Skip to content

R
riscv-gcc-1
Commit bf1d3e81 by Nathanael Nerode
Options

configure.in: Disable serial configure by default. 

	* configure.in: Disable serial configure by default.
	* configure: Regenerate.
	* Makefile.tpl: Abolish .NOTPARALLEL.
	* Makefile.in: Regenerate.

From-SVN: r67747
parent ca895f7d
Showing with 70 additions and 67 deletions
ChangeLog
2003-06-10 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.in: Disable serial configure by default.
* configure: Regenerate.
* Makefile.tpl: Abolish .NOTPARALLEL.
* Makefile.in: Regenerate.
* Makefile.tpl: Replace {build,host,target}_canonical by
{build,host,target}.
* Makefile.in: Regenerate.
......
Makefile.in
......@@ -17293,7 +17293,7 @@ clean-target-libgcc:
.PHONY: check do-check
check:
$(MAKE) do-check NOTPARALLEL=parallel-ok
$(MAKE) do-check
# Only include modules actually being configured and built.
do-check: maybe-check-gcc \
......@@ -23693,7 +23693,7 @@ check-gcc-c++:
.PHONY: check-c++
check-c++:
$(MAKE) check-target-libstdc++-v3 check-gcc-c++ NOTPARALLEL=parallel-ok
$(MAKE) check-target-libstdc++-v3 check-gcc-c++
.PHONY: install-gcc maybe-install-gcc
maybe-install-gcc:
......@@ -23890,12 +23890,6 @@ $(srcdir)/configure: @MAINT@ $(srcdir)/configure.in $(srcdir)/config/acx.m4
# Special directives to GNU Make
# ------------------------------
# Tell GNU make 3.79 not to run the top level in parallel. This
# prevents contention for $builddir/$target/config.cache, as well
# as minimizing scatter in file system caches.
NOTPARALLEL = .NOTPARALLEL
$(NOTPARALLEL):
# Don't pass command-line variables to submakes.
.NOEXPORT:
MAKEOVERRIDES=
......
Makefile.tpl
......@@ -731,7 +731,7 @@ clean-target-libgcc:
.PHONY: check do-check
check:
$(MAKE) do-check NOTPARALLEL=parallel-ok
$(MAKE) do-check
# Only include modules actually being configured and built.
do-check: maybe-check-gcc [+
......@@ -1298,7 +1298,7 @@ check-gcc-c++:
.PHONY: check-c++
check-c++:
$(MAKE) check-target-libstdc++-v3 check-gcc-c++ NOTPARALLEL=parallel-ok
$(MAKE) check-target-libstdc++-v3 check-gcc-c++
.PHONY: install-gcc maybe-install-gcc
maybe-install-gcc:
......@@ -1495,12 +1495,6 @@ $(srcdir)/configure: @MAINT@ $(srcdir)/configure.in $(srcdir)/config/acx.m4
# Special directives to GNU Make
# ------------------------------
# Tell GNU make 3.79 not to run the top level in parallel. This
# prevents contention for $builddir/$target/config.cache, as well
# as minimizing scatter in file system caches.
NOTPARALLEL = .NOTPARALLEL
$(NOTPARALLEL):
# Don't pass command-line variables to submakes.
.NOEXPORT:
MAKEOVERRIDES=
......
configure
......@@ -12,10 +12,10 @@ ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
--disable-serial-[{host,target,build}-]configure
Don't force sequential configuration of
--enable-serial-[{host,target,build}-]configure
Force sequential configuration of
sub-packages for the host, target or build
machine, or of any sub-packages at all"
machine, or all sub-packages"
ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
......@@ -2390,13 +2390,20 @@ if test "${enable_serial_configure+set}" = set; then
fi
case ${enable_serial_configure} in
yes)
enable_serial_build_configure=yes
enable_serial_host_configure=yes
enable_serial_target_configure=yes
;;
esac
# These force 'configure's to be done one at a time, to avoid problems
# with contention over a shared config.cache.
rm -f serdep.tmp
echo '# serdep.tmp' > serdep.tmp
olditem=
test "x${enable_serial_configure}" = xno ||
test "x${enable_serial_build_configure}" = xno ||
test "x${enable_serial_build_configure}" = xyes &&
for item in ${build_configdirs} ; do
case ${olditem} in
"") ;;
......@@ -2405,8 +2412,7 @@ for item in ${build_configdirs} ; do
olditem=${item}
done
olditem=
test "x${enable_serial_configure}" = xno ||
test "x${enable_serial_host_configure}" = xno ||
test "x${enable_serial_host_configure}" = xyes &&
for item in ${configdirs} ; do
case ${olditem} in
"") ;;
......@@ -2415,8 +2421,7 @@ for item in ${configdirs} ; do
olditem=${item}
done
olditem=
test "x${enable_serial_configure}" = xno ||
test "x${enable_serial_target_configure}" = xno ||
test "x${enable_serial_target_configure}" = xyes &&
for item in ${target_configdirs} ; do
case ${olditem} in
"") ;;
......@@ -2692,7 +2697,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2696: checking for $ac_word" >&5
echo "configure:2701: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -2725,7 +2730,7 @@ if test -z "$ac_cv_prog_AR" ; then
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2729: checking for $ac_word" >&5
echo "configure:2734: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -2764,7 +2769,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2768: checking for $ac_word" >&5
echo "configure:2773: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -2797,7 +2802,7 @@ if test -z "$ac_cv_prog_AS" ; then
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2801: checking for $ac_word" >&5
echo "configure:2806: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -2836,7 +2841,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2840: checking for $ac_word" >&5
echo "configure:2845: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -2869,7 +2874,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2873: checking for $ac_word" >&5
echo "configure:2878: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -2908,7 +2913,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2912: checking for $ac_word" >&5
echo "configure:2917: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -2941,7 +2946,7 @@ if test -z "$ac_cv_prog_LD" ; then
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2945: checking for $ac_word" >&5
echo "configure:2950: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -2980,7 +2985,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2984: checking for $ac_word" >&5
echo "configure:2989: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3013,7 +3018,7 @@ if test -z "$ac_cv_prog_NM" ; then
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3017: checking for $ac_word" >&5
echo "configure:3022: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3052,7 +3057,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3056: checking for $ac_word" >&5
echo "configure:3061: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3085,7 +3090,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3089: checking for $ac_word" >&5
echo "configure:3094: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3124,7 +3129,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3128: checking for $ac_word" >&5
echo "configure:3133: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3157,7 +3162,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3161: checking for $ac_word" >&5
echo "configure:3166: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3196,7 +3201,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3200: checking for $ac_word" >&5
echo "configure:3205: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3229,7 +3234,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3233: checking for $ac_word" >&5
echo "configure:3238: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3268,7 +3273,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3272: checking for $ac_word" >&5
echo "configure:3277: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3301,7 +3306,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3305: checking for $ac_word" >&5
echo "configure:3310: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3349,7 +3354,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3353: checking for $ac_word" >&5
echo "configure:3358: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3382,7 +3387,7 @@ if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3386: checking for $ac_word" >&5
echo "configure:3391: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3421,7 +3426,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3425: checking for $ac_word" >&5
echo "configure:3430: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3454,7 +3459,7 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3458: checking for $ac_word" >&5
echo "configure:3463: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3493,7 +3498,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3497: checking for $ac_word" >&5
echo "configure:3502: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3526,7 +3531,7 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3530: checking for $ac_word" >&5
echo "configure:3535: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3565,7 +3570,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3569: checking for $ac_word" >&5
echo "configure:3574: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3598,7 +3603,7 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3602: checking for $ac_word" >&5
echo "configure:3607: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3637,7 +3642,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3641: checking for $ac_word" >&5
echo "configure:3646: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3670,7 +3675,7 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3674: checking for $ac_word" >&5
echo "configure:3679: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3709,7 +3714,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3713: checking for $ac_word" >&5
echo "configure:3718: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3742,7 +3747,7 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3746: checking for $ac_word" >&5
echo "configure:3751: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3781,7 +3786,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3785: checking for $ac_word" >&5
echo "configure:3790: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3814,7 +3819,7 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3818: checking for $ac_word" >&5
echo "configure:3823: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3881,7 +3886,7 @@ RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:3885: checking whether to enable maintainer-specific portions of Makefiles" >&5
echo "configure:3890: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
......
configure.in
......@@ -1698,18 +1698,25 @@ AC_SUBST_FILE(maybe_dependencies)
# Create the serialization dependencies. This uses a temporary file.
AC_ARG_ENABLE([serial-configure],
[ --disable-serial-[{host,target,build}-]configure
Don't force sequential configuration of
[ --enable-serial-[{host,target,build}-]configure
Force sequential configuration of
sub-packages for the host, target or build
machine, or of any sub-packages at all])
machine, or all sub-packages])
case ${enable_serial_configure} in
yes)
enable_serial_build_configure=yes
enable_serial_host_configure=yes
enable_serial_target_configure=yes
;;
esac
# These force 'configure's to be done one at a time, to avoid problems
# with contention over a shared config.cache.
rm -f serdep.tmp
echo '# serdep.tmp' > serdep.tmp
olditem=
test "x${enable_serial_configure}" = xno ||
test "x${enable_serial_build_configure}" = xno ||
test "x${enable_serial_build_configure}" = xyes &&
for item in ${build_configdirs} ; do
case ${olditem} in
"") ;;
......@@ -1718,8 +1725,7 @@ for item in ${build_configdirs} ; do
olditem=${item}
done
olditem=
test "x${enable_serial_configure}" = xno ||
test "x${enable_serial_host_configure}" = xno ||
test "x${enable_serial_host_configure}" = xyes &&
for item in ${configdirs} ; do
case ${olditem} in
"") ;;
......@@ -1728,8 +1734,7 @@ for item in ${configdirs} ; do
olditem=${item}
done
olditem=
test "x${enable_serial_configure}" = xno ||
test "x${enable_serial_target_configure}" = xno ||
test "x${enable_serial_target_configure}" = xyes &&
for item in ${target_configdirs} ; do
case ${olditem} in
"") ;;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment