Skip to content

R
riscv-gcc-1
Commit 7193e639 by Laurent GUERBY Committed by Laurent Guerby
Options

re PR ada/5911 (Support for multilib in Ada) 

2008-09-21  Laurent Guerby  <laurent@guerby.net>

        PR ada/5911
	* gcc-interface/Makefile.in: Add multilib handling for x86_64
	and sparc.
	* system-linux-sparcv9.ads: New file.
	
2008-09-21  Laurent Guerby  <laurent@guerby.net>
            Paolo Bonzini  <bonzini@gnu.org>
	
	PR ada/5911
	* Makefile.in (all, install, mostlyclean, clean, distclean): Add
	multilib handling.
	* configure.ac: Add multilib handling.
	* configure: Regenerate.


Co-Authored-By: Paolo Bonzini <bonzini@gnu.org>

From-SVN: r140525
parent aa4652fa
Showing with 1175 additions and 102 deletions
gcc/ada/ChangeLog
2008-09-21 Laurent Guerby <laurent@guerby.net>
PR ada/5911
* gcc-interface/Makefile.in: Add multilib handling for x86_64
and sparc.
* system-linux-sparcv9.ads: New file.
2008-09-20 Eric Botcazou <ebotcazou@adacore.com>
* exp_dbug.ads: Document new convention for the XVZ variable.
gcc/ada/gcc-interface/Makefile.in
......@@ -316,6 +316,18 @@ else
osys:=$(word 3,$(targ))
endif
# Make arch match the current multilib so that the RTS selection code
# picks up the right files. For a given target this must be coherent
# with MULTILIB_DIRNAMES defined in gcc/config/target/t-*.
ifeq ($(strip $(filter-out %x86_64, $(arch))),)
ifeq ($(strip $(MULTISUBDIR)),/32)
arch:=i686
endif
endif
# ???: handle more multilib targets
# LIBGNAT_TARGET_PAIRS is a list of pairs of filenames.
# The members of each pair must be separated by a '<' and no whitespace.
# Each pair must be separated by some amount of whitespace from the following
......@@ -1467,7 +1479,7 @@ ifeq ($(strip $(filter-out powerpc% linux%,$(arch) $(osys))),)
endif
ifeq ($(strip $(filter-out sparc% linux%,$(arch) $(osys))),)
LIBGNAT_TARGET_PAIRS = \
LIBGNAT_TARGET_PAIRS_32 = \
a-intnam.ads<a-intnam-linux.ads \
s-inmaop.adb<s-inmaop-posix.adb \
s-intman.adb<s-intman-posix.adb \
......@@ -1482,6 +1494,27 @@ ifeq ($(strip $(filter-out sparc% linux%,$(arch) $(osys))),)
s-tpopsp.adb<s-tpopsp-posix-foreign.adb \
system.ads<system-linux-sparc.ads
LIBGNAT_TARGET_PAIRS_64 = \
a-intnam.ads<a-intnam-linux.ads \
s-inmaop.adb<s-inmaop-posix.adb \
s-intman.adb<s-intman-posix.adb \
s-linux.ads<s-linux.ads \
s-osinte.adb<s-osinte-posix.adb \
s-osinte.ads<s-osinte-linux.ads \
s-osprim.adb<s-osprim-posix.adb \
s-taprop.adb<s-taprop-linux.adb \
s-tasinf.ads<s-tasinf-linux.ads \
s-tasinf.adb<s-tasinf-linux.adb \
s-taspri.ads<s-taspri-posix-noaltstack.ads \
s-tpopsp.adb<s-tpopsp-posix-foreign.adb \
system.ads<system-linux-sparcv9.ads
ifeq ($(strip $(MULTISUBDIR)),/64)
LIBGNAT_TARGET_PAIRS = $(LIBGNAT_TARGET_PAIRS_64)
else
LIBGNAT_TARGET_PAIRS = $(LIBGNAT_TARGET_PAIRS_32)
endif
TOOLS_TARGET_PAIRS = \
mlib-tgt-specific.adb<mlib-tgt-specific-linux.adb \
indepsw.adb<indepsw-gnu.adb
......
libada/ChangeLog
2008-09-21 Laurent Guerby <laurent@guerby.net>
Paolo Bonzini <bonzini@gnu.org>
PR ada/5911
* Makefile.in (all, install, mostlyclean, clean, distclean): Add
multilib handling.
* configure.ac: Add multilib handling.
* configure: Regenerate.
2008-08-29 Laurent Guerby <laurent@guerby.net>
* Makefile.in (FLAGS_TO_PASS): renamed to LIBADA_FLAGS_TO_PASS to
......
libada/Makefile.in
......@@ -17,6 +17,17 @@
# Default target; must be first.
all: gnatlib
$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
.PHONY: all install
## Multilib support variables.
MULTISRCTOP =
MULTIBUILDTOP =
MULTIDIRS =
MULTISUBDIR =
MULTIDO = true
MULTICLEAN = true
# Standard autoconf-set variables.
SHELL = @SHELL@
......@@ -48,12 +59,12 @@ GNATLIBCFLAGS= -g -O2
# Get target-specific overrides for TARGET_LIBGCC2_CFLAGS.
host_subdir = @host_subdir@
GCC_DIR=../../$(host_subdir)/gcc
GCC_DIR=$(MULTIBUILDTOP)../../$(host_subdir)/gcc
include $(GCC_DIR)/libgcc.mvars
target_noncanonical:=@target_noncanonical@
version := $(shell cat $(srcdir)/../gcc/BASE-VER)
libsubdir := $(libdir)/gcc/$(target_noncanonical)/$(version)
libsubdir := $(libdir)/gcc/$(target_noncanonical)/$(version)$(MULTISUBDIR)
# exeext should not be used because it's the *host* exeext. We're building
# a *target* library, aren't we?!? Likewise for CC. Still, provide bogus
......@@ -64,11 +75,12 @@ LIBADA_FLAGS_TO_PASS = \
"LDFLAGS=$(LDFLAGS)" \
"LN_S=$(LN_S)" \
"SHELL=$(SHELL)" \
"GNATLIBFLAGS=$(GNATLIBFLAGS)" \
"GNATLIBCFLAGS=$(GNATLIBCFLAGS)" \
"GNATLIBFLAGS=$(GNATLIBFLAGS) $(MULTIFLAGS)" \
"GNATLIBCFLAGS=$(GNATLIBCFLAGS) $(MULTIFLAGS)" \
"TARGET_LIBGCC2_CFLAGS=$(TARGET_LIBGCC2_CFLAGS)" \
"THREAD_KIND=$(THREAD_KIND)" \
"TRACE=$(TRACE)" \
"MULTISUBDIR=$(MULTISUBDIR)" \
"libsubdir=$(libsubdir)" \
"objext=$(objext)" \
"prefix=$(prefix)" \
......@@ -119,7 +131,8 @@ html:
TAGS:
# Installation rules.
install:
install: install-gnatlib
$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
install-info:
......@@ -129,10 +142,13 @@ install-html:
# Cleaning rules.
mostlyclean:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
clean:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
distclean:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
$(RM) Makefile config.status config.log
maintainer-clean:
......
libada/configure
......@@ -272,7 +272,7 @@ PACKAGE_STRING=
PACKAGE_BUGREPORT=
ac_unique_file="Makefile.in"
ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os target_noncanonical build_libsubdir build_subdir host_subdir target_subdir MAINT enable_shared LN_S default_gnatlib_target CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT warn_cflags LIBOBJS LTLIBOBJS'
ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os target_noncanonical build_libsubdir build_subdir host_subdir target_subdir MAINT multi_basedir toolexecdir toolexeclibdir CC ac_ct_CC EXEEXT OBJEXT CFLAGS enable_shared LN_S default_gnatlib_target LDFLAGS CPPFLAGS warn_cflags LIBOBJS LTLIBOBJS'
ac_subst_files=''
ac_pwd=`pwd`
......@@ -808,6 +808,7 @@ Optional Features:
--enable-maintainer-mode
enable make rules and dependencies not useful (and
sometimes confusing) to the casual installer
--enable-multilib build many library versions (default)
--disable-shared don't provide a shared libgnat
Optional Packages:
......@@ -1456,51 +1457,78 @@ else
MAINT='#'
fi;
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
case $enable_shared in
yes | no) ;;
*)
enable_shared=no
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
case $pkg in
ada | libada)
enable_shared=yes ;;
esac
done
IFS="$ac_save_ifs"
;;
esac
target_alias=${target_alias-$host_alias}
# Default to --enable-multilib
# Check whether --enable-multilib or --disable-multilib was given.
if test "${enable_multilib+set}" = set; then
enableval="$enable_multilib"
case "$enableval" in
yes) multilib=yes ;;
no) multilib=no ;;
*) { { echo "$as_me:$LINENO: error: bad value $enableval for multilib option" >&5
echo "$as_me: error: bad value $enableval for multilib option" >&2;}
{ (exit 1); exit 1; }; } ;;
esac
else
enable_shared=yes
multilib=yes
fi;
# We may get other options which we leave undocumented:
# --with-target-subdir, --with-multisrctop, --with-multisubdir
# See config-ml.in if you want the gory details.
# Need to pass this down for now :-P
echo "$as_me:$LINENO: checking whether ln -s works" >&5
echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
LN_S=$as_ln_s
if test "$LN_S" = "ln -s"; then
echo "$as_me:$LINENO: result: yes" >&5
echo "${ECHO_T}yes" >&6
if test "$srcdir" = "."; then
if test "$with_target_subdir" != "."; then
multi_basedir="$srcdir/$with_multisrctop../.."
else
multi_basedir="$srcdir/$with_multisrctop.."
fi
else
echo "$as_me:$LINENO: result: no, using $LN_S" >&5
echo "${ECHO_T}no, using $LN_S" >&6
multi_basedir="$srcdir/.."
fi
# Determine what to build for 'gnatlib'
if test $build = $target \
&& test ${enable_shared} = yes ; then
# Note that build=target is almost certainly the wrong test; FIXME
default_gnatlib_target="gnatlib-shared"
else
default_gnatlib_target="gnatlib-plain"
fi
ac_config_commands="$ac_config_commands default-1"
# Calculate toolexeclibdir
# Also toolexecdir, though it's only used in toolexeclibdir
case ${enable_version_specific_runtime_libs} in
yes)
# Need the gcc compiler version to know where to install libraries
# and header files if --enable-version-specific-runtime-libs option
# is selected.
toolexecdir='$(libdir)/gcc/$(target_alias)'
toolexeclibdir='$(toolexecdir)/$(gcc_version)$(MULTISUBDIR)'
;;
no)
if test -n "$with_cross_host" &&
test x"$with_cross_host" != x"no"; then
# Install a library built with a cross compiler in tooldir, not libdir.
toolexecdir='$(exec_prefix)/$(target_alias)'
toolexeclibdir='$(toolexecdir)/lib'
else
toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
toolexeclibdir='$(libdir)'
fi
multi_os_directory=`$CC -print-multi-os-directory`
case $multi_os_directory in
.) ;; # Avoid trailing /.
*) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
esac
;;
esac
#TODO: toolexeclibdir is currently disregarded
# Check the compiler.
# The same as in boehm-gc and libstdc++. Have to borrow it from there.
# We must force CC to /not/ be precious variables; otherwise
# the wrong, non-multilib-adjusted value will be used in multilibs.
# As a side effect, we have to subst CFLAGS ourselves.
ac_ext=c
......@@ -1981,74 +2009,856 @@ for ac_file in conftest.exe conftest conftest.*; do
esac
done
else
{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }; }
{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }; }
fi
rm -f conftest$ac_cv_exeext
echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
echo "${ECHO_T}$ac_cv_exeext" >&6
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
echo "$as_me:$LINENO: checking for suffix of object files" >&5
echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
if test "${ac_cv_objext+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.o conftest.obj
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
*) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
break;;
esac
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute suffix of object files: cannot compile
See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
echo "${ECHO_T}$ac_cv_objext" >&6
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
if test "${ac_cv_c_compiler_gnu+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
#ifndef __GNUC__
choke me
#endif
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -z "$ac_c_werror_flag"
|| test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_compiler_gnu=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_compiler_gnu=no
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu
fi
echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
GCC=`test $ac_compiler_gnu = yes && echo yes`
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
CFLAGS="-g"
echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
if test "${ac_cv_prog_cc_g+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -z "$ac_c_werror_flag"
|| test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_prog_cc_g=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_prog_cc_g=no
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
if test "$ac_test_CFLAGS" = set; then
CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
CFLAGS="-g"
fi
else
if test "$GCC" = yes; then
CFLAGS="-O2"
else
CFLAGS=
fi
fi
echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
if test "${ac_cv_prog_cc_stdc+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_cv_prog_cc_stdc=no
ac_save_CC=$CC
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <stdarg.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
static char *e (p, i)
char **p;
int i;
{
return p[i];
}
static char *f (char * (*g) (char **, int), char **p, ...)
{
char *s;
va_list v;
va_start (v,p);
s = g (p, va_arg (v,int));
va_end (v);
return s;
}
/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
function prototypes and stuff, but not '\xHH' hex character constants.
These don't provoke an error unfortunately, instead are silently treated
as 'x'. The following induces an error, until -std1 is added to get
proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
array size at least. It's necessary to write '\x00'==0 to get something
that's true only with -std1. */
int osf4_cc_array ['\x00' == 0 ? 1 : -1];
int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
int argc;
char **argv;
int
main ()
{
return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
;
return 0;
}
_ACEOF
# Don't try gcc -ansi; that turns off useful extensions and
# breaks some systems' header files.
# AIX -qlanglvl=ansi
# Ultrix and OSF/1 -std1
# HP-UX 10.20 and later -Ae
# HP-UX older versions -Aa -D_HPUX_SOURCE
# SVR4 -Xc -D__EXTENSIONS__
for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
CC="$ac_save_CC $ac_arg"
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -z "$ac_c_werror_flag"
|| test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_prog_cc_stdc=$ac_arg
break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f conftest.err conftest.$ac_objext
done
rm -f conftest.$ac_ext conftest.$ac_objext
CC=$ac_save_CC
fi
case "x$ac_cv_prog_cc_stdc" in
x|xno)
echo "$as_me:$LINENO: result: none needed" >&5
echo "${ECHO_T}none needed" >&6 ;;
*)
echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
CC="$CC $ac_cv_prog_cc_stdc" ;;
esac
# Some people use a C++ compiler to compile C. Since we use `exit',
# in C++ we need to declare it. In case someone uses the same compiler
# for both compiling C and C++ we need to have the C++ compiler decide
# the declaration of exit, since it's the most demanding environment.
cat >conftest.$ac_ext <<_ACEOF
#ifndef __cplusplus
choke me
#endif
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -z "$ac_c_werror_flag"
|| test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
for ac_declaration in \
'' \
'extern "C" void std::exit (int) throw (); using std::exit;' \
'extern "C" void std::exit (int); using std::exit;' \
'extern "C" void exit (int) throw ();' \
'extern "C" void exit (int);' \
'void exit (int);'
do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_declaration
#include <stdlib.h>
int
main ()
{
exit (42);
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -z "$ac_c_werror_flag"
|| test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
:
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
continue
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_declaration
int
main ()
{
exit (42);
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -z "$ac_c_werror_flag"
|| test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
done
rm -f conftest*
if test -n "$ac_declaration"; then
echo '#ifdef __cplusplus' >>confdefs.h
echo $ac_declaration >>confdefs.h
echo '#endif' >>confdefs.h
fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
case $enable_shared in
yes | no) ;;
*)
enable_shared=no
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
case $pkg in
ada | libada)
enable_shared=yes ;;
esac
done
IFS="$ac_save_ifs"
;;
esac
else
enable_shared=yes
fi;
# Need to pass this down for now :-P
echo "$as_me:$LINENO: checking whether ln -s works" >&5
echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
LN_S=$as_ln_s
if test "$LN_S" = "ln -s"; then
echo "$as_me:$LINENO: result: yes" >&5
echo "${ECHO_T}yes" >&6
else
echo "$as_me:$LINENO: result: no, using $LN_S" >&5
echo "${ECHO_T}no, using $LN_S" >&6
fi
# Determine what to build for 'gnatlib'
if test $build = $target \
&& test ${enable_shared} = yes ; then
# Note that build=target is almost certainly the wrong test; FIXME
default_gnatlib_target="gnatlib-shared"
else
default_gnatlib_target="gnatlib-plain"
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
echo "$as_me:$LINENO: result: $CC" >&5
echo "${ECHO_T}$CC" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="gcc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
echo "${ECHO_T}$ac_ct_CC" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
CC=$ac_ct_CC
else
CC="$ac_cv_prog_CC"
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
echo "$as_me:$LINENO: result: $CC" >&5
echo "${ECHO_T}$CC" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="cc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
echo "${ECHO_T}$ac_ct_CC" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
CC=$ac_ct_CC
else
CC="$ac_cv_prog_CC"
fi
fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
ac_prog_rejected=no
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
if test $# != 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
fi
fi
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
echo "$as_me:$LINENO: result: $CC" >&5
echo "${ECHO_T}$CC" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
for ac_prog in cl
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
echo "$as_me:$LINENO: result: $CC" >&5
echo "${ECHO_T}$CC" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
rm -f conftest$ac_cv_exeext
echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
echo "${ECHO_T}$ac_cv_exeext" >&6
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
echo "$as_me:$LINENO: checking for suffix of object files" >&5
echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
if test "${ac_cv_objext+set}" = set; then
test -n "$CC" && break
done
fi
if test -z "$CC"; then
ac_ct_CC=$CC
for ac_prog in cl
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="$ac_prog"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
int
main ()
{
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
echo "${ECHO_T}$ac_ct_CC" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
;
return 0;
}
_ACEOF
rm -f conftest.o conftest.obj
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
*) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
break;;
esac
test -n "$ac_ct_CC" && break
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
CC=$ac_ct_CC
fi
fi
test -z "$CC" && { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
{ { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute suffix of object files: cannot compile
echo "$as_me: error: no acceptable C compiler found in \$PATH
See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
echo "${ECHO_T}$ac_cv_objext" >&6
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
# Provide some information about the compiler.
echo "$as_me:$LINENO:" \
"checking for C compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
(eval $ac_compiler --version </dev/null >&5) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
(eval $ac_compiler -v </dev/null >&5) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
(eval $ac_compiler -V </dev/null >&5) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
if test "${ac_cv_c_compiler_gnu+set}" = set; then
......@@ -2896,6 +3706,9 @@ Usage: $0 [OPTIONS] [FILE]...
Configuration files:
$config_files
Configuration commands:
$config_commands
Report bugs to <bug-autoconf@gnu.org>."
_ACEOF
......@@ -2994,7 +3807,24 @@ fi
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
#
# INIT-COMMANDS section.
#
srcdir="$srcdir"
host="$host"
target="$target"
with_multisubdir="$with_multisubdir"
with_multisrctop="$with_multisrctop"
with_target_subdir="$with_target_subdir"
ac_configure_args="${multilib_arg} ${ac_configure_args}"
multi_basedir="$multi_basedir"
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
CC="$CC"
_ACEOF
......@@ -3004,6 +3834,7 @@ do
case "$ac_config_target" in
# Handling of arguments.
"Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
"default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ (exit 1); exit 1; }; };;
......@@ -3016,6 +3847,7 @@ done
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi
# Have a temporary directory for convenience. Make it in the build tree
......@@ -3105,16 +3937,19 @@ s,@build_subdir@,$build_subdir,;t t
s,@host_subdir@,$host_subdir,;t t
s,@target_subdir@,$target_subdir,;t t
s,@MAINT@,$MAINT,;t t
s,@multi_basedir@,$multi_basedir,;t t
s,@toolexecdir@,$toolexecdir,;t t
s,@toolexeclibdir@,$toolexeclibdir,;t t
s,@CC@,$CC,;t t
s,@ac_ct_CC@,$ac_ct_CC,;t t
s,@EXEEXT@,$EXEEXT,;t t
s,@OBJEXT@,$OBJEXT,;t t
s,@CFLAGS@,$CFLAGS,;t t
s,@enable_shared@,$enable_shared,;t t
s,@LN_S@,$LN_S,;t t
s,@default_gnatlib_target@,$default_gnatlib_target,;t t
s,@CC@,$CC,;t t
s,@CFLAGS@,$CFLAGS,;t t
s,@LDFLAGS@,$LDFLAGS,;t t
s,@CPPFLAGS@,$CPPFLAGS,;t t
s,@ac_ct_CC@,$ac_ct_CC,;t t
s,@EXEEXT@,$EXEEXT,;t t
s,@OBJEXT@,$OBJEXT,;t t
s,@warn_cflags@,$warn_cflags,;t t
s,@LIBOBJS@,$LIBOBJS,;t t
s,@LTLIBOBJS@,$LTLIBOBJS,;t t
......@@ -3351,6 +4186,131 @@ s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
#
# CONFIG_COMMANDS section.
#
for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_dest" : 'X\(//\)[^/]' \| \
X"$ac_dest" : 'X\(//\)$' \| \
X"$ac_dest" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$ac_dest" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
{ if $as_mkdir_p; then
mkdir -p "$ac_dir"
else
as_dir="$ac_dir"
as_dirs=
while test ! -d "$as_dir"; do
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
done
test ! -n "$as_dirs" || mkdir $as_dirs
fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
ac_builddir=.
if test "$ac_dir" != .; then
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_srcdir=.
if test -z "$ac_top_builddir"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
fi ;;
[\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir ;;
*) # Relative path.
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
case "$ac_dir" in
.) ac_abs_builddir=`pwd`;;
[\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
*) ac_abs_builddir=`pwd`/"$ac_dir";;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
case ${ac_top_builddir}. in
.) ac_abs_top_builddir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
*) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
case $ac_srcdir in
.) ac_abs_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
*) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
case $ac_top_srcdir in
.) ac_abs_top_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
*) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
esac;;
esac
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
default-1 )
# Only add multilib support code if we just rebuilt the top-level
# Makefile.
case " $CONFIG_FILES " in
*" Makefile "*)
ac_file=Makefile . ${multi_basedir}/config-ml.in
;;
esac ;;
esac
done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
......
libada/configure.ac
......@@ -49,6 +49,54 @@ AC_ARG_ENABLE([maintainer-mode],
[MAINT='#'])
AC_SUBST([MAINT])dnl
AC_CANONICAL_SYSTEM
target_alias=${target_alias-$host_alias}
AM_ENABLE_MULTILIB(, ..)
# Calculate toolexeclibdir
# Also toolexecdir, though it's only used in toolexeclibdir
case ${enable_version_specific_runtime_libs} in
yes)
# Need the gcc compiler version to know where to install libraries
# and header files if --enable-version-specific-runtime-libs option
# is selected.
toolexecdir='$(libdir)/gcc/$(target_alias)'
toolexeclibdir='$(toolexecdir)/$(gcc_version)$(MULTISUBDIR)'
;;
no)
if test -n "$with_cross_host" &&
test x"$with_cross_host" != x"no"; then
# Install a library built with a cross compiler in tooldir, not libdir.
toolexecdir='$(exec_prefix)/$(target_alias)'
toolexeclibdir='$(toolexecdir)/lib'
else
toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
toolexeclibdir='$(libdir)'
fi
multi_os_directory=`$CC -print-multi-os-directory`
case $multi_os_directory in
.) ;; # Avoid trailing /.
*) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
esac
;;
esac
AC_SUBST(toolexecdir)
AC_SUBST(toolexeclibdir)
#TODO: toolexeclibdir is currently disregarded
# Check the compiler.
# The same as in boehm-gc and libstdc++. Have to borrow it from there.
# We must force CC to /not/ be precious variables; otherwise
# the wrong, non-multilib-adjusted value will be used in multilibs.
# As a side effect, we have to subst CFLAGS ourselves.
m4_rename([_AC_ARG_VAR_PRECIOUS],[real_PRECIOUS])
m4_define([_AC_ARG_VAR_PRECIOUS],[])
AC_PROG_CC
m4_rename([real_PRECIOUS],[_AC_ARG_VAR_PRECIOUS])
AC_SUBST(CFLAGS)
AC_ARG_ENABLE([shared],
[AC_HELP_STRING([--disable-shared],
[don't provide a shared libgnat])],
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment