %d bytes via epilogue function (%d vs. %d) in function %s\n", ...@@ -1926,7 +2051,12 @@ Saved %d bytes via epilogue function (%d vs. %d) in function %s\n",
/* And return or use reti for interrupt handlers. */ /* And return or use reti for interrupt handlers. */
if (interrupt_handler) if (interrupt_handler)
emit_jump_insn (gen_restore_interrupt ()); {
if (TARGET_V850E && ! TARGET_DISABLE_CALLT)
emit_insn (gen_callt_return_interrupt ());
else
emit_jump_insn (gen_return_interrupt ());
}
else if (actual_fsize) else if (actual_fsize)
emit_jump_insn (gen_return_internal ()); emit_jump_insn (gen_return_internal ());
else else
...@@ -2233,10 +2363,9 @@ register_is_ok_for_epilogue (op, mode) ...@@ -2233,10 +2363,9 @@ register_is_ok_for_epilogue (op, mode)
rtx op; rtx op;
enum machine_mode ATTRIBUTE_UNUSED mode; enum machine_mode ATTRIBUTE_UNUSED mode;
{ {
/* The save/restore routines can only cope with registers 2, and 20 - 31 */ /* The save/restore routines can only cope with registers 20 - 31. */
return (GET_CODE (op) == REG) return ((GET_CODE (op) == REG)
&& (((REGNO (op) >= 20) && REGNO (op) <= 31) && (((REGNO (op) >= 20) && REGNO (op) <= 31)));
|| REGNO (op) == 2);
} }
/* Return non-zero if the given RTX is suitable for collapsing into /* Return non-zero if the given RTX is suitable for collapsing into
...@@ -2817,6 +2946,392 @@ v850_insert_attributes (decl, attr_ptr) ...@@ -2817,6 +2946,392 @@ v850_insert_attributes (decl, attr_ptr)
} }
} }
} }
/* Return non-zero if the given RTX is suitable
for collapsing into a DISPOSE instruction. */
int
pattern_is_ok_for_dispose (op, mode)
rtx op;
enum machine_mode mode ATTRIBUTE_UNUSED;
{
int count = XVECLEN (op, 0);
int i;
/* If there are no registers to restore then
the dispose instruction is not suitable. */
if (count <= 2)
return 0;
/* The pattern matching has already established that we are performing a
function epilogue and that we are popping at least one register. We must
now check the remaining entries in the vector to make sure that they are
also register pops. There is no good reason why there should ever be
anything else in this vector, but being paranoid always helps...
The test below performs the C equivalent of this machine description
pattern match:
(set (match_operand:SI n "register_is_ok_for_epilogue" "r")
(mem:SI (plus:SI (reg:SI 3)
(match_operand:SI n "immediate_operand" "i"))))
*/
for (i = 3; i < count; i++)
{
rtx vector_element = XVECEXP (op, 0, i);
rtx dest;
rtx src;
rtx plus;
if (GET_CODE (vector_element) != SET)
return 0;
dest = SET_DEST (vector_element);
src = SET_SRC (vector_element);
if ( GET_CODE (dest) != REG
|| GET_MODE (dest) != SImode
|| ! register_is_ok_for_epilogue (dest, SImode)
|| GET_CODE (src) != MEM
|| GET_MODE (src) != SImode)
return 0;
plus = XEXP (src, 0);
if ( GET_CODE (plus) != PLUS
|| GET_CODE (XEXP (plus, 0)) != REG
|| GET_MODE (XEXP (plus, 0)) != SImode
|| REGNO (XEXP (plus, 0)) != STACK_POINTER_REGNUM
|| GET_CODE (XEXP (plus, 1)) != CONST_INT)
return 0;
}
return 1;
}
/* Construct a DISPOSE instruction that is the equivalent of
the given RTX. We have already verified that this should
be possible. */
char *
construct_dispose_instruction (op)
rtx op;
{
int count = XVECLEN (op, 0);
int stack_bytes;
unsigned long int mask;
int i;
static char buff[ 100 ]; /* XXX */
int use_callt = 0;
if (count <= 2)
{
error ("Bogus DISPOSE construction: %d\n", count);
return NULL;
}
/* Work out how many bytes to pop off the
stack before retrieving registers. */
if (GET_CODE (XVECEXP (op, 0, 1)) != SET)
abort ();
if (GET_CODE (SET_SRC (XVECEXP (op, 0, 1))) != PLUS)
abort ();
if (GET_CODE (XEXP (SET_SRC (XVECEXP (op, 0, 1)), 1)) != CONST_INT)
abort ();
stack_bytes = INTVAL (XEXP (SET_SRC (XVECEXP (op, 0, 1)), 1));
/* Each pop will remove 4 bytes from the stack... */
stack_bytes -= (count - 2) * 4;
/* Make sure that the amount we are popping
will fit into the DISPOSE instruction. */
if (stack_bytes > 128)
{
error ("Too much stack space to dispose of: %d", stack_bytes);
return NULL;
}
/* Now compute the bit mask of registers to push. */
mask = 0;
for (i = 2; i < count; i++)
{
rtx vector_element = XVECEXP (op, 0, i);
if (GET_CODE (vector_element) != SET)
abort ();
if (GET_CODE (SET_DEST (vector_element)) != REG)
abort ();
if (! register_is_ok_for_epilogue (SET_DEST (vector_element), SImode))
abort ();
if (REGNO (SET_DEST (vector_element)) == 2)
use_callt = 1;
else
mask |= 1 << REGNO (SET_DEST (vector_element));
}
if (! TARGET_DISABLE_CALLT
&& (use_callt || stack_bytes == 0 || stack_bytes == 16))
{
if (use_callt)
{
sprintf (buff, "callt ctoff(__callt_return_r2_r%d)", (mask & (1 << 31)) ? 31 : 29);
return buff;
}
else
{
for (i = 20; i < 32; i++)
if (mask & (1 << i))
break;
if (i == 31)
sprintf (buff, "callt ctoff(__callt_return_r31c)");
else
sprintf (buff, "callt ctoff(__callt_return_r%d_r%d%s)",
i, (mask & (1 << 31)) ? 31 : 29, stack_bytes ? "c" : "");
}
}
else
{
static char regs [100]; /* XXX */
int done_one;
/* Generate the DISPOSE instruction. Note we could just issue the
bit mask as a number as the assembler can cope with this, but for
the sake of our readers we turn it into a textual description. */
regs[0] = 0;
done_one = 0;
for (i = 20; i < 32; i++)
{
if (mask & (1 << i))
{
int first;
if (done_one)
strcat (regs, ", ");
else
done_one = 1;
first = i;
strcat (regs, reg_names[ first ]);
for (i++; i < 32; i++)
if ((mask & (1 << i)) == 0)
break;
if (i > first + 1)
{
strcat (regs, " - ");
strcat (regs, reg_names[ i - 1 ] );
}
}
}
sprintf (buff, "dispose %d {%s}, r31", stack_bytes / 4, regs);
}
return buff;
}
/* Return non-zero if the given RTX is suitable
for collapsing into a PREPARE instruction. */
int
pattern_is_ok_for_prepare (op, mode)
rtx op;
enum machine_mode mode ATTRIBUTE_UNUSED;
{
int count = XVECLEN (op, 0);
int i;
/* If there are no registers to restore then the prepare instruction
is not suitable. */
if (count <= 1)
return 0;
/* The pattern matching has already established that we are adjusting the
stack and pushing at least one register. We must now check that the
remaining entries in the vector to make sure that they are also register
pushes.
The test below performs the C equivalent of this machine description
pattern match:
(set (mem:SI (plus:SI (reg:SI 3)
(match_operand:SI 2 "immediate_operand" "i")))
(match_operand:SI 3 "register_is_ok_for_epilogue" "r"))
*/
for (i = 2; i < count; i++)
{
rtx vector_element = XVECEXP (op, 0, i);
rtx dest;
rtx src;
rtx plus;
if (GET_CODE (vector_element) != SET)
return 0;
dest = SET_DEST (vector_element);
src = SET_SRC (vector_element);
if ( GET_CODE (dest) != MEM
|| GET_MODE (dest) != SImode
|| GET_CODE (src) != REG
|| GET_MODE (src) != SImode
|| ! register_is_ok_for_epilogue (src, SImode)
)
return 0;
plus = XEXP (dest, 0);
if ( GET_CODE (plus) != PLUS
|| GET_CODE (XEXP (plus, 0)) != REG
|| GET_MODE (XEXP (plus, 0)) != SImode
|| REGNO (XEXP (plus, 0)) != STACK_POINTER_REGNUM
|| GET_CODE (XEXP (plus, 1)) != CONST_INT)
return 0;
/* If the register is being pushed somewhere other than the stack
space just aquired by the first operand then abandon this quest.
Note: the test is <= becuase both values are negative. */
if (INTVAL (XEXP (plus, 1))
<= INTVAL (XEXP (SET_SRC (XVECEXP (op, 0, 0)), 1)))
return 0;
}
return 1;
}
/* Construct a PREPARE instruction that is the equivalent of
the given RTL. We have already verified that this should
be possible. */
char *
construct_prepare_instruction (op)
rtx op;
{
int count = XVECLEN (op, 0);
int stack_bytes;
unsigned long int mask;
int i;
static char buff[ 100 ]; /* XXX */
int use_callt = 0;
if (count <= 1)
{
error ("Bogus PREPEARE construction: %d\n", count);
return NULL;
}
/* Work out how many bytes to push onto
the stack after storing the registers. */
if (GET_CODE (XVECEXP (op, 0, 0)) != SET)
abort ();
if (GET_CODE (SET_SRC (XVECEXP (op, 0, 0))) != PLUS)
abort ();
if (GET_CODE (XEXP (SET_SRC (XVECEXP (op, 0, 0)), 1)) != CONST_INT)
abort ();
stack_bytes = INTVAL (XEXP (SET_SRC (XVECEXP (op, 0, 0)), 1));
/* Each push will put 4 bytes from the stack. */
stack_bytes += (count - 1) * 4;
/* Make sure that the amount we are popping
will fit into the DISPOSE instruction. */
if (stack_bytes < -128)
{
error ("Too much stack space to prepare: %d", stack_bytes);
return NULL;
}
/* Now compute the bit mask of registers to push. */
mask = 0;
for (i = 1; i < count; i++)
{
rtx vector_element = XVECEXP (op, 0, i);
if (GET_CODE (vector_element) != SET)
abort ();
if (GET_CODE (SET_SRC (vector_element)) != REG)
abort ();
if (! register_is_ok_for_epilogue (SET_SRC (vector_element), SImode))
abort ();
if (REGNO (SET_SRC (vector_element)) == 2)
use_callt = 1;
else
mask |= 1 << REGNO (SET_SRC (vector_element));
}
if ((! TARGET_DISABLE_CALLT)
&& (use_callt || stack_bytes == 0 || stack_bytes == -16))
{
if (use_callt)
{
sprintf (buff, "callt ctoff(__callt_save_r2_r%d)", (mask & (1 << 31)) ? 31 : 29 );
return buff;
}
for (i = 20; i < 32; i++)
if (mask & (1 << i))
break;
if (i == 31)
sprintf (buff, "callt ctoff(__callt_save_r31c)");
else
sprintf (buff, "callt ctoff(__callt_save_r%d_r%d%s)",
i, (mask & (1 << 31)) ? 31 : 29, stack_bytes ? "c" : "");
}
else
{
static char regs [100]; /* XXX */
int done_one;
/* Generate the PREPARE instruction. Note we could just issue the
bit mask as a number as the assembler can cope with this, but for
the sake of our readers we turn it into a textual description. */
regs[0] = 0;
done_one = 0;
for (i = 20; i < 32; i++)
{
if (mask & (1 << i))
{
int first;
if (done_one)
strcat (regs, ", ");
else
done_one = 1;
first = i;
strcat (regs, reg_names[ first ]);
for (i++; i < 32; i++)
if ((mask & (1 << i)) == 0)
break;
if (i > first + 1)
{
strcat (regs, " - ");
strcat (regs, reg_names[ i - 1 ] );
}
}
}
sprintf (buff, "prepare {%s}, %d", regs, (- stack_bytes) / 4);
}
return buff;
}
/* Implement `va_arg'. */ /* Implement `va_arg'. */
......
gcc/config/v850/v850.h
...@@ -31,8 +31,8 @@ Boston, MA 02111-1307, USA. */ ...@@ -31,8 +31,8 @@ Boston, MA 02111-1307, USA. */
#undef STARTFILE_SPEC #undef STARTFILE_SPEC
#undef ASM_SPEC #undef ASM_SPEC
#define TARGET_CPU_generic 1 #define TARGET_CPU_generic 1
#define TARGET_CPU_v850e 2
#ifndef TARGET_CPU_DEFAULT #ifndef TARGET_CPU_DEFAULT
#define TARGET_CPU_DEFAULT TARGET_CPU_generic #define TARGET_CPU_DEFAULT TARGET_CPU_generic
...@@ -43,9 +43,22 @@ Boston, MA 02111-1307, USA. */ ...@@ -43,9 +43,22 @@ Boston, MA 02111-1307, USA. */
#define SUBTARGET_CPP_SPEC "%{!mv*:-D__v850__}" #define SUBTARGET_CPP_SPEC "%{!mv*:-D__v850__}"
#define TARGET_VERSION fprintf (stderr, " (NEC V850)"); #define TARGET_VERSION fprintf (stderr, " (NEC V850)");
/* Choose which processor will be the default.
We must pass a -mv850xx option to the assembler if no explicit -mv* option
is given, because the assembler's processor default may not be correct. */
#if TARGET_CPU_DEFAULT == TARGET_CPU_v850e
#undef MASK_DEFAULT
#define MASK_DEFAULT MASK_V850E
#undef SUBTARGET_ASM_SPEC
#define SUBTARGET_ASM_SPEC "%{!mv*:-mv850e}"
#undef SUBTARGET_CPP_SPEC
#define SUBTARGET_CPP_SPEC "%{!mv*:-D__v850e__}"
#undef TARGET_VERSION
#define TARGET_VERSION fprintf (stderr, " (NEC V850E)");
#endif
#define ASM_SPEC "%{mv*:-mv%*}" #define ASM_SPEC "%{mv*:-mv%*}"
#define CPP_SPEC "%{mv850ea:-D__v850ea__} %{mv850e:-D__v850e__} %{mv850:-D__v850__} %(subtarget_cpp_spec)" #define CPP_SPEC "%{mv850e:-D__v850e__} %{mv850:-D__v850__} %(subtarget_cpp_spec)"
#define EXTRA_SPECS \ #define EXTRA_SPECS \
{ "subtarget_asm_spec", SUBTARGET_ASM_SPEC }, \ { "subtarget_asm_spec", SUBTARGET_ASM_SPEC }, \
...@@ -67,8 +80,15 @@ extern int target_flags; ...@@ -67,8 +80,15 @@ extern int target_flags;
#define MASK_CPU 0x00000030 #define MASK_CPU 0x00000030
#define MASK_V850 0x00000010 #define MASK_V850 0x00000010
#define MASK_V850E 0x00000020
#define MASK_SMALL_SLD 0x00000040
#define MASK_BIG_SWITCH 0x00000100 #define MASK_BIG_SWITCH 0x00000100
#define MASK_NO_APP_REGS 0x00000200
#define MASK_DISABLE_CALLT 0x00000400
#define MASK_US_BIT_SET 0x00001000
#define MASK_US_MASK_SET 0x00002000
/* Macros used in the machine description to test the flags. */ /* Macros used in the machine description to test the flags. */
...@@ -107,8 +127,23 @@ extern int target_flags; ...@@ -107,8 +127,23 @@ extern int target_flags;
/* Whether to emit 2 byte per entry or 4 byte per entry switch tables. */ /* Whether to emit 2 byte per entry or 4 byte per entry switch tables. */
#define TARGET_BIG_SWITCH (target_flags & MASK_BIG_SWITCH) #define TARGET_BIG_SWITCH (target_flags & MASK_BIG_SWITCH)
/* General debug flag */ /* General debug flag. */
#define TARGET_DEBUG (target_flags & MASK_DEBUG) #define TARGET_DEBUG (target_flags & MASK_DEBUG)
#define TARGET_V850E ((target_flags & MASK_V850E) == MASK_V850E)
#define TARGET_US_BIT_SET (target_flags & MASK_US_BIT_SET)
/* Whether to assume that the SLD.B and SLD.H instructions only have small
displacement fields, thus allowing the generated code to run on any of
the V850 range of processors. */
#define TARGET_SMALL_SLD (target_flags & MASK_SMALL_SLD)
/* True if callt will not be used for function prolog & epilog. */
#define TARGET_DISABLE_CALLT (target_flags & MASK_DISABLE_CALLT)
/* False if r2 and r5 can be used by the compiler. True if r2
and r5 are to be fixed registers (for compatibility with GHS). */
#define TARGET_NO_APP_REGS (target_flags & MASK_NO_APP_REGS)
/* Macro to define tables used to set the flags. /* Macro to define tables used to set the flags.
This is a list in braces of pairs in braces, This is a list in braces of pairs in braces,
...@@ -134,6 +169,19 @@ extern int target_flags; ...@@ -134,6 +169,19 @@ extern int target_flags;
{ "v850", MASK_V850, \ { "v850", MASK_V850, \
N_("Compile for the v850 processor") }, \ N_("Compile for the v850 processor") }, \
{ "v850", -(MASK_V850 ^ MASK_CPU), "" }, \ { "v850", -(MASK_V850 ^ MASK_CPU), "" }, \
{ "v850e", MASK_V850E, N_("Compile for v850e processor") }, \
{ "v850e", -(MASK_V850E ^ MASK_CPU), "" }, /* Make sure that the other bits are cleared. */ \
{ "small-sld", MASK_SMALL_SLD, N_("Enable the use of the short load instructions") }, \
{ "no-small-sld", -MASK_SMALL_SLD, "" }, \
{ "disable-callt", MASK_DISABLE_CALLT, \
N_("Do not use the callt instruction") }, \
{ "no-disable-callt", -MASK_DISABLE_CALLT, "" }, \
{ "US-bit-set", (MASK_US_BIT_SET | MASK_US_MASK_SET), "" }, \
{ "no-US-bit-set", -MASK_US_BIT_SET, "" }, \
{ "no-US-bit-set", MASK_US_MASK_SET, "" }, \
{ "app-regs", -MASK_NO_APP_REGS, "" }, \
{ "no-app-regs", MASK_NO_APP_REGS, \
N_("Do not use registers r2 and r5") }, \
{ "big-switch", MASK_BIG_SWITCH, \ { "big-switch", MASK_BIG_SWITCH, \
N_("Use 4 byte entries in switch tables") },\ N_("Use 4 byte entries in switch tables") },\
{ "", MASK_DEFAULT, ""}} { "", MASK_DEFAULT, ""}}
...@@ -327,6 +375,17 @@ extern struct small_memory_info small_memory[(int)SMALL_MEMORY_max]; ...@@ -327,6 +375,17 @@ extern struct small_memory_info small_memory[(int)SMALL_MEMORY_max];
0, 1, 3, 4, 5, 30, 32, 33 /* fixed registers */ \ 0, 1, 3, 4, 5, 30, 32, 33 /* fixed registers */ \
} }
/* If TARGET_NO_APP_REGS is not defined then add r2 and r5 to
the pool of fixed registers. See PR 14505. */
#define CONDITIONAL_REGISTER_USAGE \
{ \
if (TARGET_NO_APP_REGS) \
{ \
fixed_regs[2] = 1; call_used_regs[2] = 1; \
fixed_regs[5] = 1; call_used_regs[5] = 1; \
} \
}
/* Return number of consecutive hard regs needed starting at reg REGNO /* Return number of consecutive hard regs needed starting at reg REGNO
to hold something of mode MODE. to hold something of mode MODE.
...@@ -457,11 +516,11 @@ enum reg_class ...@@ -457,11 +516,11 @@ enum reg_class
#define CONST_OK_FOR_M(VALUE) ((unsigned)(VALUE) < 0x10000) #define CONST_OK_FOR_M(VALUE) ((unsigned)(VALUE) < 0x10000)
/* 5 bit unsigned immediate in shift instructions */ /* 5 bit unsigned immediate in shift instructions */
#define CONST_OK_FOR_N(VALUE) ((unsigned) (VALUE) <= 31) #define CONST_OK_FOR_N(VALUE) ((unsigned) (VALUE) <= 31)
/* 9 bit signed immediate for word multiply instruction. */
#define CONST_OK_FOR_O(VALUE) ((unsigned) (VALUE) + 0x100 < 0x200)
#define CONST_OK_FOR_O(VALUE) 0
#define CONST_OK_FOR_P(VALUE) 0 #define CONST_OK_FOR_P(VALUE) 0
#define CONST_OK_FOR_LETTER_P(VALUE, C) \ #define CONST_OK_FOR_LETTER_P(VALUE, C) \
((C) == 'I' ? CONST_OK_FOR_I (VALUE) : \ ((C) == 'I' ? CONST_OK_FOR_I (VALUE) : \
(C) == 'J' ? CONST_OK_FOR_J (VALUE) : \ (C) == 'J' ? CONST_OK_FOR_J (VALUE) : \
...@@ -851,7 +910,7 @@ extern int current_function_anonymous_args; ...@@ -851,7 +910,7 @@ extern int current_function_anonymous_args;
((C) == 'Q' ? ep_memory_operand (OP, GET_MODE (OP), 0) \ ((C) == 'Q' ? ep_memory_operand (OP, GET_MODE (OP), 0) \
: (C) == 'R' ? special_symbolref_operand (OP, VOIDmode) \ : (C) == 'R' ? special_symbolref_operand (OP, VOIDmode) \
: (C) == 'S' ? (GET_CODE (OP) == SYMBOL_REF && ! ZDA_NAME_P (XSTR (OP, 0))) \ : (C) == 'S' ? (GET_CODE (OP) == SYMBOL_REF && ! ZDA_NAME_P (XSTR (OP, 0))) \
: (C) == 'T' ? 0 \ : (C) == 'T' ? ep_memory_operand(OP,GET_MODE(OP),TRUE) \
: (C) == 'U' ? ((GET_CODE (OP) == SYMBOL_REF && ZDA_NAME_P (XSTR (OP, 0))) \ : (C) == 'U' ? ((GET_CODE (OP) == SYMBOL_REF && ZDA_NAME_P (XSTR (OP, 0))) \
|| (GET_CODE (OP) == CONST \ || (GET_CODE (OP) == CONST \
&& GET_CODE (XEXP (OP, 0)) == PLUS \ && GET_CODE (XEXP (OP, 0)) == PLUS \
...@@ -1136,17 +1195,9 @@ zbss_section () \ ...@@ -1136,17 +1195,9 @@ zbss_section () \
#undef USER_LABEL_PREFIX #undef USER_LABEL_PREFIX
#define USER_LABEL_PREFIX "_" #define USER_LABEL_PREFIX "_"
/* When assemble_integer is used to emit the offsets for a switch #define OUTPUT_ADDR_CONST_EXTRA(FILE, X, FAIL) \
table it can encounter (TRUNCATE:HI (MINUS:SI (LABEL_REF:SI) (LABEL_REF:SI))). if (! v850_output_addr_const_extra (FILE, X)) \
output_addr_const will normally barf at this, but it is OK to omit goto FAIL
the truncate and just emit the difference of the two labels. The
.hword directive will automatically handle the truncation for us. */
#define OUTPUT_ADDR_CONST_EXTRA(FILE, X, FAIL) \
if (GET_CODE (x) == TRUNCATE) \
output_addr_const (FILE, XEXP (X, 0)); \
else \
goto FAIL;
/* This says how to output the assembler to define a global /* This says how to output the assembler to define a global
uninitialized but not common symbol. */ uninitialized but not common symbol. */
...@@ -1243,10 +1294,12 @@ zbss_section () \ ...@@ -1243,10 +1294,12 @@ zbss_section () \
/* This is how to output an element of a case-vector that is relative. */ /* This is how to output an element of a case-vector that is relative. */
#define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \ #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \
fprintf (FILE, "\t%s .L%d-.L%d\n", \ fprintf (FILE, "\t%s %s.L%d-.L%d%s\n", \
(TARGET_BIG_SWITCH ? ".long" : ".short"), \ (TARGET_BIG_SWITCH ? ".long" : ".short"), \
VALUE, REL) (! TARGET_BIG_SWITCH && TARGET_V850E ? "(" : ""), \
VALUE, REL, \
(! TARGET_BIG_SWITCH && TARGET_V850E ? ")>>1" : ""))
#define ASM_OUTPUT_ALIGN(FILE, LOG) \ #define ASM_OUTPUT_ALIGN(FILE, LOG) \
if ((LOG) != 0) \ if ((LOG) != 0) \
...@@ -1426,6 +1479,9 @@ extern union tree_node * GHS_current_section_names [(int) COUNT_OF_GHS_SECTION_K ...@@ -1426,6 +1479,9 @@ extern union tree_node * GHS_current_section_names [(int) COUNT_OF_GHS_SECTION_K
{ "pattern_is_ok_for_prologue", { PARALLEL }}, \ { "pattern_is_ok_for_prologue", { PARALLEL }}, \
{ "pattern_is_ok_for_epilogue", { PARALLEL }}, \ { "pattern_is_ok_for_epilogue", { PARALLEL }}, \
{ "register_is_ok_for_epilogue",{ REG }}, \ { "register_is_ok_for_epilogue",{ REG }}, \
{ "pattern_is_ok_for_dispose", { PARALLEL }}, \
{ "pattern_is_ok_for_prepare", { PARALLEL }}, \
{ "register_is_ok_for_dispose", { REG }}, \
{ "not_power_of_two_operand", { CONST_INT }}, { "not_power_of_two_operand", { CONST_INT }},
#endif /* ! GCC_V850_H */ #endif /* ! GCC_V850_H */
gcc/config/v850/v850.md
;; GCC machine description for NEC V850 ;; GCC machine description for NEC V850
;; Copyright (C) 1996, 1997, 1998, 1999 Free Software Foundation, Inc. ;; Copyright (C) 1996, 1997, 1998, 1999, 2002 Free Software Foundation, Inc.
;; Contributed by Jeff Law (law@cygnus.com). ;; Contributed by Jeff Law (law@cygnus.com).
;; This file is part of GNU CC. ;; This file is part of GNU CC.
...@@ -153,6 +153,7 @@ ...@@ -153,6 +153,7 @@
must be done with HIGH & LO_SUM patterns. */ must be done with HIGH & LO_SUM patterns. */
if (CONSTANT_P (operands[1]) if (CONSTANT_P (operands[1])
&& GET_CODE (operands[1]) != HIGH && GET_CODE (operands[1]) != HIGH
&& ! TARGET_V850E
&& !special_symbolref_operand (operands[1], VOIDmode) && !special_symbolref_operand (operands[1], VOIDmode)
&& !(GET_CODE (operands[1]) == CONST_INT && !(GET_CODE (operands[1]) == CONST_INT
&& (CONST_OK_FOR_J (INTVAL (operands[1])) && (CONST_OK_FOR_J (INTVAL (operands[1]))
...@@ -174,6 +175,24 @@ ...@@ -174,6 +175,24 @@
} }
}") }")
;; This is the same as the following pattern, except that it includes
;; support for arbitrary 32 bit immediates.
;; ??? This always loads addresses using hilo. If the only use of this address
;; was in a load/store, then we would get smaller code if we only loaded the
;; upper part with hi, and then put the lower part in the load/store insn.
(define_insn "*movsi_internal_v850e"
[(set (match_operand:SI 0 "general_operand" "=r,r,r,r,Q,r,r,m,m,r")
(match_operand:SI 1 "general_operand" "Jr,K,L,Q,Ir,m,R,r,I,i"))]
"TARGET_V850E
&& (register_operand (operands[0], SImode)
|| reg_or_0_operand (operands[1], SImode))"
"* return output_move_single (operands);"
[(set_attr "length" "2,4,4,2,2,4,4,4,4,6")
(set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
(set_attr "type" "other,other,other,load,other,load,other,other,other,other")])
(define_insn "*movsi_internal" (define_insn "*movsi_internal"
[(set (match_operand:SI 0 "general_operand" "=r,r,r,r,Q,r,r,m,m") [(set (match_operand:SI 0 "general_operand" "=r,r,r,r,Q,r,r,m,m")
(match_operand:SI 1 "movsi_source_operand" "Jr,K,L,Q,Ir,m,R,r,I"))] (match_operand:SI 1 "movsi_source_operand" "Jr,K,L,Q,Ir,m,R,r,I"))]
...@@ -377,6 +396,94 @@ ...@@ -377,6 +396,94 @@
(set_attr "cc" "none_0hit,none_0hit") (set_attr "cc" "none_0hit,none_0hit")
(set_attr "type" "mult")]) (set_attr "type" "mult")])
;; ??? The scheduling info is probably wrong.
;; ??? This instruction can also generate the 32 bit highpart, but using it
;; may increase code size counter to the desired result.
;; ??? This instructions can also give a DImode result.
;; ??? There is unsigned version, but it matters only for the DImode/highpart
;; results.
(define_insn "mulsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(mult:SI (match_operand:SI 1 "register_operand" "%0")
;; %redact changeone /reg_or_int9/ 'register' unless nec-no-copyright
(match_operand:SI 2 "reg_or_int9_operand" "rO")))]
"TARGET_V850E"
"mul %2,%1,%."
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "mult")])
;; ----------------------------------------------------------------------
;; DIVIDE INSTRUCTIONS
;; ----------------------------------------------------------------------
;; ??? These insns do set the Z/N condition codes, except that they are based
;; on only one of the two results, so it doesn't seem to make sense to use
;; them.
;; ??? The scheduling info is probably wrong.
(define_insn "divmodsi4"
[(set (match_operand:SI 0 "register_operand" "=r")
(div:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "register_operand" "r")))
(set (match_operand:SI 3 "register_operand" "=r")
(mod:SI (match_dup 1)
(match_dup 2)))]
"TARGET_V850E"
"div %2,%0,%3"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "other")])
(define_insn "udivmodsi4"
[(set (match_operand:SI 0 "register_operand" "=r")
(udiv:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "register_operand" "r")))
(set (match_operand:SI 3 "register_operand" "=r")
(umod:SI (match_dup 1)
(match_dup 2)))]
"TARGET_V850E"
"divu %2,%0,%3"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "other")])
;; ??? There is a 2 byte instruction for generating only the quotient.
;; However, it isn't clear how to compute the length field correctly.
(define_insn "divmodhi4"
[(set (match_operand:HI 0 "register_operand" "=r")
(div:HI (match_operand:HI 1 "register_operand" "0")
(match_operand:HI 2 "register_operand" "r")))
(set (match_operand:HI 3 "register_operand" "=r")
(mod:HI (match_dup 1)
(match_dup 2)))]
"TARGET_V850E"
"divh %2,%0,%3"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "other")])
;; Half-words are sign-extended by default, so we must zero extend to a word
;; here before doing the divide.
(define_insn "udivmodhi4"
[(set (match_operand:HI 0 "register_operand" "=r")
(udiv:HI (match_operand:HI 1 "register_operand" "0")
(match_operand:HI 2 "register_operand" "r")))
(set (match_operand:HI 3 "register_operand" "=r")
(umod:HI (match_dup 1)
(match_dup 2)))]
"TARGET_V850E"
"zxh %0 ; divhu %2,%0,%3"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "other")])
;; ---------------------------------------------------------------------- ;; ----------------------------------------------------------------------
;; AND INSTRUCTIONS ;; AND INSTRUCTIONS
...@@ -734,6 +841,245 @@ ...@@ -734,6 +841,245 @@
[(set_attr "length" "4") [(set_attr "length" "4")
(set_attr "cc" "none_0hit")]) (set_attr "cc" "none_0hit")])
;; ----------------------------------------------------------------------
;; CONDITIONAL MOVE INSTRUCTIONS
;; ----------------------------------------------------------------------
;; Instructions using cc0 aren't allowed to have input reloads, so we must
;; hide the fact that this instruction uses cc0. We do so by including the
;; compare instruction inside it.
;; ??? This is very ugly. The right way to do this is to modify cmpsi so
;; that it doesn't emit RTL, and then modify the bcc/scc patterns so that
;; they emit RTL for the compare instruction. Unfortunately, this requires
;; lots of changes that will be hard to sanitise. So for now, cmpsi still
;; emits RTL, and I get the compare operands here from the previous insn.
(define_expand "movsicc"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(match_dup 4) (match_dup 5)])
;; %redact changeone /const/ 'int5' unless nec-no-copyright
(match_operand:SI 2 "reg_or_const_operand" "rJ")
;; %redact changeone /const/ '0' unless nec-no-copyright
(match_operand:SI 3 "reg_or_const_operand" "rI")))]
"TARGET_V850E"
"
{
rtx insn = get_last_insn_anywhere ();
if ( (GET_CODE (operands[2]) == CONST_INT
&& GET_CODE (operands[3]) == CONST_INT))
{
int o2 = INTVAL (operands[2]);
int o3 = INTVAL (operands[3]);
if (o2 == 1 && o3 == 0)
FAIL; /* setf */
if (o3 == 1 && o2 == 0)
FAIL; /* setf */
if (o2 == 0 && (o3 < -16 || o3 > 15) && exact_log2 (o3) >= 0)
FAIL; /* setf + shift */
if (o3 == 0 && (o2 < -16 || o2 > 15) && exact_log2 (o2) >=0)
FAIL; /* setf + shift */
if (o2 != 0)
operands[2] = copy_to_mode_reg (SImode, operands[2]);
if (o3 !=0 )
operands[3] = copy_to_mode_reg (SImode, operands[3]);
}
else
{
if (GET_CODE (operands[2]) != REG)
operands[2] = copy_to_mode_reg (SImode,operands[2]);
if (GET_CODE (operands[3]) != REG)
operands[3] = copy_to_mode_reg (SImode, operands[3]);
}
if (GET_CODE (insn) == INSN
&& GET_CODE (PATTERN (insn)) == SET
&& SET_DEST (PATTERN (insn)) == cc0_rtx)
{
rtx src = SET_SRC (PATTERN (insn));
if (GET_CODE (src) == COMPARE)
{
operands[4] = XEXP (src, 0);
operands[5] = XEXP (src, 1);
}
else if (GET_CODE (src) == REG
|| GET_CODE (src) == SUBREG)
{
operands[4] = src;
operands[5] = const0_rtx;
}
else
abort ();
}
else
abort ();
}")
;; ??? Clobbering the condition codes is overkill.
;; ??? We sometimes emit an unnecessary compare instruction because the
;; condition codes may have already been set by an earlier instruction,
;; but we have no code here to avoid the compare if it is unnecessary.
(define_insn "*movsicc_normal"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(match_operand:SI 4 "register_operand" "r")
(match_operand:SI 5 "reg_or_int5_operand" "rJ")])
(match_operand:SI 2 "reg_or_int5_operand" "rJ")
(match_operand:SI 3 "reg_or_0_operand" "rI")))]
"TARGET_V850E"
"cmp %5,%4 ; cmov %c1,%2,%z3,%0"
[(set_attr "length" "6")
(set_attr "cc" "clobber")])
(define_insn "*movsicc_reversed"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(match_operand:SI 4 "register_operand" "r")
(match_operand:SI 5 "reg_or_int5_operand" "rJ")])
(match_operand:SI 2 "reg_or_0_operand" "rI")
(match_operand:SI 3 "reg_or_int5_operand" "rJ")))]
"TARGET_V850E"
"cmp %5,%4 ; cmov %C1,%3,%z2,%0"
[(set_attr "length" "6")
(set_attr "cc" "clobber")])
(define_insn "*movsicc_tst1"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(zero_extract:SI
(match_operand:QI 2 "memory_operand" "m")
(const_int 1)
(match_operand 3 "const_int_operand" "n"))
(const_int 0)])
(match_operand:SI 4 "reg_or_int5_operand" "rJ")
(match_operand:SI 5 "reg_or_0_operand" "rI")))]
"TARGET_V850E"
"tst1 %3,%2 ; cmov %c1,%4,%z5,%0"
[(set_attr "length" "8")
(set_attr "cc" "clobber")])
(define_insn "*movsicc_tst1_reversed"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(zero_extract:SI
(match_operand:QI 2 "memory_operand" "m")
(const_int 1)
(match_operand 3 "const_int_operand" "n"))
(const_int 0)])
(match_operand:SI 4 "reg_or_0_operand" "rI")
(match_operand:SI 5 "reg_or_int5_operand" "rJ")))]
"TARGET_V850E"
"tst1 %3,%2 ; cmov %C1,%5,%z4,%0"
[(set_attr "length" "8")
(set_attr "cc" "clobber")])
;; Matching for sasf requires combining 4 instructions, so we provide a
;; dummy pattern to match the first 3, which will always be turned into the
;; second pattern by subsequent combining. As above, we must include the
;; comparison to avoid input reloads in an insn using cc0.
(define_insn "*sasf_1"
[(set (match_operand:SI 0 "register_operand" "")
(ior:SI (match_operator 1 "comparison_operator" [(cc0) (const_int 0)])
(ashift:SI (match_operand:SI 2 "register_operand" "")
(const_int 1))))]
"TARGET_V850E"
"* abort ();")
(define_insn "*sasf_2"
[(set (match_operand:SI 0 "register_operand" "=r")
(ior:SI
(match_operator 1 "comparison_operator"
[(match_operand:SI 3 "register_operand" "r")
(match_operand:SI 4 "reg_or_int5_operand" "rJ")])
(ashift:SI (match_operand:SI 2 "register_operand" "0")
(const_int 1))))]
"TARGET_V850E"
"cmp %4,%3 ; sasf %c1,%0"
[(set_attr "length" "6")
(set_attr "cc" "clobber")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(match_operand:SI 4 "register_operand" "")
(match_operand:SI 5 "reg_or_int5_operand" "")])
(match_operand:SI 2 "const_int_operand" "")
(match_operand:SI 3 "const_int_operand" "")))]
"TARGET_V850E
&& ((INTVAL (operands[2]) ^ INTVAL (operands[3])) == 1)
&& ((INTVAL (operands[2]) + INTVAL (operands[3])) != 1)
&& (GET_CODE (operands[5]) == CONST_INT
|| REGNO (operands[0]) != REGNO (operands[5]))
&& REGNO (operands[0]) != REGNO (operands[4])"
[(set (match_dup 0) (match_dup 6))
(set (match_dup 0)
(ior:SI (match_op_dup 7 [(match_dup 4) (match_dup 5)])
(ashift:SI (match_dup 0) (const_int 1))))]
"
{
operands[6] = GEN_INT (INTVAL (operands[2]) >> 1);
if (INTVAL (operands[2]) & 0x1)
operands[7] = operands[1];
else
operands[7] = gen_rtx (reverse_condition (GET_CODE (operands[1])),
GET_MODE (operands[1]), XEXP (operands[1], 0),
XEXP (operands[1], 1));
}")
;; ---------------------------------------------------------------------
;; BYTE SWAP INSTRUCTIONS
;; ---------------------------------------------------------------------
(define_expand "rotlhi3"
[(set (match_operand:HI 0 "register_operand" "")
(rotate:HI (match_operand:HI 1 "register_operand" "")
(match_operand:HI 2 "const_int_operand" "")))]
"TARGET_V850E"
"
{
if (INTVAL (operands[2]) != 8)
FAIL;
}")
(define_insn "*rotlhi3_8"
[(set (match_operand:HI 0 "register_operand" "=r")
(rotate:HI (match_operand:HI 1 "register_operand" "r")
(const_int 8)))]
"TARGET_V850E"
"bsh %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_expand "rotlsi3"
[(set (match_operand:SI 0 "register_operand" "")
(rotate:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "const_int_operand" "")))]
"TARGET_V850E"
"
{
if (INTVAL (operands[2]) != 16)
FAIL;
}")
(define_insn "*rotlsi3_16"
[(set (match_operand:SI 0 "register_operand" "=r")
(rotate:SI (match_operand:SI 1 "register_operand" "r")
(const_int 16)))]
"TARGET_V850E"
"hsw %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
;; ---------------------------------------------------------------------- ;; ----------------------------------------------------------------------
;; JUMP INSTRUCTIONS ;; JUMP INSTRUCTIONS
...@@ -921,6 +1267,20 @@ ...@@ -921,6 +1267,20 @@
[(set_attr "length" "2") [(set_attr "length" "2")
(set_attr "cc" "none")]) (set_attr "cc" "none")])
(define_insn "switch"
[(set (pc)
(plus:SI
(sign_extend:SI
(mem:HI
(plus:SI (ashift:SI (match_operand:SI 0 "register_operand" "r")
(const_int 1))
(label_ref (match_operand 1 "" "")))))
(label_ref (match_dup 1))))]
"TARGET_V850E"
"switch %0"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_expand "casesi" (define_expand "casesi"
[(match_operand:SI 0 "register_operand" "") [(match_operand:SI 0 "register_operand" "")
(match_operand:SI 1 "register_operand" "") (match_operand:SI 1 "register_operand" "")
...@@ -940,6 +1300,12 @@ ...@@ -940,6 +1300,12 @@
/* Branch to the default label if out of range of the table. */ /* Branch to the default label if out of range of the table. */
emit_jump_insn (gen_bgtu (operands[4])); emit_jump_insn (gen_bgtu (operands[4]));
if (! TARGET_BIG_SWITCH && TARGET_V850E)
{
emit_jump_insn (gen_switch (reg, operands[3]));
DONE;
}
/* Shift index for the table array access. */ /* Shift index for the table array access. */
emit_insn (gen_ashlsi3 (reg, reg, GEN_INT (TARGET_BIG_SWITCH ? 2 : 1))); emit_insn (gen_ashlsi3 (reg, reg, GEN_INT (TARGET_BIG_SWITCH ? 2 : 1)));
/* Load the table address into a pseudo. */ /* Load the table address into a pseudo. */
...@@ -1084,6 +1450,18 @@ ...@@ -1084,6 +1450,18 @@
;; EXTEND INSTRUCTIONS ;; EXTEND INSTRUCTIONS
;; ---------------------------------------------------------------------- ;; ----------------------------------------------------------------------
(define_insn ""
[(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
(zero_extend:SI
(match_operand:HI 1 "nonimmediate_operand" "0,r,T,m")))]
"TARGET_V850E"
"@
zxh %0
andi 65535,%1,%0
sld.hu %1,%0
ld.hu %1,%0"
[(set_attr "length" "2,4,2,4")
(set_attr "cc" "none_0hit,set_znv,none_0hit,none_0hit")])
(define_insn "zero_extendhisi2" (define_insn "zero_extendhisi2"
[(set (match_operand:SI 0 "register_operand" "=r") [(set (match_operand:SI 0 "register_operand" "=r")
...@@ -1094,6 +1472,18 @@ ...@@ -1094,6 +1472,18 @@
[(set_attr "length" "4") [(set_attr "length" "4")
(set_attr "cc" "set_znv")]) (set_attr "cc" "set_znv")])
(define_insn ""
[(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
(zero_extend:SI
(match_operand:QI 1 "nonimmediate_operand" "0,r,T,m")))]
"TARGET_V850E"
"@
zxb %0
andi 255,%1,%0
sld.bu %1,%0
ld.bu %1,%0"
[(set_attr "length" "2,4,2,4")
(set_attr "cc" "none_0hit,set_znv,none_0hit,none_0hit")])
(define_insn "zero_extendqisi2" (define_insn "zero_extendqisi2"
[(set (match_operand:SI 0 "register_operand" "=r") [(set (match_operand:SI 0 "register_operand" "=r")
...@@ -1106,6 +1496,18 @@ ...@@ -1106,6 +1496,18 @@
;;- sign extension instructions ;;- sign extension instructions
;; ??? The extendhisi2 pattern should not emit shifts for v850e?
(define_insn "*extendhisi_insn"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(sign_extend:SI (match_operand:HI 1 "nonimmediate_operand" "0,Q,m")))]
"TARGET_V850E"
"@
sxh %0
sld.h %1,%0
ld.h %1,%0"
[(set_attr "length" "2,2,4")
(set_attr "cc" "none_0hit,none_0hit,none_0hit")])
;; ??? This is missing a sign extend from memory pattern to match the ld.h ;; ??? This is missing a sign extend from memory pattern to match the ld.h
;; instruction. ;; instruction.
...@@ -1124,6 +1526,18 @@ ...@@ -1124,6 +1526,18 @@
operands[2] = gen_reg_rtx (SImode); operands[2] = gen_reg_rtx (SImode);
}") }")
;; ??? The extendqisi2 pattern should not emit shifts for v850e?
(define_insn "*extendqisi_insn"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(sign_extend:SI (match_operand:QI 1 "nonimmediate_operand" "0,Q,m")))]
"TARGET_V850E"
"@
sxb %0
sld.b %1,%0
ld.b %1,%0"
[(set_attr "length" "2,2,4")
(set_attr "cc" "none_0hit,none_0hit,none_0hit")])
;; ??? This is missing a sign extend from memory pattern to match the ld.b ;; ??? This is missing a sign extend from memory pattern to match the ld.b
;; instruction. ;; instruction.
...@@ -1229,6 +1643,21 @@ ...@@ -1229,6 +1643,21 @@
;; RTXs. These RTXs will then be turned into a suitable call to a worker ;; RTXs. These RTXs will then be turned into a suitable call to a worker
;; function. ;; function.
;;
;; Actually, convert the RTXs into a PREPARE instruction.
;;
(define_insn ""
[(match_parallel 0 "pattern_is_ok_for_prepare"
[(set (reg:SI 3)
(plus:SI (reg:SI 3) (match_operand:SI 1 "immediate_operand" "i")))
(set (mem:SI (plus:SI (reg:SI 3)
(match_operand:SI 2 "immediate_operand" "i")))
(match_operand:SI 3 "register_is_ok_for_epilogue" "r"))])]
"TARGET_PROLOG_FUNCTION && TARGET_V850E"
"* return construct_prepare_instruction (operands[0]);
"
[(set_attr "length" "4")
(set_attr "cc" "none")])
(define_insn "" (define_insn ""
[(match_parallel 0 "pattern_is_ok_for_prologue" [(match_parallel 0 "pattern_is_ok_for_prologue"
...@@ -1245,6 +1674,23 @@ ...@@ -1245,6 +1674,23 @@
(const_string "4"))) (const_string "4")))
(set_attr "cc" "clobber")]) (set_attr "cc" "clobber")])
;;
;; Actually, turn the RTXs into a DISPOSE instruction.
;;
(define_insn ""
[(match_parallel 0 "pattern_is_ok_for_dispose"
[(return)
(set (reg:SI 3)
(plus:SI (reg:SI 3) (match_operand:SI 1 "immediate_operand" "i")))
(set (match_operand:SI 2 "register_is_ok_for_epilogue" "=r")
(mem:SI (plus:SI (reg:SI 3)
(match_operand:SI 3 "immediate_operand" "i"))))])]
"TARGET_PROLOG_FUNCTION && TARGET_V850E"
"* return construct_dispose_instruction (operands[0]);
"
[(set_attr "length" "4")
(set_attr "cc" "none")])
;; This pattern will match a return RTX followed by any number of pop RTXs ;; This pattern will match a return RTX followed by any number of pop RTXs
;; and possible a stack adjustment as well. These RTXs will be turned into ;; and possible a stack adjustment as well. These RTXs will be turned into
;; a suitable call to a worker function. ;; a suitable call to a worker function.
...@@ -1266,31 +1712,95 @@ ...@@ -1266,31 +1712,95 @@
(set_attr "cc" "clobber")]) (set_attr "cc" "clobber")])
;; Initialize an interrupt function. Do not depend on TARGET_PROLOG_FUNCTION. ;; Initialize an interrupt function. Do not depend on TARGET_PROLOG_FUNCTION.
(define_insn "callt_save_interrupt"
[(unspec_volatile [(const_int 0)] 2)]
"TARGET_V850E && !TARGET_DISABLE_CALLT"
;; The CALLT instruction stores the next address of CALLT to CTPC register
;; without saving its previous value. So if the interrupt handler
;; or its caller could possibily execute the CALLT insn, save_interrupt
;; MUST NOT be called via CALLT.
"*
{
output_asm_insn (\"addi -24, sp, sp\", operands);
output_asm_insn (\"st.w r10, 12[sp]\", operands);
output_asm_insn (\"stsr ctpc, r10\", operands);
output_asm_insn (\"st.w r10, 16[sp]\", operands);
output_asm_insn (\"stsr ctpsw, r10\", operands);
output_asm_insn (\"st.w r10, 20[sp]\", operands);
output_asm_insn (\"callt ctoff(__callt_save_interrupt)\", operands);
return \"\";
}"
[(set_attr "length" "26")
(set_attr "cc" "none")])
(define_insn "callt_return_interrupt"
[(unspec_volatile [(const_int 0)] 3)]
"TARGET_V850E && !TARGET_DISABLE_CALLT"
"callt ctoff(__callt_return_interrupt)"
[(set_attr "length" "2")
(set_attr "cc" "clobber")])
(define_insn "save_interrupt" (define_insn "save_interrupt"
[(set (reg:SI 3) (plus:SI (reg:SI 3) (const_int -16))) [(set (reg:SI 3) (plus:SI (reg:SI 3) (const_int -16)))
(set (mem:SI (reg:SI 3)) (reg:SI 30)) (set (mem:SI (plus:SI (reg:SI 3) (const_int -16))) (reg:SI 30))
(set (mem:SI (plus:SI (reg:SI 3) (const_int -4))) (reg:SI 10)) (set (mem:SI (plus:SI (reg:SI 3) (const_int -12))) (reg:SI 4))
(set (mem:SI (plus:SI (reg:SI 3) (const_int -8))) (reg:SI 4)) (set (mem:SI (plus:SI (reg:SI 3) (const_int -8))) (reg:SI 1))
(set (mem:SI (plus:SI (reg:SI 3) (const_int -12))) (reg:SI 1))] (set (mem:SI (plus:SI (reg:SI 3) (const_int -4))) (reg:SI 10))]
"TARGET_V850 && ! TARGET_LONG_CALLS" ""
"add -16, sp ; st.w r10, 12[sp] ; jarl __save_interrupt, r10" "*
[(set_attr "length" "12") {
if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
return \"add -16,sp\;st.w r10,12[sp]\;jarl __save_interrupt,r10\";
else
{
output_asm_insn (\"add -16, sp\", operands);
output_asm_insn (\"st.w r10, 12[sp]\", operands);
output_asm_insn (\"st.w ep, 0[sp]\", operands);
output_asm_insn (\"st.w gp, 4[sp]\", operands);
output_asm_insn (\"st.w r1, 8[sp]\", operands);
output_asm_insn (\"movhi hi(__ep), r0, ep\", operands);
output_asm_insn (\"movea lo(__ep), ep, ep\", operands);
output_asm_insn (\"movhi hi(__gp), r0, gp\", operands);
output_asm_insn (\"movea lo(__gp), gp, gp\", operands);
return \"\";
}
}"
[(set (attr "length")
(if_then_else (ne (symbol_ref "TARGET_LONG_CALLS") (const_int 0))
(const_int 10)
(const_int 34)))
(set_attr "cc" "clobber")]) (set_attr "cc" "clobber")])
;; Restore r1, r4, r10, and return from the interrupt ;; Restore r1, r4, r10, and return from the interrupt
(define_insn "restore_interrupt" (define_insn "return_interrupt"
[(return) [(return)
(set (reg:SI 3) (plus:SI (reg:SI 3) (const_int 16))) (set (reg:SI 3) (plus:SI (reg:SI 3) (const_int 16)))
(set (reg:SI 30) (mem:SI (plus:SI (reg:SI 3) (const_int 12)))) (set (reg:SI 10) (mem:SI (plus:SI (reg:SI 3) (const_int 12))))
(set (reg:SI 10) (mem:SI (plus:SI (reg:SI 3) (const_int 8)))) (set (reg:SI 1) (mem:SI (plus:SI (reg:SI 3) (const_int 8))))
(set (reg:SI 4) (mem:SI (plus:SI (reg:SI 3) (const_int 4)))) (set (reg:SI 4) (mem:SI (plus:SI (reg:SI 3) (const_int 4))))
(set (reg:SI 1) (mem:SI (reg:SI 3)))] (set (reg:SI 30) (mem:SI (reg:SI 3)))]
"" ""
"jr __return_interrupt" "*
[(set_attr "length" "4") {
if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
return \"jr __return_interrupt\";
else
{
output_asm_insn (\"ld.w 0[sp], ep\", operands);
output_asm_insn (\"ld.w 4[sp], gp\", operands);
output_asm_insn (\"ld.w 8[sp], r1\", operands);
output_asm_insn (\"ld.w 12[sp], r10\", operands);
output_asm_insn (\"addi 16, sp, sp\", operands);
output_asm_insn (\"reti\", operands);
return \"\";
}
}"
[(set (attr "length")
(if_then_else (ne (symbol_ref "TARGET_LONG_CALLS") (const_int 0))
(const_int 4)
(const_int 24)))
(set_attr "cc" "clobber")]) (set_attr "cc" "clobber")])
;; Save all registers except for the registers saved in save_interrupt when ;; Save all registers except for the registers saved in save_interrupt when
;; an interrupt function makes a call. ;; an interrupt function makes a call.
;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and ;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and
...@@ -1298,28 +1808,148 @@ ...@@ -1298,28 +1808,148 @@
;; This is needed because the rest of the compiler is not ready to handle ;; This is needed because the rest of the compiler is not ready to handle
;; insns this complicated. ;; insns this complicated.
(define_insn "callt_save_all_interrupt"
[(unspec_volatile [(const_int 0)] 0)]
"TARGET_V850E && !TARGET_DISABLE_CALLT"
"callt ctoff(__callt_save_all_interrupt)"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_insn "save_all_interrupt" (define_insn "save_all_interrupt"
[(unspec_volatile [(const_int 0)] 0)] [(unspec_volatile [(const_int 0)] 0)]
""
"*
{
if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
return \"jarl __save_all_interrupt,r10\";
output_asm_insn (\"addi -120, sp, sp\", operands);
output_asm_insn (\"mov ep, r1\", operands);
output_asm_insn (\"mov sp, ep\", operands);
output_asm_insn (\"sst.w r31, 116[ep]\", operands);
output_asm_insn (\"sst.w r2, 112[ep]\", operands);
output_asm_insn (\"sst.w gp, 108[ep]\", operands);
output_asm_insn (\"sst.w r6, 104[ep]\", operands);
output_asm_insn (\"sst.w r7, 100[ep]\", operands);
output_asm_insn (\"sst.w r8, 96[ep]\", operands);
output_asm_insn (\"sst.w r9, 92[ep]\", operands);
output_asm_insn (\"sst.w r11, 88[ep]\", operands);
output_asm_insn (\"sst.w r12, 84[ep]\", operands);
output_asm_insn (\"sst.w r13, 80[ep]\", operands);
output_asm_insn (\"sst.w r14, 76[ep]\", operands);
output_asm_insn (\"sst.w r15, 72[ep]\", operands);
output_asm_insn (\"sst.w r16, 68[ep]\", operands);
output_asm_insn (\"sst.w r17, 64[ep]\", operands);
output_asm_insn (\"sst.w r18, 60[ep]\", operands);
output_asm_insn (\"sst.w r19, 56[ep]\", operands);
output_asm_insn (\"sst.w r20, 52[ep]\", operands);
output_asm_insn (\"sst.w r21, 48[ep]\", operands);
output_asm_insn (\"sst.w r22, 44[ep]\", operands);
output_asm_insn (\"sst.w r23, 40[ep]\", operands);
output_asm_insn (\"sst.w r24, 36[ep]\", operands);
output_asm_insn (\"sst.w r25, 32[ep]\", operands);
output_asm_insn (\"sst.w r26, 28[ep]\", operands);
output_asm_insn (\"sst.w r27, 24[ep]\", operands);
output_asm_insn (\"sst.w r28, 20[ep]\", operands);
output_asm_insn (\"sst.w r29, 16[ep]\", operands);
output_asm_insn (\"mov r1, ep\", operands);
return \"\";
}"
[(set (attr "length")
(if_then_else (ne (symbol_ref "TARGET_LONG_CALLS") (const_int 0))
(const_int 4)
(const_int 62)
))
(set_attr "cc" "clobber")])
(define_insn "_save_all_interrupt"
[(unspec_volatile [(const_int 0)] 0)]
"TARGET_V850 && ! TARGET_LONG_CALLS" "TARGET_V850 && ! TARGET_LONG_CALLS"
"jarl __save_all_interrupt,r10" "jarl __save_all_interrupt,r10"
[(set_attr "length" "4") [(set_attr "length" "4")
(set_attr "cc" "clobber")]) (set_attr "cc" "clobber")])
;; Restore all registers saved when an interrupt function makes a call. ;; Restore all registers saved when an interrupt function makes a call.
;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and ;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and
;; all of memory. This blocks insns from being moved across this point. ;; all of memory. This blocks insns from being moved across this point.
;; This is needed because the rest of the compiler is not ready to handle ;; This is needed because the rest of the compiler is not ready to handle
;; insns this complicated. ;; insns this complicated.
(define_insn "callt_restore_all_interrupt"
[(unspec_volatile [(const_int 0)] 1)]
"TARGET_V850E && !TARGET_DISABLE_CALLT"
"callt ctoff(__callt_restore_all_interrupt)"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_insn "restore_all_interrupt" (define_insn "restore_all_interrupt"
[(unspec_volatile [(const_int 0)] 1)] [(unspec_volatile [(const_int 0)] 1)]
""
"*
{
if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
return \"jarl __restore_all_interrupt,r10\";
else
{
output_asm_insn (\"mov ep, r1\", operands);
output_asm_insn (\"mov sp, ep\", operands);
output_asm_insn (\"sld.w 116[ep], r31\", operands);
output_asm_insn (\"sld.w 112[ep], r2\", operands);
output_asm_insn (\"sld.w 108[ep], gp\", operands);
output_asm_insn (\"sld.w 104[ep], r6\", operands);
output_asm_insn (\"sld.w 100[ep], r7\", operands);
output_asm_insn (\"sld.w 96[ep], r8\", operands);
output_asm_insn (\"sld.w 92[ep], r9\", operands);
output_asm_insn (\"sld.w 88[ep], r11\", operands);
output_asm_insn (\"sld.w 84[ep], r12\", operands);
output_asm_insn (\"sld.w 80[ep], r13\", operands);
output_asm_insn (\"sld.w 76[ep], r14\", operands);
output_asm_insn (\"sld.w 72[ep], r15\", operands);
output_asm_insn (\"sld.w 68[ep], r16\", operands);
output_asm_insn (\"sld.w 64[ep], r17\", operands);
output_asm_insn (\"sld.w 60[ep], r18\", operands);
output_asm_insn (\"sld.w 56[ep], r19\", operands);
output_asm_insn (\"sld.w 52[ep], r20\", operands);
output_asm_insn (\"sld.w 48[ep], r21\", operands);
output_asm_insn (\"sld.w 44[ep], r22\", operands);
output_asm_insn (\"sld.w 40[ep], r23\", operands);
output_asm_insn (\"sld.w 36[ep], r24\", operands);
output_asm_insn (\"sld.w 32[ep], r25\", operands);
output_asm_insn (\"sld.w 28[ep], r26\", operands);
output_asm_insn (\"sld.w 24[ep], r27\", operands);
output_asm_insn (\"sld.w 20[ep], r28\", operands);
output_asm_insn (\"sld.w 16[ep], r29\", operands);
output_asm_insn (\"mov r1, ep\", operands);
output_asm_insn (\"addi 120, sp, sp\", operands);
return \"\";
}
}"
[(set (attr "length")
(if_then_else (ne (symbol_ref "TARGET_LONG_CALLS") (const_int 0))
(const_int 4)
(const_int 62)
))
(set_attr "cc" "clobber")])
(define_insn "_restore_all_interrupt"
[(unspec_volatile [(const_int 0)] 1)]
"TARGET_V850 && ! TARGET_LONG_CALLS" "TARGET_V850 && ! TARGET_LONG_CALLS"
"jarl __restore_all_interrupt,r10" "jarl __restore_all_interrupt,r10"
[(set_attr "length" "4") [(set_attr "length" "4")
(set_attr "cc" "clobber")]) (set_attr "cc" "clobber")])
;; Save r6-r9 for a variable argument function ;; Save r6-r9 for a variable argument function
(define_insn "save_r6_r9_v850e"
[(set (mem:SI (reg:SI 3)) (reg:SI 6))
(set (mem:SI (plus:SI (reg:SI 3) (const_int 4))) (reg:SI 7))
(set (mem:SI (plus:SI (reg:SI 3) (const_int 8))) (reg:SI 8))
(set (mem:SI (plus:SI (reg:SI 3) (const_int 12))) (reg:SI 9))
]
"TARGET_PROLOG_FUNCTION && TARGET_V850E && !TARGET_DISABLE_CALLT"
"callt ctoff(__callt_save_r6_r9)"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_insn "save_r6_r9" (define_insn "save_r6_r9"
[(set (mem:SI (reg:SI 3)) (reg:SI 6)) [(set (mem:SI (reg:SI 3)) (reg:SI 6))
(set (mem:SI (plus:SI (reg:SI 3) (const_int 4))) (reg:SI 7)) (set (mem:SI (plus:SI (reg:SI 3) (const_int 4))) (reg:SI 7))
......
gcc/doc/invoke.texi
...@@ -577,6 +577,9 @@ in the following sections. ...@@ -577,6 +577,9 @@ in the following sections.
-mlong-calls -mno-long-calls -mep -mno-ep @gol -mlong-calls -mno-long-calls -mep -mno-ep @gol
-mprolog-function -mno-prolog-function -mspace @gol -mprolog-function -mno-prolog-function -mspace @gol
-mtda=@var{n} -msda=@var{n} -mzda=@var{n} @gol -mtda=@var{n} -msda=@var{n} -mzda=@var{n} @gol
-mapp-regs -mno-app-regs @gol
-mdisable-callt -mno-disable-callt @gol
-mv850e @gol
-mv850 -mbig-switch} -mv850 -mbig-switch}
@emph{NS32K Options} @emph{NS32K Options}
...@@ -8682,6 +8685,34 @@ Specify that the target processor is the V850. ...@@ -8682,6 +8685,34 @@ Specify that the target processor is the V850.
Generate code suitable for big switch tables. Use this option only if Generate code suitable for big switch tables. Use this option only if
the assembler/linker complain about out of range branches within a switch the assembler/linker complain about out of range branches within a switch
table. table.
@item -mapp-regs
@opindex -mapp-regs
This option will cause r2 and r5 to be used in the code generated by
the compiler. This setting is the default.
@item -mno-app-regs
@opindex -mno-app-regs
This option will cause r2 and r5 to be treated as fixed registers.
@item -mv850e
@opindex -mv850e
Specify that the target processor is the V850E. The preprocessor
constant @samp{__v850e__} will be defined if this option is used.
If neither @option{-mv850} nor @option{-mv850e} are defined
then a default target processor will be chosen and the relevant
@samp{__v850*__} preprocessor constant will be defined.
The preprocessor constants @samp{__v850} and @samp{__v851__} are always
defined, regardless of which processor variant is the target.
@item -mdisable-callt
@opindex -mdisable-callt
This option will suppress generation of the CALLT instruction for the
v850e flavors of the v850 architecture. The default is
@option{-mno-disable-callt} which allows the CALLT instruction to be used.
@end table @end table
@node ARC Options @node ARC Options
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment