configure.in (enable_coverage): New enable switch.

	* configure.in (enable_coverage): New enable switch.
	* configure: Rebuilt.
	* Makefile.in (COVERAGE_FLAGS, coverageexts): New variables.
	(INTERNAL_CFLAGS): Append COVERAGE_FLAGS.
	(ALL_FLAGS): Reorder so INTERNAL_CFLAGS comes after CFLAGS.
	(mostlyclean): Remove coverage files.
	* doc/install.texi: Document enable_coverage.

	* cp/Make-lang.in (c++.mostlyclean): Remove coverage files.
	* ada/Make-lang.in (ada.mostlyclean): Remove coverage files.
	* f/Make-lang.in (f.mostlyclean): Remove coverage files.
	* java/Make-lang.in (java.mostlyclean): Remove coverage files.
	* objc/Make-lang.in (objc.mostlyclean): Remove coverage files.
	* treelang/Make-lang.in (treelang.mostlyclean): Remove coverage
	files.

From-SVN: r56126

gcc/ChangeLog

+2002-08-08  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* configure.in (enable_coverage): New enable switch.
+	* configure: Rebuilt.
+	* Makefile.in (COVERAGE_FLAGS, coverageexts): New variables.
+	(INTERNAL_CFLAGS): Append COVERAGE_FLAGS.
+	(ALL_FLAGS): Reorder so INTERNAL_CFLAGS comes after CFLAGS.
+	(mostlyclean): Remove coverage files.
+	* doc/install.texi: Document enable_coverage.
+
+	* cp/Make-lang.in (c++.mostlyclean): Remove coverage files.
+	* ada/Make-lang.in (ada.mostlyclean): Remove coverage files.
+	* f/Make-lang.in (f.mostlyclean): Remove coverage files.
+	* java/Make-lang.in (java.mostlyclean): Remove coverage files.
+	* objc/Make-lang.in (objc.mostlyclean): Remove coverage files.
+	* treelang/Make-lang.in (treelang.mostlyclean): Remove coverage
+	files.
+	
 2002-08-08  Neil Booth  <neil@daikokuya.co.uk>
 
 	* c-opts.c (cpp_opts): New.

gcc/Makefile.in

@@ -69,6 +69,13 @@ CFLAGS = -g
 STAGE1_CFLAGS = -g @stage1_cflags@
 BOOT_CFLAGS = -g -O2
 
+# Flags to determine code coverage. When coverage is disabled, this will
+# contain the optimization flags, as you normally want code coverage
+# without optimization. The -dumpbase $@ makes sure that the auxilary
+# files end up near the object files.
+COVERAGE_FLAGS = @coverage_flags@
+coverageexts = .{da,bb,bbg}
+
 # The warning flags are separate from BOOT_CFLAGS because people tend to
 # override optimization flags and we'd like them to still have warnings
 # turned on.  These flags are also used to pass other stage dependent
@@ -587,13 +594,13 @@ all.indirect: $(ALL)
 # IN_GCC distinguishes between code compiled into GCC itself and other
 # programs built during a bootstrap.
 # autoconf inserts -DCROSS_COMPILE if we are building a cross compiler.
-INTERNAL_CFLAGS = -DIN_GCC @CROSS@
+INTERNAL_CFLAGS = -DIN_GCC @CROSS@ $(COVERAGE_FLAGS)
 
 # This is the variable actually used when we compile.
 # If you change this line, you probably also need to change the definition
 # of HOST_CFLAGS in build-make to match.
-ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) \
-  $(CFLAGS) $(WARN_CFLAGS) $(XCFLAGS) @DEFS@
+ALL_CFLAGS = $(X_CFLAGS) $(T_CFLAGS) \
+  $(CFLAGS) $(INTERNAL_CFLAGS) $(WARN_CFLAGS) $(XCFLAGS) @DEFS@
 
 # Likewise.
 ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS)
@@ -2602,6 +2609,7 @@ $(docdir)/fsf-funding.7: $(docdir)/include/funding.texi
 INTL_MOSTLYCLEAN = intl.mostlyclean
 mostlyclean: $(INTL_MOSTLYCLEAN) lang.mostlyclean
 	-rm -f $(STAGESTUFF)
+	-rm -f *$(coverageexts)
 	-rm -rf libgcc
 # Delete the temporary source copies for cross compilation.
 	-rm -f $(BUILD_PREFIX_1)rtl.c $(BUILD_PREFIX_1)print-rtl.c

gcc/ada/ChangeLog

+2002-08-08  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* ada/Make-lang.in (ada.mostlyclean): Remove coverage files.
+
 2002-07-29  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>
 
 	* adadecode.c (ada_demangle): Use xstrdup in lieu of

gcc/ada/Make-lang.in

@@ -762,6 +762,7 @@ ada.uninstall:
 
 ada.mostlyclean:
 	-$(RM) ada/*$(objext) ada/*.ali ada/b_*.c
+	-$(RM) ada/*$(coverageexts)
 	-$(RM) ada/sdefault.adb ada/stamp-sdefault
 	-$(RMDIR) ada/tools
 ada.clean:

gcc/configure

@@ -37,6 +37,13 @@ ac_help="$ac_help
 			  Categories are: misc,tree,rtl,rtlflag,gc,gcac;
 			  default is misc,tree,gc,rtlflag"
 ac_help="$ac_help
+  --enable-coverage[=LEVEL]
+			  enable compiler\'s code coverage collection.
+			  Use to measure compiler performance and locate
+			  unused parts of the compiler. With LEVEL, specificy
+			  optimization. Values are opt, noopt,
+			  default is noopt"
+ac_help="$ac_help
   --with-cpp-install-dir=DIR
                           install the user visible C preprocessor in DIR
                           (relative to PREFIX) as well as PREFIX/bin"
@@ -618,7 +625,7 @@ copy=cp
 # - two terminals occur directly after each other
 # - the path contains an element with a dot in it
 echo $ac_n "checking LIBRARY_PATH variable""... $ac_c" 1>&6
-echo "configure:622: checking LIBRARY_PATH variable" >&5
+echo "configure:629: checking LIBRARY_PATH variable" >&5
 case ${LIBRARY_PATH} in
   [:\;]* | *[:\;] | *[:\;][:\;]* |  *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
     library_path_setting="contains current directory"
@@ -643,7 +650,7 @@ fi
 # - two terminals occur directly after each other
 # - the path contains an element with a dot in it
 echo $ac_n "checking GCC_EXEC_PREFIX variable""... $ac_c" 1>&6
-echo "configure:647: checking GCC_EXEC_PREFIX variable" >&5
+echo "configure:654: checking GCC_EXEC_PREFIX variable" >&5
 case ${GCC_EXEC_PREFIX} in
   [:\;]* | *[:\;] | *[:\;][:\;]* |  *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
     gcc_exec_prefix_setting="contains current directory"
@@ -867,6 +874,27 @@ EOF
 
 fi
 
+# Enable code coverage collection
+# Check whether --enable-coverage or --disable-coverage was given.
+if test "${enable_coverage+set}" = set; then
+  enableval="$enable_coverage"
+  case "${enableval}" in
+yes|noopt)
+	coverage_flags="-fprofile-arcs -ftest-coverage -O0"
+	;;
+opt)
+	coverage_flags="-fprofile-arcs -ftest-coverage -O2"
+	;;
+*)
+	{ echo "configure: error: unknown coverage setting $enableval" 1>&2; exit 1; }
+	;;
+esac
+else
+  coverage_flags="-O2"
+fi
+
+
+
 # Check whether --with-cpp_install_dir or --without-cpp_install_dir was given.
 if test "${with_cpp_install_dir+set}" = set; then
   withval="$with_cpp_install_dir"
@@ -1032,7 +1060,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1036: checking host system type" >&5
+echo "configure:1064: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -1053,7 +1081,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1057: checking target system type" >&5
+echo "configure:1085: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -1071,7 +1099,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1075: checking build system type" >&5
+echo "configure:1103: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -1119,7 +1147,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1123: checking for $ac_word" >&5
+echo "configure:1151: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1149,7 +1177,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1153: checking for $ac_word" >&5
+echo "configure:1181: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1200,7 +1228,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1204: checking for $ac_word" >&5
+echo "configure:1232: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1232,7 +1260,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1236: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1264: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1243,12 +1271,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1247 "configure"
+#line 1275 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1252: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1280: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1274,12 +1302,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1278: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1306: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1283: checking whether we are using GNU C" >&5
+echo "configure:1311: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1288,7 +1316,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1292: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1320: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1307,7 +1335,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1311: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1339: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1340,10 +1368,10 @@ fi
 
 if test "x$CC" != xcc; then
   echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
-echo "configure:1344: checking whether $CC and cc understand -c and -o together" >&5
+echo "configure:1372: checking whether $CC and cc understand -c and -o together" >&5
 else
   echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
-echo "configure:1347: checking whether cc understands -c and -o together" >&5
+echo "configure:1375: checking whether cc understands -c and -o together" >&5
 fi
 set dummy $CC; ac_cc="`echo $2 |
 		       sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
@@ -1355,16 +1383,16 @@ else
 # We do the test twice because some compilers refuse to overwrite an
 # existing .o file with -o, though they will create one.
 ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
-if { (eval echo configure:1359: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
-   test -f conftest.o && { (eval echo configure:1360: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+if { (eval echo configure:1387: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+   test -f conftest.o && { (eval echo configure:1388: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
 then
   eval ac_cv_prog_cc_${ac_cc}_c_o=yes
   if test "x$CC" != xcc; then
     # Test first that cc exists at all.
-    if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1365: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+    if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1393: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
       ac_try='cc -c conftest.c -o conftest.o 1>&5'
-      if { (eval echo configure:1367: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
-	 test -f conftest.o && { (eval echo configure:1368: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+      if { (eval echo configure:1395: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+	 test -f conftest.o && { (eval echo configure:1396: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
       then
         # cc works too.
         :
@@ -1410,7 +1438,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1414: checking for $ac_word" >&5
+echo "configure:1442: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1442,7 +1470,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "gnatbind", so it can be a program name with args.
 set dummy gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1446: checking for $ac_word" >&5
+echo "configure:1474: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1475,7 +1503,7 @@ fi
 fi
 
 echo $ac_n "checking for compiler driver that understands Ada""... $ac_c" 1>&6
-echo "configure:1479: checking for compiler driver that understands Ada" >&5
+echo "configure:1507: checking for compiler driver that understands Ada" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_adac'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1520,21 +1548,21 @@ fi
 
 
 echo $ac_n "checking whether ${CC-cc} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1524: checking whether ${CC-cc} accepts -Wno-long-long" >&5
+echo "configure:1552: checking whether ${CC-cc} accepts -Wno-long-long" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_no_long_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   save_CFLAGS="$CFLAGS"
 CFLAGS="-Wno-long-long"
 cat > conftest.$ac_ext <<EOF
-#line 1531 "configure"
+#line 1559 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1538: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1566: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_prog_cc_no_long_long=yes
 else
@@ -1551,7 +1579,7 @@ echo "$ac_t""$ac_cv_prog_cc_no_long_long" 1>&6
 
 if test x$have_gnat != xno ; then 
 echo $ac_n "checking whether ${ADAC} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1555: checking whether ${ADAC} accepts -Wno-long-long" >&5
+echo "configure:1583: checking whether ${ADAC} accepts -Wno-long-long" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_adac_no_long_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1579,7 +1607,7 @@ fi
 
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1583: checking how to run the C preprocessor" >&5
+echo "configure:1611: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1594,13 +1622,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1598 "configure"
+#line 1626 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1604: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1632: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1611,13 +1639,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1615 "configure"
+#line 1643 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1621: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1649: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1628,13 +1656,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 1632 "configure"
+#line 1660 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1638: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1666: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1659,21 +1687,21 @@ fi
 echo "$ac_t""$CPP" 1>&6
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1663: checking for inline" >&5
+echo "configure:1691: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 1670 "configure"
+#line 1698 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:1677: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1705: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -1699,19 +1727,19 @@ EOF
 esac
 
 echo $ac_n "checking for volatile""... $ac_c" 1>&6
-echo "configure:1703: checking for volatile" >&5
+echo "configure:1731: checking for volatile" >&5
 if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1708 "configure"
+#line 1736 "configure"
 #include "confdefs.h"
 
 int main() {
 volatile int foo;
 ; return 0; }
 EOF
-if { (eval echo configure:1715: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1743: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_c_volatile=yes
 else
@@ -1733,7 +1761,7 @@ fi
 
 
 echo $ac_n "checking for long double""... $ac_c" 1>&6
-echo "configure:1737: checking for long double" >&5
+echo "configure:1765: checking for long double" >&5
 if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1741,7 +1769,7 @@ else
   gcc_cv_c_long_double=yes
 else
 cat > conftest.$ac_ext <<EOF
-#line 1745 "configure"
+#line 1773 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -1751,7 +1779,7 @@ long double foo = 0.0;
 switch (0) case 0: case (sizeof(long double) >= sizeof(double)):;
 ; return 0; }
 EOF
-if { (eval echo configure:1755: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1783: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_c_long_double=yes
 else
@@ -1773,19 +1801,19 @@ EOF
 fi
 
 echo $ac_n "checking for long long int""... $ac_c" 1>&6
-echo "configure:1777: checking for long long int" >&5
+echo "configure:1805: checking for long long int" >&5
 if eval "test \"`echo '$''{'ac_cv_c_long_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1782 "configure"
+#line 1810 "configure"
 #include "confdefs.h"
 
 int main() {
 long long int i;
 ; return 0; }
 EOF
-if { (eval echo configure:1789: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1817: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_long_long=yes
 else
@@ -1805,19 +1833,19 @@ EOF
 
   fi
 echo $ac_n "checking for __int64""... $ac_c" 1>&6
-echo "configure:1809: checking for __int64" >&5
+echo "configure:1837: checking for __int64" >&5
 if eval "test \"`echo '$''{'ac_cv_c___int64'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1814 "configure"
+#line 1842 "configure"
 #include "confdefs.h"
 
 int main() {
 __int64 i;
 ; return 0; }
 EOF
-if { (eval echo configure:1821: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1849: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c___int64=yes
 else
@@ -1838,19 +1866,19 @@ EOF
   fi
 
 echo $ac_n "checking for built-in _Bool""... $ac_c" 1>&6
-echo "configure:1842: checking for built-in _Bool" >&5
+echo "configure:1870: checking for built-in _Bool" >&5
 if eval "test \"`echo '$''{'gcc_cv_c__bool'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1847 "configure"
+#line 1875 "configure"
 #include "confdefs.h"
 
 int main() {
 _Bool foo;
 ; return 0; }
 EOF
-if { (eval echo configure:1854: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1882: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_c__bool=yes
 else
@@ -1874,13 +1902,13 @@ fi
 
 # sizeof(char) is 1 by definition.
 echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:1878: checking size of short" >&5
+echo "configure:1906: checking size of short" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   for ac_size in 4 8 1 2 16  ; do # List sizes in rough order of prevalence.
   cat > conftest.$ac_ext <<EOF
-#line 1884 "configure"
+#line 1912 "configure"
 #include "confdefs.h"
 #include "confdefs.h"
 #include <sys/types.h>
@@ -1890,7 +1918,7 @@ int main() {
 switch (0) case 0: case (sizeof (short) == $ac_size):;
 ; return 0; }
 EOF
-if { (eval echo configure:1894: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1922: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_sizeof_short=$ac_size
 else
@@ -1913,13 +1941,13 @@ EOF
 
 
 echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:1917: checking size of int" >&5
+echo "configure:1945: checking size of int" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   for ac_size in 4 8 1 2 16  ; do # List sizes in rough order of prevalence.
   cat > conftest.$ac_ext <<EOF
-#line 1923 "configure"
+#line 1951 "configure"
 #include "confdefs.h"
 #include "confdefs.h"
 #include <sys/types.h>
@@ -1929,7 +1957,7 @@ int main() {
 switch (0) case 0: case (sizeof (int) == $ac_size):;
 ; return 0; }
 EOF
-if { (eval echo configure:1933: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1961: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_sizeof_int=$ac_size
 else
@@ -1952,13 +1980,13 @@ EOF
 
 
 echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:1956: checking size of long" >&5
+echo "configure:1984: checking size of long" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   for ac_size in 4 8 1 2 16  ; do # List sizes in rough order of prevalence.
   cat > conftest.$ac_ext <<EOF
-#line 1962 "configure"
+#line 1990 "configure"
 #include "confdefs.h"
 #include "confdefs.h"
 #include <sys/types.h>
@@ -1968,7 +1996,7 @@ int main() {
 switch (0) case 0: case (sizeof (long) == $ac_size):;
 ; return 0; }
 EOF
-if { (eval echo configure:1972: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2000: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_sizeof_long=$ac_size
 else
@@ -1992,13 +2020,13 @@ EOF
 
 if test $ac_cv_c_long_long = yes; then
   echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:1996: checking size of long long" >&5
+echo "configure:2024: checking size of long long" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   for ac_size in 4 8 1 2 16  ; do # List sizes in rough order of prevalence.
   cat > conftest.$ac_ext <<EOF
-#line 2002 "configure"
+#line 2030 "configure"
 #include "confdefs.h"
 #include "confdefs.h"
 #include <sys/types.h>
@@ -2008,7 +2036,7 @@ int main() {
 switch (0) case 0: case (sizeof (long long) == $ac_size):;
 ; return 0; }
 EOF
-if { (eval echo configure:2012: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2040: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_sizeof_long_long=$ac_size
 else
@@ -2033,13 +2061,13 @@ EOF
 fi
 if test $ac_cv_c___int64 = yes; then
   echo $ac_n "checking size of __int64""... $ac_c" 1>&6
-echo "configure:2037: checking size of __int64" >&5
+echo "configure:2065: checking size of __int64" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof___int64'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   for ac_size in 4 8 1 2 16  ; do # List sizes in rough order of prevalence.
   cat > conftest.$ac_ext <<EOF
-#line 2043 "configure"
+#line 2071 "configure"
 #include "confdefs.h"
 #include "confdefs.h"
 #include <sys/types.h>
@@ -2049,7 +2077,7 @@ int main() {
 switch (0) case 0: case (sizeof (__int64) == $ac_size):;
 ; return 0; }
 EOF
-if { (eval echo configure:2053: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2081: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_sizeof___int64=$ac_size
 else
@@ -2074,12 +2102,12 @@ EOF
 fi
 
 echo $ac_n "checking execution character set""... $ac_c" 1>&6
-echo "configure:2078: checking execution character set" >&5
+echo "configure:2106: checking execution character set" >&5
 if eval "test \"`echo '$''{'ac_cv_c_charset'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2083 "configure"
+#line 2111 "configure"
 #include "confdefs.h"
 #if '\n' == 0x0A && ' ' == 0x20 && '0' == 0x30 \
    && 'A' == 0x41 && 'a' == 0x61 && '!' == 0x21
@@ -2095,7 +2123,7 @@ rm -f conftest*
 
   if test x${ac_cv_c_charset+set} != xset; then
     cat > conftest.$ac_ext <<EOF
-#line 2099 "configure"
+#line 2127 "configure"
 #include "confdefs.h"
 #if '\n' == 0x15 && ' ' == 0x40 && '0' == 0xF0 \
    && 'A' == 0xC1 && 'a' == 0x81 && '!' == 0x5A
@@ -2156,7 +2184,7 @@ esac
 
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:2160: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:2188: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2184,7 +2212,7 @@ fi
 
 
 echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
-echo "configure:2188: checking whether a default assembler was specified" >&5
+echo "configure:2216: checking whether a default assembler was specified" >&5
 if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
     if test x"$gas_flag" = x"no"; then
     	echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
@@ -2196,7 +2224,7 @@ else
 fi
 
 echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
-echo "configure:2200: checking whether a default linker was specified" >&5
+echo "configure:2228: checking whether a default linker was specified" >&5
 if test x"${DEFAULT_LINKER+set}" = x"set"; then
     if test x"$gnu_ld_flag" = x"no"; then
 	echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
@@ -2208,12 +2236,12 @@ else
 fi
 
 echo $ac_n "checking for GNU C library""... $ac_c" 1>&6
-echo "configure:2212: checking for GNU C library" >&5
+echo "configure:2240: checking for GNU C library" >&5
 if eval "test \"`echo '$''{'gcc_cv_glibc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2217 "configure"
+#line 2245 "configure"
 #include "confdefs.h"
 #include <features.h>
 int main() {
@@ -2223,7 +2251,7 @@ int main() {
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:2227: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2255: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_glibc=yes
 else
@@ -2244,12 +2272,12 @@ EOF
 fi
 
 # Find some useful tools
-for ac_prog in mawk gawk nawk awk
+for ac_prog in gawk mawk nawk awk
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2253: checking for $ac_word" >&5
+echo "configure:2281: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2279,7 +2307,7 @@ test -n "$AWK" && break
 done
 
 echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:2283: checking whether ln works" >&5
+echo "configure:2311: checking whether ln works" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2311,7 +2339,7 @@ else
 fi
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2315: checking whether ln -s works" >&5
+echo "configure:2343: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2345,7 +2373,7 @@ fi
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2349: checking for $ac_word" >&5
+echo "configure:2377: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2383,7 +2411,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:2387: checking for a BSD compatible install" >&5
+echo "configure:2415: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2434,12 +2462,12 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2438: checking for ANSI C header files" >&5
+echo "configure:2466: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2443 "configure"
+#line 2471 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -2447,7 +2475,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2451: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2479: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2464,7 +2492,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2468 "configure"
+#line 2496 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -2482,7 +2510,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2486 "configure"
+#line 2514 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -2503,7 +2531,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 2507 "configure"
+#line 2535 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -2514,7 +2542,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:2518: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2546: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -2538,12 +2566,12 @@ EOF
 fi
 
 echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:2542: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:2570: checking whether time.h and sys/time.h may both be included" >&5
 if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2547 "configure"
+#line 2575 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/time.h>
@@ -2552,7 +2580,7 @@ int main() {
 struct tm *tp;
 ; return 0; }
 EOF
-if { (eval echo configure:2556: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2584: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_time=yes
 else
@@ -2573,19 +2601,19 @@ EOF
 fi
 
 echo $ac_n "checking for working stdbool.h""... $ac_c" 1>&6
-echo "configure:2577: checking for working stdbool.h" >&5
+echo "configure:2605: checking for working stdbool.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdbool_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2582 "configure"
+#line 2610 "configure"
 #include "confdefs.h"
 #include <stdbool.h>
 int main() {
 bool foo = false;
 ; return 0; }
 EOF
-if { (eval echo configure:2589: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2617: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_stdbool_h=yes
 else
@@ -2606,12 +2634,12 @@ EOF
 fi
 
 echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6
-echo "configure:2610: checking whether string.h and strings.h may both be included" >&5
+echo "configure:2638: checking whether string.h and strings.h may both be included" >&5
 if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2615 "configure"
+#line 2643 "configure"
 #include "confdefs.h"
 #include <string.h>
 #include <strings.h>
@@ -2619,7 +2647,7 @@ int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:2623: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2651: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_header_string=yes
 else
@@ -2640,12 +2668,12 @@ EOF
 fi
 
 echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:2644: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:2672: checking for sys/wait.h that is POSIX.1 compatible" >&5
 if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2649 "configure"
+#line 2677 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/wait.h>
@@ -2661,7 +2689,7 @@ wait (&s);
 s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
 ; return 0; }
 EOF
-if { (eval echo configure:2665: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2693: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_sys_wait_h=yes
 else
@@ -2688,17 +2716,17 @@ for ac_hdr in limits.h stddef.h string.h strings.h stdlib.h time.h \
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2692: checking for $ac_hdr" >&5
+echo "configure:2720: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2697 "configure"
+#line 2725 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2702: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2730: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2728,17 +2756,17 @@ done
 # Check for thread headers.
 ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for thread.h""... $ac_c" 1>&6
-echo "configure:2732: checking for thread.h" >&5
+echo "configure:2760: checking for thread.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2737 "configure"
+#line 2765 "configure"
 #include "confdefs.h"
 #include <thread.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2742: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2770: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2762,17 +2790,17 @@ fi
 
 ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
-echo "configure:2766: checking for pthread.h" >&5
+echo "configure:2794: checking for pthread.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2771 "configure"
+#line 2799 "configure"
 #include "confdefs.h"
 #include <pthread.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2776: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2804: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2797,12 +2825,12 @@ fi
 
 # These tests can't be done till we know if we have limits.h.
 echo $ac_n "checking for CHAR_BIT""... $ac_c" 1>&6
-echo "configure:2801: checking for CHAR_BIT" >&5
+echo "configure:2829: checking for CHAR_BIT" >&5
 if eval "test \"`echo '$''{'gcc_cv_decl_char_bit'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2806 "configure"
+#line 2834 "configure"
 #include "confdefs.h"
 #ifdef HAVE_LIMITS_H
 #include <limits.h>
@@ -2827,7 +2855,7 @@ fi
 echo "$ac_t""$gcc_cv_decl_char_bit" 1>&6
 if test $gcc_cv_decl_char_bit = no; then
   echo $ac_n "checking number of bits in a byte""... $ac_c" 1>&6
-echo "configure:2831: checking number of bits in a byte" >&5
+echo "configure:2859: checking number of bits in a byte" >&5
 if eval "test \"`echo '$''{'gcc_cv_c_nbby'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2835,7 +2863,7 @@ else
  gcc_cv_c_nbby=
  while test $i -lt 65; do
    cat > conftest.$ac_ext <<EOF
-#line 2839 "configure"
+#line 2867 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -2845,7 +2873,7 @@ switch(0) {
   ; }
 ; return 0; }
 EOF
-if { (eval echo configure:2849: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2877: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_c_nbby=$i; break
 else
@@ -2870,7 +2898,7 @@ EOF
 fi
 fi
 echo $ac_n "checking byte ordering""... $ac_c" 1>&6
-echo "configure:2874: checking byte ordering" >&5
+echo "configure:2902: checking byte ordering" >&5
 if eval "test \"`echo '$''{'ac_cv_c_compile_endian'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2884,7 +2912,7 @@ ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$a
 cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext <<EOF
-#line 2888 "configure"
+#line 2916 "configure"
 #include "confdefs.h"
 
 #ifdef HAVE_LIMITS_H
@@ -2904,7 +2932,7 @@ cat > conftest.$ac_ext <<EOF
     'X', '\n'
 };
 EOF
-if { (eval echo configure:2908: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2936: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   od -c conftest.o |
     sed 's/^[0-7]*[ 	]*/ /
 	  s/\*/./g
@@ -2943,7 +2971,7 @@ EOF
 fi
 
 echo $ac_n "checking floating point format""... $ac_c" 1>&6
-echo "configure:2947: checking floating point format" >&5
+echo "configure:2975: checking floating point format" >&5
 if eval "test \"`echo '$''{'ac_cv_c_float_format'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2956,7 +2984,7 @@ ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$a
 cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext <<EOF
-#line 2960 "configure"
+#line 2988 "configure"
 #include "confdefs.h"
 /* This will not work unless sizeof(double) == 8.  */
 extern char sizeof_double_must_be_8 [sizeof(double) == 8 ? 1 : -1];
@@ -2978,7 +3006,7 @@ struct possibility table [] =
   C(-5.22995989424860458374e+10)  /* IBMHEXFP - s/390 format, EBCDIC */
 };
 EOF
-if { (eval echo configure:2982: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3010: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   od -c conftest.o |
     sed 's/^[0-7]*[ 	]*/ /
 	  s/\*/./g
@@ -3067,7 +3095,7 @@ fi
 # Extract the first word of "mktemp", so it can be a program name with args.
 set dummy mktemp; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3071: checking for $ac_word" >&5
+echo "configure:3099: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_have_mktemp_command'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3106,7 +3134,7 @@ else
   # Extract the first word of "makeinfo", so it can be a program name with args.
 set dummy makeinfo; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3110: checking for $ac_word" >&5
+echo "configure:3138: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3135,13 +3163,13 @@ fi
 if test -n "$MAKEINFO"; then
   # Found it, now check the version.
   echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6
-echo "configure:3139: checking for modern makeinfo" >&5
+echo "configure:3167: checking for modern makeinfo" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     ac_prog_version=`$MAKEINFO --version 2>&1 |
                    sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
-  echo "configure:3145: version of makeinfo is $ac_prog_version" >&5
+  echo "configure:3173: version of makeinfo is $ac_prog_version" >&5
   case $ac_prog_version in
     '')     gcc_cv_prog_makeinfo_modern=no;;
     4.[1-9]*)
@@ -3169,7 +3197,7 @@ fi
 
 # Is pod2man recent enough to regenerate manpages?
 echo $ac_n "checking for recent Pod::Man""... $ac_c" 1>&6
-echo "configure:3173: checking for recent Pod::Man" >&5
+echo "configure:3201: checking for recent Pod::Man" >&5
 if (perl -e 'use 1.10 Pod::Man') >/dev/null 2>&1; then
   echo "$ac_t""yes" 1>&6
   GENERATED_MANPAGES=generated-manpages		
@@ -3185,7 +3213,7 @@ else
   # Extract the first word of "flex", so it can be a program name with args.
 set dummy flex; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3189: checking for $ac_word" >&5
+echo "configure:3217: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3222,7 +3250,7 @@ else
   # Extract the first word of "bison", so it can be a program name with args.
 set dummy bison; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3226: checking for $ac_word" >&5
+echo "configure:3254: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3254,7 +3282,7 @@ fi
 # These libraries may be used by collect2.
 # We may need a special search path to get them linked.
 echo $ac_n "checking for collect2 libraries""... $ac_c" 1>&6
-echo "configure:3258: checking for collect2 libraries" >&5
+echo "configure:3286: checking for collect2 libraries" >&5
 if eval "test \"`echo '$''{'gcc_cv_collect2_libs'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3265,7 +3293,7 @@ for libs in '' -lld -lmld \
 do
 	LIBS="$libs"
 	cat > conftest.$ac_ext <<EOF
-#line 3269 "configure"
+#line 3297 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3276,7 +3304,7 @@ int main() {
 ldopen()
 ; return 0; }
 EOF
-if { (eval echo configure:3280: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3308: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gcc_cv_collect2_libs="$libs"; break
 else
@@ -3302,14 +3330,14 @@ save_LIBS="$LIBS"
 LIBS=
 
 echo $ac_n "checking for library containing exc_resume""... $ac_c" 1>&6
-echo "configure:3306: checking for library containing exc_resume" >&5
+echo "configure:3334: checking for library containing exc_resume" >&5
 if eval "test \"`echo '$''{'ac_cv_search_exc_resume'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_func_search_save_LIBS="$LIBS"
 ac_cv_search_exc_resume="no"
 cat > conftest.$ac_ext <<EOF
-#line 3313 "configure"
+#line 3341 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3320,7 +3348,7 @@ int main() {
 exc_resume()
 ; return 0; }
 EOF
-if { (eval echo configure:3324: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_exc_resume="none required"
 else
@@ -3331,7 +3359,7 @@ rm -f conftest*
 test "$ac_cv_search_exc_resume" = "no" && for i in exc; do
 LIBS="-l$i  $ac_func_search_save_LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3335 "configure"
+#line 3363 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3342,7 +3370,7 @@ int main() {
 exc_resume()
 ; return 0; }
 EOF
-if { (eval echo configure:3346: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3374: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_exc_resume="-l$i"
 break
@@ -3371,12 +3399,12 @@ LIBS="$save_LIBS"
 
 
 echo $ac_n "checking for preprocessor stringizing operator""... $ac_c" 1>&6
-echo "configure:3375: checking for preprocessor stringizing operator" >&5
+echo "configure:3403: checking for preprocessor stringizing operator" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stringize'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3380 "configure"
+#line 3408 "configure"
 #include "confdefs.h"
 
 #define x(y) #y
@@ -3409,12 +3437,12 @@ echo "$ac_t""${ac_cv_c_stringize}" 1>&6
 # Use <inttypes.h> only if it exists,
 # doesn't clash with <sys/types.h>, and declares intmax_t.
 echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
-echo "configure:3413: checking for inttypes.h" >&5
+echo "configure:3441: checking for inttypes.h" >&5
 if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3418 "configure"
+#line 3446 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <inttypes.h>
@@ -3422,7 +3450,7 @@ int main() {
 intmax_t i = -1;
 ; return 0; }
 EOF
-if { (eval echo configure:3426: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3454: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_header_inttypes_h=yes
 else
@@ -3449,12 +3477,12 @@ for ac_func in times clock dup2 kill getrlimit setrlimit atoll atoq \
         scandir alphasort
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3453: checking for $ac_func" >&5
+echo "configure:3481: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3458 "configure"
+#line 3486 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3477,7 +3505,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3481: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3509: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3503,12 +3531,12 @@ done
 
 
 echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:3507: checking for ssize_t" >&5
+echo "configure:3535: checking for ssize_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3512 "configure"
+#line 3540 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -3539,12 +3567,12 @@ fi
 # Try to determine the array type of the second argument of getgroups
 # for the target system (int or gid_t).
 echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:3543: checking for uid_t in sys/types.h" >&5
+echo "configure:3571: checking for uid_t in sys/types.h" >&5
 if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3548 "configure"
+#line 3576 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 EOF
@@ -3573,7 +3601,7 @@ EOF
 fi
 
 echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6
-echo "configure:3577: checking type of array argument to getgroups" >&5
+echo "configure:3605: checking type of array argument to getgroups" >&5
 if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3581,7 +3609,7 @@ else
   ac_cv_type_getgroups=cross
 else
   cat > conftest.$ac_ext <<EOF
-#line 3585 "configure"
+#line 3613 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Rendell for this test.  */
@@ -3606,7 +3634,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:3610: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3638: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
     ac_cv_type_getgroups=gid_t
 else
@@ -3620,7 +3648,7 @@ fi
 
 if test $ac_cv_type_getgroups = cross; then
         cat > conftest.$ac_ext <<EOF
-#line 3624 "configure"
+#line 3652 "configure"
 #include "confdefs.h"
 #include <unistd.h>
 EOF
@@ -3661,7 +3689,7 @@ fi
 
 
 echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:3665: checking whether the printf functions support %p" >&5
+echo "configure:3693: checking whether the printf functions support %p" >&5
 if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3669,7 +3697,7 @@ else
   gcc_cv_func_printf_ptr=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 3673 "configure"
+#line 3701 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 
@@ -3682,7 +3710,7 @@ int main()
   return (p != q);
 }
 EOF
-if { (eval echo configure:3686: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3714: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   gcc_cv_func_printf_ptr=yes
 else
@@ -3720,12 +3748,12 @@ case "${host}" in
   ;;
 esac
 echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:3724: checking for pid_t" >&5
+echo "configure:3752: checking for pid_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3729 "configure"
+#line 3757 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -3754,17 +3782,17 @@ fi
 
 ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:3758: checking for vfork.h" >&5
+echo "configure:3786: checking for vfork.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3763 "configure"
+#line 3791 "configure"
 #include "confdefs.h"
 #include <vfork.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3768: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3796: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3789,18 +3817,18 @@ else
 fi
 
 echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:3793: checking for working vfork" >&5
+echo "configure:3821: checking for working vfork" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:3799: checking for vfork" >&5
+echo "configure:3827: checking for vfork" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3804 "configure"
+#line 3832 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char vfork(); below.  */
@@ -3823,7 +3851,7 @@ vfork();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3827: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3855: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_vfork=yes"
 else
@@ -3845,7 +3873,7 @@ fi
 ac_cv_func_vfork_works=$ac_cv_func_vfork
 else
   cat > conftest.$ac_ext <<EOF
-#line 3849 "configure"
+#line 3877 "configure"
 #include "confdefs.h"
 /* Thanks to Paul Eggert for this test.  */
 #include <stdio.h>
@@ -3940,7 +3968,7 @@ main() {
   }
 }
 EOF
-if { (eval echo configure:3944: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_vfork_works=yes
 else
@@ -3965,12 +3993,12 @@ fi
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3969: checking for $ac_func" >&5
+echo "configure:3997: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3974 "configure"
+#line 4002 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3993,7 +4021,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3997: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4025: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4264,7 +4292,7 @@ main ()
 EOF
 
 echo $ac_n "checking for working mmap from /dev/zero""... $ac_c" 1>&6
-echo "configure:4268: checking for working mmap from /dev/zero" >&5
+echo "configure:4296: checking for working mmap from /dev/zero" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_dev_zero'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4280,11 +4308,11 @@ else
   esac
 else
   cat > conftest.$ac_ext <<EOF
-#line 4284 "configure"
+#line 4312 "configure"
 #include "confdefs.h"
 #include "ct-mmap.inc"
 EOF
-if { (eval echo configure:4288: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4316: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_dev_zero=yes
 else
@@ -4311,7 +4339,7 @@ EOF
 fi
 
 echo $ac_n "checking for working mmap with MAP_ANON(YMOUS)""... $ac_c" 1>&6
-echo "configure:4315: checking for working mmap with MAP_ANON(YMOUS)" >&5
+echo "configure:4343: checking for working mmap with MAP_ANON(YMOUS)" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_anon'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4321,12 +4349,12 @@ else
  ac_cv_func_mmap_anon=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 4325 "configure"
+#line 4353 "configure"
 #include "confdefs.h"
 #define USE_MAP_ANON
 #include "ct-mmap.inc"
 EOF
-if { (eval echo configure:4330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4358: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_anon=yes
 else
@@ -4354,7 +4382,7 @@ fi
 rm -f ct-mmap.inc
 
 echo $ac_n "checking for working mmap of a file""... $ac_c" 1>&6
-echo "configure:4358: checking for working mmap of a file" >&5
+echo "configure:4386: checking for working mmap of a file" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_file'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4369,7 +4397,7 @@ if test "$cross_compiling" = yes; then
   ac_cv_func_mmap_file=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 4373 "configure"
+#line 4401 "configure"
 #include "confdefs.h"
 
 /* Test by Zack Weinberg.  Modified from MMAP_ANYWHERE test by
@@ -4406,7 +4434,7 @@ int main()
   exit(0);
 }
 EOF
-if { (eval echo configure:4410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4438: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_file=yes
 else
@@ -4445,7 +4473,7 @@ fi
 
 
   echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:4449: checking for iconv" >&5
+echo "configure:4477: checking for iconv" >&5
 if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4453,7 +4481,7 @@ else
     am_cv_func_iconv="no, consider installing GNU libiconv"
     am_cv_lib_iconv=no
     cat > conftest.$ac_ext <<EOF
-#line 4457 "configure"
+#line 4485 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <iconv.h>
@@ -4463,7 +4491,7 @@ iconv_t cd = iconv_open("","");
        iconv_close(cd);
 ; return 0; }
 EOF
-if { (eval echo configure:4467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_func_iconv=yes
 else
@@ -4475,7 +4503,7 @@ rm -f conftest*
       am_save_LIBS="$LIBS"
       LIBS="$LIBS $am_cv_libiconv_ldpath -liconv"
       cat > conftest.$ac_ext <<EOF
-#line 4479 "configure"
+#line 4507 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <iconv.h>
@@ -4485,7 +4513,7 @@ iconv_t cd = iconv_open("","");
          iconv_close(cd);
 ; return 0; }
 EOF
-if { (eval echo configure:4489: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_lib_iconv=yes
         am_cv_func_iconv=yes
@@ -4506,13 +4534,13 @@ echo "$ac_t""$am_cv_func_iconv" 1>&6
 EOF
 
     echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
-echo "configure:4510: checking for iconv declaration" >&5
+echo "configure:4538: checking for iconv declaration" >&5
     if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   
       cat > conftest.$ac_ext <<EOF
-#line 4516 "configure"
+#line 4544 "configure"
 #include "confdefs.h"
 
 #include <stdlib.h>
@@ -4531,7 +4559,7 @@ int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:4535: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4563: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   am_cv_proto_iconv_arg1=""
 else
@@ -4569,12 +4597,12 @@ for ac_func in getenv atol sbrk abort atof getcwd getwd \
 do
   ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4573: checking whether $ac_func is declared" >&5
+echo "configure:4601: checking whether $ac_func is declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4578 "configure"
+#line 4606 "configure"
 #include "confdefs.h"
 #undef $ac_tr_decl
 #define $ac_tr_decl 1
@@ -4588,7 +4616,7 @@ char *(*pfn) = (char *(*)) $ac_func ;
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:4592: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4620: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_have_decl_$ac_func=yes"
 else
@@ -4687,12 +4715,12 @@ for ac_func in getrlimit setrlimit getrusage
 do
   ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4691: checking whether $ac_func is declared" >&5
+echo "configure:4719: checking whether $ac_func is declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4696 "configure"
+#line 4724 "configure"
 #include "confdefs.h"
 #undef $ac_tr_decl
 #define $ac_tr_decl 1
@@ -4710,7 +4738,7 @@ char *(*pfn) = (char *(*)) $ac_func ;
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:4714: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4742: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_have_decl_$ac_func=yes"
 else
@@ -4752,12 +4780,12 @@ for ac_func in times
 do
   ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4756: checking whether $ac_func is declared" >&5
+echo "configure:4784: checking whether $ac_func is declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4761 "configure"
+#line 4789 "configure"
 #include "confdefs.h"
 #undef $ac_tr_decl
 #define $ac_tr_decl 1
@@ -4775,7 +4803,7 @@ char *(*pfn) = (char *(*)) $ac_func ;
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:4779: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4807: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_have_decl_$ac_func=yes"
 else
@@ -4809,13 +4837,13 @@ fi
 
 # More time-related stuff.
 echo $ac_n "checking for struct tms""... $ac_c" 1>&6
-echo "configure:4813: checking for struct tms" >&5
+echo "configure:4841: checking for struct tms" >&5
 if eval "test \"`echo '$''{'ac_cv_struct_tms'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   
 cat > conftest.$ac_ext <<EOF
-#line 4819 "configure"
+#line 4847 "configure"
 #include "confdefs.h"
 
 #include "ansidecl.h"
@@ -4828,7 +4856,7 @@ int main() {
 struct tms tms;
 ; return 0; }
 EOF
-if { (eval echo configure:4832: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4860: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_struct_tms=yes
 else
@@ -4851,13 +4879,13 @@ fi
 # use gcc_cv_* here because this doesn't match the behavior of AC_CHECK_TYPE.
 # revisit after autoconf 2.50.
 echo $ac_n "checking for clock_t""... $ac_c" 1>&6
-echo "configure:4855: checking for clock_t" >&5
+echo "configure:4883: checking for clock_t" >&5
 if eval "test \"`echo '$''{'gcc_cv_type_clock_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   
 cat > conftest.$ac_ext <<EOF
-#line 4861 "configure"
+#line 4889 "configure"
 #include "confdefs.h"
 
 #include "ansidecl.h"
@@ -4867,7 +4895,7 @@ int main() {
 clock_t x;
 ; return 0; }
 EOF
-if { (eval echo configure:4871: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4899: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_type_clock_t=yes
 else
@@ -4892,12 +4920,12 @@ CFLAGS="$saved_CFLAGS"
 
 # mkdir takes a single argument on some systems. 
 echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:4896: checking if mkdir takes one argument" >&5
+echo "configure:4924: checking if mkdir takes one argument" >&5
 if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4901 "configure"
+#line 4929 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -4914,7 +4942,7 @@ int main() {
 mkdir ("foo", 0);
 ; return 0; }
 EOF
-if { (eval echo configure:4918: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4946: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_mkdir_takes_one_arg=no
 else
@@ -5191,14 +5219,14 @@ fi
 
             
 echo $ac_n "checking for library containing strerror""... $ac_c" 1>&6
-echo "configure:5195: checking for library containing strerror" >&5
+echo "configure:5223: checking for library containing strerror" >&5
 if eval "test \"`echo '$''{'ac_cv_search_strerror'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_func_search_save_LIBS="$LIBS"
 ac_cv_search_strerror="no"
 cat > conftest.$ac_ext <<EOF
-#line 5202 "configure"
+#line 5230 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -5209,7 +5237,7 @@ int main() {
 strerror()
 ; return 0; }
 EOF
-if { (eval echo configure:5213: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5241: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_strerror="none required"
 else
@@ -5220,7 +5248,7 @@ rm -f conftest*
 test "$ac_cv_search_strerror" = "no" && for i in cposix; do
 LIBS="-l$i  $ac_func_search_save_LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 5224 "configure"
+#line 5252 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -5231,7 +5259,7 @@ int main() {
 strerror()
 ; return 0; }
 EOF
-if { (eval echo configure:5235: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5263: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_strerror="-l$i"
 break
@@ -5254,12 +5282,12 @@ fi
   
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:5258: checking for working const" >&5
+echo "configure:5286: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5263 "configure"
+#line 5291 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -5308,7 +5336,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5312: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5340: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -5329,12 +5357,12 @@ EOF
 fi
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:5333: checking for off_t" >&5
+echo "configure:5361: checking for off_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5338 "configure"
+#line 5366 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -5362,12 +5390,12 @@ EOF
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:5366: checking for size_t" >&5
+echo "configure:5394: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5371 "configure"
+#line 5399 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -5397,19 +5425,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:5401: checking for working alloca.h" >&5
+echo "configure:5429: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5406 "configure"
+#line 5434 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:5413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5441: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -5430,12 +5458,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:5434: checking for alloca" >&5
+echo "configure:5462: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5439 "configure"
+#line 5467 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -5463,7 +5491,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:5467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -5495,12 +5523,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:5499: checking whether alloca needs Cray hooks" >&5
+echo "configure:5527: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5504 "configure"
+#line 5532 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -5525,12 +5553,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5529: checking for $ac_func" >&5
+echo "configure:5557: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5534 "configure"
+#line 5562 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5553,7 +5581,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:5557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5585: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5580,7 +5608,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:5584: checking stack direction for C alloca" >&5
+echo "configure:5612: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5588,7 +5616,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 5592 "configure"
+#line 5620 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -5607,7 +5635,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:5611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5639: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -5630,12 +5658,12 @@ fi
 
 
     echo $ac_n "checking whether we are using the GNU C Library 2.1 or newer""... $ac_c" 1>&6
-echo "configure:5634: checking whether we are using the GNU C Library 2.1 or newer" >&5
+echo "configure:5662: checking whether we are using the GNU C Library 2.1 or newer" >&5
 if eval "test \"`echo '$''{'ac_cv_gnu_library_2_1'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5639 "configure"
+#line 5667 "configure"
 #include "confdefs.h"
 
 #include <features.h>
@@ -5671,17 +5699,17 @@ stdlib.h string.h unistd.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5675: checking for $ac_hdr" >&5
+echo "configure:5703: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5680 "configure"
+#line 5708 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5685: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5713: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5712,12 +5740,12 @@ getgid getuid mempcpy munmap putenv setenv setlocale stpcpy strchr strcasecmp \
 strdup strtoul tsearch __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5716: checking for $ac_func" >&5
+echo "configure:5744: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5721 "configure"
+#line 5749 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5740,7 +5768,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:5744: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5772: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5781,7 +5809,7 @@ fi
 
 
   echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:5785: checking for iconv" >&5
+echo "configure:5813: checking for iconv" >&5
 if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5789,7 +5817,7 @@ else
     am_cv_func_iconv="no, consider installing GNU libiconv"
     am_cv_lib_iconv=no
     cat > conftest.$ac_ext <<EOF
-#line 5793 "configure"
+#line 5821 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <iconv.h>
@@ -5799,7 +5827,7 @@ iconv_t cd = iconv_open("","");
        iconv_close(cd);
 ; return 0; }
 EOF
-if { (eval echo configure:5803: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_func_iconv=yes
 else
@@ -5811,7 +5839,7 @@ rm -f conftest*
       am_save_LIBS="$LIBS"
       LIBS="$LIBS $am_cv_libiconv_ldpath -liconv"
       cat > conftest.$ac_ext <<EOF
-#line 5815 "configure"
+#line 5843 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <iconv.h>
@@ -5821,7 +5849,7 @@ iconv_t cd = iconv_open("","");
          iconv_close(cd);
 ; return 0; }
 EOF
-if { (eval echo configure:5825: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5853: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_lib_iconv=yes
         am_cv_func_iconv=yes
@@ -5842,13 +5870,13 @@ echo "$ac_t""$am_cv_func_iconv" 1>&6
 EOF
 
     echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
-echo "configure:5846: checking for iconv declaration" >&5
+echo "configure:5874: checking for iconv declaration" >&5
     if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   
       cat > conftest.$ac_ext <<EOF
-#line 5852 "configure"
+#line 5880 "configure"
 #include "confdefs.h"
 
 #include <stdlib.h>
@@ -5867,7 +5895,7 @@ int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:5871: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5899: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   am_cv_proto_iconv_arg1=""
 else
@@ -5896,19 +5924,19 @@ EOF
 
    
   echo $ac_n "checking for nl_langinfo and CODESET""... $ac_c" 1>&6
-echo "configure:5900: checking for nl_langinfo and CODESET" >&5
+echo "configure:5928: checking for nl_langinfo and CODESET" >&5
 if eval "test \"`echo '$''{'am_cv_langinfo_codeset'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5905 "configure"
+#line 5933 "configure"
 #include "confdefs.h"
 #include <langinfo.h>
 int main() {
 char* cs = nl_langinfo(CODESET);
 ; return 0; }
 EOF
-if { (eval echo configure:5912: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5940: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_langinfo_codeset=yes
 else
@@ -5931,19 +5959,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:5935: checking for LC_MESSAGES" >&5
+echo "configure:5963: checking for LC_MESSAGES" >&5
 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5940 "configure"
+#line 5968 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:5947: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -5964,7 +5992,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:5968: checking whether NLS is requested" >&5
+echo "configure:5996: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -5987,7 +6015,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:5991: checking whether included gettext is requested" >&5
+echo "configure:6019: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -6007,17 +6035,17 @@ fi
 
 	ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:6011: checking for libintl.h" >&5
+echo "configure:6039: checking for libintl.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6016 "configure"
+#line 6044 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6021: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6049: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6038,12 +6066,12 @@ if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
 EOF
 
            echo $ac_n "checking for GNU gettext in libc""... $ac_c" 1>&6
-echo "configure:6042: checking for GNU gettext in libc" >&5
+echo "configure:6070: checking for GNU gettext in libc" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6047 "configure"
+#line 6075 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 extern int _nl_msg_cat_cntr;
@@ -6052,7 +6080,7 @@ bindtextdomain ("", "");
 return (int) gettext ("") + _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:6056: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6084: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gnugettext1_libc=yes
 else
@@ -6068,14 +6096,14 @@ echo "$ac_t""$gt_cv_func_gnugettext1_libc" 1>&6
 
 	   if test "$gt_cv_func_gnugettext1_libc" != "yes"; then
 	     echo $ac_n "checking for GNU gettext in libintl""... $ac_c" 1>&6
-echo "configure:6072: checking for GNU gettext in libintl" >&5
+echo "configure:6100: checking for GNU gettext in libintl" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   gt_save_LIBS="$LIBS"
 		LIBS="$LIBS -lintl $LIBICONV"
 		cat > conftest.$ac_ext <<EOF
-#line 6079 "configure"
+#line 6107 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 extern int _nl_msg_cat_cntr;
@@ -6084,7 +6112,7 @@ bindtextdomain ("", "");
 return (int) gettext ("") + _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:6088: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6116: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gnugettext1_libintl=yes
 else
@@ -6117,12 +6145,12 @@ EOF
 	     for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6121: checking for $ac_func" >&5
+echo "configure:6149: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6126 "configure"
+#line 6154 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -6145,7 +6173,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:6149: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6177: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -6174,7 +6202,7 @@ done
 	     	     # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6178: checking for $ac_word" >&5
+echo "configure:6206: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6208,7 +6236,7 @@ fi
 	     # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6212: checking for $ac_word" >&5
+echo "configure:6240: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6245,7 +6273,7 @@ fi
 	     	     # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6249: checking for $ac_word" >&5
+echo "configure:6277: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6295,7 +6323,7 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6299: checking for $ac_word" >&5
+echo "configure:6327: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6329,7 +6357,7 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6333: checking for $ac_word" >&5
+echo "configure:6361: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6365,7 +6393,7 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6369: checking for $ac_word" >&5
+echo "configure:6397: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6437,7 +6465,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6441: checking for $ac_word" >&5
+echo "configure:6469: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_INTLBISON'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6470,7 +6498,7 @@ done
       ac_verc_fail=yes
     else
             echo $ac_n "checking version of bison""... $ac_c" 1>&6
-echo "configure:6474: checking version of bison" >&5
+echo "configure:6502: checking version of bison" >&5
       ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
       case $ac_prog_version in
         '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
@@ -6515,7 +6543,7 @@ EOF
 
          if test "x$CATOBJEXT" != x; then
      echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:6519: checking for catalogs to be installed" >&5
+echo "configure:6547: checking for catalogs to be installed" >&5
      # Look for .po and .gmo files in the source directory.
      CATALOGS=
      XLINGUAS=
@@ -6573,7 +6601,7 @@ fi
 case $host_os in
 	win32 | pe | cygwin* | mingw32* | uwin*)
 echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:6577: checking whether windows registry support is requested" >&5
+echo "configure:6605: checking whether windows registry support is requested" >&5
 if test "x$enable_win32_registry" != xno; then
   cat >> confdefs.h <<\EOF
 #define ENABLE_WIN32_REGISTRY 1
@@ -6582,14 +6610,14 @@ EOF
   echo "$ac_t""yes" 1>&6
   
 echo $ac_n "checking for library containing RegOpenKeyExA""... $ac_c" 1>&6
-echo "configure:6586: checking for library containing RegOpenKeyExA" >&5
+echo "configure:6614: checking for library containing RegOpenKeyExA" >&5
 if eval "test \"`echo '$''{'ac_cv_search_RegOpenKeyExA'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_func_search_save_LIBS="$LIBS"
 ac_cv_search_RegOpenKeyExA="no"
 cat > conftest.$ac_ext <<EOF
-#line 6593 "configure"
+#line 6621 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -6600,7 +6628,7 @@ int main() {
 RegOpenKeyExA()
 ; return 0; }
 EOF
-if { (eval echo configure:6604: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_RegOpenKeyExA="none required"
 else
@@ -6611,7 +6639,7 @@ rm -f conftest*
 test "$ac_cv_search_RegOpenKeyExA" = "no" && for i in advapi32; do
 LIBS="-l$i  $ac_func_search_save_LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 6615 "configure"
+#line 6643 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -6622,7 +6650,7 @@ int main() {
 RegOpenKeyExA()
 ; return 0; }
 EOF
-if { (eval echo configure:6626: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_RegOpenKeyExA="-l$i"
 break
@@ -6664,7 +6692,7 @@ esac
 
 if test "x$enable_win32_registry" != xno; then
   echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:6668: checking registry key on windows hosts" >&5
+echo "configure:6696: checking registry key on windows hosts" >&5
   cat >> confdefs.h <<EOF
 #define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
 EOF
@@ -6878,7 +6906,7 @@ fi
 
 # Figure out what assembler we will be using.
 echo $ac_n "checking what assembler to use""... $ac_c" 1>&6
-echo "configure:6882: checking what assembler to use" >&5
+echo "configure:6910: checking what assembler to use" >&5
 gcc_cv_as=
 gcc_cv_gas_major_version=
 gcc_cv_gas_minor_version=
@@ -6972,7 +7000,7 @@ fi
 
 # Figure out what linker we will be using.
 echo $ac_n "checking what linker to use""... $ac_c" 1>&6
-echo "configure:6976: checking what linker to use" >&5
+echo "configure:7004: checking what linker to use" >&5
 gcc_cv_ld=
 gcc_cv_gld_major_version=
 gcc_cv_gld_minor_version=
@@ -7065,7 +7093,7 @@ fi
 
 # Figure out what nm we will be using.
 echo $ac_n "checking what nm to use""... $ac_c" 1>&6
-echo "configure:7069: checking what nm to use" >&5
+echo "configure:7097: checking what nm to use" >&5
 if test -x nm$host_exeext; then
 	gcc_cv_nm=./nm$host_exeext
 elif test "x$program_prefix" != xNONE; then
@@ -7077,7 +7105,7 @@ echo "$ac_t""$gcc_cv_nm" 1>&6
 
 # Figure out what objdump we will be using.
 echo $ac_n "checking what objdump to use""... $ac_c" 1>&6
-echo "configure:7081: checking what objdump to use" >&5
+echo "configure:7109: checking what objdump to use" >&5
 if test -x objdump$host_exeext; then
 	gcc_cv_objdump=./objdump$host_exeext
 elif test "x$program_prefix" != xNONE; then
@@ -7089,7 +7117,7 @@ echo "$ac_t""$gcc_cv_objdump" 1>&6
 
 # Figure out what assembler alignment features are present.
 echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:7093: checking assembler alignment features" >&5
+echo "configure:7121: checking assembler alignment features" >&5
 gcc_cv_as_alignment_features=none
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
 	# Gas version 2.6 and later support for .balign and .p2align.
@@ -7137,7 +7165,7 @@ fi
 echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
 
 echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:7141: checking assembler subsection support" >&5
+echo "configure:7169: checking assembler subsection support" >&5
 gcc_cv_as_subsections=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
   if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
@@ -7177,7 +7205,7 @@ fi
 echo "$ac_t""$gcc_cv_as_subsections" 1>&6
 
 echo $ac_n "checking assembler weak support""... $ac_c" 1>&6
-echo "configure:7181: checking assembler weak support" >&5
+echo "configure:7209: checking assembler weak support" >&5
 gcc_cv_as_weak=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
   if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 2 -o "$gcc_cv_gas_major_version" -gt 2; then
@@ -7200,7 +7228,7 @@ fi
 echo "$ac_t""$gcc_cv_as_weak" 1>&6
 
 echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6
-echo "configure:7204: checking assembler hidden support" >&5
+echo "configure:7232: checking assembler hidden support" >&5
 gcc_cv_as_hidden=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
   if test "$gcc_cv_gas_major_version" -eq 2	\
@@ -7272,7 +7300,7 @@ esac
 
 
 echo $ac_n "checking assembler leb128 support""... $ac_c" 1>&6
-echo "configure:7276: checking assembler leb128 support" >&5
+echo "configure:7304: checking assembler leb128 support" >&5
 gcc_cv_as_leb128=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
   if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 11 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
@@ -7317,7 +7345,7 @@ fi
 echo "$ac_t""$gcc_cv_as_leb128" 1>&6
 
 echo $ac_n "checking assembler eh_frame optimization""... $ac_c" 1>&6
-echo "configure:7321: checking assembler eh_frame optimization" >&5
+echo "configure:7349: checking assembler eh_frame optimization" >&5
 gcc_cv_as_eh_frame=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
   if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 12 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
@@ -7398,7 +7426,7 @@ fi
 echo "$ac_t""$gcc_cv_as_eh_frame" 1>&6
 
 echo $ac_n "checking assembler section merging support""... $ac_c" 1>&6
-echo "configure:7402: checking assembler section merging support" >&5
+echo "configure:7430: checking assembler section merging support" >&5
 gcc_cv_as_shf_merge=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
   if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 12 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
@@ -7421,7 +7449,7 @@ fi
 echo "$ac_t""$gcc_cv_as_shf_merge" 1>&6
 
 echo $ac_n "checking assembler thread-local storage support""... $ac_c" 1>&6
-echo "configure:7425: checking assembler thread-local storage support" >&5
+echo "configure:7453: checking assembler thread-local storage support" >&5
 gcc_cv_as_tls=no
 conftest_s=
 tls_first_major=
@@ -7513,7 +7541,7 @@ case "$target" in
   # All TARGET_ABI_OSF targets.
   alpha*-*-osf* | alpha*-*-linux* | alpha*-*-*bsd*)
     echo $ac_n "checking assembler supports explicit relocations""... $ac_c" 1>&6
-echo "configure:7517: checking assembler supports explicit relocations" >&5
+echo "configure:7545: checking assembler supports explicit relocations" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_explicit_relocs'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7563,7 +7591,7 @@ EOF
     ;;
   sparc*-*-*)
     echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:7567: checking assembler .register pseudo-op support" >&5
+echo "configure:7595: checking assembler .register pseudo-op support" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7591,7 +7619,7 @@ EOF
     fi
 
     echo $ac_n "checking assembler supports -relax""... $ac_c" 1>&6
-echo "configure:7595: checking assembler supports -relax" >&5
+echo "configure:7623: checking assembler supports -relax" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_relax_opt'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7619,7 +7647,7 @@ EOF
     fi
 
     echo $ac_n "checking assembler and linker support unaligned pc related relocs""... $ac_c" 1>&6
-echo "configure:7623: checking assembler and linker support unaligned pc related relocs" >&5
+echo "configure:7651: checking assembler and linker support unaligned pc related relocs" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7646,7 +7674,7 @@ EOF
     fi
 
     echo $ac_n "checking assembler and linker support unaligned pc related relocs against hidden symbols""... $ac_c" 1>&6
-echo "configure:7650: checking assembler and linker support unaligned pc related relocs against hidden symbols" >&5
+echo "configure:7678: checking assembler and linker support unaligned pc related relocs against hidden symbols" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel_hidden'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7687,7 +7715,7 @@ EOF
 
     if test "x$gcc_cv_as_flags64" != xno; then
 	echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:7691: checking for assembler offsetable %lo() support" >&5
+echo "configure:7719: checking for assembler offsetable %lo() support" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7727,7 +7755,7 @@ EOF
 
   i[34567]86-*-* | x86_64-*-*)
     echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:7731: checking assembler instructions" >&5
+echo "configure:7759: checking assembler instructions" >&5
     gcc_cv_as_instructions=
     if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
       if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2; then
@@ -7754,7 +7782,7 @@ EOF
     echo "$ac_t""$gcc_cv_as_instructions" 1>&6
 
     echo $ac_n "checking assembler GOTOFF in data directives""... $ac_c" 1>&6
-echo "configure:7758: checking assembler GOTOFF in data directives" >&5
+echo "configure:7786: checking assembler GOTOFF in data directives" >&5
     gcc_cv_as_gotoff_in_data=no
     if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x
     then
@@ -7784,7 +7812,7 @@ EOF
 esac
 
 echo $ac_n "checking assembler dwarf2 debug_line support""... $ac_c" 1>&6
-echo "configure:7788: checking assembler dwarf2 debug_line support" >&5
+echo "configure:7816: checking assembler dwarf2 debug_line support" >&5
 gcc_cv_as_dwarf2_debug_line=no
 # ??? Not all targets support dwarf2 debug_line, even within a version
 # of gas.  Moreover, we need to emit a valid instruction to trigger any
@@ -7840,7 +7868,7 @@ fi
 echo "$ac_t""$gcc_cv_as_dwarf2_debug_line" 1>&6
 
 echo $ac_n "checking assembler --gdwarf2 support""... $ac_c" 1>&6
-echo "configure:7844: checking assembler --gdwarf2 support" >&5
+echo "configure:7872: checking assembler --gdwarf2 support" >&5
 gcc_cv_as_gdwarf2_flag=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x;
 then
@@ -7869,7 +7897,7 @@ fi
 echo "$ac_t""$gcc_cv_as_gdwarf2_flag" 1>&6
 
 echo $ac_n "checking assembler --gstabs support""... $ac_c" 1>&6
-echo "configure:7873: checking assembler --gstabs support" >&5
+echo "configure:7901: checking assembler --gstabs support" >&5
 gcc_cv_as_gstabs_flag=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x;
 then
@@ -7897,7 +7925,7 @@ fi
 echo "$ac_t""$gcc_cv_as_gstabs_flag" 1>&6
 
 echo $ac_n "checking linker PT_GNU_EH_FRAME support""... $ac_c" 1>&6
-echo "configure:7901: checking linker PT_GNU_EH_FRAME support" >&5
+echo "configure:7929: checking linker PT_GNU_EH_FRAME support" >&5
 gcc_cv_ld_eh_frame_hdr=no
 if test x$gcc_cv_gld_major_version != x -a x$gcc_cv_gld_minor_version != x; then
   if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 12 -o "$gcc_cv_gld_major_version" -gt 2 && grep 'EMUL = elf' ../ld/Makefile > /dev/null; then
@@ -7921,7 +7949,7 @@ echo "$ac_t""$gcc_cv_ld_eh_frame_hdr" 1>&6
 case "$target" in
   mips*-*-*)
     echo $ac_n "checking whether libgloss uses STARTUP directives consistently""... $ac_c" 1>&6
-echo "configure:7925: checking whether libgloss uses STARTUP directives consistently" >&5
+echo "configure:7953: checking whether libgloss uses STARTUP directives consistently" >&5
     gcc_cv_mips_libgloss_startup=no
     gcc_cv_libgloss_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/libgloss
     if test "x$exec_prefix" = xNONE; then
@@ -8125,7 +8153,7 @@ fi
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:8129: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:8157: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -8636,6 +8664,7 @@ s%@oldincludedir@%$oldincludedir%g
 s%@infodir@%$infodir%g
 s%@mandir@%$mandir%g
 s%@enable_multilib@%$enable_multilib%g
+s%@coverage_flags@%$coverage_flags%g
 s%@enable_shared@%$enable_shared%g
 s%@host@%$host%g
 s%@host_alias@%$host_alias%g

gcc/configure.in

@@ -254,6 +254,28 @@ if test x$ac_gc_always_collect != x ; then
    every opportunity.  This is extremely expensive.])
 fi
 
+# Enable code coverage collection
+AC_ARG_ENABLE(coverage,
+[  --enable-coverage[=LEVEL]
+			  enable compiler\'s code coverage collection.
+			  Use to measure compiler performance and locate
+			  unused parts of the compiler. With LEVEL, specificy
+			  optimization. Values are opt, noopt,
+			  default is noopt],
+[case "${enableval}" in
+yes|noopt)
+	coverage_flags="-fprofile-arcs -ftest-coverage -O0"
+	;;
+opt)
+	coverage_flags="-fprofile-arcs -ftest-coverage -O2"
+	;;
+*)
+	AC_MSG_ERROR(unknown coverage setting $enableval)
+	;;
+esac],
+[coverage_flags="-O2"])
+AC_SUBST(coverage_flags)
+
 AC_ARG_WITH(cpp_install_dir,
 [  --with-cpp-install-dir=DIR
                           install the user visible C preprocessor in DIR

gcc/cp/ChangeLog

+2002-08-08  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* cp/Make-lang.in (c++.mostlyclean): Remove coverage files.
+
 2002-08-07  Mark Mitchell  <mark@codesourcery.com>
 
 	Rework build_component_ref.

gcc/cp/Make-lang.in

@@ -225,6 +225,7 @@ c++.uninstall:
 
 c++.mostlyclean:
 	-rm -f cp/*$(objext) $(DEMANGLER_PROG)
+	-rm -f cp/*$(coverageexts)
 c++.clean:
 c++.distclean:
 	-rm -f cp/config.status cp/Makefile

gcc/doc/install.texi

@@ -782,6 +782,17 @@ specifying @var{list}; the categories of checks available are
 default when @var{list} is not specified is @samp{misc,tree,gc,rtlflag}; the
 checks @samp{rtl} and @samp{gcac} are very expensive.
 
+@item --enable-coverage
+@item --enable-coverage=@var{level}
+With this option, the compiler is built to collect self coverage
+information, every time it is run. This is for internal development
+purposes, and only works when the compiler is being built with gcc. The
+@var{level} argument controls whether the compiler is built optimized or
+not, values are @samp{opt} and @samp{noopt}. For coverage analysis you
+want to disable optimization, for performance analysis you want to
+enable optimization. When coverage is enabled, the default level is
+without optimization.
+
 @item --enable-nls
 @itemx --disable-nls
 The @option{--enable-nls} option enables Native Language Support (NLS),

gcc/f/ChangeLog

+Thu Aug  8 10:06:14 2002  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* f/Make-lang.in (f.mostlyclean): Remove coverage files.
+
 2002-08-06  Gerald Pfeifer  <pfeifer@dbai.tuwien.ac.at>
 
 	* g77.texi (Top): Rename Index to Keyword Index.

gcc/f/Make-lang.in

@@ -315,6 +315,7 @@ f77.uninstall: installdirs
 
 f77.mostlyclean:
 	-rm -f f/*$(objext)
+	-rm -f f/*$(coverageexts)
 	-rm -f f/fini$(build_exeext) f/stamp-str f/str-*.h f/str-*.j
 	-rm -f f/intdoc$(build_exeext) f/ansify$(build_exeext) f/intdoc.h0
 	-rm -f g77.aux g77.cps g77.ky g77.toc g77.vr g77.fn g77.kys \

gcc/java/ChangeLog

+2002-08-08  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* java/Make-lang.in (java.mostlyclean): Remove coverage files.
+
 2002-08-05  Geoffrey Keating  <geoffk@redhat.com>
 
 	* mangle_name.c: Don't include obstack.h twice.

gcc/java/Make-lang.in

@@ -227,6 +227,7 @@ java.install-info: installdirs
 
 java.mostlyclean:
 	-rm -f java/*$(objext) $(DEMANGLER_PROG)
+	-rm -f java/*$(coverageexts)
 	-rm -f jc1$(exeext) $(GCJ)$(exeext) jvgenmain$(exeext) gcjh$(exeext) jv-scan$(exeext) jcf-dump$(exeext) s-java
 java.clean:
 java.distclean:

gcc/objc/Make-lang.in

@@ -131,6 +131,7 @@ objc.uninstall:
 objc.mostlyclean:
 	-rm -f tmp-objc-prs.y
 	-rm -f objc/*$(objext) objc/xforward objc/fflags
+	-rm -f objc/*$(coverageexts)
 objc.clean: objc.mostlyclean
 	-rm -rf objc-headers
 objc.distclean:

gcc/treelang/ChangeLog

+2002-08-08  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* treelang/Make-lang.in (treelang.mostlyclean): Remove coverage files.
+
 2002-07-11  Tim Josling  <tej@melbpc.org.au>
 
 	Remove front end hard coding from gengtype.c.  

gcc/treelang/Make-lang.in

@@ -207,7 +207,8 @@ treelang.mostlyclean:
 	    rm -f treelang/$$name$(exeext); \
 	  fi ; \
 	done
-	-rm -f treelang/*.o
+	-rm -f treelang/*$(objext)
+	-rm -f treelang/*$(coverageexts)
 	-rm treelang.done