Skip to content

R
riscv-gcc-1
Commit 8ca864d2 by Eric Botcazou Committed by Eric Botcazou
Options

predicates.md (arith_double_operand): Use trunc_int_for_mode if HOST_BITS_PER_WIDE_INT >=64. 

	* config/sparc/predicates.md (arith_double_operand): Use
	trunc_int_for_mode if HOST_BITS_PER_WIDE_INT >=64.
	* config/sparc/sparc.md (movqi, movhi, movsi, movqi): Use gen_int_mode.
	(DImode, DFmode constant splitters): Likewise.  Remove code for
	TARGET_ARCH64 && HOST_BITS_PER_WIDE_INT < 64.
	(logical constant splitters): Use const_int_operand predicate.
	(lshrsi3_extend): Remove code for TARGET_ARCH64 &&
	HOST_BITS_PER_WIDE_INT < 64.

From-SVN: r98560
parent 144d51f9
Showing with 40 additions and 46 deletions
gcc/ChangeLog
2005-04-22 Eric Botcazou <ebotcazou@libertysurf.fr>
* config/sparc/predicates.md (arith_double_operand): Use
trunc_int_for_mode if HOST_BITS_PER_WIDE_INT >=64.
* config/sparc/sparc.md (movqi, movhi, movsi, movqi): Use gen_int_mode.
(DImode, DFmode constant splitters): Likewise. Remove code for
TARGET_ARCH64 && HOST_BITS_PER_WIDE_INT < 64.
(logical constant splitters): Use const_int_operand predicate.
(lshrsi3_extend): Remove code for TARGET_ARCH64 &&
HOST_BITS_PER_WIDE_INT < 64.
2005-04-22 Nathan Sidwell <nathan@codesourcery.com>
* config/pa/pa.c (legitimize_pic_address): Use gcc_assert and
......
gcc/config/sparc/predicates.md
......@@ -287,8 +287,8 @@
#else
if (GET_CODE (op) != CONST_INT)
return false;
m1 = INTVAL (op) & 0xffffffff;
m2 = INTVAL (op) >> 32;
m1 = trunc_int_for_mode (INTVAL (op), SImode);
m2 = trunc_int_for_mode (INTVAL (op) >> 32, SImode);
#endif
return SPARC_SIMM13_P (m1) && SPARC_SIMM13_P (m2);
......@@ -337,7 +337,7 @@
;; Return true if OP is valid for the lhs of a comparison insn.
(define_predicate "compare_operand"
(match_code "reg, subreg, zero_extract")
(match_code "reg,subreg,zero_extract")
{
if (GET_CODE (op) == ZERO_EXTRACT)
return (register_operand (XEXP (op, 0), mode)
......
gcc/config/sparc/sparc.md
......@@ -1727,10 +1727,7 @@
/* Working with CONST_INTs is easier, so convert
a double if needed. */
if (GET_CODE (operands[1]) == CONST_DOUBLE)
{
operands[1] = GEN_INT (trunc_int_for_mode
(CONST_DOUBLE_LOW (operands[1]), QImode));
}
operands[1] = gen_int_mode (CONST_DOUBLE_LOW (operands[1]), QImode);
/* Handle sets of MEM first. */
if (GET_CODE (operands[0]) == MEM)
......@@ -1793,7 +1790,7 @@
/* Working with CONST_INTs is easier, so convert
a double if needed. */
if (GET_CODE (operands[1]) == CONST_DOUBLE)
operands[1] = GEN_INT (CONST_DOUBLE_LOW (operands[1]));
operands[1] = gen_int_mode (CONST_DOUBLE_LOW (operands[1]), HImode);
/* Handle sets of MEM first. */
if (GET_CODE (operands[0]) == MEM)
......@@ -1879,7 +1876,7 @@
/* Working with CONST_INTs is easier, so convert
a double if needed. */
if (GET_CODE (operands[1]) == CONST_DOUBLE)
operands[1] = GEN_INT (CONST_DOUBLE_LOW (operands[1]));
operands[1] = gen_int_mode (CONST_DOUBLE_LOW (operands[1]), SImode);
/* Handle sets of MEM first. */
if (GET_CODE (operands[0]) == MEM)
......@@ -2045,7 +2042,8 @@
(match_operand:DI 1 "general_operand" ""))]
""
{
/* Where possible, convert CONST_DOUBLE into a CONST_INT. */
/* Working with CONST_INTs is easier, so convert
a double if needed. */
if (GET_CODE (operands[1]) == CONST_DOUBLE
#if HOST_BITS_PER_WIDE_INT == 32
&& ((CONST_DOUBLE_HIGH (operands[1]) == 0
......@@ -2054,7 +2052,7 @@
&& (CONST_DOUBLE_LOW (operands[1]) & 0x80000000) != 0))
#endif
)
operands[1] = GEN_INT (CONST_DOUBLE_LOW (operands[1]));
operands[1] = gen_int_mode (CONST_DOUBLE_LOW (operands[1]), DImode);
/* Handle MEM cases first. */
if (GET_CODE (operands[0]) == MEM)
......@@ -2481,8 +2479,8 @@
/* Slick... but this trick loses if this subreg constant part
can be done in one insn. */
if (CONST_DOUBLE_LOW (operands[1]) == CONST_DOUBLE_HIGH (operands[1])
&& !(SPARC_SETHI32_P (CONST_DOUBLE_HIGH (operands[1]))
|| SPARC_SIMM13_P (CONST_DOUBLE_HIGH (operands[1]))))
&& ! SPARC_SETHI32_P (CONST_DOUBLE_HIGH (operands[1]))
&& ! SPARC_SIMM13_P (CONST_DOUBLE_HIGH (operands[1])))
{
emit_insn (gen_movsi (gen_lowpart (SImode, operands[0]),
gen_highpart (SImode, operands[0])));
......@@ -3090,27 +3088,26 @@
if (TARGET_ARCH64)
{
#if HOST_BITS_PER_WIDE_INT == 64
#if HOST_BITS_PER_WIDE_INT == 32
gcc_unreachable ();
#else
HOST_WIDE_INT val;
val = ((HOST_WIDE_INT)(unsigned long)l[1] |
((HOST_WIDE_INT)(unsigned long)l[0] << 32));
emit_insn (gen_movdi (operands[0], GEN_INT (val)));
#else
emit_insn (gen_movdi (operands[0],
immed_double_const (l[1], l[0], DImode)));
emit_insn (gen_movdi (operands[0], gen_int_mode (val, DImode)));
#endif
}
else
{
emit_insn (gen_movsi (gen_highpart (SImode, operands[0]),
GEN_INT (l[0])));
gen_int_mode (l[0], SImode)));
/* Slick... but this trick loses if this subreg constant part
can be done in one insn. */
if (l[1] == l[0]
&& !(SPARC_SETHI32_P (l[0])
|| SPARC_SIMM13_P (l[0])))
&& ! SPARC_SETHI32_P (l[0])
&& ! SPARC_SIMM13_P (l[0]))
{
emit_insn (gen_movsi (gen_lowpart (SImode, operands[0]),
gen_highpart (SImode, operands[0])));
......@@ -3118,7 +3115,7 @@
else
{
emit_insn (gen_movsi (gen_lowpart (SImode, operands[0]),
GEN_INT (l[1])));
gen_int_mode (l[1], SImode)));
}
}
DONE;
......@@ -5899,11 +5896,9 @@
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(and:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "" "")))
(match_operand:SI 2 "const_int_operand" "")))
(clobber (match_operand:SI 3 "register_operand" ""))]
"GET_CODE (operands[2]) == CONST_INT
&& !SMALL_INT (operands[2])
&& (INTVAL (operands[2]) & 0x3ff) == 0x3ff"
"!SMALL_INT (operands[2]) && (INTVAL (operands[2]) & 0x3ff) == 0x3ff"
[(set (match_dup 3) (match_dup 4))
(set (match_dup 0) (and:SI (not:SI (match_dup 3)) (match_dup 1)))]
{
......@@ -6002,11 +5997,9 @@
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(ior:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "" "")))
(match_operand:SI 2 "const_int_operand" "")))
(clobber (match_operand:SI 3 "register_operand" ""))]
"GET_CODE (operands[2]) == CONST_INT
&& !SMALL_INT (operands[2])
&& (INTVAL (operands[2]) & 0x3ff) == 0x3ff"
"!SMALL_INT (operands[2]) && (INTVAL (operands[2]) & 0x3ff) == 0x3ff"
[(set (match_dup 3) (match_dup 4))
(set (match_dup 0) (ior:SI (not:SI (match_dup 3)) (match_dup 1)))]
{
......@@ -6105,11 +6098,9 @@
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(xor:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "" "")))
(match_operand:SI 2 "const_int_operand" "")))
(clobber (match_operand:SI 3 "register_operand" ""))]
"GET_CODE (operands[2]) == CONST_INT
&& !SMALL_INT (operands[2])
&& (INTVAL (operands[2]) & 0x3ff) == 0x3ff"
"!SMALL_INT (operands[2]) && (INTVAL (operands[2]) & 0x3ff) == 0x3ff"
[(set (match_dup 3) (match_dup 4))
(set (match_dup 0) (not:SI (xor:SI (match_dup 3) (match_dup 1))))]
{
......@@ -6119,11 +6110,9 @@
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(not:SI (xor:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "" ""))))
(match_operand:SI 2 "const_int_operand" ""))))
(clobber (match_operand:SI 3 "register_operand" ""))]
"GET_CODE (operands[2]) == CONST_INT
&& !SMALL_INT (operands[2])
&& (INTVAL (operands[2]) & 0x3ff) == 0x3ff"
"!SMALL_INT (operands[2]) && (INTVAL (operands[2]) & 0x3ff) == 0x3ff"
[(set (match_dup 3) (match_dup 4))
(set (match_dup 0) (xor:SI (match_dup 3) (match_dup 1)))]
{
......@@ -7100,14 +7089,8 @@
[(set (match_operand:DI 0 "register_operand" "=r")
(and:DI (subreg:DI (lshiftrt:SI (match_operand:SI 1 "register_operand" "r")
(match_operand:SI 2 "arith_operand" "r")) 0)
(match_operand 3 "" "")))]
"TARGET_ARCH64
&& ((GET_CODE (operands[3]) == CONST_DOUBLE
&& CONST_DOUBLE_HIGH (operands[3]) == 0
&& CONST_DOUBLE_LOW (operands[3]) == 0xffffffff)
|| (HOST_BITS_PER_WIDE_INT >= 64
&& GET_CODE (operands[3]) == CONST_INT
&& (unsigned HOST_WIDE_INT) INTVAL (operands[3]) == 0xffffffff))"
(match_operand 3 "const_int_operand" "")))]
"TARGET_ARCH64 && (unsigned HOST_WIDE_INT) INTVAL (operands[3]) == 0xffffffff"
"srl\t%1, %2, %0"
[(set_attr "type" "shift")])
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment