Skip to content

R
riscv-gcc-1
Commit 66dbcf2d by Rainer Orth Committed by Rainer Orth
Options

Disable hwcaps on libgfortran 

	libgfortran:
	* configure.ac: Call GCC_CHECK_LINKER_HWCAP.
	* Makefile.am (libgfortran_la_LDFLAGS): Add HWCAP_LDFLAGS.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* Makefile.in: Regenerate.

	config:
	* hwcaps.m4: New file.

	libitm:
	* acinclude.m4 (LIBITM_CHECK_LINKER_FEATURES): Remove.
	* aclocal.m4: Regenerate.
	* configure.ac: Call GCC_CHECK_LINKER_HWCAP instead of
	LIBITM_CHECK_LINKER_HWCAP.

From-SVN: r243552
parent fba12165
Showing with 685 additions and 601 deletions
config/ChangeLog
2016-12-12 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* hwcaps.m4: New file.
2016-12-08 Alan Modra <amodra@gmail.com>
* elf.m4: Revert 2016-06-21 change.
......
config/hwcaps.m4 0 → 100644
dnl
dnl Check if the linker used supports linker maps to clear hardware
dnl capabilities. This is only supported on Solaris at the moment.
dnl
dnl Defines:
dnl HWCAP_LDFLAGS=-mclear-hwcap if possible
dnl LD (as a side effect of testing)
dnl
AC_DEFUN([GCC_CHECK_LINKER_HWCAP], [
test -z "$HWCAP_LDFLAGS" && HWCAP_LDFLAGS=''
AC_REQUIRE([AC_PROG_LD])
ac_save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LFLAGS -mclear-hwcap"
AC_MSG_CHECKING([for -mclear-hwcap])
AC_TRY_LINK([], [return 0;], [ac_hwcap_ldflags=yes],[ac_hwcap_ldflags=no])
if test "$ac_hwcap_ldflags" = "yes"; then
HWCAP_LDFLAGS="-mclear-hwcap $HWCAP_LDFLAGS"
fi
AC_MSG_RESULT($ac_hwcap_ldflags)
LDFLAGS="$ac_save_LDFLAGS"
AC_SUBST(HWCAP_LDFLAGS)
AM_CONDITIONAL(HAVE_HWCAP, test $ac_hwcap_ldflags != no)
])
libgfortran/ChangeLog
2016-12-12 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* configure.ac: Call GCC_CHECK_LINKER_HWCAP.
* Makefile.am (libgfortran_la_LDFLAGS): Add HWCAP_LDFLAGS.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* Makefile.in: Regenerate.
2016-12-03 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/78379
......
libgfortran/Makefile.am
......@@ -38,6 +38,7 @@ toolexeclib_DATA = libgfortran.spec
libgfortran_la_LINK = $(LINK) $(libgfortran_la_LDFLAGS)
libgfortran_la_LDFLAGS = -version-info `grep -v '^\#' $(srcdir)/libtool-version` \
$(LTLDFLAGS) $(LIBQUADLIB) ../libbacktrace/libbacktrace.la \
$(HWCAP_LDFLAGS) \
-lm $(extra_ldflags_libgfortran) \
$(version_arg) -Wc,-shared-libgcc
libgfortran_la_DEPENDENCIES = $(version_dep) libgfortran.spec $(LIBQUADLIB_DEP)
......
libgfortran/Makefile.in
......@@ -127,6 +127,7 @@ DIST_COMMON = ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(srcdir)/libgfortran.spec.in $(srcdir)/../depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/hwcaps.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/lthostflags.m4 \
$(top_srcdir)/../config/multi.m4 \
......@@ -471,6 +472,7 @@ FCFLAGS = @FCFLAGS@
FGREP = @FGREP@
FPU_HOST_HEADER = @FPU_HOST_HEADER@
GREP = @GREP@
HWCAP_LDFLAGS = @HWCAP_LDFLAGS@
IEEE_FLAGS = @IEEE_FLAGS@
IEEE_SUPPORT = @IEEE_SUPPORT@
INSTALL = @INSTALL@
......@@ -599,6 +601,7 @@ toolexeclib_DATA = libgfortran.spec
libgfortran_la_LINK = $(LINK) $(libgfortran_la_LDFLAGS)
libgfortran_la_LDFLAGS = -version-info `grep -v '^\#' $(srcdir)/libtool-version` \
$(LTLDFLAGS) $(LIBQUADLIB) ../libbacktrace/libbacktrace.la \
$(HWCAP_LDFLAGS) \
-lm $(extra_ldflags_libgfortran) \
$(version_arg) -Wc,-shared-libgcc
......
libgfortran/aclocal.m4
......@@ -1024,6 +1024,7 @@ AC_SUBST([am__untar])
]) # _AM_PROG_TAR
m4_include([../config/depstand.m4])
m4_include([../config/hwcaps.m4])
m4_include([../config/lead-dot.m4])
m4_include([../config/lthostflags.m4])
m4_include([../config/multi.m4])
......
libgfortran/configure
......@@ -633,13 +633,16 @@ LN_S
NM
ac_ct_DUMPBIN
DUMPBIN
LD
FGREP
SED
LIBTOOL
RANLIB
AR
AS
HAVE_HWCAP_FALSE
HAVE_HWCAP_TRUE
HWCAP_LDFLAGS
LD
FGREP
SED
SECTION_FLAGS
LIBGFOR_MINIMAL_FALSE
LIBGFOR_MINIMAL_TRUE
......@@ -768,11 +771,11 @@ enable_maintainer_mode
enable_multilib
enable_dependency_tracking
enable_symvers
with_gnu_ld
enable_shared
enable_static
with_pic
enable_fast_install
with_gnu_ld
enable_libtool_lock
enable_largefile
enable_libquadmath_support
......@@ -1431,9 +1434,9 @@ Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-build-libsubdir=DIR Directory where to find libraries for build system
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
Some influential environment variables:
CC C compiler command
......@@ -5942,334 +5945,157 @@ fi
$as_echo "$ac_fdsections" >&6; }
# Find other programs we need.
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_AS+set}" = set; then :
# Check linker hardware capability support.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
$as_echo_n "checking for a sed that does not truncate output... " >&6; }
if test "${ac_cv_path_SED+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AS"; then
ac_cv_prog_AS="$AS" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
for ac_i in 1 2 3 4 5 6 7; do
ac_script="$ac_script$as_nl$ac_script"
done
echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
{ ac_script=; unset ac_script;}
if test -z "$SED"; then
ac_path_SED_found=false
# Loop through the user's path and test for each of PROGNAME-LIST
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AS="${ac_tool_prefix}as"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
# Check for GNU ac_path_SED and select it if it is found.
# Check for GNU $ac_path_SED
case `"$ac_path_SED" --version 2>&1` in
*GNU*)
ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
*)
ac_count=0
$as_echo_n 0123456789 >"conftest.in"
while :
do
cat "conftest.in" "conftest.in" >"conftest.tmp"
mv "conftest.tmp" "conftest.in"
cp "conftest.in" "conftest.nl"
$as_echo '' >> "conftest.nl"
"$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_SED_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_SED="$ac_path_SED"
ac_path_SED_max=$ac_count
fi
# 10*(2^10) chars as input seems more than enough
test $ac_count -gt 10 && break
done
IFS=$as_save_IFS
fi
fi
AS=$ac_cv_prog_AS
if test -n "$AS"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
$as_echo "$AS" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
esac
fi
if test -z "$ac_cv_prog_AS"; then
ac_ct_AS=$AS
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_ac_ct_AS+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_AS"; then
ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_AS="as"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
$ac_path_SED_found && break 3
done
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_AS=$ac_cv_prog_ac_ct_AS
if test -n "$ac_ct_AS"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
$as_echo "$ac_ct_AS" >&6; }
if test -z "$ac_cv_path_SED"; then
as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
fi
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
ac_cv_path_SED=$SED
fi
if test "x$ac_ct_AS" = x; then
AS=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
AS=$ac_ct_AS
fi
else
AS="$ac_cv_prog_AS"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
$as_echo "$ac_cv_path_SED" >&6; }
SED="$ac_cv_path_SED"
rm -f conftest.sed
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_AR+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AR"; then
ac_cv_prog_AR="$AR" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AR="${ac_tool_prefix}ar"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
test -z "$SED" && SED=sed
Xsed="$SED -e 1s/^X//"
fi
fi
AR=$ac_cv_prog_AR
if test -n "$AR"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
$as_echo "$AR" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_AR"; then
ac_ct_AR=$AR
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
$as_echo_n "checking for fgrep... " >&6; }
if test "${ac_cv_path_FGREP+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_AR"; then
ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
then ac_cv_path_FGREP="$GREP -F"
else
if test -z "$FGREP"; then
ac_path_FGREP_found=false
# Loop through the user's path and test for each of PROGNAME-LIST
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_prog in fgrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_AR="ar"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
# Check for GNU ac_path_FGREP and select it if it is found.
# Check for GNU $ac_path_FGREP
case `"$ac_path_FGREP" --version 2>&1` in
*GNU*)
ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
*)
ac_count=0
$as_echo_n 0123456789 >"conftest.in"
while :
do
cat "conftest.in" "conftest.in" >"conftest.tmp"
mv "conftest.tmp" "conftest.in"
cp "conftest.in" "conftest.nl"
$as_echo 'FGREP' >> "conftest.nl"
"$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_FGREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_FGREP="$ac_path_FGREP"
ac_path_FGREP_max=$ac_count
fi
# 10*(2^10) chars as input seems more than enough
test $ac_count -gt 10 && break
done
rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
esac
$ac_path_FGREP_found && break 3
done
done
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_FGREP"; then
as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_FGREP=$FGREP
fi
fi
fi
fi
ac_ct_AR=$ac_cv_prog_ac_ct_AR
if test -n "$ac_ct_AR"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
$as_echo "$ac_ct_AR" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_AR" = x; then
AR=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
AR=$ac_ct_AR
fi
else
AR="$ac_cv_prog_AR"
fi
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_RANLIB+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
RANLIB=$ac_cv_prog_RANLIB
if test -n "$RANLIB"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
$as_echo "$RANLIB" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_RANLIB"; then
ac_ct_RANLIB=$RANLIB
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_RANLIB"; then
ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_RANLIB="ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
if test -n "$ac_ct_RANLIB"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
$as_echo "$ac_ct_RANLIB" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_RANLIB" = x; then
RANLIB="ranlib-not-found-in-path-error"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
RANLIB=$ac_ct_RANLIB
fi
else
RANLIB="$ac_cv_prog_RANLIB"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
set x ${MAKE-make}
ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
$as_echo_n "(cached) " >&6
else
cat >conftest.make <<\_ACEOF
SHELL = /bin/sh
all:
@echo '@@@%%%=$(MAKE)=@@@%%%'
_ACEOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
case `${MAKE-make} -f conftest.make 2>/dev/null` in
*@@@%%%=?*=@@@%%%*)
eval ac_cv_prog_make_${ac_make}_set=yes;;
*)
eval ac_cv_prog_make_${ac_make}_set=no;;
esac
rm -f conftest.make
fi
if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
SET_MAKE=
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
# Configure libtool
#AC_MSG_NOTICE([====== Starting libtool configuration])
enable_dlopen=yes
case `pwd` in
*\ * | *\ *)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
esac
macro_version='2.2.7a'
macro_revision='1.3134'
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
$as_echo "$ac_cv_path_FGREP" >&6; }
FGREP="$ac_cv_path_FGREP"
test -z "$GREP" && GREP=grep
......@@ -6281,24 +6107,11 @@ macro_revision='1.3134'
ltmain="$ac_aux_dir/ltmain.sh"
# Backslashify metacharacters that are still active within
# double-quoted strings.
sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
# Same as above, but do not quote variable references.
double_quote_subst='s/\(["`\\]\)/\\\1/g'
# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
# Sed substitution to delay expansion of an escaped single quote.
delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
# Sed substitution to avoid accidental globbing in evaled expressions
no_glob_subst='s/\*/\\\*/g'
ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
......@@ -6352,78 +6165,110 @@ esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
$as_echo_n "checking for a sed that does not truncate output... " >&6; }
if test "${ac_cv_path_SED+set}" = set; then :
$as_echo_n "(cached) " >&6
else
ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
for ac_i in 1 2 3 4 5 6 7; do
ac_script="$ac_script$as_nl$ac_script"
done
echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
{ ac_script=; unset ac_script;}
if test -z "$SED"; then
ac_path_SED_found=false
# Loop through the user's path and test for each of PROGNAME-LIST
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
# Check for GNU ac_path_SED and select it if it is found.
# Check for GNU $ac_path_SED
case `"$ac_path_SED" --version 2>&1` in
*GNU*)
ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
*)
ac_count=0
$as_echo_n 0123456789 >"conftest.in"
while :
do
cat "conftest.in" "conftest.in" >"conftest.tmp"
mv "conftest.tmp" "conftest.in"
cp "conftest.in" "conftest.nl"
$as_echo '' >> "conftest.nl"
"$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_SED_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_SED="$ac_path_SED"
ac_path_SED_max=$ac_count
fi
# 10*(2^10) chars as input seems more than enough
test $ac_count -gt 10 && break
done
rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
esac
$ac_path_SED_found && break 3
done
done
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_SED"; then
as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
fi
else
ac_cv_path_SED=$SED
fi
# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then :
withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
else
with_gnu_ld=no
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
$as_echo "$ac_cv_path_SED" >&6; }
SED="$ac_cv_path_SED"
rm -f conftest.sed
test -z "$SED" && SED=sed
Xsed="$SED -e 1s/^X//"
ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
$as_echo_n "checking for ld used by $CC... " >&6; }
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[\\/]* | ?:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the pathname of ld
ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
$as_echo_n "checking for GNU ld... " >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
$as_echo_n "checking for non-GNU ld... " >&6; }
fi
if test "${lt_cv_path_LD+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -z "$LD"; then
lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
IFS="$lt_save_ifs"
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
test "$with_gnu_ld" != no && break
;;
*)
test "$with_gnu_ld" != yes && break
;;
esac
fi
done
IFS="$lt_save_ifs"
else
lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi
LD="$lt_cv_path_LD"
if test -n "$LD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
$as_echo "$LD" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
if test "${lt_cv_prog_gnu_ld+set}" = set; then :
$as_echo_n "(cached) " >&6
else
# I'd rather use --version here, but apparently some GNU lds only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
;;
*)
lt_cv_prog_gnu_ld=no
;;
esac
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
$as_echo "$lt_cv_prog_gnu_ld" >&6; }
with_gnu_ld=$lt_cv_prog_gnu_ld
......@@ -6434,85 +6279,381 @@ Xsed="$SED -e 1s/^X//"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
$as_echo_n "checking for fgrep... " >&6; }
if test "${ac_cv_path_FGREP+set}" = set; then :
test -z "$HWCAP_LDFLAGS" && HWCAP_LDFLAGS=''
ac_save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LFLAGS -mclear-hwcap"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -mclear-hwcap" >&5
$as_echo_n "checking for -mclear-hwcap... " >&6; }
if test x$gcc_no_link = xyes; then
as_fn_error "Link tests are not allowed after GCC_NO_EXECUTABLES." "$LINENO" 5
fi
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
ac_hwcap_ldflags=yes
else
ac_hwcap_ldflags=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
if test "$ac_hwcap_ldflags" = "yes"; then
HWCAP_LDFLAGS="-mclear-hwcap $HWCAP_LDFLAGS"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_hwcap_ldflags" >&5
$as_echo "$ac_hwcap_ldflags" >&6; }
LDFLAGS="$ac_save_LDFLAGS"
if test $ac_hwcap_ldflags != no; then
HAVE_HWCAP_TRUE=
HAVE_HWCAP_FALSE='#'
else
HAVE_HWCAP_TRUE='#'
HAVE_HWCAP_FALSE=
fi
# Find other programs we need.
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_AS+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
then ac_cv_path_FGREP="$GREP -F"
else
if test -z "$FGREP"; then
ac_path_FGREP_found=false
# Loop through the user's path and test for each of PROGNAME-LIST
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
if test -n "$AS"; then
ac_cv_prog_AS="$AS" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_prog in fgrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
# Check for GNU ac_path_FGREP and select it if it is found.
# Check for GNU $ac_path_FGREP
case `"$ac_path_FGREP" --version 2>&1` in
*GNU*)
ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
*)
ac_count=0
$as_echo_n 0123456789 >"conftest.in"
while :
do
cat "conftest.in" "conftest.in" >"conftest.tmp"
mv "conftest.tmp" "conftest.in"
cp "conftest.in" "conftest.nl"
$as_echo 'FGREP' >> "conftest.nl"
"$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_FGREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_FGREP="$ac_path_FGREP"
ac_path_FGREP_max=$ac_count
fi
# 10*(2^10) chars as input seems more than enough
test $ac_count -gt 10 && break
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AS="${ac_tool_prefix}as"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
IFS=$as_save_IFS
fi
fi
AS=$ac_cv_prog_AS
if test -n "$AS"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
$as_echo "$AS" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_AS"; then
ac_ct_AS=$AS
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_ac_ct_AS+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_AS"; then
ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_AS="as"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_AS=$ac_cv_prog_ac_ct_AS
if test -n "$ac_ct_AS"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
$as_echo "$ac_ct_AS" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_AS" = x; then
AS=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
AS=$ac_ct_AS
fi
else
AS="$ac_cv_prog_AS"
fi
$ac_path_FGREP_found && break 3
done
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_AR+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AR"; then
ac_cv_prog_AR="$AR" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AR="${ac_tool_prefix}ar"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
AR=$ac_cv_prog_AR
if test -n "$AR"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
$as_echo "$AR" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_AR"; then
ac_ct_AR=$AR
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_AR"; then
ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_AR="ar"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_AR=$ac_cv_prog_ac_ct_AR
if test -n "$ac_ct_AR"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
$as_echo "$ac_ct_AR" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_AR" = x; then
AR=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
AR=$ac_ct_AR
fi
else
AR="$ac_cv_prog_AR"
fi
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_RANLIB+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
RANLIB=$ac_cv_prog_RANLIB
if test -n "$RANLIB"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
$as_echo "$RANLIB" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_RANLIB"; then
ac_ct_RANLIB=$RANLIB
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_RANLIB"; then
ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_RANLIB="ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_FGREP"; then
as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
fi
fi
ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
if test -n "$ac_ct_RANLIB"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
$as_echo "$ac_ct_RANLIB" >&6; }
else
ac_cv_path_FGREP=$FGREP
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test "x$ac_ct_RANLIB" = x; then
RANLIB="ranlib-not-found-in-path-error"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
RANLIB=$ac_ct_RANLIB
fi
else
RANLIB="$ac_cv_prog_RANLIB"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
$as_echo "$ac_cv_path_FGREP" >&6; }
FGREP="$ac_cv_path_FGREP"
test -z "$GREP" && GREP=grep
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
set x ${MAKE-make}
ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
$as_echo_n "(cached) " >&6
else
cat >conftest.make <<\_ACEOF
SHELL = /bin/sh
all:
@echo '@@@%%%=$(MAKE)=@@@%%%'
_ACEOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
case `${MAKE-make} -f conftest.make 2>/dev/null` in
*@@@%%%=?*=@@@%%%*)
eval ac_cv_prog_make_${ac_make}_set=yes;;
*)
eval ac_cv_prog_make_${ac_make}_set=no;;
esac
rm -f conftest.make
fi
if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
SET_MAKE=
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
# Configure libtool
#AC_MSG_NOTICE([====== Starting libtool configuration])
enable_dlopen=yes
case `pwd` in
*\ * | *\ *)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
esac
macro_version='2.2.7a'
macro_revision='1.3134'
......@@ -6521,116 +6662,29 @@ test -z "$GREP" && GREP=grep
# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then :
withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
else
with_gnu_ld=no
fi
ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
$as_echo_n "checking for ld used by $CC... " >&6; }
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[\\/]* | ?:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the pathname of ld
ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
$as_echo_n "checking for GNU ld... " >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
$as_echo_n "checking for non-GNU ld... " >&6; }
fi
if test "${lt_cv_path_LD+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -z "$LD"; then
lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
IFS="$lt_save_ifs"
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
test "$with_gnu_ld" != no && break
;;
*)
test "$with_gnu_ld" != yes && break
;;
esac
fi
done
IFS="$lt_save_ifs"
else
lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi
LD="$lt_cv_path_LD"
if test -n "$LD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
$as_echo "$LD" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
if test "${lt_cv_prog_gnu_ld+set}" = set; then :
$as_echo_n "(cached) " >&6
else
# I'd rather use --version here, but apparently some GNU lds only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
;;
*)
lt_cv_prog_gnu_ld=no
;;
esac
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
$as_echo "$lt_cv_prog_gnu_ld" >&6; }
with_gnu_ld=$lt_cv_prog_gnu_ld
ltmain="$ac_aux_dir/ltmain.sh"
# Backslashify metacharacters that are still active within
# double-quoted strings.
sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
# Same as above, but do not quote variable references.
double_quote_subst='s/\(["`\\]\)/\\\1/g'
# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
# Sed substitution to delay expansion of an escaped single quote.
delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
# Sed substitution to avoid accidental globbing in evaled expressions
no_glob_subst='s/\*/\\\*/g'
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
......@@ -12363,7 +12417,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
#line 12366 "configure"
#line 12420 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -12469,7 +12523,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
#line 12472 "configure"
#line 12526 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
......@@ -26486,6 +26540,10 @@ if test -z "${LIBGFOR_MINIMAL_TRUE}" && test -z "${LIBGFOR_MINIMAL_FALSE}"; then
as_fn_error "conditional \"LIBGFOR_MINIMAL\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${HAVE_HWCAP_TRUE}" && test -z "${HAVE_HWCAP_FALSE}"; then
as_fn_error "conditional \"HAVE_HWCAP\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${LIBGFOR_BUILD_QUAD_TRUE}" && test -z "${LIBGFOR_BUILD_QUAD_FALSE}"; then
as_fn_error "conditional \"LIBGFOR_BUILD_QUAD\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
......@@ -27102,26 +27160,26 @@ AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
sed_quote_subst='$sed_quote_subst'
double_quote_subst='$double_quote_subst'
delay_variable_subst='$delay_variable_subst'
SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
......@@ -27291,12 +27349,12 @@ _LTECHO_EOF'
}
# Quote evaled strings.
for var in SHELL \
ECHO \
SED \
for var in SED \
GREP \
EGREP \
FGREP \
SHELL \
ECHO \
LD \
NM \
LN_S \
......@@ -28227,6 +28285,27 @@ available_tags="FC "
# ### BEGIN LIBTOOL CONFIG
# A sed program that does not truncate output.
SED=$lt_SED
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="\$SED -e 1s/^X//"
# A grep program that handles long lines.
GREP=$lt_GREP
# An ERE matcher.
EGREP=$lt_EGREP
# A literal string matcher.
FGREP=$lt_FGREP
# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL
# An echo program that protects backslashes.
ECHO=$lt_ECHO
# Which release of libtool.m4 was used?
macro_version=$macro_version
macro_revision=$macro_revision
......@@ -28243,12 +28322,6 @@ pic_mode=$pic_mode
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL
# An echo program that protects backslashes.
ECHO=$lt_ECHO
# The host system.
host_alias=$host_alias
host=$host
......@@ -28259,21 +28332,6 @@ build_alias=$build_alias
build=$build
build_os=$build_os
# A sed program that does not truncate output.
SED=$lt_SED
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="\$SED -e 1s/^X//"
# A grep program that handles long lines.
GREP=$lt_GREP
# An ERE matcher.
EGREP=$lt_EGREP
# A literal string matcher.
FGREP=$lt_FGREP
# A BSD- or MS-compatible name lister.
NM=$lt_NM
......
libgfortran/configure.ac
......@@ -222,6 +222,9 @@ fi
AC_MSG_RESULT($ac_fdsections)
AC_SUBST(SECTION_FLAGS)
# Check linker hardware capability support.
GCC_CHECK_LINKER_HWCAP
# Find other programs we need.
AC_CHECK_TOOL(AS, as)
AC_CHECK_TOOL(AR, ar)
......
libitm/ChangeLog
2016-12-12 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* acinclude.m4 (LIBITM_CHECK_LINKER_FEATURES): Remove.
* aclocal.m4: Regenerate.
* configure.ac: Call GCC_CHECK_LINKER_HWCAP instead of
LIBITM_CHECK_LINKER_HWCAP.
2016-11-15 Matthias Klose <doko@ubuntu.com>
* configure: Regenerate.
......
libitm/acinclude.m4
......@@ -300,36 +300,6 @@ AC_DEFUN([LIBITM_CHECK_LINKER_FEATURES], [
dnl
dnl Check if the linker used supports linker maps to clear hardware
dnl capabilities. This is only supported on Solaris at the moment.
dnl
dnl Defines:
dnl HWCAP_LDFLAGS=-mclear-hwcap if possible
dnl LD (as a side effect of testing)
dnl
AC_DEFUN([LIBITM_CHECK_LINKER_HWCAP], [
test -z "$HWCAP_LDFLAGS" && HWCAP_LDFLAGS=''
AC_REQUIRE([AC_PROG_LD])
ac_save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LFLAGS -mclear-hwcap"
AC_MSG_CHECKING([for -mclear-hwcap])
AC_TRY_LINK([], [return 0;], [ac_hwcap_ldflags=yes],[ac_hwcap_ldflags=no])
if test "$ac_hwcap_ldflags" = "yes"; then
HWCAP_LDFLAGS="-mclear-hwcap $HWCAP_LDFLAGS"
fi
AC_MSG_RESULT($ac_hwcap_ldflags)
LDFLAGS="$ac_save_LDFLAGS"
AC_SUBST(HWCAP_LDFLAGS)
AM_CONDITIONAL(HAVE_HWCAP, test $ac_hwcap_ldflags != no)
])
dnl
dnl Add version tags to symbols in shared library (or not), additionally
dnl marking other symbols as private/local (or not).
dnl
......
libitm/aclocal.m4
......@@ -1015,6 +1015,7 @@ m4_include([../config/asmcfi.m4])
m4_include([../config/depstand.m4])
m4_include([../config/enable.m4])
m4_include([../config/futex.m4])
m4_include([../config/hwcaps.m4])
m4_include([../config/lead-dot.m4])
m4_include([../config/mmap.m4])
m4_include([../config/multi.m4])
......
libitm/configure.ac
......@@ -215,7 +215,7 @@ LIBITM_CHECK_ATTRIBUTE_DLLEXPORT
LIBITM_CHECK_ATTRIBUTE_ALIAS
# Check linker hardware capability support.
LIBITM_CHECK_LINKER_HWCAP
GCC_CHECK_LINKER_HWCAP
# If defaulting to -mavx, don't clear hwcaps.
AC_CHECK_DECL([__AVX__], [HWCAP_LDFLAGS=''])
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment