Improve support for arm-wince-pe target:

	* config.gcc: Add arm-wince-pe target.
	* config/arm/pe.h (MULTILIB_DEFAULTS): Define.
        Add comment about default apcs26 support.
	* config/arm/t-pe (MULTILIB_OPTIONS): Add an -mapcs-32
	multilib.
        (MULTILIB_DIRNAMES): Add 'apcs32'.
	* config/arm/t-wince-pe: New makefile fragment.
	* config/arm/wince-pe.h: New file.  Overrides a few definitions
	in arm/pe.h

From-SVN: r67705

gcc/ChangeLog

+2003-06-10  Nick Clifton  <nickc@redhat.com>
+
+	* config.gcc: Add arm-wince-pe target.
+	* config/arm/pe.h (MULTILIB_DEFAULTS): Define.
+        Add comment about default apcs26 support.
+	* config/arm/t-pe (MULTILIB_OPTIONS): Add an -mapcs-32
+	multilib.
+        (MULTILIB_DIRNAMES): Add 'apcs32'.
+	* config/arm/t-wince-pe: New makefile fragment.
+	* config/arm/wince-pe.h: New file.  Overrides a few definitions
+	in arm/pe.h
+
 2003-06-10  Roger Sayle  <roger@eyesopen.com>
 
 	* builtins.c (fold_builtin): Optimize cos(-x) as cos(x).

gcc/config.gcc

@@ -695,6 +695,11 @@ arm*-*-elf | ep9312-*-elf)
 	tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
 	tmake_file=arm/t-arm-elf
 	;;
+arm*-wince-pe*)
+	tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h arm/pe.h arm/wince-pe.h"
+	tmake_file=arm/t-wince-pe
+	extra_objs="pe.o"
+	;;
 arm-*-pe*)
 	tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h arm/pe.h"
 	tmake_file=arm/t-pe

gcc/config/arm/pe.h

@@ -65,9 +65,18 @@
   N_("Ignore dllimport attribute for functions") },		\
 { "no-nop-fun-dllimport",	- TARGET_FLAG_NOP_FUN, "" },
 
+/* Defaulting to APCS-26 support is a legacy issue.   It has been done
+   that way for a long time, so changing it will probably break some
+   people's worlds.  Support for APCS-32 is now enabled as a multilib,
+   and at some point in the future APCS-32 may become the default.
+   Possibly when chips that support APCS-26 are no longer made.  */
+
 #undef  TARGET_DEFAULT
 #define TARGET_DEFAULT	(ARM_FLAG_SOFT_FLOAT | TARGET_FLAG_NOP_FUN)
 
+#undef  MULTILIB_DEFAULTS
+#define MULTILIB_DEFAULTS \
+  { "marm", "mlittle-endian", "msoft-float", "mapcs-26", "mno-thumb-interwork" }  
 
 #undef  WCHAR_TYPE
 #define WCHAR_TYPE 	"short unsigned int"
@@ -92,7 +101,7 @@
 #define SUPPORTS_ONE_ONLY 1
 
 /* Switch into a generic section.  */
-#undef TARGET_ASM_NAMED_SECTION
+#undef  TARGET_ASM_NAMED_SECTION
 #define TARGET_ASM_NAMED_SECTION  default_pe_asm_named_section
 
 /* This outputs a lot of .req's to define alias for various registers.

gcc/config/arm/t-pe

@@ -24,8 +24,8 @@ pe.o: $(srcdir)/config/arm/pe.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
   $(RTL_H) output.h flags.h $(TREE_H) expr.h toplev.h $(TM_P_H)
 	$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/config/arm/pe.c
 
-MULTILIB_OPTIONS = mhard-float mthumb
-MULTILIB_DIRNAMES = fpu thumb
+MULTILIB_OPTIONS = mhard-float mthumb mapcs-32
+MULTILIB_DIRNAMES = fpu thumb apcs32
 
 LIBGCC = stmp-multilib
 INSTALL_LIBGCC = install-multilib

gcc/config/arm/t-wince-pe

+LIB1ASMSRC = arm/lib1funcs.asm
+LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_tls _call_via_rX _interwork_call_via_rX
+
+# We want fine grained libraries, so use the new code to build the
+# floating point emulation libraries.
+FPBIT = fp-bit.c
+DPBIT = dp-bit.c
+
+fp-bit.c: $(srcdir)/config/fp-bit.c
+	echo '#define FLOAT' > fp-bit.c
+	echo '#ifndef __ARMEB__' >> fp-bit.c
+	echo '#define FLOAT_BIT_ORDER_MISMATCH' >> fp-bit.c
+	echo '#endif' >> fp-bit.c
+	cat $(srcdir)/config/fp-bit.c >> fp-bit.c
+
+dp-bit.c: $(srcdir)/config/fp-bit.c
+	echo '#ifndef __ARMEB__' > dp-bit.c
+	echo '#define FLOAT_BIT_ORDER_MISMATCH' >> dp-bit.c
+	echo '#define FLOAT_WORD_ORDER_MISMATCH' >> dp-bit.c
+	echo '#endif' >> dp-bit.c
+	cat $(srcdir)/config/fp-bit.c >> dp-bit.c
+
+pe.o: $(srcdir)/config/arm/pe.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
+  $(RTL_H) output.h flags.h $(TREE_H) expr.h toplev.h $(TM_P_H)
+	$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/config/arm/pe.c
+
+MULTILIB_OPTIONS = mhard-float mapcs-26
+MULTILIB_DIRNAMES = fpu apcs26
+# Note - Thumb multilib omitted because Thumb apcs32 support for
+# arm-wince-pe target does not appear to be working in binutils
+# yet... 
+# MULTILIB_OPTIONS += thumb
+# MULTILIB_DIRNAMES += thumb
+
+LIBGCC = stmp-multilib
+INSTALL_LIBGCC = install-multilib
+TARGET_LIBGCC2_CFLAGS = -Dinhibit_libc

gcc/config/arm/wince-pe.h

+/* Definitions of target machine for GNU compiler, for ARM with WINCE-PE obj format.
+   Copyright (C) 2003 Free Software Foundation, Inc.
+   Contributed by Nick Clifton <nickc@redhat.com>
+   
+   This file is part of GCC.
+
+   GCC is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published
+   by the Free Software Foundation; either version 2, or (at your
+   option) any later version.
+
+   GCC is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+   License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with GCC; see the file COPYING.  If not, write to
+   the Free Software Foundation, 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+/* Override arm/pe.h's default apcs26 support.  */
+
+#undef  TARGET_DEFAULT
+#define TARGET_DEFAULT	(ARM_FLAG_APCS_32 | ARM_FLAG_SOFT_FLOAT | TARGET_FLAG_NOP_FUN)
+
+#undef  MULTILIB_DEFAULTS
+#define MULTILIB_DEFAULTS \
+  { "marm", "mlittle-endian", "msoft-float", "mapcs-32", "mno-thumb-interwork" }