[arm] Add alternative canonicalizations for subtract-with-carry + shift

This patch adds a couple of alternative canonicalizations to allow
combine to match a subtract-with-carry operation when one of the operands
is shifted first.  The most common case of this is when combining a
sign-extend of one operand with a long-long value during subtraction.
The RSC variant is only enabled for Arm, the SBC variant for any 32-bit
compilation.

	* config/arm/arm.md (subsi3_carryin_shift_alt): New pattern.
	(rsbsi3_carryin_shift_alt): Likewise.

From-SVN: r277176

gcc/ChangeLog

 2019-10-18  Richard Earnshaw  <rearnsha@arm.com>
 
+	* config/arm/arm.md (subsi3_carryin_shift_alt): New pattern.
+	(rsbsi3_carryin_shift_alt): Likewise.
+
+2019-10-18  Richard Earnshaw  <rearnsha@arm.com>
+
 	* config/arm/arm.md (negscc_borrow): New pattern.
 	(mov_negscc): Don't split if the insn would match negscc_borrow.
 	* config/arm/thumb2.md (thumb2_mov_negscc): Likewise.

gcc/config/arm/arm.md

@@ -1048,6 +1048,23 @@
 				    (const_string "alu_shift_reg")))]
 )
 
+(define_insn "*subsi3_carryin_shift_alt"
+  [(set (match_operand:SI 0 "s_register_operand" "=r")
+	(minus:SI (minus:SI
+		   (match_operand:SI 1 "s_register_operand" "r")
+		   (match_operand:SI 5 "arm_borrow_operation" ""))
+		  (match_operator:SI 2 "shift_operator"
+		   [(match_operand:SI 3 "s_register_operand" "r")
+		    (match_operand:SI 4 "reg_or_int_operand" "rM")])))]
+  "TARGET_32BIT"
+  "sbc%?\\t%0, %1, %3%S2"
+  [(set_attr "conds" "use")
+   (set_attr "predicable" "yes")
+   (set (attr "type") (if_then_else (match_operand 4 "const_int_operand" "")
+				    (const_string "alu_shift_imm")
+				    (const_string "alu_shift_reg")))]
+)
+
 (define_insn "*rsbsi3_carryin_shift"
   [(set (match_operand:SI 0 "s_register_operand" "=r")
 	(minus:SI (minus:SI
@@ -1065,6 +1082,23 @@
 		      (const_string "alu_shift_reg")))]
 )
 
+(define_insn "*rsbsi3_carryin_shift_alt"
+  [(set (match_operand:SI 0 "s_register_operand" "=r")
+	(minus:SI (minus:SI
+		   (match_operator:SI 2 "shift_operator"
+		    [(match_operand:SI 3 "s_register_operand" "r")
+		     (match_operand:SI 4 "reg_or_int_operand" "rM")])
+		    (match_operand:SI 5 "arm_borrow_operation" ""))
+		  (match_operand:SI 1 "s_register_operand" "r")))]
+  "TARGET_ARM"
+  "rsc%?\\t%0, %1, %3%S2"
+  [(set_attr "conds" "use")
+   (set_attr "predicable" "yes")
+   (set (attr "type") (if_then_else (match_operand 4 "const_int_operand" "")
+		      (const_string "alu_shift_imm")
+		      (const_string "alu_shift_reg")))]
+)
+
 ; transform ((x << y) - 1) to ~(~(x-1) << y)  Where X is a constant.
 (define_split
   [(set (match_operand:SI 0 "s_register_operand" "")