Skip to content

R
riscv-gcc-1
Commit d0ce2326 by Oleg Endo
Options

sh.md (udivsi3, [...]): Simplify. 

gcc/
	* config/sh/sh.md (udivsi3, divsi3, mulsi3): Simplify.
	(mulhisi3, umulhisi3, (smulsi3_highpart, umulsi3_highpart): Convert to
	define_insn_and_split.
	(mulsi3_i): New define_insn_and_split.
	(mulsi3_call): Convert to define_insn.
	(mulsidi3, mulsidi3_compact, umulsidi3, umulsidi3_compact):
	Remove constraints.

From-SVN: r235803
parent 1d793c34
Showing with 109 additions and 183 deletions
gcc/ChangeLog
2016-05-03 Oleg Endo <olegendo@gcc.gnu.org>
* config/sh/sh.md (udivsi3, divsi3, mulsi3): Simplify.
(mulhisi3, umulhisi3, (smulsi3_highpart, umulsi3_highpart): Convert to
define_insn_and_split.
(mulsi3_i): New define_insn_and_split.
(mulsi3_call): Convert to define_insn.
(mulsidi3, mulsidi3_compact, umulsidi3, umulsidi3_compact):
Remove constraints.
2016-05-02 Michael Meissner <meissner@linux.vnet.ibm.com>
* machmode.h (mode_complex): Add support to give the complex mode
......
gcc/config/sh/sh.md
......@@ -2244,16 +2244,9 @@
(define_expand "udivsi3"
[(set (match_dup 3) (symbol_ref:SI "__udivsi3"))
(set (reg:SI R4_REG) (match_operand:SI 1 "general_operand" ""))
(set (reg:SI R5_REG) (match_operand:SI 2 "general_operand" ""))
(parallel [(set (match_operand:SI 0 "register_operand" "")
(udiv:SI (reg:SI R4_REG)
(reg:SI R5_REG)))
(clobber (reg:SI T_REG))
(clobber (reg:SI PR_REG))
(clobber (reg:SI R4_REG))
(use (match_dup 3))])]
[(set (match_operand:SI 0 "register_operand")
(udiv:SI (match_operand:SI 1 "general_operand")
(match_operand:SI 2 "general_operand")))]
""
{
rtx last;
......@@ -2379,18 +2372,9 @@
(set_attr "needs_delay_slot" "yes")])
(define_expand "divsi3"
[(set (match_dup 3) (symbol_ref:SI "__sdivsi3"))
(set (reg:SI R4_REG) (match_operand:SI 1 "general_operand" ""))
(set (reg:SI R5_REG) (match_operand:SI 2 "general_operand" ""))
(parallel [(set (match_operand:SI 0 "register_operand" "")
(div:SI (reg:SI R4_REG)
(reg:SI R5_REG)))
(clobber (reg:SI T_REG))
(clobber (reg:SI PR_REG))
(clobber (reg:SI R1_REG))
(clobber (reg:SI R2_REG))
(clobber (reg:SI R3_REG))
(use (match_dup 3))])]
[(set (match_operand:SI 0 "register_operand")
(div:SI (match_operand:SI 1 "general_operand")
(match_operand:SI 2 "general_operand")))]
""
{
rtx last;
......@@ -2434,6 +2418,30 @@
;; Multiplication instructions
;; -------------------------------------------------------------------------
(define_insn_and_split "mulhisi3"
[(set (match_operand:SI 0 "arith_reg_dest")
(mult:SI (sign_extend:SI (match_operand:HI 1 "arith_reg_operand"))
(sign_extend:SI (match_operand:HI 2 "arith_reg_operand"))))
(clobber (reg:SI MACL_REG))]
"TARGET_SH1 && can_create_pseudo_p ()"
"#"
"&& 1"
[(set (reg:SI MACL_REG) (mult:SI (sign_extend:SI (match_dup 1))
(sign_extend:SI (match_dup 2))))
(set (match_dup 0) (reg:SI MACL_REG))])
(define_insn_and_split "umulhisi3"
[(set (match_operand:SI 0 "arith_reg_dest")
(mult:SI (zero_extend:SI (match_operand:HI 1 "arith_reg_operand"))
(zero_extend:SI (match_operand:HI 2 "arith_reg_operand"))))
(clobber (reg:SI MACL_REG))]
"TARGET_SH1 && can_create_pseudo_p ()"
"#"
"&& 1"
[(set (reg:SI MACL_REG) (mult:SI (zero_extend:SI (match_dup 1))
(zero_extend:SI (match_dup 2))))
(set (match_dup 0) (reg:SI MACL_REG))])
(define_insn "umulhisi3_i"
[(set (reg:SI MACL_REG)
(mult:SI (zero_extend:SI
......@@ -2454,69 +2462,10 @@
"muls.w %1,%0"
[(set_attr "type" "smpy")])
(define_expand "mulhisi3"
[(set (reg:SI MACL_REG)
(mult:SI (sign_extend:SI
(match_operand:HI 1 "arith_reg_operand" ""))
(sign_extend:SI
(match_operand:HI 2 "arith_reg_operand" ""))))
(set (match_operand:SI 0 "arith_reg_operand" "")
(reg:SI MACL_REG))]
"TARGET_SH1"
{
rtx_insn *insn;
rtx macl;
macl = gen_rtx_REG (SImode, MACL_REG);
start_sequence ();
emit_insn (gen_mulhisi3_i (operands[1], operands[2]));
insn = get_insns ();
end_sequence ();
/* expand_binop can't find a suitable code in umul_widen_optab to
make a REG_EQUAL note from, so make one here.
See also smulsi3_highpart.
??? Alternatively, we could put this at the calling site of expand_binop,
i.e. expand_expr. */
/* Use emit_libcall_block for loop invariant code motion and to make
a REG_EQUAL note. */
emit_libcall_block (insn, operands[0], macl, SET_SRC (single_set (insn)));
DONE;
})
(define_expand "umulhisi3"
[(set (reg:SI MACL_REG)
(mult:SI (zero_extend:SI
(match_operand:HI 1 "arith_reg_operand" ""))
(zero_extend:SI
(match_operand:HI 2 "arith_reg_operand" ""))))
(set (match_operand:SI 0 "arith_reg_operand" "")
(reg:SI MACL_REG))]
"TARGET_SH1"
{
rtx_insn *insn;
rtx macl;
macl = gen_rtx_REG (SImode, MACL_REG);
start_sequence ();
emit_insn (gen_umulhisi3_i (operands[1], operands[2]));
insn = get_insns ();
end_sequence ();
/* expand_binop can't find a suitable code in umul_widen_optab to
make a REG_EQUAL note from, so make one here.
See also smulsi3_highpart.
??? Alternatively, we could put this at the calling site of expand_binop,
i.e. expand_expr. */
/* Use emit_libcall_block for loop invariant code motion and to make
a REG_EQUAL note. */
emit_libcall_block (insn, operands[0], macl, SET_SRC (single_set (insn)));
DONE;
})
;; mulsi3 on the SH2 can be done in one instruction, on the SH1 we generate
;; a call to a routine which clobbers known registers.
(define_insn ""
(define_insn "mulsi3_call"
[(set (match_operand:SI 1 "register_operand" "=z")
(mult:SI (reg:SI R4_REG) (reg:SI R5_REG)))
(clobber (reg:SI MACL_REG))
......@@ -2531,22 +2480,6 @@
[(set_attr "type" "sfunc")
(set_attr "needs_delay_slot" "yes")])
(define_expand "mulsi3_call"
[(set (reg:SI R4_REG) (match_operand:SI 1 "general_operand" ""))
(set (reg:SI R5_REG) (match_operand:SI 2 "general_operand" ""))
(parallel[(set (match_operand:SI 0 "register_operand" "")
(mult:SI (reg:SI R4_REG)
(reg:SI R5_REG)))
(clobber (reg:SI MACL_REG))
(clobber (reg:SI T_REG))
(clobber (reg:SI PR_REG))
(clobber (reg:SI R3_REG))
(clobber (reg:SI R2_REG))
(clobber (reg:SI R1_REG))
(use (match_operand:SI 3 "register_operand" ""))])]
"TARGET_SH1"
"")
(define_insn "mul_r"
[(set (match_operand:SI 0 "arith_reg_dest" "=r")
(mult:SI (match_operand:SI 1 "arith_reg_operand" "0")
......@@ -2563,33 +2496,44 @@
"mul.l %1,%0"
[(set_attr "type" "dmpy")])
(define_insn_and_split "mulsi3_i"
[(set (match_operand:SI 0 "arith_reg_dest")
(mult:SI (match_operand:SI 1 "arith_reg_operand")
(match_operand:SI 2 "arith_reg_operand")))
(clobber (reg:SI MACL_REG))]
"TARGET_SH2 && can_create_pseudo_p ()"
"#"
"&& 1"
[(set (reg:SI MACL_REG) (mult:SI (match_dup 1) (match_dup 2)))
(set (match_dup 0) (reg:SI MACL_REG))])
(define_expand "mulsi3"
[(set (reg:SI MACL_REG)
(mult:SI (match_operand:SI 1 "arith_reg_operand" "")
(match_operand:SI 2 "arith_reg_operand" "")))
(set (match_operand:SI 0 "arith_reg_operand" "")
(reg:SI MACL_REG))]
[(set (match_operand:SI 0 "arith_reg_dest")
(mult:SI (match_operand:SI 1 "arith_reg_operand")
(match_operand:SI 2 "arith_reg_operand")))]
"TARGET_SH1"
{
if (!TARGET_SH2)
{
/* The address must be set outside the libcall,
since it goes into a pseudo. */
emit_move_insn (gen_rtx_REG (SImode, R4_REG), operands[1]);
emit_move_insn (gen_rtx_REG (SImode, R5_REG), operands[2]);
rtx sym = function_symbol (NULL, "__mulsi3", SFUNC_STATIC).sym;
rtx addr = force_reg (SImode, sym);
rtx insns = gen_mulsi3_call (operands[0], operands[1],
operands[2], addr);
emit_insn (insns);
emit_insn (gen_mulsi3_call (force_reg (SImode, sym), operands[0]));
}
else
{
rtx macl = gen_rtx_REG (SImode, MACL_REG);
/* FIXME: For some reason, expanding the mul_l insn and the macl store
insn early gives slightly better code. In particular it prevents
the decrement-test loop type to be used in some cases which saves
one multiplication in the loop setup code.
emit_insn (gen_mulsi3_i (operands[0], operands[1], operands[2]));
*/
emit_insn (gen_mul_l (operands[1], operands[2]));
/* consec_sets_giv can only recognize the first insn that sets a
giv as the giv insn. So we must tag this also with a REG_EQUAL
note. */
emit_insn (gen_movsi_i ((operands[0]), macl));
emit_move_insn (operands[0], gen_rtx_REG (SImode, MACL_REG));
}
DONE;
})
......@@ -2610,9 +2554,9 @@
[(set_attr "type" "dmpy")])
(define_expand "mulsidi3"
[(set (match_operand:DI 0 "arith_reg_dest" "")
(mult:DI (sign_extend:DI (match_operand:SI 1 "arith_reg_operand" ""))
(sign_extend:DI (match_operand:SI 2 "arith_reg_operand" ""))))]
[(set (match_operand:DI 0 "arith_reg_dest")
(mult:DI (sign_extend:DI (match_operand:SI 1 "arith_reg_operand"))
(sign_extend:DI (match_operand:SI 2 "arith_reg_operand"))))]
"TARGET_SH2"
{
emit_insn (gen_mulsidi3_compact (operands[0], operands[1], operands[2]));
......@@ -2620,13 +2564,12 @@
})
(define_insn_and_split "mulsidi3_compact"
[(set (match_operand:DI 0 "arith_reg_dest" "=r")
(mult:DI
(sign_extend:DI (match_operand:SI 1 "arith_reg_operand" "r"))
(sign_extend:DI (match_operand:SI 2 "arith_reg_operand" "r"))))
[(set (match_operand:DI 0 "arith_reg_dest")
(mult:DI (sign_extend:DI (match_operand:SI 1 "arith_reg_operand"))
(sign_extend:DI (match_operand:SI 2 "arith_reg_operand"))))
(clobber (reg:SI MACH_REG))
(clobber (reg:SI MACL_REG))]
"TARGET_SH2"
"TARGET_SH2 && can_create_pseudo_p ()"
"#"
"&& 1"
[(const_int 0)]
......@@ -2659,9 +2602,9 @@
[(set_attr "type" "dmpy")])
(define_expand "umulsidi3"
[(set (match_operand:DI 0 "arith_reg_dest" "")
(mult:DI (zero_extend:DI (match_operand:SI 1 "arith_reg_operand" ""))
(zero_extend:DI (match_operand:SI 2 "arith_reg_operand" ""))))]
[(set (match_operand:DI 0 "arith_reg_dest")
(mult:DI (zero_extend:DI (match_operand:SI 1 "arith_reg_operand"))
(zero_extend:DI (match_operand:SI 2 "arith_reg_operand"))))]
"TARGET_SH2"
{
emit_insn (gen_umulsidi3_compact (operands[0], operands[1], operands[2]));
......@@ -2669,13 +2612,12 @@
})
(define_insn_and_split "umulsidi3_compact"
[(set (match_operand:DI 0 "arith_reg_dest" "=r")
(mult:DI
(zero_extend:DI (match_operand:SI 1 "arith_reg_operand" "r"))
(zero_extend:DI (match_operand:SI 2 "arith_reg_operand" "r"))))
[(set (match_operand:DI 0 "arith_reg_dest")
(mult:DI (zero_extend:DI (match_operand:SI 1 "arith_reg_operand"))
(zero_extend:DI (match_operand:SI 2 "arith_reg_operand"))))
(clobber (reg:SI MACH_REG))
(clobber (reg:SI MACL_REG))]
"TARGET_SH2"
"TARGET_SH2 && can_create_pseudo_p ()"
"#"
"&& 1"
[(const_int 0)]
......@@ -2705,38 +2647,23 @@
"dmuls.l %1,%0"
[(set_attr "type" "dmpy")])
(define_expand "smulsi3_highpart"
[(parallel
[(set (reg:SI MACH_REG)
(truncate:SI
(lshiftrt:DI
(define_insn_and_split "smulsi3_highpart"
[(set (match_operand:SI 0 "arith_reg_dest")
(truncate:SI
(lshiftrt:DI
(mult:DI
(sign_extend:DI (match_operand:SI 1 "arith_reg_operand" ""))
(sign_extend:DI (match_operand:SI 2 "arith_reg_operand" "")))
(const_int 32))))
(clobber (reg:SI MACL_REG))])
(set (match_operand:SI 0 "arith_reg_operand" "")
(reg:SI MACH_REG))]
"TARGET_SH2"
(sign_extend:DI (match_operand:SI 1 "arith_reg_operand"))
(sign_extend:DI (match_operand:SI 2 "arith_reg_operand")))
(const_int 32))))
(clobber (reg:SI MACL_REG))
(clobber (reg:SI MACH_REG))]
"TARGET_SH2 && can_create_pseudo_p ()"
"#"
"&& 1"
[(const_int 0)]
{
rtx_insn *insn;
rtx mach;
mach = gen_rtx_REG (SImode, MACH_REG);
start_sequence ();
emit_insn (gen_smulsi3_highpart_i (operands[1], operands[2]));
insn = get_insns ();
end_sequence ();
/* expand_binop can't find a suitable code in mul_highpart_optab to
make a REG_EQUAL note from, so make one here.
See also {,u}mulhisi.
??? Alternatively, we could put this at the calling site of expand_binop,
i.e. expand_mult_highpart. */
/* Use emit_libcall_block for loop invariant code motion and to make
a REG_EQUAL note. */
emit_libcall_block (insn, operands[0], mach, SET_SRC (single_set (insn)));
DONE;
emit_move_insn (operands[0], gen_rtx_REG (SImode, MACH_REG));
})
(define_insn "umulsi3_highpart_i"
......@@ -2752,33 +2679,22 @@
"dmulu.l %1,%0"
[(set_attr "type" "dmpy")])
(define_expand "umulsi3_highpart"
[(parallel
[(set (reg:SI MACH_REG)
(truncate:SI
(lshiftrt:DI
(define_insn_and_split "umulsi3_highpart"
[(set (match_operand:SI 0 "arith_reg_dest")
(truncate:SI
(lshiftrt:DI
(mult:DI
(zero_extend:DI (match_operand:SI 1 "arith_reg_operand" ""))
(zero_extend:DI (match_operand:SI 2 "arith_reg_operand" "")))
(const_int 32))))
(clobber (reg:SI MACL_REG))])
(set (match_operand:SI 0 "arith_reg_operand" "")
(reg:SI MACH_REG))]
"TARGET_SH2"
(zero_extend:DI (match_operand:SI 1 "arith_reg_operand"))
(zero_extend:DI (match_operand:SI 2 "arith_reg_operand")))
(const_int 32))))
(clobber (reg:SI MACL_REG))]
"TARGET_SH2 && can_create_pseudo_p ()"
"#"
"&& 1"
[(const_int 0)]
{
rtx_insn *insn;
rtx mach;
mach = gen_rtx_REG (SImode, MACH_REG);
start_sequence ();
emit_insn (gen_umulsi3_highpart_i (operands[1], operands[2]));
insn = get_insns ();
end_sequence ();
/* Use emit_libcall_block for loop invariant code motion and to make
a REG_EQUAL note. */
emit_libcall_block (insn, operands[0], mach, SET_SRC (single_set (insn)));
DONE;
emit_move_insn (operands[0], gen_rtx_REG (SImode, MACH_REG));
})
;; -------------------------------------------------------------------------
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment