/* Output routines for GCC for Hitachi Super-H.
   Copyright (C) 1993, 1994, 1995, 1996 Free Software Foundation, Inc.

This file is part of GNU CC.

GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.

GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING.  If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA.  */

/* Contributed by Steve Chamberlain (sac@cygnus.com).
   Improved by Jim Wilson (wilson@cygnus.com).  */

#include "config.h"

#include <stdio.h>

#include "rtl.h"
#include "tree.h"
#include "flags.h"
#include "insn-flags.h"
#include "expr.h"
#include "regs.h"
#include "hard-reg-set.h"
#include "output.h"
#include "insn-attr.h"

#define MSW (TARGET_LITTLE_ENDIAN ? 1 : 0)
#define LSW (TARGET_LITTLE_ENDIAN ? 0 : 1)

/* ??? The pragma interrupt support will not work for SH3.  */
/* This is set by #pragma interrupt and #pragma trapa, and causes gcc to
   output code for the next function appropriate for an interrupt handler.  */
int pragma_interrupt;

/* This is set by #pragma trapa, and is similar to the above, except that
   the compiler doesn't emit code to preserve all registers.  */
static int pragma_trapa;

/* This is set by #pragma nosave_low_regs.  This is useful on the SH3,
   which has a separate set of low regs for User and Supervisor modes.
   This should only be used for the lowest level of interrupts.  Higher levels
   of interrupts must save the registers in case they themselves are
   interrupted.  */
int pragma_nosave_low_regs;

/* This is used for communication between SETUP_INCOMING_VARARGS and
   sh_expand_prologue.  */
int current_function_anonymous_args;

/* Global variables from toplev.c and final.c that are used within, but
   not declared in any header file.  */
extern char *version_string;
extern int *insn_addresses;

/* Global variables for machine-dependent things. */

/* Which cpu are we scheduling for.  */
enum processor_type sh_cpu;

/* Saved operands from the last compare to use when we generate an scc
   or bcc insn.  */

rtx sh_compare_op0;
rtx sh_compare_op1;

/* Provides the class number of the smallest class containing
   reg number.  */

int regno_reg_class[FIRST_PSEUDO_REGISTER] =
{
  R0_REGS, GENERAL_REGS, GENERAL_REGS, GENERAL_REGS,
  GENERAL_REGS, GENERAL_REGS, GENERAL_REGS, GENERAL_REGS,
  GENERAL_REGS, GENERAL_REGS, GENERAL_REGS, GENERAL_REGS,
  GENERAL_REGS, GENERAL_REGS, GENERAL_REGS, GENERAL_REGS,
  GENERAL_REGS, PR_REGS, T_REGS, NO_REGS,
  MAC_REGS, MAC_REGS, FPUL_REGS, NO_REGS,
  FP0_REGS,FP_REGS, FP_REGS, FP_REGS,
  FP_REGS, FP_REGS, FP_REGS, FP_REGS,
  FP_REGS, FP_REGS, FP_REGS, FP_REGS,
  FP_REGS, FP_REGS, FP_REGS, FP_REGS,
};

/* Provide reg_class from a letter such as appears in the machine
   description.  */

enum reg_class reg_class_from_letter[] =
{
  /* a */ NO_REGS, /* b */ NO_REGS, /* c */ NO_REGS, /* d */ NO_REGS,
  /* e */ NO_REGS, /* f */ FP_REGS, /* g */ NO_REGS, /* h */ NO_REGS,
  /* i */ NO_REGS, /* j */ NO_REGS, /* k */ NO_REGS, /* l */ PR_REGS,
  /* m */ NO_REGS, /* n */ NO_REGS, /* o */ NO_REGS, /* p */ NO_REGS,
  /* q */ NO_REGS, /* r */ NO_REGS, /* s */ NO_REGS, /* t */ T_REGS,
  /* u */ NO_REGS, /* v */ NO_REGS, /* w */ FP0_REGS, /* x */ MAC_REGS,
  /* y */ FPUL_REGS, /* z */ R0_REGS
};

/* Print the operand address in x to the stream.  */

void
print_operand_address (stream, x)
     FILE *stream;
     rtx x;
{
  switch (GET_CODE (x))
    {
    case REG:
      fprintf (stream, "@%s", reg_names[REGNO (x)]);
      break;

    case PLUS:
      {
	rtx base = XEXP (x, 0);
	rtx index = XEXP (x, 1);

	switch (GET_CODE (index))
	  {
	  case CONST_INT:
	    fprintf (stream, "@(%d,%s)", INTVAL (index),
		     reg_names[REGNO (base)]);
	    break;

	  case REG:
	    fprintf (stream, "@(r0,%s)",
		     reg_names[MAX (REGNO (base), REGNO (index))]);
	    break;

	  default:
	    debug_rtx (x);
	    abort ();
	  }
      }
      break;

    case PRE_DEC:
      fprintf (stream, "@-%s", reg_names[REGNO (XEXP (x, 0))]);
      break;

    case POST_INC:
      fprintf (stream, "@%s+", reg_names[REGNO (XEXP (x, 0))]);
      break;

    default:
      output_addr_const (stream, x);
      break;
    }
}

/* Print operand x (an rtx) in assembler syntax to file stream
   according to modifier code.

   '.'  print a .s if insn needs delay slot
   '@'  print rte or rts depending upon pragma interruptness
   '#'  output a nop if there is nothing to put in the delay slot
   'O'  print a constant without the #
   'R'  print the LSW of a dp value - changes if in little endian
   'S'  print the MSW of a dp value - changes if in little endian
   'T'  print the next word of a dp value - same as 'R' in big endian mode.  */

void
print_operand (stream, x, code)
     FILE *stream;
     rtx x;
     int code;
{
  switch (code)
    {
    case '.':
      if (final_sequence
	  && ! INSN_ANNULLED_BRANCH_P (XVECEXP (final_sequence, 0, 0)))
	fprintf (stream, ".s");
      break;
    case '@':
      if (pragma_interrupt)
	fprintf (stream, "rte");
      else
	fprintf (stream, "rts");
      break;
    case '#':
      /* Output a nop if there's nothing in the delay slot.  */
      if (dbr_sequence_length () == 0)
	fprintf (stream, "\n\tnop");
      break;
    case 'O':
      output_addr_const (stream, x);
      break;
    case 'R':
      fputs (reg_names[REGNO (x) + LSW], (stream));
      break;
    case 'S':
      fputs (reg_names[REGNO (x) + MSW], (stream));
      break;
    case 'T':
      /* Next word of a double.  */
      switch (GET_CODE (x))
	{
	case REG:
	  fputs (reg_names[REGNO (x) + 1], (stream));
	  break;
	case MEM:
	  print_operand_address (stream,
				 XEXP (adj_offsettable_operand (x, 4), 0));
	  break;
	}
      break;
    default:
      switch (GET_CODE (x))
	{
	case REG:
	  fputs (reg_names[REGNO (x)], (stream));
	  break;
	case MEM:
	  output_address (XEXP (x, 0));
	  break;
	default:
	  fputc ('#', stream);
	  output_addr_const (stream, x);
	  break;
	}
      break;
    }
}

/* Emit code to perform a block move.  Choose the best method.

   OPERANDS[0] is the destination.
   OPERANDS[1] is the source.
   OPERANDS[2] is the size.
   OPERANDS[3] is the alignment safe to use.  */

int
expand_block_move (operands)
     rtx *operands;
{
  int align = INTVAL (operands[3]);
  int constp = (GET_CODE (operands[2]) == CONST_INT);
  int bytes = (constp ? INTVAL (operands[2]) : 0);

  /* If it isn't a constant number of bytes, or if it doesn't have 4 byte
     alignment, or if it isn't a multiple of 4 bytes, then fail.  */
  if (! constp || align < 4 || (bytes % 4 != 0))
    return 0;

  if (bytes < 64)
    {
      char entry[30];
      tree entry_name;
      rtx func_addr_rtx;
      rtx r4 = gen_rtx (REG, SImode, 4);
      rtx r5 = gen_rtx (REG, SImode, 5);

      sprintf (entry, "__movstrSI%d", bytes);
      entry_name = get_identifier (entry);

      func_addr_rtx
	= copy_to_mode_reg (Pmode,
			    gen_rtx (SYMBOL_REF, Pmode,
				     IDENTIFIER_POINTER (entry_name)));
      emit_insn (gen_move_insn (r4, XEXP (operands[0], 0)));
      emit_insn (gen_move_insn (r5, XEXP (operands[1], 0)));
      emit_insn (gen_block_move_real (func_addr_rtx));
      return 1;
    }

  /* This is the same number of bytes as a memcpy call, but to a different
     less common function name, so this will occasionally use more space.  */
  if (! TARGET_SMALLCODE)
    {
      tree entry_name;
      rtx func_addr_rtx;
      int final_switch, while_loop;
      rtx r4 = gen_rtx (REG, SImode, 4);
      rtx r5 = gen_rtx (REG, SImode, 5);
      rtx r6 = gen_rtx (REG, SImode, 6);

      entry_name = get_identifier ("__movstr");
      func_addr_rtx
	= copy_to_mode_reg (Pmode,
			    gen_rtx (SYMBOL_REF, Pmode,
				     IDENTIFIER_POINTER (entry_name)));
      emit_insn (gen_move_insn (r4, XEXP (operands[0], 0)));
      emit_insn (gen_move_insn (r5, XEXP (operands[1], 0)));

      /* r6 controls the size of the move.  16 is decremented from it
	 for each 64 bytes moved.  Then the negative bit left over is used
	 as an index into a list of move instructions.  e.g., a 72 byte move
	 would be set up with size(r6) = 14, for one iteration through the
	 big while loop, and a switch of -2 for the last part.  */

      final_switch = 16 - ((bytes / 4) % 16);
      while_loop = ((bytes / 4) / 16 - 1) * 16;
      emit_insn (gen_move_insn (r6, GEN_INT (while_loop + final_switch)));
      emit_insn (gen_block_lump_real (func_addr_rtx));
      return 1;
    }

  return 0;
}

/* Prepare operands for a move define_expand; specifically, one of the
   operands must be in a register.  */

int
prepare_move_operands (operands, mode)
     rtx operands[];
     enum machine_mode mode;
{
  /* Copy the source to a register if both operands aren't registers.  */
  if (! reload_in_progress && ! reload_completed
      && ! register_operand (operands[0], mode)
      && ! register_operand (operands[1], mode))
    operands[1] = copy_to_mode_reg (mode, operands[1]);

  return 0;
}

/* Prepare the operands for an scc instruction; make sure that the
   compare has been done.  */
rtx
prepare_scc_operands (code)
     enum rtx_code code;
{
  rtx t_reg = gen_rtx (REG, SImode, T_REG);
  enum rtx_code oldcode = code;
  enum machine_mode mode;

  /* First need a compare insn.  */
  switch (code)
    {
    case NE:
      /* It isn't possible to handle this case.  */
      abort ();
    case LT:
      code = GT;
      break;
    case LE:
      code = GE;
      break;
    case LTU:
      code = GTU;
      break;
    case LEU:
      code = GEU;
      break;
    }
  if (code != oldcode)
    {
      rtx tmp = sh_compare_op0;
      sh_compare_op0 = sh_compare_op1;
      sh_compare_op1 = tmp;
    }

  mode = GET_MODE (sh_compare_op0);
  if (mode == VOIDmode)
    mode = GET_MODE (sh_compare_op1);

  sh_compare_op0 = force_reg (mode, sh_compare_op0);
  if (code != EQ && code != NE
      && (sh_compare_op1 != const0_rtx
	  || code == GTU  || code == GEU || code == LTU || code == LEU))
    sh_compare_op1 = force_reg (mode, sh_compare_op1);

  /* ??? This should be `mode' not `SImode' in the compare, but that would
     require fixing the branch patterns too.  */
  emit_insn (gen_rtx (SET, VOIDmode, t_reg,
		      gen_rtx (code, SImode, sh_compare_op0,
			       sh_compare_op1)));

  return t_reg;
}

/* Called from the md file, set up the operands of a compare instruction.  */

void
from_compare (operands, code)
     rtx *operands;
     int code;
{
  if (code != EQ && code != NE)
    {
      enum machine_mode mode = GET_MODE (sh_compare_op0);
      if (mode == VOIDmode)
	mode = GET_MODE (sh_compare_op1);

      /* Force args into regs, since we can't use constants here.  */
      sh_compare_op0 = force_reg (mode, sh_compare_op0);
      if (sh_compare_op1 != const0_rtx
	  || code == GTU  || code == GEU || code == LTU || code == LEU)
	sh_compare_op1 = force_reg (mode, sh_compare_op1);
    }
  operands[1] = sh_compare_op0;
  operands[2] = sh_compare_op1;
}

/* Functions to output assembly code.  */

/* Return a sequence of instructions to perform DI or DF move.

   Since the SH cannot move a DI or DF in one instruction, we have
   to take care when we see overlapping source and dest registers.  */

char *
output_movedouble (insn, operands, mode)
     rtx insn;
     rtx operands[];
     enum machine_mode mode;
{
  rtx dst = operands[0];
  rtx src = operands[1];

  if (GET_CODE (dst) == MEM
      && GET_CODE (XEXP (dst, 0)) == PRE_DEC)
    return "mov.l	%T1,%0\n\tmov.l	%1,%0";

  if (register_operand (dst, mode)
      && register_operand (src, mode))
    {
      if (REGNO (src) == MACH_REG)
	return "sts	mach,%S0\n\tsts	macl,%R0";

      /* When mov.d r1,r2 do r2->r3 then r1->r2;
         when mov.d r1,r0 do r1->r0 then r2->r1.  */

      if (REGNO (src) + 1 == REGNO (dst))
	return "mov	%T1,%T0\n\tmov	%1,%0";
      else
	return "mov	%1,%0\n\tmov	%T1,%T0";
    }
  else if (GET_CODE (src) == CONST_INT)
    {
      if (INTVAL (src) < 0)
	output_asm_insn ("mov	#-1,%S0", operands);
      else
	output_asm_insn ("mov	#0,%S0", operands);

      return "mov	%1,%R0";
    }
  else if (GET_CODE (src) == MEM)
    {
      int ptrreg = -1;
      int dreg = REGNO (dst);
      rtx inside = XEXP (src, 0);

      if (GET_CODE (inside) == REG)
	ptrreg = REGNO (inside);
      else if (GET_CODE (inside) == SUBREG)
	ptrreg = REGNO (SUBREG_REG (inside)) + SUBREG_WORD (inside);
      else if (GET_CODE (inside) == PLUS)
	{
	  ptrreg = REGNO (XEXP (inside, 0));
	  /* ??? A r0+REG address shouldn't be possible here, because it isn't
	     an offsettable address.  Unfortunately, offsettable addresses use
	     QImode to check the offset, and a QImode offsettable address
	     requires r0 for the other operand, which is not currently
	     supported, so we can't use the 'o' constraint.
	     Thus we must check for and handle r0+REG addresses here.
	     We punt for now, since this is likely very rare.  */
	  if (GET_CODE (XEXP (inside, 1)) == REG)
	    abort ();
	}
      else if (GET_CODE (inside) == LABEL_REF)
	return "mov.l	%1,%0\n\tmov.l	%1+4,%T0";
      else if (GET_CODE (inside) == POST_INC)
	return "mov.l	%1,%0\n\tmov.l	%1,%T0";
      else
	abort ();

      /* Work out the safe way to copy.  Copy into the second half first.  */
      if (dreg == ptrreg)
	return "mov.l	%T1,%T0\n\tmov.l	%1,%0";
    }

  return "mov.l	%1,%0\n\tmov.l	%T1,%T0";
}

/* Print an instruction which would have gone into a delay slot after
   another instruction, but couldn't because the other instruction expanded
   into a sequence where putting the slot insn at the end wouldn't work.  */

static void
print_slot (insn)
     rtx insn;
{
  final_scan_insn (XVECEXP (insn, 0, 1), asm_out_file, optimize, 0, 1);

  INSN_DELETED_P (XVECEXP (insn, 0, 1)) = 1;
}

/* We can't tell if we need a register as a scratch for the jump
   until after branch shortening, and then it's too late to allocate a
   register the 'proper' way.  These instruction sequences are rare
   anyway, so to avoid always using a reg up from our limited set, we'll
   grab one when we need one on output.  */

/* ??? Should fix compiler so that using a clobber scratch in jump
   instructions works, and then this will be unnecessary.  */

char *
output_far_jump (insn, op)
     rtx insn;
     rtx op;
{
  rtx thislab = gen_label_rtx ();

  /* Output the delay slot insn first if any.  */
  if (dbr_sequence_length ())
    print_slot (final_sequence);

  output_asm_insn ("mov.l	r13,@-r15", 0);
  output_asm_insn ("mov.l	%O0,r13", &thislab);
  output_asm_insn ("jmp	@r13", 0);
  output_asm_insn ("mov.l	@r15+,r13", 0);
  output_asm_insn (".align	2", 0);
  ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "L", CODE_LABEL_NUMBER (thislab));
  output_asm_insn (".long	%O0", &op);
  return "";
}

/* Local label counter, used for constants in the pool and inside
   pattern branches.  */

static int lf = 100;

/* Output code for ordinary branches.  */

char *
output_branch (logic, insn, operands)
     int logic;
     rtx insn;
     rtx *operands;
{
  int label = lf++;

  switch (get_attr_length (insn))
    {
    case 2:
      /* A branch with an unfilled delay slot.  */
    case 4:
      /* Simple branch in range -252..+258 bytes */
      return logic ? "bt%.	%l0" : "bf%.	%l0";

    case 6:
      /* A branch with an unfilled delay slot.  */
    case 8:
      /* Branch in range -4092..+4098 bytes.  */
      {
	/* The call to print_slot will clobber the operands.  */
	rtx op0 = operands[0];

	/* If the instruction in the delay slot is annulled (true), then
	   there is no delay slot where we can put it now.  The only safe
	   place for it is after the label.  */

	if (final_sequence)
	  {
	    fprintf (asm_out_file, "\tb%c%s\tLF%d\n", logic ? 'f' : 't',
		     INSN_ANNULLED_BRANCH_P (XVECEXP (final_sequence, 0, 0))
		     ? "" : ".s", label);
	    if (! INSN_ANNULLED_BRANCH_P (XVECEXP (final_sequence, 0, 0)))
	      print_slot (final_sequence);
	  }
	else
	  fprintf (asm_out_file, "\tb%c\tLF%d\n", logic ? 'f' : 't', label);

	output_asm_insn ("bra	%l0", &op0);
	fprintf (asm_out_file, "\tnop\n");
	fprintf (asm_out_file, "LF%d:\n", label);

	if (final_sequence
	    && INSN_ANNULLED_BRANCH_P (XVECEXP (final_sequence, 0, 0)))
	  print_slot (final_sequence);
      }
      return "";

    case 16:
      /* A branch with an unfilled delay slot.  */
    case 18:
      /* Branches a long way away.  */
      {
	/* The call to print_slot will clobber the operands.  */
	rtx op0 = operands[0];

	/* If the instruction in the delay slot is annulled (true), then
	   there is no delay slot where we can put it now.  The only safe
	   place for it is after the label.  */

	if (final_sequence)
	  {
	    fprintf (asm_out_file, "\tb%c%s\tLF%d\n", logic ? 'f' : 't',
		     INSN_ANNULLED_BRANCH_P (XVECEXP (final_sequence, 0, 0))
		     ? "" : ".s", label);
	    if (! INSN_ANNULLED_BRANCH_P (XVECEXP (final_sequence, 0, 0)))
	      print_slot (final_sequence);
	  }
	else
	  fprintf (asm_out_file, "\tb%c\tLF%d\n", logic ? 'f' : 't', label);

	output_far_jump (insn, op0);
	fprintf (asm_out_file, "LF%d:\n", label);

	if (final_sequence
	    && INSN_ANNULLED_BRANCH_P (XVECEXP (final_sequence, 0, 0)))
	  print_slot (final_sequence);
      }
      return "";
    }
  return "bad";
}

/* A copy of the option structure defined in toplev.c.  */

struct option
{
  char *string;
  int *variable;
  int on_value;
};

/* Output a single output option string NAME to FILE, without generating
   lines longer than MAX.  */

static int
output_option (file, sep, type, name, indent, pos, max)
     FILE *file;
     char *sep;
     char *type;
     char *name;
     char *indent;
     int pos;
     int max;
{
  if (strlen (sep) + strlen (type) + strlen (name) + pos > max)
    {
      fprintf (file, indent);
      return fprintf (file, "%s%s", type, name);
    }
  return pos + fprintf (file, "%s%s%s", sep, type, name);
}

/* A copy of the target_switches variable in toplev.c.  */

static struct
{
  char *name;
  int value;
} m_options[] = TARGET_SWITCHES;

/* Output all options to the assembly language file.  */

static void
output_options (file, f_options, f_len, W_options, W_len,
		pos, max, sep, indent, term)
     FILE *file;
     struct option *f_options;
     struct option *W_options;
     int f_len, W_len;
     int pos;
     int max;
     char *sep;
     char *indent;
     char *term;
{
  register int j;

  if (optimize)
    pos = output_option (file, sep, "-O", "", indent, pos, max);
  if (write_symbols != NO_DEBUG)
    pos = output_option (file, sep, "-g", "", indent, pos, max);
  if (profile_flag)
    pos = output_option (file, sep, "-p", "", indent, pos, max);
  if (profile_block_flag)
    pos = output_option (file, sep, "-a", "", indent, pos, max);

  for (j = 0; j < f_len; j++)
    if (*f_options[j].variable == f_options[j].on_value)
      pos = output_option (file, sep, "-f", f_options[j].string,
			   indent, pos, max);

  for (j = 0; j < W_len; j++)
    if (*W_options[j].variable == W_options[j].on_value)
      pos = output_option (file, sep, "-W", W_options[j].string,
			   indent, pos, max);

  for (j = 0; j < sizeof m_options / sizeof m_options[0]; j++)
    if (m_options[j].name[0] != '\0'
	&& m_options[j].value > 0
	&& ((m_options[j].value & target_flags)
	    == m_options[j].value))
      pos = output_option (file, sep, "-m", m_options[j].name,
			   indent, pos, max);

  fprintf (file, term);
}

/* Output to FILE the start of the assembler file.  */

void
output_file_start (file, f_options, f_len, W_options, W_len)
     FILE *file;
     struct option *f_options;
     struct option *W_options;
     int f_len, W_len;
{
  register int pos;

  output_file_directive (file, main_input_filename);

  /* Switch to the data section so that the coffsem symbol and the
     gcc2_compiled. symbol aren't in the text section.  */
  data_section ();

  pos = fprintf (file, "\n! Hitachi SH cc1 (%s) arguments:", version_string);
  output_options (file, f_options, f_len, W_options, W_len,
		  pos, 75, " ", "\n! ", "\n\n");

  if (TARGET_LITTLE_ENDIAN)
    fprintf (file, "\t.little\n");
}

/* Actual number of instructions used to make a shift by N.  */
static char ashiftrt_insns[] =
  { 0,1,2,3,4,5,8,8,8,8,8,8,8,8,8,8,2,3,4,5,8,8,8,8,8,8,8,8,8,8,8,2};

/* Left shift and logical right shift are the same.  */
static char shift_insns[]    =
  { 0,1,1,2,2,3,3,4,1,2,2,3,3,4,3,3,1,2,2,3,3,4,3,3,2,3,3,4,4,4,3,3};

/* Individual shift amounts needed to get the above length sequences.
   One bit right shifts clobber the T bit, so when possible, put one bit
   shifts in the middle of the sequence, so the ends are eligible for
   branch delay slots.  */
static short shift_amounts[32][5] = {
  {0}, {1}, {2}, {2, 1},
  {2, 2}, {2, 1, 2}, {2, 2, 2}, {2, 2, 1, 2},
  {8}, {8, 1}, {8, 2}, {8, 1, 2},
  {8, 2, 2}, {8, 2, 1, 2}, {8, -2, 8}, {8, -1, 8},
  {16}, {16, 1}, {16, 2}, {16, 1, 2},
  {16, 2, 2}, {16, 2, 1, 2}, {16, -2, 8}, {16, -1, 8},
  {16, 8}, {16, 1, 8}, {16, 8, 2}, {16, 8, 1, 2},
  {16, 8, 2, 2}, {16, -1, -2, 16}, {16, -2, 16}, {16, -1, 16}};

/* This is used in length attributes in sh.md to help compute the length
   of arbitrary constant shift instructions.  */

int
shift_insns_rtx (insn)
     rtx insn;
{
  rtx set_src = SET_SRC (XVECEXP (PATTERN (insn), 0, 0));
  int shift_count = INTVAL (XEXP (set_src, 1));
  enum rtx_code shift_code = GET_CODE (set_src);

  switch (shift_code)
    {
    case ASHIFTRT:
      return ashiftrt_insns[shift_count];
    case LSHIFTRT:
    case ASHIFT:
      return shift_insns[shift_count];
    default:
      abort();
    }
}

/* Return the cost of a shift.  */

int
shiftcosts (x)
     rtx x;
{
  int value = INTVAL (XEXP (x, 1));

  /* If shift by a non constant, then this will be expensive.  */
  if (GET_CODE (XEXP (x, 1)) != CONST_INT)
    {
      if (TARGET_SH3)
	return 2;
      /* If not an sh3 then we don't even have an instruction for it.  */
      return 20;
    }

  /* Otherwise, return the true cost in instructions.  */
  if (GET_CODE (x) == ASHIFTRT)
    {
      int cost = ashiftrt_insns[value];
      /* If SH3, then we put the constant in a reg and use shad.  */
      if (TARGET_SH3 && cost > 3)
	cost = 3;
      return cost;
    }
  else
    return shift_insns[value];
}

/* Return the cost of an AND operation.  */

int
andcosts (x)
     rtx x;
{
  int i;

  /* Anding with a register is a single cycle and instruction.  */
  if (GET_CODE (XEXP (x, 1)) != CONST_INT)
    return 1;

  i = INTVAL (XEXP (x, 1));
  /* These constants are single cycle extu.[bw] instructions.  */
  if (i == 0xff || i == 0xffff)
    return 1;
  /* Constants that can be used in an and immediate instruction is a single
     cycle, but this requires r0, so make it a little more expensive.  */
  if (CONST_OK_FOR_L (i))
    return 2;
  /* Constants that can be loaded with a mov immediate and an and.
     This case is probably unnecessary.  */
  if (CONST_OK_FOR_I (i))
    return 2;
  /* Any other constants requires a 2 cycle pc-relative load plus an and.
     This case is probably unnecessary.  */
  return 3;
}

/* Return the cost of a multiply.  */
int
multcosts (x)
     rtx x;
{
  if (TARGET_SH2)
    {
      /* We have a mul insn, so we can never take more than the mul and the
	 read of the mac reg, but count more because of the latency and extra
	 reg usage.  */
      if (TARGET_SMALLCODE)
	return 2;
      return 3;
    }

  /* If we're aiming at small code, then just count the number of
     insns in a multiply call sequence.  */
  if (TARGET_SMALLCODE)
    return 5;

  /* Otherwise count all the insns in the routine we'd be calling too.  */
  return 20;
}

/* Code to expand a shift.  */

void
gen_ashift (type, n, reg)
     int type;
     int n;
     rtx reg;
{
  /* Negative values here come from the shift_amounts array.  */
  if (n < 0)
    {
      if (type == ASHIFT)
	type = LSHIFTRT;
      else
	type = ASHIFT;
      n = -n;
    }

  switch (type)
    {
    case ASHIFTRT:
      emit_insn (gen_ashrsi3_k (reg, reg, GEN_INT (n)));
      break;
    case LSHIFTRT:
      if (n == 1)
	emit_insn (gen_lshrsi3_m (reg, reg, GEN_INT (n)));
      else
	emit_insn (gen_lshrsi3_k (reg, reg, GEN_INT (n)));
      break;
    case ASHIFT:
      emit_insn (gen_ashlsi3_k (reg, reg, GEN_INT (n)));
      break;
    }
}

/* Output RTL to split a constant shift into its component SH constant
   shift instructions.  */
   
int
gen_shifty_op (code, operands)
     int code;
     rtx *operands;
{
  int value = INTVAL (operands[2]);
  int max, i;

  if (value == 31)
    {
      if (code == LSHIFTRT)
	{
	  emit_insn (gen_rotlsi3_1 (operands[0], operands[0]));
	  emit_insn (gen_movt (operands[0]));
	  return;
	}
      else if (code == ASHIFT)
	{
	  /* There is a two instruction sequence for 31 bit left shifts,
	     but it requires r0.  */
	  if (GET_CODE (operands[0]) == REG && REGNO (operands[0]) == 0)
	    {
	      emit_insn (gen_andsi3 (operands[0], operands[0], const1_rtx));
	      emit_insn (gen_rotlsi3_31 (operands[0], operands[0]));
	      return;
	    }
	}
    }
  else if (value == 0)
    {
      /* This can happen when not optimizing.  We must output something here
	 to prevent the compiler from aborting in final.c after the try_split
	 call.  */
      emit_insn (gen_nop ());
      return;
    }

  max = shift_insns[value];
  for (i = 0; i < max; i++)
    gen_ashift (code, shift_amounts[value][i], operands[0]);
}

/* Output RTL for an arithmetic right shift.  */

/* ??? Rewrite to use super-optimizer sequences.  */

int
expand_ashiftrt (operands)
     rtx *operands;
{
  rtx wrk;
  char func[18];
  tree func_name;
  int value;

  if (TARGET_SH3)
    {
      if (GET_CODE (operands[2]) != CONST_INT)
	{
	  rtx count = copy_to_mode_reg (SImode, operands[2]);
	  emit_insn (gen_negsi2 (count, count));
	  emit_insn (gen_ashrsi3_d (operands[0], operands[1], count));
	  return 1;
	}
      else if (ashiftrt_insns[INTVAL (operands[2])] > 3)
	{
	  rtx count = force_reg (SImode, GEN_INT (- INTVAL (operands[2])));
	  emit_insn (gen_ashrsi3_d (operands[0], operands[1], count));
	  return 1;
	}
    }
  if (GET_CODE (operands[2]) != CONST_INT)
    return 0;

  value = INTVAL (operands[2]);

  if (value == 31)
    {
      emit_insn (gen_ashrsi2_31 (operands[0], operands[1]));
      return 1;
    }
  else if (value >= 16 && value <= 19)
    {
      wrk = gen_reg_rtx (SImode);
      emit_insn (gen_ashrsi2_16 (wrk, operands[1]));
      value -= 16;
      while (value--)
	gen_ashift (ASHIFTRT, 1, wrk);
      emit_move_insn (operands[0], wrk);
      return 1;
    }
  /* Expand a short sequence inline, longer call a magic routine.  */
  else if (value <= 5)
    {
      wrk = gen_reg_rtx (SImode);
      emit_move_insn (wrk, operands[1]);
      while (value--)
	gen_ashift (ASHIFTRT, 1, wrk);
      emit_move_insn (operands[0], wrk);
      return 1;
    }

  wrk = gen_reg_rtx (Pmode);

  /* Load the value into an arg reg and call a helper.  */
  emit_move_insn (gen_rtx (REG, SImode, 4), operands[1]);
  sprintf (func, "__ashiftrt_r4_%d", value);
  func_name = get_identifier (func);
  emit_move_insn (wrk, gen_rtx (SYMBOL_REF, Pmode,
				IDENTIFIER_POINTER (func_name)));
  emit_insn (gen_ashrsi3_n (GEN_INT (value), wrk));
  emit_move_insn (operands[0], gen_rtx (REG, SImode, 4));
  return 1;
}

/* The SH cannot load a large constant into a register, constants have to
   come from a pc relative load.  The reference of a pc relative load
   instruction must be less than 1k infront of the instruction.  This
   means that we often have to dump a constant inside a function, and
   generate code to branch around it.

   It is important to minimize this, since the branches will slow things
   down and make things bigger.

   Worst case code looks like:

   mov.l L1,rn
   bra   L2
   nop
   align
   L1:   .long value
   L2:
   ..

   mov.l L3,rn
   bra   L4
   nop
   align
   L3:   .long value
   L4:
   ..

   We fix this by performing a scan before scheduling, which notices which
   instructions need to have their operands fetched from the constant table
   and builds the table.

   The algorithm is:

   scan, find an instruction which needs a pcrel move.  Look forward, find the
   last barrier which is within MAX_COUNT bytes of the requirement.
   If there isn't one, make one.  Process all the instructions between
   the find and the barrier.

   In the above example, we can tell that L3 is within 1k of L1, so
   the first move can be shrunk from the 3 insn+constant sequence into
   just 1 insn, and the constant moved to L3 to make:

   mov.l        L1,rn
   ..
   mov.l        L3,rn
   bra          L4
   nop
   align
   L3:.long value
   L4:.long value

   Then the second move becomes the target for the shortening process.  */

typedef struct
{
  rtx value;			/* Value in table.  */
  rtx label;			/* Label of value.  */
  enum machine_mode mode;	/* Mode of value.  */
} pool_node;

/* The maximum number of constants that can fit into one pool, since
   the pc relative range is 0...1020 bytes and constants are at least 4
   bytes long.  */

#define MAX_POOL_SIZE (1020/4)
static pool_node pool_vector[MAX_POOL_SIZE];
static int pool_size;

/* ??? If we need a constant in HImode which is the truncated value of a
   constant we need in SImode, we could combine the two entries thus saving
   two bytes.  Is this common enough to be worth the effort of implementing
   it?  */

/* ??? This stuff should be done at the same time that we shorten branches.
   As it is now, we must assume that all branches are the maximum size, and
   this causes us to almost always output constant pools sooner than
   necessary.  */

/* Add a constant to the pool and return its label.  */

static rtx
add_constant (x, mode)
     rtx x;
     enum machine_mode mode;
{
  int i;
  rtx lab;

  /* First see if we've already got it.  */
  for (i = 0; i < pool_size; i++)
    {
      if (x->code == pool_vector[i].value->code
	  && mode == pool_vector[i].mode)
	{
	  if (x->code == CODE_LABEL)
	    {
	      if (XINT (x, 3) != XINT (pool_vector[i].value, 3))
		continue;
	    }
	  if (rtx_equal_p (x, pool_vector[i].value))
	    return pool_vector[i].label;
	}
    }

  /* Need a new one.  */
  pool_vector[pool_size].value = x;
  lab = gen_label_rtx ();
  pool_vector[pool_size].mode = mode;
  pool_vector[pool_size].label = lab;
  pool_size++;
  return lab;
}

/* Output the literal table.  */

static void
dump_table (scan)
     rtx scan;
{
  int i;
  int need_align = 1;

  /* Do two passes, first time dump out the HI sized constants.  */

  for (i = 0; i < pool_size; i++)
    {
      pool_node *p = &pool_vector[i];

      if (p->mode == HImode)
	{
	  if (need_align)
	    {
	      scan = emit_insn_after (gen_align_2 (), scan);
	      need_align = 0;
	    }
	  scan = emit_label_after (p->label, scan);
	  scan = emit_insn_after (gen_consttable_2 (p->value), scan);
	}
    }

  need_align = 1;

  for (i = 0; i < pool_size; i++)
    {
      pool_node *p = &pool_vector[i];

      switch (p->mode)
	{
	case HImode:
	  break;
	case SImode:
	  if (need_align)
	    {
	      need_align = 0;
	      scan = emit_label_after (gen_label_rtx (), scan);
	      scan = emit_insn_after (gen_align_4 (), scan);
	    }
	  scan = emit_label_after (p->label, scan);
	  scan = emit_insn_after (gen_consttable_4 (p->value), scan);
	  break;
	case DImode:
	  if (need_align)
	    {
	      need_align = 0;
	      scan = emit_label_after (gen_label_rtx (), scan);
	      scan = emit_insn_after (gen_align_4 (), scan);
	    }
	  scan = emit_label_after (p->label, scan);
	  scan = emit_insn_after (gen_consttable_8 (p->value), scan);
	  break;
	default:
	  abort ();
	  break;
	}
    }

  scan = emit_insn_after (gen_consttable_end (), scan);
  scan = emit_barrier_after (scan);
  pool_size = 0;
}

/* Return non-zero if constant would be an ok source for a
   mov.w instead of a mov.l.  */

static int
hi_const (src)
     rtx src;
{
  return (GET_CODE (src) == CONST_INT
	  && INTVAL (src) >= -32768
	  && INTVAL (src) <= 32767);
}

/* Non-zero if the insn is a move instruction which needs to be fixed.  */

/* ??? For a DImode/DFmode moves, we don't need to fix it if each half of the
   CONST_DOUBLE input value is CONST_OK_FOR_I.  For a SFmode move, we don't
   need to fix it if the input value is CONST_OK_FOR_I.  */

static int
broken_move (insn)
     rtx insn;
{
  if (GET_CODE (insn) == INSN
      && GET_CODE (PATTERN (insn)) == SET
      /* We can load any 8 bit value if we don't care what the high
	 order bits end up as.  */
      && GET_MODE (SET_DEST (PATTERN (insn))) != QImode
      && CONSTANT_P (SET_SRC (PATTERN (insn)))
      && ! (GET_CODE (SET_SRC (PATTERN (insn))) == CONST_DOUBLE
	    && (fp_zero_operand (SET_SRC (PATTERN (insn)))
		|| fp_one_operand (SET_SRC (PATTERN (insn))))
	    && GET_CODE (SET_DEST (PATTERN (insn))) == REG
	    && REGNO (SET_DEST (PATTERN (insn))) >= FIRST_FP_REG
	    && REGNO (SET_DEST (PATTERN (insn))) <= LAST_FP_REG)
      && (GET_CODE (SET_SRC (PATTERN (insn))) != CONST_INT
	  || ! CONST_OK_FOR_I (INTVAL (SET_SRC (PATTERN (insn))))))
    return 1;

  return 0;
}

/* Find the last barrier from insn FROM which is close enough to hold the
   constant pool.  If we can't find one, then create one near the end of
   the range.  */

/* ??? It would be good to put constant pool tables between a case jump and
   the jump table.  This fails for two reasons.  First, there is no
   barrier after the case jump.  This is a bug in the casesi pattern.
   Second, inserting the table here may break the mova instruction that
   loads the jump table address, by moving the jump table too far away.
   We fix that problem by never outputting the constant pool between a mova
   and its label.  */

static rtx
find_barrier (from)
     rtx from;
{
  int count_si = 0;
  int count_hi = 0;
  int found_hi = 0;
  int found_si = 0;
  rtx found_barrier = 0;
  rtx found_mova = 0;
  int si_limit;
  int hi_limit;

  /* For HImode: range is 510, add 4 because pc counts from address of
     second instruction after this one, subtract 2 for the jump instruction
     that we may need to emit before the table, subtract 2 for the instruction
     that fills the jump delay slot (in very rare cases, reorg will take an
     instruction from after the constant pool or will leave the delay slot
     empty).  This gives 510.
     For SImode: range is 1020, add 4 because pc counts from address of
     second instruction after this one, subtract 2 in case pc is 2 byte
     aligned, subtract 2 for the jump instruction that we may need to emit
     before the table, subtract 2 for the instruction that fills the jump
     delay slot.  This gives 1018.  */

  /* If not optimizing, then it is possible that the jump instruction we add
     won't be shortened, and thus will have a length of 14 instead of 2.
     We must adjust the limits downwards to account for this, giving a limit
     of 1008 for SImode and 500 for HImode.  */

  if (optimize)
    {
      si_limit = 1018;
      hi_limit = 510;
    }
  else
    {
      si_limit = 1008;
      hi_limit = 500;
    }

  while (from && count_si < si_limit && count_hi < hi_limit)
    {
      int inc = get_attr_length (from);

      if (GET_CODE (from) == BARRIER)
	found_barrier = from;

      if (broken_move (from))
	{
	  rtx pat = PATTERN (from);
	  rtx src = SET_SRC (pat);
	  rtx dst = SET_DEST (pat);
	  enum machine_mode mode = GET_MODE (dst);

	  /* We must explicitly check the mode, because sometimes the
	     front end will generate code to load unsigned constants into
	     HImode targets without properly sign extending them.  */
	  if (mode == HImode || (mode == SImode && hi_const (src)))
	    {
	      found_hi = 1;
	      /* We put the short constants before the long constants, so
		 we must count the length of short constants in the range
		 for the long constants.  */
	      /* ??? This isn't optimal, but is easy to do.  */
	      if (found_si)
		count_si += 2;
	    }
	  else
	    found_si = 1;
	}

      if (GET_CODE (from) == INSN
	  && GET_CODE (PATTERN (from)) == SET
	  && GET_CODE (SET_SRC (PATTERN (from))) == UNSPEC
	  && XINT (SET_SRC (PATTERN (from)), 1) == 1)
	found_mova = from;
      else if (GET_CODE (from) == JUMP_INSN
	       && (GET_CODE (PATTERN (from)) == ADDR_VEC
		   || GET_CODE (PATTERN (from)) == ADDR_DIFF_VEC))
	found_mova = 0;

      if (found_si)
	count_si += inc;
      if (found_hi)
	count_hi += inc;
      from = NEXT_INSN (from);
    }

  /* Insert the constant pool table before the mova instruction, to prevent
     the mova label reference from going out of range.  */
  if (found_mova)
    from = found_mova;

  if (! found_barrier)
    {
      /* We didn't find a barrier in time to dump our stuff,
	 so we'll make one.  */
      rtx label = gen_label_rtx ();

      /* If we exceeded the range, then we must back up over the last
	 instruction we looked at.  Otherwise, we just need to undo the
	 NEXT_INSN at the end of the loop.  */
      if (count_hi > hi_limit || count_si > si_limit)
	from = PREV_INSN (PREV_INSN (from));
      else
	from = PREV_INSN (from);

      /* Walk back to be just before any jump or label.
	 Putting it before a label reduces the number of times the branch
	 around the constant pool table will be hit.  Putting it before
	 a jump makes it more likely that the bra delay slot will be
	 filled.  */
      while (GET_CODE (from) == JUMP_INSN || GET_CODE (from) == NOTE
	     || GET_CODE (from) == CODE_LABEL)
	from = PREV_INSN (from);

      from = emit_jump_insn_after (gen_jump (label), from);
      JUMP_LABEL (from) = label;
      LABEL_NUSES (label) = 1;
      found_barrier = emit_barrier_after (from);
      emit_label_after (label, found_barrier);
    }

  return found_barrier;
}

/* See if the only way in which INSN uses REG is by calling it, or by
   setting it while calling it.  Set *SET to a SET rtx if the register
   is set by INSN.  */

static int
noncall_uses_reg (reg, insn, set)
     rtx reg;
     rtx insn;
     rtx *set;
{
  rtx pattern;

  *set = NULL_RTX;

  if (GET_CODE (insn) != CALL_INSN)
    {
      /* We don't use rtx_equal_p because we don't care if the mode is
	 different.  */
      pattern = single_set (insn);
      if (pattern
	  && GET_CODE (SET_DEST (pattern)) == REG
	  && REGNO (reg) == REGNO (SET_DEST (pattern)))
	{
	  *set = pattern;
	  return 0;
	}

      return 1;
    }

  pattern = PATTERN (insn);

  if (GET_CODE (pattern) == PARALLEL)
    {
      int i;

      for (i = XVECLEN (pattern, 0) - 1; i >= 1; i--)
	if (reg_mentioned_p (reg, XVECEXP (pattern, 0, i)))
	  return 1;
      pattern = XVECEXP (pattern, 0, 0);
    }

  if (GET_CODE (pattern) == SET)
    {
      if (reg_mentioned_p (reg, SET_DEST (pattern)))
	{
	  /* We don't use rtx_equal_p, because we don't care if the
             mode is different.  */
	  if (GET_CODE (SET_DEST (pattern)) != REG
	      || REGNO (reg) != REGNO (SET_DEST (pattern)))
	    return 1;

	  *set = pattern;
	}

      pattern = SET_SRC (pattern);
    }

  if (GET_CODE (pattern) != CALL
      || GET_CODE (XEXP (pattern, 0)) != MEM
      || ! rtx_equal_p (reg, XEXP (XEXP (pattern, 0), 0)))
    return 1;

  return 0;
}

/* Exported to toplev.c.

   Do a final pass over the function, just before delayed branch
   scheduling.  */

void
machine_dependent_reorg (first)
     rtx first;
{
  rtx insn;

  /* If relaxing, generate pseudo-ops to associate function calls with
     the symbols they call.  It does no harm to not generate these
     pseudo-ops.  However, when we can generate them, it enables to
     linker to potentially relax the jsr to a bsr, and eliminate the
     register load and, possibly, the constant pool entry.  */

  if (TARGET_RELAX)
    {
      /* Remove all REG_LABEL notes.  We want to use them for our own
	 purposes.  This works because none of the remaining passes
	 need to look at them.

	 ??? But it may break in the future.  We should use a machine
	 dependent REG_NOTE, or some other approach entirely.  */
      for (insn = first; insn; insn = NEXT_INSN (insn))
	{
	  if (GET_RTX_CLASS (GET_CODE (insn)) == 'i')
	    {
	      rtx note;

	      while ((note = find_reg_note (insn, REG_LABEL, NULL_RTX)) != 0)
		remove_note (insn, note);
	    }
	}

      for (insn = first; insn; insn = NEXT_INSN (insn))
	{
	  rtx pattern, reg, link, set, scan, dies, label;
	  int rescan = 0, foundinsn = 0;

	  if (GET_CODE (insn) != CALL_INSN)
	    continue;

	  pattern = PATTERN (insn);

	  if (GET_CODE (pattern) == PARALLEL)
	    pattern = XVECEXP (pattern, 0, 0);
	  if (GET_CODE (pattern) == SET)
	    pattern = SET_SRC (pattern);

	  if (GET_CODE (pattern) != CALL
	      || GET_CODE (XEXP (pattern, 0)) != MEM)
	    continue;

	  reg = XEXP (XEXP (pattern, 0), 0);
	  if (GET_CODE (reg) != REG)
	    continue;

	  /* This is a function call via REG.  If the only uses of REG
	     between the time that it is set and the time that it dies
	     are in function calls, then we can associate all the
	     function calls with the setting of REG.  */

	  for (link = LOG_LINKS (insn); link; link = XEXP (link, 1))
	    {
	      set = single_set (XEXP (link, 0));
	      if (set && rtx_equal_p (reg, SET_DEST (set)))
		{
		  link = XEXP (link, 0);
		  break;
		}
	    }

	  if (! link)
	    {
	      /* ??? Sometimes global register allocation will have
                 deleted the insn pointed to by LOG_LINKS.  Try
                 scanning backward to find where the register is set.  */
	      for (scan = PREV_INSN (insn);
		   scan && GET_CODE (scan) != CODE_LABEL;
		   scan = PREV_INSN (scan))
		{
		  if (GET_RTX_CLASS (GET_CODE (scan)) != 'i')
		    continue;

		  if (! reg_mentioned_p (reg, scan))
		    continue;

		  if (noncall_uses_reg (reg, scan, &set))
		    break;

		  if (set)
		    {
		      link = scan;
		      break;
		    }
		}
	    }

	  if (! link)
	    continue;

	  /* The register is set at LINK.  */

	  /* We can only optimize the function call if the register is
             being set to a symbol.  In theory, we could sometimes
             optimize calls to a constant location, but the assembler
             and linker do not support that at present.  */
	  if (GET_CODE (SET_SRC (set)) != SYMBOL_REF
	      && GET_CODE (SET_SRC (set)) != LABEL_REF)
	    continue;

	  /* Scan forward from LINK to the place where REG dies, and
             make sure that the only insns which use REG are
             themselves function calls.  */

	  /* ??? This doesn't work for call targets that were allocated
	     by reload, since there may not be a REG_DEAD note for the
	     register.  */

	  dies = NULL_RTX;
	  for (scan = NEXT_INSN (link); scan; scan = NEXT_INSN (scan))
	    {
	      rtx scanset;

	      /* Don't try to trace forward past a CODE_LABEL if we haven't
		 seen INSN yet.  Ordinarily, we will only find the setting insn
		 in LOG_LINKS if it is in the same basic block.  However,
		 cross-jumping can insert code labels in between the load and
		 the call, and can result in situations where a single call
		 insn may have two targets depending on where we came from.  */

	      if (GET_CODE (scan) == CODE_LABEL && ! foundinsn)
		break;

	      if (GET_RTX_CLASS (GET_CODE (scan)) != 'i')
		continue;

	      /* Don't try to trace forward past a JUMP.  To optimize
                 safely, we would have to check that all the
                 instructions at the jump destination did not use REG.  */

	      if (GET_CODE (scan) == JUMP_INSN)
		break;

	      if (! reg_mentioned_p (reg, scan))
		continue;

	      if (noncall_uses_reg (reg, scan, &scanset))
		break;

	      if (scan == insn)
		foundinsn = 1;

	      if (scan != insn && GET_CODE (scan) == CALL_INSN)
		{
		  /* There is a function call to this register other
                     than the one we are checking.  If we optimize
                     this call, we need to rescan again below.  */
		  rescan = 1;
		}

	      /* ??? We shouldn't have to worry about SCANSET here.
		 We should just be able to check for a REG_DEAD note
		 on a function call.  However, the REG_DEAD notes are
		 apparently not dependable around libcalls; c-torture
		 execute/920501-2 is a test case.  If SCANSET is set,
		 then this insn sets the register, so it must have
		 died earlier.  Unfortunately, this will only handle
		 the cases in which the register is, in fact, set in a
		 later insn.  */

	      /* ??? We shouldn't have to use FOUNDINSN here.
		 However, the LOG_LINKS fields are apparently not
		 entirely reliable around libcalls;
		 newlib/libm/math/e_pow.c is a test case.  Sometimes
		 an insn will appear in LOG_LINKS even though it is
		 not the most recent insn which sets the register. */

	      if (foundinsn
		  && (scanset
		      || find_reg_note (scan, REG_DEAD, reg)))
		{
		  dies = scan;
		  break;
		}
	    }

	  if (! dies)
	    {
	      /* Either there was a branch, or some insn used REG
                 other than as a function call address.  */
	      continue;
	    }

	  /* Create a code label, and put it in a REG_LABEL note on
             the insn which sets the register, and on each call insn
             which uses the register.  In final_prescan_insn we look
             for the REG_LABEL notes, and output the appropriate label
             or pseudo-op.  */

	  label = gen_label_rtx ();
	  REG_NOTES (link) = gen_rtx (EXPR_LIST, REG_LABEL, label,
				      REG_NOTES (link));
	  REG_NOTES (insn) = gen_rtx (EXPR_LIST, REG_LABEL, label,
				      REG_NOTES (insn));
	  if (rescan)
	    {
	      scan = link;
	      do
		{
		  scan = NEXT_INSN (scan);
		  if (scan != insn
		      && GET_CODE (scan) == CALL_INSN
		      && reg_mentioned_p (reg, scan))
		    REG_NOTES (scan) = gen_rtx (EXPR_LIST, REG_LABEL,
						label, REG_NOTES (scan));
		}
	      while (scan != dies);
	    }
	}
    }

  /* Scan the function looking for move instructions which have to be
     changed to pc-relative loads and insert the literal tables.  */

  for (insn = first; insn; insn = NEXT_INSN (insn))
    {
      if (broken_move (insn))
	{
	  rtx scan;
	  /* Scan ahead looking for a barrier to stick the constant table
	     behind.  */
	  rtx barrier = find_barrier (insn);

	  /* Now find all the moves between the points and modify them.  */
	  for (scan = insn; scan != barrier; scan = NEXT_INSN (scan))
	    {
	      if (broken_move (scan))
		{
		  rtx pat = PATTERN (scan);
		  rtx src = SET_SRC (pat);
		  rtx dst = SET_DEST (pat);
		  enum machine_mode mode = GET_MODE (dst);
		  rtx lab;
		  rtx newinsn;
		  rtx newsrc;

		  if (mode == SImode && hi_const (src))
		    {
		      int offset = 0;

		      mode = HImode;
		      while (GET_CODE (dst) == SUBREG)
			{
			  offset += SUBREG_WORD (dst);
			  dst = SUBREG_REG (dst);
			}
		      dst = gen_rtx (REG, HImode, REGNO (dst) + offset);
		    }

		  lab = add_constant (src, mode);
		  newsrc = gen_rtx (MEM, mode,
				    gen_rtx (LABEL_REF, VOIDmode, lab));
		  RTX_UNCHANGING_P (newsrc) = 1;
		  newinsn = emit_insn_after (gen_rtx (SET, VOIDmode,
						      dst, newsrc), scan);
		  REG_NOTES (newinsn) = REG_NOTES (scan);
		  REG_NOTES (scan) = NULL_RTX;
		  /* If not optimizing, then delete_insn doesn't remove the
		     insn from the chain, and hence is not useful.  We
		     convert the instruction to a NOTE in that case.  */
		  if (optimize)
		    delete_insn (scan);
		  else
		    {
		      PUT_CODE (scan, NOTE);
		      NOTE_LINE_NUMBER (scan) = NOTE_INSN_DELETED;
		      NOTE_SOURCE_FILE (insn) = 0;
		    }
		  scan = newinsn;
		}
	    }
	  dump_table (barrier);
	}
    }
}

/* Dump out instruction addresses, which is useful for debugging the
   constant pool table stuff.

   If relaxing, output the label and pseudo-ops used to link together
   calls and the instruction which set the registers.  */

/* ??? This is unnecessary, and probably should be deleted.  This makes
   the insn_addresses declaration above unnecessary.  */

/* ??? The addresses printed by this routine for insns are nonsense for
   insns which are inside of a sequence where none of the inner insns have
   variable length.  This is because the second pass of shorten_branches
   does not bother to update them.  */

void
final_prescan_insn (insn, opvec, noperands)
     rtx insn;
     rtx *opvec;
     int noperands;
{
  if (TARGET_DUMPISIZE)
    fprintf (asm_out_file, "\n! at %04x\n", insn_addresses[INSN_UID (insn)]);

  if (TARGET_RELAX)
    {
      rtx note;

      note = find_reg_note (insn, REG_LABEL, NULL_RTX);
      if (note)
	{
	  rtx pattern;

	  pattern = PATTERN (insn);
	  if (GET_CODE (pattern) == PARALLEL)
	    pattern = XVECEXP (pattern, 0, 0);
	  if (GET_CODE (pattern) == CALL
	      || (GET_CODE (pattern) == SET
		  && GET_CODE (SET_SRC (pattern)) == CALL))
	    fprintf (asm_out_file, "\t.uses L%d\n",
		     CODE_LABEL_NUMBER (XEXP (note, 0)));
	  else if (GET_CODE (pattern) == SET)
	    ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "L",
				       CODE_LABEL_NUMBER (XEXP (note, 0)));
	  else
	    abort ();
	}
    }
}

/* Dump out any constants accumulated in the final pass.  These will
   will only be labels.  */

char *
output_jump_label_table ()
{
  int i;

  if (pool_size)
    {
      fprintf (asm_out_file, "\t.align 2\n");
      for (i = 0; i < pool_size; i++)
	{
	  pool_node *p = &pool_vector[i];

	  ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "L",
				     CODE_LABEL_NUMBER (p->label));
	  output_asm_insn (".long	%O0", &p->value);
	}
      pool_size = 0;
    }

  return "";
}

/* A full frame looks like:

   arg-5
   arg-4
   [ if current_function_anonymous_args
   arg-3
   arg-2
   arg-1
   arg-0 ]
   saved-fp
   saved-r10
   saved-r11
   saved-r12
   saved-pr
   local-n
   ..
   local-1
   local-0        <- fp points here.  */

/* Number of bytes pushed for anonymous args, used to pass information
   between expand_prologue and expand_epilogue.  */

static int extra_push;

/* Adjust the stack and return the number of bytes taken to do it.  */

static void
output_stack_adjust (size, reg)
     int size;
     rtx reg;
{
  if (size)
    {
      rtx val = GEN_INT (size);
      rtx insn;

      if (! CONST_OK_FOR_I (size))
	{
	  rtx reg = gen_rtx (REG, SImode, 3);
	  emit_insn (gen_movsi (reg, val));
	  val = reg;
	}

      insn = gen_addsi3 (reg, reg, val);
      emit_insn (insn);
    }
}

/* Output RTL to push register RN onto the stack.  */

static void
push (rn)
     int rn;
{
  rtx x;
  if ((rn >= FIRST_FP_REG && rn <= LAST_FP_REG)
      || rn == FPUL_REG)
    x = emit_insn (gen_push_e (gen_rtx (REG, SFmode, rn)));
  else
    x = emit_insn (gen_push (gen_rtx (REG, SImode, rn)));

  REG_NOTES (x) = gen_rtx (EXPR_LIST, REG_INC,
			   gen_rtx(REG, SImode, STACK_POINTER_REGNUM), 0);
}

/* Output RTL to pop register RN from the stack.  */

static void
pop (rn)
     int rn;
{
  rtx x;
  if ((rn >= FIRST_FP_REG && rn <= LAST_FP_REG)
      || rn == FPUL_REG)
    x = emit_insn (gen_pop_e (gen_rtx (REG, SFmode, rn)));
  else
    x = emit_insn (gen_pop (gen_rtx (REG, SImode, rn)));
    
  REG_NOTES (x) = gen_rtx (EXPR_LIST, REG_INC,
			   gen_rtx(REG, SImode, STACK_POINTER_REGNUM), 0);
}

/* Generate code to push the regs specified in the mask, and return
   the number of bytes the insns take.  */

static void
push_regs (mask, mask2)
     int mask, mask2;
{
  int i;

  for (i = 0; i < 32; i++)
    if (mask & (1 << i))
      push (i);
  for (i = 32; i < FIRST_PSEUDO_REGISTER; i++)
    if (mask2 & (1 << (i - 32)))
      push (i);
}

/* Work out the registers which need to be saved, both as a mask and a
   count.

   If doing a pragma interrupt function, then push all regs used by the
   function, and if we call another function (we can tell by looking at PR),
   make sure that all the regs it clobbers are safe too.  */

static int
calc_live_regs (count_ptr, live_regs_mask2)
     int *count_ptr;
     int *live_regs_mask2;
{
  int reg;
  int live_regs_mask = 0;
  int count = 0;

  *live_regs_mask2 = 0;
  for (reg = 0; reg < FIRST_PSEUDO_REGISTER; reg++)
    {
      if (pragma_interrupt && ! pragma_trapa)
	{
	  /* Need to save all the regs ever live.  */
	  if ((regs_ever_live[reg]
	       || (call_used_regs[reg] && regs_ever_live[PR_REG]))
	      && reg != STACK_POINTER_REGNUM && reg != ARG_POINTER_REGNUM
	      && reg != T_REG && reg != GBR_REG)
	    {
	      if (reg >= 32)
		*live_regs_mask2 |= 1 << (reg - 32);
	      else
		live_regs_mask |= 1 << reg;
	      count++;
	    }
	}
      else
	{
	  /* Only push those regs which are used and need to be saved.  */
	  if (regs_ever_live[reg] && ! call_used_regs[reg])
	    {
	      if (reg >= 32)
		*live_regs_mask2 |= 1 << (reg - 32);
	      else
		live_regs_mask |= (1 << reg);
	      count++;
	    }
	}
    }

  *count_ptr = count;
  return live_regs_mask;
}

/* Code to generate prologue and epilogue sequences */

void
sh_expand_prologue ()
{
  int live_regs_mask;
  int d, i;
  int live_regs_mask2;
  live_regs_mask = calc_live_regs (&d, &live_regs_mask2);

  /* We have pretend args if we had an object sent partially in registers
     and partially on the stack, e.g. a large structure.  */
  output_stack_adjust (-current_function_pretend_args_size, stack_pointer_rtx);

  extra_push = 0;

  /* This is set by SETUP_VARARGS to indicate that this is a varargs
     routine.  Clear it here so that the next function isn't affected. */
  if (current_function_anonymous_args)
    {
      current_function_anonymous_args = 0;

      /* This is not used by the SH3E calling convention  */
      if (!TARGET_SH3E)
        {
	  /* Push arg regs as if they'd been provided by caller in stack.  */
	  for (i = 0; i < NPARM_REGS(SImode); i++)
	    {
	      int rn = NPARM_REGS(SImode) + FIRST_PARM_REG - i - 1;
	      if (i > (NPARM_REGS(SImode) 
		       - current_function_args_info.arg_count[(int) SH_ARG_INT]
		       - current_function_varargs))
		break;
	      push (rn);
	      extra_push += 4;
	    }
        }
    }

  push_regs (live_regs_mask, live_regs_mask2);

  output_stack_adjust (-get_frame_size (), stack_pointer_rtx);

  if (frame_pointer_needed)
    emit_insn (gen_movsi (frame_pointer_rtx, stack_pointer_rtx));
}

void
sh_expand_epilogue ()
{
  int live_regs_mask;
  int d, i;

  int live_regs_mask2;
  live_regs_mask = calc_live_regs (&d, &live_regs_mask2);

  if (frame_pointer_needed)
    {
      /* We deliberately make the add dependent on the frame_pointer,
	 to ensure that instruction scheduling won't move the stack pointer
	 adjust before instructions reading from the frame.  This can fail
	 if there is an interrupt which then writes to the stack.  */
      output_stack_adjust (get_frame_size (), frame_pointer_rtx);
      emit_insn (gen_movsi (stack_pointer_rtx, frame_pointer_rtx));
    }
  else
    output_stack_adjust (get_frame_size (), stack_pointer_rtx);

  /* Pop all the registers.  */

  for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
    {
      int j = (FIRST_PSEUDO_REGISTER - 1) - i;
      if (j < 32 && (live_regs_mask & (1 << j)))
	pop (j);
      else if (j >= 32 && (live_regs_mask2 & (1 << (j - 32))))
	pop (j);
    }

  output_stack_adjust (extra_push + current_function_pretend_args_size,
		       stack_pointer_rtx);
}

/* Clear variables at function end.  */

void
function_epilogue (stream, size)
     FILE *stream;
     int size;
{
  pragma_interrupt = pragma_trapa = pragma_nosave_low_regs = 0;
}

rtx
sh_builtin_saveregs (arglist)
     tree arglist;
{
  tree fntype = TREE_TYPE (current_function_decl);
  /* First unnamed integer register.  */
  int first_intreg = current_function_args_info.arg_count[(int) SH_ARG_INT];
  /* Number of integer registers we need to save.  */
  int n_intregs = MAX (0, NPARM_REGS (SImode) - first_intreg);
  /* First unnamed SFmode float reg */
  int first_floatreg = current_function_args_info.arg_count[(int) SH_ARG_FLOAT];
  /* Number of SFmode float regs to save.  */
  int n_floatregs = MAX (0, NPARM_REGS (SFmode) - first_floatreg);
  int ptrsize = GET_MODE_SIZE (Pmode);
  rtx valist, regbuf, fpregs;
  int bufsize, regno;

  /* Allocate block of memory for the regs. */
  /* ??? If n_intregs + n_floatregs == 0, should we allocate at least 1 byte?
     Or can assign_stack_local accept a 0 SIZE argument?  */
  bufsize = (n_intregs * UNITS_PER_WORD) + (n_floatregs * UNITS_PER_WORD);

  regbuf = assign_stack_local (BLKmode, bufsize, 0);
  MEM_IN_STRUCT_P (regbuf) = 1;

  /* Save int args.
     This is optimized to only save the regs that are necessary.  Explicitly
     named args need not be saved.  */
  if (n_intregs > 0)
    move_block_from_reg (BASE_ARG_REG (SImode) + first_intreg,
			 gen_rtx (MEM, BLKmode, 
			 	plus_constant (XEXP (regbuf, 0),
					n_floatregs * UNITS_PER_WORD)), 
			 n_intregs, n_intregs * UNITS_PER_WORD);

  /* Save float args.
     This is optimized to only save the regs that are necessary.  Explicitly
     named args need not be saved.
     We explicitly build a pointer to the buffer because it halves the insn
     count when not optimizing (otherwise the pointer is built for each reg
     saved).  */

  fpregs = gen_reg_rtx (Pmode);
  emit_move_insn (fpregs, XEXP (regbuf, 0));
  for (regno = first_floatreg; regno < NPARM_REGS (SFmode); regno ++)
    emit_move_insn (gen_rtx (MEM, SFmode,
			     plus_constant (fpregs,
					    GET_MODE_SIZE (SFmode)
					    * (regno - first_floatreg))),
		    gen_rtx (REG, SFmode,
			     BASE_ARG_REG (SFmode) + regno));

  /* Return the address of the regbuf.  */
  return XEXP (regbuf, 0);
}

/* Define the offset between two registers, one to be eliminated, and
   the other its replacement, at the start of a routine.  */

int
initial_elimination_offset (from, to)
     int from;
     int to;
{
  int regs_saved;
  int total_saved_regs_space;
  int total_auto_space = get_frame_size ();

  int live_regs_mask2;
  calc_live_regs (&regs_saved, &live_regs_mask2);

  total_saved_regs_space = (regs_saved) * 4;

  if (from == ARG_POINTER_REGNUM && to == FRAME_POINTER_REGNUM)
    return total_saved_regs_space + total_auto_space;

  if (from == ARG_POINTER_REGNUM && to == STACK_POINTER_REGNUM)
    return total_saved_regs_space + total_auto_space;

  /* Initial gap between fp and sp is 0.  */
  if (from == FRAME_POINTER_REGNUM && to == STACK_POINTER_REGNUM)
    return 0;

  abort ();
}

/* Handle machine specific pragmas to be semi-compatible with Hitachi
   compiler.  */

int
handle_pragma (file, t)
     FILE *file;
     tree t;
{
  int retval = 0;
  register char *pname;

  if (TREE_CODE (t) != IDENTIFIER_NODE)
    return 0;

  pname = IDENTIFIER_POINTER (t);
  if (strcmp (pname, "interrupt") == 0)
    pragma_interrupt = retval = 1;
  else if (strcmp (pname, "trapa") == 0)
    pragma_interrupt = pragma_trapa = retval = 1;
  else if (strcmp (pname, "nosave_low_regs") == 0)
    pragma_nosave_low_regs = retval = 1;

  return retval;
}

/* Predicates used by the templates.  */

/* Returns 1 if OP is MACL, MACH or PR.  The input must be a REG rtx.
   Used only in general_movsrc_operand.  */

int
system_reg_operand (op, mode)
     rtx op;
     enum machine_mode mode;
{
  switch (REGNO (op))
    {
    case PR_REG:
    case MACL_REG:
    case MACH_REG:
      return 1;
    }
  return 0;
}

/* Returns 1 if OP can be source of a simple move operation.
   Same as general_operand, but a LABEL_REF is valid, PRE_DEC is
   invalid as are subregs of system registers.  */

int
general_movsrc_operand (op, mode)
     rtx op;
     enum machine_mode mode;
{
  if (GET_CODE (op) == MEM)
    {
      rtx inside = XEXP (op, 0);
      if (GET_CODE (inside) == CONST)
	inside = XEXP (inside, 0);

      if (GET_CODE (inside) == LABEL_REF)
	return 1;

      if (GET_CODE (inside) == PLUS
	  && GET_CODE (XEXP (inside, 0)) == LABEL_REF
	  && GET_CODE (XEXP (inside, 1)) == CONST_INT)
	return 1;

      /* Only post inc allowed.  */
      if (GET_CODE (inside) == PRE_DEC)
	return 0;
    }

  if ((mode == QImode || mode == HImode)
      && (GET_CODE (op) == SUBREG
	  && GET_CODE (XEXP (op, 0)) == REG
	  && system_reg_operand (XEXP (op, 0), mode)))
    return 0;

  return general_operand (op, mode);
}

/* Returns 1 if OP can be a destination of a move.
   Same as general_operand, but no preinc allowed.  */

int
general_movdst_operand (op, mode)
     rtx op;
     enum machine_mode mode;
{
  /* Only pre dec allowed.  */
  if (GET_CODE (op) == MEM && GET_CODE (XEXP (op, 0)) == POST_INC)
    return 0;

  return general_operand (op, mode);
}

/* Returns 1 if OP is a normal arithmetic register.  */

int
arith_reg_operand (op, mode)
     rtx op;
     enum machine_mode mode;
{
  if (register_operand (op, mode))
    {
      if (GET_CODE (op) == REG)
	return (REGNO (op) != T_REG
		&& REGNO (op) != PR_REG
		&& REGNO (op) != FPUL_REG
		&& REGNO (op) != MACH_REG
		&& REGNO (op) != MACL_REG);
      return 1;
    }
  return 0;
}

/* Returns 1 if OP is a valid source operand for an arithmetic insn.  */

int
arith_operand (op, mode)
     rtx op;
     enum machine_mode mode;
{
  if (arith_reg_operand (op, mode))
    return 1;

  if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_I (INTVAL (op)))
    return 1;

  return 0;
}

/* Returns 1 if OP is a valid source operand for a compare insn.  */

int
arith_reg_or_0_operand (op, mode)
     rtx op;
     enum machine_mode mode;
{
  if (arith_reg_operand (op, mode))
    return 1;

  if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_N (INTVAL (op)))
    return 1;

  return 0;
}

/* Returns 1 if OP is a valid source operand for a logical operation.  */

int
logical_operand (op, mode)
     rtx op;
     enum machine_mode mode;
{
  if (arith_reg_operand (op, mode))
    return 1;

  if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_L (INTVAL (op)))
    return 1;

  return 0;
}

/* Nonzero if OP is a floating point value with value 0.0.  */

int
fp_zero_operand (op)
     rtx op;
{
  REAL_VALUE_TYPE r;

  if (GET_MODE (op) != SFmode)
    return 0;

  REAL_VALUE_FROM_CONST_DOUBLE (r, op);
  return REAL_VALUES_EQUAL (r, dconst0);
}

/* Nonzero if OP is a floating point value with value 1.0.  */

int
fp_one_operand (op)
     rtx op;
{
  REAL_VALUE_TYPE r;

  if (GET_MODE (op) != SFmode)
    return 0;

  REAL_VALUE_FROM_CONST_DOUBLE (r, op);
  return REAL_VALUES_EQUAL (r, dconst1);
}

/* Return non-zero if REG is not used after INSN.
   We assume REG is a reload reg, and therefore does
   not live past labels.  It may live past calls or jumps though.  */
int
reg_unused_after (reg, insn)
     rtx reg;
     rtx insn;
{
  enum rtx_code code;
  rtx set;

  /* If the reg is set by this instruction, then it is safe for our
     case.  Disregard the case where this is a store to memory, since
     we are checking a register used in the store address.  */
  set = single_set (insn);
  if (set && GET_CODE (SET_DEST (set)) != MEM
      && reg_overlap_mentioned_p (reg, SET_DEST (set)))
    return 1;

  while (insn = NEXT_INSN (insn))
    {
      code = GET_CODE (insn);

#if 0
      /* If this is a label that existed before reload, then the register
	 if dead here.  However, if this is a label added by reorg, then
	 the register may still be live here.  We can't tell the difference,
	 so we just ignore labels completely.  */
      if (code == CODE_LABEL)
	return 1;
      /* else */
#endif

      if (code == JUMP_INSN)
	return 0;

      /* If this is a sequence, we must handle them all at once.
	 We could have for instance a call that sets the target register,
	 and a insn in a delay slot that uses the register.  In this case,
	 we must return 0.  */
      else if (code == INSN && GET_CODE (PATTERN (insn)) == SEQUENCE)
	{
	  int i;
	  int retval = 0;

	  for (i = 0; i < XVECLEN (PATTERN (insn), 0); i++)
	    {
	      rtx this_insn = XVECEXP (PATTERN (insn), 0, i);
	      rtx set = single_set (this_insn);

	      if (GET_CODE (this_insn) == CALL_INSN)
		code = CALL_INSN;

	      if (set && reg_overlap_mentioned_p (reg, SET_SRC (set)))
		return 0;
	      if (set && reg_overlap_mentioned_p (reg, SET_DEST (set)))
		{
		  if (GET_CODE (SET_DEST (set)) != MEM)
		    retval = 1;
		  else
		    return 0;
		}
	      if (set == 0
		  && reg_overlap_mentioned_p (reg, PATTERN (this_insn)))
		return 0;
	    }
	  if (retval == 1)
	    return 1;
	}
      else if (GET_RTX_CLASS (code) == 'i')
	{
	  rtx set = single_set (insn);

	  if (set && reg_overlap_mentioned_p (reg, SET_SRC (set)))
	    return 0;
	  if (set && reg_overlap_mentioned_p (reg, SET_DEST (set)))
	    return GET_CODE (SET_DEST (set)) != MEM;
	  if (set == 0 && reg_overlap_mentioned_p (reg, PATTERN (insn)))
	    return 0;
	}

      if (code == CALL_INSN && call_used_regs[REGNO (reg)])
	return 1;
    }
  return 1;
}
