Skip to content

R
riscv-gcc-1
Commit 2a15d344 by Richard Henderson Committed by Richard Henderson
Options

c-common.c (cpp_define_data_format): Remove __GCC_LITTLE_ENDIAN__... 

        * c-common.c (cpp_define_data_format): Remove __GCC_LITTLE_ENDIAN__,
        __GCC_BIG_ENDIAN__, __TARGET_BITS_ORDER__, __TARGET_BYTES_ORDER__,
        __TARGET_INT_WORDS_ORDER__, __TARGET_FLOAT_WORDS_ORDER__,
        __TARGET_USES_VAX_F_FLOAT__, __TARGET_USES_VAX_D_FLOAT__,
        __TARGET_USES_VAX_G_FLOAT__, __TARGET_USES_VAX_H_FLOAT__.
        * doc/cpp.texi: Don't document them.

From-SVN: r57391
parent 3fdacdf9
Showing with 10 additions and 90 deletions
gcc/ChangeLog
2002-09-21 Richard Henderson <rth@redhat.com>
* c-common.c (cpp_define_data_format): Remove __GCC_LITTLE_ENDIAN__,
__GCC_BIG_ENDIAN__, __TARGET_BITS_ORDER__, __TARGET_BYTES_ORDER__,
__TARGET_INT_WORDS_ORDER__, __TARGET_FLOAT_WORDS_ORDER__,
__TARGET_USES_VAX_F_FLOAT__, __TARGET_USES_VAX_D_FLOAT__,
__TARGET_USES_VAX_G_FLOAT__, __TARGET_USES_VAX_H_FLOAT__.
* doc/cpp.texi: Don't document them.
2002-09-21 Richard Henderson <rth@redhat.com>
* c-common.c (builtin_define_float_constants): Use real_format
to get the floating-point parameters.
gcc/c-common.c
......@@ -4693,10 +4693,6 @@ cpp_define_data_format (pfile)
{
const char *format;
/* Define endianness enumeration values. */
cpp_define (pfile, "__GCC_LITTLE_ENDIAN__=0");
cpp_define (pfile, "__GCC_BIG_ENDIAN__=1");
/* Define supported floating-point format enumeration values. */
cpp_define (pfile, "__UNKNOWN_FORMAT__=0");
cpp_define (pfile, "__IEEE_FORMAT__=1");
......@@ -4704,76 +4700,27 @@ cpp_define_data_format (pfile)
cpp_define (pfile, "__C4X_FORMAT__=3");
cpp_define (pfile, "__VAX_FORMAT__=4");
/* Define target endianness:
- bit order
- byte order
- word order in an integer that spans a multi-word
- word order in a floating-poing that spans a multi-word */
if (BITS_BIG_ENDIAN)
cpp_define (pfile, "__TARGET_BITS_ORDER__=__GCC_BIG_ENDIAN__");
else
cpp_define (pfile, "__TARGET_BITS_ORDER__=__GCC_BIG_ENDIAN__");
if (BYTES_BIG_ENDIAN)
cpp_define (pfile, "__TARGET_BYTES_ORDER__=__GCC_BIG_ENDIAN__");
else
cpp_define (pfile, "__TARGET_BYTES_ORDER__=__GCC_LITTLE_ENDIAN__");
/* Define words order in a multi-word integer. */
if (WORDS_BIG_ENDIAN)
cpp_define (pfile, "__TARGET_INT_WORDS_ORDER__=__GCC_BIG_ENDIAN__");
else
cpp_define (pfile, "__TARGET_INT_WORDS_ORDER__=__GCC_LITTLE_ENDIAN__");
/* Define words order in a multi-word floating point. */
if (FLOAT_WORDS_BIG_ENDIAN)
cpp_define (pfile, "__TARGET_FLOAT_WORDS_ORDER__=__GCC_BIG_ENDIAN__");
else
cpp_define (pfile, "__TARGET_FLOAT_WORDS_ORDER__=__GCC_LITTLE_ENDIAN__");
switch (TARGET_FLOAT_FORMAT)
{
case UNKNOWN_FLOAT_FORMAT:
format = "__UNKNOWN_FORMAT__";
break;
case IEEE_FLOAT_FORMAT:
format = "__IEEE_FORMAT__";
break;
case VAX_FLOAT_FORMAT:
format = "__VAX_FORMAT__";
cpp_define (pfile, "__TARGET_USES_VAX_F_FLOAT__=1");
#ifdef TARGET_G_FLOAT
if (TARGET_G_FLOAT)
{
cpp_define (pfile, "__TARGET_USES_VAX_D_FLOAT__=0");
cpp_define (pfile, "__TARGET_USES_VAX_G_FLOAT__=1");
}
else
{
cpp_define (pfile, "__TARGET_USES_VAX_D_FLOAT__=1");
cpp_define (pfile, "__TARGET_USES_VAX_G_FLOAT__=0");
}
#endif
cpp_define (pfile, "__TARGET_USES_VAX_H_FLOAT__=1");
break;
case IBM_FLOAT_FORMAT:
format = "__IBM_FORMAT__";
break;
case C4X_FLOAT_FORMAT:
format = "__C4X_FORMAT__";
break;
default:
abort();
}
if (TARGET_FLOAT_FORMAT != VAX_FLOAT_FORMAT)
{
cpp_define (pfile, "__TARGET_USES_VAX_F_FLOAT__=0");
cpp_define (pfile, "__TARGET_USES_VAX_D_FLOAT__=0");
cpp_define (pfile, "__TARGET_USES_VAX_G_FLOAT__=0");
cpp_define (pfile, "__TARGET_USES_VAX_H_FLOAT__=0");
}
builtin_define_with_value ("__GCC_FLOAT_FORMAT__", format, 0);
}
......
gcc/doc/cpp.texi
......@@ -2033,47 +2033,11 @@ This macro is defined, with value 1, if (and only if) the NeXT runtime
runtime is used, this macro is not defined, so that you can use this
macro to determine which runtime (NeXT or GNU) is being used.
@item __TARGET_BITS_ORDER__
This macro describes the target's bits order in a byte. Its value is
@code{__GCC_LITTLE_ENDIAN__} or @code{__GCC_BIG_ENDIAN__}.
@item __TARGET_BYTES_ORDER__
This macro is defined with value @code{__GCC_LITTLE_ENDIAN__} or
@code{__GCC_BIG_ENDIAN__} if the target's bytes order within a word
is little-endian or big-endian, respectively.
@item __TARGET_INT_WORDS_ORDER__
This macro is defined with value @code{__GCC_LITTLE_ENDIAN__} or
@code{__GCC_BIG_ENDIAN__} if the target's words order within a
multi-word integer datum is little-endian or big-endian, respectively.
@item __TARGET_FLOAT_WORDS_ORDER__
This macro is defined with value @code{__GCC_LITTLE_ENDIAN__} or
@code{__GCC_BIG_ENDIAN__} if the target's words order within a
multi-word floating-point datum is little-endian or big-endian, respectively.
@item __TARGET_FLOAT_FORMAT__
This macro is defined to describe the floating-point format used by the
target. It has value in the set comprised of:
@code{__UNKNOWN_FORMAT__}, @code{__IEEE_FORMAT__},
@code{__IBM_FORMAT__}, @code{__C4X_FORMAT__} and @code{__VAX_FORMAT__}.
@item __TARGET_USES_VAX_F_FLOAT__
This macro is defined with value 1 if the target uses the VAX F-format
for the single precision floating-point data type; else if has value 0.
@item __TARGET_USES_VAX_D_FLOAT__
@item __TARGET_USES_VAX_G_FLOAT__
These macros are always defined, with values 0 or 1. If
@code{__TARGET_FLOAT_FORMAT__} is @code{__VAX_FORMAT__} then they have
mutually exclusive values; else both have value 0. Non-zero
@code{__TARGET_USES_VAX_D_FLOAT__} means the target uses the VAX
D-format for the double precision floating-point data type; non-zero
@code{__TARGET_USES_VAX_G_FLOAT__} means the VAX G-format is used.
@item __TARGET_USES_VAX_H_FLOAT__
When non-zero, the target uses the VAX H-format for the extended
precision floating-point data type.
@end table
@node System-specific Predefined Macros
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment