Skip to content

R
riscv-gcc-1
Commit 17caeff2 by Joseph Myers Committed by Joseph Myers
Options

rs6000-c.c (rs6000_cpu_cpp_builtins): Define _SOFT_DOUBLE if doubles use software floating-point. 

gcc:
	* config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): Define
	_SOFT_DOUBLE if doubles use software floating-point.
	* config/rs6000/libgcc-ppc-glibc.ver: Export additional long
	double functions if _SOFT_DOUBLE, not _SOFT_FLOAT.
	* config/rs6000/darwin-ldouble.c: Also compile functions for
	hard-float without FPRs.  Use fmsub function for all __NO_FPRS__
	cases.  Compile extra functions if _SOFT_DOUBLE, not _SOFT_FLOAT.
	* config/rs6000/linuxspe.h (SUBSUBTARGET_OVERRIDE_OPTIONS): Remove
	commented-out long double override.
	(CPP_LONGDOUBLE_DEFAULT_SPEC): Likewise.
	* config/rs6000/eabispe.h: Likewise.
	* config/rs6000/rs6000.c (rs6000_override_options): Don't override
	long double for non-SPE.
	(rs6000_handle_option): Likewise.
	(invalid_e500_subreg): Disallow more subregs involding DImode,
	DFmode, TImode or TFmode.
	(rs6000_legitimate_offset_address_p): Check TFmode offsets for
	E500 double.
	(legitimate_lo_sum_address_p): Also check for TFmode for E500
	double.
	(rs6000_legitimize_address): Also handle TFmode for E500 double.
	(rs6000_legitimize_reload_address): Also handle TFmode for E500
	double.
	(rs6000_legitimate_address): Also check for TFmode for E500
	double.
	(rs6000_emit_move): Use DFmode subregs of TFmode for E500 double.
	(spe_build_register_parallel): Handle TFmode and TCmode.
	(rs6000_spe_function_arg): Handle TFmode and TCmode for E500
	double.
	(function_arg): Handle TFmode and TCmode for E500 double.
	(rs6000_init_libfuncs): Initialize extra libfuncs for soft double
	in general.
	(print_operand): Handle TFmode and TImode for %y.
	(rs6000_generate_compare): Handle TFmode comparisons for E500
	double.
	(spe_func_has_64bit_regs_p): Check for TFmode for E500 double.
	(rs6000_function_value): Handle TFmode and TCmode for E500 double.
	(rs6000_libcall_value): Handle TFmode and TCmode for E500 double.
	* config/rs6000/rs6000.h (CANNOT_CHANGE_MODE_CLASS): Check for
	TFmode for E500 double.
	* config/rs6000/rs6000.md (FP): Allow TF for E500 double.
	(floatsidf2): Enable for E500 double.
	(movtf_softfloat): Use rs6000_nonimmediate_operand.
	(extenddftf2): Change to extenddftf2_fprs.
	(extenddftf2): Call gen_spe_extenddftf2 or gen_extenddftf2_fprs
	depending on TARGET_E500_DOUBLE.
	(extendsftf2): Enable for E500 double.
	(trunctfdf2): Enable for E500 double.
	(trunctfsf2): Change to trunctfsf2_fprs.
	(trunctfsf2): Call gen_spe_trunctfsf2 or gen_trunctfsf2_fprs
	depending on TARGET_E500_DOUBLE.
	(floatsitf2): Enable for E500 double.
	(fix_trunctfsi2): Change to fix_trunctfsi2_fprs.
	(fix_trunctfsi2): Call gen_spe_fix_trunctfsi2 or
	gen_fix_trunctfsi2_fprs depending on TARGET_E500_DOUBLE.
	(negtf2): Change to negtf2_internal.
	(negtf2): New expander.
	(abstf2): Enable for E500 double.  Call gen_spe_abstf2_tst,
	gen_spe_abstf2_cmp or gen_abstf2_internal depending on
	TARGET_E500_DOUBLE and flag_unsafe_math_optimizations.
	(movdi_internal32): Use rs6000_nonimmediate_operand.
	(unnamed splitter): Likewise.
