root.texi, [...]: Remove non-historical references to egcs/EGCS.

2000-11-05  Toon Moene  <toon@moene.indiv.nluug.nl>

	* root.texi, news.texi, g77install.texi, g77.texi, bugs.texi:
	Remove non-historical references to egcs/EGCS.

From-SVN: r37266

gcc/f/ChangeLog

+2000-11-05  Toon Moene  <toon@moene.indiv.nluug.nl>
+
+	* root.texi, news.texi, g77install.texi, g77.texi, bugs.texi:
+	Remove non-historical references to egcs/EGCS.
+
 2000-11-05  Joseph S. Myers  <jsm28@cam.ac.uk>
 
 	* Make-lang.in: Remove f77.distdir and f/INSTALL.

gcc/f/bugs.texi

@@ -77,7 +77,7 @@ most consistent with the @code{g77} product in that version.
 
 An online, ``live'' version of this document
 (derived directly from the mainline, development version
-of @code{g77} within @code{egcs})
+of @code{g77} within @code{gcc})
 is available via
 @uref{http://www.gnu.org/software/gcc/onlinedocs/g77_bugs.html}.
 Follow the ``Known Bugs'' link.

gcc/f/g77.texi

@@ -751,7 +751,7 @@ So far, this has resulted in the three, somewhat
 experimental, options added by @code{g77} to the @code{gcc}
 compiler and its back end.
 
-(These, in turn, have made their way into the @code{egcs}
+(These, in turn, had made their way into the @code{egcs}
 version of the compiler, and do not exist in @code{gcc}
 version 2.8 or versions of @code{g77} based on that version
 of @code{gcc}.)
@@ -1658,7 +1658,7 @@ This option is obsolete in @code{egcs}
 as of version 1.1.
 The effect is instead achieved
 by the @code{lang_init_options} routine
-in @file{egcs/gcc/f/com.c}.
+in @file{gcc/gcc/f/com.c}.
 
 @cindex consistency checks
 @cindex internal consistency checks
@@ -10235,13 +10235,9 @@ introduced in version 0.5.20 and
 were withdrawn as of @code{g77} version 0.5.23
 due to their not being supported by @code{gcc} version 2.8.
 
-These options, which control the assumptions regarding aliasing
+These options control the assumptions regarding aliasing
 (overlapping) of writes and reads to main memory (core) made
-by the @code{gcc} back end,
-might well be added back (in some form) in a future version
-of @code{gcc}.
-
-However, these options @emph{are} supported by @code{egcs}.
+by the @code{gcc} back end.
 
 The information below still is useful, but applies to
 only those versions of @code{g77} that support the
@@ -13951,8 +13947,8 @@ How to do this depends on the version of @code{g77}:
 
 @table @code
 @item G77 0.5.24 (EGCS 1.1)
-@itemx G77 0.5.25 (EGCS 1.2)
-Change the @code{lang_init_options} routine in @file{egcs/gcc/f/com.c}.
+@itemx G77 0.5.25 (EGCS 1.2 - which became GCC 2.95)
+Change the @code{lang_init_options} routine in @file{gcc/gcc/f/com.c}.
 
 (Note that these versions of @code{g77}
 perform internal consistency checking automatically
@@ -15061,7 +15057,7 @@ the problem by editing $@{srcdir@}/proj.c, and what else to do.
 this problem,
 which occurs only in releases of @code{g77}
 based on @code{gcc}.
-(It does not occur in @code{egcs}.)
+(It did not occur in @code{egcs}.)
 
 On AIX 4.1, @code{g77} might not build with the native (non-GNU) tools
 due to a linker bug in coping with the @samp{-bbigtoc} option which

gcc/f/g77install.texi

@@ -51,10 +51,6 @@ The following information describes how to install @code{g77}.
 
 @clear OMIT-FSF-G77
 
-@ifset EGCS-G77
-@set OMIT-FSF-G77
-@end ifset
-
 @ifset GCC-G77
 @set OMIT-FSF-G77
 @end ifset
@@ -593,7 +589,6 @@ be fixed in a future version of @code{gcc}.
 @cindex AIX
 A linker bug on some versions of AIX 4.1 might prevent building
 when @code{g77} is built within @code{gcc}.
-It might also occur when building within @code{egcs}.
 @ifset DOC-G77
 @xref{LINKFAIL}.
 @end ifset

gcc/f/news.texi

@@ -97,7 +97,9 @@ Note that two variants of @code{g77} are tracked below.
 The @code{egcs} variant is described vis-a-vis
 previous versions of @code{egcs} and/or
 an official FSF version,
-as appropriate.
+as appropriate.  Note that all such variants are now
+obsolete - the information is retained here only for 
+its historical value.
 
 Therefore, @code{egcs} versions sometimes have multiple listings
 to help clarify how they differ from other versions,
@@ -144,7 +146,7 @@ of news about previous @code{g77} versions up-to-date.
 @ifclear USERVISONLY
 An online, ``live'' version of this document
 (derived directly from the mainline, development version
-of @code{g77} within @code{egcs})
+of @code{g77} within @code{gcc})
 is available at
 @uref{http://www.gnu.org/software/gcc/onlinedocs/g77_news.html}.
 @end ifclear

gcc/f/root.texi

 @c DEVELOPMENT is set to indicate an in-development version,
 @c as compared to a release version.  When making a release
-@c (e.g. a release branch in the CVS repository for egcs),
+@c (e.g. a release branch in the CVS repository for gcc),
 @c clear this and set the version information correctly.
 @set DEVELOPMENT
 @set version-g77 0.5.25
-@set version-egcs 1.2
-@set version-gcc 2.95
+@set version-gcc 2.97
 
 @c GCC-G77 indicates this is the GCC (2.95 or later) version of g77.
 @set GCC-G77
@@ -18,8 +17,8 @@
 
 @set email-general gcc@@gcc.gnu.org
 @set email-bugs gcc-bugs@@gcc.gnu.org or bug-gcc@@gnu.org
-@set path-g77 egcs/gcc/f
-@set path-libf2c egcs/libf2c
+@set path-g77 gcc/gcc/f
+@set path-libf2c gcc/libf2c
 
 @ifset GCC-G77
 @set which-g77 GCC-@value{version-gcc}