sparc.h (REG_OK_FOR_INDEX_P, [...]): Remove.

	* config/sparc/sparc.h (REG_OK_FOR_INDEX_P, REG_OK_FOR_BASE_P,
	SYMBOLIC_CONST, RTX_OK_FOR_BASE_P, RTX_OK_FOR_INDEX_P): Remove.
	(RTX_OK_FOR_OFFSET_P, RTX_OK_FOR_OLO10_P): Move to...
	* config/sparc/sparc.c (RTX_OK_FOR_OFFSET_P,
	RTX_OK_FOR_OLO10_P): ...here.
	(sparc_mode_dependent_address_p): Use symbolic_operand instead of
	SYMBOLIC_CONST.

From-SVN: r173714

gcc/ChangeLog

+2011-05-12  Anatoly Sokolov  <aesok@post.ru>
+
+	* config/sparc/sparc.h (REG_OK_FOR_INDEX_P, REG_OK_FOR_BASE_P,
+	SYMBOLIC_CONST, RTX_OK_FOR_BASE_P, RTX_OK_FOR_INDEX_P): Remove.
+	(RTX_OK_FOR_OFFSET_P, RTX_OK_FOR_OLO10_P): Move to...
+	* config/sparc/sparc.c (RTX_OK_FOR_OFFSET_P,
+	RTX_OK_FOR_OLO10_P): ...here.
+	(sparc_mode_dependent_address_p): Use symbolic_operand instead of
+	SYMBOLIC_CONST.
+
 2011-05-12  Kai Tietz  <ktietz@redhat.com>
 
 	* gimplify.c (gimple_boolify): Re-boolify expression

gcc/config/sparc/sparc.c

@@ -3110,8 +3110,16 @@ legitimate_pic_operand_p (rtx x)
   return true;
 }
 
-/* Return nonzero if ADDR is a valid memory address.
-   STRICT specifies whether strict register checking applies.  */
+#define RTX_OK_FOR_OFFSET_P(X)                                          \
+  (CONST_INT_P (X) && INTVAL (X) >= -0x1000 && INTVAL (X) < 0x1000 - 8)
+
+#define RTX_OK_FOR_OLO10_P(X)                                           \
+  (CONST_INT_P (X) && INTVAL (X) >= -0x1000 && INTVAL (X) < 0xc00 - 8)
+
+/* Handle the TARGET_LEGITIMATE_ADDRESS_P target hook.
+
+   On SPARC, the actual legitimate addresses must be REG+REG or REG+SMALLINT
+   ordinarily.  This changes a bit when generating PIC.  */
 
 static bool
 sparc_legitimate_address_p (enum machine_mode mode, rtx addr, bool strict)
@@ -3706,7 +3714,7 @@ sparc_mode_dependent_address_p (const_rtx addr)
       rtx op0 = XEXP (addr, 0);
       rtx op1 = XEXP (addr, 1);
       if (op0 == pic_offset_table_rtx
-	  && SYMBOLIC_CONST (op1))
+	  && symbolic_operand (op1, VOIDmode))
 	return true;
     }
 

gcc/config/sparc/sparc.h

@@ -1538,41 +1538,6 @@ do {									\
    addresses which require two reload registers.  */
 
 #define LEGITIMATE_PIC_OPERAND_P(X) legitimate_pic_operand_p (X)
-
-/* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
-   and check its validity for a certain class.
-   We have two alternate definitions for each of them.
-   The usual definition accepts all pseudo regs; the other rejects
-   them unless they have been allocated suitable hard regs.
-   The symbol REG_OK_STRICT causes the latter definition to be used.
-
-   Most source files want to accept pseudo regs in the hope that
-   they will get allocated to the class that the insn wants them to be in.
-   Source files for reload pass need to be strict.
-   After reload, it makes no difference, since pseudo regs have
-   been eliminated by then.  */
-
-#ifndef REG_OK_STRICT
-
-/* Nonzero if X is a hard reg that can be used as an index
-   or if it is a pseudo reg.  */
-#define REG_OK_FOR_INDEX_P(X) \
-  (REGNO (X) < 32				\
-   || REGNO (X) == FRAME_POINTER_REGNUM		\
-   || REGNO (X) >= FIRST_PSEUDO_REGISTER)
-
-/* Nonzero if X is a hard reg that can be used as a base reg
-   or if it is a pseudo reg.  */
-#define REG_OK_FOR_BASE_P(X)  REG_OK_FOR_INDEX_P (X)
-
-#else
-
-/* Nonzero if X is a hard reg that can be used as an index.  */
-#define REG_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X))
-/* Nonzero if X is a hard reg that can be used as a base reg.  */
-#define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X))
-
-#endif
 
 /* Should gcc use [%reg+%lo(xx)+offset] addresses?  */
 
@@ -1582,31 +1547,6 @@ do {									\
 #define USE_AS_OFFSETABLE_LO10 0
 #endif
 
-/* On SPARC, the actual legitimate addresses must be REG+REG or REG+SMALLINT
-   ordinarily.  This changes a bit when generating PIC.  The details are
-   in sparc.c's implementation of TARGET_LEGITIMATE_ADDRESS_P.  */
-
-#define SYMBOLIC_CONST(X) symbolic_operand (X, VOIDmode)
-
-#define RTX_OK_FOR_BASE_P(X)						\
-  ((GET_CODE (X) == REG && REG_OK_FOR_BASE_P (X))			\
-  || (GET_CODE (X) == SUBREG						\
-      && GET_CODE (SUBREG_REG (X)) == REG				\
-      && REG_OK_FOR_BASE_P (SUBREG_REG (X))))
-
-#define RTX_OK_FOR_INDEX_P(X)						\
-  ((GET_CODE (X) == REG && REG_OK_FOR_INDEX_P (X))			\
-  || (GET_CODE (X) == SUBREG						\
-      && GET_CODE (SUBREG_REG (X)) == REG				\
-      && REG_OK_FOR_INDEX_P (SUBREG_REG (X))))
-
-#define RTX_OK_FOR_OFFSET_P(X)						\
-  (GET_CODE (X) == CONST_INT && INTVAL (X) >= -0x1000 && INTVAL (X) < 0x1000 - 8)
-
-#define RTX_OK_FOR_OLO10_P(X)						\
-  (GET_CODE (X) == CONST_INT && INTVAL (X) >= -0x1000 && INTVAL (X) < 0xc00 - 8)
-
-
 /* Try a machine-dependent way of reloading an illegitimate address
    operand.  If we find one, push the reload and jump to WIN.  This
    macro is used in only one place: `find_reloads_address' in reload.c.  */