	* config/rs6000/spe.md (CMPTFEQ_GPR, TSTTFEQ_GPR, CMPTFGT_GPR,
	TSTTFGT_GPR, CMPTFLT_GPR, TSTTFLT_GPR): New unspecs.
	(SPE64TF, DITI): New mode macros.
	(frob_df_di): Change to frob_<SPE64:mode>_<DITI:mode>; allow more
	modes.
	(frob_tf_ti): New.
	(frob_<mode>_di_2): New.
	(frob_tf_di_8_2): New.
	(frob_di_df): Change to frob_di_<mode>; allow more modes.
	(frob_ti_tf): New.
	(frob_di_df_2): Change to frob_<DITI:mode>_<SPE64:mode>_2; allow
	more modes.
	(frob_ti_<mode>_8_2): New.
	(frob_ti_tf_2): New.
	(mov_si<mode>_e500_subreg0, mov_si<mode>_e500_subreg0_2,
	mov_si<mode>_e500_subreg4, mov_si<mode>_e500_subreg4_2): Allow
	TFmode.
	(mov_sitf_e500_subreg8, mov_sitf_e500_subreg8_2,
	mov_sitf_e500_subreg12, mov_sitf_e500_subreg12_2): New.
	(spe_trunctfdf2_internal1, spe_trunctfsf2, spe_extenddftf2,
	spe_fix_trunctfsi2, spe_fix_trunctfsi2_internal,
	spe_negtf2_internal, spe_abstf2_cmp, spe_abstf2_tst): New.
	(cmptfeq_gpr, tsttfeq_gpr, cmptfgt_gpr, tsttfgt_gpr, cmptflt_gpr,
	tsttflt_gp): New.

libgcc:
	* config/rs6000/t-ldbl128: Always use -mlong-double-128.

From-SVN: r121085
parent dc569621
Showing with 286 additions and 78 deletions
gcc/ChangeLog
2007-01-23 Joseph Myers <joseph@codesourcery.com>
* config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): Define
_SOFT_DOUBLE if doubles use software floating-point.
* config/rs6000/libgcc-ppc-glibc.ver: Export additional long
double functions if _SOFT_DOUBLE, not _SOFT_FLOAT.
* config/rs6000/darwin-ldouble.c: Also compile functions for
hard-float without FPRs. Use fmsub function for all __NO_FPRS__
cases. Compile extra functions if _SOFT_DOUBLE, not _SOFT_FLOAT.
* config/rs6000/linuxspe.h (SUBSUBTARGET_OVERRIDE_OPTIONS): Remove
commented-out long double override.
(CPP_LONGDOUBLE_DEFAULT_SPEC): Likewise.
* config/rs6000/eabispe.h: Likewise.
* config/rs6000/rs6000.c (rs6000_override_options): Don't override
long double for non-SPE.
(rs6000_handle_option): Likewise.
(invalid_e500_subreg): Disallow more subregs involding DImode,
DFmode, TImode or TFmode.
(rs6000_legitimate_offset_address_p): Check TFmode offsets for
E500 double.
(legitimate_lo_sum_address_p): Also check for TFmode for E500
double.
(rs6000_legitimize_address): Also handle TFmode for E500 double.
(rs6000_legitimize_reload_address): Also handle TFmode for E500
double.
(rs6000_legitimate_address): Also check for TFmode for E500
double.
(rs6000_emit_move): Use DFmode subregs of TFmode for E500 double.
(spe_build_register_parallel): Handle TFmode and TCmode.
(rs6000_spe_function_arg): Handle TFmode and TCmode for E500
double.
(function_arg): Handle TFmode and TCmode for E500 double.
(rs6000_init_libfuncs): Initialize extra libfuncs for soft double
in general.
(print_operand): Handle TFmode and TImode for %y.
(rs6000_generate_compare): Handle TFmode comparisons for E500
double.
(spe_func_has_64bit_regs_p): Check for TFmode for E500 double.
(rs6000_function_value): Handle TFmode and TCmode for E500 double.
(rs6000_libcall_value): Handle TFmode and TCmode for E500 double.
* config/rs6000/rs6000.h (CANNOT_CHANGE_MODE_CLASS): Check for
TFmode for E500 double.
* config/rs6000/rs6000.md (FP): Allow TF for E500 double.
(floatsidf2): Enable for E500 double.
(movtf_softfloat): Use rs6000_nonimmediate_operand.
(extenddftf2): Change to extenddftf2_fprs.
(extenddftf2): Call gen_spe_extenddftf2 or gen_extenddftf2_fprs
depending on TARGET_E500_DOUBLE.
(extendsftf2): Enable for E500 double.
(trunctfdf2): Enable for E500 double.
(trunctfsf2): Change to trunctfsf2_fprs.
(trunctfsf2): Call gen_spe_trunctfsf2 or gen_trunctfsf2_fprs
depending on TARGET_E500_DOUBLE.
(floatsitf2): Enable for E500 double.
(fix_trunctfsi2): Change to fix_trunctfsi2_fprs.
(fix_trunctfsi2): Call gen_spe_fix_trunctfsi2 or
gen_fix_trunctfsi2_fprs depending on TARGET_E500_DOUBLE.
(negtf2): Change to negtf2_internal.
(negtf2): New expander.
(abstf2): Enable for E500 double. Call gen_spe_abstf2_tst,
gen_spe_abstf2_cmp or gen_abstf2_internal depending on
TARGET_E500_DOUBLE and flag_unsafe_math_optimizations.
(movdi_internal32): Use rs6000_nonimmediate_operand.
(unnamed splitter): Likewise.
* config/rs6000/spe.md (CMPTFEQ_GPR, TSTTFEQ_GPR, CMPTFGT_GPR,
TSTTFGT_GPR, CMPTFLT_GPR, TSTTFLT_GPR): New unspecs.
(SPE64TF, DITI): New mode macros.
(frob_df_di): Change to frob_<SPE64:mode>_<DITI:mode>; allow more
modes.
(frob_tf_ti): New.
(frob_<mode>_di_2): New.
(frob_tf_di_8_2): New.
(frob_di_df): Change to frob_di_<mode>; allow more modes.
(frob_ti_tf): New.
(frob_di_df_2): Change to frob_<DITI:mode>_<SPE64:mode>_2; allow
more modes.
(frob_ti_<mode>_8_2): New.
(frob_ti_tf_2): New.
(mov_si<mode>_e500_subreg0, mov_si<mode>_e500_subreg0_2,
mov_si<mode>_e500_subreg4, mov_si<mode>_e500_subreg4_2): Allow
TFmode.
(mov_sitf_e500_subreg8, mov_sitf_e500_subreg8_2,
mov_sitf_e500_subreg12, mov_sitf_e500_subreg12_2): New.
(spe_trunctfdf2_internal1, spe_trunctfsf2, spe_extenddftf2,
spe_fix_trunctfsi2, spe_fix_trunctfsi2_internal,
spe_negtf2_internal, spe_abstf2_cmp, spe_abstf2_tst): New.
(cmptfeq_gpr, tsttfeq_gpr, cmptfgt_gpr, tsttfgt_gpr, cmptflt_gpr,
tsttflt_gp): New.
2007-01-23 Ian Lance Taylor <iant@google.com>
* Makefile.in (OBJS-common): Reformat, alphabetize, but put
......
gcc/config/rs6000/darwin-ldouble.c
/* 128-bit long double support routines for Darwin.
Copyright (C) 1993, 2003, 2004, 2005, 2006
Copyright (C) 1993, 2003, 2004, 2005, 2006, 2007
Free Software Foundation, Inc.
This file is part of GCC.
......@@ -49,8 +49,7 @@ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
This code currently assumes big-endian. */
#if ((!defined (__NO_FPRS__) || defined (_SOFT_FLOAT)) \
&& !defined (__LITTLE_ENDIAN__) \
#if (!defined (__LITTLE_ENDIAN__) \
&& (defined (__MACH__) || defined (__powerpc__) || defined (_AIX)))
#define fabs(x) __builtin_fabs(x)
......@@ -145,7 +144,7 @@ __gcc_qsub (double a, double b, double c, double d)
return __gcc_qadd (a, b, -c, -d);
}
#ifdef _SOFT_FLOAT
#ifdef __NO_FPRS__
static double fmsub (double, double, double);
#endif
......@@ -164,7 +163,7 @@ __gcc_qmul (double a, double b, double c, double d)
/* Sum terms of two highest orders. */
/* Use fused multiply-add to get low part of a * c. */
#ifndef _SOFT_FLOAT
#ifndef __NO_FPRS__
asm ("fmsub %0,%1,%2,%3" : "=f"(tau) : "f"(a), "f"(c), "f"(t));
#else
tau = fmsub (a, c, t);
......@@ -201,7 +200,7 @@ __gcc_qdiv (double a, double b, double c, double d)
numerically necessary. */
/* Use fused multiply-add to get low part of c * t. */
#ifndef _SOFT_FLOAT
#ifndef __NO_FPRS__
asm ("fmsub %0,%1,%2,%3" : "=f"(sigma) : "f"(c), "f"(t), "f"(s));
#else
sigma = fmsub (c, t, s);
......@@ -219,7 +218,7 @@ __gcc_qdiv (double a, double b, double c, double d)
return z.ldval;
}
#if defined (_SOFT_FLOAT) && defined (__LONG_DOUBLE_128__)
#if defined (_SOFT_DOUBLE) && defined (__LONG_DOUBLE_128__)
long double __gcc_qneg (double, double);
int __gcc_qeq (double, double, double, double);
......@@ -362,6 +361,10 @@ __gcc_utoq (unsigned int a)
return __gcc_dtoq ((double) a);
}
#endif
#ifdef __NO_FPRS__
#include "config/soft-fp/soft-fp.h"
#include "config/soft-fp/double.h"
#include "config/soft-fp/quad.h"
......
gcc/config/rs6000/eabispe.h
/* Core target definitions for GNU compiler
for PowerPC embedded targeted systems with SPE support.
Copyright (C) 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007
Free Software Foundation, Inc.
Contributed by Aldy Hernandez (aldyh@redhat.com).
This file is part of GCC.
......@@ -35,9 +36,6 @@
rs6000_spe_abi = 1; \
if (!rs6000_explicit_options.float_gprs) \
rs6000_float_gprs = 1; \
/* See note below. */ \
/*if (!rs6000_explicit_options.long_double)*/ \
/* rs6000_long_double_type_size = 128;*/ \
if (!rs6000_explicit_options.spe) \
rs6000_spe = 1; \
if (!rs6000_explicit_options.isel) \
......@@ -52,8 +50,7 @@
specifications, until I properly fix the emulation.
Enable these later.
#undef CPP_LONGDOUBLE_DEFAULT_SPEC
#define CPP_LONGDOUBLE_DEFAULT_SPEC "-D__LONG_DOUBLE_128__=1"
#define RS6000_DEFAULT_LONG_DOUBLE_SIZE (TARGET_SPE ? 128 : 64)
*/
#undef ASM_DEFAULT_SPEC
......
gcc/config/rs6000/libgcc-ppc-glibc.ver
......@@ -31,7 +31,7 @@ GCC_4.2.0 {
__gcc_qmul
__gcc_qdiv
%ifdef _SOFT_FLOAT
%ifdef _SOFT_DOUBLE
__gcc_qneg
__gcc_qeq
__gcc_qne
......
gcc/config/rs6000/linuxspe.h
......@@ -35,9 +35,6 @@
rs6000_spe_abi = 1; \
if (!rs6000_explicit_options.float_gprs) \
rs6000_float_gprs = 1; \
/* See note below. */ \
/*if (!rs6000_explicit_options.long_double)*/ \
/* rs6000_long_double_type_size = 128;*/ \
if (!rs6000_explicit_options.spe) \
rs6000_spe = 1; \
if (!rs6000_explicit_options.isel) \
......@@ -45,16 +42,5 @@
if (target_flags & MASK_64BIT) \
error ("-m64 not supported in this configuration")
/* The e500 ABI says that either long doubles are 128 bits, or if
implemented in any other size, the compiler/linker should error out.
We have no emulation libraries for 128 bit long doubles, and I hate
the dozens of failures on the regression suite. So I'm breaking ABI
specifications, until I properly fix the emulation.
Enable these later.
#undef CPP_LONGDOUBLE_DEFAULT_SPEC
#define CPP_LONGDOUBLE_DEFAULT_SPEC "-D__LONG_DOUBLE_128__=1"
*/
#undef ASM_DEFAULT_SPEC
#define ASM_DEFAULT_SPEC "-mppc -mspe -me500"
gcc/config/rs6000/rs6000-c.c
/* Subroutines for the C front end on the POWER and PowerPC architectures.
Copyright (C) 2002, 2003, 2004, 2005
Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007
Free Software Foundation, Inc.
Contributed by Zack Weinberg <zack@codesourcery.com>
......@@ -124,6 +124,8 @@ rs6000_cpu_cpp_builtins (cpp_reader *pfile)
builtin_define ("__SPE__");
if (TARGET_SOFT_FLOAT)
builtin_define ("_SOFT_FLOAT");
if (!(TARGET_HARD_FLOAT && (TARGET_FPRS || TARGET_E500_DOUBLE)))
builtin_define ("_SOFT_DOUBLE");
/* Used by lwarx/stwcx. errata work-around. */
if (rs6000_cpu == PROCESSOR_PPC405)
builtin_define ("__PPC405__");
......
gcc/config/rs6000/rs6000.h
......@@ -1160,6 +1160,7 @@ enum reg_class
&& reg_classes_intersect_p (FLOAT_REGS, CLASS)) \
: (((TARGET_E500_DOUBLE \
&& ((((TO) == DFmode) + ((FROM) == DFmode)) == 1 \
|| (((TO) == TFmode) + ((FROM) == TFmode)) == 1 \
|| (((TO) == DImode) + ((FROM) == DImode)) == 1)) \
|| (TARGET_SPE \
&& (SPE_VECTOR_MODE (FROM) + SPE_VECTOR_MODE (TO)) == 1)) \
......
gcc/config/rs6000/rs6000.md
......@@ -176,7 +176,9 @@
(define_mode_macro FP [(SF "TARGET_HARD_FLOAT")
(DF "TARGET_HARD_FLOAT && (TARGET_FPRS || TARGET_E500_DOUBLE)")
(TF "!TARGET_IEEEQUAD
&& TARGET_HARD_FLOAT && TARGET_FPRS && TARGET_LONG_DOUBLE_128")])
&& TARGET_HARD_FLOAT
&& (TARGET_FPRS || TARGET_E500_DOUBLE)
&& TARGET_LONG_DOUBLE_128")])
; Various instructions that come in SI and DI forms.
; A generic w/d attribute, for things like cmpw/cmpd.
......@@ -5730,7 +5732,7 @@
(clobber (match_dup 4))
(clobber (match_dup 5))
(clobber (match_dup 6))])]
"TARGET_HARD_FLOAT && TARGET_FPRS"
"TARGET_HARD_FLOAT && (TARGET_FPRS || TARGET_E500_DOUBLE)"
"
{
if (TARGET_E500_DOUBLE)
......@@ -8538,7 +8540,7 @@
[(set_attr "length" "8,8,8,20,20,16")])
(define_insn_and_split "*movtf_softfloat"
[(set (match_operand:TF 0 "nonimmediate_operand" "=r,Y,r")
[(set (match_operand:TF 0 "rs6000_nonimmediate_operand" "=r,Y,r")
(match_operand:TF 1 "input_operand" "YGHF,r,r"))]
"!TARGET_IEEEQUAD
&& (TARGET_SOFT_FLOAT || !TARGET_FPRS) && TARGET_LONG_DOUBLE_128
......@@ -8551,6 +8553,21 @@
[(set_attr "length" "20,20,16")])
(define_expand "extenddftf2"
[(set (match_operand:TF 0 "nonimmediate_operand" "")
(float_extend:TF (match_operand:DF 1 "input_operand" "")))]
"!TARGET_IEEEQUAD
&& TARGET_HARD_FLOAT
&& (TARGET_FPRS || TARGET_E500_DOUBLE)
&& TARGET_LONG_DOUBLE_128"
{
if (TARGET_E500_DOUBLE)
emit_insn (gen_spe_extenddftf2 (operands[0], operands[1]));
else
emit_insn (gen_extenddftf2_fprs (operands[0], operands[1]));
DONE;
})
(define_expand "extenddftf2_fprs"
[(parallel [(set (match_operand:TF 0 "nonimmediate_operand" "")
(float_extend:TF (match_operand:DF 1 "input_operand" "")))
(use (match_dup 2))])]
......@@ -8586,7 +8603,9 @@
[(set (match_operand:TF 0 "nonimmediate_operand" "")
(float_extend:TF (match_operand:SF 1 "gpc_reg_operand" "")))]
"!TARGET_IEEEQUAD
&& TARGET_HARD_FLOAT && TARGET_FPRS && TARGET_LONG_DOUBLE_128"
&& TARGET_HARD_FLOAT
&& (TARGET_FPRS || TARGET_E500_DOUBLE)
&& TARGET_LONG_DOUBLE_128"
{
rtx tmp = gen_reg_rtx (DFmode);
emit_insn (gen_extendsfdf2 (tmp, operands[1]));
......@@ -8598,7 +8617,9 @@
[(set (match_operand:DF 0 "gpc_reg_operand" "")
(float_truncate:DF (match_operand:TF 1 "gpc_reg_operand" "")))]
"!TARGET_IEEEQUAD
&& TARGET_HARD_FLOAT && TARGET_FPRS && TARGET_LONG_DOUBLE_128"
&& TARGET_HARD_FLOAT
&& (TARGET_FPRS || TARGET_E500_DOUBLE)
&& TARGET_LONG_DOUBLE_128"
"")
(define_insn_and_split "trunctfdf2_internal1"
......@@ -8625,7 +8646,22 @@
"fadd %0,%1,%L1"
[(set_attr "type" "fp")])
(define_insn_and_split "trunctfsf2"
(define_expand "trunctfsf2"
[(set (match_operand:SF 0 "gpc_reg_operand" "")
(float_truncate:SF (match_operand:TF 1 "gpc_reg_operand" "")))]
"!TARGET_IEEEQUAD
&& TARGET_HARD_FLOAT
&& (TARGET_FPRS || TARGET_E500_DOUBLE)
&& TARGET_LONG_DOUBLE_128"
{
if (TARGET_E500_DOUBLE)
emit_insn (gen_spe_trunctfsf2 (operands[0], operands[1]));
else
emit_insn (gen_trunctfsf2_fprs (operands[0], operands[1]));
DONE;
})
(define_insn_and_split "trunctfsf2_fprs"
[(set (match_operand:SF 0 "gpc_reg_operand" "=f")
(float_truncate:SF (match_operand:TF 1 "gpc_reg_operand" "f")))
(clobber (match_scratch:DF 2 "=f"))]
......@@ -8643,7 +8679,9 @@
[(set (match_operand:TF 0 "gpc_reg_operand" "")
(float:TF (match_operand:SI 1 "gpc_reg_operand" "")))]
"!TARGET_IEEEQUAD
&& TARGET_HARD_FLOAT && TARGET_FPRS && TARGET_LONG_DOUBLE_128"
&& TARGET_HARD_FLOAT
&& (TARGET_FPRS || TARGET_E500_DOUBLE)
&& TARGET_LONG_DOUBLE_128"
{
rtx tmp = gen_reg_rtx (DFmode);
expand_float (tmp, operands[1], false);
......@@ -8664,6 +8702,22 @@
(set_attr "length" "20")])
(define_expand "fix_trunctfsi2"
[(set (match_operand:SI 0 "gpc_reg_operand" "")
(fix:SI (match_operand:TF 1 "gpc_reg_operand" "")))]
"!TARGET_IEEEQUAD
&& (TARGET_POWER2 || TARGET_POWERPC)
&& TARGET_HARD_FLOAT
&& (TARGET_FPRS || TARGET_E500_DOUBLE)
&& TARGET_LONG_DOUBLE_128"
{
if (TARGET_E500_DOUBLE)
emit_insn (gen_spe_fix_trunctfsi2 (operands[0], operands[1]));
else
emit_insn (gen_fix_trunctfsi2_fprs (operands[0], operands[1]));
DONE;
})
(define_expand "fix_trunctfsi2_fprs"
[(parallel [(set (match_operand:SI 0 "gpc_reg_operand" "")
(fix:SI (match_operand:TF 1 "gpc_reg_operand" "")))
(clobber (match_dup 2))
......@@ -8705,7 +8759,16 @@
DONE;
})
(define_insn "negtf2"
(define_expand "negtf2"
[(set (match_operand:TF 0 "gpc_reg_operand" "")
(neg:TF (match_operand:TF 1 "gpc_reg_operand" "")))]
"!TARGET_IEEEQUAD
&& TARGET_HARD_FLOAT
&& (TARGET_FPRS || TARGET_E500_DOUBLE)
&& TARGET_LONG_DOUBLE_128"
"")
(define_insn "negtf2_internal"
[(set (match_operand:TF 0 "gpc_reg_operand" "=f")
(neg:TF (match_operand:TF 1 "gpc_reg_operand" "f")))]
"!TARGET_IEEEQUAD
......@@ -8721,14 +8784,24 @@
(set_attr "length" "8")])
(define_expand "abstf2"
[(set (match_operand:TF 0 "gpc_reg_operand" "=f")
(abs:TF (match_operand:TF 1 "gpc_reg_operand" "f")))]
[(set (match_operand:TF 0 "gpc_reg_operand" "")
(abs:TF (match_operand:TF 1 "gpc_reg_operand" "")))]
"!TARGET_IEEEQUAD
&& TARGET_HARD_FLOAT && TARGET_FPRS && TARGET_LONG_DOUBLE_128"
&& TARGET_HARD_FLOAT
&& (TARGET_FPRS || TARGET_E500_DOUBLE)
&& TARGET_LONG_DOUBLE_128"
"
{
rtx label = gen_label_rtx ();
emit_insn (gen_abstf2_internal (operands[0], operands[1], label));
if (TARGET_E500_DOUBLE)
{
if (flag_unsafe_math_optimizations)
emit_insn (gen_spe_abstf2_tst (operands[0], operands[1], label));
else
emit_insn (gen_spe_abstf2_cmp (operands[0], operands[1], label));
}
else
emit_insn (gen_abstf2_internal (operands[0], operands[1], label));
emit_label (label);
DONE;
}")
......@@ -8761,7 +8834,7 @@
; List r->r after r->"o<>", otherwise reload will try to reload a
; non-offsettable address by using r->r which won't make progress.
(define_insn "*movdi_internal32"
[(set (match_operand:DI 0 "nonimmediate_operand" "=o<>,r,r,*f,*f,m,r")
[(set (match_operand:DI 0 "rs6000_nonimmediate_operand" "=o<>,r,r,*f,*f,m,r")
(match_operand:DI 1 "input_operand" "r,r,m,f,m,f,IJKnGHF"))]
"! TARGET_POWERPC64
&& (gpc_reg_operand (operands[0], DImode)
......@@ -8798,7 +8871,7 @@
}")
(define_split
[(set (match_operand:DI 0 "nonimmediate_operand" "")
[(set (match_operand:DI 0 "rs6000_nonimmediate_operand" "")
(match_operand:DI 1 "input_operand" ""))]
"reload_completed && !TARGET_POWERPC64
&& gpr_or_gpr_p (operands[0], operands[1])"
......
libgcc/ChangeLog
2007-01-23 Joseph Myers <joseph@codesourcery.com>
* config/rs6000/t-ldbl128: Always use -mlong-double-128.
2007-01-21 Andrew Pinski <pinskia@gmail.com>
PR target/30519
......
libgcc/config/rs6000/t-ldbl128
SHLIB_MAPFILES += $(gcc_srcdir)/config/rs6000/libgcc-ppc-glibc.ver
# Use -mlong-double-128 only when not compiling nof libgcc.
predefined-macros := $(shell true | $(CC) $(CFLAGS) -x c -dD -E -)
ifeq ($(findstring _SOFT_FLOAT,$(predefined-macros)),)
HOST_LIBGCC2_CFLAGS += -mlong-double-128
endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment