Skip to content

R
riscv-gcc-1
Commit 6627b7f9 by Richard Sandiford Committed by Richard Sandiford
Options

config.gcc (mips-sgi-irix6*o32, [...]): Add mips/sdb.h to the list of include files when using gas. 

	* config.gcc (mips-sgi-irix6*o32, mips-sgi-irix5*): Add mips/sdb.h
	to the list of include files when using gas.
	(mips*el-*-openbsd*, mips*-*-openbsd*): Add mips/sdb.h unconditionally.
	* config/mips/elf.h: Remove #undef SDB_DEBUGGING_INFO.
	* config/mips/elf64.h: Likewise.
	* config/mips/iris5.h: Likewise.
	* config/mips/linux.h: Likewise.
	* config/mips/iris5gas.h (SDB_DEBUGGING_INFO): Remove definition.
	* config/mips/mips.h (PREFERRED_DEBUGGING_TYPE): Likewise.
	(SDB_DEBUGGING_INFO, sdb*, SDB_ALLOW_*, PUT_SDB*): Move to...
	* config/mips/sdb.h: ...this new file.

From-SVN: r69345
parent 33971b58
Showing with 107 additions and 80 deletions
gcc/ChangeLog
2003-07-14 Richard Sandiford <rsandifo@redhat.com>
* config.gcc (mips-sgi-irix6*o32, mips-sgi-irix5*): Add mips/sdb.h
to the list of include files when using gas.
(mips*el-*-openbsd*, mips*-*-openbsd*): Add mips/sdb.h unconditionally.
* config/mips/elf.h: Remove #undef SDB_DEBUGGING_INFO.
* config/mips/elf64.h: Likewise.
* config/mips/iris5.h: Likewise.
* config/mips/linux.h: Likewise.
* config/mips/iris5gas.h (SDB_DEBUGGING_INFO): Remove definition.
* config/mips/mips.h (PREFERRED_DEBUGGING_TYPE): Likewise.
(SDB_DEBUGGING_INFO, sdb*, SDB_ALLOW_*, PUT_SDB*): Move to...
* config/mips/sdb.h: ...this new file.
2003-07-14 Douglas Rupp <rupp@gnat.com>
* fixinc/server.c (server_setup): Don't use non-POSIX NULL first
......
gcc/config.gcc
......@@ -1397,7 +1397,7 @@ mips-sgi-irix6*o32) # SGI System V.4., IRIX 6, O32 ABI
tm_file="${tm_file} mips/iris5.h"
if test x$gas = xyes
then
tm_file="${tm_file} mips/iris5gas.h mips/iris6-o32-gas.h"
tm_file="${tm_file} mips/sdb.h mips/iris5gas.h mips/iris6-o32-gas.h"
if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
......@@ -1447,7 +1447,7 @@ mips-sgi-irix5*) # SGI System V.4., IRIX 5
tm_file="${tm_file} mips/iris5.h"
if test x$gas = xyes
then
tm_file="${tm_file} mips/iris5gas.h"
tm_file="${tm_file} mips/sdb.h mips/iris5gas.h"
if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
......@@ -1501,10 +1501,11 @@ mips*-*-linux*) # Linux MIPS, either endian.
;;
mips*el-*-openbsd*) # mips little endian
target_cpu_default="MASK_GAS|MASK_ABICALLS"
tm_file="${tm_file} mips/sdb.h"
;;
mips*-*-openbsd*) # mips big endian
target_cpu_default="MASK_GAS|MASK_ABICALLS"
tm_file="mips/openbsd-be.h ${tm_file}"
tm_file="mips/openbsd-be.h ${tm_file} mips/sdb.h"
;;
mipsisa32-*-elf* | mipsisa32el-*-elf*)
tm_file="${tm_file} mips/elf.h"
......
gcc/config/mips/elf.h
......@@ -24,9 +24,6 @@ Boston, MA 02111-1307, USA. */
#undef OBJECT_FORMAT_COFF
#undef EXTENDED_COFF
/* ??? Move all SDB stuff into separate header file. */
#undef SDB_DEBUGGING_INFO
#define DBX_DEBUGGING_INFO 1
#define DWARF2_DEBUGGING_INFO 1
......
gcc/config/mips/elf64.h
......@@ -23,7 +23,6 @@ Boston, MA 02111-1307, USA. */
#undef OBJECT_FORMAT_COFF
#undef EXTENDED_COFF
#undef SDB_DEBUGGING_INFO
#define DBX_DEBUGGING_INFO 1
#define DWARF2_DEBUGGING_INFO 1
......
gcc/config/mips/iris5.h
......@@ -140,7 +140,6 @@ Boston, MA 02111-1307, USA. */
/* We don't support debugging info for now. */
#undef DBX_DEBUGGING_INFO
#undef SDB_DEBUGGING_INFO
#undef MIPS_DEBUGGING_INFO
#undef PREFERRED_DEBUGGING_TYPE
......
gcc/config/mips/iris5gas.h
......@@ -3,7 +3,6 @@
/* Enable debugging. */
#define DBX_DEBUGGING_INFO 1
#define DWARF2_DEBUGGING_INFO 1
#define SDB_DEBUGGING_INFO 1
#define MIPS_DEBUGGING_INFO 1
#define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
......
gcc/config/mips/linux.h
......@@ -226,10 +226,6 @@ do { \
#undef ASM_OUTPUT_REG_PUSH
#undef ASM_OUTPUT_REG_POP
/* The current Linux binutils uses MIPS_STABS_ELF and doesn't support
COFF. */
#undef SDB_DEBUGGING_INFO
#undef LIB_SPEC
#define LIB_SPEC "\
%{shared: -lc} \
......
gcc/config/mips/mips.h
......@@ -117,8 +117,6 @@ extern int num_source_filenames; /* current .file # */
extern int inside_function; /* != 0 if inside of a function */
extern int ignore_line_number; /* != 0 if we are to ignore next .loc */
extern int file_in_function_warning; /* warning given about .file in func */
extern int sdb_label_count; /* block start/end next label # */
extern int sdb_begin_function_line; /* Starting Line of current function */
extern int mips_section_threshold; /* # bytes of data/sdata cutoff */
extern int sym_lineno; /* sgi next label # for each stmt */
extern int set_noreorder; /* # of nested .set noreorder's */
......@@ -1257,14 +1255,9 @@ extern int mips_abi;
#endif
#define SDB_DEBUGGING_INFO 1 /* generate info for mips-tfile */
#define DBX_DEBUGGING_INFO 1 /* generate stabs (OSF/rose) */
#define MIPS_DEBUGGING_INFO 1 /* MIPS specific debugging info */
#ifndef PREFERRED_DEBUGGING_TYPE /* assume SDB_DEBUGGING_INFO */
#define PREFERRED_DEBUGGING_TYPE SDB_DEBUG
#endif
/* By default, turn on GDB extensions. */
#define DEFAULT_GDB_EXTENSIONS 1
......@@ -1292,12 +1285,6 @@ extern int mips_abi;
#define USER_LABEL_PREFIX ""
#endif
/* Forward references to tags are allowed. */
#define SDB_ALLOW_FORWARD_REFERENCES
/* Unknown tags are also allowed. */
#define SDB_ALLOW_UNKNOWN_REFERENCES
/* On Sun 4, this limit is 2048. We use 1500 to be safe,
since the length can run past this up to a continuation point. */
#undef DBX_CONTIN_LENGTH
......@@ -1330,60 +1317,6 @@ extern int mips_abi;
#define FIND_BASE_TERM(X) mips_delegitimize_address (X)
#define PUT_SDB_DEF(a) \
do { \
fprintf (asm_out_file, "\t%s.def\t", \
(TARGET_GAS) ? "" : "#"); \
ASM_OUTPUT_LABELREF (asm_out_file, a); \
fputc (';', asm_out_file); \
} while (0)
#define PUT_SDB_PLAIN_DEF(a) \
do { \
fprintf (asm_out_file, "\t%s.def\t.%s;", \
(TARGET_GAS) ? "" : "#", (a)); \
} while (0)
/* For block start and end, we create labels, so that
later we can figure out where the correct offset is.
The normal .ent/.end serve well enough for functions,
so those are just commented out. */
#define PUT_SDB_BLOCK_START(LINE) \
do { \
fprintf (asm_out_file, \
"%sLb%d:\n\t%s.begin\t%sLb%d\t%d\n", \
LOCAL_LABEL_PREFIX, \
sdb_label_count, \
(TARGET_GAS) ? "" : "#", \
LOCAL_LABEL_PREFIX, \
sdb_label_count, \
(LINE)); \
sdb_label_count++; \
} while (0)
#define PUT_SDB_BLOCK_END(LINE) \
do { \
fprintf (asm_out_file, \
"%sLe%d:\n\t%s.bend\t%sLe%d\t%d\n", \
LOCAL_LABEL_PREFIX, \
sdb_label_count, \
(TARGET_GAS) ? "" : "#", \
LOCAL_LABEL_PREFIX, \
sdb_label_count, \
(LINE)); \
sdb_label_count++; \
} while (0)
#define PUT_SDB_FUNCTION_START(LINE)
#define PUT_SDB_FUNCTION_END(LINE) \
do { \
ASM_OUTPUT_SOURCE_LINE (asm_out_file, LINE + sdb_begin_function_line, 0); \
} while (0)
#define PUT_SDB_EPILOGUE_END(NAME)
/* Correct the offset of automatic variables and arguments. Note that
the MIPS debug format wants all automatic variables and arguments
to be in terms of the virtual frame pointer (stack pointer before
......
gcc/config/mips/sdb.h 0 → 100644
/* Generate SDB debugging info.
Copyright (C) 2003 Free Software Foundation, Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING. If not, write to the Free
Software Foundation, 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA. */
/* Note that no configuration uses sdb as its preferred format. */
#define SDB_DEBUGGING_INFO 1
/* Forward references to tags are allowed. */
#define SDB_ALLOW_FORWARD_REFERENCES
/* Unknown tags are also allowed. */
#define SDB_ALLOW_UNKNOWN_REFERENCES
/* Block start/end next label #. */
extern int sdb_label_count;
/* Starting line of current function. */
extern int sdb_begin_function_line;
#define PUT_SDB_DEF(a) \
do { \
fprintf (asm_out_file, "\t%s.def\t", \
(TARGET_GAS) ? "" : "#"); \
ASM_OUTPUT_LABELREF (asm_out_file, a); \
fputc (';', asm_out_file); \
} while (0)
#define PUT_SDB_PLAIN_DEF(a) \
do { \
fprintf (asm_out_file, "\t%s.def\t.%s;", \
(TARGET_GAS) ? "" : "#", (a)); \
} while (0)
/* For block start and end, we create labels, so that
later we can figure out where the correct offset is.
The normal .ent/.end serve well enough for functions,
so those are just commented out. */
#define PUT_SDB_BLOCK_START(LINE) \
do { \
fprintf (asm_out_file, \
"%sLb%d:\n\t%s.begin\t%sLb%d\t%d\n", \
LOCAL_LABEL_PREFIX, \
sdb_label_count, \
(TARGET_GAS) ? "" : "#", \
LOCAL_LABEL_PREFIX, \
sdb_label_count, \
(LINE)); \
sdb_label_count++; \
} while (0)
#define PUT_SDB_BLOCK_END(LINE) \
do { \
fprintf (asm_out_file, \
"%sLe%d:\n\t%s.bend\t%sLe%d\t%d\n", \
LOCAL_LABEL_PREFIX, \
sdb_label_count, \
(TARGET_GAS) ? "" : "#", \
LOCAL_LABEL_PREFIX, \
sdb_label_count, \
(LINE)); \
sdb_label_count++; \
} while (0)
#define PUT_SDB_FUNCTION_START(LINE)
#define PUT_SDB_FUNCTION_END(LINE) \
do { \
ASM_OUTPUT_SOURCE_LINE (asm_out_file, LINE + sdb_begin_function_line, 0); \
} while (0)
#define PUT_SDB_EPILOGUE_END(NAME)
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment