Skip to content

R
riscv-gcc-1
Commit 73774972 by Eric Christopher Committed by Eric Christopher
Options

lcm.c (optimize_mode_switching): Change NORMAL_MODE to MODE_ENTRY and MODE_EXIT. 

2003-10-10  Eric Christopher  <echristo@redhat.com>

        * lcm.c (optimize_mode_switching): Change NORMAL_MODE
        to MODE_ENTRY and MODE_EXIT. Add MODE_AFTER for insns
        that set mode.
        * config/sh/sh.h (MODE_ENTRY): New macro.
        (MODE_EXIT): Ditto.
        (MODE_AFTER): Ditto.
        * config/sh/sh.md: Change for MODE_AFTER. Add
        fp_set attribute.
        * doc/tm.texi: Document MODE_AFTER, MODE_ENTRY, and MODE_EXIT.

From-SVN: r72315
parent 8d61e55e
Showing with 139 additions and 79 deletions
gcc/ChangeLog
2003-10-10 Eric Christopher <echristo@redhat.com>
* lcm.c (optimize_mode_switching): Change NORMAL_MODE
to MODE_ENTRY and MODE_EXIT. Add MODE_AFTER for insns
that set mode.
* config/sh/sh.h (MODE_ENTRY): New macro.
(MODE_EXIT): Ditto.
(MODE_AFTER): Ditto.
* config/sh/sh.md: Change for MODE_AFTER. Add
fp_set attribute.
* doc/tm.texi: Document MODE_AFTER, MODE_ENTRY, and MODE_EXIT.
2003-10-10 Zack Weinberg <zack@codesourcery.com>
* genmodes.c, mode-classes.def: New files.
......
gcc/config/sh/sh.h
......@@ -1254,7 +1254,7 @@ enum reg_class
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x000000ff }, \
/* ALL_REGS: */ \
{ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x01ffffff }, \
}
}
/* The same information, inverted:
Return the class number of the smallest class containing
......@@ -1645,7 +1645,7 @@ extern enum reg_class reg_class_from_letter[];
|| TREE_CODE (VALTYPE) == OFFSET_TYPE)) \
? (TARGET_SHMEDIA ? DImode : SImode) : TYPE_MODE (VALTYPE)), \
BASE_RETURN_VALUE_REG (TYPE_MODE (VALTYPE)))
/* Define how to find the value returned by a library function
assuming the value has mode MODE. */
#define LIBCALL_VALUE(MODE) \
......@@ -2073,7 +2073,7 @@ struct sh_args {
#define EXIT_IGNORE_STACK 1
/*
/*
On the SH, the trampoline looks like
2 0002 D202 mov.l l2,r2
1 0000 D301 mov.l l1,r3
......@@ -3189,7 +3189,7 @@ extern int rtx_equal_function_value_matters;
#define any_register_operand register_operand
/* Define this macro if it is advisable to hold scalars in registers
in a wider mode than that declared by the program. In such cases,
in a wider mode than that declared by the program. In such cases,
the value is constrained to be within the bounds of the declared
type, but kept valid in the wider mode. The signedness of the
extension may differ from that of the type.
......@@ -3234,6 +3234,11 @@ extern int rtx_equal_function_value_matters;
? (TARGET_FMOVD ? FP_MODE_DOUBLE : FP_MODE_NONE) \
: ACTUAL_NORMAL_MODE (ENTITY))
#define MODE_ENTRY(ENTITY) NORMAL_MODE (ENTITY)
#define MODE_EXIT(ENTITY) \
(sh_cfun_attr_renesas_p () ? FP_MODE_NONE : NORMAL_MODE (ENTITY))
#define EPILOGUE_USES(REGNO) ((TARGET_SH2E || TARGET_SH4) \
&& (REGNO) == FPSCR_REG)
......@@ -3242,6 +3247,12 @@ extern int rtx_equal_function_value_matters;
? get_attr_fp_mode (INSN) \
: FP_MODE_NONE)
#define MODE_AFTER(MODE, INSN) \
(recog_memoized (INSN) >= 0 \
&& get_attr_fp_set (INSN) != FP_SET_NONE \
? get_attr_fp_set (INSN) \
: (MODE))
#define MODE_PRIORITY_TO_MODE(ENTITY, N) \
((TARGET_FPU_SINGLE != 0) ^ (N) ? FP_MODE_SINGLE : FP_MODE_DOUBLE)
......
gcc/doc/tm.texi
......@@ -320,14 +320,14 @@ default value of this macro, will expand to the value of
@end defmac
@defmac SYSROOT_SUFFIX_SPEC
Define this macro to add a suffix to the target sysroot when GCC is
configured with a sysroot. This will cause GCC to search for usr/lib,
et al, within sysroot+suffix.
Define this macro to add a suffix to the target sysroot when GCC is
configured with a sysroot. This will cause GCC to search for usr/lib,
et al, within sysroot+suffix.
@end defmac
@defmac SYSROOT_HEADERS_SUFFIX_SPEC
Define this macro to add a headers_suffix to the target sysroot when
GCC is configured with a sysroot. This will cause GCC to pass the
Define this macro to add a headers_suffix to the target sysroot when
GCC is configured with a sysroot. This will cause GCC to pass the
updated sysroot+headers_suffix to CPP@, causing it to search for
usr/include, et al, within sysroot+headers_suffix.
@end defmac
......@@ -2696,11 +2696,11 @@ A C expression that defines the optional machine-dependent constraint
letters, amongst those accepted by @code{EXTRA_CONSTRAINT}, that should
be treated like memory constraints by the reload pass.
It should return 1 if the operand type represented by the constraint
It should return 1 if the operand type represented by the constraint
at the start of @var{str}, the first letter of which is the letter @var{c},
comprises a subset of all memory references including
all those whose address is simply a base register. This allows the reload
pass to reload an operand, if it does not directly correspond to the operand
all those whose address is simply a base register. This allows the reload
pass to reload an operand, if it does not directly correspond to the operand
type of @var{c}, by copying its address into a base register.
For example, on the S/390, some instructions do not accept arbitrary
......@@ -2720,15 +2720,15 @@ letters, amongst those accepted by @code{EXTRA_CONSTRAINT} /
@code{EXTRA_CONSTRAINT_STR}, that should
be treated like address constraints by the reload pass.
It should return 1 if the operand type represented by the constraint
It should return 1 if the operand type represented by the constraint
at the start of @var{str}, which starts with the letter @var{c}, comprises
a subset of all memory addresses including
all those that consist of just a base register. This allows the reload
pass to reload an operand, if it does not directly correspond to the operand
all those that consist of just a base register. This allows the reload
pass to reload an operand, if it does not directly correspond to the operand
type of @var{str}, by copying it into a base register.
Any constraint marked as @code{EXTRA_ADDRESS_CONSTRAINT} can only
be used with the @code{address_operand} predicate. It is treated
be used with the @code{address_operand} predicate. It is treated
analogously to the @samp{p} constraint.
@end defmac
......@@ -2905,9 +2905,9 @@ If this RTL is a @code{REG}, you should also define
@end defmac
@defmac DWARF_ALT_FRAME_RETURN_COLUMN
A C expression whose value is an integer giving a DWARF 2 column
A C expression whose value is an integer giving a DWARF 2 column
number that may be used as an alternate return column. This should
be defined only if @code{DWARF_FRAME_RETURN_COLUMN} is set to a
be defined only if @code{DWARF_FRAME_RETURN_COLUMN} is set to a
general register, but an alternate column needs to be used for
signal frames.
@end defmac
......@@ -2970,10 +2970,10 @@ Typically this is a call-clobbered hard register that is otherwise
untouched by the epilogue, but could also be a stack slot.
Do not define this macro if the stack pointer is saved and restored
by the regular prolog and epilog code in the call frame itself; in
this case, the exception handling library routines will update the
stack location to be restored in place. Otherwise, you must define
this macro if you want to support call frame exception handling like
by the regular prolog and epilog code in the call frame itself; in
this case, the exception handling library routines will update the
stack location to be restored in place. Otherwise, you must define
this macro if you want to support call frame exception handling like
that provided by DWARF 2.
@end defmac
......@@ -2986,8 +2986,8 @@ Typically this is the location in the call frame at which the normal
return address is stored. For targets that return by popping an
address off the stack, this might be a memory address just below
the @emph{target} call frame rather than inside the current call
frame. If defined, @code{EH_RETURN_STACKADJ_RTX} will have already
been assigned, so it may be used to calculate the location of the
frame. If defined, @code{EH_RETURN_STACKADJ_RTX} will have already
been assigned, so it may be used to calculate the location of the
target call frame.
Some targets have more complex requirements than storing to an
......@@ -3265,7 +3265,7 @@ is different than the internal representation for unwind column.
Given a dwarf register, this macro should return the internal unwind
column number to use instead.
See the PowerPC's SPE target for an example.
See the PowerPC's SPE target for an example.
@end defmac
@node Elimination
......@@ -4666,7 +4666,7 @@ don't need to define this macro.
@findex gofast_maybe_init_libfuncs
@defmac US_SOFTWARE_GOFAST
Define this macro if your system C library uses the US Software GOFAST
library to provide floating point emulation.
library to provide floating point emulation.
In addition to defining this macro, your architecture must set
@code{TARGET_INIT_LIBFUNCS} to @code{gofast_maybe_init_libfuncs}, or
......@@ -6510,7 +6510,7 @@ provided.
A C statement (sans semicolon) to output to the stdio stream
@var{stream} a directive telling the assembler to calculate the size of
the symbol @var{name} by subtracting its address from the current
address.
address.
If you define @code{SIZE_ASM_OP}, a default definition of this macro is
provided. The default assumes that the assembler recognizes a special
......@@ -8226,7 +8226,8 @@ return nonzero for any @var{entity} that needs mode-switching.
If you define this macro, you also have to define
@code{NUM_MODES_FOR_MODE_SWITCHING}, @code{MODE_NEEDED},
@code{MODE_PRIORITY_TO_MODE} and @code{EMIT_MODE_SET}.
@code{NORMAL_MODE} is optional.
@code{MODE_AFTER}, @code{MODE_ENTRY}, and @code{MODE_EXIT}
are optional.
@end defmac
@defmac NUM_MODES_FOR_MODE_SWITCHING
......@@ -8250,10 +8251,24 @@ return an integer value not larger than the corresponding element in
be switched into prior to the execution of @var{insn}.
@end defmac
@defmac NORMAL_MODE (@var{entity})
@defmac MODE_AFTER (@var{mode}, @var{insn})
If this macro is defined, it is evaluated for every @var{insn} during
mode switching. It determines the mode that an insn results in (if
different from the incoming mode).
@end defmac
@defmac MODE_ENTRY (@var{entity})
If this macro is defined, it is evaluated for every @var{entity} that needs
mode switching. It should evaluate to an integer, which is a mode that
@var{entity} is assumed to be switched to at function entry. If @code{MODE_ENTRY}
is defined then @code{MODE_EXIT} must be defined.
@end defmac
@defmac MODE_EXIT (@var{entity})
If this macro is defined, it is evaluated for every @var{entity} that needs
mode switching. It should evaluate to an integer, which is a mode that
@var{entity} is assumed to be switched to at function entry and exit.
mode switching. It should evaluate to an integer, which is a mode that
@var{entity} is assumed to be switched to at function exit. If @code{MODE_EXIT}
is defined then @code{MODE_ENTRY} must be defined.
@end defmac
@defmac MODE_PRIORITY_TO_MODE (@var{entity}, @var{n})
......@@ -9152,7 +9167,7 @@ to reserve space for caller-saved target registers.
@end deftypefn
@defmac POWI_MAX_MULTS
If defined, this macro is interpreted as a signed integer C expression
If defined, this macro is interpreted as a signed integer C expression
that specifies the maximum number of floating point multiplications
that should be emitted when expanding exponentiation by an integer
constant inline. When this value is defined, exponentiation requiring
......@@ -9160,4 +9175,3 @@ more than this number of multiplications is implemented by calling the
system library's @code{pow}, @code{powf} or @code{powl} routines.
The default value places no upper bound on the multiplication count.
@end defmac
gcc/lcm.c
......@@ -958,6 +958,12 @@ reg_becomes_live (rtx reg, rtx setter ATTRIBUTE_UNUSED, void *live)
SET_HARD_REG_BIT (* (HARD_REG_SET *) live, regno + nregs);
}
/* Make sure if MODE_ENTRY is defined the MODE_EXIT is defined
and vice versa. */
#if defined (MODE_ENTRY) != defined (MODE_EXIT)
#error "Both MODE_ENTRY and MODE_EXIT must be defined"
#endif
/* Find all insns that need a particular mode setting, and insert the
necessary mode switches. Return true if we did work. */
......@@ -990,7 +996,7 @@ optimize_mode_switching (FILE *file)
/* Create the list of segments within each basic block.
If NORMAL_MODE is defined, allow for two extra
blocks split from the entry and exit block. */
#ifdef NORMAL_MODE
#if defined (MODE_ENTRY) && defined (MODE_EXIT)
entry_exit_extra = 2;
#endif
bb_info[n_entities]
......@@ -1003,7 +1009,7 @@ optimize_mode_switching (FILE *file)
if (! n_entities)
return 0;
#ifdef NORMAL_MODE
#if defined (MODE_ENTRY) && defined (MODE_EXIT)
{
/* Split the edge from the entry block and the fallthrough edge to the
exit block, so that we can note that there NORMAL_MODE is supplied /
......@@ -1068,7 +1074,9 @@ optimize_mode_switching (FILE *file)
add_seginfo (info + bb->index, ptr);
RESET_BIT (transp[bb->index], j);
}
#ifdef MODE_AFTER
last_mode = MODE_AFTER (last_mode, insn);
#endif
/* Update LIVE_NOW. */
for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
if (REG_NOTE_KIND (link) == REG_DEAD)
......@@ -1089,9 +1097,9 @@ optimize_mode_switching (FILE *file)
add_seginfo (info + bb->index, ptr);
}
}
#ifdef NORMAL_MODE
#if defined (MODE_ENTRY) && defined (MODE_EXIT)
{
int mode = NORMAL_MODE (e);
int mode = MODE_ENTRY (e);
if (mode != no_mode)
{
......@@ -1109,7 +1117,7 @@ optimize_mode_switching (FILE *file)
info[bb->index].computing = mode;
if (pre_exit)
info[pre_exit->index].seginfo->mode = mode;
info[pre_exit->index].seginfo->mode = MODE_EXIT (e);
}
}
#endif /* NORMAL_MODE */
......@@ -1285,7 +1293,7 @@ optimize_mode_switching (FILE *file)
if (need_commit)
commit_edge_insertions ();
#ifdef NORMAL_MODE
#if defined (MODE_ENTRY) && defined (MODE_EXIT)
cleanup_cfg (CLEANUP_NO_INSN_DEL);
#else
if (!need_commit && !emited)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment