msp430.c (msp430_print_operand): Rename %B to %b and %A to %Q.

	* config/msp430/msp430.c (msp430_print_operand): Rename %B to %b
	and %A to %Q.  Add %A, %B, %C and %D as selectors for 16-bit parts
	of a 64-bit operand.
	* config/msp430/msp430.md: Replace uses of %B with %b and uses of
	%A with %q.

From-SVN: r206247

gcc/ChangeLog

+2013-12-30  Nick Clifton  <nickc@redhat.com>
+
+	* config/msp430/msp430.c (msp430_print_operand): Rename %B to %b
+	and %A to %Q.  Add %A, %B, %C and %D as selectors for 16-bit parts
+	of a 64-bit operand.
+	* config/msp430/msp430.md: Replace uses of %B with %b and uses of
+	%A with %q.
+
 2013-12-30  Felix Yang  <felix.yang@huawei.com>
 
 	* ira-costs.c (cost_classes_hasher::equal): Check equality of

gcc/config/msp430/msp430.c

@@ -1914,6 +1914,24 @@ msp430_print_operand_addr (FILE * file, rtx addr)
 #undef  TARGET_PRINT_OPERAND
 #define TARGET_PRINT_OPERAND		msp430_print_operand
 
+/* A   low 16-bits of int/lower of register pair
+   B   high 16-bits of int/higher of register pair
+   C   bits 32-47 of a 64-bit value/reg 3 of a DImode value
+   D   bits 48-63 of a 64-bit value/reg 4 of a DImode value
+   H   like %B (for backwards compatibility)
+   I   inverse of value
+   L   like %A (for backwards compatibility)
+   O   offset of the top of the stack
+   Q   like X but generates an A postfix
+   R   inverse of condition code, unsigned.
+   X   X instruction postfix in large mode
+   Y   value - 4
+   Z   value - 1
+   b   .B or .W or .A, depending upon the mode
+   p   bit position
+   r   inverse of condition code
+   x   like X but only for pointers.  */
+
 static void
 msp430_print_operand (FILE * file, rtx op, int letter)
 {
@@ -1978,7 +1996,7 @@ msp430_print_operand (FILE * file, rtx op, int letter)
       gcc_assert (CONST_INT_P (op));
       fprintf (file, "#%d", 1 << INTVAL (op));
       return;
-    case 'B':
+    case 'b':
       switch (GET_MODE (op))
 	{
 	case QImode: fprintf (file, ".B"); return;
@@ -1988,6 +2006,7 @@ msp430_print_operand (FILE * file, rtx op, int letter)
 	default:
 	  return;
 	}
+    case 'A':
     case 'L': /* Low half.  */
       switch (GET_CODE (op))
 	{
@@ -2005,6 +2024,7 @@ msp430_print_operand (FILE * file, rtx op, int letter)
 	  gcc_unreachable ();
 	}
       break;
+    case 'B':
     case 'H': /* high half */
       switch (GET_CODE (op))
 	{
@@ -2023,6 +2043,42 @@ msp430_print_operand (FILE * file, rtx op, int letter)
 	  gcc_unreachable ();
 	}
       break;
+    case 'C':
+      switch (GET_CODE (op))
+	{
+	case MEM:
+	  op = adjust_address (op, Pmode, 3);
+	  break;
+	case REG:
+	  op = gen_rtx_REG (Pmode, REGNO (op) + 2);
+	  break;
+	case CONST_INT:
+	  op = GEN_INT (INTVAL (op) >> 32);
+	  letter = 0;
+	  break;
+	default:
+	  /* If you get here, figure out a test case :-) */
+	  gcc_unreachable ();
+	}
+      break;
+    case 'D':
+      switch (GET_CODE (op))
+	{
+	case MEM:
+	  op = adjust_address (op, Pmode, 4);
+	  break;
+	case REG:
+	  op = gen_rtx_REG (Pmode, REGNO (op) + 3);
+	  break;
+	case CONST_INT:
+	  op = GEN_INT (INTVAL (op) >> 48);
+	  letter = 0;
+	  break;
+	default:
+	  /* If you get here, figure out a test case :-) */
+	  gcc_unreachable ();
+	}
+      break;
 
     case 'X':
       /* This is used to turn, for example, an ADD opcode into an ADDX
@@ -2039,7 +2095,7 @@ msp430_print_operand (FILE * file, rtx op, int letter)
 	fprintf (file, "X");
       return;
 
-    case 'A':
+    case 'Q':
       /* Likewise, for BR -> BRA.  */
       if (TARGET_LARGE)
 	fprintf (file, "A");
@@ -2053,6 +2109,12 @@ msp430_print_operand (FILE * file, rtx op, int letter)
 	       msp430_initial_elimination_offset (ARG_POINTER_REGNUM, STACK_POINTER_REGNUM)
 	        - 2);
       return;
+
+    case 0:
+      break;
+    default:
+      output_operand_lossage ("invalid operand prefix");
+      return;
     }
 
   switch (GET_CODE (op))

gcc/config/msp430/msp430.md

@@ -87,7 +87,7 @@
   [(unspec_volatile [(match_operand 0 "register_operand" "r")
 		     (match_operand 1 "immediate_operand" "n")] UNS_PUSHM)]
   ""
-  "PUSHM%B0\t%1, %0"
+  "PUSHM%b0\t%1, %0"
   )
 
 (define_insn "pop"
@@ -105,7 +105,7 @@
   )
 
 ;; This is nasty.  Operand0 is bogus.  It is only there so that we can get a
-;; mode for the %B0 to work.  We should use operand1 for this, but that does
+;; mode for the %b0 to work.  We should use operand1 for this, but that does
 ;; not have a mode.
 ;; 
 ;; Operand1 is actually a register, but we cannot accept (REG...) because the
@@ -115,7 +115,7 @@
 ;; because that is the only operator that will omit the # prefix to an
 ;; integer value.  Unfortunately it also inverts the integer value, so we
 ;; have pre-invert it when generating this insn.  (We could of course add a
-;; new operator, eg %D, just for this pattern...)
+;; new operator, eg %J, just for this pattern...)
 ;;
 ;; The pushm pattern does not have this problem because of all of the
 ;; frame info cruft attached to it, so cprop_hardreg leaves it alone.
@@ -124,7 +124,7 @@
 		     (match_operand 1 "immediate_operand" "i")
 		     (match_operand 2 "immediate_operand" "i")] UNS_POPM)]
   ""
-  "POPM%B0\t%2, r%I1"
+  "POPM%b0\t%2, r%I1"
   )
 
 ;; The next two patterns are here to support a "feature" of how GCC implements
@@ -215,9 +215,9 @@
 	(match_operand:PSI 1 "msp_general_operand" "riYa,r,rmi"))]
   ""
   "@
-  MOV%A0\t%1, %0
-  MOV%A0\t%1, %0
-  MOV%X0.%A0\t%1, %0")
+  MOV%Q0\t%1, %0
+  MOV%Q0\t%1, %0
+  MOV%X0.%Q0\t%1, %0")
 
 ; This pattern is identical to the truncsipsi2 pattern except
 ; that it uses a SUBREG instead of a TRUNC.  It is needed in
@@ -316,7 +316,7 @@
 ; that are not single_set() very well.
 
 (define_insn "addhi3_cy"
-  [(set (match_operand:HI 0 "msp_nonimmediate_operand" "=r,rm")
+  [(set (match_operand:HI          0 "msp_nonimmediate_operand" "=r,rm")
 	(plus:HI (match_operand:HI 1 "msp_nonimmediate_operand" "%0,0")
 		 (match_operand:HI 2 "msp_general_operand" "r,rm")))
    (set (reg:BI CARRY)
@@ -347,7 +347,7 @@
 
 ; Version of addhi that adds the carry, for SImode adds.
 (define_insn "addchi4_cy"
-  [(set (match_operand:HI 0 "msp_nonimmediate_operand" "=r,rm")
+  [(set (match_operand:HI                   0 "msp_nonimmediate_operand" "=r,rm")
 	(plus:HI (plus:HI (match_operand:HI 1 "msp_nonimmediate_operand" "%0,0")
 			  (match_operand:HI 2 "msp_general_operand" "ri,rmi"))
 		 (zero_extend:HI (reg:BI CARRY))))
@@ -362,7 +362,7 @@
 ; so that gcc knows when it can and can't optimize away the two
 ; halves.
 (define_split
-  [(set (match_operand:SI 0 "msp430_nonsubreg_operand")
+  [(set (match_operand:SI          0 "msp430_nonsubreg_operand")
 	(plus:SI (match_operand:SI 1 "nonimmediate_operand")
 		 (match_operand:SI 2 "general_operand")))
    ]
@@ -452,8 +452,8 @@
 		 (match_operand 2 "msp430_inv_constgen_operator" "n,n")))]
   ""
   "@
-   BIC%x0%B0\t#%I2, %0
-   BIC%X0%B0\t#%I2, %0"
+   BIC%x0%b0\t#%I2, %0
+   BIC%X0%b0\t#%I2, %0"
 )
 
 (define_insn "bic<mode>3"
@@ -462,8 +462,8 @@
 		 (match_operand:QHI          2 "msp_nonimmediate_operand"  "0,0")))]
   ""
   "@
-   BIC%x0%B0\t%1, %0
-   BIC%X0%B0\t%1, %0"
+   BIC%x0%b0\t%1, %0
+   BIC%X0%b0\t%1, %0"
 )
 
 (define_insn "and<mode>3"
@@ -472,42 +472,42 @@
 		 (match_operand:QHI 2 "msp_general_operand" "riYs,rmi")))]
   ""
   "@
-   AND%x0%B0\t%2, %0
-   AND%X0%B0\t%2, %0"
+   AND%x0%b0\t%2, %0
+   AND%X0%b0\t%2, %0"
 )
 
 (define_insn "ior<mode>3"
-  [(set (match_operand:QHI 0 "msp_nonimmediate_operand" "=rYs,rm")
+  [(set (match_operand:QHI          0 "msp_nonimmediate_operand" "=rYs,rm")
 	(ior:QHI (match_operand:QHI 1 "msp_nonimmediate_operand" "%0,0")
 		 (match_operand:QHI 2 "msp_general_operand" "riYs,rmi")))]
   ""
   "@
-   BIS%x0%B0\t%2, %0
-   BIS%X0%B0\t%2, %0"
+   BIS%x0%b0\t%2, %0
+   BIS%X0%b0\t%2, %0"
 )
 
 (define_insn "xor<mode>3"
-  [(set (match_operand:QHI 0 "msp_nonimmediate_operand" "=rYs,rm")
+  [(set (match_operand:QHI          0 "msp_nonimmediate_operand" "=rYs,rm")
 	(xor:QHI (match_operand:QHI 1 "msp_nonimmediate_operand" "%0,0")
 		 (match_operand:QHI 2 "msp_general_operand" "riYs,rmi")))]
   ""
   "@
-   XOR%x0%B0\t%2, %0
-   XOR%X0%B0\t%2, %0"
+   XOR%x0%b0\t%2, %0
+   XOR%X0%b0\t%2, %0"
 )
 
 ;; Macro : XOR #~0, %0
 (define_insn "one_cmpl<mode>2"
-  [(set (match_operand:QHI 0 "msp_nonimmediate_operand" "=rYs,m")
+  [(set (match_operand:QHI          0 "msp_nonimmediate_operand" "=rYs,m")
 	(not:QHI (match_operand:QHI 1 "msp_nonimmediate_operand" "0,0")))]
   ""
   "@
-   INV%x0%B0\t%0
-   INV%X0%B0\t%0"
+   INV%x0%b0\t%0
+   INV%X0%b0\t%0"
 )
 
 (define_insn "extendqihi2"
-  [(set (match_operand:HI 0 "msp_nonimmediate_operand" "=rYs,m")
+  [(set (match_operand:HI                 0 "msp_nonimmediate_operand" "=rYs,m")
 	(sign_extend:HI (match_operand:QI 1 "msp_nonimmediate_operand" "0,0")))]
   ""
   "@
@@ -920,7 +920,7 @@
 (define_insn "epilogue_helper"
   [(unspec_volatile [(match_operand 0 "immediate_operand" "i")] UNS_EPILOGUE_HELPER)]
   ""
-  "BR%A0\t#__mspabi_func_epilog_%D0"
+  "BR%Q0\t#__mspabi_func_epilog_%0"
   )
 
 
@@ -956,7 +956,7 @@
   [(call (mem:HI (match_operand 0 "general_operand" "rmi"))
 	 (match_operand 1 ""))]
   ""
-  "CALL%A0\t%0"
+  "CALL%Q0\t%0"
 )
 
 (define_expand "call_value"
@@ -972,7 +972,7 @@
 	(call (mem:HI (match_operand 1 "general_operand" "rmi"))
 	      (match_operand 2 "")))]
   ""
-  "CALL%A0\t%1"
+  "CALL%Q0\t%1"
 )
 
 (define_insn "msp_return"
@@ -1010,7 +1010,7 @@
   [(set (pc)
 	(label_ref (match_operand 0 "" "")))]
   ""
-  "BR%A0\t#%l0"
+  "BR%Q0\t#%l0"
 )
 
 ;; FIXME: GCC currently (8/feb/2013) cannot handle symbol_refs
@@ -1019,7 +1019,7 @@
   [(set (pc)
 	(match_operand 0 "nonimmediate_operand" "rYl"))]
   ""
-  "BR%A0\t%0"
+  "BR%Q0\t%0"
 )
 
 ;;------------------------------------------------------------
@@ -1049,7 +1049,7 @@
    ]
   ""
   "@
-  CMP%A0\t%2, %1 { J%0\t%l3
+  CMP%Q0\t%2, %1 { J%0\t%l3
   CMPX.A\t%2, %1 { J%0\t%l3
   CMPX.A\t%2, %1 { J%0\t%l3"
   )
@@ -1095,7 +1095,7 @@
    ]
   ""
   "@
-  CMP%A0\t%1, %2 { J%R0\t%l3
+  CMP%Q0\t%1, %2 { J%R0\t%l3
   CMPX.A\t%1, %2 { J%R0\t%l3
   CMPX.A\t%1, %2 { J%R0\t%l3"
   )
@@ -1141,8 +1141,8 @@
    ]
   ""
   "@
-   BIT%x0%B0\t%1, %0 { JNE\t%l2
-   BIT%X0%B0\t%1, %0 { JNE\t%l2"
+   BIT%x0%b0\t%1, %0 { JNE\t%l2
+   BIT%X0%b0\t%1, %0 { JNE\t%l2"
   )
 
 (define_insn "*bitbranch<mode>4"
@@ -1155,7 +1155,7 @@
    (clobber (reg:BI CARRY))
    ]
   ""
-  "BIT%x0%X0%B0\t%1, %0 { JEQ\t%l2"
+  "BIT%x0%X0%b0\t%1, %0 { JEQ\t%l2"
   )
 
 (define_insn "*bitbranch<mode>4"
@@ -1168,7 +1168,7 @@
    (clobber (reg:BI CARRY))
    ]
   ""
-  "BIT%X0%B0\t%1, %0 { JNE\t%l2"
+  "BIT%X0%b0\t%1, %0 { JNE\t%l2"
   )
 
 (define_insn "*bitbranch<mode>4"
@@ -1181,7 +1181,7 @@
    (clobber (reg:BI CARRY))
    ]
   ""
-  "BIT%X0%B0\t%1, %0 { JEQ\t%l2"
+  "BIT%X0%b0\t%1, %0 { JEQ\t%l2"
   )
 
 ;;------------------------------------------------------------
@@ -1199,8 +1199,8 @@
    ]
   ""
   "@
-   BIT%x0%B0\t%p1, %0 { JNE\t%l2
-   BIT%X0%B0\t%p1, %0 { JNE\t%l2"
+   BIT%x0%b0\t%p1, %0 { JNE\t%l2
+   BIT%X0%b0\t%p1, %0 { JNE\t%l2"
   )
 
 (define_insn "*bitbranch<mode>4_z"
@@ -1214,7 +1214,7 @@
    (clobber (reg:BI CARRY))
    ]
   ""
-  "BIT%x0%X0%B0\t%p1, %0 { JEQ\t%l2"
+  "BIT%x0%X0%b0\t%p1, %0 { JEQ\t%l2"
   )
 
 (define_insn "*bitbranch<mode>4_z"
@@ -1228,7 +1228,7 @@
    (clobber (reg:BI CARRY))
    ]
   ""
-  "BIT%X0%B0\t%p1, %0 { JNE\t%l2"
+  "BIT%X0%b0\t%p1, %0 { JNE\t%l2"
   )
 
 (define_insn "*bitbranch<mode>4_z"
@@ -1242,7 +1242,7 @@
    (clobber (reg:BI CARRY))
    ]
   ""
-  "BIT%X0%B0\t%p1, %0 { JEQ\t%l2"
+  "BIT%X0%b0\t%p1, %0 { JEQ\t%l2"
   )
 
 ;;------------------------------------------------------------