Skip to content

R
riscv-gcc-1
Commit b8db17af by Janis Johnson Committed by Janis Johnson
Options

install.texi: Formatting changes for conformance to HTML 4.01. 

2002-10-15  Janis Johnson  <janis187@us.ibm.com>

	* doc/install.texi: Formatting changes for conformance to HTML 4.01.

From-SVN: r58164
parent dbd1e2d8
Showing with 86 additions and 158 deletions
gcc/ChangeLog
2002-10-15 Janis Johnson <janis187@us.ibm.com>
* doc/install.texi: Formatting changes for conformance to HTML 4.01.
2002-10-15 Ulrich Weigand <uweigand@de.ibm.com> 2002-10-15 Ulrich Weigand <uweigand@de.ibm.com>
PR opt/7409 PR opt/7409
......
gcc/doc/install.texi
...@@ -191,7 +191,7 @@ not yet been merged into the main part of this manual. ...@@ -191,7 +191,7 @@ not yet been merged into the main part of this manual.
@end ifhtml @end ifhtml
@html @html
<hr> <hr />
<p> <p>
@end html @end html
@ifhtml @ifhtml
...@@ -245,7 +245,7 @@ components of the binutils you intend to build alongside the compiler ...@@ -245,7 +245,7 @@ components of the binutils you intend to build alongside the compiler
@file{opcodes}, @dots{}) to the directory containing the GCC sources. @file{opcodes}, @dots{}) to the directory containing the GCC sources.
@html @html
<hr> <hr />
<p> <p>
@end html @end html
@ifhtml @ifhtml
...@@ -362,7 +362,6 @@ subdirectory of @var{objdir} or vice versa. ...@@ -362,7 +362,6 @@ subdirectory of @var{objdir} or vice versa.
These additional options control where certain parts of the distribution These additional options control where certain parts of the distribution
are installed. Normally you should not need to use these options. are installed. Normally you should not need to use these options.
@table @code @table @code
@item --exec-prefix=@var{dirname} @item --exec-prefix=@var{dirname}
Specify the toplevel installation directory for architecture-dependent Specify the toplevel installation directory for architecture-dependent
files. The default is @file{@var{prefix}}. files. The default is @file{@var{prefix}}.
...@@ -646,7 +645,6 @@ predefined set of them. ...@@ -646,7 +645,6 @@ predefined set of them.
Some targets provide finer-grained control over which multilibs are built Some targets provide finer-grained control over which multilibs are built
(e.g., @option{--disable-softfloat}): (e.g., @option{--disable-softfloat}):
@table @code @table @code
@item arc-*-elf* @item arc-*-elf*
biendian. biendian.
...@@ -911,7 +909,7 @@ Note that each @option{--enable} option has a corresponding ...@@ -911,7 +909,7 @@ Note that each @option{--enable} option has a corresponding
corresponding @option{--without} option. corresponding @option{--without} option.
@html @html
<hr> <hr />
<p> <p>
@end html @end html
@ifhtml @ifhtml
...@@ -1153,7 +1151,7 @@ Currently, when compiling the Ada front end, you cannot use the parallel ...@@ -1153,7 +1151,7 @@ Currently, when compiling the Ada front end, you cannot use the parallel
build feature described in the previous section. build feature described in the previous section.
@html @html
<hr> <hr />
<p> <p>
@end html @end html
@ifhtml @ifhtml
...@@ -1311,7 +1309,7 @@ few failing testcases are possible even on released versions and you ...@@ -1311,7 +1309,7 @@ few failing testcases are possible even on released versions and you
should look here first if you think your results are unreasonable. should look here first if you think your results are unreasonable.
@html @html
<hr> <hr />
<p> <p>
@end html @end html
@ifhtml @ifhtml
...@@ -1423,7 +1421,7 @@ Free Software Foundation}, though such manuals may not be for the most ...@@ -1423,7 +1421,7 @@ Free Software Foundation}, though such manuals may not be for the most
recent version of GCC@. recent version of GCC@.
@html @html
<hr> <hr />
<p> <p>
@end html @end html
@ifhtml @ifhtml
...@@ -1519,7 +1517,7 @@ bootstrapping the compiler. An updated version of that disk is in the ...@@ -1519,7 +1517,7 @@ bootstrapping the compiler. An updated version of that disk is in the
works. works.
@html @html
<hr> <hr />
<p> <p>
@end html @end html
@ifhtml @ifhtml
...@@ -1702,7 +1700,7 @@ GNU Compiler Collection on your machine. ...@@ -1702,7 +1700,7 @@ GNU Compiler Collection on your machine.
@html @html
<!-- -------- host/target specific issues start here ---------------- --> <!-- -------- host/target specific issues start here ---------------- -->
<hr> <hr />
@end html @end html
@heading @anchor{alpha*-*-*}alpha*-*-* @heading @anchor{alpha*-*-*}alpha*-*-*
...@@ -1717,8 +1715,7 @@ debugging information, not the least of which is incorrect linking of ...@@ -1717,8 +1715,7 @@ debugging information, not the least of which is incorrect linking of
shared libraries. shared libraries.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{alpha*-dec-osf*}alpha*-dec-osf* @heading @anchor{alpha*-dec-osf*}alpha*-dec-osf*
Systems using processors that implement the DEC Alpha architecture and Systems using processors that implement the DEC Alpha architecture and
...@@ -1802,8 +1799,7 @@ DBX@. DEC is now aware of this problem with the assembler and hopes to ...@@ -1802,8 +1799,7 @@ DBX@. DEC is now aware of this problem with the assembler and hopes to
provide a fix shortly. provide a fix shortly.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{alphaev5-cray-unicosmk*}alphaev5-cray-unicosmk* @heading @anchor{alphaev5-cray-unicosmk*}alphaev5-cray-unicosmk*
Cray T3E systems running Unicos/Mk. Cray T3E systems running Unicos/Mk.
...@@ -1830,16 +1826,14 @@ be able to work around this by doing @samp{make all} after getting this ...@@ -1830,16 +1826,14 @@ be able to work around this by doing @samp{make all} after getting this
failure. failure.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{arc-*-elf}arc-*-elf @heading @anchor{arc-*-elf}arc-*-elf
Argonaut ARC processor. Argonaut ARC processor.
This configuration is intended for embedded systems. This configuration is intended for embedded systems.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{arm-*-aout}arm-*-aout @heading @anchor{arm-*-aout}arm-*-aout
Advanced RISC Machines ARM-family processors. These are often used in Advanced RISC Machines ARM-family processors. These are often used in
...@@ -1851,23 +1845,20 @@ You may need to make a variant of the file @file{arm.h} for your particular ...@@ -1851,23 +1845,20 @@ You may need to make a variant of the file @file{arm.h} for your particular
configuration. configuration.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{arm-*-elf}arm-*-elf @heading @anchor{arm-*-elf}arm-*-elf
This configuration is intended for embedded systems. This configuration is intended for embedded systems.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{arm*-*-linux-gnu}arm*-*-linux-gnu @heading @anchor{arm*-*-linux-gnu}arm*-*-linux-gnu
We require GNU binutils 2.10 or newer. We require GNU binutils 2.10 or newer.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{avr}avr @heading @anchor{avr}avr
...@@ -1904,8 +1895,7 @@ The following error: ...@@ -1904,8 +1895,7 @@ The following error:
indicates that you should upgrade to a newer version of the binutils. indicates that you should upgrade to a newer version of the binutils.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{c4x}c4x @heading @anchor{c4x}c4x
...@@ -1935,8 +1925,7 @@ can also be obtained from: ...@@ -1935,8 +1925,7 @@ can also be obtained from:
@end itemize @end itemize
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{cris}CRIS @heading @anchor{cris}CRIS
...@@ -1974,8 +1963,7 @@ information about this platform is available at ...@@ -1974,8 +1963,7 @@ information about this platform is available at
@uref{http://developer.axis.com/}. @uref{http://developer.axis.com/}.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{dos}DOS @heading @anchor{dos}DOS
...@@ -1987,15 +1975,13 @@ compilation package DJGPP, which includes binaries as well as sources, ...@@ -1987,15 +1975,13 @@ compilation package DJGPP, which includes binaries as well as sources,
and includes all the necessary compilation tools and libraries. and includes all the necessary compilation tools and libraries.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{dsp16xx}dsp16xx @heading @anchor{dsp16xx}dsp16xx
A port to the AT&T DSP1610 family of processors. A port to the AT&T DSP1610 family of processors.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{*-*-freebsd*}*-*-freebsd* @heading @anchor{*-*-freebsd*}*-*-freebsd*
...@@ -2043,8 +2029,7 @@ the very least, both boehm-gc and libffi. ...@@ -2043,8 +2029,7 @@ the very least, both boehm-gc and libffi.
Shared @file{libgcc_s.so} is now built and installed by default. Shared @file{libgcc_s.so} is now built and installed by default.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{h8300-hms}h8300-hms @heading @anchor{h8300-hms}h8300-hms
Hitachi H8/300 series of processors. Hitachi H8/300 series of processors.
...@@ -2057,8 +2042,7 @@ first three arguments in function calls in registers. Structures are no ...@@ -2057,8 +2042,7 @@ first three arguments in function calls in registers. Structures are no
longer a multiple of 2 bytes. longer a multiple of 2 bytes.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{hppa*-hp-hpux*}hppa*-hp-hpux* @heading @anchor{hppa*-hp-hpux*}hppa*-hp-hpux*
...@@ -2093,8 +2077,7 @@ default scheduling model is desired. ...@@ -2093,8 +2077,7 @@ default scheduling model is desired.
More specific information to @samp{hppa*-hp-hpux*} targets follows. More specific information to @samp{hppa*-hp-hpux*} targets follows.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{hppa*-hp-hpux9}hppa*-hp-hpux9 @heading @anchor{hppa*-hp-hpux9}hppa*-hp-hpux9
...@@ -2110,8 +2093,7 @@ and @env{SHELL} to @file{/bin/ksh} in your environment. ...@@ -2110,8 +2093,7 @@ and @env{SHELL} to @file{/bin/ksh} in your environment.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{hppa*-hp-hpux10}hppa*-hp-hpux10 @heading @anchor{hppa*-hp-hpux10}hppa*-hp-hpux10
...@@ -2142,8 +2124,7 @@ bootstrap}. ...@@ -2142,8 +2124,7 @@ bootstrap}.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{hppa*-hp-hpux11}hppa*-hp-hpux11 @heading @anchor{hppa*-hp-hpux11}hppa*-hp-hpux11
...@@ -2182,16 +2163,14 @@ have been problems reported with various binary distributions. This ...@@ -2182,16 +2163,14 @@ have been problems reported with various binary distributions. This
port still is undergoing significant development. port still is undergoing significant development.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{i370-*-*}i370-*-* @heading @anchor{i370-*-*}i370-*-*
This port is very preliminary and has many known bugs. We hope to This port is very preliminary and has many known bugs. We hope to
have a higher-quality port for this machine soon. have a higher-quality port for this machine soon.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{*-*-linux-gnu}*-*-linux-gnu @heading @anchor{*-*-linux-gnu}*-*-linux-gnu
...@@ -2201,7 +2180,6 @@ The patch @uref{glibc-2.2.patch,,glibc-2.2.patch}, that is to be ...@@ -2201,7 +2180,6 @@ The patch @uref{glibc-2.2.patch,,glibc-2.2.patch}, that is to be
applied in the GCC source tree, fixes the compatibility problems. applied in the GCC source tree, fixes the compatibility problems.
@html @html
</p>
@end html @end html
@html @html
...@@ -2218,8 +2196,7 @@ glibc 2.2.4 whether patches for GCC 3.0 are needed. You can use glibc ...@@ -2218,8 +2196,7 @@ glibc 2.2.4 whether patches for GCC 3.0 are needed. You can use glibc
2.2.3 with GCC 3.0, just do not try to recompile it. 2.2.3 with GCC 3.0, just do not try to recompile it.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{ix86-*-linux*aout}i?86-*-linux*aout @heading @anchor{ix86-*-linux*aout}i?86-*-linux*aout
Use this configuration to generate @file{a.out} binaries on Linux-based Use this configuration to generate @file{a.out} binaries on Linux-based
...@@ -2227,8 +2204,7 @@ GNU systems. This configuration is being superseded. You must use ...@@ -2227,8 +2204,7 @@ GNU systems. This configuration is being superseded. You must use
gas/binutils version 2.5.2 or later. gas/binutils version 2.5.2 or later.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{ix86-*-linux*}i?86-*-linux* @heading @anchor{ix86-*-linux*}i?86-*-linux*
...@@ -2239,23 +2215,20 @@ possible you have a hardware problem. Further information on this can be ...@@ -2239,23 +2215,20 @@ possible you have a hardware problem. Further information on this can be
found on @uref{http://www.bitwizard.nl/sig11/,,www.bitwizard.nl}. found on @uref{http://www.bitwizard.nl/sig11/,,www.bitwizard.nl}.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{ix86-*-sco}i?86-*-sco @heading @anchor{ix86-*-sco}i?86-*-sco
Compilation with RCC is recommended. Also, it may be a good idea to Compilation with RCC is recommended. Also, it may be a good idea to
link with GNU malloc instead of the malloc that comes with the system. link with GNU malloc instead of the malloc that comes with the system.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{ix86-*-sco3.2v4}i?86-*-sco3.2v4 @heading @anchor{ix86-*-sco3.2v4}i?86-*-sco3.2v4
Use this configuration for SCO release 3.2 version 4. Use this configuration for SCO release 3.2 version 4.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{ix86-*-sco3.2v5*}i?86-*-sco3.2v5* @heading @anchor{ix86-*-sco3.2v5*}i?86-*-sco3.2v5*
Use this for the SCO OpenServer Release 5 family of operating systems. Use this for the SCO OpenServer Release 5 family of operating systems.
...@@ -2330,8 +2303,7 @@ engineering and will hopefully be addressed in later releases. ...@@ -2330,8 +2303,7 @@ engineering and will hopefully be addressed in later releases.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{ix86-*-udk}i?86-*-udk @heading @anchor{ix86-*-udk}i?86-*-udk
...@@ -2367,8 +2339,7 @@ have installed. ...@@ -2367,8 +2339,7 @@ have installed.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{ia64-*-linux}ia64-*-linux @heading @anchor{ia64-*-linux}ia64-*-linux
IA-64 processor (also known as IPF, or Itanium Processor Family) IA-64 processor (also known as IPF, or Itanium Processor Family)
...@@ -2392,8 +2363,7 @@ GCC 3.0.2 is believed to be fully ABI compliant, and hence no more major ...@@ -2392,8 +2363,7 @@ GCC 3.0.2 is believed to be fully ABI compliant, and hence no more major
ABI changes are expected. ABI changes are expected.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{*-lynx-lynxos}*-lynx-lynxos @heading @anchor{*-lynx-lynxos}*-lynx-lynxos
LynxOS 2.2 and earlier comes with GCC 1.x already installed as LynxOS 2.2 and earlier comes with GCC 1.x already installed as
...@@ -2404,8 +2374,7 @@ COFF format object files and executables; otherwise GCC will use the ...@@ -2404,8 +2374,7 @@ COFF format object files and executables; otherwise GCC will use the
installed tools, which produce @file{a.out} format executables. installed tools, which produce @file{a.out} format executables.
@html @html
</p> <hr />
<hr>
<!-- rs6000-ibm-aix*, powerpc-ibm-aix* --> <!-- rs6000-ibm-aix*, powerpc-ibm-aix* -->
@end html @end html
@heading @anchor{*-ibm-aix*}*-ibm-aix* @heading @anchor{*-ibm-aix*}*-ibm-aix*
...@@ -2514,8 +2483,7 @@ A default can be specified with the @option{-mcpu=@var{cpu_type}} ...@@ -2514,8 +2483,7 @@ A default can be specified with the @option{-mcpu=@var{cpu_type}}
switch and using the configure option @option{--with-cpu-@var{cpu_type}}. switch and using the configure option @option{--with-cpu-@var{cpu_type}}.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{ip2k-*-elf}ip2k-*-elf @heading @anchor{ip2k-*-elf}ip2k-*-elf
Ubicom IP2022 micro controller. Ubicom IP2022 micro controller.
...@@ -2525,16 +2493,14 @@ There are no standard Unix configurations. ...@@ -2525,16 +2493,14 @@ There are no standard Unix configurations.
Use @samp{configure --target=ip2k-elf --enable-languages=c} to configure GCC@. Use @samp{configure --target=ip2k-elf --enable-languages=c} to configure GCC@.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{m32r-*-elf}m32r-*-elf @heading @anchor{m32r-*-elf}m32r-*-elf
Mitsubishi M32R processor. Mitsubishi M32R processor.
This configuration is intended for embedded systems. This configuration is intended for embedded systems.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{m68000-hp-bsd}m68000-hp-bsd @heading @anchor{m68000-hp-bsd}m68000-hp-bsd
HP 9000 series 200 running BSD@. Note that the C compiler that comes HP 9000 series 200 running BSD@. Note that the C compiler that comes
...@@ -2542,24 +2508,21 @@ with this system cannot compile GCC; contact @email{law@@cygnus.com} ...@@ -2542,24 +2508,21 @@ with this system cannot compile GCC; contact @email{law@@cygnus.com}
to get binaries of GCC for bootstrapping. to get binaries of GCC for bootstrapping.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{m6811-elf}m6811-elf @heading @anchor{m6811-elf}m6811-elf
Motorola 68HC11 family micro controllers. These are used in embedded Motorola 68HC11 family micro controllers. These are used in embedded
applications. There are no standard Unix configurations. applications. There are no standard Unix configurations.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{m6812-elf}m6812-elf @heading @anchor{m6812-elf}m6812-elf
Motorola 68HC12 family micro controllers. These are used in embedded Motorola 68HC12 family micro controllers. These are used in embedded
applications. There are no standard Unix configurations. applications. There are no standard Unix configurations.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{m68k-att-sysv}m68k-att-sysv @heading @anchor{m68k-att-sysv}m68k-att-sysv
AT&T 3b1, a.k.a.@: 7300 PC@. This version of GCC cannot AT&T 3b1, a.k.a.@: 7300 PC@. This version of GCC cannot
...@@ -2569,8 +2532,7 @@ bootstrap. Binaries are available from the OSU-CIS archive, at ...@@ -2569,8 +2532,7 @@ bootstrap. Binaries are available from the OSU-CIS archive, at
@uref{ftp://archive.cis.ohio-state.edu/pub/att7300/}. @uref{ftp://archive.cis.ohio-state.edu/pub/att7300/}.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{m68k-crds-unos}m68k-crds-unos @heading @anchor{m68k-crds-unos}m68k-crds-unos
Use @samp{configure unos} for building on Unos. Use @samp{configure unos} for building on Unos.
...@@ -2609,8 +2571,7 @@ If linking @file{cc1} fails, try putting the object files into a library ...@@ -2609,8 +2571,7 @@ If linking @file{cc1} fails, try putting the object files into a library
and linking from that library. and linking from that library.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{m68k-hp-hpux}m68k-hp-hpux @heading @anchor{m68k-hp-hpux}m68k-hp-hpux
HP 9000 series 300 or 400 running HP-UX@. HP-UX version 8.0 has a bug in HP 9000 series 300 or 400 running HP-UX@. HP-UX version 8.0 has a bug in
...@@ -2668,8 +2629,7 @@ to look like: ...@@ -2668,8 +2629,7 @@ to look like:
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{m68k-ncr-*}m68k-ncr-* @heading @anchor{m68k-ncr-*}m68k-ncr-*
On the Tower models 4@var{n}0 and 6@var{n}0, by default a process is not On the Tower models 4@var{n}0 and 6@var{n}0, by default a process is not
...@@ -2685,8 +2645,7 @@ MAXUMEM = 4096 ...@@ -2685,8 +2645,7 @@ MAXUMEM = 4096
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{m68k-sun}m68k-sun @heading @anchor{m68k-sun}m68k-sun
Sun 3. We do not provide a configuration file to use the Sun FPA by Sun 3. We do not provide a configuration file to use the Sun FPA by
...@@ -2694,8 +2653,7 @@ default, because programs that establish signal handlers for floating ...@@ -2694,8 +2653,7 @@ default, because programs that establish signal handlers for floating
point traps inherently cannot work with the FPA@. point traps inherently cannot work with the FPA@.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{m68k-sun-sunos4.1.1}m68k-sun-sunos4.1.1 @heading @anchor{m68k-sun-sunos4.1.1}m68k-sun-sunos4.1.1
...@@ -2703,8 +2661,7 @@ It is reported that you may need the GNU assembler on this platform. ...@@ -2703,8 +2661,7 @@ It is reported that you may need the GNU assembler on this platform.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{mips-*-*}mips-*-* @heading @anchor{mips-*-*}mips-*-*
If on a MIPS system you get an error message saying ``does not have gp If on a MIPS system you get an error message saying ``does not have gp
...@@ -2759,8 +2716,7 @@ however, you may have success with @command{smake} on IRIX 5.2 if you do ...@@ -2759,8 +2716,7 @@ however, you may have success with @command{smake} on IRIX 5.2 if you do
not have GNU @command{make} available. not have GNU @command{make} available.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{mips-sgi-irix6}mips-sgi-irix6 @heading @anchor{mips-sgi-irix6}mips-sgi-irix6
...@@ -2859,8 +2815,7 @@ See @uref{http://freeware.sgi.com/,,http://freeware.sgi.com/} for more ...@@ -2859,8 +2815,7 @@ See @uref{http://freeware.sgi.com/,,http://freeware.sgi.com/} for more
information about using GCC on IRIX platforms. information about using GCC on IRIX platforms.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{powerpc*-*-*}powerpc-*-* @heading @anchor{powerpc*-*-*}powerpc-*-*
...@@ -2868,8 +2823,7 @@ You can specify a default version for the @option{-mcpu=@var{cpu_type}} ...@@ -2868,8 +2823,7 @@ You can specify a default version for the @option{-mcpu=@var{cpu_type}}
switch by using the configure option @option{--with-cpu-@var{cpu_type}}. switch by using the configure option @option{--with-cpu-@var{cpu_type}}.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{powerpc-*-darwin*}powerpc-*-darwin* @heading @anchor{powerpc-*-darwin*}powerpc-*-darwin*
PowerPC running Darwin (Mac OS X kernel). PowerPC running Darwin (Mac OS X kernel).
...@@ -2902,15 +2856,13 @@ number of extensions not available in a standard GCC release. These ...@@ -2902,15 +2856,13 @@ number of extensions not available in a standard GCC release. These
extensions are generally specific to Mac programming. extensions are generally specific to Mac programming.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{powerpc-*-elf}powerpc-*-elf, powerpc-*-sysv4 @heading @anchor{powerpc-*-elf}powerpc-*-elf, powerpc-*-sysv4
PowerPC system in big endian mode, running System V.4. PowerPC system in big endian mode, running System V.4.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{powerpc-*-linux-gnu*}powerpc-*-linux-gnu* @heading @anchor{powerpc-*-linux-gnu*}powerpc-*-linux-gnu*
...@@ -2919,8 +2871,7 @@ You will need ...@@ -2919,8 +2871,7 @@ You will need
or newer for a working GCC@. or newer for a working GCC@.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{powerpc-*-netbsd*}powerpc-*-netbsd* @heading @anchor{powerpc-*-netbsd*}powerpc-*-netbsd*
PowerPC system in big endian mode running NetBSD@. To build the PowerPC system in big endian mode running NetBSD@. To build the
...@@ -2928,74 +2879,64 @@ documentation you will need Texinfo version 4.1 (NetBSD 1.5.1 included ...@@ -2928,74 +2879,64 @@ documentation you will need Texinfo version 4.1 (NetBSD 1.5.1 included
Texinfo version 3.12). Texinfo version 3.12).
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{powerpc-*-eabiaix}powerpc-*-eabiaix @heading @anchor{powerpc-*-eabiaix}powerpc-*-eabiaix
Embedded PowerPC system in big endian mode with @option{-mcall-aix} selected as Embedded PowerPC system in big endian mode with @option{-mcall-aix} selected as
the default. the default.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{powerpc-*-eabisim}powerpc-*-eabisim @heading @anchor{powerpc-*-eabisim}powerpc-*-eabisim
Embedded PowerPC system in big endian mode for use in running under the Embedded PowerPC system in big endian mode for use in running under the
PSIM simulator. PSIM simulator.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{powerpc-*-eabi}powerpc-*-eabi @heading @anchor{powerpc-*-eabi}powerpc-*-eabi
Embedded PowerPC system in big endian mode. Embedded PowerPC system in big endian mode.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{powerpcle-*-elf}powerpcle-*-elf, powerpcle-*-sysv4 @heading @anchor{powerpcle-*-elf}powerpcle-*-elf, powerpcle-*-sysv4
PowerPC system in little endian mode, running System V.4. PowerPC system in little endian mode, running System V.4.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{powerpcle-*-eabisim}powerpcle-*-eabisim @heading @anchor{powerpcle-*-eabisim}powerpcle-*-eabisim
Embedded PowerPC system in little endian mode for use in running under Embedded PowerPC system in little endian mode for use in running under
the PSIM simulator. the PSIM simulator.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{powerpcle-*-eabi}powerpcle-*-eabi @heading @anchor{powerpcle-*-eabi}powerpcle-*-eabi
Embedded PowerPC system in little endian mode. Embedded PowerPC system in little endian mode.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{powerpcle-*-winnt}powerpcle-*-winnt, powerpcle-*-pe @heading @anchor{powerpcle-*-winnt}powerpcle-*-winnt, powerpcle-*-pe
PowerPC system in little endian mode running Windows NT@. PowerPC system in little endian mode running Windows NT@.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{s390-*-linux*}s390-*-linux* @heading @anchor{s390-*-linux*}s390-*-linux*
S/390 system running Linux for S/390@. S/390 system running Linux for S/390@.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{s390x-*-linux*}s390x-*-linux* @heading @anchor{s390x-*-linux*}s390x-*-linux*
zSeries system (64-bit) running Linux for zSeries@. zSeries system (64-bit) running Linux for zSeries@.
@html @html
</p> <hr />
<hr>
@end html @end html
@c Please use Solaris 2 to refer to all release of Solaris, starting @c Please use Solaris 2 to refer to all release of Solaris, starting
@c with 2.0 until 2.6, 7, and 8. Solaris 1 was a marketing name for @c with 2.0 until 2.6, 7, and 8. Solaris 1 was a marketing name for
...@@ -3048,8 +2989,7 @@ There are patches for Solaris 2.6 (105633-56 or newer for SPARC, ...@@ -3048,8 +2989,7 @@ There are patches for Solaris 2.6 (105633-56 or newer for SPARC,
108653-22 for Intel) that fix this bug. 108653-22 for Intel) that fix this bug.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{sparc-sun-solaris2*}sparc-sun-solaris2* @heading @anchor{sparc-sun-solaris2*}sparc-sun-solaris2*
...@@ -3084,8 +3024,7 @@ that supports only 32-bit binaries, one must configure with ...@@ -3084,8 +3024,7 @@ that supports only 32-bit binaries, one must configure with
64-bit target libraries. 64-bit target libraries.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{sparc-sun-solaris2.7}sparc-sun-solaris2.7 @heading @anchor{sparc-sun-solaris2.7}sparc-sun-solaris2.7
...@@ -3127,7 +3066,7 @@ the Solaris 7 Recommended Patch Cluster. ...@@ -3127,7 +3066,7 @@ the Solaris 7 Recommended Patch Cluster.
@html @html
<p> <p>
<hr> <hr />
@end html @end html
@heading @anchor{sparc-sun-sunos4*}sparc-sun-sunos4* @heading @anchor{sparc-sun-sunos4*}sparc-sun-sunos4*
...@@ -3146,8 +3085,7 @@ be due to a bug in @command{sh}. You can probably get around it by running ...@@ -3146,8 +3085,7 @@ be due to a bug in @command{sh}. You can probably get around it by running
@command{make}. @command{make}.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{sparc-unknown-linux-gnulibc1}sparc-unknown-linux-gnulibc1 @heading @anchor{sparc-unknown-linux-gnulibc1}sparc-unknown-linux-gnulibc1
...@@ -3157,8 +3095,7 @@ for this platform, too. ...@@ -3157,8 +3095,7 @@ for this platform, too.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{sparc-*-linux*}sparc-*-linux* @heading @anchor{sparc-*-linux*}sparc-*-linux*
...@@ -3168,8 +3105,7 @@ releases mishandled unaligned relocations on @code{sparc-*-*} targets. ...@@ -3168,8 +3105,7 @@ releases mishandled unaligned relocations on @code{sparc-*-*} targets.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{sparc64-*-*}sparc64-*-* @heading @anchor{sparc64-*-*}sparc64-*-*
...@@ -3180,8 +3116,7 @@ invocation with an environment that causes @command{configure} to ...@@ -3180,8 +3116,7 @@ invocation with an environment that causes @command{configure} to
recognize (via @samp{uname -a}) the system as @samp{sparc-*-*} instead. recognize (via @samp{uname -a}) the system as @samp{sparc-*-*} instead.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{sparcv9-*-solaris2*}sparcv9-*-solaris2* @heading @anchor{sparcv9-*-solaris2*}sparcv9-*-solaris2*
...@@ -3196,8 +3131,7 @@ step in order to bootstrap this target with the Sun compiler: ...@@ -3196,8 +3131,7 @@ step in order to bootstrap this target with the Sun compiler:
specifies the v9 architecture to the Sun linker and assembler. specifies the v9 architecture to the Sun linker and assembler.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{#*-*-sysv*}*-*-sysv* @heading @anchor{#*-*-sysv*}*-*-sysv*
On System V release 3, you may get this error message On System V release 3, you may get this error message
...@@ -3231,16 +3165,14 @@ On a System V release 4 system, make sure @file{/usr/bin} precedes ...@@ -3231,16 +3165,14 @@ On a System V release 4 system, make sure @file{/usr/bin} precedes
@file{/usr/ucb} uses libraries which have bugs. @file{/usr/ucb} uses libraries which have bugs.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{vax-dec-ultrix}vax-dec-ultrix @heading @anchor{vax-dec-ultrix}vax-dec-ultrix
Don't try compiling with VAX C (@code{vcc}). It produces incorrect code Don't try compiling with VAX C (@code{vcc}). It produces incorrect code
in some cases (for example, when @code{alloca} is used). in some cases (for example, when @code{alloca} is used).
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{xtensa-*-elf}xtensa-*-elf @heading @anchor{xtensa-*-elf}xtensa-*-elf
...@@ -3258,8 +3190,7 @@ downloaded files include a customized copy of this header file, ...@@ -3258,8 +3190,7 @@ downloaded files include a customized copy of this header file,
which you can use to replace the default header file. which you can use to replace the default header file.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{xtensa-*-linux*}xtensa-*-linux* @heading @anchor{xtensa-*-linux*}xtensa-*-linux*
...@@ -3271,8 +3202,7 @@ respects, this target is the same as the ...@@ -3271,8 +3202,7 @@ respects, this target is the same as the
@uref{#xtensa-*-elf,,@samp{xtensa-*-elf}} target. @uref{#xtensa-*-elf,,@samp{xtensa-*-elf}} target.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{windows}Microsoft Windows (32-bit) @heading @anchor{windows}Microsoft Windows (32-bit)
...@@ -3283,8 +3213,7 @@ Current (as of early 2001) snapshots of GCC will build under Cygwin ...@@ -3283,8 +3213,7 @@ Current (as of early 2001) snapshots of GCC will build under Cygwin
without modification. without modification.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{os2}OS/2 @heading @anchor{os2}OS/2
...@@ -3297,8 +3226,7 @@ An older copy of GCC 2.8.1 is included with the EMX tools available at ...@@ -3297,8 +3226,7 @@ An older copy of GCC 2.8.1 is included with the EMX tools available at
ftp://ftp.leo.org/pub/comp/os/os2/leo/devtools/emx+gcc/}. ftp://ftp.leo.org/pub/comp/os/os2/leo/devtools/emx+gcc/}.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{older}Older systems @heading @anchor{older}Older systems
...@@ -3344,8 +3272,7 @@ about GCC on such systems (which may no longer be applicable to ...@@ -3344,8 +3272,7 @@ about GCC on such systems (which may no longer be applicable to
current GCC) is to be found in the GCC texinfo manual. current GCC) is to be found in the GCC texinfo manual.
@html @html
</p> <hr />
<hr>
@end html @end html
@heading @anchor{elf_targets}all ELF targets (SVR4, Solaris 2, etc.) @heading @anchor{elf_targets}all ELF targets (SVR4, Solaris 2, etc.)
...@@ -3356,8 +3283,7 @@ automatically. ...@@ -3356,8 +3283,7 @@ automatically.
@html @html
</p> <hr />
<hr>
<p> <p>
@end html @end html
@ifhtml @ifhtml
...@@ -3369,8 +3295,7 @@ automatically. ...@@ -3369,8 +3295,7 @@ automatically.
@ifset oldhtml @ifset oldhtml
@include install-old.texi @include install-old.texi
@html @html
</p> <hr />
<hr>
<p> <p>
@end html @end html
@ifhtml @ifhtml
...@@ -3382,8 +3307,7 @@ automatically. ...@@ -3382,8 +3307,7 @@ automatically.
@ifset gfdlhtml @ifset gfdlhtml
@include fdl.texi @include fdl.texi
@html @html
</p> <hr />
<hr>
<p> <p>
@end html @end html
@ifhtml @ifhtml
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment