Skip to content

M
macroplacement
Commit 3caac975 by Ravi Varadarajan
Options

Updated run_genus_hybrid.tcl and run_invs.tcl update syn_handoff dir with sdc… 

Updated run_genus_hybrid.tcl and run_invs.tcl update syn_handoff dir with sdc file and also include post synthesis reports

Signed-off-by: Ravi Varadarajan <rvaradarajan@ucsd.edu>
parent d710544a
Showing with 31 additions and 20 deletions
Flows/ASAP7/mempool_tile/scripts/cadence/run_invs.tcl
# This script was written and developed by ABKGroup students at UCSD. However, the underlying commands and reports are copyrighted by Cadence. # This script was written and developed by ABKGroup students at UCSD. However, the underlying commands and reports are copyrighted by Cadence.
# We thank Cadence for granting permission to share our research to help promote and foster the next generation of innovators. # We thank Cadence for granting permission to share our research to help promote and foster the next generation of innovators.
setLibraryUnit -time 1.0ps
source lib_setup.tcl source lib_setup.tcl
source design_setup.tcl source design_setup.tcl
source mmmc_setup.tcl
setMultiCpuUsage -localCpu 16 setMultiCpuUsage -localCpu 16
set util 0.3 set util 0.3
...@@ -12,6 +10,7 @@ set handoff_dir "./syn_handoff" ...@@ -12,6 +10,7 @@ set handoff_dir "./syn_handoff"
set netlist ${handoff_dir}/${DESIGN}.v set netlist ${handoff_dir}/${DESIGN}.v
set sdc ${handoff_dir}/${DESIGN}.sdc set sdc ${handoff_dir}/${DESIGN}.sdc
source mmmc_setup.tcl
set rptDir summaryReport/ set rptDir summaryReport/
set encDir enc/ set encDir enc/
...@@ -71,6 +70,12 @@ if {[info exist ::env(PHY_SYNTH)] && $::env(PHY_SYNTH) == 1} { ...@@ -71,6 +70,12 @@ if {[info exist ::env(PHY_SYNTH)] && $::env(PHY_SYNTH) == 1} {
#snapFPlan -pin #snapFPlan -pin
} }
### Write postSynth report ###
echo "Physical Design Stage, Core Area (um^2), Standard Cell Area (um^2), Macro Area (um^2), Total Power (mW), Wirelength(um), WS(ns), TNS(ns), Congestion(H), Congestion(V)" > ${DESIGN}_DETAILS.rpt
source ../../../../util/extract_report.tcl
set rpt_post_synth [extract_report postSynth]
echo "$rpt_post_synth" >> ${DESIGN}_DETAILS.rpt
### Write out the def files ### ### Write out the def files ###
source ../../../../util/write_required_def.tcl source ../../../../util/write_required_def.tcl
...@@ -88,8 +93,6 @@ setDesignMode -bottomRoutingLayer 2 ...@@ -88,8 +93,6 @@ setDesignMode -bottomRoutingLayer 2
place_opt_design -out_dir $rptDir -prefix place place_opt_design -out_dir $rptDir -prefix place
saveDesign $encDir/${DESIGN}_placed.enc saveDesign $encDir/${DESIGN}_placed.enc
echo "Physical Design Stage, Core Area (um^2), Standard Cell Area (um^2), Macro Area (um^2), Total Power (mW), Wirelength(um), WS(ns), TNS(ns), Congestion(H), Congestion(V)" > ${DESIGN}_DETAILS.rpt
source ../../../../util/extract_report.tcl
set rpt_pre_cts [extract_report preCTS] set rpt_pre_cts [extract_report preCTS]
echo "$rpt_pre_cts" >> ${DESIGN}_DETAILS.rpt echo "$rpt_pre_cts" >> ${DESIGN}_DETAILS.rpt
......
Flows/NanGate45/mempool_tile/scripts/cadence/run_invs.tcl
...@@ -2,15 +2,15 @@ ...@@ -2,15 +2,15 @@
# We thank Cadence for granting permission to share our research to help promote and foster the next generation of innovators. # We thank Cadence for granting permission to share our research to help promote and foster the next generation of innovators.
source lib_setup.tcl source lib_setup.tcl
source design_setup.tcl source design_setup.tcl
set handoff_dir "./syn_handoff"
set netlist ${handoff_dir}/${DESIGN}.v
set sdc ${handoff_dir}/${DESIGN}.sdc
source mmmc_setup.tcl source mmmc_setup.tcl
setMultiCpuUsage -localCpu 16 setMultiCpuUsage -localCpu 16
set util 0.3 set util 0.3
set handoff_dir "./syn_handoff"
set netlist ${handoff_dir}/${DESIGN}.v
set sdc ${handoff_dir}/${DESIGN}.sdc
set rptDir summaryReport/ set rptDir summaryReport/
set encDir enc/ set encDir enc/
...@@ -68,6 +68,12 @@ if {[info exist ::env(PHY_SYNTH)] && $::env(PHY_SYNTH) == 1} { ...@@ -68,6 +68,12 @@ if {[info exist ::env(PHY_SYNTH)] && $::env(PHY_SYNTH) == 1} {
refine_macro_place refine_macro_place
} }
### Write postSynth report ###
echo "Physical Design Stage, Core Area (um^2), Standard Cell Area (um^2), Macro Area (um^2), Total Power (mW), Wirelength(um), WS(ns), TNS(ns), Congestion(H), Congestion(V)" > ${DESIGN}_DETAILS.rpt
source ../../../../util/extract_report.tcl
set rpt_post_synth [extract_report postSynth]
echo "$rpt_post_synth" >> ${DESIGN}_DETAILS.rpt
### Write out the def files ### ### Write out the def files ###
source ../../../../util/write_required_def.tcl source ../../../../util/write_required_def.tcl
...@@ -85,8 +91,6 @@ setDesignMode -bottomRoutingLayer 2 ...@@ -85,8 +91,6 @@ setDesignMode -bottomRoutingLayer 2
place_opt_design -out_dir $rptDir -prefix place place_opt_design -out_dir $rptDir -prefix place
saveDesign $encDir/${DESIGN}_placed.enc saveDesign $encDir/${DESIGN}_placed.enc
echo "Physical Design Stage, Core Area (um^2), Standard Cell Area (um^2), Macro Area (um^2), Total Power (mW), Wirelength(um), WS(ns), TNS(ns), Congestion(H), Congestion(V)" > ${DESIGN}_DETAILS.rpt
source ../../../../util/extract_report.tcl
set rpt_pre_cts [extract_report preCTS] set rpt_pre_cts [extract_report preCTS]
echo "$rpt_pre_cts" >> ${DESIGN}_DETAILS.rpt echo "$rpt_pre_cts" >> ${DESIGN}_DETAILS.rpt
...@@ -128,22 +132,22 @@ setNanoRouteMode -routeExpAdvancedTechnology true ...@@ -128,22 +132,22 @@ setNanoRouteMode -routeExpAdvancedTechnology true
setNanoRouteMode -grouteExpWithTimingDriven false setNanoRouteMode -grouteExpWithTimingDriven false
routeDesign routeDesign
#route_opt_design
saveDesign ${encDir}/${DESIGN}_route.enc saveDesign ${encDir}/${DESIGN}_route.enc
defOut -netlist -floorplan -routing ${DESIGN}_route.def
set rpt_post_route [extract_report postRoute]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
### Run DRC and LVS ### ### Run DRC and LVS ###
verify_connectivity -error 0 -geom_connect -no_antenna verify_connectivity -error 0 -geom_connect -no_antenna
verify_drc -limit 0 verify_drc -limit 0
set rpt_post_route [extract_report postRoute]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
defOut -netlist -floorplan -routing ${DESIGN}_route.def
#route_opt_design #route_opt_design
optDesign -postRoute optDesign -postRoute
set rpt_post_route [extract_report postRouteOpt] set rpt_post_route [extract_report postRouteOpt]
echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt echo "$rpt_post_route" >> ${DESIGN}_DETAILS.rpt
summaryReport -noHtml -outfile summaryReport/post_route.sum summaryReport -noHtml -outfile summaryReport/post_route.sum
saveDesign ${encDir}/${DESIGN}.enc saveDesign ${encDir}/${DESIGN}.enc
defOut -netlist -floorplan -routing ${DESIGN}.def defOut -netlist -floorplan -routing ${DESIGN}.def
......
Flows/SKY130HD/mempool_tile/scripts/cadence/run_genus_hybrid.tcl
...@@ -57,8 +57,7 @@ set_db init_hdl_search_path $rtldir ...@@ -57,8 +57,7 @@ set_db init_hdl_search_path $rtldir
source rtl_list.tcl source rtl_list.tcl
foreach rtl_file $rtl_all { foreach rtl_file $rtl_all {
#read_hdl -sv $rtl_file read_hdl -sv $rtl_file
read_hdl -language sv -define TARGET_SYNTHESIS -define XPULPIMG=1 $rtl_file
} }
elaborate $DESIGN elaborate $DESIGN
...@@ -137,6 +136,7 @@ write_reports -directory ${REPORTS_PATH} -tag final ...@@ -137,6 +136,7 @@ write_reports -directory ${REPORTS_PATH} -tag final
if {[info exist ::env(PHY_SYNTH)] && $::env(PHY_SYNTH) == 1} { if {[info exist ::env(PHY_SYNTH)] && $::env(PHY_SYNTH) == 1} {
write_design -innovus -base_name ${HANDOFF_PATH}/${DESIGN} write_design -innovus -base_name ${HANDOFF_PATH}/${DESIGN}
exec cp ${HANDOFF_PATH}/${DESIGN}.CON.sdc ${HANDOFF_PATH}/${DESIGN}.sdc
} else { } else {
write_sdc >${HANDOFF_PATH}/${DESIGN}.sdc write_sdc >${HANDOFF_PATH}/${DESIGN}.sdc
write_hdl > ${HANDOFF_PATH}/${DESIGN}.v write_hdl > ${HANDOFF_PATH}/${DESIGN}.v
......
Flows/SKY130HD/mempool_tile/scripts/cadence/run_invs.tcl
...@@ -2,7 +2,6 @@ ...@@ -2,7 +2,6 @@
# We thank Cadence for granting permission to share our research to help promote and foster the next generation of innovators. # We thank Cadence for granting permission to share our research to help promote and foster the next generation of innovators.
source lib_setup.tcl source lib_setup.tcl
source design_setup.tcl source design_setup.tcl
source mmmc_setup.tcl
setMultiCpuUsage -localCpu 16 setMultiCpuUsage -localCpu 16
set util 0.3 set util 0.3
...@@ -11,6 +10,7 @@ set handoff_dir "./syn_handoff" ...@@ -11,6 +10,7 @@ set handoff_dir "./syn_handoff"
set netlist ${handoff_dir}/${DESIGN}.v set netlist ${handoff_dir}/${DESIGN}.v
set sdc ${handoff_dir}/${DESIGN}.sdc set sdc ${handoff_dir}/${DESIGN}.sdc
source mmmc_setup.tcl
set rptDir summaryReport/ set rptDir summaryReport/
set encDir enc/ set encDir enc/
...@@ -68,6 +68,12 @@ if {[info exist ::env(PHY_SYNTH)] && $::env(PHY_SYNTH) == 1} { ...@@ -68,6 +68,12 @@ if {[info exist ::env(PHY_SYNTH)] && $::env(PHY_SYNTH) == 1} {
refine_macro_place refine_macro_place
} }
### Write postSynth report ###
echo "Physical Design Stage, Core Area (um^2), Standard Cell Area (um^2), Macro Area (um^2), Total Power (mW), Wirelength(um), WS(ns), TNS(ns), Congestion(H), Congestion(V)" > ${DESIGN}_DETAILS.rpt
source ../../../../util/extract_report.tcl
set rpt_post_synth [extract_report postSynth]
echo "$rpt_post_synth" >> ${DESIGN}_DETAILS.rpt
### Write out the def files ### ### Write out the def files ###
source ../../../../util/write_required_def.tcl source ../../../../util/write_required_def.tcl
...@@ -85,8 +91,6 @@ setDesignMode -bottomRoutingLayer 2 ...@@ -85,8 +91,6 @@ setDesignMode -bottomRoutingLayer 2
place_opt_design -out_dir $rptDir -prefix place place_opt_design -out_dir $rptDir -prefix place
saveDesign $encDir/${DESIGN}_placed.enc saveDesign $encDir/${DESIGN}_placed.enc
echo "Physical Design Stage, Core Area (um^2), Standard Cell Area (um^2), Macro Area (um^2), Total Power (mW), Wirelength(um), WS(ns), TNS(ns), Congestion(H), Congestion(V)" > ${DESIGN}_DETAILS.rpt
source ../../../../util/extract_report.tcl
set rpt_pre_cts [extract_report preCTS] set rpt_pre_cts [extract_report preCTS]
echo "$rpt_pre_cts" >> ${DESIGN}_DETAILS.rpt echo "$rpt_pre_cts" >> ${DESIGN}_DETAILS.rpt
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment