Skip to content

R
riscv-gcc-1
Commit 2d309510 by Paolo Bonzini Committed by Paolo Bonzini
Options

re PR middle-end/24252 (Missing "warning: control reaches end of non-void… 

re PR middle-end/24252 (Missing "warning: control reaches end of non-void function" in static function)

2006-01-04  Paolo Bonzini  <bonzini@gnu.org>

	PR bootstrap/24252

	* Makefile.def (flags_to_pass): Add STAGE1_CFLAGS and STAGE1_LANGUAGES.
	* Makefile.tpl (OBJDUMP): New.
	(EXTRA_HOST_FLAGS): Add it.
	(EXTRA_GCC_FLAGS): Remove flags already specified in flags_to_pass.

        * Makefile.tpl (stage[+id+]-start, stage[+id+]-end): Do not try
        to use symbolic links between directories.  Avoid race conditions
        or make them harmless.
        * configure.in: Do not try to use symbolic links between directories.

	* Makefile.def (LEAN): Pass.
	* Makefile.tpl (LEAN): Define.
	(stage[+id+]-start): Accept that the previous directory does not
	exist, if the bootstrap is lean.
	(stage[+id+]-bubble): Invoke lean bootstrap commands after
	stage[+id+]-start.  Use a makefile variable and an `if' instead of a
	configure substitution.
	([+compare-target+]): Likewise.
	([+bootstrap-target+]-lean): New.
	* configure.in: Remove lean bootstrap support from here.

        * Makefile.in: Regenerate.
        * configure: Regenerate.

From-SVN: r109325
parent f7ace77f
Showing with 564 additions and 805 deletions
ChangeLog
2006-01-04 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/24252
* Makefile.def (flags_to_pass): Add STAGE1_CFLAGS and STAGE1_LANGUAGES.
* Makefile.tpl (OBJDUMP): New.
(EXTRA_HOST_FLAGS): Add it.
(EXTRA_GCC_FLAGS): Remove flags already specified in flags_to_pass.
* Makefile.tpl (stage[+id+]-start, stage[+id+]-end): Do not try
to use symbolic links between directories. Avoid race conditions
or make them harmless.
* configure.in: Do not try to use symbolic links between directories.
* Makefile.def (LEAN): Pass.
* Makefile.tpl (LEAN): Define.
(stage[+id+]-start): Accept that the previous directory does not
exist, if the bootstrap is lean.
(stage[+id+]-bubble): Invoke lean bootstrap commands after
stage[+id+]-start. Use a makefile variable and an `if' instead of a
configure substitution.
([+compare-target+]): Likewise.
([+bootstrap-target+]-lean): New.
* configure.in: Remove lean bootstrap support from here.
* Makefile.in: Regenerate.
* configure: Regenerate.
2006-01-04 Ben Elliston <bje@au.ibm.com>
* MAINTAINERS (libdecnumber): Add myself.
......
Makefile.def
......@@ -4,7 +4,7 @@ AutoGen definitions Makefile.tpl;
// Makefile.in is generated from Makefile.tpl by 'autogen Makefile.def'.
// This file was originally written by Nathanael Nerode.
//
// Copyright 2002, 2003 Free Software Foundation
// Copyright 2002, 2003, 2004, 2005, 2006 Free Software Foundation
//
// This file is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
......@@ -213,6 +213,8 @@ flags_to_pass = { flag= CXXFLAGS ; };
flags_to_pass = { flag= LDFLAGS ; };
flags_to_pass = { flag= LIBCFLAGS ; };
flags_to_pass = { flag= LIBCXXFLAGS ; };
flags_to_pass = { flag= STAGE1_CFLAGS ; };
flags_to_pass = { flag= STAGE1_LANGUAGES ; };
// Target tools
flags_to_pass = { flag= AR_FOR_TARGET ; };
......@@ -236,6 +238,9 @@ flags_to_pass = { flag= RANLIB_FOR_TARGET ; };
flags_to_pass = { flag= STRIP_FOR_TARGET ; };
flags_to_pass = { flag= WINDRES_FOR_TARGET ; };
// Miscellaneous
flags_to_pass = { flag= LEAN ; };
// Inter-module dependencies
// Build modules
......
Makefile.in
......@@ -3,7 +3,7 @@
#
# Makefile for directory with subdirs to build.
# Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
# 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation
# 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
......@@ -282,6 +282,7 @@ DLLTOOL = @DLLTOOL@
LD = @LD@
LIPO = @LIPO@
NM = @NM@
OBJDUMP = @OBJDUMP@
RANLIB = @RANLIB@
STRIP = @STRIP@
WINDRES = @WINDRES@
......@@ -440,6 +441,8 @@ BASE_FLAGS_TO_PASS = \
"LDFLAGS=$(LDFLAGS)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"LIBCXXFLAGS=$(LIBCXXFLAGS)" \
"STAGE1_CFLAGS=$(STAGE1_CFLAGS)" \
"STAGE1_LANGUAGES=$(STAGE1_LANGUAGES)" \
"AR_FOR_TARGET=$(AR_FOR_TARGET)" \
"AS_FOR_TARGET=$(AS_FOR_TARGET)" \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
......@@ -460,6 +463,7 @@ BASE_FLAGS_TO_PASS = \
"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
"STRIP_FOR_TARGET=$(STRIP_FOR_TARGET)" \
"WINDRES_FOR_TARGET=$(WINDRES_FOR_TARGET)" \
"LEAN=$(LEAN)" \
"CONFIG_SHELL=$(SHELL)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)"
......@@ -477,6 +481,7 @@ EXTRA_HOST_FLAGS = \
'LD=$(LD)' \
'LIPO=$(LIPO)' \
'NM=$(NM)' \
'OBJDUMP=$(OBJDUMP)' \
'RANLIB=$(RANLIB)' \
'STRIP=$(STRIP)' \
'WINDRES=$(WINDRES)'
......@@ -534,8 +539,6 @@ EXTRA_GCC_FLAGS = \
"`echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
"`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
"`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
"`echo 'STAGE1_CFLAGS=$(STAGE1_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
"`echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
"`echo 'BOOT_ADAFLAGS=$(BOOT_ADAFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`"
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) $(EXTRA_GCC_FLAGS)
......@@ -35679,6 +35682,9 @@ unstage:
stage:
@: $(MAKE); $(stage)
# Disable commands for lean bootstrap.
LEAN = false
# We name the build directories for the various stages "stage1-gcc",
# "stage2-gcc","stage3-gcc", etc.
......@@ -35733,146 +35739,122 @@ stage1-start::
@if bfd
@cd $(HOST_SUBDIR); [ -d stage1-bfd ] || \
mkdir stage1-bfd; \
set stage1-bfd bfd ; \
@CREATE_LINK_TO_DIR@
mv stage1-bfd bfd
@endif bfd
@if opcodes
@cd $(HOST_SUBDIR); [ -d stage1-opcodes ] || \
mkdir stage1-opcodes; \
set stage1-opcodes opcodes ; \
@CREATE_LINK_TO_DIR@
mv stage1-opcodes opcodes
@endif opcodes
@if binutils
@cd $(HOST_SUBDIR); [ -d stage1-binutils ] || \
mkdir stage1-binutils; \
set stage1-binutils binutils ; \
@CREATE_LINK_TO_DIR@
mv stage1-binutils binutils
@endif binutils
@if gas
@cd $(HOST_SUBDIR); [ -d stage1-gas ] || \
mkdir stage1-gas; \
set stage1-gas gas ; \
@CREATE_LINK_TO_DIR@
mv stage1-gas gas
@endif gas
@if gcc
@cd $(HOST_SUBDIR); [ -d stage1-gcc ] || \
mkdir stage1-gcc; \
set stage1-gcc gcc ; \
@CREATE_LINK_TO_DIR@
mv stage1-gcc gcc
@endif gcc
@if intl
@cd $(HOST_SUBDIR); [ -d stage1-intl ] || \
mkdir stage1-intl; \
set stage1-intl intl ; \
@CREATE_LINK_TO_DIR@
mv stage1-intl intl
@endif intl
@if ld
@cd $(HOST_SUBDIR); [ -d stage1-ld ] || \
mkdir stage1-ld; \
set stage1-ld ld ; \
@CREATE_LINK_TO_DIR@
mv stage1-ld ld
@endif ld
@if libcpp
@cd $(HOST_SUBDIR); [ -d stage1-libcpp ] || \
mkdir stage1-libcpp; \
set stage1-libcpp libcpp ; \
@CREATE_LINK_TO_DIR@
mv stage1-libcpp libcpp
@endif libcpp
@if libdecnumber
@cd $(HOST_SUBDIR); [ -d stage1-libdecnumber ] || \
mkdir stage1-libdecnumber; \
set stage1-libdecnumber libdecnumber ; \
@CREATE_LINK_TO_DIR@
mv stage1-libdecnumber libdecnumber
@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stage1-libiberty ] || \
mkdir stage1-libiberty; \
set stage1-libiberty libiberty ; \
@CREATE_LINK_TO_DIR@
mv stage1-libiberty libiberty
@endif libiberty
@if zlib
@cd $(HOST_SUBDIR); [ -d stage1-zlib ] || \
mkdir stage1-zlib; \
set stage1-zlib zlib ; \
@CREATE_LINK_TO_DIR@
mv stage1-zlib zlib
@endif zlib
@[ -d stage1-$(TARGET_SUBDIR) ] || \
mkdir stage1-$(TARGET_SUBDIR); \
set stage1-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \
@CREATE_LINK_TO_DIR@
mv stage1-$(TARGET_SUBDIR) $(TARGET_SUBDIR)
stage1-end::
@rm -f stage_current
@if bfd
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set bfd stage1-bfd ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/bfd ; then \
cd $(HOST_SUBDIR); mv bfd stage1-bfd ; \
fi
@endif bfd
@if opcodes
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set opcodes stage1-opcodes ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/opcodes ; then \
cd $(HOST_SUBDIR); mv opcodes stage1-opcodes ; \
fi
@endif opcodes
@if binutils
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set binutils stage1-binutils ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/binutils ; then \
cd $(HOST_SUBDIR); mv binutils stage1-binutils ; \
fi
@endif binutils
@if gas
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set gas stage1-gas ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/gas ; then \
cd $(HOST_SUBDIR); mv gas stage1-gas ; \
fi
@endif gas
@if gcc
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set gcc stage1-gcc ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/gcc ; then \
cd $(HOST_SUBDIR); mv gcc stage1-gcc ; \
fi
@endif gcc
@if intl
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set intl stage1-intl ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/intl ; then \
cd $(HOST_SUBDIR); mv intl stage1-intl ; \
fi
@endif intl
@if ld
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set ld stage1-ld ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/ld ; then \
cd $(HOST_SUBDIR); mv ld stage1-ld ; \
fi
@endif ld
@if libcpp
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libcpp stage1-libcpp ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libcpp ; then \
cd $(HOST_SUBDIR); mv libcpp stage1-libcpp ; \
fi
@endif libcpp
@if libdecnumber
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libdecnumber stage1-libdecnumber ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libdecnumber ; then \
cd $(HOST_SUBDIR); mv libdecnumber stage1-libdecnumber ; \
fi
@endif libdecnumber
@if libiberty
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libiberty stage1-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libiberty ; then \
cd $(HOST_SUBDIR); mv libiberty stage1-libiberty ; \
fi
@endif libiberty
@if zlib
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set zlib stage1-zlib ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/zlib ; then \
cd $(HOST_SUBDIR); mv zlib stage1-zlib ; \
fi
@endif zlib
@if test -d $(TARGET_SUBDIR) ; then \
set $(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR) ; \
@UNDO_LINK_TO_DIR@ ; \
mv $(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR) ; \
fi
rm -f stage_current
# Bubble a bugfix through all the stages up to stage 1. They are
# remade, but not reconfigured. The next stage (if any) will not be
......@@ -35919,194 +35901,146 @@ stage2-start::
@if bfd
@cd $(HOST_SUBDIR); [ -d stage2-bfd ] || \
mkdir stage2-bfd; \
set stage2-bfd bfd ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-bfd prev-bfd ; \
@CREATE_LINK_TO_DIR@
mv stage2-bfd bfd ; \
mv stage1-bfd prev-bfd || test -f stage1-lean
@endif bfd
@if opcodes
@cd $(HOST_SUBDIR); [ -d stage2-opcodes ] || \
mkdir stage2-opcodes; \
set stage2-opcodes opcodes ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-opcodes prev-opcodes ; \
@CREATE_LINK_TO_DIR@
mv stage2-opcodes opcodes ; \
mv stage1-opcodes prev-opcodes || test -f stage1-lean
@endif opcodes
@if binutils
@cd $(HOST_SUBDIR); [ -d stage2-binutils ] || \
mkdir stage2-binutils; \
set stage2-binutils binutils ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-binutils prev-binutils ; \
@CREATE_LINK_TO_DIR@
mv stage2-binutils binutils ; \
mv stage1-binutils prev-binutils || test -f stage1-lean
@endif binutils
@if gas
@cd $(HOST_SUBDIR); [ -d stage2-gas ] || \
mkdir stage2-gas; \
set stage2-gas gas ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-gas prev-gas ; \
@CREATE_LINK_TO_DIR@
mv stage2-gas gas ; \
mv stage1-gas prev-gas || test -f stage1-lean
@endif gas
@if gcc
@cd $(HOST_SUBDIR); [ -d stage2-gcc ] || \
mkdir stage2-gcc; \
set stage2-gcc gcc ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-gcc prev-gcc ; \
@CREATE_LINK_TO_DIR@
mv stage2-gcc gcc ; \
mv stage1-gcc prev-gcc || test -f stage1-lean
@endif gcc
@if intl
@cd $(HOST_SUBDIR); [ -d stage2-intl ] || \
mkdir stage2-intl; \
set stage2-intl intl ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-intl prev-intl ; \
@CREATE_LINK_TO_DIR@
mv stage2-intl intl ; \
mv stage1-intl prev-intl || test -f stage1-lean
@endif intl
@if ld
@cd $(HOST_SUBDIR); [ -d stage2-ld ] || \
mkdir stage2-ld; \
set stage2-ld ld ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-ld prev-ld ; \
@CREATE_LINK_TO_DIR@
mv stage2-ld ld ; \
mv stage1-ld prev-ld || test -f stage1-lean
@endif ld
@if libcpp
@cd $(HOST_SUBDIR); [ -d stage2-libcpp ] || \
mkdir stage2-libcpp; \
set stage2-libcpp libcpp ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-libcpp prev-libcpp ; \
@CREATE_LINK_TO_DIR@
mv stage2-libcpp libcpp ; \
mv stage1-libcpp prev-libcpp || test -f stage1-lean
@endif libcpp
@if libdecnumber
@cd $(HOST_SUBDIR); [ -d stage2-libdecnumber ] || \
mkdir stage2-libdecnumber; \
set stage2-libdecnumber libdecnumber ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-libdecnumber prev-libdecnumber ; \
@CREATE_LINK_TO_DIR@
mv stage2-libdecnumber libdecnumber ; \
mv stage1-libdecnumber prev-libdecnumber || test -f stage1-lean
@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stage2-libiberty ] || \
mkdir stage2-libiberty; \
set stage2-libiberty libiberty ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-libiberty prev-libiberty ; \
@CREATE_LINK_TO_DIR@
mv stage2-libiberty libiberty ; \
mv stage1-libiberty prev-libiberty || test -f stage1-lean
@endif libiberty
@if zlib
@cd $(HOST_SUBDIR); [ -d stage2-zlib ] || \
mkdir stage2-zlib; \
set stage2-zlib zlib ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-zlib prev-zlib ; \
@CREATE_LINK_TO_DIR@
mv stage2-zlib zlib ; \
mv stage1-zlib prev-zlib || test -f stage1-lean
@endif zlib
@[ -d stage2-$(TARGET_SUBDIR) ] || \
mkdir stage2-$(TARGET_SUBDIR); \
set stage2-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) ; \
@CREATE_LINK_TO_DIR@
mv stage2-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \
mv stage1-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stage1-lean
stage2-end::
@rm -f stage_current
@if bfd
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set bfd stage2-bfd ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-bfd stage1-bfd ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/bfd ; then \
cd $(HOST_SUBDIR); mv bfd stage2-bfd ; \
mv prev-bfd stage1-bfd ; : ; \
fi
@endif bfd
@if opcodes
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set opcodes stage2-opcodes ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-opcodes stage1-opcodes ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/opcodes ; then \
cd $(HOST_SUBDIR); mv opcodes stage2-opcodes ; \
mv prev-opcodes stage1-opcodes ; : ; \
fi
@endif opcodes
@if binutils
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set binutils stage2-binutils ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-binutils stage1-binutils ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/binutils ; then \
cd $(HOST_SUBDIR); mv binutils stage2-binutils ; \
mv prev-binutils stage1-binutils ; : ; \
fi
@endif binutils
@if gas
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set gas stage2-gas ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-gas stage1-gas ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/gas ; then \
cd $(HOST_SUBDIR); mv gas stage2-gas ; \
mv prev-gas stage1-gas ; : ; \
fi
@endif gas
@if gcc
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set gcc stage2-gcc ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-gcc stage1-gcc ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/gcc ; then \
cd $(HOST_SUBDIR); mv gcc stage2-gcc ; \
mv prev-gcc stage1-gcc ; : ; \
fi
@endif gcc
@if intl
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set intl stage2-intl ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-intl stage1-intl ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/intl ; then \
cd $(HOST_SUBDIR); mv intl stage2-intl ; \
mv prev-intl stage1-intl ; : ; \
fi
@endif intl
@if ld
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set ld stage2-ld ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-ld stage1-ld ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/ld ; then \
cd $(HOST_SUBDIR); mv ld stage2-ld ; \
mv prev-ld stage1-ld ; : ; \
fi
@endif ld
@if libcpp
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libcpp stage2-libcpp ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-libcpp stage1-libcpp ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libcpp ; then \
cd $(HOST_SUBDIR); mv libcpp stage2-libcpp ; \
mv prev-libcpp stage1-libcpp ; : ; \
fi
@endif libcpp
@if libdecnumber
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libdecnumber stage2-libdecnumber ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-libdecnumber stage1-libdecnumber ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libdecnumber ; then \
cd $(HOST_SUBDIR); mv libdecnumber stage2-libdecnumber ; \
mv prev-libdecnumber stage1-libdecnumber ; : ; \
fi
@endif libdecnumber
@if libiberty
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libiberty stage2-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-libiberty stage1-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libiberty ; then \
cd $(HOST_SUBDIR); mv libiberty stage2-libiberty ; \
mv prev-libiberty stage1-libiberty ; : ; \
fi
@endif libiberty
@if zlib
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set zlib stage2-zlib ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-zlib stage1-zlib ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/zlib ; then \
cd $(HOST_SUBDIR); mv zlib stage2-zlib ; \
mv prev-zlib stage1-zlib ; : ; \
fi
@endif zlib
@if test -d $(TARGET_SUBDIR) ; then \
set $(TARGET_SUBDIR) stage2-$(TARGET_SUBDIR) ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-$(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR) ; \
@UNDO_LINK_TO_DIR@ ; \
mv $(TARGET_SUBDIR) stage2-$(TARGET_SUBDIR) ; \
mv prev-$(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR) ; : ; \
fi
rm -f stage_current
# Bubble a bugfix through all the stages up to stage 2. They are
# remade, but not reconfigured. The next stage (if any) will not be
......@@ -36131,7 +36065,7 @@ do-clean: clean-stage2
.PHONY: bootstrap2
.PHONY: bootstrap2 bootstrap2-lean
bootstrap2:
echo stage2 > stage_final
@r=`${PWD_COMMAND}`; export r; \
......@@ -36142,6 +36076,16 @@ bootstrap2:
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
bootstrap2-lean:
echo stage2 > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) LEAN=: stage2-bubble
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stage1:: distclean-stage2
......@@ -36164,207 +36108,162 @@ stage3-start::
@if bfd
@cd $(HOST_SUBDIR); [ -d stage3-bfd ] || \
mkdir stage3-bfd; \
set stage3-bfd bfd ; \
@CREATE_LINK_TO_DIR@ ; \
set stage2-bfd prev-bfd ; \
@CREATE_LINK_TO_DIR@
mv stage3-bfd bfd ; \
mv stage2-bfd prev-bfd || test -f stage2-lean
@endif bfd
@if opcodes
@cd $(HOST_SUBDIR); [ -d stage3-opcodes ] || \
mkdir stage3-opcodes; \
set stage3-opcodes opcodes ; \
@CREATE_LINK_TO_DIR@ ; \
set stage2-opcodes prev-opcodes ; \
@CREATE_LINK_TO_DIR@
mv stage3-opcodes opcodes ; \
mv stage2-opcodes prev-opcodes || test -f stage2-lean
@endif opcodes
@if binutils
@cd $(HOST_SUBDIR); [ -d stage3-binutils ] || \
mkdir stage3-binutils; \
set stage3-binutils binutils ; \
@CREATE_LINK_TO_DIR@ ; \
set stage2-binutils prev-binutils ; \
@CREATE_LINK_TO_DIR@
mv stage3-binutils binutils ; \
mv stage2-binutils prev-binutils || test -f stage2-lean
@endif binutils
@if gas
@cd $(HOST_SUBDIR); [ -d stage3-gas ] || \
mkdir stage3-gas; \
set stage3-gas gas ; \
@CREATE_LINK_TO_DIR@ ; \
set stage2-gas prev-gas ; \
@CREATE_LINK_TO_DIR@
mv stage3-gas gas ; \
mv stage2-gas prev-gas || test -f stage2-lean
@endif gas
@if gcc
@cd $(HOST_SUBDIR); [ -d stage3-gcc ] || \
mkdir stage3-gcc; \
set stage3-gcc gcc ; \
@CREATE_LINK_TO_DIR@ ; \
set stage2-gcc prev-gcc ; \
@CREATE_LINK_TO_DIR@
mv stage3-gcc gcc ; \
mv stage2-gcc prev-gcc || test -f stage2-lean
@endif gcc
@if intl
@cd $(HOST_SUBDIR); [ -d stage3-intl ] || \
mkdir stage3-intl; \
set stage3-intl intl ; \
@CREATE_LINK_TO_DIR@ ; \
set stage2-intl prev-intl ; \
@CREATE_LINK_TO_DIR@
mv stage3-intl intl ; \
mv stage2-intl prev-intl || test -f stage2-lean
@endif intl
@if ld
@cd $(HOST_SUBDIR); [ -d stage3-ld ] || \
mkdir stage3-ld; \
set stage3-ld ld ; \
@CREATE_LINK_TO_DIR@ ; \
set stage2-ld prev-ld ; \
@CREATE_LINK_TO_DIR@
mv stage3-ld ld ; \
mv stage2-ld prev-ld || test -f stage2-lean
@endif ld
@if libcpp
@cd $(HOST_SUBDIR); [ -d stage3-libcpp ] || \
mkdir stage3-libcpp; \
set stage3-libcpp libcpp ; \
@CREATE_LINK_TO_DIR@ ; \
set stage2-libcpp prev-libcpp ; \
@CREATE_LINK_TO_DIR@
mv stage3-libcpp libcpp ; \
mv stage2-libcpp prev-libcpp || test -f stage2-lean
@endif libcpp
@if libdecnumber
@cd $(HOST_SUBDIR); [ -d stage3-libdecnumber ] || \
mkdir stage3-libdecnumber; \
set stage3-libdecnumber libdecnumber ; \
@CREATE_LINK_TO_DIR@ ; \
set stage2-libdecnumber prev-libdecnumber ; \
@CREATE_LINK_TO_DIR@
mv stage3-libdecnumber libdecnumber ; \
mv stage2-libdecnumber prev-libdecnumber || test -f stage2-lean
@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stage3-libiberty ] || \
mkdir stage3-libiberty; \
set stage3-libiberty libiberty ; \
@CREATE_LINK_TO_DIR@ ; \
set stage2-libiberty prev-libiberty ; \
@CREATE_LINK_TO_DIR@
mv stage3-libiberty libiberty ; \
mv stage2-libiberty prev-libiberty || test -f stage2-lean
@endif libiberty
@if zlib
@cd $(HOST_SUBDIR); [ -d stage3-zlib ] || \
mkdir stage3-zlib; \
set stage3-zlib zlib ; \
@CREATE_LINK_TO_DIR@ ; \
set stage2-zlib prev-zlib ; \
@CREATE_LINK_TO_DIR@
mv stage3-zlib zlib ; \
mv stage2-zlib prev-zlib || test -f stage2-lean
@endif zlib
@[ -d stage3-$(TARGET_SUBDIR) ] || \
mkdir stage3-$(TARGET_SUBDIR); \
set stage3-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \
@CREATE_LINK_TO_DIR@ ; \
set stage2-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) ; \
@CREATE_LINK_TO_DIR@
mv stage3-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \
mv stage2-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stage2-lean
stage3-end::
@rm -f stage_current
@if bfd
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set bfd stage3-bfd ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-bfd stage2-bfd ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/bfd ; then \
cd $(HOST_SUBDIR); mv bfd stage3-bfd ; \
mv prev-bfd stage2-bfd ; : ; \
fi
@endif bfd
@if opcodes
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set opcodes stage3-opcodes ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-opcodes stage2-opcodes ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/opcodes ; then \
cd $(HOST_SUBDIR); mv opcodes stage3-opcodes ; \
mv prev-opcodes stage2-opcodes ; : ; \
fi
@endif opcodes
@if binutils
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set binutils stage3-binutils ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-binutils stage2-binutils ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/binutils ; then \
cd $(HOST_SUBDIR); mv binutils stage3-binutils ; \
mv prev-binutils stage2-binutils ; : ; \
fi
@endif binutils
@if gas
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set gas stage3-gas ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-gas stage2-gas ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/gas ; then \
cd $(HOST_SUBDIR); mv gas stage3-gas ; \
mv prev-gas stage2-gas ; : ; \
fi
@endif gas
@if gcc
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set gcc stage3-gcc ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-gcc stage2-gcc ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/gcc ; then \
cd $(HOST_SUBDIR); mv gcc stage3-gcc ; \
mv prev-gcc stage2-gcc ; : ; \
fi
@endif gcc
@if intl
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set intl stage3-intl ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-intl stage2-intl ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/intl ; then \
cd $(HOST_SUBDIR); mv intl stage3-intl ; \
mv prev-intl stage2-intl ; : ; \
fi
@endif intl
@if ld
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set ld stage3-ld ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-ld stage2-ld ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/ld ; then \
cd $(HOST_SUBDIR); mv ld stage3-ld ; \
mv prev-ld stage2-ld ; : ; \
fi
@endif ld
@if libcpp
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libcpp stage3-libcpp ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-libcpp stage2-libcpp ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libcpp ; then \
cd $(HOST_SUBDIR); mv libcpp stage3-libcpp ; \
mv prev-libcpp stage2-libcpp ; : ; \
fi
@endif libcpp
@if libdecnumber
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libdecnumber stage3-libdecnumber ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-libdecnumber stage2-libdecnumber ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libdecnumber ; then \
cd $(HOST_SUBDIR); mv libdecnumber stage3-libdecnumber ; \
mv prev-libdecnumber stage2-libdecnumber ; : ; \
fi
@endif libdecnumber
@if libiberty
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libiberty stage3-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-libiberty stage2-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libiberty ; then \
cd $(HOST_SUBDIR); mv libiberty stage3-libiberty ; \
mv prev-libiberty stage2-libiberty ; : ; \
fi
@endif libiberty
@if zlib
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set zlib stage3-zlib ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-zlib stage2-zlib ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/zlib ; then \
cd $(HOST_SUBDIR); mv zlib stage3-zlib ; \
mv prev-zlib stage2-zlib ; : ; \
fi
@endif zlib
@if test -d $(TARGET_SUBDIR) ; then \
set $(TARGET_SUBDIR) stage3-$(TARGET_SUBDIR) ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-$(TARGET_SUBDIR) stage2-$(TARGET_SUBDIR) ; \
@UNDO_LINK_TO_DIR@ ; \
mv $(TARGET_SUBDIR) stage3-$(TARGET_SUBDIR) ; \
mv prev-$(TARGET_SUBDIR) stage2-$(TARGET_SUBDIR) ; : ; \
fi
rm -f stage_current
# Bubble a bugfix through all the stages up to stage 3. They are
# remade, but not reconfigured. The next stage (if any) will not be
# reconfigured as well.
.PHONY: stage3-bubble
stage3-bubble:: stage2-bubble
@bootstrap_lean@-rm -rf stage1-* ; $(STAMP) stage1-lean
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
if test -f stage3-lean || test -f stage2-lean ; then \
echo Skipping rebuild of stage3 ; \
else \
$(MAKE) stage3-start; \
if $(LEAN); then \
rm -rf stage1-* ; \
$(STAMP) stage1-lean ; \
fi; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage3; \
fi
$(MAKE) $(RECURSE_FLAGS_TO_PASS) compare
......@@ -36408,11 +36307,14 @@ compare:
true; \
fi ; \
$(STAMP) compare
@bootstrap_lean@-rm -rf stage2-* ; $(STAMP) stage2-lean
if $(LEAN); then \
rm -rf stage2-*; \
$(STAMP) stage2-lean; \
fi
.PHONY: bootstrap
.PHONY: bootstrap bootstrap-lean
bootstrap:
echo stage3 > stage_final
@r=`${PWD_COMMAND}`; export r; \
......@@ -36423,6 +36325,16 @@ bootstrap:
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
bootstrap-lean:
echo stage3 > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) LEAN=: stage3-bubble
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stage2:: distclean-stage3
......@@ -36448,207 +36360,162 @@ stage4-start::
@if bfd
@cd $(HOST_SUBDIR); [ -d stage4-bfd ] || \
mkdir stage4-bfd; \
set stage4-bfd bfd ; \
@CREATE_LINK_TO_DIR@ ; \
set stage3-bfd prev-bfd ; \
@CREATE_LINK_TO_DIR@
mv stage4-bfd bfd ; \
mv stage3-bfd prev-bfd || test -f stage3-lean
@endif bfd
@if opcodes
@cd $(HOST_SUBDIR); [ -d stage4-opcodes ] || \
mkdir stage4-opcodes; \
set stage4-opcodes opcodes ; \
@CREATE_LINK_TO_DIR@ ; \
set stage3-opcodes prev-opcodes ; \
@CREATE_LINK_TO_DIR@
mv stage4-opcodes opcodes ; \
mv stage3-opcodes prev-opcodes || test -f stage3-lean
@endif opcodes
@if binutils
@cd $(HOST_SUBDIR); [ -d stage4-binutils ] || \
mkdir stage4-binutils; \
set stage4-binutils binutils ; \
@CREATE_LINK_TO_DIR@ ; \
set stage3-binutils prev-binutils ; \
@CREATE_LINK_TO_DIR@
mv stage4-binutils binutils ; \
mv stage3-binutils prev-binutils || test -f stage3-lean
@endif binutils
@if gas
@cd $(HOST_SUBDIR); [ -d stage4-gas ] || \
mkdir stage4-gas; \
set stage4-gas gas ; \
@CREATE_LINK_TO_DIR@ ; \
set stage3-gas prev-gas ; \
@CREATE_LINK_TO_DIR@
mv stage4-gas gas ; \
mv stage3-gas prev-gas || test -f stage3-lean
@endif gas
@if gcc
@cd $(HOST_SUBDIR); [ -d stage4-gcc ] || \
mkdir stage4-gcc; \
set stage4-gcc gcc ; \
@CREATE_LINK_TO_DIR@ ; \
set stage3-gcc prev-gcc ; \
@CREATE_LINK_TO_DIR@
mv stage4-gcc gcc ; \
mv stage3-gcc prev-gcc || test -f stage3-lean
@endif gcc
@if intl
@cd $(HOST_SUBDIR); [ -d stage4-intl ] || \
mkdir stage4-intl; \
set stage4-intl intl ; \
@CREATE_LINK_TO_DIR@ ; \
set stage3-intl prev-intl ; \
@CREATE_LINK_TO_DIR@
mv stage4-intl intl ; \
mv stage3-intl prev-intl || test -f stage3-lean
@endif intl
@if ld
@cd $(HOST_SUBDIR); [ -d stage4-ld ] || \
mkdir stage4-ld; \
set stage4-ld ld ; \
@CREATE_LINK_TO_DIR@ ; \
set stage3-ld prev-ld ; \
@CREATE_LINK_TO_DIR@
mv stage4-ld ld ; \
mv stage3-ld prev-ld || test -f stage3-lean
@endif ld
@if libcpp
@cd $(HOST_SUBDIR); [ -d stage4-libcpp ] || \
mkdir stage4-libcpp; \
set stage4-libcpp libcpp ; \
@CREATE_LINK_TO_DIR@ ; \
set stage3-libcpp prev-libcpp ; \
@CREATE_LINK_TO_DIR@
mv stage4-libcpp libcpp ; \
mv stage3-libcpp prev-libcpp || test -f stage3-lean
@endif libcpp
@if libdecnumber
@cd $(HOST_SUBDIR); [ -d stage4-libdecnumber ] || \
mkdir stage4-libdecnumber; \
set stage4-libdecnumber libdecnumber ; \
@CREATE_LINK_TO_DIR@ ; \
set stage3-libdecnumber prev-libdecnumber ; \
@CREATE_LINK_TO_DIR@
mv stage4-libdecnumber libdecnumber ; \
mv stage3-libdecnumber prev-libdecnumber || test -f stage3-lean
@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stage4-libiberty ] || \
mkdir stage4-libiberty; \
set stage4-libiberty libiberty ; \
@CREATE_LINK_TO_DIR@ ; \
set stage3-libiberty prev-libiberty ; \
@CREATE_LINK_TO_DIR@
mv stage4-libiberty libiberty ; \
mv stage3-libiberty prev-libiberty || test -f stage3-lean
@endif libiberty
@if zlib
@cd $(HOST_SUBDIR); [ -d stage4-zlib ] || \
mkdir stage4-zlib; \
set stage4-zlib zlib ; \
@CREATE_LINK_TO_DIR@ ; \
set stage3-zlib prev-zlib ; \
@CREATE_LINK_TO_DIR@
mv stage4-zlib zlib ; \
mv stage3-zlib prev-zlib || test -f stage3-lean
@endif zlib
@[ -d stage4-$(TARGET_SUBDIR) ] || \
mkdir stage4-$(TARGET_SUBDIR); \
set stage4-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \
@CREATE_LINK_TO_DIR@ ; \
set stage3-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) ; \
@CREATE_LINK_TO_DIR@
mv stage4-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \
mv stage3-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stage3-lean
stage4-end::
@rm -f stage_current
@if bfd
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set bfd stage4-bfd ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-bfd stage3-bfd ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/bfd ; then \
cd $(HOST_SUBDIR); mv bfd stage4-bfd ; \
mv prev-bfd stage3-bfd ; : ; \
fi
@endif bfd
@if opcodes
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set opcodes stage4-opcodes ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-opcodes stage3-opcodes ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/opcodes ; then \
cd $(HOST_SUBDIR); mv opcodes stage4-opcodes ; \
mv prev-opcodes stage3-opcodes ; : ; \
fi
@endif opcodes
@if binutils
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set binutils stage4-binutils ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-binutils stage3-binutils ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/binutils ; then \
cd $(HOST_SUBDIR); mv binutils stage4-binutils ; \
mv prev-binutils stage3-binutils ; : ; \
fi
@endif binutils
@if gas
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set gas stage4-gas ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-gas stage3-gas ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/gas ; then \
cd $(HOST_SUBDIR); mv gas stage4-gas ; \
mv prev-gas stage3-gas ; : ; \
fi
@endif gas
@if gcc
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set gcc stage4-gcc ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-gcc stage3-gcc ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/gcc ; then \
cd $(HOST_SUBDIR); mv gcc stage4-gcc ; \
mv prev-gcc stage3-gcc ; : ; \
fi
@endif gcc
@if intl
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set intl stage4-intl ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-intl stage3-intl ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/intl ; then \
cd $(HOST_SUBDIR); mv intl stage4-intl ; \
mv prev-intl stage3-intl ; : ; \
fi
@endif intl
@if ld
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set ld stage4-ld ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-ld stage3-ld ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/ld ; then \
cd $(HOST_SUBDIR); mv ld stage4-ld ; \
mv prev-ld stage3-ld ; : ; \
fi
@endif ld
@if libcpp
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libcpp stage4-libcpp ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-libcpp stage3-libcpp ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libcpp ; then \
cd $(HOST_SUBDIR); mv libcpp stage4-libcpp ; \
mv prev-libcpp stage3-libcpp ; : ; \
fi
@endif libcpp
@if libdecnumber
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libdecnumber stage4-libdecnumber ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-libdecnumber stage3-libdecnumber ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libdecnumber ; then \
cd $(HOST_SUBDIR); mv libdecnumber stage4-libdecnumber ; \
mv prev-libdecnumber stage3-libdecnumber ; : ; \
fi
@endif libdecnumber
@if libiberty
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libiberty stage4-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-libiberty stage3-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libiberty ; then \
cd $(HOST_SUBDIR); mv libiberty stage4-libiberty ; \
mv prev-libiberty stage3-libiberty ; : ; \
fi
@endif libiberty
@if zlib
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set zlib stage4-zlib ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-zlib stage3-zlib ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/zlib ; then \
cd $(HOST_SUBDIR); mv zlib stage4-zlib ; \
mv prev-zlib stage3-zlib ; : ; \
fi
@endif zlib
@if test -d $(TARGET_SUBDIR) ; then \
set $(TARGET_SUBDIR) stage4-$(TARGET_SUBDIR) ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-$(TARGET_SUBDIR) stage3-$(TARGET_SUBDIR) ; \
@UNDO_LINK_TO_DIR@ ; \
mv $(TARGET_SUBDIR) stage4-$(TARGET_SUBDIR) ; \
mv prev-$(TARGET_SUBDIR) stage3-$(TARGET_SUBDIR) ; : ; \
fi
rm -f stage_current
# Bubble a bugfix through all the stages up to stage 4. They are
# remade, but not reconfigured. The next stage (if any) will not be
# reconfigured as well.
.PHONY: stage4-bubble
stage4-bubble:: stage3-bubble
@bootstrap_lean@-rm -rf stage2-* ; $(STAMP) stage2-lean
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
if test -f stage4-lean || test -f stage3-lean ; then \
echo Skipping rebuild of stage4 ; \
else \
$(MAKE) stage4-start; \
if $(LEAN); then \
rm -rf stage2-* ; \
$(STAMP) stage2-lean ; \
fi; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage4; \
fi
$(MAKE) $(RECURSE_FLAGS_TO_PASS) compare3
......@@ -36692,11 +36559,14 @@ compare3:
true; \
fi ; \
$(STAMP) compare3
@bootstrap_lean@-rm -rf stage3-* ; $(STAMP) stage3-lean
if $(LEAN); then \
rm -rf stage3-*; \
$(STAMP) stage3-lean; \
fi
.PHONY: bootstrap4
.PHONY: bootstrap4 bootstrap4-lean
bootstrap4:
echo stage4 > stage_final
@r=`${PWD_COMMAND}`; export r; \
......@@ -36707,6 +36577,16 @@ bootstrap4:
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
bootstrap4-lean:
echo stage4 > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) LEAN=: stage4-bubble
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stage3:: distclean-stage4
......@@ -36729,194 +36609,146 @@ stageprofile-start::
@if bfd
@cd $(HOST_SUBDIR); [ -d stageprofile-bfd ] || \
mkdir stageprofile-bfd; \
set stageprofile-bfd bfd ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-bfd prev-bfd ; \
@CREATE_LINK_TO_DIR@
mv stageprofile-bfd bfd ; \
mv stage1-bfd prev-bfd || test -f stage1-lean
@endif bfd
@if opcodes
@cd $(HOST_SUBDIR); [ -d stageprofile-opcodes ] || \
mkdir stageprofile-opcodes; \
set stageprofile-opcodes opcodes ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-opcodes prev-opcodes ; \
@CREATE_LINK_TO_DIR@
mv stageprofile-opcodes opcodes ; \
mv stage1-opcodes prev-opcodes || test -f stage1-lean
@endif opcodes
@if binutils
@cd $(HOST_SUBDIR); [ -d stageprofile-binutils ] || \
mkdir stageprofile-binutils; \
set stageprofile-binutils binutils ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-binutils prev-binutils ; \
@CREATE_LINK_TO_DIR@
mv stageprofile-binutils binutils ; \
mv stage1-binutils prev-binutils || test -f stage1-lean
@endif binutils
@if gas
@cd $(HOST_SUBDIR); [ -d stageprofile-gas ] || \
mkdir stageprofile-gas; \
set stageprofile-gas gas ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-gas prev-gas ; \
@CREATE_LINK_TO_DIR@
mv stageprofile-gas gas ; \
mv stage1-gas prev-gas || test -f stage1-lean
@endif gas
@if gcc
@cd $(HOST_SUBDIR); [ -d stageprofile-gcc ] || \
mkdir stageprofile-gcc; \
set stageprofile-gcc gcc ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-gcc prev-gcc ; \
@CREATE_LINK_TO_DIR@
mv stageprofile-gcc gcc ; \
mv stage1-gcc prev-gcc || test -f stage1-lean
@endif gcc
@if intl
@cd $(HOST_SUBDIR); [ -d stageprofile-intl ] || \
mkdir stageprofile-intl; \
set stageprofile-intl intl ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-intl prev-intl ; \
@CREATE_LINK_TO_DIR@
mv stageprofile-intl intl ; \
mv stage1-intl prev-intl || test -f stage1-lean
@endif intl
@if ld
@cd $(HOST_SUBDIR); [ -d stageprofile-ld ] || \
mkdir stageprofile-ld; \
set stageprofile-ld ld ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-ld prev-ld ; \
@CREATE_LINK_TO_DIR@
mv stageprofile-ld ld ; \
mv stage1-ld prev-ld || test -f stage1-lean
@endif ld
@if libcpp
@cd $(HOST_SUBDIR); [ -d stageprofile-libcpp ] || \
mkdir stageprofile-libcpp; \
set stageprofile-libcpp libcpp ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-libcpp prev-libcpp ; \
@CREATE_LINK_TO_DIR@
mv stageprofile-libcpp libcpp ; \
mv stage1-libcpp prev-libcpp || test -f stage1-lean
@endif libcpp
@if libdecnumber
@cd $(HOST_SUBDIR); [ -d stageprofile-libdecnumber ] || \
mkdir stageprofile-libdecnumber; \
set stageprofile-libdecnumber libdecnumber ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-libdecnumber prev-libdecnumber ; \
@CREATE_LINK_TO_DIR@
mv stageprofile-libdecnumber libdecnumber ; \
mv stage1-libdecnumber prev-libdecnumber || test -f stage1-lean
@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stageprofile-libiberty ] || \
mkdir stageprofile-libiberty; \
set stageprofile-libiberty libiberty ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-libiberty prev-libiberty ; \
@CREATE_LINK_TO_DIR@
mv stageprofile-libiberty libiberty ; \
mv stage1-libiberty prev-libiberty || test -f stage1-lean
@endif libiberty
@if zlib
@cd $(HOST_SUBDIR); [ -d stageprofile-zlib ] || \
mkdir stageprofile-zlib; \
set stageprofile-zlib zlib ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-zlib prev-zlib ; \
@CREATE_LINK_TO_DIR@
mv stageprofile-zlib zlib ; \
mv stage1-zlib prev-zlib || test -f stage1-lean
@endif zlib
@[ -d stageprofile-$(TARGET_SUBDIR) ] || \
mkdir stageprofile-$(TARGET_SUBDIR); \
set stageprofile-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \
@CREATE_LINK_TO_DIR@ ; \
set stage1-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) ; \
@CREATE_LINK_TO_DIR@
mv stageprofile-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \
mv stage1-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stage1-lean
stageprofile-end::
@rm -f stage_current
@if bfd
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set bfd stageprofile-bfd ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-bfd stage1-bfd ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/bfd ; then \
cd $(HOST_SUBDIR); mv bfd stageprofile-bfd ; \
mv prev-bfd stage1-bfd ; : ; \
fi
@endif bfd
@if opcodes
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set opcodes stageprofile-opcodes ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-opcodes stage1-opcodes ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/opcodes ; then \
cd $(HOST_SUBDIR); mv opcodes stageprofile-opcodes ; \
mv prev-opcodes stage1-opcodes ; : ; \
fi
@endif opcodes
@if binutils
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set binutils stageprofile-binutils ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-binutils stage1-binutils ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/binutils ; then \
cd $(HOST_SUBDIR); mv binutils stageprofile-binutils ; \
mv prev-binutils stage1-binutils ; : ; \
fi
@endif binutils
@if gas
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set gas stageprofile-gas ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-gas stage1-gas ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/gas ; then \
cd $(HOST_SUBDIR); mv gas stageprofile-gas ; \
mv prev-gas stage1-gas ; : ; \
fi
@endif gas
@if gcc
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set gcc stageprofile-gcc ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-gcc stage1-gcc ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/gcc ; then \
cd $(HOST_SUBDIR); mv gcc stageprofile-gcc ; \
mv prev-gcc stage1-gcc ; : ; \
fi
@endif gcc
@if intl
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set intl stageprofile-intl ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-intl stage1-intl ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/intl ; then \
cd $(HOST_SUBDIR); mv intl stageprofile-intl ; \
mv prev-intl stage1-intl ; : ; \
fi
@endif intl
@if ld
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set ld stageprofile-ld ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-ld stage1-ld ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/ld ; then \
cd $(HOST_SUBDIR); mv ld stageprofile-ld ; \
mv prev-ld stage1-ld ; : ; \
fi
@endif ld
@if libcpp
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libcpp stageprofile-libcpp ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-libcpp stage1-libcpp ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libcpp ; then \
cd $(HOST_SUBDIR); mv libcpp stageprofile-libcpp ; \
mv prev-libcpp stage1-libcpp ; : ; \
fi
@endif libcpp
@if libdecnumber
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libdecnumber stageprofile-libdecnumber ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-libdecnumber stage1-libdecnumber ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libdecnumber ; then \
cd $(HOST_SUBDIR); mv libdecnumber stageprofile-libdecnumber ; \
mv prev-libdecnumber stage1-libdecnumber ; : ; \
fi
@endif libdecnumber
@if libiberty
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libiberty stageprofile-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-libiberty stage1-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libiberty ; then \
cd $(HOST_SUBDIR); mv libiberty stageprofile-libiberty ; \
mv prev-libiberty stage1-libiberty ; : ; \
fi
@endif libiberty
@if zlib
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set zlib stageprofile-zlib ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-zlib stage1-zlib ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/zlib ; then \
cd $(HOST_SUBDIR); mv zlib stageprofile-zlib ; \
mv prev-zlib stage1-zlib ; : ; \
fi
@endif zlib
@if test -d $(TARGET_SUBDIR) ; then \
set $(TARGET_SUBDIR) stageprofile-$(TARGET_SUBDIR) ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-$(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR) ; \
@UNDO_LINK_TO_DIR@ ; \
mv $(TARGET_SUBDIR) stageprofile-$(TARGET_SUBDIR) ; \
mv prev-$(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR) ; : ; \
fi
rm -f stage_current
# Bubble a bugfix through all the stages up to stage profile. They are
# remade, but not reconfigured. The next stage (if any) will not be
......@@ -36963,194 +36795,146 @@ stagefeedback-start::
@if bfd
@cd $(HOST_SUBDIR); [ -d stagefeedback-bfd ] || \
mkdir stagefeedback-bfd; \
set stagefeedback-bfd bfd ; \
@CREATE_LINK_TO_DIR@ ; \
set stageprofile-bfd prev-bfd ; \
@CREATE_LINK_TO_DIR@
mv stagefeedback-bfd bfd ; \
mv stageprofile-bfd prev-bfd || test -f stageprofile-lean
@endif bfd
@if opcodes
@cd $(HOST_SUBDIR); [ -d stagefeedback-opcodes ] || \
mkdir stagefeedback-opcodes; \
set stagefeedback-opcodes opcodes ; \
@CREATE_LINK_TO_DIR@ ; \
set stageprofile-opcodes prev-opcodes ; \
@CREATE_LINK_TO_DIR@
mv stagefeedback-opcodes opcodes ; \
mv stageprofile-opcodes prev-opcodes || test -f stageprofile-lean
@endif opcodes
@if binutils
@cd $(HOST_SUBDIR); [ -d stagefeedback-binutils ] || \
mkdir stagefeedback-binutils; \
set stagefeedback-binutils binutils ; \
@CREATE_LINK_TO_DIR@ ; \
set stageprofile-binutils prev-binutils ; \
@CREATE_LINK_TO_DIR@
mv stagefeedback-binutils binutils ; \
mv stageprofile-binutils prev-binutils || test -f stageprofile-lean
@endif binutils
@if gas
@cd $(HOST_SUBDIR); [ -d stagefeedback-gas ] || \
mkdir stagefeedback-gas; \
set stagefeedback-gas gas ; \
@CREATE_LINK_TO_DIR@ ; \
set stageprofile-gas prev-gas ; \
@CREATE_LINK_TO_DIR@
mv stagefeedback-gas gas ; \
mv stageprofile-gas prev-gas || test -f stageprofile-lean
@endif gas
@if gcc
@cd $(HOST_SUBDIR); [ -d stagefeedback-gcc ] || \
mkdir stagefeedback-gcc; \
set stagefeedback-gcc gcc ; \
@CREATE_LINK_TO_DIR@ ; \
set stageprofile-gcc prev-gcc ; \
@CREATE_LINK_TO_DIR@
mv stagefeedback-gcc gcc ; \
mv stageprofile-gcc prev-gcc || test -f stageprofile-lean
@endif gcc
@if intl
@cd $(HOST_SUBDIR); [ -d stagefeedback-intl ] || \
mkdir stagefeedback-intl; \
set stagefeedback-intl intl ; \
@CREATE_LINK_TO_DIR@ ; \
set stageprofile-intl prev-intl ; \
@CREATE_LINK_TO_DIR@
mv stagefeedback-intl intl ; \
mv stageprofile-intl prev-intl || test -f stageprofile-lean
@endif intl
@if ld
@cd $(HOST_SUBDIR); [ -d stagefeedback-ld ] || \
mkdir stagefeedback-ld; \
set stagefeedback-ld ld ; \
@CREATE_LINK_TO_DIR@ ; \
set stageprofile-ld prev-ld ; \
@CREATE_LINK_TO_DIR@
mv stagefeedback-ld ld ; \
mv stageprofile-ld prev-ld || test -f stageprofile-lean
@endif ld
@if libcpp
@cd $(HOST_SUBDIR); [ -d stagefeedback-libcpp ] || \
mkdir stagefeedback-libcpp; \
set stagefeedback-libcpp libcpp ; \
@CREATE_LINK_TO_DIR@ ; \
set stageprofile-libcpp prev-libcpp ; \
@CREATE_LINK_TO_DIR@
mv stagefeedback-libcpp libcpp ; \
mv stageprofile-libcpp prev-libcpp || test -f stageprofile-lean
@endif libcpp
@if libdecnumber
@cd $(HOST_SUBDIR); [ -d stagefeedback-libdecnumber ] || \
mkdir stagefeedback-libdecnumber; \
set stagefeedback-libdecnumber libdecnumber ; \
@CREATE_LINK_TO_DIR@ ; \
set stageprofile-libdecnumber prev-libdecnumber ; \
@CREATE_LINK_TO_DIR@
mv stagefeedback-libdecnumber libdecnumber ; \
mv stageprofile-libdecnumber prev-libdecnumber || test -f stageprofile-lean
@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stagefeedback-libiberty ] || \
mkdir stagefeedback-libiberty; \
set stagefeedback-libiberty libiberty ; \
@CREATE_LINK_TO_DIR@ ; \
set stageprofile-libiberty prev-libiberty ; \
@CREATE_LINK_TO_DIR@
mv stagefeedback-libiberty libiberty ; \
mv stageprofile-libiberty prev-libiberty || test -f stageprofile-lean
@endif libiberty
@if zlib
@cd $(HOST_SUBDIR); [ -d stagefeedback-zlib ] || \
mkdir stagefeedback-zlib; \
set stagefeedback-zlib zlib ; \
@CREATE_LINK_TO_DIR@ ; \
set stageprofile-zlib prev-zlib ; \
@CREATE_LINK_TO_DIR@
mv stagefeedback-zlib zlib ; \
mv stageprofile-zlib prev-zlib || test -f stageprofile-lean
@endif zlib
@[ -d stagefeedback-$(TARGET_SUBDIR) ] || \
mkdir stagefeedback-$(TARGET_SUBDIR); \
set stagefeedback-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \
@CREATE_LINK_TO_DIR@ ; \
set stageprofile-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) ; \
@CREATE_LINK_TO_DIR@
mv stagefeedback-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \
mv stageprofile-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stageprofile-lean
stagefeedback-end::
@rm -f stage_current
@if bfd
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set bfd stagefeedback-bfd ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-bfd stageprofile-bfd ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/bfd ; then \
cd $(HOST_SUBDIR); mv bfd stagefeedback-bfd ; \
mv prev-bfd stageprofile-bfd ; : ; \
fi
@endif bfd
@if opcodes
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set opcodes stagefeedback-opcodes ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-opcodes stageprofile-opcodes ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/opcodes ; then \
cd $(HOST_SUBDIR); mv opcodes stagefeedback-opcodes ; \
mv prev-opcodes stageprofile-opcodes ; : ; \
fi
@endif opcodes
@if binutils
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set binutils stagefeedback-binutils ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-binutils stageprofile-binutils ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/binutils ; then \
cd $(HOST_SUBDIR); mv binutils stagefeedback-binutils ; \
mv prev-binutils stageprofile-binutils ; : ; \
fi
@endif binutils
@if gas
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set gas stagefeedback-gas ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-gas stageprofile-gas ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/gas ; then \
cd $(HOST_SUBDIR); mv gas stagefeedback-gas ; \
mv prev-gas stageprofile-gas ; : ; \
fi
@endif gas
@if gcc
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set gcc stagefeedback-gcc ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-gcc stageprofile-gcc ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/gcc ; then \
cd $(HOST_SUBDIR); mv gcc stagefeedback-gcc ; \
mv prev-gcc stageprofile-gcc ; : ; \
fi
@endif gcc
@if intl
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set intl stagefeedback-intl ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-intl stageprofile-intl ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/intl ; then \
cd $(HOST_SUBDIR); mv intl stagefeedback-intl ; \
mv prev-intl stageprofile-intl ; : ; \
fi
@endif intl
@if ld
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set ld stagefeedback-ld ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-ld stageprofile-ld ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/ld ; then \
cd $(HOST_SUBDIR); mv ld stagefeedback-ld ; \
mv prev-ld stageprofile-ld ; : ; \
fi
@endif ld
@if libcpp
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libcpp stagefeedback-libcpp ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-libcpp stageprofile-libcpp ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libcpp ; then \
cd $(HOST_SUBDIR); mv libcpp stagefeedback-libcpp ; \
mv prev-libcpp stageprofile-libcpp ; : ; \
fi
@endif libcpp
@if libdecnumber
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libdecnumber stagefeedback-libdecnumber ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-libdecnumber stageprofile-libdecnumber ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libdecnumber ; then \
cd $(HOST_SUBDIR); mv libdecnumber stagefeedback-libdecnumber ; \
mv prev-libdecnumber stageprofile-libdecnumber ; : ; \
fi
@endif libdecnumber
@if libiberty
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set libiberty stagefeedback-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-libiberty stageprofile-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/libiberty ; then \
cd $(HOST_SUBDIR); mv libiberty stagefeedback-libiberty ; \
mv prev-libiberty stageprofile-libiberty ; : ; \
fi
@endif libiberty
@if zlib
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set zlib stagefeedback-zlib ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-zlib stageprofile-zlib ; \
@UNDO_LINK_TO_DIR@ ; \
@if test -d $(HOST_SUBDIR)/zlib ; then \
cd $(HOST_SUBDIR); mv zlib stagefeedback-zlib ; \
mv prev-zlib stageprofile-zlib ; : ; \
fi
@endif zlib
@if test -d $(TARGET_SUBDIR) ; then \
set $(TARGET_SUBDIR) stagefeedback-$(TARGET_SUBDIR) ; \
@UNDO_LINK_TO_DIR@ ; \
set prev-$(TARGET_SUBDIR) stageprofile-$(TARGET_SUBDIR) ; \
@UNDO_LINK_TO_DIR@ ; \
mv $(TARGET_SUBDIR) stagefeedback-$(TARGET_SUBDIR) ; \
mv prev-$(TARGET_SUBDIR) stageprofile-$(TARGET_SUBDIR) ; : ; \
fi
rm -f stage_current
# Bubble a bugfix through all the stages up to stage feedback. They are
# remade, but not reconfigured. The next stage (if any) will not be
......@@ -37175,7 +36959,7 @@ do-clean: clean-stagefeedback
.PHONY: profiledbootstrap
.PHONY: profiledbootstrap profiledbootstrap-lean
profiledbootstrap:
echo stagefeedback > stage_final
@r=`${PWD_COMMAND}`; export r; \
......@@ -37186,6 +36970,16 @@ profiledbootstrap:
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
profiledbootstrap-lean:
echo stagefeedback > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) LEAN=: stagefeedback-bubble
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stageprofile:: distclean-stagefeedback
Makefile.tpl
......@@ -6,7 +6,7 @@ in
#
# Makefile for directory with subdirs to build.
# Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
# 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation
# 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
......@@ -285,6 +285,7 @@ DLLTOOL = @DLLTOOL@
LD = @LD@
LIPO = @LIPO@
NM = @NM@
OBJDUMP = @OBJDUMP@
RANLIB = @RANLIB@
STRIP = @STRIP@
WINDRES = @WINDRES@
......@@ -407,6 +408,7 @@ EXTRA_HOST_FLAGS = \
'LD=$(LD)' \
'LIPO=$(LIPO)' \
'NM=$(NM)' \
'OBJDUMP=$(OBJDUMP)' \
'RANLIB=$(RANLIB)' \
'STRIP=$(STRIP)' \
'WINDRES=$(WINDRES)'
......@@ -464,8 +466,6 @@ EXTRA_GCC_FLAGS = \
"`echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
"`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
"`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
"`echo 'STAGE1_CFLAGS=$(STAGE1_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
"`echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
"`echo 'BOOT_ADAFLAGS=$(BOOT_ADAFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`"
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) $(EXTRA_GCC_FLAGS)
......@@ -1222,6 +1222,9 @@ unstage:
stage:
@: $(MAKE); $(stage)
# Disable commands for lean bootstrap.
LEAN = false
# We name the build directories for the various stages "stage1-gcc",
# "stage2-gcc","stage3-gcc", etc.
......@@ -1277,48 +1280,43 @@ stage[+id+]-start::
@if [+ module +]
@cd $(HOST_SUBDIR); [ -d stage[+id+]-[+module+] ] || \
mkdir stage[+id+]-[+module+]; \
set stage[+id+]-[+module+] [+module+] ; \
@CREATE_LINK_TO_DIR@ [+ IF prev +] ; \
set stage[+prev+]-[+module+] prev-[+module+] ; \
@CREATE_LINK_TO_DIR@ [+ ENDIF prev +]
mv stage[+id+]-[+module+] [+module+] [+ IF prev +] ; \
mv stage[+prev+]-[+module+] prev-[+module+] || test -f stage[+prev+]-lean [+ ENDIF prev +]
@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +]
@[ -d stage[+id+]-$(TARGET_SUBDIR) ] || \
mkdir stage[+id+]-$(TARGET_SUBDIR); \
set stage[+id+]-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \
@CREATE_LINK_TO_DIR@ [+ IF prev +] ; \
set stage[+prev+]-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) ; \
@CREATE_LINK_TO_DIR@ [+ ENDIF prev +]
mv stage[+id+]-$(TARGET_SUBDIR) $(TARGET_SUBDIR) [+ IF prev +] ; \
mv stage[+prev+]-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stage[+prev+]-lean [+ ENDIF prev +]
stage[+id+]-end::
@rm -f stage_current[+ FOR host_modules +][+ IF bootstrap +]
stage[+id+]-end:: [+ FOR host_modules +][+ IF bootstrap +]
@if [+ module +]
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set [+module+] stage[+id+]-[+module+] ; \
@UNDO_LINK_TO_DIR@ [+ IF prev +] ; \
set prev-[+module+] stage[+prev+]-[+module+] ; \
@UNDO_LINK_TO_DIR@ [+ ENDIF prev +] ; \
@if test -d $(HOST_SUBDIR)/[+module+] ; then \
cd $(HOST_SUBDIR); mv [+module+] stage[+id+]-[+module+] [+ IF prev +]; \
mv prev-[+module+] stage[+prev+]-[+module+] ; : [+ ENDIF prev +] ; \
fi
@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +]
@if test -d $(TARGET_SUBDIR) ; then \
set $(TARGET_SUBDIR) stage[+id+]-$(TARGET_SUBDIR) ; \
@UNDO_LINK_TO_DIR@ [+ IF prev +] ; \
set prev-$(TARGET_SUBDIR) stage[+prev+]-$(TARGET_SUBDIR) ; \
@UNDO_LINK_TO_DIR@ [+ ENDIF prev +] ; \
mv $(TARGET_SUBDIR) stage[+id+]-$(TARGET_SUBDIR) [+ IF prev +] ; \
mv prev-$(TARGET_SUBDIR) stage[+prev+]-$(TARGET_SUBDIR) ; : [+ ENDIF prev +] ; \
fi
rm -f stage_current
# Bubble a bugfix through all the stages up to stage [+id+]. They are
# remade, but not reconfigured. The next stage (if any) will not be
# reconfigured as well.
.PHONY: stage[+id+]-bubble
stage[+id+]-bubble:: [+ IF prev +]stage[+prev+]-bubble[+ ENDIF +][+IF lean +]
@bootstrap_lean@-rm -rf stage[+lean+]-* ; $(STAMP) stage[+lean+]-lean[+ ENDIF lean +]
stage[+id+]-bubble:: [+ IF prev +]stage[+prev+]-bubble[+ ENDIF +]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
if test -f stage[+id+]-lean [+
IF prev +]|| test -f stage[+prev+]-lean [+ ENDIF prev +] ; then \
echo Skipping rebuild of stage[+id+] ; \
else \
$(MAKE) stage[+id+]-start; \
$(MAKE) stage[+id+]-start; \[+IF lean +]
if $(LEAN); then \
rm -rf stage[+lean+]-* ; \
$(STAMP) stage[+lean+]-lean ; \
fi; \[+ ENDIF lean +]
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage[+id+]; \
fi[+ IF compare-target +]
$(MAKE) $(RECURSE_FLAGS_TO_PASS) [+compare-target+][+ ENDIF compare-target +]
......@@ -1362,11 +1360,14 @@ do-clean: clean-stage[+id+]
true; \
fi ; \
$(STAMP) [+compare-target+][+ IF prev +]
@bootstrap_lean@-rm -rf stage[+prev+]-* ; $(STAMP) stage[+prev+]-lean[+ ENDIF prev +]
if $(LEAN); then \
rm -rf stage[+prev+]-*; \
$(STAMP) stage[+prev+]-lean; \
fi[+ ENDIF prev +]
[+ ENDIF compare-target +]
[+ IF bootstrap-target +]
.PHONY: [+bootstrap-target+]
.PHONY: [+bootstrap-target+] [+bootstrap-target+]-lean
[+bootstrap-target+]:
echo stage[+id+] > stage_final
@r=`${PWD_COMMAND}`; export r; \
......@@ -1376,6 +1377,16 @@ do-clean: clean-stage[+id+]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
[+bootstrap-target+]-lean:
echo stage[+id+] > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) LEAN=: stage[+id+]-bubble
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
[+ ENDIF bootstrap-target +]
# Rules to wipe a stage and all the following ones, also used for cleanstrap
......
configure
......@@ -27,7 +27,7 @@ ac_help="$ac_help
--with-build-sysroot=sysroot
use sysroot as the system root during the build"
ac_help="$ac_help
--enable-bootstrap[=lean] Enable bootstrapping [no]"
--enable-bootstrap Enable bootstrapping [yes if native build]"
ac_help="$ac_help
--enable-serial-[{host,target,build}-]configure
Force sequential configuration of
......@@ -2967,17 +2967,17 @@ case "$have_compiler:$host:$target:$enable_bootstrap" in
enable_bootstrap=no ;;
# We have a compiler and we are in a native configuration, bootstrap is ok
yes:$build:$build:yes | yes:$build:$build:lean)
yes:$build:$build:yes)
;;
# Other configurations, but we have a compiler. Assume the user knows
# what he's doing.
yes:*:*:yes | yes:*:*:lean)
yes:*:*:yes)
echo "configure: warning: trying to bootstrap a cross compiler" 1>&2
;;
# No compiler: if they passed --enable-bootstrap explicitly, fail
no:*:*:yes | no:*:*:lean)
no:*:*:yes)
{ echo "configure: error: cannot bootstrap without a compiler" 1>&2; exit 1; } ;;
# Fail if wrong command line
......@@ -2989,16 +2989,11 @@ esac
# Adjust the toplevel makefile according to whether bootstrap was selected.
case "$enable_bootstrap" in
yes)
bootstrap_lean='#'
bootstrap_suffix=bootstrap ;;
lean)
bootstrap_lean=''
bootstrap_suffix=bootstrap ;;
no)
bootstrap_suffix=no-bootstrap ;;
esac
for module in ${build_configdirs} ; do
if test -z "${no_recursion}" \
&& test -f ${build_subdir}/${module}/Makefile; then
......@@ -3317,7 +3312,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3318: checking for $ac_word" >&5
echo "configure:3316: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3357,7 +3352,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3358: checking for $ac_word" >&5
echo "configure:3356: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3396,7 +3391,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3397: checking for $ac_word" >&5
echo "configure:3395: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3435,7 +3430,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3436: checking for $ac_word" >&5
echo "configure:3434: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3475,7 +3470,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3476: checking for $ac_word" >&5
echo "configure:3474: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3514,7 +3509,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3515: checking for $ac_word" >&5
echo "configure:3513: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3567,7 +3562,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3568: checking for $ac_word" >&5
echo "configure:3566: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3608,7 +3603,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3609: checking for $ac_word" >&5
echo "configure:3607: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3656,7 +3651,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3657: checking for $ac_word" >&5
echo "configure:3655: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3687,7 +3682,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3688: checking for $ac_word" >&5
echo "configure:3686: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3731,7 +3726,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3732: checking for $ac_word" >&5
echo "configure:3730: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3762,7 +3757,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3763: checking for $ac_word" >&5
echo "configure:3761: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3806,7 +3801,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3807: checking for $ac_word" >&5
echo "configure:3805: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3837,7 +3832,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3838: checking for $ac_word" >&5
echo "configure:3836: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3881,7 +3876,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3882: checking for $ac_word" >&5
echo "configure:3880: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3912,7 +3907,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3913: checking for $ac_word" >&5
echo "configure:3911: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3956,7 +3951,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3957: checking for $ac_word" >&5
echo "configure:3955: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3987,7 +3982,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3988: checking for $ac_word" >&5
echo "configure:3986: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4031,7 +4026,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4032: checking for $ac_word" >&5
echo "configure:4030: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4062,7 +4057,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4063: checking for $ac_word" >&5
echo "configure:4061: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4106,7 +4101,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4107: checking for $ac_word" >&5
echo "configure:4105: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4137,7 +4132,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4138: checking for $ac_word" >&5
echo "configure:4136: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4176,7 +4171,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4177: checking for $ac_word" >&5
echo "configure:4175: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4207,7 +4202,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4208: checking for $ac_word" >&5
echo "configure:4206: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4246,7 +4241,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4247: checking for $ac_word" >&5
echo "configure:4245: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4277,7 +4272,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4278: checking for $ac_word" >&5
echo "configure:4276: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4321,7 +4316,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4322: checking for $ac_word" >&5
echo "configure:4320: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4352,7 +4347,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4353: checking for $ac_word" >&5
echo "configure:4351: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4396,7 +4391,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4397: checking for $ac_word" >&5
echo "configure:4395: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4427,7 +4422,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4428: checking for $ac_word" >&5
echo "configure:4426: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4478,7 +4473,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4479: checking for $ac_word" >&5
echo "configure:4477: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4509,7 +4504,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4510: checking for $ac_word" >&5
echo "configure:4508: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4553,7 +4548,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4554: checking for $ac_word" >&5
echo "configure:4552: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4584,7 +4579,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4585: checking for $ac_word" >&5
echo "configure:4583: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4628,7 +4623,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4629: checking for $ac_word" >&5
echo "configure:4627: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4659,7 +4654,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4660: checking for $ac_word" >&5
echo "configure:4658: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4703,7 +4698,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4704: checking for $ac_word" >&5
echo "configure:4702: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4734,7 +4729,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4735: checking for $ac_word" >&5
echo "configure:4733: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4778,7 +4773,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4779: checking for $ac_word" >&5
echo "configure:4777: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4809,7 +4804,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4810: checking for $ac_word" >&5
echo "configure:4808: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4853,7 +4848,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4854: checking for $ac_word" >&5
echo "configure:4852: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4884,7 +4879,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4885: checking for $ac_word" >&5
echo "configure:4883: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4923,7 +4918,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4924: checking for $ac_word" >&5
echo "configure:4922: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4954,7 +4949,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4955: checking for $ac_word" >&5
echo "configure:4953: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -4998,7 +4993,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4999: checking for $ac_word" >&5
echo "configure:4997: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5029,7 +5024,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5030: checking for $ac_word" >&5
echo "configure:5028: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5073,7 +5068,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5074: checking for $ac_word" >&5
echo "configure:5072: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5104,7 +5099,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5105: checking for $ac_word" >&5
echo "configure:5103: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5148,7 +5143,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5149: checking for $ac_word" >&5
echo "configure:5147: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5179,7 +5174,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5180: checking for $ac_word" >&5
echo "configure:5178: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5223,7 +5218,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5224: checking for $ac_word" >&5
echo "configure:5222: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5254,7 +5249,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5255: checking for $ac_word" >&5
echo "configure:5253: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5298,7 +5293,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5299: checking for $ac_word" >&5
echo "configure:5297: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5329,7 +5324,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5330: checking for $ac_word" >&5
echo "configure:5328: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5373,7 +5368,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5374: checking for $ac_word" >&5
echo "configure:5372: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5404,7 +5399,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5405: checking for $ac_word" >&5
echo "configure:5403: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5443,7 +5438,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5444: checking for $ac_word" >&5
echo "configure:5442: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5474,7 +5469,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5475: checking for $ac_word" >&5
echo "configure:5473: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5518,7 +5513,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5519: checking for $ac_word" >&5
echo "configure:5517: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5549,7 +5544,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5550: checking for $ac_word" >&5
echo "configure:5548: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -5592,7 +5587,7 @@ fi
RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
echo "configure:5593: checking where to find the target ar" >&5
echo "configure:5591: checking where to find the target ar" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -5617,7 +5612,7 @@ else
fi
fi
echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
echo "configure:5618: checking where to find the target as" >&5
echo "configure:5616: checking where to find the target as" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -5642,7 +5637,7 @@ else
fi
fi
echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
echo "configure:5643: checking where to find the target cc" >&5
echo "configure:5641: checking where to find the target cc" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -5667,7 +5662,7 @@ else
fi
fi
echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
echo "configure:5668: checking where to find the target c++" >&5
echo "configure:5666: checking where to find the target c++" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -5695,7 +5690,7 @@ else
fi
fi
echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
echo "configure:5696: checking where to find the target c++ for libstdc++" >&5
echo "configure:5694: checking where to find the target c++ for libstdc++" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -5723,7 +5718,7 @@ else
fi
fi
echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
echo "configure:5724: checking where to find the target dlltool" >&5
echo "configure:5722: checking where to find the target dlltool" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -5748,7 +5743,7 @@ else
fi
fi
echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
echo "configure:5749: checking where to find the target gcc" >&5
echo "configure:5747: checking where to find the target gcc" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -5773,7 +5768,7 @@ else
fi
fi
echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
echo "configure:5774: checking where to find the target gcj" >&5
echo "configure:5772: checking where to find the target gcj" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -5801,7 +5796,7 @@ else
fi
fi
echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
echo "configure:5802: checking where to find the target gfortran" >&5
echo "configure:5800: checking where to find the target gfortran" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -5829,7 +5824,7 @@ else
fi
fi
echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
echo "configure:5830: checking where to find the target ld" >&5
echo "configure:5828: checking where to find the target ld" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -5854,7 +5849,7 @@ else
fi
fi
echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
echo "configure:5855: checking where to find the target lipo" >&5
echo "configure:5853: checking where to find the target lipo" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -5869,7 +5864,7 @@ else
fi
fi
echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
echo "configure:5870: checking where to find the target nm" >&5
echo "configure:5868: checking where to find the target nm" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -5894,7 +5889,7 @@ else
fi
fi
echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
echo "configure:5895: checking where to find the target objdump" >&5
echo "configure:5893: checking where to find the target objdump" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -5919,7 +5914,7 @@ else
fi
fi
echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
echo "configure:5920: checking where to find the target ranlib" >&5
echo "configure:5918: checking where to find the target ranlib" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -5944,7 +5939,7 @@ else
fi
fi
echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
echo "configure:5945: checking where to find the target strip" >&5
echo "configure:5943: checking where to find the target strip" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -5969,7 +5964,7 @@ else
fi
fi
echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
echo "configure:5970: checking where to find the target windres" >&5
echo "configure:5968: checking where to find the target windres" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
......@@ -6022,7 +6017,7 @@ fi
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:6023: checking whether to enable maintainer-specific portions of Makefiles" >&5
echo "configure:6021: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
......@@ -6065,42 +6060,6 @@ case $build in
esac
# It makes debugging easier if we create as symlinks the stage directories
# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
# possible, however, we can resort to mv.
echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
echo "configure:6070: checking if symbolic links between directories work" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "${LN_S}" = "ln -s" \
&& mkdir confdir.s1 \
&& ln -s confdir.s1 confdir.s2 \
&& echo timestamp1 > confdir.s1/conftest.1 \
&& cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \
&& echo timestamp2 > confdir.s2/conftest.2 \
&& cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \
&& rm -f confdir.s2; then
gcc_cv_prog_ln_s_dir=yes
else
gcc_cv_prog_ln_s_dir=no
fi
rm -rf confdir.s1 confdir.s2
fi
echo "$ac_t""$gcc_cv_prog_ln_s_dir" 1>&6
case ${gcc_cv_prog_ln_s_dir} in
yes)
CREATE_LINK_TO_DIR='ln -s $$1 $$2'
UNDO_LINK_TO_DIR='rm -f $$1' ;;
*)
CREATE_LINK_TO_DIR='mv $$1 $$2'
UNDO_LINK_TO_DIR='mv $$1 $$2' ;;
esac
# Enable -Werror in bootstrap stage2 and later.
# Change the default to "no" on release branches.
# Check whether --enable-werror or --disable-werror was given.
......@@ -6293,7 +6252,6 @@ s%@gmplibs@%$gmplibs%g
s%@gmpinc@%$gmpinc%g
s%@stage1_languages@%$stage1_languages%g
s%@SYSROOT_CFLAGS_FOR_TARGET@%$SYSROOT_CFLAGS_FOR_TARGET%g
s%@bootstrap_lean@%$bootstrap_lean%g
/@serialization_dependencies@/r $serialization_dependencies
s%@serialization_dependencies@%%g
/@host_makefile_frag@/r $host_makefile_frag
......@@ -6365,8 +6323,6 @@ s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
s%@stage1_cflags@%$stage1_cflags%g
s%@CREATE_LINK_TO_DIR@%$CREATE_LINK_TO_DIR%g
s%@UNDO_LINK_TO_DIR@%$UNDO_LINK_TO_DIR%g
s%@stage2_werror_flag@%$stage2_werror_flag%g
CEOF
......
configure.in
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
# 1999, 2000, 2001, 2002, 2003, 2004, 2006 Free Software Foundation, Inc.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
......@@ -1736,7 +1736,7 @@ INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
# not to nest @if/@endif pairs, because configure will not warn you at all.
AC_ARG_ENABLE([bootstrap],
[ --enable-bootstrap[=lean] Enable bootstrapping [no]],,
[ --enable-bootstrap Enable bootstrapping [yes if native build]],,
enable_bootstrap=default)
# Issue errors and warnings for invalid/strange bootstrap combinations.
......@@ -1757,17 +1757,17 @@ case "$have_compiler:$host:$target:$enable_bootstrap" in
enable_bootstrap=no ;;
# We have a compiler and we are in a native configuration, bootstrap is ok
yes:$build:$build:yes | yes:$build:$build:lean)
yes:$build:$build:yes)
;;
# Other configurations, but we have a compiler. Assume the user knows
# what he's doing.
yes:*:*:yes | yes:*:*:lean)
yes:*:*:yes)
AC_MSG_WARN([trying to bootstrap a cross compiler])
;;
# No compiler: if they passed --enable-bootstrap explicitly, fail
no:*:*:yes | no:*:*:lean)
no:*:*:yes)
AC_MSG_ERROR([cannot bootstrap without a compiler]) ;;
# Fail if wrong command line
......@@ -1779,15 +1779,10 @@ esac
# Adjust the toplevel makefile according to whether bootstrap was selected.
case "$enable_bootstrap" in
yes)
bootstrap_lean='#'
bootstrap_suffix=bootstrap ;;
lean)
bootstrap_lean=''
bootstrap_suffix=bootstrap ;;
no)
bootstrap_suffix=no-bootstrap ;;
esac
AC_SUBST(bootstrap_lean)
for module in ${build_configdirs} ; do
if test -z "${no_recursion}" \
......@@ -2290,36 +2285,6 @@ case $build in
esac
AC_SUBST(stage1_cflags)
# It makes debugging easier if we create as symlinks the stage directories
# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
# possible, however, we can resort to mv.
AC_CACHE_CHECK([if symbolic links between directories work],
[gcc_cv_prog_ln_s_dir],
[if test "${LN_S}" = "ln -s" \
&& mkdir confdir.s1 \
&& ln -s confdir.s1 confdir.s2 \
&& echo timestamp1 > confdir.s1/conftest.1 \
&& cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \
&& echo timestamp2 > confdir.s2/conftest.2 \
&& cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \
&& rm -f confdir.s2; then
gcc_cv_prog_ln_s_dir=yes
else
gcc_cv_prog_ln_s_dir=no
fi
rm -rf confdir.s1 confdir.s2])
case ${gcc_cv_prog_ln_s_dir} in
yes)
CREATE_LINK_TO_DIR='ln -s $$1 $$2'
UNDO_LINK_TO_DIR='rm -f $$1' ;;
*)
CREATE_LINK_TO_DIR='mv $$1 $$2'
UNDO_LINK_TO_DIR='mv $$1 $$2' ;;
esac
AC_SUBST(CREATE_LINK_TO_DIR)
AC_SUBST(UNDO_LINK_TO_DIR)
# Enable -Werror in bootstrap stage2 and later.
# Change the default to "no" on release branches.
AC_ARG_ENABLE(werror,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment