libgo: Add no-dist and -Wno-portability to AM_INIT_AUTOMAKE.

From-SVN: r191575

libgo/Makefile.in

@@ -46,12 +46,10 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/../config.guess \
-	$(srcdir)/../config.sub $(srcdir)/../depcomp \
-	$(srcdir)/../install-sh $(srcdir)/../ltmain.sh \
-	$(srcdir)/../missing $(srcdir)/../mkinstalldirs \
-	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(srcdir)/config.h.in $(top_srcdir)/configure
+DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/configure $(am__configure_deps) \
+	$(srcdir)/config.h.in $(srcdir)/../mkinstalldirs \
+	$(srcdir)/../depcomp
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/../config/depstand.m4 \
 	$(top_srcdir)/../config/lead-dot.m4 \
@@ -174,48 +172,6 @@ am__DEPENDENCIES_2 = bufio.lo bytes.lo bytes/index.lo crypto.lo \
 libgo_la_DEPENDENCIES = $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_1) \
 	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
 	$(am__DEPENDENCIES_1)
-am__libgo_la_SOURCES_DIST = runtime/go-append.c runtime/go-assert.c \
-	runtime/go-assert-interface.c \
-	runtime/go-byte-array-to-string.c runtime/go-breakpoint.c \
-	runtime/go-caller.c runtime/go-callers.c \
-	runtime/go-can-convert-interface.c runtime/go-cgo.c \
-	runtime/go-check-interface.c runtime/go-construct-map.c \
-	runtime/go-convert-interface.c runtime/go-copy.c \
-	runtime/go-defer.c runtime/go-deferred-recover.c \
-	runtime/go-eface-compare.c runtime/go-eface-val-compare.c \
-	runtime/go-getgoroot.c runtime/go-int-array-to-string.c \
-	runtime/go-int-to-string.c runtime/go-interface-compare.c \
-	runtime/go-interface-eface-compare.c \
-	runtime/go-interface-val-compare.c runtime/go-make-slice.c \
-	runtime/go-map-delete.c runtime/go-map-index.c \
-	runtime/go-map-len.c runtime/go-map-range.c \
-	runtime/go-matherr.c runtime/go-nanotime.c runtime/go-now.c \
-	runtime/go-new-map.c runtime/go-new.c runtime/go-nosys.c \
-	runtime/go-panic.c runtime/go-print.c runtime/go-recover.c \
-	runtime/go-reflect-call.c runtime/go-reflect-map.c \
-	runtime/go-rune.c runtime/go-runtime-error.c \
-	runtime/go-setenv.c runtime/go-signal.c runtime/go-strcmp.c \
-	runtime/go-string-to-byte-array.c \
-	runtime/go-string-to-int-array.c runtime/go-strplus.c \
-	runtime/go-strslice.c runtime/go-traceback.c \
-	runtime/go-trampoline.c runtime/go-type-complex.c \
-	runtime/go-type-eface.c runtime/go-type-error.c \
-	runtime/go-type-float.c runtime/go-type-identity.c \
-	runtime/go-type-interface.c runtime/go-type-string.c \
-	runtime/go-typedesc-equal.c runtime/go-typestring.c \
-	runtime/go-unsafe-new.c runtime/go-unsafe-newarray.c \
-	runtime/go-unsafe-pointer.c runtime/go-unwind.c runtime/chan.c \
-	runtime/cpuprof.c runtime/lock_sema.c runtime/thread-sema.c \
-	runtime/lock_futex.c runtime/thread-linux.c runtime/mcache.c \
-	runtime/mcentral.c runtime/mem_posix_memalign.c runtime/mem.c \
-	runtime/mfinal.c runtime/mfixalloc.c runtime/mgc0.c \
-	runtime/mheap.c runtime/msize.c runtime/print.c runtime/proc.c \
-	runtime/runtime.c runtime/signal_unix.c runtime/thread.c \
-	runtime/yield.c runtime/rtems-task-variable-add.c iface.c \
-	malloc.c map.c mprof.c reflect.c runtime1.c sema.c sigqueue.c \
-	string.c time.c runtime/getncpu-none.c runtime/getncpu-bsd.c \
-	runtime/getncpu-solaris.c runtime/getncpu-irix.c \
-	runtime/getncpu-linux.c
 @LIBGO_IS_LINUX_FALSE@am__objects_1 = lock_sema.lo thread-sema.lo
 @LIBGO_IS_LINUX_TRUE@am__objects_1 = lock_futex.lo thread-linux.lo
 @HAVE_SYS_MMAN_H_FALSE@am__objects_2 = mem_posix_memalign.lo
@@ -275,7 +231,6 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
 	$(LDFLAGS) -o $@
 SOURCES = $(libgobegin_a_SOURCES) $(libgo_la_SOURCES)
-DIST_SOURCES = $(libgobegin_a_SOURCES) $(am__libgo_la_SOURCES_DIST)
 MULTISRCTOP = 
 MULTIBUILDTOP = 
 MULTIDIRS = 
@@ -309,47 +264,10 @@ DATA = $(toolexeclibgo_DATA) $(toolexeclibgoarchive_DATA) \
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	distdir dist dist-all distcheck
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = testsuite
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d "$(distdir)" \
-    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr "$(distdir)"; }; }
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -3971,182 +3889,6 @@ GTAGS:
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(MKDIR_P) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -755 \
-		-exec chmod u+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
-
-dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
-	*.tar.xz*) \
-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	test -d $(distdir)/_build || exit 0; \
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-	  && cd "$$am__cwd" \
-	  || exit 1
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@$(am__cd) '$(distuninstallcheck_dir)' \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
 check-am: all-am
 check: check-recursive
 all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) all-multi $(DATA) \
@@ -4317,18 +4059,16 @@ uninstall-am: uninstall-toolexeclibLIBRARIES \
 	all all-am all-multi am--refresh check check-am clean \
 	clean-generic clean-libtool clean-local clean-multi \
 	clean-toolexeclibLIBRARIES clean-toolexeclibLTLIBRARIES ctags \
-	ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-lzma \
-	dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \
-	distclean-compile distclean-generic distclean-hdr \
-	distclean-libtool distclean-multi distclean-tags \
-	distcleancheck distdir distuninstallcheck dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-multi install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	install-toolexeclibLIBRARIES install-toolexeclibLTLIBRARIES \
-	install-toolexeclibgoDATA install-toolexeclibgoarchiveDATA \
+	ctags-recursive distclean distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-multi distclean-tags \
+	dvi dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-multi \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip install-toolexeclibLIBRARIES \
+	install-toolexeclibLTLIBRARIES install-toolexeclibgoDATA \
+	install-toolexeclibgoarchiveDATA \
 	install-toolexeclibgocompressDATA \
 	install-toolexeclibgocontainerDATA \
 	install-toolexeclibgocryptoDATA \

libgo/configure.ac

@@ -19,7 +19,7 @@ AM_ENABLE_MULTILIB(, ..)
 AC_CANONICAL_SYSTEM
 target_alias=${target_alias-$host_alias}
 
-AM_INIT_AUTOMAKE([1.9.3 no-define foreign -Wall])
+AM_INIT_AUTOMAKE([1.9.3 no-define foreign no-dist -Wall -Wno-portability])
 AH_TEMPLATE(PACKAGE, [Name of package])
 AH_TEMPLATE(VERSION, [Version number of package])
 

libgo/testsuite/Makefile.in

@@ -35,7 +35,7 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = testsuite
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/../config/depstand.m4 \
 	$(top_srcdir)/../config/lead-dot.m4 \
@@ -54,10 +54,8 @@ CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
-DIST_SOURCES =
 DEJATOOL = $(PACKAGE)
 RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AR = @AR@
@@ -306,37 +304,6 @@ distclean-DEJAGNU:
 	-l='$(DEJATOOL)'; for tool in $$l; do \
 	  rm -f $$tool.sum $$tool.log; \
 	done
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
 check-am: all-am
 	$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
 check: check-am
@@ -438,8 +405,8 @@ uninstall-am:
 
 .PHONY: all all-am check check-DEJAGNU check-am clean clean-generic \
 	clean-libtool distclean distclean-DEJAGNU distclean-generic \
-	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
+	distclean-libtool dvi dvi-am html html-am info info-am install \
+	install-am install-data install-data-am install-dvi \
 	install-dvi-am install-exec install-exec-am install-html \
 	install-html-am install-info install-info-am install-man \
 	install-pdf install-pdf-am install-ps install-ps-am \