Skip to content

R
riscv-gcc-1
Commit ceb5e20f by Geoffrey Keating Committed by Geoffrey Keating
Options

aclocal.m4: Replace with version copied from libstdc++-v3. 

	* aclocal.m4: Replace with version copied from libstdc++-v3.
	* configure.in: Update for changes to aclocal and Makefile.
	* configure: Regenerate.
	* Makefile.in: Correct install and uninstall for cross targets.
	* libU77/configure: Regenerate.

From-SVN: r49316
parent ffdeea47
Showing with 1062 additions and 447 deletions
libf2c/ChangeLog
2002-01-28 Geoffrey Keating <geoffk@redhat.com>
* aclocal.m4: Replace with version copied from libstdc++-v3.
* configure.in: Update for changes to aclocal and Makefile.
* configure: Regenerate.
* Makefile.in: Correct install and uninstall for cross targets.
* libU77/configure: Regenerate.
2002-01-20 Toon Moene <toon@moene.indiv.nluug.nl>
* Makefile.in: $(MULTISUBDIR) has an implied leading `/';
......
libf2c/Makefile.in
......@@ -24,13 +24,18 @@ MAKEOVERRIDES=
#### Start of system configuration section. ####
srcdir = @srcdir@
VPATH = @srcdir@
srcdir = @glibcpp_srcdir@
VPATH = @glibcpp_srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
target_alias = @target_alias@
gcc_version = @gcc_version@
gcc_version_trigger = @gcc_version_trigger@
top_srcdir = @top_srcdir@
toplevel_srcdir = @toplevel_srcdir@
toolexecdir = @glibcpp_toolexecdir@
glibcpp_toolexecdir = @glibcpp_toolexecdir@
glibcpp_toolexeclibdir = @glibcpp_toolexeclibdir@
top_builddir = .
......@@ -204,28 +209,21 @@ check:
cd libU77; $(MAKE) G77DIR=../../../gcc/ check
install: all
$(LIBTOOL) --mode=install $(INSTALL) $(LIBG2C) $(libdir)$(MULTISUBDIR)
$(INSTALL_DATA) libfrtbegin.a $(libsubdir)$(MULTISUBDIR)
$(RANLIB) $(libsubdir)$(MULTISUBDIR)/libfrtbegin.a
$(SHELL) $(toplevel_srcdir)/mkinstalldirs $(glibcpp_toolexeclibdir)
$(LIBTOOL) --mode=install $(INSTALL) $(LIBG2C) $(glibcpp_toolexeclibdir)
$(INSTALL_DATA) libfrtbegin.a $(glibcpp_toolexeclibdir)
$(RANLIB) $(glibcpp_toolexeclibdir)/libfrtbegin.a
$(INSTALL_DATA) g2c.h $(libsubdir)/include/g2c.h
@if [ -f f2c-install-ok -o -f $(srcdir)/f2c-install-ok ]; then \
echo ''; \
echo 'Warning: g77 no longer installs libf2c.a or f2c.h.'; \
echo ' You must do so yourself. For more information,'; \
echo ' read "Distributing Binaries" in the g77 docs.'; \
echo ' (To turn off this warning, delete the file'; \
echo ' f2c-install-ok in the source or build directory.)'; \
echo ''; \
else true; fi
$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO="$@"
@-$(LIBTOOL) --mode=finish $(prefix)/lib
@-$(LIBTOOL) --mode=finish $(glibcpp_toolexeclibdir)
install-strip:
$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
uninstall:
rm -f $(libsubdir)$(MULTISUBDIR)/include/g2c.h
$(LIBTOOL) --mode=uninstall rm -f $(libdir)$(MULTISUBDIR)/$(LIBG2C_BASE).la
rm -f $(libsubdir)/include/g2c.h
rm -f $(glibcpp_toolexeclibdir)/libfrtbegin.a
$(LIBTOOL) --mode=uninstall rm -f $(glibcpp_toolexeclibdir)$(LIBG2C_BASE).la
$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO="$@"
mostlyclean:
......
libf2c/aclocal.m4
dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
dnl PARTICULAR PURPOSE.
dnl
dnl Initialize configure bits.
dnl
dnl GLIBCPP_CONFIGURE
AC_DEFUN(GLIBCPP_CONFIGURE, [
dnl Default to --enable-multilib
AC_ARG_ENABLE(multilib,
[ --enable-multilib build hella library versions (default)],
[case "${enableval}" in
yes) multilib=yes ;;
no) multilib=no ;;
*) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
esac], [multilib=yes])dnl
# When building with srcdir == objdir, links to the source files will
# be created in directories within the target_subdir. We have to
# adjust toplevel_srcdir accordingly, so that configure finds
# install-sh and other auxiliary files that live in the top-level
# source directory.
if test "${srcdir}" = "."; then
if test -z "${with_target_subdir}"; then
toprel=".."
else
if test "${with_target_subdir}" != "."; then
toprel="${with_multisrctop}../.."
else
toprel="${with_multisrctop}.."
fi
fi
else
toprel=".."
fi
AC_CONFIG_AUX_DIR(${srcdir}/$toprel)
toplevel_srcdir=\${top_srcdir}/$toprel
AC_SUBST(toplevel_srcdir)
# Export build and source directories.
# These need to be absolute paths, yet at the same time need to
# canonicalize only relative paths, because then amd will not unmount
# drives. Thus the use of PWDCMD: set it to 'pawd' or 'amq -w' if using amd.
glibcpp_builddir=`pwd`
case $srcdir in
[\\/$]* | ?:[\\/]*) glibcpp_srcdir=${srcdir} ;;
*) glibcpp_srcdir=`cd "$srcdir" && ${PWDCMD-pwd} || echo "$srcdir"` ;;
esac
AC_SUBST(glibcpp_builddir)
AC_SUBST(glibcpp_srcdir)
dnl This is here just to satisfy automake.
ifelse(not,equal,[AC_CONFIG_AUX_DIR(..)])
# Will set LN_S to either 'ln -s' or 'ln'. With autoconf 2.50+, can also
# be 'cp -p' if linking isn't available.
#ac_cv_prog_LN_S='cp -p'
AC_PROG_LN_S
# We use these options to decide which functions to include.
AC_ARG_WITH(target-subdir,
[ --with-target-subdir=SUBDIR
configuring in a subdirectory])
AC_ARG_WITH(cross-host,
[ --with-cross-host=HOST configuring with a cross compiler])
# Never versions of autoconf add an underscore to these functions.
# Prevent future problems ...
ifdef([AC_PROG_CC_G],[],[define([AC_PROG_CC_G],defn([_AC_PROG_CC_G]))])
ifdef([AC_PROG_CC_GNU],[],[define([AC_PROG_CC_GNU],defn([_AC_PROG_CC_GNU]))])
ifdef([AC_PROG_CXX_G],[],[define([AC_PROG_CXX_G],defn([_AC_PROG_CXX_G]))])
ifdef([AC_PROG_CXX_GNU],[],[define([AC_PROG_CXX_GNU],defn([_AC_PROG_CXX_GNU]))])
# AC_PROG_CC
# FIXME: We temporarily define our own version of AC_PROG_CC. This is
# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
# are probably using a cross compiler, which will not be able to fully
# link an executable. This should really be fixed in autoconf
# itself.
AC_DEFUN(LIB_AC_PROG_CC,
[AC_BEFORE([$0], [AC_PROG_CPP])dnl
dnl Fool anybody using AC_PROG_CC.
AC_PROVIDE([AC_PROG_CC])
AC_CHECK_PROG(CC, gcc, gcc)
if test -z "$CC"; then
AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
fi
AC_PROG_CC_GNU
if test $ac_cv_prog_gcc = yes; then
GCC=yes
dnl Check whether -g works, even if CFLAGS is set, in case the package
dnl plays around with CFLAGS (such as to build both debugging and
dnl normal versions of a library), tasteless as that idea is.
ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
AC_PROG_CC_G
if test "$ac_test_CFLAGS" = set; then
CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
CFLAGS="-g -O2"
else
CFLAGS="-O2"
fi
else
GCC=
test "${CFLAGS+set}" = set || CFLAGS="-g"
fi
])
LIB_AC_PROG_CC
AC_CHECK_TOOL(AS, as)
AC_CHECK_TOOL(AR, ar)
AC_CHECK_TOOL(RANLIB, ranlib, ranlib-not-found-in-path-error)
AC_PROG_INSTALL
# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
# at least currently, we never actually build a program, so we never
# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
# fails, because we are probably configuring with a cross compiler
# which can't create executables. So we include AC_EXEEXT to keep
# automake happy, but we don't execute it, since we don't care about
# the result.
if false; then
# autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
# to nothing, so nothing would remain between `then' and `fi' if it
# were not for the `:' below.
:
AC_EXEEXT
fi
])
dnl
dnl GLIBCPP_EXPORT_INSTALL_INFO
dnl calculates gxx_install_dir
dnl exports glibcpp_toolexecdir
dnl exports glibcpp_toolexeclibdir
dnl exports glibcpp_prefixdir
dnl
dnl Assumes cross_compiling bits already done, and with_cross_host in
dnl particular
dnl
dnl GLIBCPP_EXPORT_INSTALL_INFO
AC_DEFUN(GLIBCPP_EXPORT_INSTALL_INFO, [
# Assumes glibcpp_builddir, glibcpp_srcdir are alreay set up and
# exported correctly in GLIBCPP_CONFIGURE.
glibcpp_toolexecdir=no
glibcpp_toolexeclibdir=no
glibcpp_prefixdir=${prefix}
AC_MSG_CHECKING([for interface version number])
libstdcxx_interface=$INTERFACE
AC_MSG_RESULT($libstdcxx_interface)
# Process the option "--enable-version-specific-runtime-libs"
AC_MSG_CHECKING([for --enable-version-specific-runtime-libs])
AC_ARG_ENABLE(version-specific-runtime-libs,
[ --enable-version-specific-runtime-libs Specify that runtime libraries should be installed in a compiler-specific directory ],
[case "$enableval" in
yes) version_specific_libs=yes ;;
no) version_specific_libs=no ;;
*) AC_MSG_ERROR([Unknown argument to enable/disable version-specific libs]);;
esac],
version_specific_libs=no)dnl
# Option set, now we can test it.
AC_MSG_RESULT($version_specific_libs)
gcc_version_trigger=${srcdir}/../gcc/version.c
gcc_version_full=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
gcc_version=`echo ${gcc_version_full} | sed -e 's/\([^ ]*\) .*/\1/'`
AC_SUBST(gcc_version)
AC_SUBST(gcc_version_trigger)
if test $version_specific_libs = yes; then
# Need the gcc compiler version to know where to install libraries
# and header files if --enable-version-specific-runtime-libs option
# is selected.
changequote(,)dnl
glibcpp_toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
glibcpp_toolexeclibdir='$(toolexecdir)/'${gcc_version}'$(MULTISUBDIR)'
changequote([,])dnl
fi
# Calculate glibcpp_toolexecdir, glibcpp_toolexeclibdir
# Install a library built with a cross compiler in tooldir, not libdir.
if test x"$glibcpp_toolexecdir" = x"no"; then
if test -n "$with_cross_host" &&
test x"$with_cross_host" != x"no"; then
glibcpp_toolexecdir='$(exec_prefix)/$(target_alias)'
glibcpp_toolexeclibdir='$(toolexecdir)/lib$(MULTISUBDIR)'
else
glibcpp_toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
glibcpp_toolexeclibdir='$(libdir)$(MULTISUBDIR)'
fi
fi
AC_SUBST(glibcpp_prefixdir)
AC_SUBST(glibcpp_toolexecdir)
AC_SUBST(glibcpp_toolexeclibdir)
])
sinclude(../libtool.m4)
dnl The lines below arrange for aclocal not to bring an installed
dnl libtool.m4 into aclocal.m4, while still arranging for automake to
dnl add a definition of LIBTOOL to Makefile.in.
ifelse(,,,[AC_SUBST(LIBTOOL)
AC_DEFUN([AM_PROG_LIBTOOL])
AC_DEFUN([AC_LIBTOOL_DLOPEN])
AC_DEFUN([AC_PROG_LD])
])
libf2c/configure
......@@ -12,6 +12,15 @@ ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
--enable-multilib build hella library versions (default)"
ac_help="$ac_help
--with-target-subdir=SUBDIR
configuring in a subdirectory"
ac_help="$ac_help
--with-cross-host=HOST configuring with a cross compiler"
ac_help="$ac_help
--enable-version-specific-runtime-libs Specify that runtime libraries should be installed in a compiler-specific directory "
ac_help="$ac_help
--enable-shared[=PKGS] build shared libraries [default=yes]"
ac_help="$ac_help
--enable-static[=PKGS] build static libraries [default=yes]"
......@@ -40,7 +49,6 @@ program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
sitefile=
srcdir=
target=NONE
verbose=
......@@ -155,7 +163,6 @@ Configuration:
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
--site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
......@@ -326,11 +333,6 @@ EOF
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
-site-file | --site-file | --site-fil | --site-fi | --site-f)
ac_prev=sitefile ;;
-site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
sitefile="$ac_optarg" ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
......@@ -496,16 +498,12 @@ fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
if test -z "$sitefile"; then
if test -z "$CONFIG_SITE"; then
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi
else
CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
......@@ -545,17 +543,8 @@ fi
if test "${srcdir}" = "." ; then
if test "${with_target_subdir}" != "." ; then
topsrcdir=${with_multisrctop}../..
else
topsrcdir=${with_multisrctop}..
fi
else
topsrcdir=${srcdir}/..
fi
ac_aux_dir=
for ac_dir in $topsrcdir $srcdir/$topsrcdir; do
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
......@@ -567,68 +556,117 @@ for ac_dir in $topsrcdir $srcdir/$topsrcdir; do
fi
done
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in $topsrcdir $srcdir/$topsrcdir" 1>&2; exit 1; }
{ echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
# If the language specific compiler does not exist, but the "gcc" directory
# does, we do not build anything. Note, $r is set by the top-level Makefile.
# Note that when we look for the compiler, we search both with and without
# extension to handle cross and canadian cross builds.
compiler_name=f771
rm -f skip-this-dir
echo $ac_n "checking if compiler $compiler_name has been built""... $ac_c" 1>&6
echo "configure:585: checking if compiler $compiler_name has been built" >&5
if eval "test \"`echo '$''{'g77_cv_compiler_exists'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
g77_cv_compiler_exists=yes
if test -n "$r"; then
if test -d "$r"/gcc; then
if test -f "$r"/gcc/$compiler_name \
|| test -f "$r"/gcc/$compiler_name.exe; then
true
else
g77_cv_compiler_exists=no
echo "rm -f config.cache config.log multilib.out" > skip-this-dir
fi
fi
fi
# Do some error checking and defaulting for the host and target type.
# The inputs are:
# configure --host=HOST --target=TARGET --build=BUILD NONOPT
#
# The rules are:
# 1. You are not allowed to specify --host, --target, and nonopt at the
# same time.
# 2. Host defaults to nonopt.
# 3. If nonopt is not specified, then host defaults to the current host,
# as determined by config.guess.
# 4. Target and build default to nonopt.
# 5. If nonopt is not specified, then target and build default to host.
fi
# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
case $host---$target---$nonopt in
NONE---*---* | *---NONE---* | *---*---NONE) ;;
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac
echo "$ac_t""$g77_cv_compiler_exists" 1>&6
if test x$g77_cv_compiler_exists = xno
then
rm -f Makefile conftest* confdefs* core
exit 0
# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:594: checking host system type" >&5
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
# at least currently, we never actually build a program, so we never
# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
# fails, because we are probably configuring with a cross compiler
# which cant create executables. So we include AC_EXEEXT to keep
# automake happy, but we dont execute it, since we dont care about
# the result.
if false; then
# autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
# to nothing, so nothing would remain between `then' and `fi' if it
# were not for the `:' below.
:
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
echo "configure:627: checking for Cygwin environment" >&5
echo $ac_n "checking target system type""... $ac_c" 1>&6
echo "configure:615: checking target system type" >&5
target_alias=$target
case "$target_alias" in
NONE)
case $nonopt in
NONE) target_alias=$host_alias ;;
*) target_alias=$nonopt ;;
esac ;;
esac
target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:633: checking build system type" >&5
build_alias=$build
case "$build_alias" in
NONE)
case $nonopt in
NONE) build_alias=$host_alias ;;
*) build_alias=$nonopt ;;
esac ;;
esac
build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
program_prefix=${target_alias}-
target_alias=${target_alias-$target}
if test $host != $build; then
ac_tool_prefix=${host_alias}-
else
ac_tool_prefix=
fi
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
echo "configure:665: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 632 "configure"
#line 670 "configure"
#include "confdefs.h"
int main() {
......@@ -639,7 +677,7 @@ int main() {
return __CYGWIN__;
; return 0; }
EOF
if { (eval echo configure:643: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:681: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
......@@ -656,19 +694,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
echo "configure:660: checking for mingw32 environment" >&5
echo "configure:698: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 665 "configure"
#line 703 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
if { (eval echo configure:672: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:710: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
......@@ -685,47 +723,133 @@ echo "$ac_t""$ac_cv_mingw32" 1>&6
MINGW32=
test "$ac_cv_mingw32" = yes && MINGW32=yes
# Check whether --enable-multilib or --disable-multilib was given.
if test "${enable_multilib+set}" = set; then
enableval="$enable_multilib"
case "${enableval}" in
yes) multilib=yes ;;
no) multilib=no ;;
*) { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
esac
else
multilib=yes
fi
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
echo "configure:691: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
# When building with srcdir == objdir, links to the source files will
# be created in directories within the target_subdir. We have to
# adjust toplevel_srcdir accordingly, so that configure finds
# install-sh and other auxiliary files that live in the top-level
# source directory.
if test "${srcdir}" = "."; then
if test -z "${with_target_subdir}"; then
toprel=".."
else
if test "${with_target_subdir}" != "."; then
toprel="${with_multisrctop}../.."
else
toprel="${with_multisrctop}.."
fi
fi
else
toprel=".."
fi
ac_aux_dir=
for ac_dir in ${srcdir}/$toprel $srcdir/${srcdir}/$toprel; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
fi
done
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in ${srcdir}/$toprel $srcdir/${srcdir}/$toprel" 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
toplevel_srcdir=\${top_srcdir}/$toprel
# Export build and source directories.
# These need to be absolute paths, yet at the same time need to
# canonicalize only relative paths, because then amd will not unmount
# drives. Thus the use of PWDCMD: set it to 'pawd' or 'amq -w' if using amd.
glibcpp_builddir=`pwd`
case $srcdir in
\\/$* | ?:\\/*) glibcpp_srcdir=${srcdir} ;;
*) glibcpp_srcdir=`cd "$srcdir" && ${PWDCMD-pwd} || echo "$srcdir"` ;;
esac
# Will set LN_S to either 'ln -s' or 'ln'. With autoconf 2.50+, can also
# be 'cp -p' if linking isn't available.
#ac_cv_prog_LN_S='cp -p'
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:797: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
ac_cv_exeext=.exe
rm -f conftestdata
if ln -s X conftestdata 2>/dev/null
then
rm -f conftestdata
ac_cv_prog_LN_S="ln -s"
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
if { (eval echo configure:701: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj | *.ilk | *.pdb) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
else
{ echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
fi
rm -f conftest*
test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
ac_cv_prog_LN_S=ln
fi
fi
LN_S="$ac_cv_prog_LN_S"
if test "$ac_cv_prog_LN_S" = "ln -s"; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
EXEEXT=""
test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
echo "$ac_t""${ac_cv_exeext}" 1>&6
ac_exeext=$EXEEXT
# We use these options to decide which functions to include.
# Check whether --with-target-subdir or --without-target-subdir was given.
if test "${with_target_subdir+set}" = set; then
withval="$with_target_subdir"
:
fi
# Check whether --with-cross-host or --without-cross-host was given.
if test "${with_cross_host+set}" = set; then
withval="$with_cross_host"
:
fi
# For g77 we'll set CC to point at the built gcc, but this will get it into
# the makefiles
# Never versions of autoconf add an underscore to these functions.
# Prevent future problems ...
# AC_PROG_CC
# FIXME: We temporarily define our own version of AC_PROG_CC. This is
# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
# are probably using a cross compiler, which will not be able to fully
# link an executable. This should really be fixed in autoconf
# itself.
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:729: checking for $ac_word" >&5
echo "configure:853: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -755,7 +879,7 @@ if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:759: checking for $ac_word" >&5
echo "configure:883: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -800,104 +924,400 @@ else
echo "$ac_t""no" 1>&6
fi
if test -z "$CC"; then
case "`uname -s`" in
*win32* | *WIN32*)
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:932: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
#ifdef __GNUC__
yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:941: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
if test $ac_cv_prog_gcc = yes; then
GCC=yes
ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:956: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
ac_cv_prog_cc_g=yes
else
ac_cv_prog_cc_g=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
CFLAGS="-g -O2"
else
CFLAGS="-O2"
fi
else
GCC=
test "${CFLAGS+set}" = set || CFLAGS="-g"
fi
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:987: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$AS"; then
ac_cv_prog_AS="$AS" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_AS="${ac_tool_prefix}as"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
fi
fi
AS="$ac_cv_prog_AS"
if test -n "$AS"; then
echo "$ac_t""$AS" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:810: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo "configure:1019: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
if test -n "$AR"; then
ac_cv_prog_AR="$AR" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="cl"
ac_cv_prog_AR="${ac_tool_prefix}ar"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
AR="$ac_cv_prog_AR"
if test -n "$AR"; then
echo "$ac_t""$AR" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1051: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$ac_cv_prog_RANLIB"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1083: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB="ranlib-not-found-in-path-error"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
else
RANLIB="ranlib-not-found-in-path-error"
fi
fi
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:1127: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
/|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
# Don't use installbsd from OSF since it installs stuff as root
# by default.
for ac_prog in ginstall scoinst install; do
if test -f $ac_dir/$ac_prog; then
if test $ac_prog = install &&
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
fi
fi
done
;;
esac
done
IFS="$ac_save_IFS"
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL="$ac_cv_path_install"
else
# As a last resort, use the slow shell script. We don't cache a
# path for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the path is relative.
INSTALL="$ac_install_sh"
fi
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
echo "$ac_t""$INSTALL" 1>&6
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:843: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
# at least currently, we never actually build a program, so we never
# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
# fails, because we are probably configuring with a cross compiler
# which can't create executables. So we include AC_EXEEXT to keep
# automake happy, but we don't execute it, since we don't care about
# the result.
if false; then
# autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
# to nothing, so nothing would remain between `then' and `fi' if it
# were not for the `:' below.
:
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
echo "configure:1195: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
#ifdef __GNUC__
yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:852: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
ac_cv_exeext=.exe
else
ac_cv_prog_gcc=no
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
if { (eval echo configure:1205: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
else
{ echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
fi
rm -f conftest*
test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
fi
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
EXEEXT=""
test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
echo "$ac_t""${ac_cv_exeext}" 1>&6
ac_exeext=$EXEEXT
if test $ac_cv_prog_gcc = yes; then
GCC=yes
else
GCC=
fi
fi
ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:871: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
ac_cv_prog_cc_g=yes
# Assumes glibcpp_builddir, glibcpp_srcdir are alreay set up and
# exported correctly in GLIBCPP_CONFIGURE.
glibcpp_toolexecdir=no
glibcpp_toolexeclibdir=no
glibcpp_prefixdir=${prefix}
echo $ac_n "checking for interface version number""... $ac_c" 1>&6
echo "configure:1235: checking for interface version number" >&5
libstdcxx_interface=$INTERFACE
echo "$ac_t""$libstdcxx_interface" 1>&6
# Process the option "--enable-version-specific-runtime-libs"
echo $ac_n "checking for --enable-version-specific-runtime-libs""... $ac_c" 1>&6
echo "configure:1241: checking for --enable-version-specific-runtime-libs" >&5
# Check whether --enable-version-specific-runtime-libs or --disable-version-specific-runtime-libs was given.
if test "${enable_version_specific_runtime_libs+set}" = set; then
enableval="$enable_version_specific_runtime_libs"
case "$enableval" in
yes) version_specific_libs=yes ;;
no) version_specific_libs=no ;;
*) { echo "configure: error: Unknown argument to enable/disable version-specific libs" 1>&2; exit 1; };;
esac
else
ac_cv_prog_cc_g=no
version_specific_libs=no
fi
rm -f conftest*
# Option set, now we can test it.
echo "$ac_t""$version_specific_libs" 1>&6
fi
gcc_version_trigger=${srcdir}/../gcc/version.c
gcc_version_full=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
gcc_version=`echo ${gcc_version_full} | sed -e 's/\(^ *\) .*/\1/'`
echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
if test "$GCC" = yes; then
CFLAGS="-g -O2"
if test $version_specific_libs = yes; then
# Need the gcc compiler version to know where to install libraries
# and header files if --enable-version-specific-runtime-libs option
# is selected.
glibcpp_toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
glibcpp_toolexeclibdir='$(toolexecdir)/'${gcc_version}'$(MULTISUBDIR)'
fi
# Calculate glibcpp_toolexecdir, glibcpp_toolexeclibdir
# Install a library built with a cross compiler in tooldir, not libdir.
if test x"$glibcpp_toolexecdir" = x"no"; then
if test -n "$with_cross_host" &&
test x"$with_cross_host" != x"no"; then
glibcpp_toolexecdir='$(exec_prefix)/$(target_alias)'
glibcpp_toolexeclibdir='$(toolexecdir)/lib$(MULTISUBDIR)'
else
CFLAGS="-g"
glibcpp_toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
glibcpp_toolexeclibdir='$(libdir)$(MULTISUBDIR)'
fi
fi
# If the language specific compiler does not exist, but the "gcc" directory
# does, we do not build anything. Note, $r is set by the top-level Makefile.
# Note that when we look for the compiler, we search both with and without
# extension to handle cross and canadian cross builds.
compiler_name=f771
rm -f skip-this-dir
echo $ac_n "checking if compiler $compiler_name has been built""... $ac_c" 1>&6
echo "configure:1295: checking if compiler $compiler_name has been built" >&5
if eval "test \"`echo '$''{'g77_cv_compiler_exists'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$GCC" = yes; then
CFLAGS="-O2"
g77_cv_compiler_exists=yes
if test -n "$r"; then
if test -d "$r"/gcc; then
if test -f "$r"/gcc/$compiler_name \
|| test -f "$r"/gcc/$compiler_name.exe; then
true
else
CFLAGS=
g77_cv_compiler_exists=no
echo "rm -f config.cache config.log multilib.out" > skip-this-dir
fi
fi
fi
fi
echo "$ac_t""$g77_cv_compiler_exists" 1>&6
if test x$g77_cv_compiler_exists = xno
then
rm -f Makefile conftest* confdefs* core
exit 0
fi
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
......@@ -967,51 +1387,6 @@ else
enable_fast_install=yes
fi
# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:978: checking host system type" >&5
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:999: checking build system type" >&5
build_alias=$build
case "$build_alias" in
NONE)
case $nonopt in
NONE) build_alias=$host_alias ;;
*) build_alias=$nonopt ;;
esac ;;
esac
build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
withval="$with_gnu_ld"
......@@ -1024,7 +1399,7 @@ ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
echo "configure:1028: checking for ld used by GCC" >&5
echo "configure:1403: checking for ld used by GCC" >&5
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
......@@ -1054,10 +1429,10 @@ echo "configure:1028: checking for ld used by GCC" >&5
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
echo "configure:1058: checking for GNU ld" >&5
echo "configure:1433: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
echo "configure:1061: checking for non-GNU ld" >&5
echo "configure:1436: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -1092,7 +1467,7 @@ else
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
echo "configure:1096: checking if the linker ($LD) is GNU ld" >&5
echo "configure:1471: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1109,7 +1484,7 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
echo "configure:1113: checking for $LD option to reload object files" >&5
echo "configure:1488: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1121,7 +1496,7 @@ reload_flag=$lt_cv_ld_reload_flag
test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
echo "configure:1125: checking for BSD-compatible nm" >&5
echo "configure:1500: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1158,29 +1533,8 @@ fi
NM="$lt_cv_path_NM"
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:1163: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftestdata
if ln -s X conftestdata 2>/dev/null
then
rm -f conftestdata
ac_cv_prog_LN_S="ln -s"
else
ac_cv_prog_LN_S=ln
fi
fi
LN_S="$ac_cv_prog_LN_S"
if test "$ac_cv_prog_LN_S" = "ln -s"; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
echo "configure:1184: checking how to recognise dependant libraries" >&5
echo "configure:1538: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1344,13 +1698,13 @@ file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
echo $ac_n "checking for object suffix""... $ac_c" 1>&6
echo "configure:1348: checking for object suffix" >&5
echo "configure:1702: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
if { (eval echo configure:1354: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:1708: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
for ac_file in conftest.*; do
case $ac_file in
*.c) ;;
......@@ -1367,12 +1721,6 @@ echo "$ac_t""$ac_cv_objext" 1>&6
OBJEXT=$ac_cv_objext
ac_objext=$ac_cv_objext
if test $host != $build; then
ac_tool_prefix=${host_alias}-
else
ac_tool_prefix=
fi
# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
# Only perform the check for file, if the check method requires it
......@@ -1380,7 +1728,7 @@ case $deplibs_check_method in
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
echo "configure:1384: checking for ${ac_tool_prefix}file" >&5
echo "configure:1732: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1442,7 +1790,7 @@ fi
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
echo $ac_n "checking for file""... $ac_c" 1>&6
echo "configure:1446: checking for file" >&5
echo "configure:1794: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1513,7 +1861,7 @@ esac
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1517: checking for $ac_word" >&5
echo "configure:1865: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1545,7 +1893,7 @@ if test -n "$ac_tool_prefix"; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1549: checking for $ac_word" >&5
echo "configure:1897: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1580,7 +1928,7 @@ fi
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1584: checking for $ac_word" >&5
echo "configure:1932: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1612,7 +1960,7 @@ if test -n "$ac_tool_prefix"; then
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1616: checking for $ac_word" >&5
echo "configure:1964: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1679,8 +2027,8 @@ test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
case $host in
*-*-irix6*)
# Find out which ABI we are using.
echo '#line 1683 "configure"' > conftest.$ac_ext
if { (eval echo configure:1684: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
echo '#line 2031 "configure"' > conftest.$ac_ext
if { (eval echo configure:2032: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
......@@ -1701,7 +2049,7 @@ case $host in
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
echo "configure:1705: checking whether the C compiler needs -belf" >&5
echo "configure:2053: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1714,14 +2062,14 @@ ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$a
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
#line 1718 "configure"
#line 2066 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
if { (eval echo configure:1725: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:2073: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
......@@ -1845,7 +2193,7 @@ else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1849: checking for $ac_word" >&5
echo "configure:2197: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1885,7 +2233,7 @@ fi
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:1889: checking for a BSD compatible install" >&5
echo "configure:2237: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -1938,7 +2286,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:1942: checking whether ${MAKE-make} sets \${MAKE}" >&5
echo "configure:2290: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -1967,7 +2315,7 @@ fi
# Sanity check for the cross-compilation case:
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:1971: checking how to run the C preprocessor" >&5
echo "configure:2319: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
......@@ -1982,13 +2330,13 @@ else
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
#line 1986 "configure"
#line 2334 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1992: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:2340: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
......@@ -1999,13 +2347,13 @@ else
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
#line 2003 "configure"
#line 2351 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2009: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:2357: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
......@@ -2016,13 +2364,13 @@ else
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
#line 2020 "configure"
#line 2368 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2026: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:2374: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
......@@ -2048,17 +2396,17 @@ echo "$ac_t""$CPP" 1>&6
ac_safe=`echo "stdio.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for stdio.h""... $ac_c" 1>&6
echo "configure:2052: checking for stdio.h" >&5
echo "configure:2400: checking for stdio.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2057 "configure"
#line 2405 "configure"
#include "confdefs.h"
#include <stdio.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2062: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:2410: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
......@@ -2086,12 +2434,12 @@ fi
echo $ac_n "checking for built-in g77 integer types""... $ac_c" 1>&6
echo "configure:2090: checking for built-in g77 integer types" >&5
echo "configure:2438: checking for built-in g77 integer types" >&5
if eval "test \"`echo '$''{'libf2c_cv_has_g77_builtin_types'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2095 "configure"
#line 2443 "configure"
#include "confdefs.h"
int main() {
......@@ -2101,7 +2449,7 @@ __g77_longint g77l;
__g77_ulongint g77ul;
; return 0; }
EOF
if { (eval echo configure:2105: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:2453: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
libf2c_cv_has_g77_builtin_types=yes
else
......@@ -2127,107 +2475,6 @@ test -f libF77/makefile && mv libF77/makefile libF77/makefile.ori
test -f libI77/makefile && mv libI77/makefile libI77/makefile.ori
test -f libU77/makefile && mv libU77/makefile libU77/makefile.ori
# Get the version trigger filename from the toplevel
if [ "${with_gcc_version_trigger+set}" = set ]; then
gcc_version_trigger=$with_gcc_version_trigger
gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
else
gcc_version_trigger=
gcc_version=UNKNOWN
fi
# Do some error checking and defaulting for the host and target type.
# The inputs are:
# configure --host=HOST --target=TARGET --build=BUILD NONOPT
#
# The rules are:
# 1. You are not allowed to specify --host, --target, and nonopt at the
# same time.
# 2. Host defaults to nonopt.
# 3. If nonopt is not specified, then host defaults to the current host,
# as determined by config.guess.
# 4. Target and build default to nonopt.
# 5. If nonopt is not specified, then target and build default to host.
# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
case $host---$target---$nonopt in
NONE---*---* | *---NONE---* | *---*---NONE) ;;
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac
# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:2170: checking host system type" >&5
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
echo "configure:2191: checking target system type" >&5
target_alias=$target
case "$target_alias" in
NONE)
case $nonopt in
NONE) target_alias=$host_alias ;;
*) target_alias=$nonopt ;;
esac ;;
esac
target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:2209: checking build system type" >&5
build_alias=$build
case "$build_alias" in
NONE)
case $nonopt in
NONE) build_alias=$host_alias ;;
*) build_alias=$nonopt ;;
esac ;;
esac
build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
program_prefix=${target_alias}-
subdirs="libU77 libI77 libF77"
# Do Makefile first since g2c.h depends on it and shouldn't get an
......@@ -2378,36 +2625,43 @@ s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@EXEEXT@%$EXEEXT%g
s%@CC@%$CC%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@target@%$target%g
s%@target_alias@%$target_alias%g
s%@target_cpu@%$target_cpu%g
s%@target_vendor@%$target_vendor%g
s%@target_os@%$target_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@toplevel_srcdir@%$toplevel_srcdir%g
s%@glibcpp_builddir@%$glibcpp_builddir%g
s%@glibcpp_srcdir@%$glibcpp_srcdir%g
s%@LN_S@%$LN_S%g
s%@OBJEXT@%$OBJEXT%g
s%@RANLIB@%$RANLIB%g
s%@STRIP@%$STRIP%g
s%@LIBTOOL@%$LIBTOOL%g
s%@CC@%$CC%g
s%@AS@%$AS%g
s%@AR@%$AR%g
s%@RANLIB@%$RANLIB%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@SET_MAKE@%$SET_MAKE%g
s%@CPP@%$CPP%g
s%@EXEEXT@%$EXEEXT%g
s%@gcc_version@%$gcc_version%g
s%@gcc_version_trigger@%$gcc_version_trigger%g
s%@target@%$target%g
s%@target_alias@%$target_alias%g
s%@target_cpu@%$target_cpu%g
s%@target_vendor@%$target_vendor%g
s%@target_os@%$target_os%g
s%@glibcpp_prefixdir@%$glibcpp_prefixdir%g
s%@glibcpp_toolexecdir@%$glibcpp_toolexecdir%g
s%@glibcpp_toolexeclibdir@%$glibcpp_toolexeclibdir%g
s%@OBJEXT@%$OBJEXT%g
s%@STRIP@%$STRIP%g
s%@LIBTOOL@%$LIBTOOL%g
s%@SET_MAKE@%$SET_MAKE%g
s%@CPP@%$CPP%g
s%@subdirs@%$subdirs%g
CEOF
......@@ -2517,8 +2771,8 @@ target=${target}
with_target_subdir=${with_target_subdir}
with_multisubdir=${with_multisubdir}
ac_configure_args="--enable-multilib ${ac_configure_args}"
toplevel_srcdir=${toplevel_srcdir}
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
topsrcdir=${topsrcdir}
EOF
cat >> $CONFIG_STATUS <<\EOF
......@@ -2527,7 +2781,7 @@ if test -n "$CONFIG_FILES"; then
if test -n "${with_target_subdir}"; then
# FIXME: We shouldn't need to set ac_file
ac_file=Makefile
. ${topsrcdir}/config-ml.in
. ${toplevel_srcdir}/config-ml.in
touch g2c.h # to keep it more recent than Makefile
fi
fi
......
libf2c/configure.in
......@@ -22,18 +22,12 @@
AC_PREREQ(2.13)
AC_INIT(libF77/Version.c)
if test "${srcdir}" = "." ; then
if test "${with_target_subdir}" != "." ; then
topsrcdir=${with_multisrctop}../..
else
topsrcdir=${with_multisrctop}..
fi
else
topsrcdir=${srcdir}/..
fi
dnl This is needed for a multilibbed build in the source tree so
dnl that install-sh and config.sub get found.
AC_CONFIG_AUX_DIR($topsrcdir)
AC_CANONICAL_SYSTEM
target_alias=${target_alias-$target}
AC_SUBST(target_alias)
GLIBCPP_CONFIGURE(.)
GLIBCPP_EXPORT_INSTALL_INFO
# If the language specific compiler does not exist, but the "gcc" directory
# does, we do not build anything. Note, $r is set by the top-level Makefile.
......@@ -65,29 +59,6 @@ fi
dnl Checks for programs.
dnl FIXME AC_PROG_CC wants CC to be able to link things, but it may
dnl not be able to.
define([AC_PROG_CC_WORKS],[])
# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
# at least currently, we never actually build a program, so we never
# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
# fails, because we are probably configuring with a cross compiler
# which cant create executables. So we include AC_EXEEXT to keep
# automake happy, but we dont execute it, since we dont care about
# the result.
if false; then
# autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
# to nothing, so nothing would remain between `then' and `fi' if it
# were not for the `:' below.
:
AC_EXEEXT
fi
# For g77 we'll set CC to point at the built gcc, but this will get it into
# the makefiles
AC_PROG_CC
AM_PROG_LIBTOOL
dnl These should be inherited in the recursive make, but ensure they are
......@@ -135,19 +106,6 @@ test -f libF77/makefile && mv libF77/makefile libF77/makefile.ori
test -f libI77/makefile && mv libI77/makefile libI77/makefile.ori
test -f libU77/makefile && mv libU77/makefile libU77/makefile.ori
# Get the version trigger filename from the toplevel
if [[ "${with_gcc_version_trigger+set}" = set ]]; then
gcc_version_trigger=$with_gcc_version_trigger
gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
else
gcc_version_trigger=
gcc_version=UNKNOWN
fi
AC_SUBST(gcc_version)
AC_SUBST(gcc_version_trigger)
AC_CANONICAL_SYSTEM
AC_SUBST(target_alias)
AC_CONFIG_SUBDIRS(libU77 libI77 libF77)
# Do Makefile first since g2c.h depends on it and shouldn't get an
# earlier timestamp. Of course, it does when the multilib gunk below
......@@ -158,7 +116,7 @@ if test -n "$CONFIG_FILES"; then
if test -n "${with_target_subdir}"; then
# FIXME: We shouldn't need to set ac_file
ac_file=Makefile
. ${topsrcdir}/config-ml.in
. ${toplevel_srcdir}/config-ml.in
touch g2c.h # to keep it more recent than Makefile
fi
fi],
......@@ -168,8 +126,8 @@ target=${target}
with_target_subdir=${with_target_subdir}
with_multisubdir=${with_multisubdir}
ac_configure_args="--enable-multilib ${ac_configure_args}"
toplevel_srcdir=${toplevel_srcdir}
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
topsrcdir=${topsrcdir}
)
......
libf2c/libU77/configure
......@@ -1085,7 +1085,7 @@ else
int main() {
/* Ultrix mips cc rejects this. */
typedef int charset[2]; const charset x = {0,0};
typedef int charset[2]; const charset x;
/* SunOS 4.1.1 cc rejects this. */
char const *const *ccp;
char **p;
......@@ -1486,7 +1486,187 @@ fi
done
LIBU77_GETTIMEOFDAY
for ac_func in gettimeofday
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:1494: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1499 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif
; return 0; }
EOF
if { (eval echo configure:1522: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
if test "$ac_cv_func_gettimeofday" = yes; then
echo $ac_n "checking for struct timezone""... $ac_c" 1>&6
echo "configure:1548: checking for struct timezone" >&5
if eval "test \"`echo '$''{'g77_cv_struct_timezone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1553 "configure"
#include "confdefs.h"
#include <sys/time.h>
int main() {
struct timezone tz;
; return 0; }
EOF
if { (eval echo configure:1560: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
g77_cv_struct_timezone=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
g77_cv_struct_timezone=no
fi
rm -f conftest*
fi
echo "$ac_t""$g77_cv_struct_timezone" 1>&6
if test $g77_cv_struct_timezone = yes; then
if test "$cross_compiling" = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_TIMEZONE 1
EOF
else
cat > conftest.$ac_ext <<EOF
#line 1581 "configure"
#include "confdefs.h"
#ifdef TIME_WITH_SYS_TIME
#include <sys/time.h>
#include <time.h>
#else
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#else
#include <time.h>
#endif
#endif
main ()
{
struct timeval time;
struct timezone dummy;
if (gettimeofday (&time, &dummy))
exit (1);
else
exit (0);
}
EOF
if { (eval echo configure:1604: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
cat >> confdefs.h <<\EOF
#define HAVE_TIMEZONE 1
EOF
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -fr conftest*
fi
fi
echo $ac_n "checking whether gettimeofday can accept two arguments""... $ac_c" 1>&6
echo "configure:1620: checking whether gettimeofday can accept two arguments" >&5
if eval "test \"`echo '$''{'emacs_cv_gettimeofday_two_arguments'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1625 "configure"
#include "confdefs.h"
#ifdef TIME_WITH_SYS_TIME
#include <sys/time.h>
#include <time.h>
#else
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#else
#include <time.h>
#endif
#endif
int main() {
struct timeval time;
#ifdef HAVE_TIMEZONE
struct timezone dummy;
#define DUMMY &dummy
#else
#define DUMMY NULL
#endif
gettimeofday (&time, DUMMY);
; return 0; }
EOF
if { (eval echo configure:1651: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
emacs_cv_gettimeofday_two_arguments=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
emacs_cv_gettimeofday_two_arguments=no
fi
rm -f conftest*
fi
echo "$ac_t""$emacs_cv_gettimeofday_two_arguments" 1>&6
if test $emacs_cv_gettimeofday_two_arguments = no; then
cat >> confdefs.h <<\EOF
#define GETTIMEOFDAY_ONE_ARGUMENT 1
EOF
fi
fi
test $ac_cv_func_symlink = yes && MAYBES="$MAYBES symlnk_.o"
test $ac_cv_func_lstat = yes && MAYBES="$MAYBES lstat_.o"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment