Skip to content

R
riscv-gcc-1
Commit aa016ff7 by Uros Bizjak
Options

ChangeLog: Whitespace fixes. 

	* ChangeLog: Whitespace fixes.
	* testsuite/ChangeLog: Ditto.

From-SVN: r147220
parent 76104d42
Showing with 38 additions and 40 deletions
gcc/ChangeLog
......@@ -47,8 +47,7 @@
2009-05-06 H.J. Lu <hongjiu.lu@intel.com>
* config/i386/i386.md (unnamed inc/dec peephole): Use
optimize_insn_for_size_p instead
of optimize_size.
optimize_insn_for_size_p instead of optimize_size.
* config/i386/predicates.md (incdec_operand): Likewise.
(aligned_operand): Likewise.
* config/i386/sse.md (divv8sf3): Likewise.
......@@ -68,8 +67,7 @@
2009-05-06 Joseph Myers <joseph@codesourcery.com>
PR c/40032
* c-decl.c (grokdeclarator): Handle incomplete type of unnamed
field.
* c-decl.c (grokdeclarator): Handle incomplete type of unnamed field.
2009-05-05 Jakub Jelinek <jakub@redhat.com>
......@@ -114,21 +112,20 @@
2009-05-05 Richard Guenther <rguenther@suse.de>
PR middle-end/40023
* builtins.c (gimplify_va_arg_expr): Properly build the
address.
* builtins.c (gimplify_va_arg_expr): Properly build the address.
2009-05-05 Shujing Zhao <pearly.zhao@oracle.com>
* tree.h (strip_float_extensions): Remove duplicate declaration.
(build_low_bits_mask, debug_fold_checksum, expand_function_end,
expand_function_start, stack_protect_prologue, stack_protect_epilogue,
block_ultimate_origin): Rearrange the declarations line to match the
comment that indicates the .c file which the functions are defined.
(dwarf2out_*, set_decl_rtl): Add comment.
(get_base_address): Adjust comment.
(change_decl_assembler_name, maybe_fold_*, build_addr): Rearrange the
declarations line and add comment.
(is_builtin_name): Add blank after function name, for clarity.
(build_low_bits_mask, debug_fold_checksum, expand_function_end,
expand_function_start, stack_protect_prologue, stack_protect_epilogue,
block_ultimate_origin): Rearrange the declarations line to match the
comment that indicates the .c file which the functions are defined.
(dwarf2out_*, set_decl_rtl): Add comment.
(get_base_address): Adjust comment.
(change_decl_assembler_name, maybe_fold_*, build_addr): Rearrange the
declarations line and add comment.
(is_builtin_name): Add blank after function name, for clarity.
2009-05-04 Joseph Myers <joseph@codesourcery.com>
......@@ -197,7 +194,7 @@
2009-05-04 Michael Eager <eager@eagercon.com>
* config/rs6000/rs6000.c (rs6000_legitimate_address): Allow
address for DImode/DFmode only if double-precision FP regs.
address for DImode/DFmode only if double-precision FP regs.
2009-05-04 Michael Eager <eager@eagercon.com>
......@@ -228,7 +225,8 @@
* config/bfin/bfin-protos.h (legitimize_address): Remove.
* config/bfin/bfin.c (legitimize_address): Remove.
* config/bfin/bfin.h (LEGITIMIZE_ADDRESS): Remove.
* config/m68hc11/m68hc11-protos.h (m68hc11_legitimize_address): Remove.
* config/m68hc11/m68hc11-protos.h (m68hc11_legitimize_address):
Remove.
* config/m68hc11/m68hc11.c (m68hc11_legitimize_address): Remove.
* config/m68hc11/m68hc11.h (LEGITIMIZE_ADDRESS): Remove.
......@@ -270,8 +268,10 @@
* gcc/config/alpha/alpha-protos.h (alpha_legitimize_address): Delete.
* gcc/config/frv/frv-protos.h (frv_legitimize_address): Delete.
* gcc/config/spu/spu-protos.h (spu_legitimize_address): Delete.
* gcc/config/xtensa/xtensa-protos.h (xtensa_legitimize_address): Delete.
* gcc/config/rs6000/rs6000-protos.h (rs6000_legitimize_address): Delete.
* gcc/config/xtensa/xtensa-protos.h (xtensa_legitimize_address):
Delete.
* gcc/config/rs6000/rs6000-protos.h (rs6000_legitimize_address):
Delete.
* config/arm/arm.c (arm_legitimize_address): Maybe call Thumb version.
* config/m32c/m32c.c (m32c_legitimize_address): Standardize.
......@@ -318,8 +318,7 @@
(pp_base_tree_identifier): Declare as function.
(identifier_to_locale): Declare.
* Makefile.in (pretty-print.o): Update dependencies.
* varasm.c (finish_aliases_1): Use %qE for identifiers in
diagnostics.
* varasm.c (finish_aliases_1): Use %qE for identifiers in diagnostics.
2009-05-04 Richard Guenther <rguenther@suse.de>
......@@ -441,9 +440,9 @@
* tree-ssa-coalesce.c (coalesce_cost): Do not take ciritical
parameter; update callers.
(coalesce_cost_edge): EH edges are costier because they needs splitting
even if not critical and even more costier when there are multiple
EH predecestors.
(coalesce_cost_edge): EH edges are costier because they needs
splitting even if not critical and even more costier when there are
multiple EH predecestors.
2009-05-02 Jan Hubicka <jh@suse.cz>
......@@ -493,7 +492,8 @@
(ldst_entry): Rename to st_expr_entry, update users.
(free_ldst_entry): Rename to free_st_expr_entry, update users.
(free_ldst_mems): Rename to free_store_motion_mems, update users.
(enumerate_ldsts): Rename to enumerate_store_motion_mems, update caller.
(enumerate_ldsts): Rename to enumerate_store_motion_mems,
update caller.
(first_ls_expr): Rename to first_st_expr, update users.
(next_ls_expr): Rename to next_st_expr, update users.
(print_ldst_list): Rename to print_store_motion_mems. Print names of
......@@ -545,8 +545,7 @@
2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
Roland McGrath <roland@redhat.com>
* configure.ac (HAVE_LD_BUILDID): New check for ld --build-id
support.
* configure.ac (HAVE_LD_BUILDID): New check for ld --build-id support.
(ENABLE_LD_BUILDID): New configuration option.
* gcc.c [HAVE_LD_BUILDID and ENABLE_LD_BUILDID]
(LINK_BUILDID_SPEC): New macro.
......@@ -659,7 +658,7 @@
(avr_initial_elimination_offset): Define.
2009-04-29 Eric Botcazou <ebotcazou@adacore.com>
Steven Bosscher <steven@gcc.gnu.org>
Steven Bosscher <steven@gcc.gnu.org>
PR rtl-optimization/39938
* Makefile.in (cfgrtl.o): Add $(INSN_ATTR_H).
......@@ -719,12 +718,13 @@
(bfin_cpus): Add WA_LOAD_LCREGS as needed.
(struct loop_info): Remove members INIT and LOOP_INIT.
(bfin_optimize_loop): Don't set them. Reorder the code that generates
the LSETUP sequence. Allow LC to be loaded from any register, but also
add a case to push/pop a PREG scratch if ENABLE_WA_LOAD_LCREGS.
the LSETUP sequence. Allow LC to be loaded from any register, but
also add a case to push/pop a PREG scratch if ENABLE_WA_LOAD_LCREGS.
(bfin_reorg_loops): When done, split all BB_ENDs with splitting_loops
set to 1.
* config/bfin/bfin.md (loop_end splitter): Use splitting_loops instead
of reload_completed.
From Jie Zhang:
* config/bfin/bfin.md (movsi_insn): Refine constraints.
......@@ -749,8 +749,8 @@
* config/bfin/bfin.c (bfin_optimize_loop): Unify handling of
problematic last insns. Test for TYPE_CALL rather than CALL_P.
Remove special case testing for last insn of inner loops. Don't fail if
the loop ends with a jump, emit an extra nop instead.
Remove special case testing for last insn of inner loops. Don't fail
if the loop ends with a jump, emit an extra nop instead.
* config/bfin/bfin.c (bfin_register_move_cost): Test for subsets of
DREGS rather than comparing directly. Remove code that tries to
......@@ -772,12 +772,12 @@
* config/bfin/bfin.md (sp_or_sm, spm_string, spm_name): New macro.
(ss<spm_name>hi3, ss<spm_name>hi3_parts, ss<spm_name>hi3_low_parts,
ss<spm_name_hi3_high_parts): New patterns, replacing ssaddhi3, ssubhi3,
ssaddhi3_parts and sssubhi3_parts.
ss<spm_name_hi3_high_parts): New patterns, replacing ssaddhi3,
ssubhi3, ssaddhi3_parts and sssubhi3_parts.
(flag_mulhi3_parts): Produce a HImode output rather than trying to set
a VEC_SELECT.
* config/bfin/bfin.c (bfin_expand_builtin, case BFIN_BUILTIN_CPLX_SQU):
Adjust accordingly.
* config/bfin/bfin.c (bfin_expand_builtin,
case BFIN_BUILTIN_CPLX_SQU): Adjust accordingly.
2009-04-28 Richard Guenther <rguenther@suse.de>
......
gcc/testsuite/ChangeLog
......@@ -117,13 +117,11 @@
2009-05-04 Joseph Myers <joseph@codesourcery.com>
* gcc.dg/ucnid-11.c, gcc.dg/ucnid-12.c, gcc.dg/ucnid-13.c: New
tests.
* gcc.dg/ucnid-11.c, gcc.dg/ucnid-12.c, gcc.dg/ucnid-13.c: New tests.
2009-05-04 Joseph Myers <joseph@codesourcery.com>
* gcc.dg/ucnid-8.c, gcc.dg/ucnid-9.c, gcc.dg/ucnid-10.c: New
tests.
* gcc.dg/ucnid-8.c, gcc.dg/ucnid-9.c, gcc.dg/ucnid-10.c: New tests.
* gcc.dg/declspec-9.c, gcc.dg/declspec-10.c, gcc.dg/declspec-11.c:
Update expected errors.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment