Skip to content

R
riscv-gcc-1
Commit 65d6e994 by Carlos O'Donell Committed by Carlos O'Donell
Options

Makefile.def: Add install-html target. 


2006-05-24  Carlos O'Donell  <carlos@codesourcery.com>

	* Makefile.def: Add install-html target. Add datarootdir
	docdir and htmldir to flags_to_pass.
	* Makefile.tpl: Add install-html target.
	* Makefile.in: Regenerate.
	* configure.in: Add --with-datarootdir, --with-docdir, and
	--with-htmldir options. AC_SUBST datarootdir, docdir and htmldir.
	* configure: Regenerate.

From-SVN: r114048
parent 740dfbde
Showing with 230 additions and 167 deletions
ChangeLog
2006-05-24 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.def: Add install-html target. Add datarootdir
docdir and htmldir to flags_to_pass.
* Makefile.tpl: Add install-html target.
* Makefile.in: Regenerate.
* configure.in: Add --with-datarootdir, --with-docdir, and
--with-htmldir options. AC_SUBST datarootdir, docdir and htmldir.
* configure: Regenerate.
2006-05-24 Mark Shinwell <shinwell@codesourcery.com>
* configure.in: Enable gprof for cross builds.
......
Makefile.def
......@@ -154,6 +154,9 @@ recursive_targets = { make_target= TAGS;
recursive_targets = { make_target= install-info;
depend=configure;
depend=info; };
recursive_targets = { make_target= install-html;
depend=configure;
depend=html; };
recursive_targets = { make_target= installcheck;
depend=configure; };
recursive_targets = { make_target= mostlyclean; };
......@@ -171,7 +174,10 @@ flags_to_pass = { flag= bindir ; };
flags_to_pass = { flag= datadir ; };
flags_to_pass = { flag= exec_prefix ; };
flags_to_pass = { flag= includedir ; };
flags_to_pass = { flag= datarootdir ; };
flags_to_pass = { flag= docdir ; };
flags_to_pass = { flag= infodir ; };
flags_to_pass = { flag= htmldir ; };
flags_to_pass = { flag= libdir ; };
flags_to_pass = { flag= libexecdir ; };
flags_to_pass = { flag= lispdir ; };
......
Makefile.in
This source diff could not be displayed because it is too large. You can view the blob instead.
Makefile.tpl
......@@ -53,6 +53,9 @@ libdir = @libdir@
includedir = @includedir@
oldincludedir = @oldincludedir@
infodir = @infodir@
datarootdir = @datarootdir@
docdir = @docdir@
htmldir = @htmldir@
mandir = @mandir@
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
......@@ -532,7 +535,7 @@ do-[+make_target+]:
# Here are the targets which correspond to the do-X targets.
.PHONY: info installcheck dvi html install-info
.PHONY: info installcheck dvi html install-info install-html
.PHONY: clean distclean mostlyclean maintainer-clean realclean
.PHONY: local-clean local-distclean local-maintainer-clean
info: do-info
......@@ -550,6 +553,8 @@ install-info: do-install-info dir.info
$(INSTALL_DATA) dir.info $(DESTDIR)$(infodir)/dir.info ; \
else true ; fi
install-html: do-install-html
local-clean:
-rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log
......
configure
......@@ -16,6 +16,12 @@ ac_help="$ac_help
ac_help="$ac_help
--enable-libssp Builds libssp directory"
ac_help="$ac_help
--with-datarootdir Use datarootdir as the data root directory."
ac_help="$ac_help
--with-docdir Install documentation in this directory."
ac_help="$ac_help
--with-htmldir Install html in this directory."
ac_help="$ac_help
--with-mpfr-dir=PATH Specify source directory for MPFR library"
ac_help="$ac_help
--with-mpfr=PATH Specify directory for installed MPFR library"
......@@ -599,7 +605,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:603: checking host system type" >&5
echo "configure:609: checking host system type" >&5
host_alias=$host
case "$host_alias" in
......@@ -620,7 +626,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
echo "configure:624: checking target system type" >&5
echo "configure:630: checking target system type" >&5
target_alias=$target
case "$target_alias" in
......@@ -638,7 +644,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:642: checking build system type" >&5
echo "configure:648: checking build system type" >&5
build_alias=$build
case "$build_alias" in
......@@ -693,7 +699,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x,"
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:697: checking for a BSD compatible install" >&5
echo "configure:703: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -746,7 +752,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
echo "configure:750: checking whether ln works" >&5
echo "configure:756: checking whether ln works" >&5
if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -770,7 +776,7 @@ else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:774: checking whether ln -s works" >&5
echo "configure:780: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1837,7 +1843,7 @@ else
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1841: checking for $ac_word" >&5
echo "configure:1847: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1867,7 +1873,7 @@ if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1871: checking for $ac_word" >&5
echo "configure:1877: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1918,7 +1924,7 @@ fi
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1922: checking for $ac_word" >&5
echo "configure:1928: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1950,7 +1956,7 @@ fi
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1954: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
echo "configure:1960: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
......@@ -1961,12 +1967,12 @@ cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext << EOF
#line 1965 "configure"
#line 1971 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
if { (eval echo configure:1970: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:1976: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
......@@ -1992,12 +1998,12 @@ if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1996: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "configure:2002: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:2001: checking whether we are using GNU C" >&5
echo "configure:2007: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -2006,7 +2012,7 @@ else
yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2010: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2016: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
......@@ -2025,7 +2031,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:2029: checking whether ${CC-cc} accepts -g" >&5
echo "configure:2035: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -2092,7 +2098,7 @@ fi
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2096: checking for $ac_word" >&5
echo "configure:2102: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -2124,7 +2130,7 @@ if test -n "$ac_tool_prefix"; then
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2128: checking for $ac_word" >&5
echo "configure:2134: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -2157,7 +2163,7 @@ fi
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
echo "configure:2161: checking whether compiler driver understands Ada" >&5
echo "configure:2167: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -2189,7 +2195,7 @@ else
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
echo "configure:2193: checking how to compare bootstrapped objects" >&5
echo "configure:2199: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -2219,6 +2225,38 @@ do_compare="$gcc_cv_prog_cmp_skip"
# Check for html and install-html
# Check whether --with-datarootdir or --without-datarootdir was given.
if test "${with_datarootdir+set}" = set; then
withval="$with_datarootdir"
datarootdir="\${prefix}/${withval}"
else
datarootdir="\${prefix}/share"
fi
# Check whether --with-docdir or --without-docdir was given.
if test "${with_docdir+set}" = set; then
withval="$with_docdir"
docdir="\${prefix}/${withval}"
else
docdir="\${datarootdir}/doc"
fi
# Check whether --with-htmldir or --without-htmldir was given.
if test "${with_htmldir+set}" = set; then
withval="$with_htmldir"
htmldir="\${prefix}/${withval}"
else
htmldir="\${docdir}"
fi
# Check for GMP and MPFR
gmplibs=
gmpinc=
......@@ -2287,9 +2325,9 @@ saved_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
echo "configure:2291: checking for correct version of gmp.h" >&5
echo "configure:2329: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
#line 2293 "configure"
#line 2331 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
......@@ -2300,7 +2338,7 @@ choke me
; return 0; }
EOF
if { (eval echo configure:2304: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:2342: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
......@@ -2313,12 +2351,12 @@ rm -f conftest*
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
echo "configure:2317: checking for MPFR" >&5
echo "configure:2355: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
#line 2322 "configure"
#line 2360 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
......@@ -2326,7 +2364,7 @@ int main() {
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
if { (eval echo configure:2330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
if { (eval echo configure:2368: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
......@@ -3391,7 +3429,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3395: checking for $ac_word" >&5
echo "configure:3433: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3431,7 +3469,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3435: checking for $ac_word" >&5
echo "configure:3473: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3470,7 +3508,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3474: checking for $ac_word" >&5
echo "configure:3512: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3509,7 +3547,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3513: checking for $ac_word" >&5
echo "configure:3551: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3549,7 +3587,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3553: checking for $ac_word" >&5
echo "configure:3591: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3588,7 +3626,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3592: checking for $ac_word" >&5
echo "configure:3630: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3641,7 +3679,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3645: checking for $ac_word" >&5
echo "configure:3683: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3682,7 +3720,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3686: checking for $ac_word" >&5
echo "configure:3724: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3730,7 +3768,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3734: checking for $ac_word" >&5
echo "configure:3772: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3761,7 +3799,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3765: checking for $ac_word" >&5
echo "configure:3803: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3805,7 +3843,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3809: checking for $ac_word" >&5
echo "configure:3847: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3836,7 +3874,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3840: checking for $ac_word" >&5
echo "configure:3878: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3880,7 +3918,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3884: checking for $ac_word" >&5
echo "configure:3922: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3911,7 +3949,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3915: checking for $ac_word" >&5
echo "configure:3953: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3955,7 +3993,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3959: checking for $ac_word" >&5
echo "configure:3997: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3986,7 +4024,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3990: checking for $ac_word" >&5
echo "configure:4028: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4030,7 +4068,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4034: checking for $ac_word" >&5
echo "configure:4072: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4061,7 +4099,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4065: checking for $ac_word" >&5
echo "configure:4103: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4105,7 +4143,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4109: checking for $ac_word" >&5
echo "configure:4147: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4136,7 +4174,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4140: checking for $ac_word" >&5
echo "configure:4178: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4180,7 +4218,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4184: checking for $ac_word" >&5
echo "configure:4222: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4211,7 +4249,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4215: checking for $ac_word" >&5
echo "configure:4253: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4250,7 +4288,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4254: checking for $ac_word" >&5
echo "configure:4292: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4281,7 +4319,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4285: checking for $ac_word" >&5
echo "configure:4323: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4320,7 +4358,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4324: checking for $ac_word" >&5
echo "configure:4362: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4351,7 +4389,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4355: checking for $ac_word" >&5
echo "configure:4393: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4395,7 +4433,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4399: checking for $ac_word" >&5
echo "configure:4437: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4426,7 +4464,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4430: checking for $ac_word" >&5
echo "configure:4468: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4470,7 +4508,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4474: checking for $ac_word" >&5
echo "configure:4512: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4501,7 +4539,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4505: checking for $ac_word" >&5
echo "configure:4543: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4565,7 +4603,7 @@ fi
if test -n "$with_build_time_tools"; then
for ncn_progname in cc gcc; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:4569: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo "configure:4607: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_CC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
......@@ -4582,7 +4620,7 @@ if test -z "$ac_cv_prog_CC_FOR_TARGET"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4586: checking for $ac_word" >&5
echo "configure:4624: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4613,7 +4651,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4617: checking for $ac_word" >&5
echo "configure:4655: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4656,7 +4694,7 @@ fi
if test -n "$with_build_time_tools"; then
for ncn_progname in c++ g++ cxx gxx; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:4660: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo "configure:4698: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_CXX_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
......@@ -4673,7 +4711,7 @@ if test -z "$ac_cv_prog_CXX_FOR_TARGET"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4677: checking for $ac_word" >&5
echo "configure:4715: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4704,7 +4742,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4708: checking for $ac_word" >&5
echo "configure:4746: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4747,7 +4785,7 @@ fi
if test -n "$with_build_time_tools"; then
for ncn_progname in gcc; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:4751: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo "configure:4789: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
......@@ -4764,7 +4802,7 @@ if test -z "$ac_cv_prog_GCC_FOR_TARGET"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4768: checking for $ac_word" >&5
echo "configure:4806: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4795,7 +4833,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4799: checking for $ac_word" >&5
echo "configure:4837: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4833,7 +4871,7 @@ fi
if test -n "$with_build_time_tools"; then
for ncn_progname in gcj; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:4837: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo "configure:4875: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
......@@ -4850,7 +4888,7 @@ if test -z "$ac_cv_prog_GCJ_FOR_TARGET"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4854: checking for $ac_word" >&5
echo "configure:4892: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4881,7 +4919,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4885: checking for $ac_word" >&5
echo "configure:4923: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4924,7 +4962,7 @@ fi
if test -n "$with_build_time_tools"; then
for ncn_progname in gfortran; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:4928: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo "configure:4966: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_GFORTRAN_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
......@@ -4941,7 +4979,7 @@ if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4945: checking for $ac_word" >&5
echo "configure:4983: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4972,7 +5010,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4976: checking for $ac_word" >&5
echo "configure:5014: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5079,7 +5117,7 @@ rm conftest.c
if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ar in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:5083: checking for ar in $with_build_time_tools" >&5
echo "configure:5121: checking for ar in $with_build_time_tools" >&5
if test -x $with_build_time_tools/ar; then
AR_FOR_TARGET=`cd $with_build_time_tools && pwd`/ar
ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
......@@ -5097,7 +5135,7 @@ if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5101: checking for $ac_word" >&5
echo "configure:5139: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5134,7 +5172,7 @@ if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
for ncn_progname in ar; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:5138: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo "configure:5176: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_AR_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
......@@ -5151,7 +5189,7 @@ if test -z "$ac_cv_prog_AR_FOR_TARGET"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5155: checking for $ac_word" >&5
echo "configure:5193: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5182,7 +5220,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5186: checking for $ac_word" >&5
echo "configure:5224: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5232,7 +5270,7 @@ fi
if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for as in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:5236: checking for as in $with_build_time_tools" >&5
echo "configure:5274: checking for as in $with_build_time_tools" >&5
if test -x $with_build_time_tools/as; then
AS_FOR_TARGET=`cd $with_build_time_tools && pwd`/as
ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
......@@ -5250,7 +5288,7 @@ if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5254: checking for $ac_word" >&5
echo "configure:5292: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5287,7 +5325,7 @@ if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
for ncn_progname in as; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:5291: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo "configure:5329: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_AS_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
......@@ -5304,7 +5342,7 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5308: checking for $ac_word" >&5
echo "configure:5346: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5335,7 +5373,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5339: checking for $ac_word" >&5
echo "configure:5377: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5385,7 +5423,7 @@ fi
if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for dlltool in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:5389: checking for dlltool in $with_build_time_tools" >&5
echo "configure:5427: checking for dlltool in $with_build_time_tools" >&5
if test -x $with_build_time_tools/dlltool; then
DLLTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/dlltool
ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
......@@ -5403,7 +5441,7 @@ if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5407: checking for $ac_word" >&5
echo "configure:5445: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5440,7 +5478,7 @@ if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
for ncn_progname in dlltool; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:5444: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo "configure:5482: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_DLLTOOL_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
......@@ -5457,7 +5495,7 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5461: checking for $ac_word" >&5
echo "configure:5499: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5488,7 +5526,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5492: checking for $ac_word" >&5
echo "configure:5530: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5538,7 +5576,7 @@ fi
if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ld in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:5542: checking for ld in $with_build_time_tools" >&5
echo "configure:5580: checking for ld in $with_build_time_tools" >&5
if test -x $with_build_time_tools/ld; then
LD_FOR_TARGET=`cd $with_build_time_tools && pwd`/ld
ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
......@@ -5556,7 +5594,7 @@ if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5560: checking for $ac_word" >&5
echo "configure:5598: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5593,7 +5631,7 @@ if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
for ncn_progname in ld; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:5597: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo "configure:5635: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_LD_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
......@@ -5610,7 +5648,7 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5614: checking for $ac_word" >&5
echo "configure:5652: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5641,7 +5679,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5645: checking for $ac_word" >&5
echo "configure:5683: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5691,7 +5729,7 @@ fi
if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for lipo in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:5695: checking for lipo in $with_build_time_tools" >&5
echo "configure:5733: checking for lipo in $with_build_time_tools" >&5
if test -x $with_build_time_tools/lipo; then
LIPO_FOR_TARGET=`cd $with_build_time_tools && pwd`/lipo
ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
......@@ -5709,7 +5747,7 @@ if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
# Extract the first word of "lipo", so it can be a program name with args.
set dummy lipo; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5713: checking for $ac_word" >&5
echo "configure:5751: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5746,7 +5784,7 @@ if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
for ncn_progname in lipo; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:5750: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo "configure:5788: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
......@@ -5763,7 +5801,7 @@ if test -z "$ac_cv_prog_LIPO_FOR_TARGET"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5767: checking for $ac_word" >&5
echo "configure:5805: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5794,7 +5832,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5798: checking for $ac_word" >&5
echo "configure:5836: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5844,7 +5882,7 @@ fi
if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for nm in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:5848: checking for nm in $with_build_time_tools" >&5
echo "configure:5886: checking for nm in $with_build_time_tools" >&5
if test -x $with_build_time_tools/nm; then
NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/nm
ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
......@@ -5862,7 +5900,7 @@ if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5866: checking for $ac_word" >&5
echo "configure:5904: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5899,7 +5937,7 @@ if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
for ncn_progname in nm; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:5903: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo "configure:5941: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
......@@ -5916,7 +5954,7 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5920: checking for $ac_word" >&5
echo "configure:5958: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5947,7 +5985,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5951: checking for $ac_word" >&5
echo "configure:5989: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5997,7 +6035,7 @@ fi
if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for objdump in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:6001: checking for objdump in $with_build_time_tools" >&5
echo "configure:6039: checking for objdump in $with_build_time_tools" >&5
if test -x $with_build_time_tools/objdump; then
OBJDUMP_FOR_TARGET=`cd $with_build_time_tools && pwd`/objdump
ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
......@@ -6015,7 +6053,7 @@ if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6019: checking for $ac_word" >&5
echo "configure:6057: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -6052,7 +6090,7 @@ if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
for ncn_progname in objdump; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:6056: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo "configure:6094: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_OBJDUMP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
......@@ -6069,7 +6107,7 @@ if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6073: checking for $ac_word" >&5
echo "configure:6111: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -6100,7 +6138,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6104: checking for $ac_word" >&5
echo "configure:6142: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -6150,7 +6188,7 @@ fi
if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ranlib in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:6154: checking for ranlib in $with_build_time_tools" >&5
echo "configure:6192: checking for ranlib in $with_build_time_tools" >&5
if test -x $with_build_time_tools/ranlib; then
RANLIB_FOR_TARGET=`cd $with_build_time_tools && pwd`/ranlib
ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
......@@ -6168,7 +6206,7 @@ if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6172: checking for $ac_word" >&5
echo "configure:6210: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -6205,7 +6243,7 @@ if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
for ncn_progname in ranlib; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:6209: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo "configure:6247: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_RANLIB_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
......@@ -6222,7 +6260,7 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6226: checking for $ac_word" >&5
echo "configure:6264: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -6253,7 +6291,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6257: checking for $ac_word" >&5
echo "configure:6295: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -6303,7 +6341,7 @@ fi
if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for strip in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:6307: checking for strip in $with_build_time_tools" >&5
echo "configure:6345: checking for strip in $with_build_time_tools" >&5
if test -x $with_build_time_tools/strip; then
STRIP_FOR_TARGET=`cd $with_build_time_tools && pwd`/strip
ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
......@@ -6321,7 +6359,7 @@ if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6325: checking for $ac_word" >&5
echo "configure:6363: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -6358,7 +6396,7 @@ if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
for ncn_progname in strip; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:6362: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo "configure:6400: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_STRIP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
......@@ -6375,7 +6413,7 @@ if test -z "$ac_cv_prog_STRIP_FOR_TARGET"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6379: checking for $ac_word" >&5
echo "configure:6417: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -6406,7 +6444,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6410: checking for $ac_word" >&5
echo "configure:6448: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -6456,7 +6494,7 @@ fi
if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for windres in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:6460: checking for windres in $with_build_time_tools" >&5
echo "configure:6498: checking for windres in $with_build_time_tools" >&5
if test -x $with_build_time_tools/windres; then
WINDRES_FOR_TARGET=`cd $with_build_time_tools && pwd`/windres
ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
......@@ -6474,7 +6512,7 @@ if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6478: checking for $ac_word" >&5
echo "configure:6516: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -6511,7 +6549,7 @@ if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
for ncn_progname in windres; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
echo "configure:6515: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo "configure:6553: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_WINDRES_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
......@@ -6528,7 +6566,7 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6532: checking for $ac_word" >&5
echo "configure:6570: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -6559,7 +6597,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6563: checking for $ac_word" >&5
echo "configure:6601: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -6607,7 +6645,7 @@ fi
RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
echo "configure:6611: checking where to find the target ar" >&5
echo "configure:6649: checking where to find the target ar" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -6640,7 +6678,7 @@ else
fi
fi
echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
echo "configure:6644: checking where to find the target as" >&5
echo "configure:6682: checking where to find the target as" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -6673,7 +6711,7 @@ else
fi
fi
echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
echo "configure:6677: checking where to find the target cc" >&5
echo "configure:6715: checking where to find the target cc" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -6706,7 +6744,7 @@ else
fi
fi
echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
echo "configure:6710: checking where to find the target c++" >&5
echo "configure:6748: checking where to find the target c++" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -6742,7 +6780,7 @@ else
fi
fi
echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
echo "configure:6746: checking where to find the target c++ for libstdc++" >&5
echo "configure:6784: checking where to find the target c++ for libstdc++" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -6778,7 +6816,7 @@ else
fi
fi
echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
echo "configure:6782: checking where to find the target dlltool" >&5
echo "configure:6820: checking where to find the target dlltool" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -6811,7 +6849,7 @@ else
fi
fi
echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
echo "configure:6815: checking where to find the target gcc" >&5
echo "configure:6853: checking where to find the target gcc" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -6844,7 +6882,7 @@ else
fi
fi
echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
echo "configure:6848: checking where to find the target gcj" >&5
echo "configure:6886: checking where to find the target gcj" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -6880,7 +6918,7 @@ else
fi
fi
echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
echo "configure:6884: checking where to find the target gfortran" >&5
echo "configure:6922: checking where to find the target gfortran" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -6916,7 +6954,7 @@ else
fi
fi
echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
echo "configure:6920: checking where to find the target ld" >&5
echo "configure:6958: checking where to find the target ld" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -6949,7 +6987,7 @@ else
fi
fi
echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
echo "configure:6953: checking where to find the target lipo" >&5
echo "configure:6991: checking where to find the target lipo" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -6972,7 +7010,7 @@ else
fi
fi
echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
echo "configure:6976: checking where to find the target nm" >&5
echo "configure:7014: checking where to find the target nm" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -7005,7 +7043,7 @@ else
fi
fi
echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
echo "configure:7009: checking where to find the target objdump" >&5
echo "configure:7047: checking where to find the target objdump" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -7038,7 +7076,7 @@ else
fi
fi
echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
echo "configure:7042: checking where to find the target ranlib" >&5
echo "configure:7080: checking where to find the target ranlib" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -7071,7 +7109,7 @@ else
fi
fi
echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
echo "configure:7075: checking where to find the target strip" >&5
echo "configure:7113: checking where to find the target strip" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -7104,7 +7142,7 @@ else
fi
fi
echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
echo "configure:7108: checking where to find the target windres" >&5
echo "configure:7146: checking where to find the target windres" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
......@@ -7165,7 +7203,7 @@ fi
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:7169: checking whether to enable maintainer-specific portions of Makefiles" >&5
echo "configure:7207: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
......@@ -7290,34 +7328,15 @@ trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
#
# If the first sed substitution is executed (which looks for macros that
# take arguments), then we branch to the quote section. Otherwise,
# look for a macro that doesn't take arguments.
cat >confdef2opt.sed <<\_ACEOF
t clear
: clear
s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
t quote
s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
t quote
d
: quote
s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
s,\[,\\&,g
s,\],\\&,g
s,\$,$$,g
p
_ACEOF
# We use echo to avoid assuming a particular line-breaking character.
# The extra dot is to prevent the shell from consuming trailing
# line-breaks from the sub-command output. A line-break within
# single-quotes doesn't work because, if this script is created in a
# platform that uses two characters for line-breaks (e.g., DOS), tr
# would break.
ac_LF_and_DOT=`echo; echo .`
DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
rm -f confdef2opt.sed
cat > conftest.defs <<\EOF
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
s%\[%\\&%g
s%\]%\\&%g
s%\$%$$%g
EOF
DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
rm -f conftest.defs
# Without the "./", some shells look in PATH for config.status.
......@@ -7415,6 +7434,9 @@ s%@target_subdir@%$target_subdir%g
s%@CC@%$CC%g
s%@GNATBIND@%$GNATBIND%g
s%@do_compare@%$do_compare%g
s%@datarootdir@%$datarootdir%g
s%@docdir@%$docdir%g
s%@htmldir@%$htmldir%g
s%@gmplibs@%$gmplibs%g
s%@gmpinc@%$gmpinc%g
s%@stage1_languages@%$stage1_languages%g
......
configure.in
......@@ -1068,6 +1068,26 @@ fi
ACX_PROG_GNAT
ACX_PROG_CMP_IGNORE_INITIAL
# Check for html and install-html
AC_ARG_WITH(datarootdir,
[ --with-datarootdir Use datarootdir as the data root directory.],
[datarootdir="\${prefix}/${withval}"],
[datarootdir="\${prefix}/share"])
AC_ARG_WITH(docdir,
[ --with-docdir Install documentation in this directory.],
[docdir="\${prefix}/${withval}"],
[docdir="\${datarootdir}/doc"])
AC_ARG_WITH(htmldir,
[ --with-htmldir Install html in this directory.],
[htmldir="\${prefix}/${withval}"],
[htmldir="\${docdir}"])
AC_SUBST(datarootdir)
AC_SUBST(docdir)
AC_SUBST(htmldir)
# Check for GMP and MPFR
gmplibs=
gmpinc=
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment