sysv4.h (DWARF2_FRAME_REG_OUT): Define.

	* config/rs6000/sysv4.h (DWARF2_FRAME_REG_OUT): Define.
	* dwarf2out.c (output_cfi): Map regs using DWARF2_FRAME_REG_OUT.
	* doc/tm.texi (DWARF_FRAME_REGNUM, DWARF2_FRAME_REG_OUT): Document.

From-SVN: r76235

gcc/ChangeLog

+2004-01-21  Alan Modra  <amodra@bigpond.net.au>
+
+	* config/rs6000/sysv4.h (DWARF2_FRAME_REG_OUT): Define.
+	* dwarf2out.c (output_cfi): Map regs using DWARF2_FRAME_REG_OUT.
+	* doc/tm.texi (DWARF_FRAME_REGNUM, DWARF2_FRAME_REG_OUT): Document.
+
 2004-01-20  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
 
 	* pa-protos.h (compute_frame_size): Use HOST_WIDE_INT for frame sizes.

gcc/config/rs6000/sysv4.h

@@ -744,6 +744,18 @@ extern int fixuplabelno;
 
 #define DBX_REGISTER_NUMBER(REGNO) rs6000_dbx_register_number (REGNO)
 
+/* Map register numbers held in the call frame info that gcc has
+   collected using DWARF_FRAME_REGNUM to those that should be output in
+   .debug_frame and .eh_frame.  We continue to use gcc hard reg numbers
+   for .eh_frame, but use the numbers mandated by the various ABIs for
+   .debug_frame.  rs6000_emit_prologue has translated any combination of
+   CR2, CR3, CR4 saves to a save of CR2.  The actual code emitted saves
+   the whole of CR, so we map CR2_REGNO to the DWARF reg for CR.  */
+#define DWARF2_FRAME_REG_OUT(REGNO, FOR_EH)	\
+  ((FOR_EH) ? (REGNO)				\
+   : (REGNO) == CR2_REGNO ? 64			\
+   : DBX_REGISTER_NUMBER (REGNO))
+
 #define TARGET_ENCODE_SECTION_INFO  rs6000_elf_encode_section_info
 #define TARGET_IN_SMALL_DATA_P  rs6000_elf_in_small_data_p
 #define TARGET_SECTION_TYPE_FLAGS  rs6000_elf_section_type_flags

gcc/doc/tm.texi

@@ -3289,6 +3289,26 @@ column number to use instead.
 See the PowerPC's SPE target for an example.
 @end defmac
 
+@defmac DWARF_FRAME_REGNUM (@var{regno})
+
+Define this macro if the target's representation for dwarf registers
+used in .eh_frame or .debug_frame is different from that used in other
+debug info sections.  Given a gcc hard register number, this macro
+should return the .eh_frame register number.  The default is
+@code{DBX_REGISTER_NUMBER (@var{regno})}.
+
+@end defmac
+
+@defmac DWARF2_FRAME_REG_OUT (@var{regno}, @var{for_eh})
+
+Define this macro to map register numbers held in the call frame info
+that gcc has collected using @code{DWARF_FRAME_REGNUM} to those that
+should be output in .debug_frame (@code{@var{for_eh}} is zero) and
+.eh_frame (@code{@var{for_eh}} is non-zero).  The default is to 
+return @code{@var{regno}}.
+
+@end defmac
+
 @node Elimination
 @subsection Eliminating Frame Pointer and Arg Pointer
 

gcc/dwarf2out.c

@@ -1790,11 +1790,19 @@ dw_cfi_oprnd2_desc (enum dwarf_call_frame_info cfi)
 
 #if defined (DWARF2_DEBUGGING_INFO) || defined (DWARF2_UNWIND_INFO)
 
+/* Map register numbers held in the call frame info that gcc has
+   collected using DWARF_FRAME_REGNUM to those that should be output in
+   .debug_frame and .eh_frame.  */
+#ifndef DWARF2_FRAME_REG_OUT
+#define DWARF2_FRAME_REG_OUT(REGNO, FOR_EH) (REGNO)
+#endif
+
 /* Output a Call Frame Information opcode and its operand(s).  */
 
 static void
 output_cfi (dw_cfi_ref cfi, dw_fde_ref fde, int for_eh)
 {
+  unsigned long r;
   if (cfi->dw_cfi_opc == DW_CFA_advance_loc)
     dw2_asm_output_data (1, (cfi->dw_cfi_opc
 			     | (cfi->dw_cfi_oprnd1.dw_cfi_offset & 0x3f)),
@@ -1802,17 +1810,17 @@ output_cfi (dw_cfi_ref cfi, dw_fde_ref fde, int for_eh)
 			 cfi->dw_cfi_oprnd1.dw_cfi_offset);
   else if (cfi->dw_cfi_opc == DW_CFA_offset)
     {
-      dw2_asm_output_data (1, (cfi->dw_cfi_opc
-			       | (cfi->dw_cfi_oprnd1.dw_cfi_reg_num & 0x3f)),
-			   "DW_CFA_offset, column 0x%lx",
-			   cfi->dw_cfi_oprnd1.dw_cfi_reg_num);
+      r = DWARF2_FRAME_REG_OUT (cfi->dw_cfi_oprnd1.dw_cfi_reg_num, for_eh);
+      dw2_asm_output_data (1, (cfi->dw_cfi_opc | (r & 0x3f)),
+			   "DW_CFA_offset, column 0x%lx", r);
       dw2_asm_output_data_uleb128 (cfi->dw_cfi_oprnd2.dw_cfi_offset, NULL);
     }
   else if (cfi->dw_cfi_opc == DW_CFA_restore)
-    dw2_asm_output_data (1, (cfi->dw_cfi_opc
-			     | (cfi->dw_cfi_oprnd1.dw_cfi_reg_num & 0x3f)),
-			 "DW_CFA_restore, column 0x%lx",
-			 cfi->dw_cfi_oprnd1.dw_cfi_reg_num);
+    {
+      r = DWARF2_FRAME_REG_OUT (cfi->dw_cfi_oprnd1.dw_cfi_reg_num, for_eh);
+      dw2_asm_output_data (1, (cfi->dw_cfi_opc | (r & 0x3f)),
+			   "DW_CFA_restore, column 0x%lx", r);
+    }
   else
     {
       dw2_asm_output_data (1, cfi->dw_cfi_opc,
@@ -1857,15 +1865,15 @@ output_cfi (dw_cfi_ref cfi, dw_fde_ref fde, int for_eh)
 
 	case DW_CFA_offset_extended:
 	case DW_CFA_def_cfa:
-	  dw2_asm_output_data_uleb128 (cfi->dw_cfi_oprnd1.dw_cfi_reg_num,
-				       NULL);
+	  r = DWARF2_FRAME_REG_OUT (cfi->dw_cfi_oprnd1.dw_cfi_reg_num, for_eh);
+	  dw2_asm_output_data_uleb128 (r, NULL);
 	  dw2_asm_output_data_uleb128 (cfi->dw_cfi_oprnd2.dw_cfi_offset, NULL);
 	  break;
 
 	case DW_CFA_offset_extended_sf:
 	case DW_CFA_def_cfa_sf:
-	  dw2_asm_output_data_uleb128 (cfi->dw_cfi_oprnd1.dw_cfi_reg_num,
-				       NULL);
+	  r = DWARF2_FRAME_REG_OUT (cfi->dw_cfi_oprnd1.dw_cfi_reg_num, for_eh);
+	  dw2_asm_output_data_uleb128 (r, NULL);
 	  dw2_asm_output_data_sleb128 (cfi->dw_cfi_oprnd2.dw_cfi_offset, NULL);
 	  break;
 
@@ -1873,15 +1881,15 @@ output_cfi (dw_cfi_ref cfi, dw_fde_ref fde, int for_eh)
 	case DW_CFA_undefined:
 	case DW_CFA_same_value:
 	case DW_CFA_def_cfa_register:
-	  dw2_asm_output_data_uleb128 (cfi->dw_cfi_oprnd1.dw_cfi_reg_num,
-				       NULL);
+	  r = DWARF2_FRAME_REG_OUT (cfi->dw_cfi_oprnd1.dw_cfi_reg_num, for_eh);
+	  dw2_asm_output_data_uleb128 (r, NULL);
 	  break;
 
 	case DW_CFA_register:
-	  dw2_asm_output_data_uleb128 (cfi->dw_cfi_oprnd1.dw_cfi_reg_num,
-				       NULL);
-	  dw2_asm_output_data_uleb128 (cfi->dw_cfi_oprnd2.dw_cfi_reg_num,
-				       NULL);
+	  r = DWARF2_FRAME_REG_OUT (cfi->dw_cfi_oprnd1.dw_cfi_reg_num, for_eh);
+	  dw2_asm_output_data_uleb128 (r, NULL);
+	  r = DWARF2_FRAME_REG_OUT (cfi->dw_cfi_oprnd2.dw_cfi_reg_num, for_eh);
+	  dw2_asm_output_data_uleb128 (r, NULL);
 	  break;
 
 	case DW_CFA_def_cfa_offset:
@@ -1911,7 +1919,7 @@ output_cfi (dw_cfi_ref cfi, dw_fde_ref fde, int for_eh)
     }
 }
 
-/* Output the call frame information used to used to record information
+/* Output the call frame information used to record information
    that relates to calculating the frame pointer, and records the
    location of saved registers.  */