(movqi+2): Add address registers.

(movxf+1): Disable for TARGET_5200.
(movxf+2): New pattern for TARGET_5200.
(addsi3): Add define_expand.  Move code to output_addsi3.
(addsi3_internal): Renamed from addsi3.  Disable for TARGET_5200.
(addsi3_5200): New pattern for TARGET_5200.

From-SVN: r13951

gcc/config/m68k/m68k.md

@@ -986,8 +986,8 @@
   "* return output_move_qimode (operands);")
 
 (define_insn ""
-  [(set (match_operand:QI 0 "general_operand" "=d<>,dm")
-	(match_operand:QI 1 "general_operand" "dmi,d<>"))]
+  [(set (match_operand:QI 0 "general_operand" "=d*a<>,d*am")
+	(match_operand:QI 1 "general_operand" "d*ami,d*a<>"))]
   "TARGET_5200"
   "* return output_move_qimode (operands);")
 
@@ -1186,7 +1186,7 @@
 (define_insn ""
   [(set (match_operand:XF 0 "nonimmediate_operand" "=rm,rf,&rof<>")
 	(match_operand:XF 1 "nonimmediate_operand" "rf,m,rof<>"))]
-  "! TARGET_68881"
+  "! TARGET_68881 && ! TARGET_5200"
   "*
 {
   if (FP_REG_P (operands[0]))
@@ -1224,6 +1224,12 @@
 }
 ")
 
+(define_insn ""
+  [(set (match_operand:XF 0 "nonimmediate_operand" "=r,g")
+	(match_operand:XF 1 "nonimmediate_operand" "g,r"))]
+  "! TARGET_68881 && TARGET_5200"
+  "* return output_move_double (operands);")
+
 (define_expand "movdi"
   ;; Let's see if it really still needs to handle fp regs, and, if so, why.
   [(set (match_operand:DI 0 "general_operand" "")
@@ -2110,101 +2116,30 @@
   return \"\";
 }")
 
+(define_expand "addsi3"
+  [(set (match_operand:SI 0 "general_operand" "")
+	(plus:SI (match_operand:SI 1 "general_operand" "")
+		 (match_operand:SI 2 "general_operand" "")))]
+  ""
+  "")
+
 ;; Note that the middle two alternatives are near-duplicates
 ;; in order to handle insns generated by reload.
 ;; This is needed since they are not themselves reloaded,
 ;; so commutativity won't apply to them.
-(define_insn "addsi3"
+(define_insn "*addsi3_internal"
   [(set (match_operand:SI 0 "general_operand" "=m,?a,?a,r")
 	(plus:SI (match_operand:SI 1 "general_operand" "%0,a,rJK,0")
 		 (match_operand:SI 2 "general_operand" "dIKLs,rJK,a,mrIKLs")))]
-  ""
-  "*
-{
-  if (! operands_match_p (operands[0], operands[1]))
-    {
-      if (!ADDRESS_REG_P (operands[1]))
-	{
-	  rtx tmp = operands[1];
-
-	  operands[1] = operands[2];
-	  operands[2] = tmp;
-	}
+  "! TARGET_5200"
+  "* return output_addsi3 (operands);")
 
-      /* These insns can result from reloads to access
-	 stack slots over 64k from the frame pointer.  */
-      if (GET_CODE (operands[2]) == CONST_INT
-	  && INTVAL (operands[2]) + 0x8000 >= (unsigned) 0x10000)
-        return \"move%.l %2,%0\;add%.l %1,%0\";
-#ifdef SGS
-      if (GET_CODE (operands[2]) == REG)
-	return \"lea 0(%1,%2.l),%0\";
-      else
-	return \"lea %c2(%1),%0\";
-#else /* not SGS */
-#ifdef MOTOROLA
-      if (GET_CODE (operands[2]) == REG)
-	return \"lea (%1,%2.l),%0\";
-      else
-	return \"lea (%c2,%1),%0\";
-#else /* not MOTOROLA (MIT syntax) */
-      if (GET_CODE (operands[2]) == REG)
-	return \"lea %1@(0,%2:l),%0\";
-      else
-	return \"lea %1@(%c2),%0\";
-#endif /* not MOTOROLA */
-#endif /* not SGS */
-    }
-  if (GET_CODE (operands[2]) == CONST_INT)
-    {
-#ifndef NO_ADDSUB_Q
-      if (INTVAL (operands[2]) > 0
-	  && INTVAL (operands[2]) <= 8)
-	return \"addq%.l %2,%0\";
-      if (INTVAL (operands[2]) < 0
-	  && INTVAL (operands[2]) >= -8)
-        {
-	  operands[2] = gen_rtx (CONST_INT, VOIDmode,
-			         - INTVAL (operands[2]));
-	  return \"subq%.l %2,%0\";
-	}
-      /* On the CPU32 it is faster to use two addql instructions to
-	 add a small integer (8 < N <= 16) to a register.
-	 Likewise for subql. */
-      if (TARGET_CPU32 && REG_P (operands[0]))
-	{
-	  if (INTVAL (operands[2]) > 8
-	      && INTVAL (operands[2]) <= 16)
-	    {
-	      operands[2] = gen_rtx (CONST_INT, VOIDmode, 
-				      INTVAL (operands[2]) - 8);
-	      return \"addq%.l %#8,%0\;addq%.l %2,%0\";
-	    }
-	  if (INTVAL (operands[2]) < -8
-	      && INTVAL (operands[2]) >= -16)
-	    {
-	      operands[2] = gen_rtx (CONST_INT, VOIDmode,
-				      - INTVAL (operands[2]) - 8);
-	      return \"subq%.l %#8,%0\;subq%.l %2,%0\";
-	    }
-	}
-#endif
-      if (ADDRESS_REG_P (operands[0])
-	  && INTVAL (operands[2]) >= -0x8000
-	  && INTVAL (operands[2]) < 0x8000)
-	{
-	  if (TARGET_68040)
-	    return \"add%.w %2,%0\";
-	  else
-#ifdef MOTOROLA  
-	    return \"lea (%c2,%0),%0\";
-#else
-	    return \"lea %0@(%c2),%0\";
-#endif
-	}
-    }
-  return \"add%.l %2,%0\";
-}")
+(define_insn "*addsi3_5200"
+  [(set (match_operand:SI 0 "general_operand" "=m,?a,?a,r")
+	(plus:SI (match_operand:SI 1 "general_operand" "%0,a,rJK,0")
+		 (match_operand:SI 2 "general_operand" "d,rJK,a,mrIKLs")))]
+  "TARGET_5200"
+  "* return output_addsi3 (operands);")
 
 (define_insn ""
   [(set (match_operand:SI 0 "general_operand" "=a")