Skip to content

R
riscv-gcc-1
Commit 37416b69 by Michael Meissner Committed by Michael Meissner
Options

re PR target/80510 (Optimize Power7/power8 Altivec load/stores) 

[gcc]
2017-06-23  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/80510
	* config/rs6000/rs6000.md (ALTIVEC_DFORM): Do not allow DImode in
	32-bit, since indexed is not valid for DImode.
	(mov<mode>_hardfloat32): Reorder ISA 2.07 load/stores before ISA
	3.0 d-form load/stores to be the same as mov<mode>_hardfloat64.
	(define_peephole2 for Altivec d-form load): Add 32-bit support.
	(define_peephole2 for Altivec d-form store): Likewise.

[gcc/testsuite]
2017-06-23  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/80510
	* gcc.target/powerpc/pr80510-1.c: Allow test to run on 32-bit.
	* gcc.target/powerpc/pr80510-2.c: Likewise.

From-SVN: r249607
parent 9761349c
Showing with 33 additions and 21 deletions
gcc/ChangeLog
2017-06-23 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/80510
* config/rs6000/rs6000.md (ALTIVEC_DFORM): Do not allow DImode in
32-bit, since indexed is not valid for DImode.
(mov<mode>_hardfloat32): Reorder ISA 2.07 load/stores before ISA
3.0 d-form load/stores to be the same as mov<mode>_hardfloat64.
(define_peephole2 for Altivec d-form load): Add 32-bit support.
(define_peephole2 for Altivec d-form store): Likewise.
PR ipa/81185
* multiple_target.c (create_dispatcher_calls): Only create the
dispatcher call if the function is the default clone of a
......
gcc/config/rs6000/rs6000.md
......@@ -690,7 +690,9 @@
;; Iterator to optimize the following cases:
;; D-form load to FPR register & move to Altivec register
;; Move Altivec register to FPR register and store
(define_mode_iterator ALTIVEC_DFORM [DI DF SF])
(define_mode_iterator ALTIVEC_DFORM [DF
SF
(DI "TARGET_POWERPC64")])
;; Start with fixed-point load and store insns. Here we put only the more
......@@ -7391,8 +7393,8 @@
;; except for 0.0 which can be created on VSX with an xor instruction.
(define_insn "*mov<mode>_hardfloat32"
[(set (match_operand:FMOVE64 0 "nonimmediate_operand" "=m,d,d,<f64_av>,Z,<f64_p9>,wY,<f64_vsx>,<f64_vsx>,!r,Y,r,!r")
(match_operand:FMOVE64 1 "input_operand" "d,m,d,Z,<f64_av>,wY,<f64_p9>,<f64_vsx>,<zero_fp>,<zero_fp>,r,Y,r"))]
[(set (match_operand:FMOVE64 0 "nonimmediate_operand" "=m,d,d,<f64_p9>,wY,<f64_av>,Z,<f64_vsx>,<f64_vsx>,!r,Y,r,!r")
(match_operand:FMOVE64 1 "input_operand" "d,m,d,wY,<f64_p9>,Z,<f64_av>,<f64_vsx>,<zero_fp>,<zero_fp>,r,Y,r"))]
"! TARGET_POWERPC64 && TARGET_HARD_FLOAT && TARGET_DOUBLE_FLOAT
&& (gpc_reg_operand (operands[0], <MODE>mode)
|| gpc_reg_operand (operands[1], <MODE>mode))"
......@@ -7400,10 +7402,10 @@
stfd%U0%X0 %1,%0
lfd%U1%X1 %0,%1
fmr %0,%1
lxsd%U1x %x0,%y1
stxsd%U0x %x1,%y0
lxsd %0,%1
stxsd %1,%0
lxsd%U1x %x0,%y1
stxsd%U0x %x1,%y0
xxlor %x0,%x1,%x1
xxlxor %x0,%x0,%x0
#
......@@ -13967,13 +13969,13 @@
;; LXSDX 32,3,9
(define_peephole2
[(match_scratch:DI 0 "b")
[(match_scratch:P 0 "b")
(set (match_operand:ALTIVEC_DFORM 1 "fpr_reg_operand")
(match_operand:ALTIVEC_DFORM 2 "simple_offsettable_mem_operand"))
(set (match_operand:ALTIVEC_DFORM 3 "altivec_register_operand")
(match_dup 1))]
"TARGET_VSX && TARGET_POWERPC64 && TARGET_UPPER_REGS_<MODE>
&& !TARGET_P9_DFORM_SCALAR && peep2_reg_dead_p (2, operands[1])"
"TARGET_VSX && TARGET_UPPER_REGS_<MODE> && !TARGET_P9_DFORM_SCALAR
&& peep2_reg_dead_p (2, operands[1])"
[(set (match_dup 0)
(match_dup 4))
(set (match_dup 3)
......@@ -13988,7 +13990,7 @@
add_op0 = XEXP (addr, 0);
add_op1 = XEXP (addr, 1);
gcc_assert (REG_P (add_op0));
new_addr = gen_rtx_PLUS (DImode, add_op0, tmp_reg);
new_addr = gen_rtx_PLUS (Pmode, add_op0, tmp_reg);
operands[4] = add_op1;
operands[5] = change_address (mem, <MODE>mode, new_addr);
......@@ -14004,13 +14006,13 @@
;; STXSDX 32,3,9
(define_peephole2
[(match_scratch:DI 0 "b")
[(match_scratch:P 0 "b")
(set (match_operand:ALTIVEC_DFORM 1 "fpr_reg_operand")
(match_operand:ALTIVEC_DFORM 2 "altivec_register_operand"))
(set (match_operand:ALTIVEC_DFORM 3 "simple_offsettable_mem_operand")
(match_dup 1))]
"TARGET_VSX && TARGET_POWERPC64 && TARGET_UPPER_REGS_<MODE>
&& !TARGET_P9_DFORM_SCALAR && peep2_reg_dead_p (2, operands[1])"
"TARGET_VSX && TARGET_UPPER_REGS_<MODE> && !TARGET_P9_DFORM_SCALAR
&& peep2_reg_dead_p (2, operands[1])"
[(set (match_dup 0)
(match_dup 4))
(set (match_dup 5)
......@@ -14025,7 +14027,7 @@
add_op0 = XEXP (addr, 0);
add_op1 = XEXP (addr, 1);
gcc_assert (REG_P (add_op0));
new_addr = gen_rtx_PLUS (DImode, add_op0, tmp_reg);
new_addr = gen_rtx_PLUS (Pmode, add_op0, tmp_reg);
operands[4] = add_op1;
operands[5] = change_address (mem, <MODE>mode, new_addr);
......
gcc/testsuite/ChangeLog
2017-06-23 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/80510
* gcc.target/powerpc/pr80510-1.c: Allow test to run on 32-bit.
* gcc.target/powerpc/pr80510-2.c: Likewise.
2017-06-22 Jeff Law <law@redhat.com>
* gcc.c-torture/compile/stack-check-1.c: Require "untyped_assembly".
......
gcc/testsuite/gcc.target/powerpc/pr80510-1.c
/* { dg-do compile { target { powerpc*-*-* && lp64 } } } */
/* { dg-do compile { target { powerpc*-*-* } } } */
/* { dg-skip-if "" { powerpc*-*-darwin* } } */
/* { dg-require-effective-target powerpc_vsx_ok } */
/* { dg-skip-if "do not override -mcpu" { powerpc*-*-* } { "-mcpu=*" } { "-mcpu=power7" } } */
......@@ -6,9 +6,7 @@
/* Make sure that STXSDX is generated for double scalars in Altivec registers
on power7 instead of moving the value to a FPR register and doing a X-FORM
store.
32-bit currently does not have support for STXSDX in the mov{df,dd} patterns. */
store. */
#ifndef TYPE
#define TYPE double
......
gcc/testsuite/gcc.target/powerpc/pr80510-2.c
/* { dg-do compile { target { powerpc*-*-* && lp64 } } } */
/* { dg-do compile { target { powerpc*-*-* } } } */
/* { dg-skip-if "" { powerpc*-*-darwin* } } */
/* { dg-require-effective-target powerpc_p8vector_ok } */
/* { dg-skip-if "do not override -mcpu" { powerpc*-*-* } { "-mcpu=*" } { "-mcpu=power8" } } */
......@@ -6,9 +6,7 @@
/* Make sure that STXSSPX is generated for float scalars in Altivec registers
on power7 instead of moving the value to a FPR register and doing a X-FORM
store.
32-bit currently does not have support for STXSSPX in the mov{sf,sd} patterns. */
store. */
#ifndef TYPE
#define TYPE float
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment