Skip to content

R
riscv-gcc-1
Commit 2f7bf5b7 by Alexandre Oliva Committed by Alexandre Oliva
Options

acinclude.m4: Include libtool macros from the top level. 

* acinclude.m4: Include libtool macros from the top level.
* aclocal.m4, configure: Rebuilt.

From-SVN: r36287
parent 1d0f6d89
Showing with 1298 additions and 1104 deletions
boehm-gc/ChangeLog
2000-09-10 Alexandre Oliva <aoliva@redhat.com>
* acinclude.m4: Include libtool macros from the top level.
* aclocal.m4, configure: Rebuilt.
2000-09-04 Anthony Green <green@redhat.com> 2000-09-04 Anthony Green <green@redhat.com>
Fix for PR libgcj/230: Fix for PR libgcj/230:
......
boehm-gc/acinclude.m4
...@@ -155,3 +155,9 @@ AC_SUBST(BOEHM_GC_CFLAGS) ...@@ -155,3 +155,9 @@ AC_SUBST(BOEHM_GC_CFLAGS)
])) ]))
)))) ))))
sinclude(../libtool.m4)
dnl The line below arranges for aclocal not to bring a definition of
dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[AC_DEFUN([AM_PROG_LIBTOOL],[AC_SUBST(LIBTOOL)])])
boehm-gc/aclocal.m4
...@@ -168,6 +168,12 @@ AC_SUBST(BOEHM_GC_CFLAGS) ...@@ -168,6 +168,12 @@ AC_SUBST(BOEHM_GC_CFLAGS)
)))) ))))
sinclude(../libtool.m4)
dnl The line below arranges for aclocal not to bring a definition of
dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[AC_DEFUN([AM_PROG_LIBTOOL],[AC_SUBST(LIBTOOL)])])
# Do all the work for Automake. This macro actually does too much -- # Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things. # some checks are only needed if your package does certain things.
# But this isn't really a big deal. # But this isn't really a big deal.
...@@ -293,412 +299,3 @@ else ...@@ -293,412 +299,3 @@ else
$1_FALSE= $1_FALSE=
fi]) fi])
# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Save cache, so that ltconfig can load it
AC_CACHE_SAVE
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])
AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
case "$target" in
NONE) lt_target="$host" ;;
*) lt_target="$target" ;;
esac
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
[ --disable-libtool-lock avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw*)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
])
esac
])
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_SHARED, [dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_STATIC, [dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])
AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi])
])
# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
break
else
ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
])
# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case "$lt_target" in
*-*-beos* | *-*-cygwin*)
# These system don't have libm
;;
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
*)
AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library, adds --enable-ltdl-convenience to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library, and adds --enable-ltdl-install to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_CHECK_LIB(ltdl, main,
[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
[if test x"$enable_ltdl_install" = xno; then
AC_MSG_WARN([libltdl not installed, but installation disabled])
else
enable_ltdl_install=yes
fi
])
if test x"$enable_ltdl_install" = x"yes"; then
ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
else
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
LIBLTDL="-lltdl"
INCLTDL=
fi
])
dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl
boehm-gc/configure
...@@ -27,6 +27,8 @@ ac_help="$ac_help ...@@ -27,6 +27,8 @@ ac_help="$ac_help
ac_help="$ac_help ac_help="$ac_help
--disable-libtool-lock avoid locking (might break parallel builds)" --disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help ac_help="$ac_help
--with-pic try to use only PIC/non-PIC objects [default=use both]"
ac_help="$ac_help
--with-target-subdir=SUBDIR --with-target-subdir=SUBDIR
configuring with a cross compiler" configuring with a cross compiler"
ac_help="$ac_help ac_help="$ac_help
...@@ -57,7 +59,6 @@ program_suffix=NONE ...@@ -57,7 +59,6 @@ program_suffix=NONE
program_transform_name=s,x,x, program_transform_name=s,x,x,
silent= silent=
site= site=
sitefile=
srcdir= srcdir=
target=NONE target=NONE
verbose= verbose=
...@@ -172,7 +173,6 @@ Configuration: ...@@ -172,7 +173,6 @@ Configuration:
--help print this message --help print this message
--no-create do not create output files --no-create do not create output files
--quiet, --silent do not print \`checking...' messages --quiet, --silent do not print \`checking...' messages
--site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure --version print the version of autoconf that created configure
Directory and file names: Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX --prefix=PREFIX install architecture-independent files in PREFIX
...@@ -343,11 +343,6 @@ EOF ...@@ -343,11 +343,6 @@ EOF
-site=* | --site=* | --sit=*) -site=* | --site=* | --sit=*)
site="$ac_optarg" ;; site="$ac_optarg" ;;
-site-file | --site-file | --site-fil | --site-fi | --site-f)
ac_prev=sitefile ;;
-site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
sitefile="$ac_optarg" ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr) -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;; ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
...@@ -513,16 +508,12 @@ fi ...@@ -513,16 +508,12 @@ fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones. # Prefer explicitly selected file to automatically selected ones.
if test -z "$sitefile"; then if test -z "$CONFIG_SITE"; then
if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then
if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else
else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi fi
else
CONFIG_SITE="$sitefile"
fi fi
for ac_site_file in $CONFIG_SITE; do for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then if test -r "$ac_site_file"; then
...@@ -610,7 +601,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } ...@@ -610,7 +601,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi fi
echo $ac_n "checking host system type""... $ac_c" 1>&6 echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:614: checking host system type" >&5 echo "configure:605: checking host system type" >&5
host_alias=$host host_alias=$host
case "$host_alias" in case "$host_alias" in
...@@ -631,7 +622,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ...@@ -631,7 +622,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6 echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6
echo "configure:635: checking target system type" >&5 echo "configure:626: checking target system type" >&5
target_alias=$target target_alias=$target
case "$target_alias" in case "$target_alias" in
...@@ -649,7 +640,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ...@@ -649,7 +640,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6 echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:653: checking build system type" >&5 echo "configure:644: checking build system type" >&5
build_alias=$build build_alias=$build
case "$build_alias" in case "$build_alias" in
...@@ -684,7 +675,7 @@ test "$host_alias" != "$target_alias" && ...@@ -684,7 +675,7 @@ test "$host_alias" != "$target_alias" &&
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh. # ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:688: checking for a BSD compatible install" >&5 echo "configure:679: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -737,7 +728,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' ...@@ -737,7 +728,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
echo "configure:741: checking whether build environment is sane" >&5 echo "configure:732: checking whether build environment is sane" >&5
# Just in case # Just in case
sleep 1 sleep 1
echo timestamp > conftestfile echo timestamp > conftestfile
...@@ -794,7 +785,7 @@ test "$program_suffix" != NONE && ...@@ -794,7 +785,7 @@ test "$program_suffix" != NONE &&
test "$program_transform_name" = "" && program_transform_name="s,x,x," test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:798: checking whether ${MAKE-make} sets \${MAKE}" >&5 echo "configure:789: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -827,12 +818,12 @@ else ...@@ -827,12 +818,12 @@ else
fi fi
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
echo "configure:831: checking for Cygwin environment" >&5 echo "configure:822: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 836 "configure" #line 827 "configure"
#include "confdefs.h" #include "confdefs.h"
int main() { int main() {
...@@ -843,7 +834,7 @@ int main() { ...@@ -843,7 +834,7 @@ int main() {
return __CYGWIN__; return __CYGWIN__;
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:847: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:838: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
ac_cv_cygwin=yes ac_cv_cygwin=yes
else else
...@@ -860,19 +851,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6 ...@@ -860,19 +851,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6
CYGWIN= CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
echo "configure:864: checking for mingw32 environment" >&5 echo "configure:855: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 869 "configure" #line 860 "configure"
#include "confdefs.h" #include "confdefs.h"
int main() { int main() {
return __MINGW32__; return __MINGW32__;
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:876: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:867: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
ac_cv_mingw32=yes ac_cv_mingw32=yes
else else
...@@ -920,7 +911,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } ...@@ -920,7 +911,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi fi
echo $ac_n "checking host system type""... $ac_c" 1>&6 echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:924: checking host system type" >&5 echo "configure:915: checking host system type" >&5
host_alias=$host host_alias=$host
case "$host_alias" in case "$host_alias" in
...@@ -944,7 +935,7 @@ echo "$ac_t""$host" 1>&6 ...@@ -944,7 +935,7 @@ echo "$ac_t""$host" 1>&6
PACKAGE=boehm-gc PACKAGE=boehm-gc
VERSION=5.0a6 VERSION=5.1
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
{ echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
...@@ -954,7 +945,7 @@ fi ...@@ -954,7 +945,7 @@ fi
missing_dir=`cd $ac_aux_dir && pwd` missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
echo "configure:958: checking for working aclocal" >&5 echo "configure:949: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if # Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected. # an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh. # Redirect stdin to placate older versions of autoconf. Sigh.
...@@ -967,7 +958,7 @@ else ...@@ -967,7 +958,7 @@ else
fi fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
echo "configure:971: checking for working autoconf" >&5 echo "configure:962: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if # Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected. # an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh. # Redirect stdin to placate older versions of autoconf. Sigh.
...@@ -980,7 +971,7 @@ else ...@@ -980,7 +971,7 @@ else
fi fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6 echo $ac_n "checking for working automake""... $ac_c" 1>&6
echo "configure:984: checking for working automake" >&5 echo "configure:975: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if # Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected. # an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh. # Redirect stdin to placate older versions of autoconf. Sigh.
...@@ -993,7 +984,7 @@ else ...@@ -993,7 +984,7 @@ else
fi fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
echo "configure:997: checking for working autoheader" >&5 echo "configure:988: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if # Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected. # an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh. # Redirect stdin to placate older versions of autoconf. Sigh.
...@@ -1006,7 +997,7 @@ else ...@@ -1006,7 +997,7 @@ else
fi fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
echo "configure:1010: checking for working makeinfo" >&5 echo "configure:1001: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if # Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected. # an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh. # Redirect stdin to placate older versions of autoconf. Sigh.
...@@ -1032,7 +1023,7 @@ fi ...@@ -1032,7 +1023,7 @@ fi
# Extract the first word of "gcc", so it can be a program name with args. # Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2 set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1036: checking for $ac_word" >&5 echo "configure:1027: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1062,7 +1053,7 @@ if test -z "$CC"; then ...@@ -1062,7 +1053,7 @@ if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args. # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2 set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1066: checking for $ac_word" >&5 echo "configure:1057: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1111,7 +1102,7 @@ fi ...@@ -1111,7 +1102,7 @@ fi
fi fi
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1115: checking whether we are using GNU C" >&5 echo "configure:1106: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1120,7 +1111,7 @@ else ...@@ -1120,7 +1111,7 @@ else
yes; yes;
#endif #endif
EOF EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1124: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1115: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes ac_cv_prog_gcc=yes
else else
ac_cv_prog_gcc=no ac_cv_prog_gcc=no
...@@ -1135,7 +1126,7 @@ if test $ac_cv_prog_gcc = yes; then ...@@ -1135,7 +1126,7 @@ if test $ac_cv_prog_gcc = yes; then
ac_save_CFLAGS="$CFLAGS" ac_save_CFLAGS="$CFLAGS"
CFLAGS= CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1139: checking whether ${CC-cc} accepts -g" >&5 echo "configure:1130: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1172,7 +1163,7 @@ do ...@@ -1172,7 +1163,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args. # Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2 set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1176: checking for $ac_word" >&5 echo "configure:1167: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1205,7 +1196,7 @@ test -n "$CXX" || CXX="gcc" ...@@ -1205,7 +1196,7 @@ test -n "$CXX" || CXX="gcc"
test -z "$CXX" && { echo "configure: error: no acceptable c++ found in \$PATH" 1>&2; exit 1; } test -z "$CXX" && { echo "configure: error: no acceptable c++ found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
echo "configure:1209: checking whether we are using GNU C++" >&5 echo "configure:1200: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1214,7 +1205,7 @@ else ...@@ -1214,7 +1205,7 @@ else
yes; yes;
#endif #endif
EOF EOF
if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1218: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1209: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes ac_cv_prog_gxx=yes
else else
ac_cv_prog_gxx=no ac_cv_prog_gxx=no
...@@ -1229,7 +1220,7 @@ if test $ac_cv_prog_gxx = yes; then ...@@ -1229,7 +1220,7 @@ if test $ac_cv_prog_gxx = yes; then
ac_save_CXXFLAGS="$CXXFLAGS" ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS= CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
echo "configure:1233: checking whether ${CXX-g++} accepts -g" >&5 echo "configure:1224: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1262,7 +1253,7 @@ fi ...@@ -1262,7 +1253,7 @@ fi
# NEWLIB_CONFIGURE, which doesn't work because that means that it will # NEWLIB_CONFIGURE, which doesn't work because that means that it will
# be run before AC_CANONICAL_HOST. # be run before AC_CANONICAL_HOST.
echo $ac_n "checking build system type""... $ac_c" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:1266: checking build system type" >&5 echo "configure:1257: checking build system type" >&5
build_alias=$build build_alias=$build
case "$build_alias" in case "$build_alias" in
...@@ -1283,7 +1274,7 @@ echo "$ac_t""$build" 1>&6 ...@@ -1283,7 +1274,7 @@ echo "$ac_t""$build" 1>&6
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2 set dummy ${ac_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1287: checking for $ac_word" >&5 echo "configure:1278: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1315,7 +1306,7 @@ fi ...@@ -1315,7 +1306,7 @@ fi
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2 set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1319: checking for $ac_word" >&5 echo "configure:1310: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1347,7 +1338,7 @@ fi ...@@ -1347,7 +1338,7 @@ fi
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1351: checking for $ac_word" >&5 echo "configure:1342: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1379,7 +1370,7 @@ if test -n "$ac_tool_prefix"; then ...@@ -1379,7 +1370,7 @@ if test -n "$ac_tool_prefix"; then
# Extract the first word of "ranlib", so it can be a program name with args. # Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2 set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1383: checking for $ac_word" >&5 echo "configure:1374: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1424,7 +1415,7 @@ fi ...@@ -1424,7 +1415,7 @@ fi
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh. # ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:1428: checking for a BSD compatible install" >&5 echo "configure:1419: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -1478,7 +1469,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ...@@ -1478,7 +1469,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:1482: checking whether to enable maintainer-specific portions of Makefiles" >&5 echo "configure:1473: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode" enableval="$enable_maintainer_mode"
...@@ -1512,7 +1503,7 @@ if false; then ...@@ -1512,7 +1503,7 @@ if false; then
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
echo "configure:1516: checking for executable suffix" >&5 echo "configure:1507: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1522,10 +1513,10 @@ else ...@@ -1522,10 +1513,10 @@ else
rm -f conftest* rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext= ac_cv_exeext=
if { (eval echo configure:1526: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then if { (eval echo configure:1517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do for file in conftest.*; do
case $file in case $file in
*.c | *.o | *.obj | *.ilk | *.pdb) ;; *.c | *.o | *.obj) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac esac
done done
...@@ -1633,36 +1624,6 @@ else ...@@ -1633,36 +1624,6 @@ else
enable_fast_install=yes enable_fast_install=yes
fi fi
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1640: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# Check whether --with-gnu-ld or --without-gnu-ld was given. # Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then if test "${with_gnu_ld+set}" = set; then
withval="$with_gnu_ld" withval="$with_gnu_ld"
...@@ -1675,8 +1636,14 @@ ac_prog=ld ...@@ -1675,8 +1636,14 @@ ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path. # Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
echo "configure:1679: checking for ld used by GCC" >&5 echo "configure:1640: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5` case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case "$ac_prog" in case "$ac_prog" in
# Accept absolute paths. # Accept absolute paths.
[\\/]* | [A-Za-z]:[\\/]*) [\\/]* | [A-Za-z]:[\\/]*)
...@@ -1699,10 +1666,10 @@ echo "configure:1679: checking for ld used by GCC" >&5 ...@@ -1699,10 +1666,10 @@ echo "configure:1679: checking for ld used by GCC" >&5
esac esac
elif test "$with_gnu_ld" = yes; then elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
echo "configure:1703: checking for GNU ld" >&5 echo "configure:1670: checking for GNU ld" >&5
else else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
echo "configure:1706: checking for non-GNU ld" >&5 echo "configure:1673: checking for non-GNU ld" >&5
fi fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -1737,7 +1704,7 @@ else ...@@ -1737,7 +1704,7 @@ else
fi fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
echo "configure:1741: checking if the linker ($LD) is GNU ld" >&5 echo "configure:1708: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1750,10 +1717,23 @@ fi ...@@ -1750,10 +1717,23 @@ fi
fi fi
echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6 echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
with_gnu_ld=$ac_cv_prog_gnu_ld
echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
echo "configure:1725: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
lt_cv_ld_reload_flag='-r'
fi
echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
reload_flag=$lt_cv_ld_reload_flag
test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
echo "configure:1757: checking for BSD-compatible nm" >&5 echo "configure:1737: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1764,18 +1744,20 @@ else ...@@ -1764,18 +1744,20 @@ else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=. test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then tmp_nm=$ac_dir/${ac_tool_prefix}nm
if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag. # Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says: # Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored # nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then # Tru64's nm complains that /dev/null is an invalid object file
ac_cv_path_NM="$ac_dir/nm -B" if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
ac_cv_path_NM="$tmp_nm -B"
break break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p" ac_cv_path_NM="$tmp_nm -p"
break break
else else
ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but ac_cv_path_NM=${ac_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags continue # so that we can try to find one that supports BSD flags
fi fi
fi fi
...@@ -1789,7 +1771,7 @@ NM="$ac_cv_path_NM" ...@@ -1789,7 +1771,7 @@ NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6 echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:1793: checking whether ln -s works" >&5 echo "configure:1775: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1809,12 +1791,445 @@ else ...@@ -1809,12 +1791,445 @@ else
echo "$ac_t""no" 1>&6 echo "$ac_t""no" 1>&6
fi fi
echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
echo "configure:1796: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
lt_cv_file_magic_cmd='${MAGIC}'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [regex]' -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given egrep regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.
case "$host_os" in
aix4*)
lt_cv_deplibs_check_method=pass_all
;;
beos*)
lt_cv_deplibs_check_method=pass_all
;;
bsdi4*)
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
lt_cv_file_magic_cmd='/usr/bin/file -L'
lt_cv_file_magic_test_file=/shlib/libc.so
;;
cygwin* | mingw*)
lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
lt_cv_file_magic_cmd='${OBJDUMP} -f'
;;
freebsd* )
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
case "$host_cpu" in
i*86 )
# Not sure whether the presence of OpenBSD here was a mistake.
# Let's accept both of them until this is cleared up.
lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
esac
else
lt_cv_deplibs_check_method=pass_all
fi
;;
gnu*)
lt_cv_deplibs_check_method=pass_all
;;
hpux10.20*)
# TODO: Does this work for hpux-11 too?
lt_cv_deplibs_check_method='file_magic (s0-90-90-9|PA-RISC0-9.0-9) shared library'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
irix5* | irix6*)
case "$host_os" in
irix5*)
# this will be overridden with pass_all, but let us keep it just in case
lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
;;
*)
case "$LD" in
*-32|*"-32 ") libmagic=32-bit;;
*-n32|*"-n32 ") libmagic=N32;;
*-64|*"-64 ") libmagic=64-bit;;
*) libmagic=never-match;;
esac
# this will be overridden with pass_all, but let us keep it just in case
lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
;;
esac
lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
lt_cv_deplibs_check_method=pass_all
;;
# This must be Linux ELF.
linux-gnu*)
case "$host_cpu" in
alpha* | i*86 | powerpc* | sparc* | ia64* )
lt_cv_deplibs_check_method=pass_all ;;
*)
# glibc up to 2.1.1 does not perform some relocations on ARM
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
esac
lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then :
else
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
lt_cv_file_magic_cmd='/usr/bin/file -L'
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
fi
;;
osf3* | osf4* | osf5*)
# this will be overridden with pass_all, but let us keep it just in case
lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
lt_cv_file_magic_test_file=/shlib/libc.so
lt_cv_deplibs_check_method=pass_all
;;
sco3.2v5*)
lt_cv_deplibs_check_method=pass_all
;;
solaris*)
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_test_file=/lib/libc.so
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
case "$host_vendor" in
ncr)
lt_cv_deplibs_check_method=pass_all
;;
motorola)
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
;;
esac
;;
esac
fi
echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
echo $ac_n "checking for object suffix""... $ac_c" 1>&6
echo "configure:1939: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
if { (eval echo configure:1945: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
for ac_file in conftest.*; do
case $ac_file in
*.c) ;;
*) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
esac
done
else
{ echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_objext" 1>&6
OBJEXT=$ac_cv_objext
ac_objext=$ac_cv_objext
# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
# Only perform the check for file, if the check method requires it
case "$deplibs_check_method" in
file_magic*)
if test "$file_magic_cmd" = '${MAGIC}'; then
echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
echo "configure:1969: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MAGIC" in
/*)
lt_cv_path_MAGIC="$MAGIC" # Let the user override the test with a path.
;;
?:/*)
ac_cv_path_MAGIC="$MAGIC" # Let the user override the test with a dos path.
;;
*)
ac_save_MAGIC="$MAGIC"
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="/usr/bin:$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/${ac_tool_prefix}file; then
lt_cv_path_MAGIC="$ac_dir/${ac_tool_prefix}file"
if test -n "$file_magic_test_file"; then
case "$deplibs_check_method" in
"file_magic "*)
file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
MAGIC="$lt_cv_path_MAGIC"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
egrep "$file_magic_regex" > /dev/null; then
:
else
cat <<EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such. This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem. Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
EOF
fi ;;
esac
fi
break
fi
done
IFS="$ac_save_ifs"
MAGIC="$ac_save_MAGIC"
;;
esac
fi
MAGIC="$lt_cv_path_MAGIC"
if test -n "$MAGIC"; then
echo "$ac_t""$MAGIC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$lt_cv_path_MAGIC"; then
if test -n "$ac_tool_prefix"; then
echo $ac_n "checking for file""... $ac_c" 1>&6
echo "configure:2031: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MAGIC" in
/*)
lt_cv_path_MAGIC="$MAGIC" # Let the user override the test with a path.
;;
?:/*)
ac_cv_path_MAGIC="$MAGIC" # Let the user override the test with a dos path.
;;
*)
ac_save_MAGIC="$MAGIC"
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="/usr/bin:$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/file; then
lt_cv_path_MAGIC="$ac_dir/file"
if test -n "$file_magic_test_file"; then
case "$deplibs_check_method" in
"file_magic "*)
file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
MAGIC="$lt_cv_path_MAGIC"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
egrep "$file_magic_regex" > /dev/null; then
:
else
cat <<EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such. This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem. Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
EOF
fi ;;
esac
fi
break
fi
done
IFS="$ac_save_ifs"
MAGIC="$ac_save_MAGIC"
;;
esac
fi
MAGIC="$lt_cv_path_MAGIC"
if test -n "$MAGIC"; then
echo "$ac_t""$MAGIC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
else
MAGIC=:
fi
fi
case "$target" in fi
NONE) lt_target="$host" ;; ;;
*) lt_target="$target" ;;
esac esac
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2102: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$ac_cv_prog_RANLIB"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2134: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
else
RANLIB=":"
fi
fi
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2169: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$STRIP"; then
ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
STRIP="$ac_cv_prog_STRIP"
if test -n "$STRIP"; then
echo "$ac_t""$STRIP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$ac_cv_prog_STRIP"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2201: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$STRIP"; then
ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_STRIP="strip"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
fi
fi
STRIP="$ac_cv_prog_STRIP"
if test -n "$STRIP"; then
echo "$ac_t""$STRIP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
else
STRIP=":"
fi
fi
# Check for any special flags to pass to ltconfig. # Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file" libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
...@@ -1833,13 +2248,24 @@ fi ...@@ -1833,13 +2248,24 @@ fi
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Check whether --with-pic or --without-pic was given.
if test "${with_pic+set}" = set; then
withval="$with_pic"
pic_mode="$withval"
else
pic_mode=default
fi
test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
# Some flags need to be propagated to the compiler or linker for good # Some flags need to be propagated to the compiler or linker for good
# libtool support. # libtool support.
case "$lt_target" in case "$host" in
*-*-irix6*) *-*-irix6*)
# Find out which ABI we are using. # Find out which ABI we are using.
echo '#line 1842 "configure"' > conftest.$ac_ext echo '#line 2268 "configure"' > conftest.$ac_ext
if { (eval echo configure:1843: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:2269: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in case "`/usr/bin/file conftest.o`" in
*32-bit*) *32-bit*)
LD="${LD-ld} -32" LD="${LD-ld} -32"
...@@ -1860,19 +2286,27 @@ case "$lt_target" in ...@@ -1860,19 +2286,27 @@ case "$lt_target" in
SAVE_CFLAGS="$CFLAGS" SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf" CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
echo "configure:1864: checking whether the C compiler needs -belf" >&5 echo "configure:2290: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF
#line 1869 "configure" ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
#line 2303 "configure"
#include "confdefs.h" #include "confdefs.h"
int main() { int main() {
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:1876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:2310: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
lt_cv_cc_needs_belf=yes lt_cv_cc_needs_belf=yes
else else
...@@ -1882,6 +2316,13 @@ else ...@@ -1882,6 +2316,13 @@ else
lt_cv_cc_needs_belf=no lt_cv_cc_needs_belf=no
fi fi
rm -f conftest* rm -f conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
fi fi
echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
...@@ -1894,6 +2335,49 @@ echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 ...@@ -1894,6 +2335,49 @@ echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
esac esac
echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
echo "configure:2340: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross
CXXCPP="${CXX-g++} -E"
cat > conftest.$ac_ext <<EOF
#line 2353 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2358: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
CXXCPP=/lib/cpp
fi
rm -f conftest*
ac_cv_prog_CXXCPP="$CXXCPP"
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
fi
fi
CXXCPP="$ac_cv_prog_CXXCPP"
echo "$ac_t""$CXXCPP" 1>&6
# Save cache, so that ltconfig can load it # Save cache, so that ltconfig can load it
cat > confcache <<\EOF cat > confcache <<\EOF
...@@ -1945,12 +2429,14 @@ rm -f confcache ...@@ -1945,12 +2429,14 @@ rm -f confcache
# Actually configure libtool. ac_aux_dir is where install-sh is found. # Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ MAGIC="$MAGIC" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ $libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; } || { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig # Reload cache, that may have been modified by ltconfig
...@@ -1964,7 +2450,7 @@ fi ...@@ -1964,7 +2450,7 @@ fi
# This can be used to rebuild libtool when needed # This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
# Always use our own libtool. # Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool' LIBTOOL='$(SHELL) $(top_builddir)/libtool'
...@@ -1974,6 +2460,34 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool' ...@@ -1974,6 +2460,34 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
exec 5>>./config.log exec 5>>./config.log
LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
lt_save_CC="$CC"
lt_save_CFLAGS="$CFLAGS"
AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
MAGIC="$MAGIC" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
deplibs_check_method="$deplibs_check_method" \
file_magic_cmd="$file_magic_cmd" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
--build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
|| { echo "configure: error: libtool tag configuration failed" 1>&2; exit 1; }
CC="$lt_save_CC"
CFLAGS="$lt_save_CFLAGS"
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
# Check whether --with-target-subdir or --without-target-subdir was given. # Check whether --with-target-subdir or --without-target-subdir was given.
if test "${with_target_subdir+set}" = set; then if test "${with_target_subdir+set}" = set; then
withval="$with_target_subdir" withval="$with_target_subdir"
...@@ -1988,7 +2502,7 @@ fi ...@@ -1988,7 +2502,7 @@ fi
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:1992: checking whether to enable maintainer-specific portions of Makefiles" >&5 echo "configure:2506: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode" enableval="$enable_maintainer_mode"
...@@ -2017,7 +2531,7 @@ if test "x" = "y"; then ...@@ -2017,7 +2531,7 @@ if test "x" = "y"; then
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
echo "configure:2021: checking for executable suffix" >&5 echo "configure:2535: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -2027,10 +2541,10 @@ else ...@@ -2027,10 +2541,10 @@ else
rm -f conftest* rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext= ac_cv_exeext=
if { (eval echo configure:2031: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then if { (eval echo configure:2545: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do for file in conftest.*; do
case $file in case $file in
*.c | *.o | *.obj | *.ilk | *.pdb) ;; *.c | *.o | *.obj) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac esac
done done
...@@ -2050,7 +2564,7 @@ ac_exeext=$EXEEXT ...@@ -2050,7 +2564,7 @@ ac_exeext=$EXEEXT
fi fi
echo $ac_n "checking for threads package to use""... $ac_c" 1>&6 echo $ac_n "checking for threads package to use""... $ac_c" 1>&6
echo "configure:2054: checking for threads package to use" >&5 echo "configure:2568: checking for threads package to use" >&5
# Check whether --enable-threads or --disable-threads was given. # Check whether --enable-threads or --disable-threads was given.
if test "${enable_threads+set}" = set; then if test "${enable_threads+set}" = set; then
enableval="$enable_threads" enableval="$enable_threads"
...@@ -2477,7 +2991,10 @@ s%@MAINT@%$MAINT%g ...@@ -2477,7 +2991,10 @@ s%@MAINT@%$MAINT%g
s%@EXEEXT@%$EXEEXT%g s%@EXEEXT@%$EXEEXT%g
s%@BOEHM_GC_CFLAGS@%$BOEHM_GC_CFLAGS%g s%@BOEHM_GC_CFLAGS@%$BOEHM_GC_CFLAGS%g
s%@LN_S@%$LN_S%g s%@LN_S@%$LN_S%g
s%@OBJEXT@%$OBJEXT%g
s%@STRIP@%$STRIP%g
s%@LIBTOOL@%$LIBTOOL%g s%@LIBTOOL@%$LIBTOOL%g
s%@CXXCPP@%$CXXCPP%g
s%@THREADLIB@%$THREADLIB%g s%@THREADLIB@%$THREADLIB%g
s%@target_all@%$target_all%g s%@target_all@%$target_all%g
s%@INCLUDES@%$INCLUDES%g s%@INCLUDES@%$INCLUDES%g
......
libffi/ChangeLog
2000-09-10 Alexandre Oliva <aoliva@redhat.com>
* acinclude.m4: Include libtool macros from the top level.
* aclocal.m4, configure: Rebuilt.
2000-08-22 Alexandre Oliva <aoliva@redhat.com> 2000-08-22 Alexandre Oliva <aoliva@redhat.com>
* configure.in [i*86-*-freebsd*] (TARGET, TARGETDIR): Set. * configure.in [i*86-*-freebsd*] (TARGET, TARGETDIR): Set.
......
libffi/acinclude.m4 0 → 100644
sinclude(../libtool.m4)
dnl The lines below arrange for aclocal not to bring libtool.m4
dnl AC_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[
AC_DEFUN([AC_PROG_LIBTOOL],)
AC_SUBST(LIBTOOL)
])
libffi/aclocal.m4
...@@ -10,6 +10,15 @@ dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without ...@@ -10,6 +10,15 @@ dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
dnl PARTICULAR PURPOSE. dnl PARTICULAR PURPOSE.
sinclude(../libtool.m4)
dnl The lines below arrange for aclocal not to bring libtool.m4
dnl AC_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[
AC_DEFUN([AC_PROG_LIBTOOL],)
AC_SUBST(LIBTOOL)
])
# Like AC_CONFIG_HEADER, but automatically create stamp file. # Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER, AC_DEFUN(AM_CONFIG_HEADER,
...@@ -158,412 +167,3 @@ else ...@@ -158,412 +167,3 @@ else
$1_FALSE= $1_FALSE=
fi]) fi])
# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Save cache, so that ltconfig can load it
AC_CACHE_SAVE
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])
AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
case "$target" in
NONE) lt_target="$host" ;;
*) lt_target="$target" ;;
esac
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
[ --disable-libtool-lock avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw*)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
])
esac
])
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_SHARED, [dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_STATIC, [dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])
AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi])
])
# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
break
else
ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
])
# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case "$lt_target" in
*-*-beos* | *-*-cygwin*)
# These system don't have libm
;;
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
*)
AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library, adds --enable-ltdl-convenience to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library, and adds --enable-ltdl-install to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_CHECK_LIB(ltdl, main,
[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
[if test x"$enable_ltdl_install" = xno; then
AC_MSG_WARN([libltdl not installed, but installation disabled])
else
enable_ltdl_install=yes
fi
])
if test x"$enable_ltdl_install" = x"yes"; then
ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
else
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
LIBLTDL="-lltdl"
INCLTDL=
fi
])
dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl
libffi/configure
...@@ -27,6 +27,8 @@ ac_help="$ac_help ...@@ -27,6 +27,8 @@ ac_help="$ac_help
ac_help="$ac_help ac_help="$ac_help
--disable-libtool-lock avoid locking (might break parallel builds)" --disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help ac_help="$ac_help
--with-pic try to use only PIC/non-PIC objects [default=use both]"
ac_help="$ac_help
--enable-debug debugging mode" --enable-debug debugging mode"
ac_help="$ac_help ac_help="$ac_help
--disable-structs omit code for struct support" --disable-structs omit code for struct support"
...@@ -51,7 +53,6 @@ program_suffix=NONE ...@@ -51,7 +53,6 @@ program_suffix=NONE
program_transform_name=s,x,x, program_transform_name=s,x,x,
silent= silent=
site= site=
sitefile=
srcdir= srcdir=
target=NONE target=NONE
verbose= verbose=
...@@ -166,7 +167,6 @@ Configuration: ...@@ -166,7 +167,6 @@ Configuration:
--help print this message --help print this message
--no-create do not create output files --no-create do not create output files
--quiet, --silent do not print \`checking...' messages --quiet, --silent do not print \`checking...' messages
--site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure --version print the version of autoconf that created configure
Directory and file names: Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX --prefix=PREFIX install architecture-independent files in PREFIX
...@@ -337,11 +337,6 @@ EOF ...@@ -337,11 +337,6 @@ EOF
-site=* | --site=* | --sit=*) -site=* | --site=* | --sit=*)
site="$ac_optarg" ;; site="$ac_optarg" ;;
-site-file | --site-file | --site-fil | --site-fi | --site-f)
ac_prev=sitefile ;;
-site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
sitefile="$ac_optarg" ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr) -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;; ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
...@@ -507,16 +502,12 @@ fi ...@@ -507,16 +502,12 @@ fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones. # Prefer explicitly selected file to automatically selected ones.
if test -z "$sitefile"; then if test -z "$CONFIG_SITE"; then
if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then
if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else
else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi fi
else
CONFIG_SITE="$sitefile"
fi fi
for ac_site_file in $CONFIG_SITE; do for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then if test -r "$ac_site_file"; then
...@@ -616,7 +607,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } ...@@ -616,7 +607,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi fi
echo $ac_n "checking host system type""... $ac_c" 1>&6 echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:620: checking host system type" >&5 echo "configure:611: checking host system type" >&5
host_alias=$host host_alias=$host
case "$host_alias" in case "$host_alias" in
...@@ -649,7 +640,7 @@ echo "$ac_t""$host" 1>&6 ...@@ -649,7 +640,7 @@ echo "$ac_t""$host" 1>&6
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh. # ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:653: checking for a BSD compatible install" >&5 echo "configure:644: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -702,7 +693,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' ...@@ -702,7 +693,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
echo "configure:706: checking whether build environment is sane" >&5 echo "configure:697: checking whether build environment is sane" >&5
# Just in case # Just in case
sleep 1 sleep 1
echo timestamp > conftestfile echo timestamp > conftestfile
...@@ -759,7 +750,7 @@ test "$program_suffix" != NONE && ...@@ -759,7 +750,7 @@ test "$program_suffix" != NONE &&
test "$program_transform_name" = "" && program_transform_name="s,x,x," test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:763: checking whether ${MAKE-make} sets \${MAKE}" >&5 echo "configure:754: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -798,7 +789,7 @@ fi ...@@ -798,7 +789,7 @@ fi
missing_dir=`cd $ac_aux_dir && pwd` missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
echo "configure:802: checking for working aclocal" >&5 echo "configure:793: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if # Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected. # an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh. # Redirect stdin to placate older versions of autoconf. Sigh.
...@@ -811,7 +802,7 @@ else ...@@ -811,7 +802,7 @@ else
fi fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
echo "configure:815: checking for working autoconf" >&5 echo "configure:806: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if # Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected. # an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh. # Redirect stdin to placate older versions of autoconf. Sigh.
...@@ -824,7 +815,7 @@ else ...@@ -824,7 +815,7 @@ else
fi fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6 echo $ac_n "checking for working automake""... $ac_c" 1>&6
echo "configure:828: checking for working automake" >&5 echo "configure:819: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if # Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected. # an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh. # Redirect stdin to placate older versions of autoconf. Sigh.
...@@ -837,7 +828,7 @@ else ...@@ -837,7 +828,7 @@ else
fi fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
echo "configure:841: checking for working autoheader" >&5 echo "configure:832: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if # Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected. # an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh. # Redirect stdin to placate older versions of autoconf. Sigh.
...@@ -850,7 +841,7 @@ else ...@@ -850,7 +841,7 @@ else
fi fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
echo "configure:854: checking for working makeinfo" >&5 echo "configure:845: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if # Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected. # an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh. # Redirect stdin to placate older versions of autoconf. Sigh.
...@@ -865,12 +856,12 @@ fi ...@@ -865,12 +856,12 @@ fi
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
echo "configure:869: checking for Cygwin environment" >&5 echo "configure:860: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 874 "configure" #line 865 "configure"
#include "confdefs.h" #include "confdefs.h"
int main() { int main() {
...@@ -881,7 +872,7 @@ int main() { ...@@ -881,7 +872,7 @@ int main() {
return __CYGWIN__; return __CYGWIN__;
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:885: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:876: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
ac_cv_cygwin=yes ac_cv_cygwin=yes
else else
...@@ -898,19 +889,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6 ...@@ -898,19 +889,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6
CYGWIN= CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
echo "configure:902: checking for mingw32 environment" >&5 echo "configure:893: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 907 "configure" #line 898 "configure"
#include "confdefs.h" #include "confdefs.h"
int main() { int main() {
return __MINGW32__; return __MINGW32__;
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:914: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:905: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
ac_cv_mingw32=yes ac_cv_mingw32=yes
else else
...@@ -929,7 +920,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=yes ...@@ -929,7 +920,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=yes
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
echo "configure:933: checking for executable suffix" >&5 echo "configure:924: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -939,10 +930,10 @@ else ...@@ -939,10 +930,10 @@ else
rm -f conftest* rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext= ac_cv_exeext=
if { (eval echo configure:943: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then if { (eval echo configure:934: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do for file in conftest.*; do
case $file in case $file in
*.c | *.o | *.obj | *.ilk | *.pdb) ;; *.c | *.o | *.obj) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac esac
done done
...@@ -960,7 +951,7 @@ echo "$ac_t""${ac_cv_exeext}" 1>&6 ...@@ -960,7 +951,7 @@ echo "$ac_t""${ac_cv_exeext}" 1>&6
ac_exeext=$EXEEXT ac_exeext=$EXEEXT
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:964: checking whether to enable maintainer-specific portions of Makefiles" >&5 echo "configure:955: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode" enableval="$enable_maintainer_mode"
...@@ -986,7 +977,7 @@ fi ...@@ -986,7 +977,7 @@ fi
# Extract the first word of "gcc", so it can be a program name with args. # Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2 set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:990: checking for $ac_word" >&5 echo "configure:981: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1016,7 +1007,7 @@ if test -z "$CC"; then ...@@ -1016,7 +1007,7 @@ if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args. # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2 set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1020: checking for $ac_word" >&5 echo "configure:1011: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1067,7 +1058,7 @@ fi ...@@ -1067,7 +1058,7 @@ fi
# Extract the first word of "cl", so it can be a program name with args. # Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2 set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1071: checking for $ac_word" >&5 echo "configure:1062: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1099,7 +1090,7 @@ fi ...@@ -1099,7 +1090,7 @@ fi
fi fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1103: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 echo "configure:1094: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
...@@ -1110,12 +1101,12 @@ cross_compiling=$ac_cv_prog_cc_cross ...@@ -1110,12 +1101,12 @@ cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext << EOF cat > conftest.$ac_ext << EOF
#line 1114 "configure" #line 1105 "configure"
#include "confdefs.h" #include "confdefs.h"
main(){return(0);} main(){return(0);}
EOF EOF
if { (eval echo configure:1119: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:1110: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler. # If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then if (./conftest; exit) 2>/dev/null; then
...@@ -1141,12 +1132,12 @@ if test $ac_cv_prog_cc_works = no; then ...@@ -1141,12 +1132,12 @@ if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1145: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "configure:1136: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1150: checking whether we are using GNU C" >&5 echo "configure:1141: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1155,7 +1146,7 @@ else ...@@ -1155,7 +1146,7 @@ else
yes; yes;
#endif #endif
EOF EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1159: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1150: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes ac_cv_prog_gcc=yes
else else
ac_cv_prog_gcc=no ac_cv_prog_gcc=no
...@@ -1174,7 +1165,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ...@@ -1174,7 +1165,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS" ac_save_CFLAGS="$CFLAGS"
CFLAGS= CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1178: checking whether ${CC-cc} accepts -g" >&5 echo "configure:1169: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1275,7 +1266,7 @@ else ...@@ -1275,7 +1266,7 @@ else
fi fi
echo $ac_n "checking build system type""... $ac_c" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:1279: checking build system type" >&5 echo "configure:1270: checking build system type" >&5
build_alias=$build build_alias=$build
case "$build_alias" in case "$build_alias" in
...@@ -1292,36 +1283,6 @@ build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` ...@@ -1292,36 +1283,6 @@ build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6 echo "$ac_t""$build" 1>&6
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1299: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# Check whether --with-gnu-ld or --without-gnu-ld was given. # Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then if test "${with_gnu_ld+set}" = set; then
withval="$with_gnu_ld" withval="$with_gnu_ld"
...@@ -1334,8 +1295,14 @@ ac_prog=ld ...@@ -1334,8 +1295,14 @@ ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path. # Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
echo "configure:1338: checking for ld used by GCC" >&5 echo "configure:1299: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5` case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case "$ac_prog" in case "$ac_prog" in
# Accept absolute paths. # Accept absolute paths.
[\\/]* | [A-Za-z]:[\\/]*) [\\/]* | [A-Za-z]:[\\/]*)
...@@ -1358,10 +1325,10 @@ echo "configure:1338: checking for ld used by GCC" >&5 ...@@ -1358,10 +1325,10 @@ echo "configure:1338: checking for ld used by GCC" >&5
esac esac
elif test "$with_gnu_ld" = yes; then elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
echo "configure:1362: checking for GNU ld" >&5 echo "configure:1329: checking for GNU ld" >&5
else else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
echo "configure:1365: checking for non-GNU ld" >&5 echo "configure:1332: checking for non-GNU ld" >&5
fi fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
...@@ -1396,7 +1363,7 @@ else ...@@ -1396,7 +1363,7 @@ else
fi fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
echo "configure:1400: checking if the linker ($LD) is GNU ld" >&5 echo "configure:1367: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1409,10 +1376,23 @@ fi ...@@ -1409,10 +1376,23 @@ fi
fi fi
echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6 echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
with_gnu_ld=$ac_cv_prog_gnu_ld
echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
echo "configure:1384: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
lt_cv_ld_reload_flag='-r'
fi
echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
reload_flag=$lt_cv_ld_reload_flag
test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
echo "configure:1416: checking for BSD-compatible nm" >&5 echo "configure:1396: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1423,18 +1403,20 @@ else ...@@ -1423,18 +1403,20 @@ else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=. test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then tmp_nm=$ac_dir/${ac_tool_prefix}nm
if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag. # Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says: # Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored # nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then # Tru64's nm complains that /dev/null is an invalid object file
ac_cv_path_NM="$ac_dir/nm -B" if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
ac_cv_path_NM="$tmp_nm -B"
break break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p" ac_cv_path_NM="$tmp_nm -p"
break break
else else
ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but ac_cv_path_NM=${ac_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags continue # so that we can try to find one that supports BSD flags
fi fi
fi fi
...@@ -1448,7 +1430,7 @@ NM="$ac_cv_path_NM" ...@@ -1448,7 +1430,7 @@ NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6 echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:1452: checking whether ln -s works" >&5 echo "configure:1434: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -1468,11 +1450,450 @@ else ...@@ -1468,11 +1450,450 @@ else
echo "$ac_t""no" 1>&6 echo "$ac_t""no" 1>&6
fi fi
echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
echo "configure:1455: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
lt_cv_file_magic_cmd='${MAGIC}'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [regex]' -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given egrep regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.
case "$host_os" in
aix4*)
lt_cv_deplibs_check_method=pass_all
;;
beos*)
lt_cv_deplibs_check_method=pass_all
;;
bsdi4*)
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
lt_cv_file_magic_cmd='/usr/bin/file -L'
lt_cv_file_magic_test_file=/shlib/libc.so
;;
cygwin* | mingw*)
lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
lt_cv_file_magic_cmd='${OBJDUMP} -f'
;;
freebsd* )
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
case "$host_cpu" in
i*86 )
# Not sure whether the presence of OpenBSD here was a mistake.
# Let's accept both of them until this is cleared up.
lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
esac
else
lt_cv_deplibs_check_method=pass_all
fi
;;
gnu*)
lt_cv_deplibs_check_method=pass_all
;;
hpux10.20*)
# TODO: Does this work for hpux-11 too?
lt_cv_deplibs_check_method='file_magic (s0-90-90-9|PA-RISC0-9.0-9) shared library'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
irix5* | irix6*)
case "$host_os" in
irix5*)
# this will be overridden with pass_all, but let us keep it just in case
lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
;;
*)
case "$LD" in
*-32|*"-32 ") libmagic=32-bit;;
*-n32|*"-n32 ") libmagic=N32;;
*-64|*"-64 ") libmagic=64-bit;;
*) libmagic=never-match;;
esac
# this will be overridden with pass_all, but let us keep it just in case
lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
;;
esac
lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
lt_cv_deplibs_check_method=pass_all
;;
# This must be Linux ELF.
linux-gnu*)
case "$host_cpu" in
alpha* | i*86 | powerpc* | sparc* | ia64* )
lt_cv_deplibs_check_method=pass_all ;;
*)
# glibc up to 2.1.1 does not perform some relocations on ARM
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
esac
lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then :
else
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
lt_cv_file_magic_cmd='/usr/bin/file -L'
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
fi
;;
osf3* | osf4* | osf5*)
# this will be overridden with pass_all, but let us keep it just in case
lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
lt_cv_file_magic_test_file=/shlib/libc.so
lt_cv_deplibs_check_method=pass_all
;;
sco3.2v5*)
lt_cv_deplibs_check_method=pass_all
;;
solaris*)
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_test_file=/lib/libc.so
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
case "$host_vendor" in
ncr)
lt_cv_deplibs_check_method=pass_all
;;
motorola)
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
;;
esac
;;
esac
fi
echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
echo $ac_n "checking for object suffix""... $ac_c" 1>&6
echo "configure:1598: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
if { (eval echo configure:1604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
for ac_file in conftest.*; do
case $ac_file in
*.c) ;;
*) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
esac
done
else
{ echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_objext" 1>&6
OBJEXT=$ac_cv_objext
ac_objext=$ac_cv_objext
if test $host != $build; then
ac_tool_prefix=${host_alias}-
else
ac_tool_prefix=
fi
# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
# Only perform the check for file, if the check method requires it
case "$deplibs_check_method" in
file_magic*)
if test "$file_magic_cmd" = '${MAGIC}'; then
echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
echo "configure:1634: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MAGIC" in
/*)
lt_cv_path_MAGIC="$MAGIC" # Let the user override the test with a path.
;;
?:/*)
ac_cv_path_MAGIC="$MAGIC" # Let the user override the test with a dos path.
;;
*)
ac_save_MAGIC="$MAGIC"
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="/usr/bin:$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/${ac_tool_prefix}file; then
lt_cv_path_MAGIC="$ac_dir/${ac_tool_prefix}file"
if test -n "$file_magic_test_file"; then
case "$deplibs_check_method" in
"file_magic "*)
file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
MAGIC="$lt_cv_path_MAGIC"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
egrep "$file_magic_regex" > /dev/null; then
:
else
cat <<EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such. This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem. Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
case "$target" in EOF
NONE) lt_target="$host" ;; fi ;;
*) lt_target="$target" ;; esac
fi
break
fi
done
IFS="$ac_save_ifs"
MAGIC="$ac_save_MAGIC"
;;
esac esac
fi
MAGIC="$lt_cv_path_MAGIC"
if test -n "$MAGIC"; then
echo "$ac_t""$MAGIC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$lt_cv_path_MAGIC"; then
if test -n "$ac_tool_prefix"; then
echo $ac_n "checking for file""... $ac_c" 1>&6
echo "configure:1696: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MAGIC" in
/*)
lt_cv_path_MAGIC="$MAGIC" # Let the user override the test with a path.
;;
?:/*)
ac_cv_path_MAGIC="$MAGIC" # Let the user override the test with a dos path.
;;
*)
ac_save_MAGIC="$MAGIC"
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="/usr/bin:$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/file; then
lt_cv_path_MAGIC="$ac_dir/file"
if test -n "$file_magic_test_file"; then
case "$deplibs_check_method" in
"file_magic "*)
file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
MAGIC="$lt_cv_path_MAGIC"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
egrep "$file_magic_regex" > /dev/null; then
:
else
cat <<EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such. This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem. Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
EOF
fi ;;
esac
fi
break
fi
done
IFS="$ac_save_ifs"
MAGIC="$ac_save_MAGIC"
;;
esac
fi
MAGIC="$lt_cv_path_MAGIC"
if test -n "$MAGIC"; then
echo "$ac_t""$MAGIC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
else
MAGIC=:
fi
fi
fi
;;
esac
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1767: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$ac_cv_prog_RANLIB"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1799: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
else
RANLIB=":"
fi
fi
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1834: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$STRIP"; then
ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
STRIP="$ac_cv_prog_STRIP"
if test -n "$STRIP"; then
echo "$ac_t""$STRIP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$ac_cv_prog_STRIP"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1866: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$STRIP"; then
ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_STRIP="strip"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
fi
fi
STRIP="$ac_cv_prog_STRIP"
if test -n "$STRIP"; then
echo "$ac_t""$STRIP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
else
STRIP=":"
fi
fi
# Check for any special flags to pass to ltconfig. # Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file" libtool_flags="--cache-file=$cache_file"
...@@ -1492,13 +1913,24 @@ fi ...@@ -1492,13 +1913,24 @@ fi
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Check whether --with-pic or --without-pic was given.
if test "${with_pic+set}" = set; then
withval="$with_pic"
pic_mode="$withval"
else
pic_mode=default
fi
test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
# Some flags need to be propagated to the compiler or linker for good # Some flags need to be propagated to the compiler or linker for good
# libtool support. # libtool support.
case "$lt_target" in case "$host" in
*-*-irix6*) *-*-irix6*)
# Find out which ABI we are using. # Find out which ABI we are using.
echo '#line 1501 "configure"' > conftest.$ac_ext echo '#line 1933 "configure"' > conftest.$ac_ext
if { (eval echo configure:1502: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:1934: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in case "`/usr/bin/file conftest.o`" in
*32-bit*) *32-bit*)
LD="${LD-ld} -32" LD="${LD-ld} -32"
...@@ -1519,19 +1951,27 @@ case "$lt_target" in ...@@ -1519,19 +1951,27 @@ case "$lt_target" in
SAVE_CFLAGS="$CFLAGS" SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf" CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
echo "configure:1523: checking whether the C compiler needs -belf" >&5 echo "configure:1955: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF
#line 1528 "configure" ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
#line 1968 "configure"
#include "confdefs.h" #include "confdefs.h"
int main() { int main() {
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:1535: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:1975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
lt_cv_cc_needs_belf=yes lt_cv_cc_needs_belf=yes
else else
...@@ -1541,6 +1981,13 @@ else ...@@ -1541,6 +1981,13 @@ else
lt_cv_cc_needs_belf=no lt_cv_cc_needs_belf=no
fi fi
rm -f conftest* rm -f conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
fi fi
echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
...@@ -1604,12 +2051,14 @@ rm -f confcache ...@@ -1604,12 +2051,14 @@ rm -f confcache
# Actually configure libtool. ac_aux_dir is where install-sh is found. # Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ MAGIC="$MAGIC" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ $libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; } || { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig # Reload cache, that may have been modified by ltconfig
...@@ -1623,7 +2072,7 @@ fi ...@@ -1623,7 +2072,7 @@ fi
# This can be used to rebuild libtool when needed # This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
# Always use our own libtool. # Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool' LIBTOOL='$(SHELL) $(top_builddir)/libtool'
...@@ -1633,6 +2082,11 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool' ...@@ -1633,6 +2082,11 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
exec 5>>./config.log exec 5>>./config.log
TARGETDIR="unknown" TARGETDIR="unknown"
case "$host" in case "$host" in
mips-sgi-irix5.* | mips-sgi-irix6.*) TARGET=MIPS; TARGETDIR=mips;; mips-sgi-irix5.* | mips-sgi-irix6.*) TARGET=MIPS; TARGETDIR=mips;;
...@@ -1739,7 +2193,7 @@ else ...@@ -1739,7 +2193,7 @@ else
fi fi
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:1742: checking how to run the C preprocessor" >&5 echo "configure:2197: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory. # On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then if test -n "$CPP" && test -d "$CPP"; then
CPP= CPP=
...@@ -1754,13 +2208,13 @@ else ...@@ -1754,13 +2208,13 @@ else
# On the NeXT, cc -E runs the code through the compiler's parser, # On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. # not just through cpp.
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 1757 "configure" #line 2212 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <assert.h> #include <assert.h>
Syntax Error Syntax Error
EOF EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1763: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } { (eval echo configure:2218: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then if test -z "$ac_err"; then
: :
...@@ -1771,13 +2225,13 @@ else ...@@ -1771,13 +2225,13 @@ else
rm -rf conftest* rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp" CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 1774 "configure" #line 2229 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <assert.h> #include <assert.h>
Syntax Error Syntax Error
EOF EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1780: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } { (eval echo configure:2235: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then if test -z "$ac_err"; then
: :
...@@ -1788,13 +2242,13 @@ else ...@@ -1788,13 +2242,13 @@ else
rm -rf conftest* rm -rf conftest*
CPP="${CC-cc} -nologo -E" CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 1791 "configure" #line 2246 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <assert.h> #include <assert.h>
Syntax Error Syntax Error
EOF EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } { (eval echo configure:2252: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then if test -z "$ac_err"; then
: :
...@@ -1819,12 +2273,12 @@ fi ...@@ -1819,12 +2273,12 @@ fi
echo "$ac_t""$CPP" 1>&6 echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
echo "configure:1822: checking for ANSI C header files" >&5 echo "configure:2277: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 1827 "configure" #line 2282 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <stdlib.h> #include <stdlib.h>
#include <stdarg.h> #include <stdarg.h>
...@@ -1832,7 +2286,7 @@ else ...@@ -1832,7 +2286,7 @@ else
#include <float.h> #include <float.h>
EOF EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1835: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } { (eval echo configure:2290: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then if test -z "$ac_err"; then
rm -rf conftest* rm -rf conftest*
...@@ -1849,7 +2303,7 @@ rm -f conftest* ...@@ -1849,7 +2303,7 @@ rm -f conftest*
if test $ac_cv_header_stdc = yes; then if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI. # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 1852 "configure" #line 2307 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <string.h> #include <string.h>
EOF EOF
...@@ -1867,7 +2321,7 @@ fi ...@@ -1867,7 +2321,7 @@ fi
if test $ac_cv_header_stdc = yes; then if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 1870 "configure" #line 2325 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <stdlib.h> #include <stdlib.h>
EOF EOF
...@@ -1888,7 +2342,7 @@ if test "$cross_compiling" = yes; then ...@@ -1888,7 +2342,7 @@ if test "$cross_compiling" = yes; then
: :
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 1891 "configure" #line 2346 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <ctype.h> #include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
...@@ -1899,7 +2353,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); ...@@ -1899,7 +2353,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); } exit (0); }
EOF EOF
if { (eval echo configure:1902: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:2357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
: :
else else
...@@ -1925,12 +2379,12 @@ fi ...@@ -1925,12 +2379,12 @@ fi
for ac_func in memcpy for ac_func in memcpy
do do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:1928: checking for $ac_func" >&5 echo "configure:2383: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 1933 "configure" #line 2388 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -1953,7 +2407,7 @@ $ac_func(); ...@@ -1953,7 +2407,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:1956: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:2411: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -1980,19 +2434,19 @@ done ...@@ -1980,19 +2434,19 @@ done
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless! # for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
echo "configure:1983: checking for working alloca.h" >&5 echo "configure:2438: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 1988 "configure" #line 2443 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <alloca.h> #include <alloca.h>
int main() { int main() {
char *p = alloca(2 * sizeof(int)); char *p = alloca(2 * sizeof(int));
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:1995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:2450: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
ac_cv_header_alloca_h=yes ac_cv_header_alloca_h=yes
else else
...@@ -2013,12 +2467,12 @@ EOF ...@@ -2013,12 +2467,12 @@ EOF
fi fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6 echo $ac_n "checking for alloca""... $ac_c" 1>&6
echo "configure:2016: checking for alloca" >&5 echo "configure:2471: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 2021 "configure" #line 2476 "configure"
#include "confdefs.h" #include "confdefs.h"
#ifdef __GNUC__ #ifdef __GNUC__
...@@ -2046,7 +2500,7 @@ int main() { ...@@ -2046,7 +2500,7 @@ int main() {
char *p = (char *) alloca(1); char *p = (char *) alloca(1);
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:2049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:2504: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
ac_cv_func_alloca_works=yes ac_cv_func_alloca_works=yes
else else
...@@ -2078,12 +2532,12 @@ EOF ...@@ -2078,12 +2532,12 @@ EOF
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
echo "configure:2081: checking whether alloca needs Cray hooks" >&5 echo "configure:2536: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 2086 "configure" #line 2541 "configure"
#include "confdefs.h" #include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2) #if defined(CRAY) && ! defined(CRAY2)
webecray webecray
...@@ -2108,12 +2562,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 ...@@ -2108,12 +2562,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
if test $ac_cv_os_cray = yes; then if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2111: checking for $ac_func" >&5 echo "configure:2566: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 2116 "configure" #line 2571 "configure"
#include "confdefs.h" #include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes, /* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */ which can conflict with char $ac_func(); below. */
...@@ -2136,7 +2590,7 @@ $ac_func(); ...@@ -2136,7 +2590,7 @@ $ac_func();
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:2139: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then if { (eval echo configure:2594: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest* rm -rf conftest*
eval "ac_cv_func_$ac_func=yes" eval "ac_cv_func_$ac_func=yes"
else else
...@@ -2163,7 +2617,7 @@ done ...@@ -2163,7 +2617,7 @@ done
fi fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
echo "configure:2166: checking stack direction for C alloca" >&5 echo "configure:2621: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -2171,7 +2625,7 @@ else ...@@ -2171,7 +2625,7 @@ else
ac_cv_c_stack_direction=0 ac_cv_c_stack_direction=0
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 2174 "configure" #line 2629 "configure"
#include "confdefs.h" #include "confdefs.h"
find_stack_direction () find_stack_direction ()
{ {
...@@ -2190,7 +2644,7 @@ main () ...@@ -2190,7 +2644,7 @@ main ()
exit (find_stack_direction() < 0); exit (find_stack_direction() < 0);
} }
EOF EOF
if { (eval echo configure:2193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:2648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_c_stack_direction=1 ac_cv_c_stack_direction=1
else else
...@@ -2213,7 +2667,7 @@ fi ...@@ -2213,7 +2667,7 @@ fi
echo $ac_n "checking size of short""... $ac_c" 1>&6 echo $ac_n "checking size of short""... $ac_c" 1>&6
echo "configure:2216: checking size of short" >&5 echo "configure:2671: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -2221,7 +2675,7 @@ else ...@@ -2221,7 +2675,7 @@ else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 2224 "configure" #line 2679 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <stdio.h> #include <stdio.h>
main() main()
...@@ -2232,7 +2686,7 @@ main() ...@@ -2232,7 +2686,7 @@ main()
exit(0); exit(0);
} }
EOF EOF
if { (eval echo configure:2235: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:2690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_sizeof_short=`cat conftestval` ac_cv_sizeof_short=`cat conftestval`
else else
...@@ -2252,7 +2706,7 @@ EOF ...@@ -2252,7 +2706,7 @@ EOF
echo $ac_n "checking size of int""... $ac_c" 1>&6 echo $ac_n "checking size of int""... $ac_c" 1>&6
echo "configure:2255: checking size of int" >&5 echo "configure:2710: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -2260,7 +2714,7 @@ else ...@@ -2260,7 +2714,7 @@ else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 2263 "configure" #line 2718 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <stdio.h> #include <stdio.h>
main() main()
...@@ -2271,7 +2725,7 @@ main() ...@@ -2271,7 +2725,7 @@ main()
exit(0); exit(0);
} }
EOF EOF
if { (eval echo configure:2274: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:2729: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_sizeof_int=`cat conftestval` ac_cv_sizeof_int=`cat conftestval`
else else
...@@ -2291,7 +2745,7 @@ EOF ...@@ -2291,7 +2745,7 @@ EOF
echo $ac_n "checking size of long""... $ac_c" 1>&6 echo $ac_n "checking size of long""... $ac_c" 1>&6
echo "configure:2294: checking size of long" >&5 echo "configure:2749: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -2299,7 +2753,7 @@ else ...@@ -2299,7 +2753,7 @@ else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 2302 "configure" #line 2757 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <stdio.h> #include <stdio.h>
main() main()
...@@ -2310,7 +2764,7 @@ main() ...@@ -2310,7 +2764,7 @@ main()
exit(0); exit(0);
} }
EOF EOF
if { (eval echo configure:2313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:2768: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_sizeof_long=`cat conftestval` ac_cv_sizeof_long=`cat conftestval`
else else
...@@ -2330,7 +2784,7 @@ EOF ...@@ -2330,7 +2784,7 @@ EOF
echo $ac_n "checking size of long long""... $ac_c" 1>&6 echo $ac_n "checking size of long long""... $ac_c" 1>&6
echo "configure:2333: checking size of long long" >&5 echo "configure:2788: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -2338,7 +2792,7 @@ else ...@@ -2338,7 +2792,7 @@ else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 2341 "configure" #line 2796 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <stdio.h> #include <stdio.h>
main() main()
...@@ -2349,7 +2803,7 @@ main() ...@@ -2349,7 +2803,7 @@ main()
exit(0); exit(0);
} }
EOF EOF
if { (eval echo configure:2352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:2807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_sizeof_long_long=`cat conftestval` ac_cv_sizeof_long_long=`cat conftestval`
else else
...@@ -2369,7 +2823,7 @@ EOF ...@@ -2369,7 +2823,7 @@ EOF
echo $ac_n "checking size of float""... $ac_c" 1>&6 echo $ac_n "checking size of float""... $ac_c" 1>&6
echo "configure:2372: checking size of float" >&5 echo "configure:2827: checking size of float" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_float'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_sizeof_float'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -2377,7 +2831,7 @@ else ...@@ -2377,7 +2831,7 @@ else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 2380 "configure" #line 2835 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <stdio.h> #include <stdio.h>
main() main()
...@@ -2388,7 +2842,7 @@ main() ...@@ -2388,7 +2842,7 @@ main()
exit(0); exit(0);
} }
EOF EOF
if { (eval echo configure:2391: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:2846: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_sizeof_float=`cat conftestval` ac_cv_sizeof_float=`cat conftestval`
else else
...@@ -2408,7 +2862,7 @@ EOF ...@@ -2408,7 +2862,7 @@ EOF
echo $ac_n "checking size of double""... $ac_c" 1>&6 echo $ac_n "checking size of double""... $ac_c" 1>&6
echo "configure:2411: checking size of double" >&5 echo "configure:2866: checking size of double" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_double'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_sizeof_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -2416,7 +2870,7 @@ else ...@@ -2416,7 +2870,7 @@ else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 2419 "configure" #line 2874 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <stdio.h> #include <stdio.h>
main() main()
...@@ -2427,7 +2881,7 @@ main() ...@@ -2427,7 +2881,7 @@ main()
exit(0); exit(0);
} }
EOF EOF
if { (eval echo configure:2430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:2885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_sizeof_double=`cat conftestval` ac_cv_sizeof_double=`cat conftestval`
else else
...@@ -2447,7 +2901,7 @@ EOF ...@@ -2447,7 +2901,7 @@ EOF
echo $ac_n "checking size of long double""... $ac_c" 1>&6 echo $ac_n "checking size of long double""... $ac_c" 1>&6
echo "configure:2450: checking size of long double" >&5 echo "configure:2905: checking size of long double" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_double'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_sizeof_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -2455,7 +2909,7 @@ else ...@@ -2455,7 +2909,7 @@ else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 2458 "configure" #line 2913 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <stdio.h> #include <stdio.h>
main() main()
...@@ -2466,7 +2920,7 @@ main() ...@@ -2466,7 +2920,7 @@ main()
exit(0); exit(0);
} }
EOF EOF
if { (eval echo configure:2469: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:2924: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_sizeof_long_double=`cat conftestval` ac_cv_sizeof_long_double=`cat conftestval`
else else
...@@ -2487,7 +2941,7 @@ EOF ...@@ -2487,7 +2941,7 @@ EOF
echo $ac_n "checking size of void *""... $ac_c" 1>&6 echo $ac_n "checking size of void *""... $ac_c" 1>&6
echo "configure:2490: checking size of void *" >&5 echo "configure:2945: checking size of void *" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
...@@ -2495,7 +2949,7 @@ else ...@@ -2495,7 +2949,7 @@ else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 2498 "configure" #line 2953 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <stdio.h> #include <stdio.h>
main() main()
...@@ -2506,7 +2960,7 @@ main() ...@@ -2506,7 +2960,7 @@ main()
exit(0); exit(0);
} }
EOF EOF
if { (eval echo configure:2509: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:2964: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_sizeof_void_p=`cat conftestval` ac_cv_sizeof_void_p=`cat conftestval`
else else
...@@ -2526,14 +2980,14 @@ EOF ...@@ -2526,14 +2980,14 @@ EOF
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
echo "configure:2529: checking whether byte ordering is bigendian" >&5 echo "configure:2984: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6 echo $ac_n "(cached) $ac_c" 1>&6
else else
ac_cv_c_bigendian=unknown ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro. # See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 2536 "configure" #line 2991 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <sys/types.h> #include <sys/types.h>
#include <sys/param.h> #include <sys/param.h>
...@@ -2544,11 +2998,11 @@ int main() { ...@@ -2544,11 +2998,11 @@ int main() {
#endif #endif
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:2547: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:3002: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not. # It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 2551 "configure" #line 3006 "configure"
#include "confdefs.h" #include "confdefs.h"
#include <sys/types.h> #include <sys/types.h>
#include <sys/param.h> #include <sys/param.h>
...@@ -2559,7 +3013,7 @@ int main() { ...@@ -2559,7 +3013,7 @@ int main() {
#endif #endif
; return 0; } ; return 0; }
EOF EOF
if { (eval echo configure:2562: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then if { (eval echo configure:3017: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest* rm -rf conftest*
ac_cv_c_bigendian=yes ac_cv_c_bigendian=yes
else else
...@@ -2579,7 +3033,7 @@ if test "$cross_compiling" = yes; then ...@@ -2579,7 +3033,7 @@ if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else else
cat > conftest.$ac_ext <<EOF cat > conftest.$ac_ext <<EOF
#line 2582 "configure" #line 3037 "configure"
#include "confdefs.h" #include "confdefs.h"
main () { main () {
/* Are we little or big endian? From Harbison&Steele. */ /* Are we little or big endian? From Harbison&Steele. */
...@@ -2592,7 +3046,7 @@ main () { ...@@ -2592,7 +3046,7 @@ main () {
exit (u.c[sizeof (long) - 1] == 1); exit (u.c[sizeof (long) - 1] == 1);
} }
EOF EOF
if { (eval echo configure:2595: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null if { (eval echo configure:3050: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then then
ac_cv_c_bigendian=no ac_cv_c_bigendian=no
else else
...@@ -2837,8 +3291,10 @@ s%@build_alias@%$build_alias%g ...@@ -2837,8 +3291,10 @@ s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g s%@build_os@%$build_os%g
s%@RANLIB@%$RANLIB%g
s%@LN_S@%$LN_S%g s%@LN_S@%$LN_S%g
s%@OBJEXT@%$OBJEXT%g
s%@RANLIB@%$RANLIB%g
s%@STRIP@%$STRIP%g
s%@LIBTOOL@%$LIBTOOL%g s%@LIBTOOL@%$LIBTOOL%g
s%@MIPS_GCC_TRUE@%$MIPS_GCC_TRUE%g s%@MIPS_GCC_TRUE@%$MIPS_GCC_TRUE%g
s%@MIPS_GCC_FALSE@%$MIPS_GCC_FALSE%g s%@MIPS_GCC_FALSE@%$MIPS_GCC_FALSE%g
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment