Skip to content

R
riscv-gcc-1
Commit 806bf413 by John David Anglin Committed by John David Anglin
Options

config.gcc (tm_file): Prefix pa/pa-700.h to tm_file list for PA1.0 architecture… 

config.gcc (tm_file): Prefix pa/pa-700.h to tm_file list for PA1.0 architecture and pa/pa-7100.h for...

2002-05-30  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* config.gcc (tm_file): Prefix pa/pa-700.h to tm_file list for PA1.0
	architecture and pa/pa-7100.h for PA1.1 architecture, respectively.
	* pa/pa.c (override_options): Use TARGET_SCHED_DEFAULT to select
	default scheduling model.
	* pa/pa.h (TARGET_SCHED_DEFAULT): Define if not defined to "8000".
	* pa/pa-700.h (TARGET_SCHED_DEFAULT): New file for "700" scheduling.
	* pa/pa-7100.h (TARGET_SCHED_DEFAULT): New file for "7100" scheduling.
	* doc/install.texi (hppa*-*-*): Document default scheduling.

From-SVN: r54085
parent 6d8d2bbc
Showing with 97 additions and 12 deletions
gcc/ChangeLog
2002-05-30 John David Anglin <dave@hiauly1.hia.nrc.ca>
* config.gcc (tm_file): Prefix pa/pa-700.h to tm_file list for PA1.0
architecture and pa/pa-7100.h for PA1.1 architecture, respectively.
* pa/pa.c (override_options): Use TARGET_SCHED_DEFAULT to select
default scheduling model.
* pa/pa.h (TARGET_SCHED_DEFAULT): Define if not defined to "8000".
* pa/pa-700.h (TARGET_SCHED_DEFAULT): New file for "700" scheduling.
* pa/pa-7100.h (TARGET_SCHED_DEFAULT): New file for "7100" scheduling.
* doc/install.texi (hppa*-*-*): Document default scheduling.
2002-05-30 John David Anglin <dave@hiauly1.hia.nrc.ca>
* pa.c (following_call): Check TARGET_JUMP_IN_DELAY.
2002-05-31 Jason Thorpe <thorpej@wasabisystems.com>
......
gcc/config.gcc
......@@ -2805,6 +2805,14 @@ hppa*-*-* | parisc*-*-*)
then
target_cpu_default2="MASK_GAS|MASK_JUMP_IN_DELAY"
fi
case $machine in
hppa1.0* | parisc1.0*)
tm_file="pa/pa-700.h ${tm_file}"
;;
hppa1.1* | parisc1.1*)
tm_file="pa/pa-7100.h ${tm_file}"
;;
esac
;;
mips*-*-ecoff* | mips*-*-elf*)
......
gcc/config/pa/pa-700.h 0 → 100644
/* Definitions of target machine for GNU compiler, for HPs using the
PA700 scheduling model.
Copyright (C) 2002 Free Software Foundation, Inc.
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
#ifndef TARGET_SCHED_DEFAULT
#define TARGET_SCHED_DEFAULT "700"
#endif
gcc/config/pa/pa-7100.h 0 → 100644
/* Definitions of target machine for GNU compiler, for HPs using the
PA7100 scheduling model.
Copyright (C) 2002 Free Software Foundation, Inc.
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
#ifndef TARGET_SCHED_DEFAULT
#define TARGET_SCHED_DEFAULT "7100"
#endif
gcc/config/pa/pa.c
......@@ -197,38 +197,39 @@ struct gcc_target targetm = TARGET_INITIALIZER;
void
override_options ()
{
/* Default to 8000 scheduling. */
if (pa_cpu_string && ! strcmp (pa_cpu_string, "7100"))
if (pa_cpu_string == NULL)
pa_cpu_string = TARGET_SCHED_DEFAULT;
if (! strcmp (pa_cpu_string, "8000"))
{
pa_cpu_string = "8000";
pa_cpu = PROCESSOR_8000;
}
else if (! strcmp (pa_cpu_string, "7100"))
{
pa_cpu_string = "7100";
pa_cpu = PROCESSOR_7100;
}
else if (pa_cpu_string && ! strcmp (pa_cpu_string, "700"))
else if (! strcmp (pa_cpu_string, "700"))
{
pa_cpu_string = "700";
pa_cpu = PROCESSOR_700;
}
else if (pa_cpu_string && ! strcmp (pa_cpu_string, "7100LC"))
else if (! strcmp (pa_cpu_string, "7100LC"))
{
pa_cpu_string = "7100LC";
pa_cpu = PROCESSOR_7100LC;
}
else if (pa_cpu_string && ! strcmp (pa_cpu_string, "7200"))
else if (! strcmp (pa_cpu_string, "7200"))
{
pa_cpu_string = "7200";
pa_cpu = PROCESSOR_7200;
}
else if (pa_cpu_string && ! strcmp (pa_cpu_string, "7300"))
else if (! strcmp (pa_cpu_string, "7300"))
{
pa_cpu_string = "7300";
pa_cpu = PROCESSOR_7300;
}
else if (pa_cpu_string == NULL
|| ! strcmp (pa_cpu_string, "8000"))
{
pa_cpu_string = "8000";
pa_cpu = PROCESSOR_8000;
}
else
{
warning ("unknown -mschedule= option (%s).\nValid options are 700, 7100, 7100LC, 7200, 7300, and 8000\n", pa_cpu_string);
......
gcc/config/pa/pa.h
......@@ -208,6 +208,10 @@ extern int target_flags;
#define TARGET_CPU_DEFAULT 0
#endif
#ifndef TARGET_SCHED_DEFAULT
#define TARGET_SCHED_DEFAULT "8000"
#endif
#define TARGET_OPTIONS \
{ \
{ "schedule=", &pa_cpu_string, "Specify CPU for scheduling purposes" },\
......
gcc/doc/install.texi
......@@ -1997,6 +1997,19 @@ If you wish to use pa-risc 2.0 architecture support, you must use either
the HP assembler, gas/binutils 2.11 or a recent
@uref{ftp://sources.redhat.com/pub/binutils/snapshots,,snapshot of gas}.
There are three default scheduling models for instructions. They
are PROCESSOR_700, PROCESSOR_7100 and PROCESSOR_8000. They are selected
based on the the pa-risc architecture specified for the target machine
when configuring. PROCESSOR_8000 is the default model. PROCESSOR_700
and PROCESSOR_7100 are selected by specifying either @samp{hppa1.0} or
@samp{hppa1.1}, respectively.
The PROCESSOR_8000 model is not well suited to older processors. Thus,
it is important to completely specify the machine architecture when
configuring if you want a model other than PROCESSOR_8000. The macro
TARGET_SCHED_DEFAULT can be defined in BOOT_CFLAGS if a different
default scheduling model is desired.
More specific information to @samp{hppa*-hp-hpux*} targets follows.
@html
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment