fpgaMatch.c

/**CFile****************************************************************

  FileName    [fpgaMatch.c]

  PackageName [MVSIS 1.3: Multi-valued logic synthesis system.]

  Synopsis    [Technology mapping for variable-size-LUT FPGAs.]

  Author      [MVSIS Group]
  
  Affiliation [UC Berkeley]

  Date        [Ver. 2.0. Started - August 18, 2004.]

  Revision    [$Id: fpgaMatch.c,v 1.7 2004/09/30 21:18:10 satrajit Exp $]

***********************************************************************/

#include "fpgaInt.h"

ABC_NAMESPACE_IMPL_START


////////////////////////////////////////////////////////////////////////
///                        DECLARATIONS                              ///
////////////////////////////////////////////////////////////////////////

static int          Fpga_MatchNode( Fpga_Man_t * p, Fpga_Node_t * pNode, int fDelayOriented );
static int          Fpga_MatchNodeArea( Fpga_Man_t * p, Fpga_Node_t * pNode );
static int          Fpga_MatchNodeSwitch( Fpga_Man_t * p, Fpga_Node_t * pNode );

static Fpga_Cut_t * Fpga_MappingAreaWithoutNode( Fpga_Man_t * p, Fpga_Node_t * pFanout, Fpga_Node_t * pNodeNo );
static int          Fpga_MappingMatchesAreaArray( Fpga_Man_t * p, Fpga_NodeVec_t * vNodes );

////////////////////////////////////////////////////////////////////////
///                     FUNCTION DEFINITIONS                         ///
////////////////////////////////////////////////////////////////////////

/**Function*************************************************************

  Synopsis    [Finds the best delay assignment of LUTs.]

  Description [This procedure iterates through all the nodes
  of the object graph reachable from the POs and assigns the best
  match to each of them. If the flag fDelayOriented is set to 1, it 
  tries to minimize the arrival time and uses the area flow as a
  tie-breaker. If the flag is set to 0, it considers all the cuts,
  whose arrival times matches the required time at the node, and
  minimizes the area flow using the arrival time as a tie-breaker.
  
  Before this procedure is called, the required times should be set
  and the fanout counts should be computed. In the first iteration,
  the required times are set to very large number (by NodeCreate) 
  and the fanout counts are set to the number of fanouts in the AIG.
  In the following iterations, the required times are set by the
  backward traversal, while the fanouts are estimated approximately.
  
  If the arrival times of the PI nodes are given, they should be 
  assigned to the PIs after the cuts are computed and before this
  procedure is called for the first time.]
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
int Fpga_MappingMatches( Fpga_Man_t * p, int fDelayOriented )
{
    ProgressBar * pProgress;
    Fpga_Node_t * pNode;
    int i, nNodes;
    
    // assign the arrival times of the PIs
    for ( i = 0; i < p->nInputs; i++ )
        p->pInputs[i]->pCutBest->tArrival = p->pInputArrivals[i];

    // match LUTs with nodes in the topological order
    nNodes = p->vAnds->nSize;
    pProgress = Extra_ProgressBarStart( stdout, nNodes );
    for ( i = 0; i < nNodes; i++ )
    {
        pNode = p->vAnds->pArray[i];
        if ( !Fpga_NodeIsAnd( pNode ) )
            continue;
        // skip a secondary node
        if ( pNode->pRepr )
            continue;
        // match the node
        Fpga_MatchNode( p, pNode, fDelayOriented );
        Extra_ProgressBarUpdate( pProgress, i, "Matches ..." );
    }
    Extra_ProgressBarStop( pProgress );
/*
    if ( !fDelayOriented )
    {
        float Area = 0.0;
        for ( i = 0; i < p->nOutputs; i++ )
        {
            printf( "%5.2f ", Fpga_Regular(p->pOutputs[i])->pCutBest->aFlow );
            Area += Fpga_Regular(p->pOutputs[i])->pCutBest->aFlow;
        }
        printf( "\nTotal = %5.2f\n", Area );
    }
*/
    return 1;
}

/**Function*************************************************************

  Synopsis    [Computes the best matching for one node.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
int Fpga_MatchNode( Fpga_Man_t * p, Fpga_Node_t * pNode, int fDelayOriented )
{
    Fpga_Cut_t * pCut, * pCutBestOld;
    int clk;
    // make sure that at least one cut other than the trivial is present
    if ( pNode->pCuts->pNext == NULL )
    {
        printf( "\nError: A node in the mapping graph does not have feasible cuts.\n" );
        return 0;
    }

    // estimate the fanouts of the node
    if ( pNode->aEstFanouts < 0 )
        pNode->aEstFanouts = (float)pNode->nRefs;
    else
        pNode->aEstFanouts = (float)((2.0 * pNode->aEstFanouts + pNode->nRefs) / 3.0);
//        pNode->aEstFanouts = (float)pNode->nRefs;

    pCutBestOld = pNode->pCutBest;
    pNode->pCutBest = NULL;
    for ( pCut = pNode->pCuts->pNext; pCut; pCut = pCut->pNext )
    {
        // compute the arrival time of the cut and its area flow
clk = clock();
        Fpga_CutGetParameters( p, pCut );
//p->time2 += clock() - clk;
        // drop the cut if it does not meet the required times
        if ( Fpga_FloatMoreThan(p, pCut->tArrival, pNode->tRequired) )
            continue;
        // if no cut is assigned, use the current one
        if ( pNode->pCutBest == NULL )
        {
            pNode->pCutBest = pCut;
            continue;
        }
        // choose the best cut using one of the two criteria:
        // (1) delay oriented mapping (first traversal), delay first, area-flow as a tie-breaker
        // (2) area recovery (subsequent traversals), area-flow first, delay as a tie-breaker
        if ( (fDelayOriented && 
               (Fpga_FloatMoreThan(p, pNode->pCutBest->tArrival, pCut->tArrival) || 
                (Fpga_FloatEqual(p, pNode->pCutBest->tArrival, pCut->tArrival) && Fpga_FloatMoreThan(p, pNode->pCutBest->aFlow, pCut->aFlow)) )) ||
             (!fDelayOriented && 
               (Fpga_FloatMoreThan(p, pNode->pCutBest->aFlow, pCut->aFlow) || 
                (Fpga_FloatEqual(p, pNode->pCutBest->aFlow, pCut->aFlow) && Fpga_FloatMoreThan(p, pNode->pCutBest->tArrival, pCut->tArrival))))  )
        {
            pNode->pCutBest = pCut;
        }
    }

    // make sure the match is found
    if ( pNode->pCutBest == NULL )
    {
        if ( pCutBestOld == NULL )
        {
//            printf( "\nError: Could not match a node in the object graph.\n" );
            return 0;
        }
        pNode->pCutBest = pCutBestOld;
    }
    return 1;
}





/**Function*************************************************************

  Synopsis    [Finds the best area assignment of LUTs.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
int Fpga_MappingMatchesArea( Fpga_Man_t * p )
{
    ProgressBar * pProgress;
    Fpga_Node_t * pNode;
    int i, nNodes;
    
    // assign the arrival times of the PIs
    for ( i = 0; i < p->nInputs; i++ )
        p->pInputs[i]->pCutBest->tArrival = p->pInputArrivals[i];

    // match LUTs with nodes in the topological order
    nNodes = p->vAnds->nSize;
    pProgress = Extra_ProgressBarStart( stdout, nNodes );
    for ( i = 0; i < nNodes; i++ )
    {
        pNode = p->vAnds->pArray[i];
        if ( !Fpga_NodeIsAnd( pNode ) )
            continue;
        // skip a secondary node
        if ( pNode->pRepr )
            continue;
        // match the node
        Fpga_MatchNodeArea( p, pNode );
        Extra_ProgressBarUpdate( pProgress, i, "Matches ..." );
    }
    Extra_ProgressBarStop( pProgress );
    return 1;
}

/**Function*************************************************************

  Synopsis    [Finds the best area assignment of LUTs.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
int Fpga_MappingMatchesAreaArray( Fpga_Man_t * p, Fpga_NodeVec_t * vNodes )
{
    Fpga_Node_t * pNode;
    int i;

    // match LUTs with nodes in the topological order
    for ( i = 0; i < vNodes->nSize; i++ )
    {
        pNode = vNodes->pArray[i];
        if ( !Fpga_NodeIsAnd( pNode ) )
            continue;
        // skip a secondary node
        if ( pNode->pRepr )
            continue;
        // match the node
        if ( !Fpga_MatchNodeArea( p, pNode ) )
            return 0;
    }
    return 1;
}

/**Function*************************************************************

  Synopsis    [Computes the best matching for one node.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
int Fpga_MatchNodeArea( Fpga_Man_t * p, Fpga_Node_t * pNode )
{
    Fpga_Cut_t * pCut, * pCutBestOld;
    float aAreaCutBest;
    int clk;
    // make sure that at least one cut other than the trivial is present
    if ( pNode->pCuts->pNext == NULL )
    {
        printf( "\nError: A node in the mapping graph does not have feasible cuts.\n" );
        return 0;
    }

    // remember the old cut
    pCutBestOld = pNode->pCutBest;
    // deref the old cut
    if ( pNode->nRefs ) 
        aAreaCutBest = Fpga_CutDeref( p, pNode, pNode->pCutBest, 0 );

    // search for a better cut
    pNode->pCutBest = NULL;
    for ( pCut = pNode->pCuts->pNext; pCut; pCut = pCut->pNext )
    {
        // compute the arrival time of the cut and its area flow
clk = clock();
        pCut->tArrival = Fpga_TimeCutComputeArrival( p, pCut );
//p->time2 += clock() - clk;
        // drop the cut if it does not meet the required times
        if ( Fpga_FloatMoreThan( p, pCut->tArrival, pNode->tRequired ) )
            continue;
        // get the area of this cut
        pCut->aFlow = Fpga_CutGetAreaDerefed( p, pCut );
        // if no cut is assigned, use the current one
        if ( pNode->pCutBest == NULL )
        {
            pNode->pCutBest = pCut;
            continue;
        }
        // choose the best cut as follows: exact area first, delay as a tie-breaker
        if ( Fpga_FloatMoreThan(p, pNode->pCutBest->aFlow, pCut->aFlow) || 
             (Fpga_FloatEqual(p, pNode->pCutBest->aFlow, pCut->aFlow) && Fpga_FloatMoreThan(p, pNode->pCutBest->tArrival, pCut->tArrival)) )
        {
            pNode->pCutBest = pCut;
        }
    }

    // make sure the match is found
    if ( pNode->pCutBest == NULL )
    {
        pNode->pCutBest = pCutBestOld; 
        // insert the new cut
        if ( pNode->nRefs ) 
            pNode->pCutBest->aFlow = Fpga_CutRef( p, pNode, pNode->pCutBest, 0 );
//        printf( "\nError: Could not match a node in the object graph.\n" );
        return 0;
    }

    // insert the new cut
    // make sure the area selected is not worse then the original area
    if ( pNode->nRefs ) 
    {
        pNode->pCutBest->aFlow = Fpga_CutRef( p, pNode, pNode->pCutBest, 0 );
//        assert( pNode->pCutBest->aFlow <= aAreaCutBest );
//        assert( pNode->tRequired < FPGA_FLOAT_LARGE );
    }
    return 1;
}




/**Function*************************************************************

  Synopsis    [Finds the best area assignment of LUTs.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
int Fpga_MappingMatchesSwitch( Fpga_Man_t * p )
{
    ProgressBar * pProgress;
    Fpga_Node_t * pNode;
    int i, nNodes;
    
    // assign the arrival times of the PIs
    for ( i = 0; i < p->nInputs; i++ )
        p->pInputs[i]->pCutBest->tArrival = p->pInputArrivals[i];

    // match LUTs with nodes in the topological order
    nNodes = p->vAnds->nSize;
    pProgress = Extra_ProgressBarStart( stdout, nNodes );
    for ( i = 0; i < nNodes; i++ )
    {
        pNode = p->vAnds->pArray[i];
        if ( !Fpga_NodeIsAnd( pNode ) )
            continue;
        // skip a secondary node
        if ( pNode->pRepr )
            continue;
        // match the node
        Fpga_MatchNodeSwitch( p, pNode );
        Extra_ProgressBarUpdate( pProgress, i, "Matches ..." );
    }
    Extra_ProgressBarStop( pProgress );
    return 1;
}

/**Function*************************************************************

  Synopsis    [Computes the best matching for one node.]

  Description []
               
  SideEffects []

  SeeAlso     []

***********************************************************************/
int Fpga_MatchNodeSwitch( Fpga_Man_t * p, Fpga_Node_t * pNode )
{
    Fpga_Cut_t * pCut, * pCutBestOld;
    float aAreaCutBest = FPGA_FLOAT_LARGE;
    int clk;
    // make sure that at least one cut other than the trivial is present
    if ( pNode->pCuts->pNext == NULL )
    {
        printf( "\nError: A node in the mapping graph does not have feasible cuts.\n" );
        return 0;
    }

    // remember the old cut
    pCutBestOld = pNode->pCutBest;
    // deref the old cut
    if ( pNode->nRefs ) 
        aAreaCutBest = Fpga_CutDerefSwitch( p, pNode, pNode->pCutBest, 0 );

    // search for a better cut
    pNode->pCutBest = NULL;
    for ( pCut = pNode->pCuts->pNext; pCut; pCut = pCut->pNext )
    {
        // compute the arrival time of the cut and its area flow
clk = clock();
        pCut->tArrival = Fpga_TimeCutComputeArrival( p, pCut );
//p->time2 += clock() - clk;
        // drop the cut if it does not meet the required times
        if ( Fpga_FloatMoreThan( p, pCut->tArrival, pNode->tRequired ) )
            continue;
        // get the area of this cut
        pCut->aFlow = Fpga_CutGetSwitchDerefed( p, pNode, pCut );
        // if no cut is assigned, use the current one
        if ( pNode->pCutBest == NULL )
        {
            pNode->pCutBest = pCut;
            continue;
        }
        // choose the best cut as follows: exact area first, delay as a tie-breaker
        if ( Fpga_FloatMoreThan(p, pNode->pCutBest->aFlow, pCut->aFlow) || 
             (Fpga_FloatEqual(p, pNode->pCutBest->aFlow, pCut->aFlow) && Fpga_FloatMoreThan(p, pNode->pCutBest->tArrival, pCut->tArrival)) )
        {
            pNode->pCutBest = pCut;
        }
    }

    // make sure the match is found
    if ( pNode->pCutBest == NULL )
    {
        pNode->pCutBest = pCutBestOld; 
        // insert the new cut
        if ( pNode->nRefs ) 
            pNode->pCutBest->aFlow = Fpga_CutRefSwitch( p, pNode, pNode->pCutBest, 0 );
//        printf( "\nError: Could not match a node in the object graph.\n" );
        return 0;
    }

    // insert the new cut
    // make sure the area selected is not worse then the original area
    if ( pNode->nRefs ) 
    {
        pNode->pCutBest->aFlow = Fpga_CutRefSwitch( p, pNode, pNode->pCutBest, 0 );
        assert( pNode->pCutBest->aFlow <= aAreaCutBest + 0.001 );
//        assert( pNode->tRequired < FPGA_FLOAT_LARGE );
    }
    return 1;
}


#if 0
/**function*************************************************************

  synopsis    [References the cut.]

  description [This procedure is similar to the procedure NodeReclaim.]
               
  sideeffects []

  seealso     []

***********************************************************************/
void Fpga_Experiment( Fpga_Man_t * p )
{
    int Counter[10] = {0};
    Fpga_Node_t * pNode;
    int i;

    for ( i = 0; i < p->nOutputs; i++ )
    {
        pNode = Fpga_Regular(p->pOutputs[i]);
        pNode->vFanouts = NULL;
    }

    for ( i = 0; i < p->vAnds->nSize; i++ )
    {
        pNode = p->vAnds->pArray[i];
        if ( !Fpga_NodeIsAnd( pNode ) )
            continue;
        if ( pNode->vFanouts == NULL )
            continue;
        if ( pNode->vFanouts->nSize >= 10 )
            continue;
        Counter[pNode->vFanouts->nSize]++;
    }

    printf( "Fanout stats: " );
    for ( i = 0; i < 10; i++ )
        printf( " %d=%d", i, Counter[i] );
    printf( "\n" );
    printf( "Area before = %4.2f.\n", Fpga_MappingArea(p) );

    for ( i = 0; i < p->vAnds->nSize; i++ )
    {
        Fpga_NodeVec_t * vNodesTfo;
        float AreaBefore;

        pNode = p->vAnds->pArray[i];
        if ( !Fpga_NodeIsAnd( pNode ) )
            continue;
        if ( pNode->vFanouts == NULL )
            continue;
        if ( pNode->vFanouts->nSize != 1 && pNode->vFanouts->nSize != 2 && pNode->vFanouts->nSize != 3 )
            continue;

//        assert( pNode->nRefs > 0 );
        if ( pNode->nRefs == 0 )
            continue;

        AreaBefore = pNode->pCutBest->aFlow;
        pNode->pCutBest->aFlow = FPGA_FLOAT_LARGE;

        Fpga_TimeComputeRequiredGlobal( p, 0 );

        vNodesTfo = Fpga_CollectNodeTfo( p, pNode );
        if ( Fpga_MappingMatchesAreaArray( p, vNodesTfo ) == 0 )
            printf( "attempt failed\n" );
        else
            printf( "attempt succeeded\n" );
        Fpga_NodeVecFree( vNodesTfo );

        pNode->pCutBest->aFlow = AreaBefore;
//        break;
    }
    printf( "Area after = %4.2f.\n", Fpga_MappingArea(p) );
//    printf( "AREA GAIN = %4.2f (%.2f %%)\n", GainTotal, 100.0 * GainTotal / Fpga_MappingArea(p) );
}



/**function*************************************************************

  synopsis    [References the cut.]

  description [This procedure is similar to the procedure NodeReclaim.]
               
  sideeffects []

  seealso     []

***********************************************************************/
void Fpga_Experiment2( Fpga_Man_t * p )
{
    int Counter[10] = {0};
    Fpga_Cut_t * ppCutsNew[10];
    Fpga_Cut_t * ppCutsOld[10];
    Fpga_Node_t * pFanout, * pNode;
    float Gain, Loss, GainTotal,  Area1, Area2;
    int i, k;

    for ( i = 0; i < p->nOutputs; i++ )
    {
        pNode = Fpga_Regular(p->pOutputs[i]);
        pNode->vFanouts = NULL;
    }

    for ( i = 0; i < p->vAnds->nSize; i++ )
    {
        pNode = p->vAnds->pArray[i];
        if ( !Fpga_NodeIsAnd( pNode ) )
            continue;
        if ( pNode->vFanouts == NULL )
            continue;
        if ( pNode->vFanouts->nSize >= 10 )
            continue;
        Counter[pNode->vFanouts->nSize]++;
    }

    printf( "Fanout stats: " );
    for ( i = 0; i < 10; i++ )
        printf( " %d=%d", i, Counter[i] );
    printf( "\n" );
    printf( "Area before = %4.2f.\n", Fpga_MappingArea(p) );

    GainTotal = 0;
    for ( i = 0; i < p->vAnds->nSize; i++ )
    {
        pNode = p->vAnds->pArray[i];
        if ( !Fpga_NodeIsAnd( pNode ) )
            continue;
        if ( pNode->vFanouts == NULL )
            continue;
        if ( pNode->vFanouts->nSize != 2 )//&& pNode->vFanouts->nSize != 2 && pNode->vFanouts->nSize != 3 )
            continue;

        assert( pNode->nRefs > 0 );

        // for all fanouts, find the best cut without this node
        for ( k = 0; k < pNode->vFanouts->nSize; k++ )
        {
            pFanout = pNode->vFanouts->pArray[k];
            ppCutsOld[k] = pFanout->pCutBest;
            ppCutsNew[k] = Fpga_MappingAreaWithoutNode( p, pFanout, pNode );
            if ( ppCutsNew[k] == NULL )
                break;
        }
        if ( k != pNode->vFanouts->nSize )
        {
            printf( "Node %4d: Skipped.\n", pNode->Num );
            continue;
        }


        // compute the area after replacing all the cuts
        Gain = 0;
        for ( k = 0; k < pNode->vFanouts->nSize; k++ )
        {
            pFanout = pNode->vFanouts->pArray[k];
            // deref old cut
            Area1 = Fpga_MatchAreaDeref( p, ppCutsOld[k] );
            // assign new cut
            pFanout->pCutBest = ppCutsNew[k];
            // ref new cut
            Area2 = Fpga_MatchAreaRef( p, ppCutsNew[k] );
            // compute the gain
            Gain += Area1 - Area2;
        }

        printf( "%d ", pNode->nRefs );

        // undo the whole thing
        Loss = 0;
        for ( k = 0; k < pNode->vFanouts->nSize; k++ )
        {
            pFanout = pNode->vFanouts->pArray[k];
            // deref old cut
            Area1 = Fpga_MatchAreaDeref( p, ppCutsNew[k] );
            // assign new cut
            pFanout->pCutBest = ppCutsOld[k];
            // ref new cut
            Area2 = Fpga_MatchAreaRef( p, ppCutsOld[k] );
            // compute the gain
            Loss += Area2 - Area1;
        }
        assert( Gain == Loss );


        printf( "Node %4d: Fanouts = %d. Cut area = %4.2f. Gain = %4.2f.\n", 
            pNode->Num, pNode->nRefs, pNode->pCutBest->aFlow, Gain );

        if ( Gain > 0 )
            GainTotal += Gain;
    }
    printf( "Area after = %4.2f.\n", Fpga_MappingArea(p) );
    printf( "AREA GAIN = %4.2f (%.2f %%)\n", GainTotal, 100.0 * GainTotal / Fpga_MappingArea(p) );
}


/**function*************************************************************

  synopsis    [Computes the loss of area when node is not allowed.]

  description [Returning FPGA_FLOAT_LARGE means it does not exist.]
               
  sideeffects []

  seealso     []

***********************************************************************/
Fpga_Cut_t * Fpga_MappingAreaWithoutNode( Fpga_Man_t * p, Fpga_Node_t * pNode, Fpga_Node_t * pNodeNo )
{
    Fpga_Cut_t * pCut, * pCutBestOld, * pCutRes;
    float aAreaCutBest;
    int i, clk;
    // make sure that at least one cut other than the trivial is present
    if ( pNode->pCuts->pNext == NULL )
    {
        printf( "\nError: A node in the mapping graph does not have feasible cuts.\n" );
        return 0;
    }

    assert( pNode->nRefs > 0 );

    // remember the old cut
    pCutBestOld = pNode->pCutBest;
    // deref the old cut
    aAreaCutBest = Fpga_MatchAreaDeref( p, pNode->pCutBest );

    // search for a better cut
    pNode->pCutBest = NULL;
    for ( pCut = pNode->pCuts->pNext; pCut; pCut = pCut->pNext )
    {
        // compute the arrival time of the cut and its area flow
clk = clock();
        Fpga_MatchCutGetArrTime( p, pCut );
//p->time2 += clock() - clk;
        // drop the cut if it does not meet the required times
        if ( pCut->tArrival > pNode->tRequired )
            continue;

        // skip the cut if it contains the no-node
        for ( i = 0; i < pCut->nLeaves; i++ )
            if ( pCut->ppLeaves[i] == pNodeNo )
                break;
        if ( i != pCut->nLeaves )
            continue;

        // get the area of this cut
        pCut->aFlow = Fpga_MatchAreaCount( p, pCut );
        // if no cut is assigned, use the current one
        if ( pNode->pCutBest == NULL )
        {
            pNode->pCutBest = pCut;
            continue;
        }
        // choose the best cut as follows: exact area first, delay as a tie-breaker
        if ( pNode->pCutBest->aFlow >  pCut->aFlow || 
             pNode->pCutBest->aFlow == pCut->aFlow && pNode->pCutBest->tArrival > pCut->tArrival  )
        {
            pNode->pCutBest = pCut;
        }
    }

    // make sure the match is found
    if ( pNode->pCutBest == NULL )
    {
        pNode->pCutBest = pCutBestOld;
        // insert the new cut
        pNode->pCutBest->aFlow = Fpga_MatchAreaRef( p, pNode->pCutBest );
        return NULL;
    }

    pCutRes = pNode->pCutBest;
    pNode->pCutBest = pCutBestOld;

    // insert the new cut
    pNode->pCutBest->aFlow = Fpga_MatchAreaRef( p, pNode->pCutBest );

    // make sure the area selected is not worse then the original area
    assert( pNode->pCutBest->aFlow == aAreaCutBest );
    assert( pNode->tRequired < FPGA_FLOAT_LARGE );
    return pCutRes;
}

#endif


/**function*************************************************************

  synopsis    [Performs area minimization using a heuristic algorithm.]

  description []
               
  sideeffects []

  seealso     []

***********************************************************************/
float Fpga_FindBestNode( Fpga_Man_t * p, Fpga_NodeVec_t * vNodes, Fpga_Node_t ** ppNode, Fpga_Cut_t ** ppCutBest )
{
    Fpga_Node_t * pNode;
    Fpga_Cut_t * pCut;
    float Gain, CutArea1, CutArea2, CutArea3;
    int i;

    Gain = 0;
    for ( i = 0; i < vNodes->nSize; i++ )
    {
        pNode = vNodes->pArray[i];
        // deref the current cut
        CutArea1 = Fpga_CutDeref( p, pNode, pNode->pCutBest, 0 );

        // ref all the cuts
        for ( pCut = pNode->pCuts->pNext; pCut; pCut = pCut->pNext )
        {
            if ( pCut == pNode->pCutBest )
                continue;
            if ( pCut->tArrival > pNode->tRequired )
                continue;

            CutArea2 = Fpga_CutGetAreaDerefed( p, pCut );
            if ( Gain < CutArea1 - CutArea2 )
            {
                *ppNode = pNode;
                *ppCutBest = pCut;
                Gain = CutArea1 - CutArea2;
            }
        }
        // ref the old cut
        CutArea3 = Fpga_CutRef( p, pNode, pNode->pCutBest, 0 );
        assert( CutArea1 == CutArea3 );
    }
    if ( Gain == 0 )
        printf( "Returning no gain.\n" );

    return Gain;
}

////////////////////////////////////////////////////////////////////////
///                       END OF FILE                                ///
////////////////////////////////////////////////////////////////////////
ABC_NAMESPACE_IMPL_END