Skip to content

M
macroplacement
Commit e60ab2d4 by sakundu
Options

Updated run_invs.tcl with routeOpt design 

Signed-off-by: sakundu <sakundu@ucsd.edu>
parent e1a4ac1b
Showing with 83 additions and 5 deletions
Flows/ASAP7/ariane133/scripts/cadence/run_invs.tcl
# This script was written and developed by ABKGroup students at UCSD. However, the underlying commands and reports are copyrighted by Cadence.
# We thank Cadence for granting permission to share our research to help promote and foster the next generation of innovators.
setLibraryUnit -time 1.0ps
source lib_setup.tcl
source design_setup.tcl
......@@ -40,6 +39,8 @@ init_design -setup {WC_VIEW} -hold {BC_VIEW}
set_power_analysis_mode -leakage_power_view WC_VIEW -dynamic_power_view WC_VIEW
set_interactive_constraint_modes {CON}
setAnalysisMode -reset
setAnalysisMode -analysisType onChipVariation -cppr both
clearGlobalNets
globalNetConnect VDD -type pgpin -pin VDD -inst * -override
......@@ -151,6 +152,11 @@ echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
defOut -netlist -floorplan -routing ${DESIGN}_route.def
#route_opt_design
optDesign -postRoute
set rpt_post_route [extract_report postRouteOpt]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
summaryReport -noHtml -outfile summaryReport/post_route.sum
saveDesign ${encDir}/${DESIGN}.enc
defOut -netlist -floorplan -routing ${DESIGN}.def
......
Flows/ASAP7/ariane136/scripts/cadence/run_invs.tcl
......@@ -40,6 +40,8 @@ init_design -setup {WC_VIEW} -hold {BC_VIEW}
set_power_analysis_mode -leakage_power_view WC_VIEW -dynamic_power_view WC_VIEW
set_interactive_constraint_modes {CON}
setAnalysisMode -reset
setAnalysisMode -analysisType onChipVariation -cppr both
clearGlobalNets
globalNetConnect VDD -type pgpin -pin VDD -inst * -override
......@@ -151,6 +153,11 @@ echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
defOut -netlist -floorplan -routing ${DESIGN}_route.def
#route_opt_design
optDesign -postRoute
set rpt_post_route [extract_report postRouteOpt]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
summaryReport -noHtml -outfile summaryReport/post_route.sum
saveDesign ${encDir}/${DESIGN}.enc
defOut -netlist -floorplan -routing ${DESIGN}.def
......
Flows/ASAP7/mempool_tile/scripts/cadence/run_invs.tcl
......@@ -40,6 +40,8 @@ init_design -setup {WC_VIEW} -hold {BC_VIEW}
set_power_analysis_mode -leakage_power_view WC_VIEW -dynamic_power_view WC_VIEW
set_interactive_constraint_modes {CON}
setAnalysisMode -reset
setAnalysisMode -analysisType onChipVariation -cppr both
clearGlobalNets
globalNetConnect VDD -type pgpin -pin VDD -inst * -override
......@@ -147,6 +149,11 @@ echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
defOut -netlist -floorplan -routing ${DESIGN}_route.def
#route_opt_design
optDesign -postRoute
set rpt_post_route [extract_report postRouteOpt]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
summaryReport -noHtml -outfile summaryReport/post_route.sum
saveDesign ${encDir}/${DESIGN}.enc
defOut -netlist -floorplan -routing ${DESIGN}.def
......
Flows/ASAP7/nvdla/scripts/cadence/run_invs.tcl
......@@ -40,6 +40,8 @@ init_design -setup {WC_VIEW} -hold {BC_VIEW}
set_power_analysis_mode -leakage_power_view WC_VIEW -dynamic_power_view WC_VIEW
set_interactive_constraint_modes {CON}
setAnalysisMode -reset
setAnalysisMode -analysisType onChipVariation -cppr both
clearGlobalNets
globalNetConnect VDD -type pgpin -pin VDD -inst * -override
......@@ -151,6 +153,11 @@ echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
defOut -netlist -floorplan -routing ${DESIGN}_route.def
#route_opt_design
optDesign -postRoute
set rpt_post_route [extract_report postRouteOpt]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
summaryReport -noHtml -outfile summaryReport/post_route.sum
saveDesign ${encDir}/${DESIGN}.enc
defOut -netlist -floorplan -routing ${DESIGN}.def
......
Flows/NanGate45/ariane133/scripts/cadence/run_invs.tcl
......@@ -138,15 +138,15 @@ defOut -netlist -floorplan -routing ${DESIGN}_route.def
set rpt_post_route [extract_report postRoute]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
### Run DRC and LVS ###
verify_connectivity -error 0 -geom_connect -no_antenna
verify_drc -limit 0
#route_opt_design
optDesign -postRoute
set rpt_post_route [extract_report postRouteOpt]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
### Run DRC and LVS ###
verify_connectivity -error 0 -geom_connect -no_antenna
verify_drc -limit 0
summaryReport -noHtml -outfile summaryReport/post_route.sum
saveDesign ${encDir}/${DESIGN}.enc
......
Flows/NanGate45/ariane136/scripts/cadence/run_invs.tcl
......@@ -39,6 +39,8 @@ init_design -setup {WC_VIEW} -hold {BC_VIEW}
set_power_analysis_mode -leakage_power_view WC_VIEW -dynamic_power_view WC_VIEW
set_interactive_constraint_modes {CON}
setAnalysisMode -reset
setAnalysisMode -analysisType onChipVariation -cppr both
clearGlobalNets
globalNetConnect VDD -type pgpin -pin VDD -inst * -override
......@@ -141,6 +143,11 @@ set rpt_post_route [extract_report postRoute]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
defOut -netlist -floorplan -routing ${DESIGN}_route.def
#route_opt_design
optDesign -postRoute
set rpt_post_route [extract_report postRouteOpt]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
summaryReport -noHtml -outfile summaryReport/post_route.sum
saveDesign ${encDir}/${DESIGN}.enc
defOut -netlist -floorplan -routing ${DESIGN}.def
......
Flows/NanGate45/mempool_group/scripts/cadence/run_invs.tcl
......@@ -41,6 +41,8 @@ init_design -setup {WC_VIEW} -hold {BC_VIEW}
set_power_analysis_mode -leakage_power_view WC_VIEW -dynamic_power_view WC_VIEW
set_interactive_constraint_modes {CON}
setAnalysisMode -reset
setAnalysisMode -analysisType onChipVariation -cppr both
clearGlobalNets
globalNetConnect VDD -type pgpin -pin VDD -inst * -override
......
Flows/NanGate45/mempool_tile/scripts/cadence/run_invs.tcl
......@@ -39,6 +39,8 @@ init_design -setup {WC_VIEW} -hold {BC_VIEW}
set_power_analysis_mode -leakage_power_view WC_VIEW -dynamic_power_view WC_VIEW
set_interactive_constraint_modes {CON}
setAnalysisMode -reset
setAnalysisMode -analysisType onChipVariation -cppr both
clearGlobalNets
globalNetConnect VDD -type pgpin -pin VDD -inst * -override
......@@ -137,6 +139,11 @@ set rpt_post_route [extract_report postRoute]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
defOut -netlist -floorplan -routing ${DESIGN}_route.def
#route_opt_design
optDesign -postRoute
set rpt_post_route [extract_report postRouteOpt]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
summaryReport -noHtml -outfile summaryReport/post_route.sum
saveDesign ${encDir}/${DESIGN}.enc
defOut -netlist -floorplan -routing ${DESIGN}.def
......
Flows/NanGate45/nvdla/scripts/cadence/run_invs.tcl
......@@ -39,6 +39,8 @@ init_design -setup {WC_VIEW} -hold {BC_VIEW}
set_power_analysis_mode -leakage_power_view WC_VIEW -dynamic_power_view WC_VIEW
set_interactive_constraint_modes {CON}
setAnalysisMode -reset
setAnalysisMode -analysisType onChipVariation -cppr both
clearGlobalNets
globalNetConnect VDD -type pgpin -pin VDD -inst * -override
......@@ -141,6 +143,11 @@ set rpt_post_route [extract_report postRoute]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
defOut -netlist -floorplan -routing ${DESIGN}_route.def
#route_opt_design
optDesign -postRoute
set rpt_post_route [extract_report postRouteOpt]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
summaryReport -noHtml -outfile summaryReport/post_route.sum
saveDesign ${encDir}/${DESIGN}.enc
defOut -netlist -floorplan -routing ${DESIGN}.def
......
Flows/SKY130HD/ariane133/scripts/cadence/run_invs.tcl
......@@ -39,6 +39,8 @@ init_design -setup {WC_VIEW} -hold {BC_VIEW}
set_power_analysis_mode -leakage_power_view WC_VIEW -dynamic_power_view WC_VIEW
set_interactive_constraint_modes {CON}
setAnalysisMode -reset
setAnalysisMode -analysisType onChipVariation -cppr both
clearGlobalNets
globalNetConnect VDD -type pgpin -pin VDD -inst * -override
......@@ -142,6 +144,11 @@ echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
defOut -netlist -floorplan -routing ${DESIGN}_route.def
#route_opt_design
optDesign -postRoute
set rpt_post_route [extract_report postRouteOpt]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
summaryReport -noHtml -outfile summaryReport/post_route.sum
saveDesign ${encDir}/${DESIGN}.enc
defOut -netlist -floorplan -routing ${DESIGN}.def
......
Flows/SKY130HD/ariane136/scripts/cadence/run_invs.tcl
......@@ -39,6 +39,8 @@ init_design -setup {WC_VIEW} -hold {BC_VIEW}
set_power_analysis_mode -leakage_power_view WC_VIEW -dynamic_power_view WC_VIEW
set_interactive_constraint_modes {CON}
setAnalysisMode -reset
setAnalysisMode -analysisType onChipVariation -cppr both
clearGlobalNets
globalNetConnect VDD -type pgpin -pin VDD -inst * -override
......@@ -142,6 +144,11 @@ echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
defOut -netlist -floorplan -routing ${DESIGN}_route.def
#route_opt_design
optDesign -postRoute
set rpt_post_route [extract_report postRouteOpt]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
summaryReport -noHtml -outfile summaryReport/post_route.sum
saveDesign ${encDir}/${DESIGN}.enc
defOut -netlist -floorplan -routing ${DESIGN}.def
......
Flows/SKY130HD/mempool_tile/scripts/cadence/run_invs.tcl
......@@ -39,6 +39,8 @@ init_design -setup {WC_VIEW} -hold {BC_VIEW}
set_power_analysis_mode -leakage_power_view WC_VIEW -dynamic_power_view WC_VIEW
set_interactive_constraint_modes {CON}
setAnalysisMode -reset
setAnalysisMode -analysisType onChipVariation -cppr both
clearGlobalNets
globalNetConnect VDD -type pgpin -pin VDD -inst * -override
......@@ -138,6 +140,11 @@ echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
defOut -netlist -floorplan -routing ${DESIGN}_route.def
#route_opt_design
optDesign -postRoute
set rpt_post_route [extract_report postRouteOpt]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
summaryReport -noHtml -outfile summaryReport/post_route.sum
saveDesign ${encDir}/${DESIGN}.enc
defOut -netlist -floorplan -routing ${DESIGN}.def
......
Flows/SKY130HD/nvdla/scripts/cadence/run_invs.tcl
......@@ -39,6 +39,8 @@ init_design -setup {WC_VIEW} -hold {BC_VIEW}
set_power_analysis_mode -leakage_power_view WC_VIEW -dynamic_power_view WC_VIEW
set_interactive_constraint_modes {CON}
setAnalysisMode -reset
setAnalysisMode -analysisType onChipVariation -cppr both
clearGlobalNets
globalNetConnect VDD -type pgpin -pin VDD -inst * -override
......@@ -142,6 +144,11 @@ echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
defOut -netlist -floorplan -routing ${DESIGN}_route.def
#route_opt_design
optDesign -postRoute
set rpt_post_route [extract_report postRouteOpt]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
summaryReport -noHtml -outfile summaryReport/post_route.sum
saveDesign ${encDir}/${DESIGN}.enc
defOut -netlist -floorplan -routing ${DESIGN}.def
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment