Skip to content

R
riscv-gcc-1
Commit c3880e45 by Manfred Hollstein Committed by Jeff Law
Options

config.shared: Emit everything which needs to be re-definable via file descriptor 1... 

        * config.shared: Emit everything which needs to be re-definable
        via file descriptor 1; the generic stuff is emitted using redirection
        onto fd 2.
        * configure.in (package_makefile_rules_frag): New variable
        which is used in the call to config.shared; redirect file descriptor 2
        to ${package_makefile_rules_frag}.

From-SVN: r17523
parent 59739e3c
Showing with 193 additions and 175 deletions
libio/ChangeLog
Tue Jan 27 23:26:07 1998 Manfred Hollstein <manfred@s-direktnet.de>
* config.shared: Emit everything which needs to be re-definable
via file descriptor 1; the generic stuff is emitted using redirection
onto fd 2.
* configure.in (package_makefile_rules_frag): New variable
which is used in the call to config.shared; redirect file descriptor 2
to ${package_makefile_rules_frag}.
Tue Jan 27 10:35:22 1998 H.J. Lu (hjl@gnu.org)
* configure.in (topsrcdir): New.
......
libio/config.shared
# Copyright (C) 1993, 1995, 1997 Free Software Foundation
# Copyright (C) 1993, 1995, 1997, 1998 Free Software Foundation
#
# This file is part of the GNU IO Library. This library is free
# software; you can redistribute it and/or modify it under the
......@@ -15,6 +15,10 @@
# along with GNU CC; see the file COPYING. If not, write to
# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
# File descriptor usage:
# 1: All macros which need to be re-definable by any target fragments
# 2: All generic rules; especially those which use re-defined macros, e.g. _G_CONFIG_H!
# Significant variables:
# Note that TO_TOPDIR does *not* include multilib.
......@@ -33,6 +37,8 @@ THIS_FILE="${srcdir}/${TOLIBGXX}config.shared"
echo "# Start of package fragment generated by ${THIS_FILE}."
echo ""
echo >&2 "# Start of package rules fragment generated by ${THIS_FILE}."
echo >&2 ""
# Multilib support.
echo 'MULTISRCTOP ='
......@@ -175,107 +181,107 @@ fi
ALL='$(PICDIR)'" ${ALL}"
echo "all: ${ALL} multi-all"
echo >&2 "all: ${ALL} multi-all"
if [ "${SUBDIRS}" != "" ] ; then
echo ' @rootme=`pwd`/; export rootme; \'
echo ' $(MAKE) "DODIRS=$(SUBDIRS)" DO=all $(FLAGS_TO_PASS) subdir_do'
echo >&2 ' @rootme=`pwd`/; export rootme; \'
echo >&2 ' $(MAKE) "DODIRS=$(SUBDIRS)" DO=all $(FLAGS_TO_PASS) subdir_do'
fi
echo '.PHONY: all'
echo ''
echo >&2 '.PHONY: all'
echo >&2 ''
echo '.PHONY: multi-all'
echo 'multi-all:'
echo ' @$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=all'
echo ''
echo >&2 '.PHONY: multi-all'
echo >&2 'multi-all:'
echo >&2 ' @$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=all'
echo >&2 ''
echo
echo >&2
if [ "${SUBDIRS}" != "" ] ; then
echo '.PHONY: subdir_do'
echo 'subdir_do: force'
echo ' @rootme=`pwd`/; export rootme; \'
echo ' for i in $(DODIRS); do \'
echo ' if [ -f ./$$i/Makefile ] ; then \'
echo ' echo "cd $$i; make $(DO) ..." ; \'
echo ' (cd $$i ; $(MAKE) $(FLAGS_TO_PASS) $(DO)) || exit 1 ; \'
echo ' else true ; fi ; \'
echo ' done'
echo ''
echo '# List of variables to pass to sub-makes. This should not be needed'
echo '# by GNU make or Sun make (both of which pass command-line variable'
echo '# overrides thouh $(MAKE)) but may be needed by older versions.'
echo ''
echo 'FLAGS_TO_PASS= \'
echo ' "SHELL=$(SHELL)" \'
echo ' "INSTALL=$(INSTALL)" \'
echo ' "INSTALL_DATA=$(INSTALL_DATA)" \'
echo ' "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \'
echo ' "prefix=$(prefix)" \'
echo ' "exec_prefix=$(exec_prefix)" \'
echo ' "tooldir=$(tooldir)" \'
echo ' "AR=$(AR)" \'
echo ' "AR_FLAGS=$(AR_FLAGS)" \'
echo ' "CC=$(CC)" \'
echo ' "CXX=$(CXX)" \'
echo ' "CFLAGS=$(CFLAGS)" \'
echo ' "CXXFLAGS=$(CXXFLAGS)" \'
echo ' "NM=$(NM)" \'
echo ' "RANLIB=$(RANLIB)" \'
echo ' "LIBCFLAGS=$(LIBCFLAGS)" \'
echo ' "LIBCXXFLAGS=$(LIBCXXFLAGS)" \'
echo ' "LOADLIBES=$(LOADLIBES)" \'
echo ' "LDFLAGS=$(LDFLAGS)" \'
echo ' "MAKEINFO=$(MAKEINFO)" \'
echo ' "SHLIB=$(SHLIB)" \'
echo ' "SHCURSES=$(SHCURSES)" \'
echo ' "PICFLAG=$(PICFLAG)" \'
echo ' "RUNTESTFLAGS=$(RUNTESTFLAGS)"'
echo >&2 '.PHONY: subdir_do'
echo >&2 'subdir_do: force'
echo >&2 ' @rootme=`pwd`/; export rootme; \'
echo >&2 ' for i in $(DODIRS); do \'
echo >&2 ' if [ -f ./$$i/Makefile ] ; then \'
echo >&2 ' echo "cd $$i; make $(DO) ..." ; \'
echo >&2 ' (cd $$i ; $(MAKE) $(FLAGS_TO_PASS) $(DO)) || exit 1 ; \'
echo >&2 ' else true ; fi ; \'
echo >&2 ' done'
echo >&2 ''
echo >&2 '# List of variables to pass to sub-makes. This should not be needed'
echo >&2 '# by GNU make or Sun make (both of which pass command-line variable'
echo >&2 '# overrides thouh $(MAKE)) but may be needed by older versions.'
echo >&2 ''
echo >&2 'FLAGS_TO_PASS= \'
echo >&2 ' "SHELL=$(SHELL)" \'
echo >&2 ' "INSTALL=$(INSTALL)" \'
echo >&2 ' "INSTALL_DATA=$(INSTALL_DATA)" \'
echo >&2 ' "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \'
echo >&2 ' "prefix=$(prefix)" \'
echo >&2 ' "exec_prefix=$(exec_prefix)" \'
echo >&2 ' "tooldir=$(tooldir)" \'
echo >&2 ' "AR=$(AR)" \'
echo >&2 ' "AR_FLAGS=$(AR_FLAGS)" \'
echo >&2 ' "CC=$(CC)" \'
echo >&2 ' "CXX=$(CXX)" \'
echo >&2 ' "CFLAGS=$(CFLAGS)" \'
echo >&2 ' "CXXFLAGS=$(CXXFLAGS)" \'
echo >&2 ' "NM=$(NM)" \'
echo >&2 ' "RANLIB=$(RANLIB)" \'
echo >&2 ' "LIBCFLAGS=$(LIBCFLAGS)" \'
echo >&2 ' "LIBCXXFLAGS=$(LIBCXXFLAGS)" \'
echo >&2 ' "LOADLIBES=$(LOADLIBES)" \'
echo >&2 ' "LDFLAGS=$(LDFLAGS)" \'
echo >&2 ' "MAKEINFO=$(MAKEINFO)" \'
echo >&2 ' "SHLIB=$(SHLIB)" \'
echo >&2 ' "SHCURSES=$(SHCURSES)" \'
echo >&2 ' "PICFLAG=$(PICFLAG)" \'
echo >&2 ' "RUNTESTFLAGS=$(RUNTESTFLAGS)"'
fi
echo 'NOSTDINC = -nostdinc++'
echo >&2 'NOSTDINC = -nostdinc++'
if test -n "${XCXXINCLUDES}" ; then
echo "CXXINCLUDES = ${XCXXINCLUDES} "'$(NOSTDINC)'
echo >&2 "CXXINCLUDES = ${XCXXINCLUDES} "'$(NOSTDINC)'
elif test "${DOING_LIBGXX}" = "true" ; then
echo 'CXXINCLUDES = $(NOSTDINC) -I. -I'"${TO_TOPDIR}libio"' -I$(srcdir) -I$(srcdir)/'"${TOLIBGXX}"'$(IO_DIR) -I$(srcdir)/'"${TOLIBGXX}"'../libstdc++ -I$(srcdir)/'"${TOLIBGXX}src"' $(WRAP_C_INCLUDES)'
echo >&2 'CXXINCLUDES = $(NOSTDINC) -I. -I'"${TO_TOPDIR}libio"' -I$(srcdir) -I$(srcdir)/'"${TOLIBGXX}"'$(IO_DIR) -I$(srcdir)/'"${TOLIBGXX}"'../libstdc++ -I$(srcdir)/'"${TOLIBGXX}src"' $(WRAP_C_INCLUDES)'
fi
if test -n "${XCINCLUDES}" ; then
echo "CINCLUDES = ${XCINCLUDES}"
echo >&2 "CINCLUDES = ${XCINCLUDES}"
elif test "${DOING_LIBGXX}" = "true" ; then
echo 'CINCLUDES ='
echo >&2 'CINCLUDES ='
fi
if [ "${LIBDIR}" = "yes" ]; then
echo 'XCFLAGS = $(LIBCFLAGS)'
echo 'XCXXFLAGS = $(LIBCXXFLAGS)'
echo >&2 'XCFLAGS = $(LIBCFLAGS)'
echo >&2 'XCXXFLAGS = $(LIBCXXFLAGS)'
else
echo 'XCFLAGS = $(CFLAGS)'
echo 'XCXXFLAGS = $(CXXFLAGS)'
echo >&2 'XCFLAGS = $(CFLAGS)'
echo >&2 'XCXXFLAGS = $(CXXFLAGS)'
fi
echo '.SUFFIXES: .o .C .cc .c'
echo 'COMPILE.c = $(CC) -c $(XCFLAGS) $(CINCLUDES) $(MT_CFLAGS)'
echo '.c.o:'
echo >&2 '.SUFFIXES: .o .C .cc .c'
echo >&2 'COMPILE.c = $(CC) -c $(XCFLAGS) $(CINCLUDES) $(MT_CFLAGS)'
echo >&2 '.c.o:'
if [ "${LIBDIR}" = "yes" ]; then
echo ' test -z "$(PICFLAG)" ||\'
echo ' $(COMPILE.c) $(PICFLAG) $< -o pic/$@'
echo >&2 ' test -z "$(PICFLAG)" ||\'
echo >&2 ' $(COMPILE.c) $(PICFLAG) $< -o pic/$@'
fi
echo ' $(COMPILE.c) $<'
[ "${TOUCH_ON_COMPILE}" = "yes" ] && echo ' @touch stamp'
echo 'COMPILE.cc = $(CXX) -c $(XCXXFLAGS) $(CXXINCLUDES) $(MT_CFLAGS)'
echo '.C.o:'
echo >&2 ' $(COMPILE.c) $<'
[ "${TOUCH_ON_COMPILE}" = "yes" ] && echo >&2 ' @touch stamp'
echo >&2 'COMPILE.cc = $(CXX) -c $(XCXXFLAGS) $(CXXINCLUDES) $(MT_CFLAGS)'
echo >&2 '.C.o:'
if [ "${LIBDIR}" = "yes" ]; then
echo ' test -z "$(PICFLAG)" ||\'
echo ' $(COMPILE.cc) $(PICFLAG) $< -o pic/$@'
echo >&2 ' test -z "$(PICFLAG)" ||\'
echo >&2 ' $(COMPILE.cc) $(PICFLAG) $< -o pic/$@'
fi
echo ' $(COMPILE.cc) $<'
[ "${TOUCH_ON_COMPILE}" = "yes" ] && echo ' @touch stamp'
echo '.cc.o:'
echo >&2 ' $(COMPILE.cc) $<'
[ "${TOUCH_ON_COMPILE}" = "yes" ] && echo >&2 ' @touch stamp'
echo >&2 '.cc.o:'
if [ "${LIBDIR}" = "yes" ]; then
echo ' test -z "$(PICFLAG)" || \'
echo ' $(COMPILE.cc) $(PICFLAG) $< -o pic/$@'
echo >&2 ' test -z "$(PICFLAG)" || \'
echo >&2 ' $(COMPILE.cc) $(PICFLAG) $< -o pic/$@'
fi
echo ' $(COMPILE.cc) $<'
[ "${TOUCH_ON_COMPILE}" = "yes" ] && echo ' @touch stamp'
echo ''
echo >&2 ' $(COMPILE.cc) $<'
[ "${TOUCH_ON_COMPILE}" = "yes" ] && echo >&2 ' @touch stamp'
echo >&2 ''
if [ -n "${TARGETLIB}" ] ; then
echo TARGETLIB = ${TARGETLIB}
......@@ -285,111 +291,111 @@ if [ -n "${TARGETPROG}" ] ; then
fi
if [ "${LIBDIR}" = "yes" ]; then
echo ''
echo 'stamp-picdir:'
echo ' if [ -n "$(PICFLAG)" ] && [ ! -d pic ]; then \'
echo ' mkdir pic; \'
echo ' else true; fi'
echo ' touch stamp-picdir'
echo >&2 ''
echo >&2 'stamp-picdir:'
echo >&2 ' if [ -n "$(PICFLAG)" ] && [ ! -d pic ]; then \'
echo >&2 ' mkdir pic; \'
echo >&2 ' else true; fi'
echo >&2 ' touch stamp-picdir'
fi
echo ''
echo '.PHONY: install'
echo 'install:'
echo '.PHONY: check'
echo >&2 ''
echo >&2 '.PHONY: install'
echo >&2 'install:'
echo >&2 '.PHONY: check'
if [ "${CHECK}" != "check" ] ; then
echo "check: ${ALL} ${CHECK}"
echo >&2 "check: ${ALL} ${CHECK}"
if [ "${CHECK_SUBDIRS}" != "" ] ; then
echo ' rootme=`pwd`/; export rootme; \'
echo ' SAVE_LLPATH="$${SAVE_LLPATH-$$LD_LIBRARY_PATH}"; export SAVE_LLPATH; \'
echo ' LD_LIBRARY_PATH="$${rootme}${TOLIBGXX}../libstdc++:$${rootme}${TOLIBGXX}../libg++:$$SAVE_LLPATH"; \'
echo ' export LD_LIBRARY_PATH; \'
echo ' $(MAKE) "DODIRS=$(CHECK_SUBDIRS)" DO=check $(FLAGS_TO_PASS) subdir_do'
echo >&2 ' rootme=`pwd`/; export rootme; \'
echo >&2 ' SAVE_LLPATH="$${SAVE_LLPATH-$$LD_LIBRARY_PATH}"; export SAVE_LLPATH; \'
echo >&2 ' LD_LIBRARY_PATH="$${rootme}${TOLIBGXX}../libstdc++:$${rootme}${TOLIBGXX}../libg++:$$SAVE_LLPATH"; \'
echo >&2 ' export LD_LIBRARY_PATH; \'
echo >&2 ' $(MAKE) "DODIRS=$(CHECK_SUBDIRS)" DO=check $(FLAGS_TO_PASS) subdir_do'
fi
fi
# Generate rules for documentation (depending on INFO_FILES and INFO_SUBDIRS).
echo '.PHONY: info dvi install-info clean-info'
echo >&2 '.PHONY: info dvi install-info clean-info'
# emit the rule for 'info'
# (Note that the top-level ../Makefile.in greps for '^info:' when making
# a release (in "make taz"), so don't break that!)
if [ -z "${INFO_FILES}" ] ; then
echo 'info:'
echo >&2 'info:'
else
echo info: `for file in ${INFO_FILES} ; do echo $file.info ; done`
echo >&2 info: `for file in ${INFO_FILES} ; do echo $file.info ; done`
fi
if [ "${INFO_SUBDIRS}" != "" ] ; then
echo ' @rootme=`pwd`/; export rootme; \
echo >&2 ' @rootme=`pwd`/; export rootme; \
$(MAKE) "DODIRS='${INFO_SUBDIRS}'" DO=info $(FLAGS_TO_PASS) subdir_do'
fi
# emit the rule for 'dvi'
if [ -z "${INFO_FILES}" ] ; then
echo 'dvi:'
echo >&2 'dvi:'
else
echo dvi: `for file in ${INFO_FILES} ; do echo $file.dvi ; done`
echo >&2 dvi: `for file in ${INFO_FILES} ; do echo $file.dvi ; done`
fi
if [ "${INFO_SUBDIRS}" != "" ] ; then
echo ' @rootme=`pwd`/; export rootme; \
echo >&2 ' @rootme=`pwd`/; export rootme; \
$(MAKE) "DODIRS='${INFO_SUBDIRS}'" DO=dvi $(FLAGS_TO_PASS) subdir_do'
fi
# Emit rules for each *.info and *.dvi file
for file in ${INFO_FILES} ; do
echo ${file}.info: '$(srcdir)'/${file}.texi
echo ' $(MAKEINFO) -I$(srcdir) -I$(TEXIDIR) $(srcdir)/'${file}.texi -o ${file}.info
echo ${file}.dvi: '$(srcdir)'/${file}.texi
echo ' $(TEXI2DVI) $(srcdir)'/${file}.texi
echo "${file}.ps: ${file}.dvi"
echo " dvips ${file} -o"
echo >&2 ${file}.info: '$(srcdir)'/${file}.texi
echo >&2 ' $(MAKEINFO) -I$(srcdir) -I$(TEXIDIR) $(srcdir)/'${file}.texi -o ${file}.info
echo >&2 ${file}.dvi: '$(srcdir)'/${file}.texi
echo >&2 ' $(TEXI2DVI) $(srcdir)'/${file}.texi
echo >&2 "${file}.ps: ${file}.dvi"
echo >&2 " dvips ${file} -o"
done
# emit the rule for install-info
echo 'install-info:'
echo >&2 'install-info:'
if [ -n "${INFO_FILES}" ] ; then
echo ' -parent=`echo $(infodir)|sed -e' "'"'s@/[^/]*$$@@'"'"'`; \'
echo ' if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi'
echo ' -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; fi'
echo ' for i in *.info* ; do \'
echo ' $(INSTALL_DATA) $$i $(infodir)/$$i ; \'
echo ' done'
echo >&2 ' -parent=`echo $(infodir)|sed -e' "'"'s@/[^/]*$$@@'"'"'`; \'
echo >&2 ' if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi'
echo >&2 ' -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; fi'
echo >&2 ' for i in *.info* ; do \'
echo >&2 ' $(INSTALL_DATA) $$i $(infodir)/$$i ; \'
echo >&2 ' done'
fi
if [ "${INFO_SUBDIRS}" != "" ] ; then
echo ' @rootme=`pwd`/; export rootme; \
echo >&2 ' @rootme=`pwd`/; export rootme; \
$(MAKE) "DODIRS='${INFO_SUBDIRS}'" DO=install-info $(FLAGS_TO_PASS) subdir_do'
fi
# emit clean-info and clean-dvi rules
echo '.PHONY: do-clean-info clean-info do-clean-dvi clean-dvi'
echo do-clean-info:
echo >&2 '.PHONY: do-clean-info clean-info do-clean-dvi clean-dvi'
echo >&2 do-clean-info:
if [ -n "${INFO_FILES}" ] ; then
echo ' rm -f *.info*'
echo >&2 ' rm -f *.info*'
fi
echo 'do-clean-dvi:'
echo >&2 'do-clean-dvi:'
if [ -n "${INFO_FILES}" ] ; then
echo ' rm -f *.dvi *.aux *.cp *.cps *.fn* *.ky *.log *.pg *.toc *.tp *.vr'
echo >&2 ' rm -f *.dvi *.aux *.cp *.cps *.fn* *.ky *.log *.pg *.toc *.tp *.vr'
fi
for type in info dvi ; do
echo clean-${type}: do-clean-${type}
echo >&2 clean-${type}: do-clean-${type}
if [ "${INFO_SUBDIRS}" != "" ] ; then
echo ' @rootme=`pwd`/; export rootme; \
echo >&2 ' @rootme=`pwd`/; export rootme; \
$(MAKE) "DODIRS='${NFO_SUBDIRS}'" DO=clean-'${type} '$(FLAGS_TO_PASS) subdir_do'
fi
done
echo ''
echo >&2 ''
echo '.PHONY: boltcc'
echo 'boltcc:'
echo ' rootme=`pwd`/ ; export rootme ; $(MAKE) $(FLAGS_TO_PASS)'
echo ''
echo >&2 '.PHONY: boltcc'
echo >&2 'boltcc:'
echo >&2 ' rootme=`pwd`/ ; export rootme ; $(MAKE) $(FLAGS_TO_PASS)'
echo >&2 ''
# Emit clean rules
echo ''
echo '# clean rules'
echo >&2 ''
echo >&2 '# clean rules'
MOSTLYCLEAN="${MOSTLYCLEAN-*.o pic stamp-picdir core ${EXTRA_MOSTLYCLEAN}} `if test -n "${TOUCH_ON_COMPILE}"; then echo stamp; else true; fi`"
CLEAN="${CLEAN-${TARGETPROG} ${TARGETLIB}}"
......@@ -397,55 +403,55 @@ DISTCLEAN="${DISTCLEAN-config.status Makefile *~ Make.pack target-mkfrag multili
REALCLEAN="${REALCLEAN-depend *.info*}"
echo '.PHONY: mostlyclean clean distclean maintainer-clean realclean'
echo >&2 '.PHONY: mostlyclean clean distclean maintainer-clean realclean'
if test -z "${SUBDIRS}" ; then
echo "mostlyclean: clean-dvi"
echo " rm -rf ${MOSTLYCLEAN}"
echo ' @$(MULTICLEAN) multi-clean DO=mostlyclean'
echo "clean: clean-dvi"
echo " rm -rf ${MOSTLYCLEAN} ${CLEAN}"
echo ' @$(MULTICLEAN) multi-clean DO=clean'
echo "distclean: clean"
echo ' @$(MULTICLEAN) multi-clean DO=distclean'
echo " rm -rf ${DISTCLEAN}"
echo "maintainer-clean realclean: clean clean-info"
echo ' @$(MULTICLEAN) multi-clean DO=maintainer-clean'
echo " rm -rf ${DISTCLEAN} ${REALCLEAN}"
echo >&2 "mostlyclean: clean-dvi"
echo >&2 " rm -rf ${MOSTLYCLEAN}"
echo >&2 ' @$(MULTICLEAN) multi-clean DO=mostlyclean'
echo >&2 "clean: clean-dvi"
echo >&2 " rm -rf ${MOSTLYCLEAN} ${CLEAN}"
echo >&2 ' @$(MULTICLEAN) multi-clean DO=clean'
echo >&2 "distclean: clean"
echo >&2 ' @$(MULTICLEAN) multi-clean DO=distclean'
echo >&2 " rm -rf ${DISTCLEAN}"
echo >&2 "maintainer-clean realclean: clean clean-info"
echo >&2 ' @$(MULTICLEAN) multi-clean DO=maintainer-clean'
echo >&2 " rm -rf ${DISTCLEAN} ${REALCLEAN}"
else
echo '.PHONY: do-clean subdir_distclean subdir_maintainer_clean'
echo "mostlyclean: do-clean-dvi"
echo " rm -rf ${MOSTLYCLEAN}"
echo ' @$(MAKE) $(FLAGS_TO_PASS) "DODIRS=$(SUBDIRS)" DO=mostlyclean subdir_do'
echo ' @$(MULTICLEAN) multi-clean DO=mostlyclean'
echo "do-clean: do-clean-dvi"
echo " rm -rf ${MOSTLYCLEAN} ${CLEAN}"
echo "clean: do-clean"
echo ' @$(MAKE) $(FLAGS_TO_PASS) "DODIRS=$(SUBDIRS)" DO=clean subdir_do'
echo ' @$(MULTICLEAN) multi-clean DO=clean'
echo >&2 '.PHONY: do-clean subdir_distclean subdir_maintainer_clean'
echo >&2 "mostlyclean: do-clean-dvi"
echo >&2 " rm -rf ${MOSTLYCLEAN}"
echo >&2 ' @$(MAKE) $(FLAGS_TO_PASS) "DODIRS=$(SUBDIRS)" DO=mostlyclean subdir_do'
echo >&2 ' @$(MULTICLEAN) multi-clean DO=mostlyclean'
echo >&2 "do-clean: do-clean-dvi"
echo >&2 " rm -rf ${MOSTLYCLEAN} ${CLEAN}"
echo >&2 "clean: do-clean"
echo >&2 ' @$(MAKE) $(FLAGS_TO_PASS) "DODIRS=$(SUBDIRS)" DO=clean subdir_do'
echo >&2 ' @$(MULTICLEAN) multi-clean DO=clean'
# distclean and maintainer-clean are tricky because they remove the Makefile.
echo "subdir_distclean:"
echo ' @$(MAKE) $(FLAGS_TO_PASS) "DODIRS=$(SUBDIRS)" DO=distclean subdir_do'
echo "distclean: do-clean subdir_distclean"
echo ' @$(MULTICLEAN) multi-clean DO=distclean'
echo " rm -rf ${DISTCLEAN}"
echo "subdir_maintainer_clean:"
echo ' @$(MAKE) $(FLAGS_TO_PASS) "DODIRS=$(SUBDIRS)" DO=maintainer-clean subdir_do'
echo "maintainer-clean realclean: do-clean subdir_maintainer_clean do-clean-info"
echo ' @$(MULTICLEAN) multi-clean DO=maintainer-clean'
echo " rm -rf ${DISTCLEAN} ${REALCLEAN}"
echo >&2 "subdir_distclean:"
echo >&2 ' @$(MAKE) $(FLAGS_TO_PASS) "DODIRS=$(SUBDIRS)" DO=distclean subdir_do'
echo >&2 "distclean: do-clean subdir_distclean"
echo >&2 ' @$(MULTICLEAN) multi-clean DO=distclean'
echo >&2 " rm -rf ${DISTCLEAN}"
echo >&2 "subdir_maintainer_clean:"
echo >&2 ' @$(MAKE) $(FLAGS_TO_PASS) "DODIRS=$(SUBDIRS)" DO=maintainer-clean subdir_do'
echo >&2 "maintainer-clean realclean: do-clean subdir_maintainer_clean do-clean-info"
echo >&2 ' @$(MULTICLEAN) multi-clean DO=maintainer-clean'
echo >&2 " rm -rf ${DISTCLEAN} ${REALCLEAN}"
fi
echo ''
echo '.PHONY: force'
echo 'force:'
echo ''
echo '# with the gnu make, this is done automatically.'
echo ''
echo 'Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)'
echo ' $(SHELL) ./config.status'
echo ''
echo '.NOEXPORT:'
echo 'MAKEOVERRIDES='
echo >&2 ''
echo >&2 '.PHONY: force'
echo >&2 'force:'
echo >&2 ''
echo >&2 '# with the gnu make, this is done automatically.'
echo >&2 ''
echo >&2 'Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)'
echo >&2 ' $(SHELL) ./config.status'
echo >&2 ''
echo >&2 '.NOEXPORT:'
echo >&2 'MAKEOVERRIDES='
cat <<"EOF"
DEPEND_SOURCES = ${srcdir}/*.cc ${srcdir}/*.c
......@@ -480,7 +486,8 @@ $(srcdir)/depend: depend.new
EOF
if [ -f ${srcdir}/${subdir}/depend ] ; then
cat ${srcdir}/${subdir}/depend
cat ${srcdir}/${subdir}/depend >&2
fi
echo "# End of package fragment generated by ${THIS_FILE}."
echo >&2 "# End of package rules fragment generated by ${THIS_FILE}."
libio/configure.in
......@@ -20,6 +20,7 @@ fi
srctrigger=libioP.h
srcname="input/output library"
package_makefile_frag=Make.pack
package_makefile_rules_frag=Make.pack.r
# per-host:
......@@ -115,7 +116,7 @@ INFO_FILES=iostream
if [ -n "${with_cross_host}" -a -d ${topsrcdir}/gcc ]; then
CHECK_SUBDIRS=testsuite
fi
(. ${srcdir}/config.shared) >${package_makefile_frag}
(. ${srcdir}/config.shared) >${package_makefile_frag} 2>${package_makefile_rules_frag}
# post-target:
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment